| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/patm/@/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/patm/@/dev/isci/scil/sati_mode_pages.c |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/sati_mode_pages.c 231689 2012-02-14 15:58:49Z jimharris $");
/**
* @file
* @brief This file contains the mode page constants and data for the mode
* pages supported by this translation implementation.
*/
// DO NOT MOVE THIS INCLUDE STATEMENT! This include must occur before
// the below check for ENABLE_SATI_MODE_PAGES.
#include <dev/isci/scil/sati_types.h>
#if defined(ENABLE_SATI_MODE_PAGES)
#include <dev/isci/scil/sati_mode_pages.h>
#include <dev/isci/scil/intel_scsi.h>
//******************************************************************************
//* C O N S T A N T S
//******************************************************************************
#define SCSI_MODE_PAGE19_SAS_ID 0x6
#define SCSI_MODE_PAGE19_SUB1_PAGE_NUM 0x1
#define SCSI_MODE_PAGE19_SUB1_PC 0x59
//******************************************************************************
//* M O D E P A G E S
//******************************************************************************
U8 sat_default_mode_page_01[] =
{
SCSI_MODE_PAGE_READ_WRITE_ERROR, // Byte 0 - Page Code, SPF(0), PS(0)
SCSI_MODE_PAGE_01_LENGTH-2, // Byte 1 - Page Length
0x80, // Byte 2 - AWRE, ARRE, TB, RC, EER, PER, DTE, DCR
0x00, // Byte 3 - Read Retry Count
0x00, // Byte 4 - Obsolete
0x00, // Byte 5 - Obsolete
0x00, // Byte 6 - Obsolete
0x00, // Byte 7 - Restricted for MMC-4
0x00, // Byte 8 - Write Retry Count
0x00, // Byte 9 - Reserved
0x00, // Byte 10 - Recovery Time Limit
0x00, // Byte 11
};
U8 sat_changeable_mode_page_01[] =
{
SCSI_MODE_PAGE_READ_WRITE_ERROR,
SCSI_MODE_PAGE_01_LENGTH-2,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
};
U8 sat_default_mode_page_02[] =
{
SCSI_MODE_PAGE_DISCONNECT_RECONNECT, // Byte 0 - Page Code, SPF(0), PS(0)
SCSI_MODE_PAGE_02_LENGTH-2, // Byte 1 - Page Length
0x00, // Byte 2 - Buffer Full Ratio
0x00, // Byte 3 - Buffer Empty Ratio
0x00, // Byte 4 - Bus Inactivity Limit
0x00, // Byte 5
0x00, // Byte 6 - Disconnect Time Limit
0x00, // Byte 7
0x00, // Byte 8 - Connect Time Limit
0x00, // Byte 9
0x00, // Byte 10 - Maximum Burst Size
0x00, // Byte 11
0x00, // Byte 12 - EMDP, FAIR_ARB, DIMM, DTDC
0x00, // Byte 13
0x00, // Byte 14 - First Burst Size
0x00, // Byte 15
};
U8 sat_changeable_mode_page_02[] =
{
SCSI_MODE_PAGE_DISCONNECT_RECONNECT,
SCSI_MODE_PAGE_02_LENGTH-2,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
};
U8 sat_default_mode_page_08[] =
{
SCSI_MODE_PAGE_CACHING, // Byte 0 - Page Code, SPF(0), PS(0)
SCSI_MODE_PAGE_08_LENGTH-2, // Byte 1 - Page Length
0x00, // Byte 2 - IC, ABPF, CAP, DISC, SIZE, WCE(1), MF, RCD
0x00, // Byte 3 - Demand Read Retention Priority, Write Retention Priority
0x00, // Byte 4 - Disable Pre-Fetch Transfer Length
0x00, // Byte 5
0x00, // Byte 6 - Minimum Pre-Fetch
0x00, // Byte 7
0x00, // Byte 8 - Maximum Pre-Fetch
0x00, // Byte 9
0x00, // Byte 10 - Maximum Pre-Fetch Ceiling
0x00, // Byte 11
0x00, // Byte 12 - FSW, LBCSS, DRA(0), Vendor Specific, NV_DIS
0x00, // Byte 13 - Number of Cache Segments
0x00, // Byte 14 - Cache Segment Size
0x00, // Byte 15
0x00, // Byte 16 - Reserved
0x00, // Byte 17 - Non-Cache Segment Size
0x00, // Byte 18
0x00, // PAD
};
U8 sat_changeable_mode_page_08[] =
{
SCSI_MODE_PAGE_CACHING,
SCSI_MODE_PAGE_08_LENGTH-2,
SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00, // PAD
};
U8 sat_default_mode_page_0A[] =
{
SCSI_MODE_PAGE_CONTROL, // Byte 0 - Page Code, SPF(0), PS(0)
SCSI_MODE_PAGE_0A_LENGTH-2, // Byte 1 - Page Length
0x00, // Byte 2 - TST(0), TMF_ONLY(0), D_SENSE(0), GLTSD(0), RLEC(0)
0x10, // Byte 3 - Queue Algorithm(0), QErr(0)
0x00, // Byte 4 - TAS(0), RAC(0), UA_(0), SWP(0)
0x00, // Byte 5 - ATO(0), AUTOLOAD(0)
0x00, // Byte 6
0x00, // Byte 7
0xFF, // Byte 8 - Unlimited Busy timeout
0xFF, // Byte 9
0x00, // Byte 10 - do not support self time compl time xlation
0x00, // Byte 11
};
U8 sat_changeable_mode_page_0A[] =
{
SCSI_MODE_PAGE_CONTROL,
SCSI_MODE_PAGE_0A_LENGTH-2,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
};
U8 sat_default_mode_page_19[] =
{
SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT, // Byte 0 - PS, SPF, Page Code
SCSI_MODE_PAGE_19_LENGTH-2, // Byte 1 - Page Length
SCSI_MODE_PAGE19_SAS_ID, // Byte 2 - Rsvd, READY_LED, ProtoID
0x00, // PAD
0xFF, // Byte 4 - IT NLT MSB, 0xFF retry forever
0xFF, // Byte 5 - IT NLT LSB, 0xFF retry forever
0x00, // Byte 6 - IRT MSB, 0x0 disable init resp timer
0x00, // Byte 7 - IRT LSB, 0x0 disable init resp timer
};
U8 sat_changeable_mode_page_19[] =
{
SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT,
SCSI_MODE_PAGE_19_LENGTH-2,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
};
U8 sat_default_mode_page_1C[] =
{
SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL, // Byte 0 - Page Code,
// SPF(0), PS(0)
SCSI_MODE_PAGE_1C_LENGTH-2, // Byte 1 - Page Length
SCSI_MODE_PAGE_DEXCPT_ENABLE, // Byte 2 - Perf, EBF, EWasc,
// DExcpt(1), Test, LogErr
0x06, // Byte 3 -- MRIE (6 == values only available upon request)
0x00, // Byte 4 -- Interval Timer
0x00, // Byte 5
0x00, // Byte 6
0x00, // Byte 7
0x00, // Byte 8 -- Report Count
0x00, // Byte 9
0x00, // Byte 10
0x00, // Byte 11
};
U8 sat_changeable_mode_page_1C[] =
{
SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL,
SCSI_MODE_PAGE_1C_LENGTH-2,
SCSI_MODE_PAGE_DEXCPT_ENABLE,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
};
U8 sat_supported_mode_pages[] =
{
SCSI_MODE_PAGE_READ_WRITE_ERROR,
SCSI_MODE_PAGE_DISCONNECT_RECONNECT,
SCSI_MODE_PAGE_CACHING,
SCSI_MODE_PAGE_CONTROL,
SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL
};
U8 *sat_changeable_mode_pages[] =
{
sat_changeable_mode_page_01,
sat_changeable_mode_page_02,
sat_changeable_mode_page_08,
sat_changeable_mode_page_0A,
sat_changeable_mode_page_1C
};
U8 *sat_default_mode_pages[] =
{
sat_default_mode_page_01,
sat_default_mode_page_02,
sat_default_mode_page_08,
sat_default_mode_page_0A,
sat_default_mode_page_1C
};
U16 sat_mode_page_sizes[] =
{
sizeof(sat_default_mode_page_01),
sizeof(sat_default_mode_page_02),
sizeof(sat_default_mode_page_08),
sizeof(sat_default_mode_page_0A),
sizeof(sat_default_mode_page_1C)
};
U16 sati_mode_page_get_page_index(
U8 page_code
)
{
U16 index;
for (index = 0; index < SAT_SUPPORTED_MODE_PAGES_LENGTH; index++)
{
if (sat_supported_mode_pages[index] == page_code)
return index;
}
return SATI_MODE_PAGE_UNSUPPORTED_INDEX;
}
#endif // defined(ENABLE_SATI_MODE_PAGES)