| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/runfw/@/arm/xscale/ixp425/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/runfw/@/arm/xscale/ixp425/ixp425reg.h |
/* $NetBSD: ixp425reg.h,v 1.19 2005/12/11 12:16:51 christos Exp $ */ /* * Copyright (c) 2003 * Ichiro FUKUHARA <ichiro@ichiro.org>. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Ichiro FUKUHARA. * 4. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY ICHIRO FUKUHARA ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL ICHIRO FUKUHARA OR THE VOICES IN HIS HEAD BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/arm/xscale/ixp425/ixp425reg.h 214946 2010-11-07 20:33:39Z thompsa $ * */ #ifndef _IXP425REG_H_ #define _IXP425REG_H_ /* * Physical memory map for the Intel IXP425 */ /* * CC00 00FF --------------------------- * SDRAM Configuration Registers * CC00 0000 --------------------------- * * C800 BFFF --------------------------- * System and Peripheral Registers * C800 0000 --------------------------- * Expansion Bus Configuration Registers * C400 0000 --------------------------- * PCI Configuration and Status Registers * C000 0000 --------------------------- * * 6400 0000 --------------------------- * Queue manager * 6000 0000 --------------------------- * Expansion Bus Data * 5000 0000 --------------------------- * PCI Data * 4800 0000 --------------------------- * * 4000 0000 --------------------------- * SDRAM * 0000 0000 --------------------------- */ /* * Virtual memory map for the Intel IXP425/IXP435 integrated devices */ /* * FFFF FFFF --------------------------- * * Global cache clean area * FF00 0000 --------------------------- * * FE00 0000 --------------------------- * 16M CFI Flash (on ext bus) * FD00 0000 --------------------------- * * FC00 0000 --------------------------- * PCI Data (memory space) * F800 0000 --------------------------- IXP425_PCI_MEM_VBASE * * F020 1000 --------------------------- * SDRAM/DDR Memory Controller * F020 0000 --------------------------- IXP425_MCU_VBASE * * F001 F000 RS485 (Cambria) CAMBRIA_RS485_VBASE * F001 E000 GPS (Cambria) CAMBRIA_GPS_VBASE * F001 D000 EHCI USB 2 (IXP435) IXP435_USB2_VBASE * F001 C000 EHCI USB 1 (IXP435) IXP435_USB1_VBASE * Queue manager * F001 8000 --------------------------- IXP425_QMGR_VBASE * PCI Configuration and Status * F001 7000 --------------------------- IXP425_PCI_VBASE * * (NB: gap for future addition of EXP CS5-7) * F001 4000 Expansion Bus Chip Select 4 * F001 3000 Expansion Bus Chip Select 3 * F001 2000 Expansion Bus Chip Select 2 * F001 1000 Expansion Bus Chip Select 1 * Expansion Bus Configuration * F001 0000 --------------------------- IXP425_EXP_VBASE * * F000 C000 MAC-A (IXP435) * F000 B000 USB (option on IXP425) * F000 A000 MAC-B (IXP425) | MAC-C (IXP435) * F000 9000 MAC-A (IXP425) * F000 8000 NPE-C * F000 7000 NPE-B (IXP425) * F000 6000 NPE-A * F000 5000 Timers * F000 4000 GPIO Controller * F000 3000 Interrupt Controller * F000 2000 Performance Monitor Controller (PMC) * F000 1000 UART 1 (IXP425) * F000 0000 UART 0 * F000 0000 --------------------------- IXP425_IO_VBASE * * 0000 0000 --------------------------- * */ /* Physical/Virtual address for I/O space */ #define IXP425_IO_VBASE 0xf0000000UL #define IXP425_IO_HWBASE 0xc8000000UL #define IXP425_IO_SIZE 0x00010000UL /* Physical/Virtual addresss offsets */ #define IXP425_UART0_OFFSET 0x00000000UL #define IXP425_UART1_OFFSET 0x00001000UL #define IXP425_PMC_OFFSET 0x00002000UL #define IXP425_INTR_OFFSET 0x00003000UL #define IXP425_GPIO_OFFSET 0x00004000UL #define IXP425_TIMER_OFFSET 0x00005000UL #define IXP425_NPE_A_OFFSET 0x00006000UL /* Not User Programmable */ #define IXP425_NPE_B_OFFSET 0x00007000UL /* Not User Programmable */ #define IXP425_NPE_C_OFFSET 0x00008000UL /* Not User Programmable */ #define IXP425_MAC_B_OFFSET 0x00009000UL /* Ethernet MAC on NPE-B */ #define IXP425_MAC_C_OFFSET 0x0000a000UL /* Ethernet MAC on NPE-C */ #define IXP425_USB_OFFSET 0x0000b000UL #define IXP435_MAC_A_OFFSET 0x0000c000UL /* Ethernet MAC on NPE-A */ #define IXP425_REG_SIZE 0x1000 /* * UART * UART0 0xc8000000 * UART1 0xc8001000 * */ /* I/O space */ #define IXP425_UART0_HWBASE (IXP425_IO_HWBASE + IXP425_UART0_OFFSET) #define IXP425_UART1_HWBASE (IXP425_IO_HWBASE + IXP425_UART1_OFFSET) #define IXP425_UART0_VBASE (IXP425_IO_VBASE + IXP425_UART0_OFFSET) /* 0xf0000000 */ #define IXP425_UART1_VBASE (IXP425_IO_VBASE + IXP425_UART1_OFFSET) /* 0xf0001000 */ #define IXP425_UART_FREQ 14745600 #define IXP425_UART_IER 0x01 /* interrupt enable register */ #define IXP425_UART_IER_RTOIE 0x10 /* receiver timeout interrupt enable */ #define IXP425_UART_IER_UUE 0x40 /* UART Unit enable */ /*#define IXP4XX_COM_NPORTS 8*/ /* * Timers */ #define IXP425_TIMER_HWBASE (IXP425_IO_HWBASE + IXP425_TIMER_OFFSET) #define IXP425_TIMER_VBASE (IXP425_IO_VBASE + IXP425_TIMER_OFFSET) #define IXP425_OST_TS 0x0000 #define IXP425_OST_TIM0 0x0004 #define IXP425_OST_TIM1 0x000C #define IXP425_OST_TIM0_RELOAD 0x0008 #define IXP425_OST_TIM1_RELOAD 0x0010 #define TIMERRELOAD_MASK 0xFFFFFFFC #define OST_ONESHOT_EN (1U << 1) #define OST_TIMER_EN (1U << 0) #define IXP425_OST_STATUS 0x0020 #define OST_WARM_RESET (1U << 4) #define OST_WDOG_INT (1U << 3) #define OST_TS_INT (1U << 2) #define OST_TIM1_INT (1U << 1) #define OST_TIM0_INT (1U << 0) #define IXP425_OST_WDOG 0x0014 #define IXP425_OST_WDOG_ENAB 0x0018 #define IXP425_OST_WDOG_KEY 0x001c #define OST_WDOG_KEY_MAJICK 0x482e #define OST_WDOG_ENAB_RST_ENA (1u << 0) #define OST_WDOG_ENAB_INT_ENA (1u << 1) #define OST_WDOG_ENAB_CNT_ENA (1u << 2) /* * Interrupt Controller Unit. * PA 0xc8003000 */ #define IXP425_IRQ_HWBASE IXP425_IO_HWBASE + IXP425_INTR_OFFSET #define IXP425_IRQ_VBASE IXP425_IO_VBASE + IXP425_INTR_OFFSET /* 0xf0003000 */ #define IXP425_IRQ_SIZE 0x00000020UL #define IXP425_INT_STATUS (IXP425_IRQ_VBASE + 0x00) #define IXP425_INT_ENABLE (IXP425_IRQ_VBASE + 0x04) #define IXP425_INT_SELECT (IXP425_IRQ_VBASE + 0x08) #define IXP425_IRQ_STATUS (IXP425_IRQ_VBASE + 0x0C) #define IXP425_FIQ_STATUS (IXP425_IRQ_VBASE + 0x10) #define IXP425_INT_PRTY (IXP425_IRQ_VBASE + 0x14) #define IXP425_IRQ_ENC (IXP425_IRQ_VBASE + 0x18) #define IXP425_FIQ_ENC (IXP425_IRQ_VBASE + 0x1C) #define IXP425_INT_SW1 31 /* SW Interrupt 1 */ #define IXP425_INT_SW0 30 /* SW Interrupt 0 */ #define IXP425_INT_GPIO_12 29 /* GPIO 12 */ #define IXP425_INT_GPIO_11 28 /* GPIO 11 */ #define IXP425_INT_GPIO_10 27 /* GPIO 11 */ #define IXP425_INT_GPIO_9 26 /* GPIO 9 */ #define IXP425_INT_GPIO_8 25 /* GPIO 8 */ #define IXP425_INT_GPIO_7 24 /* GPIO 7 */ #define IXP425_INT_GPIO_6 23 /* GPIO 6 */ #define IXP425_INT_GPIO_5 22 /* GPIO 5 */ #define IXP425_INT_GPIO_4 21 /* GPIO 4 */ #define IXP425_INT_GPIO_3 20 /* GPIO 3 */ #define IXP425_INT_GPIO_2 19 /* GPIO 2 */ #define IXP425_INT_XSCALE_PMU 18 /* XScale PMU */ #define IXP425_INT_AHB_PMU 17 /* AHB PMU */ #define IXP425_INT_WDOG 16 /* Watchdog Timer */ #define IXP425_INT_UART0 15 /* HighSpeed UART */ #define IXP425_INT_STAMP 14 /* Timestamp Timer */ #define IXP425_INT_UART1 13 /* Console UART */ #define IXP425_INT_USB 12 /* USB */ #define IXP425_INT_TMR1 11 /* General-Purpose Timer1 */ #define IXP425_INT_PCIDMA2 10 /* PCI DMA Channel 2 */ #define IXP425_INT_PCIDMA1 9 /* PCI DMA Channel 1 */ #define IXP425_INT_PCIINT 8 /* PCI Interrupt */ #define IXP425_INT_GPIO_1 7 /* GPIO 1 */ #define IXP425_INT_GPIO_0 6 /* GPIO 0 */ #define IXP425_INT_TMR0 5 /* General-Purpose Timer0 */ #define IXP425_INT_QUE33_64 4 /* Queue Manager 33-64 */ #define IXP425_INT_QUE1_32 3 /* Queue Manager 1-32 */ #define IXP425_INT_NPE_C 2 /* NPE C */ #define IXP425_INT_NPE_B 1 /* NPE B */ #define IXP425_INT_NPE_A 0 /* NPE A */ /* NB: IXP435 has an additional 32 IRQ's */ #define IXP435_INT_STATUS2 (IXP425_IRQ_VBASE + 0x20) #define IXP435_INT_ENABLE2 (IXP425_IRQ_VBASE + 0x24) #define IXP435_INT_SELECT2 (IXP425_IRQ_VBASE + 0x28) #define IXP435_IRQ_STATUS2 (IXP425_IRQ_VBASE + 0x2C) #define IXP435_FIQ_STATUS2 (IXP425_IRQ_VBASE + 0x30) #define IXP435_INT_USB0 32 /* USB Host 2.0 Host 0 */ #define IXP435_INT_USB1 33 /* USB Host 2.0 Host 1 */ #define IXP435_INT_QMGR_PER 60 /* Queue manager parity error */ #define IXP435_INT_ECC 61 /* Single or multi-bit ECC error */ /* * software interrupt */ #define IXP425_INT_bit31 31 #define IXP425_INT_bit30 30 #define IXP425_INT_bit14 14 #define IXP425_INT_bit11 11 #define IXP425_INT_HWMASK (0xffffffff & \ ~((1 << IXP425_INT_bit31) | \ (1 << IXP425_INT_bit30) | \ (1 << IXP425_INT_bit14) | \ (1 << IXP425_INT_bit11))) #define IXP425_INT_GPIOMASK (0x3ff800c0u) #define IXP435_INT_HWMASK ((1 << (IXP435_INT_USB0 - 32)) | \ (1 << (IXP435_INT_USB1 - 32)) | \ (1 << (IXP435_INT_QMGR_PER - 32)) | \ (1 << (IXP435_INT_ECC - 32))) /* * GPIO */ #define IXP425_GPIO_HWBASE IXP425_IO_HWBASE + IXP425_GPIO_OFFSET #define IXP425_GPIO_VBASE IXP425_IO_VBASE + IXP425_GPIO_OFFSET /* 0xf0004000 */ #define IXP425_GPIO_SIZE 0x00000020UL #define IXP425_GPIO_GPOUTR 0x00 #define IXP425_GPIO_GPOER 0x04 #define IXP425_GPIO_GPINR 0x08 #define IXP425_GPIO_GPISR 0x0c #define IXP425_GPIO_GPIT1R 0x10 #define IXP425_GPIO_GPIT2R 0x14 #define IXP425_GPIO_GPCLKR 0x18 # define GPCLKR_MUX14 (1U << 8) # define GPCLKR_CLK0TC_SHIFT 4 # define GPCLKR_CLK0DC_SHIFT 0 /* GPIO Output */ #define GPOUT_ON 0x1 #define GPOUT_OFF 0x0 /* GPIO direction */ #define GPOER_INPUT 0x1 #define GPOER_OUTPUT 0x0 /* GPIO Type bits */ #define GPIO_TYPE_ACT_HIGH 0x0 #define GPIO_TYPE_ACT_LOW 0x1 #define GPIO_TYPE_EDG_RISING 0x2 #define GPIO_TYPE_EDG_FALLING 0x3 #define GPIO_TYPE_TRANSITIONAL 0x4 #define GPIO_TYPE_MASK 0x7 #define GPIO_TYPE(b,v) ((v) << (((b) & 0x7) * 3)) #define GPIO_TYPE_REG(b) (((b)&8)?IXP425_GPIO_GPIT2R:IXP425_GPIO_GPIT1R) #define IXP4XX_GPIO_PINS 16 /* * Expansion Bus Configuration Space. */ #define IXP425_EXP_HWBASE 0xc4000000UL #define IXP425_EXP_VBASE 0xf0010000UL #define IXP425_EXP_SIZE 0x1000 /* offset */ #define EXP_TIMING_CS0_OFFSET 0x0000 #define EXP_TIMING_CS1_OFFSET 0x0004 #define EXP_TIMING_CS2_OFFSET 0x0008 #define EXP_TIMING_CS3_OFFSET 0x000c #define EXP_TIMING_CS4_OFFSET 0x0010 #define EXP_TIMING_CS5_OFFSET 0x0014 #define EXP_TIMING_CS6_OFFSET 0x0018 #define EXP_TIMING_CS7_OFFSET 0x001c #define EXP_CNFG0_OFFSET 0x0020 #define EXP_CNFG1_OFFSET 0x0024 #define EXP_FCTRL_OFFSET 0x0028 #define IXP425_EXP_RECOVERY_SHIFT 16 #define IXP425_EXP_HOLD_SHIFT 20 #define IXP425_EXP_STROBE_SHIFT 22 #define IXP425_EXP_SETUP_SHIFT 26 #define IXP425_EXP_ADDR_SHIFT 28 #define IXP425_EXP_CS_EN (1U << 31) #define IXP425_EXP_RECOVERY_T(x) (((x) & 15) << IXP425_EXP_RECOVERY_SHIFT) #define IXP425_EXP_HOLD_T(x) (((x) & 3) << IXP425_EXP_HOLD_SHIFT) #define IXP425_EXP_STROBE_T(x) (((x) & 15) << IXP425_EXP_STROBE_SHIFT) #define IXP425_EXP_SETUP_T(x) (((x) & 3) << IXP425_EXP_SETUP_SHIFT) #define IXP425_EXP_ADDR_T(x) (((x) & 3) << IXP425_EXP_ADDR_SHIFT) /* EXP_CSn bits */ #define EXP_BYTE_EN 0x00000001 /* bus uses only 8-bit data */ #define EXP_WR_EN 0x00000002 /* ena writes to CS region */ /* bit 2 is reserved */ #define EXP_SPLT_EN 0x00000008 /* ena AHB split transfers */ #define EXP_MUX_EN 0x00000010 /* multiplexed address/data */ #define EXP_HRDY_POL 0x00000020 /* HPI|HRDY polarity */ #define EXP_BYTE_RD16 0x00000040 /* byte rd access to word dev */ #define EXP_CNFG 0x00003c00 /* device config size */ #define EXP_SZ_512 (0 << 10) #define EXP_SZ_1K (1 << 10) #define EXP_SZ_2K (2 << 10) #define EXP_SZ_4K (3 << 10) #define EXP_SZ_8K (4 << 10) #define EXP_SZ_16K (5 << 10) #define EXP_SZ_32K (6 << 10) #define EXP_SZ_64K (7 << 10) #define EXP_SZ_128K (8 << 10) #define EXP_SZ_256K (9 << 10) #define EXP_SZ_512K (10 << 10) #define EXP_SZ_1M (11 << 10) #define EXP_SZ_2M (12 << 10) #define EXP_SZ_4M (13 << 10) #define EXP_SZ_8M (14 << 10) #define EXP_SZ_16M (15 << 10) #define EXP_CYC_TYPE 0x0000c000 /* bus cycle "type" */ #define EXP_CYC_INTEL (0 << 14) #define EXP_CYC_MOTO (1 << 14) #define EXP_CYC_HPI (2 << 14) #define EXP_T5 0x000f0000 /* recovery timing */ #define EXP_T4 0x00300000 /* hold timing */ #define EXP_T3 0x03c00000 /* strobe timing */ #define EXP_T2 0x0c000000 /* setup/chip select timing */ #define EXP_T1 0x30000000 /* address timing */ /* bit 30 is reserved */ #define EXP_CS_EN 0x80000000 /* chip select enabled */ /* EXP_CNFG0 bits */ #define EXP_CNFG0_8BIT (1 << 0) #define EXP_CNFG0_PCI_HOST (1 << 1) #define EXP_CNFG0_PCI_ARB (1 << 2) #define EXP_CNFG0_PCI_66MHZ (1 << 4) #define EXP_CNFG0_MEM_MAP (1 << 31) /* EXP_CNFG1 bits */ #define EXP_CNFG1_SW_INT0 (1 << 0) #define EXP_CNFG1_SW_INT1 (1 << 1) #define EXP_FCTRL_RCOMP (1<<0) #define EXP_FCTRL_USB_DEVICE (1<<1) #define EXP_FCTRL_HASH (1<<2) #define EXP_FCTRL_AES (1<<3) #define EXP_FCTRL_DES (1<<4) #define EXP_FCTRL_HDLC (1<<5) #define EXP_FCTRL_AAL (1<<6) #define EXP_FCTRL_HSS (1<<7) #define EXP_FCTRL_UTOPIA (1<<8) #define EXP_FCTRL_ETH0 (1<<9) #define EXP_FCTRL_ETH1 (1<<10) #define EXP_FCTRL_NPEA (1<<11) /* reset */ #define EXP_FCTRL_NPEB (1<<12) /* reset */ #define EXP_FCTRL_NPEC (1<<13) /* reset */ #define EXP_FCTRL_PCI (1<<14) #define EXP_FCTRL_ECC_TIMESYNC (1<<15) #define EXP_FCTRL_UTOPIA_PHY (3<<16) /* PHY limit */ #define EXP_FCTRL_USB_HOST (1<<18) #define EXP_FCTRL_NPEA_ETH (1<<19) #define EXP_FCTRL_NPEB_ETH (1<<20) #define EXP_FCTRL_RSA (1<<21) #define EXP_FCTRL_MAXFREQ (3<<22) /* XScale frequency */ #define EXP_FCTRL_RESVD (0xff<<24) #define EXP_FCTRL_IXP46X_ONLY \ (EXP_FCTRL_ECC_TIMESYNC | EXP_FCTRL_USB_HOST | EXP_FCTRL_NPEA_ETH | \ EXP_FCTRL_NPEB_ETH | EXP_FCTRL_RSA | EXP_FCTRL_MAXFREQ) #define EXP_FCTRL_BITS \ "\20\1RCOMP\2USB\3HASH\4AES\5DES\6HDLC\7AAL\10HSS\11UTOPIA\12ETH0" \ "\13ETH1\17PCI\20ECC\23USB_HOST\24NPEA_ETH\25NPEB_ETH\26RSA" /* * PCI */ #define IXP425_PCI_HWBASE 0xc0000000 #define IXP425_PCI_VBASE 0xf0017000UL #define IXP425_PCI_SIZE 0x1000 #define IXP425_AHB_OFFSET 0x00000000UL /* AHB bus */ /* * Mapping registers of IXP425 PCI Configuration */ /* PCI_ID_REG 0x00 */ /* PCI_COMMAND_STATUS_REG 0x04 */ /* PCI_CLASS_REG 0x08 */ /* PCI_BHLC_REG 0x0c */ #define PCI_MAPREG_BAR0 0x10 /* Base Address 0 */ #define PCI_MAPREG_BAR1 0x14 /* Base Address 1 */ #define PCI_MAPREG_BAR2 0x18 /* Base Address 2 */ #define PCI_MAPREG_BAR3 0x1c /* Base Address 3 */ #define PCI_MAPREG_BAR4 0x20 /* Base Address 4 */ #define PCI_MAPREG_BAR5 0x24 /* Base Address 5 */ /* PCI_SUBSYS_ID_REG 0x2c */ /* PCI_INTERRUPT_REG 0x3c */ #define PCI_RTOTTO 0x40 /* PCI Controller CSR Base Address */ #define IXP425_PCI_CSR_BASE IXP425_PCI_VBASE /* PCI Memory Space */ #define IXP425_PCI_MEM_HWBASE 0x48000000UL #define IXP425_PCI_MEM_VBASE 0xf8000000UL #define IXP425_PCI_MEM_SIZE 0x04000000UL /* 64MB */ /* PCI I/O Space */ #define IXP425_PCI_IO_HWBASE 0x00000000UL #define IXP425_PCI_IO_SIZE 0x00100000UL /* 1Mbyte */ /* PCI Controller Configuration Offset */ #define PCI_NP_AD 0x00 #define PCI_NP_CBE 0x04 # define NP_CBE_SHIFT 4 #define PCI_NP_WDATA 0x08 #define PCI_NP_RDATA 0x0c #define PCI_CRP_AD_CBE 0x10 #define PCI_CRP_AD_WDATA 0x14 #define PCI_CRP_AD_RDATA 0x18 #define PCI_CSR 0x1c # define CSR_PRST (1U << 16) # define CSR_IC (1U << 15) # define CSR_ABE (1U << 4) # define CSR_PDS (1U << 3) # define CSR_ADS (1U << 2) # define CSR_HOST (1U << 0) #define PCI_ISR 0x20 # define ISR_AHBE (1U << 3) # define ISR_PPE (1U << 2) # define ISR_PFE (1U << 1) # define ISR_PSE (1U << 0) #define PCI_INTEN 0x24 #define PCI_DMACTRL 0x28 #define PCI_AHBMEMBASE 0x2c #define PCI_AHBIOBASE 0x30 #define PCI_PCIMEMBASE 0x34 #define PCI_AHBDOORBELL 0x38 #define PCI_PCIDOORBELL 0x3c #define PCI_ATPDMA0_AHBADDR 0x40 #define PCI_ATPDMA0_PCIADDR 0x44 #define PCI_ATPDMA0_LENGTH 0x48 #define PCI_ATPDMA1_AHBADDR 0x4c #define PCI_ATPDMA1_PCIADDR 0x50 #define PCI_ATPDMA1_LENGTH 0x54 #define PCI_PTADMA0_AHBADDR 0x58 #define PCI_PTADMA0_PCIADDR 0x5c #define PCI_PTADMA0_LENGTH 0x60 #define PCI_PTADMA1_AHBADDR 0x64 #define PCI_PTADMA1_PCIADDR 0x68 #define PCI_PTADMA1_LENGTH 0x6c /* PCI target(T)/initiator(I) Interface Commands for PCI_NP_CBE register */ #define COMMAND_NP_IA 0x0 /* Interrupt Acknowledge (I)*/ #define COMMAND_NP_SC 0x1 /* Special Cycle (I)*/ #define COMMAND_NP_IO_READ 0x2 /* I/O Read (T)(I) */ #define COMMAND_NP_IO_WRITE 0x3 /* I/O Write (T)(I) */ #define COMMAND_NP_MEM_READ 0x6 /* Memory Read (T)(I) */ #define COMMAND_NP_MEM_WRITE 0x7 /* Memory Write (T)(I) */ #define COMMAND_NP_CONF_READ 0xa /* Configuration Read (T)(I) */ #define COMMAND_NP_CONF_WRITE 0xb /* Configuration Write (T)(I) */ /* PCI byte enables */ #define BE_8BIT(a) ((0x10u << ((a) & 0x03)) ^ 0xf0) #define BE_16BIT(a) ((0x30u << ((a) & 0x02)) ^ 0xf0) #define BE_32BIT(a) 0x00 /* PCI byte selects */ #define READ_8BIT(v,a) ((u_int8_t)((v) >> (((a) & 3) * 8))) #define READ_16BIT(v,a) ((u_int16_t)((v) >> (((a) & 2) * 8))) #define WRITE_8BIT(v,a) (((u_int32_t)(v)) << (((a) & 3) * 8)) #define WRITE_16BIT(v,a) (((u_int32_t)(v)) << (((a) & 2) * 8)) /* PCI Controller Configuration Commands for PCI_CRP_AD_CBE */ #define COMMAND_CRP_READ 0x00 #define COMMAND_CRP_WRITE (1U << 16) /* * SDRAM Configuration Register */ #define IXP425_MCU_HWBASE 0xcc000000UL #define IXP425_MCU_VBASE 0xf0200000UL #define IXP425_MCU_SIZE 0x1000 /* Actually only 256 bytes */ #define MCU_SDR_CONFIG 0x00 #define MCU_SDR_CONFIG_MCONF(x) ((x) & 0x7) #define MCU_SDR_CONFIG_64MBIT (1u << 5) #define MCU_SDR_REFRESH 0x04 #define MCU_SDR_IR 0x08 /* * IXP435 DDR MCU Registers */ #define IXP435_MCU_HWBASE 0xcc00e500UL #define MCU_DDR_SDIR 0x00 /* DDR SDAM Initialization Reg*/ #define MCU_DDR_SDCR0 0x04 /* DDR SDRAM Control Reg 0 */ #define MCU_DDR_SDCR1 0x08 /* DDR SDRAM Control Reg 1 */ #define MCU_DDR_SDBR 0x0c /* SDRAM Base Register */ #define MCU_DDR_SBR0 0x10 /* SDRAM Boundary Register 0 */ #define MCU_DDR_SBR1 0x14 /* SDRAM Boundary Register 1 */ #define MCU_DDR_ECCR 0x1c /* ECC Control Register */ #define MCU_DDR_ELOG0 0x20 /* ECC Log Register 0 */ #define MCU_DDR_ELOG1 0x24 /* ECC Log Register 1 */ #define MCU_DDR_ECAR0 0x28 /* ECC Address Register 0 */ #define MCU_DDR_ECAR1 0x2c /* ECC Address Register 1 */ #define MCU_DDR_ECTST 0x30 /* ECC Test Register */ #define MCU_DDR_MCISR 0x34 /* MC Interrupt Status Reg */ #define MCU_DDR_MPTCR 0x3c /* MC Port Transaction Cnt Reg*/ #define MCU_DDR_RFR 0x48 /* Refresh Frequency Register */ #define MCU_DDR_SDPR(n) (0x50+(n)*4) /* SDRAM Page Register 0-7 */ /* NB: RCVDLY at 0x1050 and LEGOVERIDE at 0x1074 */ /* * Performance Monitoring Unit (CP14) * * CP14.0.1 Performance Monitor Control Register(PMNC) * CP14.1.1 Clock Counter(CCNT) * CP14.4.1 Interrupt Enable Register(INTEN) * CP14.5.1 Overflow Flag Register(FLAG) * CP14.8.1 Event Selection Register(EVTSEL) * CP14.0.2 Performance Counter Register 0(PMN0) * CP14.1.2 Performance Counter Register 0(PMN1) * CP14.2.2 Performance Counter Register 0(PMN2) * CP14.3.2 Performance Counter Register 0(PMN3) */ #define PMNC_E 0x00000001 /* enable all counters */ #define PMNC_P 0x00000002 /* reset all PMNs to 0 */ #define PMNC_C 0x00000004 /* clock counter reset */ #define PMNC_D 0x00000008 /* clock counter / 64 */ #define INTEN_CC_IE 0x00000001 /* enable clock counter interrupt */ #define INTEN_PMN0_IE 0x00000002 /* enable PMN0 interrupt */ #define INTEN_PMN1_IE 0x00000004 /* enable PMN1 interrupt */ #define INTEN_PMN2_IE 0x00000008 /* enable PMN2 interrupt */ #define INTEN_PMN3_IE 0x00000010 /* enable PMN3 interrupt */ #define FLAG_CC_IF 0x00000001 /* clock counter overflow */ #define FLAG_PMN0_IF 0x00000002 /* PMN0 overflow */ #define FLAG_PMN1_IF 0x00000004 /* PMN1 overflow */ #define FLAG_PMN2_IF 0x00000008 /* PMN2 overflow */ #define FLAG_PMN3_IF 0x00000010 /* PMN3 overflow */ #define EVTSEL_EVCNT_MASK 0x0000000ff /* event to count for PMNs */ #define PMNC_EVCNT0_SHIFT 0 #define PMNC_EVCNT1_SHIFT 8 #define PMNC_EVCNT2_SHIFT 16 #define PMNC_EVCNT3_SHIFT 24 /* * Queue Manager */ #define IXP425_QMGR_HWBASE 0x60000000UL #define IXP425_QMGR_VBASE 0xf0018000UL #define IXP425_QMGR_SIZE 0x4000 /* * Network Processing Engines (NPE's) and associated Ethernet MAC's. */ #define IXP425_NPE_A_HWBASE (IXP425_IO_HWBASE + IXP425_NPE_A_OFFSET) #define IXP425_NPE_A_VBASE (IXP425_IO_VBASE + IXP425_NPE_A_OFFSET) #define IXP425_NPE_A_SIZE 0x1000 /* Actually only 256 bytes */ #define IXP425_NPE_B_HWBASE (IXP425_IO_HWBASE + IXP425_NPE_B_OFFSET) #define IXP425_NPE_B_VBASE (IXP425_IO_VBASE + IXP425_NPE_B_OFFSET) #define IXP425_NPE_B_SIZE 0x1000 /* Actually only 256 bytes */ #define IXP425_NPE_C_HWBASE (IXP425_IO_HWBASE + IXP425_NPE_C_OFFSET) #define IXP425_NPE_C_VBASE (IXP425_IO_VBASE + IXP425_NPE_C_OFFSET) #define IXP425_NPE_C_SIZE 0x1000 /* Actually only 256 bytes */ #define IXP425_MAC_B_HWBASE (IXP425_IO_HWBASE + IXP425_MAC_B_OFFSET) #define IXP425_MAC_B_VBASE (IXP425_IO_VBASE + IXP425_MAC_B_OFFSET) #define IXP425_MAC_B_SIZE 0x1000 /* Actually only 256 bytes */ #define IXP425_MAC_C_HWBASE (IXP425_IO_HWBASE + IXP425_MAC_C_OFFSET) #define IXP425_MAC_C_VBASE (IXP425_IO_VBASE + IXP425_MAC_C_OFFSET) #define IXP425_MAC_C_SIZE 0x1000 /* Actually only 256 bytes */ #define IXP435_MAC_A_HWBASE (IXP425_IO_HWBASE + IXP435_MAC_A_OFFSET) #define IXP435_MAC_A_VBASE (IXP425_IO_VBASE + IXP435_MAC_A_OFFSET) #define IXP435_MAC_A_SIZE 0x1000 /* Actually only 256 bytes */ /* * Expansion Bus Data Space. */ #define IXP425_EXP_BUS_HWBASE 0x50000000UL #define IXP425_EXP_BUS_SIZE 0x01000000 /* max, typically smaller */ #define IXP425_EXP_BUS_CSx_HWBASE(i) \ (IXP425_EXP_BUS_HWBASE + (i)*IXP425_EXP_BUS_SIZE) #define IXP425_EXP_BUS_CSx_SIZE 0x1000 #define IXP425_EXP_BUS_CSx_VBASE(i) \ (0xF0011000UL + (((i)-1)*IXP425_EXP_BUS_CSx_SIZE)) /* NB: CS0 is special; it maps flash */ #define IXP425_EXP_BUS_CS0_HWBASE IXP425_EXP_BUS_CSx_HWBASE(0) #define IXP425_EXP_BUS_CS0_VBASE 0xFD000000UL #ifndef IXP4XX_FLASH_SIZE #define IXP425_EXP_BUS_CS0_SIZE 0x01000000 /* NB: 16M */ #else #define IXP425_EXP_BUS_CS0_SIZE IXP4XX_FLASH_SIZE #endif #define IXP425_EXP_BUS_CS1_HWBASE IXP425_EXP_BUS_CSx_HWBASE(1) #define IXP425_EXP_BUS_CS1_VBASE IXP425_EXP_BUS_CSx_VBASE(1) #define IXP425_EXP_BUS_CS1_SIZE IXP425_EXP_BUS_CSx_SIZE #define IXP425_EXP_BUS_CS2_HWBASE IXP425_EXP_BUS_CSx_HWBASE(2) #define IXP425_EXP_BUS_CS2_VBASE IXP425_EXP_BUS_CSx_VBASE(2) #define IXP425_EXP_BUS_CS2_SIZE IXP425_EXP_BUS_CSx_SIZE #define IXP425_EXP_BUS_CS3_HWBASE IXP425_EXP_BUS_CSx_HWBASE(3) #define IXP425_EXP_BUS_CS3_VBASE IXP425_EXP_BUS_CSx_VBASE(3) #define IXP425_EXP_BUS_CS3_SIZE IXP425_EXP_BUS_CSx_SIZE #define IXP425_EXP_BUS_CS4_HWBASE IXP425_EXP_BUS_CSx_HWBASE(4) #define IXP425_EXP_BUS_CS4_VBASE IXP425_EXP_BUS_CSx_VBASE(4) #define IXP425_EXP_BUS_CS4_SIZE IXP425_EXP_BUS_CSx_SIZE /* NB: not mapped (yet) */ #define IXP425_EXP_BUS_CS5_HWBASE IXP425_EXP_BUS_CSx_HWBASE(5) #define IXP425_EXP_BUS_CS6_HWBASE IXP425_EXP_BUS_CSx_HWBASE(6) #define IXP425_EXP_BUS_CS7_HWBASE IXP425_EXP_BUS_CSx_HWBASE(7) /* * IXP435/Gateworks Cambria */ #define IXP435_USB1_HWBASE 0xCD000000UL /* USB host controller 1 */ #define IXP435_USB1_VBASE 0xF001C000UL #define IXP435_USB1_SIZE 0x1000 /* NB: only uses 0x300 */ #define IXP435_USB2_HWBASE 0xCE000000UL /* USB host controller 2 */ #define IXP435_USB2_VBASE 0xF001D000UL #define IXP435_USB2_SIZE 0x1000 /* NB: only uses 0x300 */ #define CAMBRIA_GPS_HWBASE 0x53FC0000UL /* optional GPS Serial Port */ #define CAMBRIA_GPS_VBASE 0xF001E000UL #define CAMBRIA_GPS_SIZE 0x1000 #define CAMBRIA_RS485_HWBASE 0x53F80000UL /* optional RS485 Serial Port */ #define CAMBRIA_RS485_VBASE 0xF001F000UL #define CAMBRIA_RS485_SIZE 0x1000 /* NB: these are mapped on the fly, so no fixed virtual addresses */ #define CAMBRIA_OCTAL_LED_HWBASE 0x53F40000UL /* Octal Status LED Latch */ #define CAMBRIA_OCTAL_LED_SIZE 0x1000 #define CAMBRIA_CFSEL1_HWBASE 0x53E40000UL /* Compact Flash Socket Sel 0 */ #define CAMBRIA_CFSEL1_SIZE 0x40000 #define CAMBRIA_CFSEL0_HWBASE 0x53E00000UL /* Compact Flash Socket Sel 1 */ #define CAMBRIA_CFSEL0_SIZE 0x40000 #endif /* _IXP425REG_H_ */