| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/ispfw/isp_2200/@/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/ispfw/isp_2200/@/dev/isci/scil/scic_sds_controller.h |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/isci/scil/scic_sds_controller.h 231689 2012-02-14 15:58:49Z jimharris $
*/
#ifndef _SCIC_SDS_CONTROLLER_H_
#define _SCIC_SDS_CONTROLLER_H_
/**
* @file
*
* @brief This file contains the structures, constants and prototypes used for
* the core controller object.
*/
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
#include <dev/isci/scil/sci_pool.h>
#include <dev/isci/scil/sci_controller_constants.h>
#include <dev/isci/scil/sci_memory_descriptor_list.h>
#include <dev/isci/scil/sci_base_controller.h>
#include <dev/isci/scil/scic_config_parameters.h>
#include <dev/isci/scil/scic_sds_port.h>
#include <dev/isci/scil/scic_sds_phy.h>
#include <dev/isci/scil/scic_sds_remote_node_table.h>
#include <dev/isci/scil/scu_registers.h>
#include <dev/isci/scil/scu_constants.h>
#include <dev/isci/scil/scu_remote_node_context.h>
#include <dev/isci/scil/scu_task_context.h>
#include <dev/isci/scil/scu_unsolicited_frame.h>
#include <dev/isci/scil/scic_sds_unsolicited_frame_control.h>
#include <dev/isci/scil/scic_sds_port_configuration_agent.h>
#include <dev/isci/scil/scic_sds_pci.h>
struct SCIC_SDS_REMOTE_DEVICE;
struct SCIC_SDS_REQUEST;
#define SCU_COMPLETION_RAM_ALIGNMENT (64)
/**
* @enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS
*
* This enumeration depects the types of MDEs that are going to be created for
* the controller object.
*/
enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS
{
/**
* Completion queue MDE entry
*/
SCU_MDE_COMPLETION_QUEUE,
/**
* Remote node context MDE entry
*/
SCU_MDE_REMOTE_NODE_CONTEXT,
/**
* Task context MDE entry
*/
SCU_MDE_TASK_CONTEXT,
/**
* Unsolicited frame buffer MDE entrys this is the start of the unsolicited
* frame buffer entries.
*/
SCU_MDE_UF_BUFFER,
SCU_MAX_MDES
};
/**
* @struct SCIC_POWER_CONTROL
*
* This structure defines the fields for managing power control for direct
* attached disk devices.
*/
typedef struct SCIC_POWER_CONTROL
{
/**
* This field is set when the power control timer is running and cleared when
* it is not.
*/
BOOL timer_started;
/**
* This field is the handle to the driver timer object. This timer is used to
* control when the directed attached disks can consume power.
*/
void *timer;
/**
* This field is used to keep track of how many phys are put into the
* requesters field.
*/
U8 phys_waiting;
/**
* This field is used to keep track of how many remote devices have been granted to consume power
*/
U8 remote_devices_granted_power;
/**
* This field is an array of phys that we are waiting on. The phys are direct
* mapped into requesters via SCIC_SDS_PHY_T.phy_index
*/
SCIC_SDS_PHY_T *requesters[SCI_MAX_PHYS];
} SCIC_POWER_CONTROL_T;
/**
* @struct SCIC_SDS_CONTROLLER
*
* This structure represents the SCU contoller object.
*/
typedef struct SCIC_SDS_CONTROLLER
{
/**
* The SCI_BASE_CONTROLLER is the parent object for the SCIC_SDS_CONTROLLER
* object.
*/
SCI_BASE_CONTROLLER_T parent;
/**
* This field is the driver timer object handler used to time the controller
* object start and stop requests.
*/
void *timeout_timer;
/**
* This field is the current set of state handlers assigned to this controller
* object.
*/
struct SCIC_SDS_CONTROLLER_STATE_HANDLER *state_handlers;
/**
* This field contains the user parameters to be utilized for this
* core controller object.
*/
SCIC_USER_PARAMETERS_T user_parameters;
/**
* This field contains the OEM parameters version defining the structure
* layout. It comes from the version in the OEM block header.
*/
U8 oem_parameters_version;
/**
* This field contains the OEM parameters to be utilized for this
* core controller object.
*/
SCIC_OEM_PARAMETERS_T oem_parameters;
/**
* This field contains the port configuration agent for this controller.
*/
SCIC_SDS_PORT_CONFIGURATION_AGENT_T port_agent;
/**
* This field is the array of port objects that are controlled by this
* controller object. There is one dummy port object also contained within
* this controller object.
*/
struct SCIC_SDS_PORT port_table[SCI_MAX_PORTS + 1];
/**
* This field is the array of phy objects that are controlled by this
* controller object.
*/
struct SCIC_SDS_PHY phy_table[SCI_MAX_PHYS];
/**
* This field is the array of device objects that are currently constructed
* for this controller object. This table is used as a fast lookup of device
* objects that need to handle device completion notifications from the
* hardware. The table is RNi based.
*/
struct SCIC_SDS_REMOTE_DEVICE *device_table[SCI_MAX_REMOTE_DEVICES];
/**
* This field is the array of IO request objects that are currently active for
* this controller object. This table is used as a fast lookup of the io
* request object that need to handle completion queue notifications. The
* table is TCi based.
*/
struct SCIC_SDS_REQUEST *io_request_table[SCI_MAX_IO_REQUESTS];
/**
* This field is the free RNi data structure
*/
SCIC_REMOTE_NODE_TABLE_T available_remote_nodes;
/**
* This field is the TCi pool used to manage the task context index.
*/
SCI_POOL_CREATE(tci_pool, U16, SCI_MAX_IO_REQUESTS);
/**
* This filed is the SCIC_POWER_CONTROL data used to controll when direct
* attached devices can consume power.
*/
SCIC_POWER_CONTROL_T power_control;
/**
* This field is the array of sequence values for the IO Tag fields. Even
* though only 4 bits of the field is used for the sequence the sequence is 16
* bits in size so the sequence can be bitwise or'd with the TCi to build the
* IO Tag value.
*/
U16 io_request_sequence[SCI_MAX_IO_REQUESTS];
/**
* This field in the array of sequence values for the RNi. These are used
* to control io request build to io request start operations. The sequence
* value is recorded into an io request when it is built and is checked on
* the io request start operation to make sure that there was not a device
* hot plug between the build and start operation.
*/
U8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES];
/**
* This field is a pointer to the memory allocated by the driver for the task
* context table. This data is shared between the hardware and software.
*/
SCU_TASK_CONTEXT_T *task_context_table;
/**
* This field is a pointer to the memory allocated by the driver for the
* remote node context table. This table is shared between the hardware and
* software.
*/
SCU_REMOTE_NODE_CONTEXT_T *remote_node_context_table;
/**
* This field is the array of physical memory requiremets for this controller
* object.
*/
SCI_PHYSICAL_MEMORY_DESCRIPTOR_T memory_descriptors[SCU_MAX_MDES];
/**
* This field is a pointer to the completion queue. This memory is
* written to by the hardware and read by the software.
*/
U32 *completion_queue;
/**
* This field is the software copy of the completion queue get pointer. The
* controller object writes this value to the hardware after processing the
* completion entries.
*/
U32 completion_queue_get;
/**
* This field is the minimum of the number of hardware supported port entries
* and the software requested port entries.
*/
U32 logical_port_entries;
/**
* This field is the minimum number of hardware supported completion queue
* entries and the software requested completion queue entries.
*/
U32 completion_queue_entries;
/**
* This field is the minimum number of hardware supported event entries and
* the software requested event entries.
*/
U32 completion_event_entries;
/**
* This field is the minimum number of devices supported by the hardware and
* the number of devices requested by the software.
*/
U32 remote_node_entries;
/**
* This field is the minimum number of IO requests supported by the hardware
* and the number of IO requests requested by the software.
*/
U32 task_context_entries;
/**
* This object contains all of the unsolicited frame specific
* data utilized by the core controller.
*/
SCIC_SDS_UNSOLICITED_FRAME_CONTROL_T uf_control;
/**
* This field records the fact that the controller has encountered a fatal
* error and must be reset.
*/
BOOL encountered_fatal_error;
/**
* This field specifies that the controller should ignore
* completion processing for non-fastpath events. This will
* cause the completions to be thrown away.
*/
BOOL restrict_completions;
// Phy Startup Data
/**
* This field is the driver timer handle for controller phy request startup.
* On controller start the controller will start each PHY individually in
* order of phy index.
*/
void *phy_startup_timer;
/**
* This field is set when the phy_startup_timer is running and is cleared when
* the phy_startup_timer is stopped.
*/
BOOL phy_startup_timer_pending;
/**
* This field is the index of the next phy start. It is initialized to 0 and
* increments for each phy index that is started.
*/
U32 next_phy_to_start;
/**
* This field controlls the invalid link up notifications to the SCI_USER. If
* an invalid_link_up notification is reported a bit for the PHY index is set
* so further notifications are not made. Once the PHY object reports link up
* and is made part of a port then this bit for the PHY index is cleared.
*/
U8 invalid_phy_mask;
/**
* This is the controller index for this controller object.
*/
U8 controller_index;
/**
* This field is the PCI revision code for the controller object.
*/
enum SCU_CONTROLLER_PCI_REVISION_CODE pci_revision;
/*
* This field saves the current interrupt coalescing number of the controller.
*/
U16 interrupt_coalesce_number;
/*
* This field saves the current interrupt coalescing timeout value in microseconds.
*/
U32 interrupt_coalesce_timeout;
// Hardware memory mapped register space
#ifdef ARLINGTON_BUILD
/**
* This field is a pointer to the memory mapped register space for the
* LEX_REGISTERS.
*/
LEX_REGISTERS_T *lex_registers;
#endif
/**
* This field is a pointer to the memory mapped register space for the
* SMU_REGISTERS.
*/
SMU_REGISTERS_T *smu_registers;
/**
* This field is a pointer to the memory mapped register space for the
* SCU_REGISTERS.
*/
SCU_REGISTERS_T *scu_registers;
} SCIC_SDS_CONTROLLER_T;
typedef void (*SCIC_SDS_CONTROLLER_PHY_HANDLER_T)(
struct SCIC_SDS_CONTROLLER *controller,
struct SCIC_SDS_PORT *port,
struct SCIC_SDS_PHY *phy
);
typedef void (*SCIC_SDS_CONTROLLER_DEVICE_HANDLER_T)(
struct SCIC_SDS_CONTROLLER * controller,
struct SCIC_SDS_REMOTE_DEVICE * device
);
/**
* @struct SCIC_SDS_CONTROLLER_STATE_HANDLER
*
* This structure contains the SDS core specific definition for the state
* handlers.
*/
typedef struct SCIC_SDS_CONTROLLER_STATE_HANDLER
{
SCI_BASE_CONTROLLER_STATE_HANDLER_T parent;
SCI_BASE_CONTROLLER_REQUEST_HANDLER_T terminate_request_handler;
SCIC_SDS_CONTROLLER_PHY_HANDLER_T link_up_handler;
SCIC_SDS_CONTROLLER_PHY_HANDLER_T link_down_handler;
SCIC_SDS_CONTROLLER_DEVICE_HANDLER_T remote_device_started_handler;
SCIC_SDS_CONTROLLER_DEVICE_HANDLER_T remote_device_stopped_handler;
} SCIC_SDS_CONTROLLER_STATE_HANDLER_T;
extern SCIC_SDS_CONTROLLER_STATE_HANDLER_T
scic_sds_controller_state_handler_table[];
extern SCI_BASE_STATE_T scic_sds_controller_state_table[];
/**
* This macro will increment the specified index to and if the index wraps
* to 0 it will toggel the cycle bit.
*/
#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \
{ \
if ((index) + 1 == entry_count) \
{ \
(index) = 0; \
(cycle) = (cycle) ^ (bit_toggle); \
} \
else \
{ \
index = index + 1; \
} \
}
/**
* This is a helper macro that sets the state handlers for the controller
* object
*/
#define scic_sds_controller_set_state_handlers(this_controller, handlers) \
((this_controller)->state_handlers = (handlers))
/**
* This is a helper macro that gets the base state machine for the
* controller object
*/
#define scic_sds_controller_get_base_state_machine(this_contoroller) \
(&(this_controller)->parent.state_machine)
/**
* This is a helper macro to get the port configuration agent from the
* controller object.
*/
#define scic_sds_controller_get_port_configuration_agent(controller) \
(&(controller)->port_agent)
/**
* This is a helper macro that sets the base state machine state handlers
* based on the state id
*/
#define scic_sds_controller_set_base_state_handlers(this_controller, state_id) \
scic_sds_controller_set_state_handlers( \
this_controller, &scic_sds_controller_state_handler_table[(state_id)])
/**
* This macro writes to the smu_register for this controller
*/
#define smu_register_write(controller, reg, value) \
scic_sds_pci_write_smu_dword((controller), &(reg), (value))
/**
* This macro reads the smu_register for this controller
*/
#define smu_register_read(controller, reg) \
scic_sds_pci_read_smu_dword((controller), &(reg))
/**
* This mcaro writes the scu_register for this controller
*/
#define scu_register_write(controller, reg, value) \
scic_sds_pci_write_scu_dword((controller), &(reg), (value))
/**
* This macro reads the scu_register for this controller
*/
#define scu_register_read(controller, reg) \
scic_sds_pci_read_scu_dword((controller), &(reg))
#ifdef ARLINGTON_BUILD
/**
* This macro writes to the lex_register for this controller.
*/
#define lex_register_write(controller, reg, value) \
scic_cb_pci_write_dword((controller), (reg), (value))
/**
* This macro reads from the lex_register for this controller.
*/
#define lex_register_read(controller, reg) \
scic_cb_pci_read_dword((controller), (reg))
#endif // ARLINGTON_BUILD
/**
* This macro returns the protocol engine group for this controller object.
* Presently we only support protocol engine group 0 so just return that
*/
#define scic_sds_controller_get_protocol_engine_group(controller) 0
/**
* This macro constructs an IO tag from the sequence and index values.
*/
#define scic_sds_io_tag_construct(sequence, task_index) \
((sequence) << 12 | (task_index))
/**
* This macro returns the IO sequence from the IO tag value.
*/
#define scic_sds_io_tag_get_sequence(io_tag) \
(((io_tag) & 0xF000) >> 12)
/**
* This macro returns the TCi from the io tag value
*/
#define scic_sds_io_tag_get_index(io_tag) \
((io_tag) & 0x0FFF)
/**
* This is a helper macro to increment the io sequence count.
*
* We may find in the future that it will be faster to store the sequence
* count in such a way as we dont perform the shift operation to build io
* tag values so therefore need a way to incrment them correctly
*/
#define scic_sds_io_sequence_increment(value) \
((value) = (((value) + 1) & 0x000F))
#define scic_sds_remote_device_node_count(device) \
( \
( \
(device)->target_protocols.u.bits.attached_stp_target \
&& ((device)->is_direct_attached != TRUE) \
) \
? SCU_STP_REMOTE_NODE_COUNT : SCU_SSP_REMOTE_NODE_COUNT \
)
/**
* This macro will set the bit in the invalid phy mask for this controller
* object. This is used to control messages reported for invalid link up
* notifications.
*/
#define scic_sds_controller_set_invalid_phy(controller, phy) \
((controller)->invalid_phy_mask |= (1 << (phy)->phy_index))
/**
* This macro will clear the bit in the invalid phy mask for this controller
* object. This is used to control messages reported for invalid link up
* notifications.
*/
#define scic_sds_controller_clear_invalid_phy(controller, phy) \
((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
// ---------------------------------------------------------------------------
U32 scic_sds_controller_get_object_size(void);
// ---------------------------------------------------------------------------
U32 scic_sds_controller_get_min_timer_count(void);
U32 scic_sds_controller_get_max_timer_count(void);
// ---------------------------------------------------------------------------
void scic_sds_controller_post_request(
SCIC_SDS_CONTROLLER_T *this_controller,
U32 request
);
// ---------------------------------------------------------------------------
void scic_sds_controller_release_frame(
SCIC_SDS_CONTROLLER_T *this_controller,
U32 frame_index
);
void scic_sds_controller_copy_sata_response(
void * response_buffer,
void * frame_header,
void * frame_buffer
);
// ---------------------------------------------------------------------------
SCI_STATUS scic_sds_controller_allocate_remote_node_context(
SCIC_SDS_CONTROLLER_T *this_controller,
struct SCIC_SDS_REMOTE_DEVICE *the_device,
U16 *node_id
);
void scic_sds_controller_free_remote_node_context(
SCIC_SDS_CONTROLLER_T *this_controller,
struct SCIC_SDS_REMOTE_DEVICE *the_device,
U16 node_id
);
SCU_REMOTE_NODE_CONTEXT_T *scic_sds_controller_get_remote_node_context_buffer(
SCIC_SDS_CONTROLLER_T *this_controller,
U16 node_id
);
// ---------------------------------------------------------------------------
struct SCIC_SDS_REQUEST *scic_sds_controller_get_io_request_from_tag(
SCIC_SDS_CONTROLLER_T *this_controller,
U16 io_tag
);
U16 scic_sds_controller_get_io_sequence_from_tag(
SCIC_SDS_CONTROLLER_T *this_controller,
U16 io_tag
);
SCU_TASK_CONTEXT_T *scic_sds_controller_get_task_context_buffer(
SCIC_SDS_CONTROLLER_T *this_controller,
U16 io_tag
);
//-----------------------------------------------------------------------------
SCI_STATUS scic_sds_terminate_reqests(
SCIC_SDS_CONTROLLER_T *this_controller,
struct SCIC_SDS_REMOTE_DEVICE *this_remote_device,
struct SCIC_SDS_PORT *this_port
);
//*****************************************************************************
//* CORE CONTROLLER POWER CONTROL METHODS
//*****************************************************************************
void scic_sds_controller_power_control_timer_handler(
void *controller
);
void scic_sds_controller_power_control_queue_insert(
SCIC_SDS_CONTROLLER_T *this_controller,
struct SCIC_SDS_PHY *the_phy
);
void scic_sds_controller_power_control_queue_remove(
SCIC_SDS_CONTROLLER_T *this_controller,
struct SCIC_SDS_PHY *the_phy
);
//*****************************************************************************
//* CORE CONTROLLER PHY MESSAGE PROCESSING
//*****************************************************************************
void scic_sds_controller_link_up(
SCIC_SDS_CONTROLLER_T *this_controller,
struct SCIC_SDS_PORT *the_port,
struct SCIC_SDS_PHY *the_phy
);
void scic_sds_controller_link_down(
SCIC_SDS_CONTROLLER_T *this_controller,
struct SCIC_SDS_PORT *the_port,
struct SCIC_SDS_PHY *the_phy
);
//*****************************************************************************
//* CORE CONTROLLER PORT AGENT MESSAGE PROCESSING
//*****************************************************************************
void scic_sds_controller_port_agent_configured_ports(
SCIC_SDS_CONTROLLER_T * this_controller
);
//*****************************************************************************
//* CORE CONTROLLER REMOTE DEVICE MESSAGE PROCESSING
//*****************************************************************************
BOOL scic_sds_controller_has_remote_devices_stopping(
SCIC_SDS_CONTROLLER_T * this_controller
);
void scic_sds_controller_remote_device_started(
SCIC_SDS_CONTROLLER_T * this_controller,
struct SCIC_SDS_REMOTE_DEVICE * the_device
);
void scic_sds_controller_remote_device_stopped(
SCIC_SDS_CONTROLLER_T * this_controller,
struct SCIC_SDS_REMOTE_DEVICE * the_device
);
//*****************************************************************************
//* CORE CONTROLLER PRIVATE METHODS
//*****************************************************************************
#ifdef SCI_LOGGING
void scic_sds_controller_initialize_state_logging(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_deinitialize_state_logging(
SCIC_SDS_CONTROLLER_T *this_controller
);
#else
#define scic_sds_controller_initialize_state_logging(x)
#define scic_sds_controller_deinitialize_state_logging(x)
#endif
SCI_STATUS scic_sds_controller_validate_memory_descriptor_table(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_ram_initialization(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_assign_task_entries(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_afe_initialization(
SCIC_SDS_CONTROLLER_T * this_controller
);
void scic_sds_controller_enable_port_task_scheduler(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_initialize_completion_queue(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_initialize_unsolicited_frame_queue(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_phy_timer_stop(
SCIC_SDS_CONTROLLER_T *this_controller
);
BOOL scic_sds_controller_is_start_complete(
SCIC_SDS_CONTROLLER_T *this_controller
);
SCI_STATUS scic_sds_controller_start_next_phy(
SCIC_SDS_CONTROLLER_T *this_controller
);
SCI_STATUS scic_sds_controller_stop_phys(
SCIC_SDS_CONTROLLER_T *this_controller
);
SCI_STATUS scic_sds_controller_stop_ports(
SCIC_SDS_CONTROLLER_T *this_controller
);
SCI_STATUS scic_sds_controller_stop_devices(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_copy_task_context(
SCIC_SDS_CONTROLLER_T *this_controller,
struct SCIC_SDS_REQUEST *this_request
);
void scic_sds_controller_timeout_handler(
SCI_CONTROLLER_HANDLE_T controller
);
void scic_sds_controller_initialize_power_control(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_register_setup(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_reset_hardware(
SCIC_SDS_CONTROLLER_T * this_controller
);
#ifdef ARLINGTON_BUILD
void scic_sds_controller_lex_atux_initialization(
SCIC_SDS_CONTROLLER_T *this_controller
);
void scic_sds_controller_enable_chipwatch(
SCIC_SDS_CONTROLLER_T *this_controller
);
#endif // ARLINGTON_BUILD
void scic_sds_controller_build_memory_descriptor_table(
SCIC_SDS_CONTROLLER_T *this_controller
);
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // _SCIC_SDS_CONTROLLER_H_