| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/nmdm/@/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/nmdm/@/dev/isci/scil/scic_sds_stp_request.c |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/scic_sds_stp_request.c 231689 2012-02-14 15:58:49Z jimharris $");
#include <dev/isci/scil/intel_sat.h>
#include <dev/isci/scil/intel_sata.h>
#include <dev/isci/scil/sci_types.h>
#include <dev/isci/scil/scic_remote_device.h>
#include <dev/isci/scil/scic_user_callback.h>
#include <dev/isci/scil/scic_sds_controller.h>
#include <dev/isci/scil/scic_sds_remote_device.h>
#include <dev/isci/scil/scic_sds_stp_request.h>
#include <dev/isci/scil/scic_sds_stp_pio_request.h>
#include <dev/isci/scil/scic_sds_logger.h>
#include <dev/isci/sci_environment.h>
#include <dev/isci/scil/sci_base_state_machine.h>
#include <dev/isci/scil/scu_task_context.h>
#include <dev/isci/scil/intel_ata.h>
#include <dev/isci/scil/sci_util.h>
#include <dev/isci/scil/scic_sds_logger.h>
#include <dev/isci/scil/scic_sds_request.h>
#include <dev/isci/scil/scic_sds_stp_request.h>
#include <dev/isci/scil/scu_completion_codes.h>
#include <dev/isci/scil/scu_event_codes.h>
#include <dev/isci/scil/sci_base_state.h>
#include <dev/isci/scil/scic_sds_unsolicited_frame_control.h>
#include <dev/isci/scil/scic_io_request.h>
#if !defined(DISABLE_ATAPI)
#include <dev/isci/scil/scic_sds_stp_packet_request.h>
#endif
/**
* This macro returns the address of the stp h2d reg fis buffer in the io
* request memory
*/
#define scic_sds_stp_request_get_h2d_reg_buffer_unaligned(memory) \
((SATA_FIS_REG_H2D_T *)( \
((char *)(memory)) + sizeof(SCIC_SDS_STP_REQUEST_T) \
))
/**
* This macro aligns the stp command buffer in DWORD alignment
*/
#define scic_sds_stp_request_align_h2d_reg_buffer(address) \
((SATA_FIS_REG_H2D_T *)( \
(((POINTER_UINT)(address)) + (sizeof(U32) - 1)) \
& ~(sizeof(U32)- 1) \
))
/**
* This macro returns the DWORD-aligned stp command buffer
*/
#define scic_sds_stp_request_get_h2d_reg_buffer(memory) \
((SATA_FIS_REG_H2D_T *) \
((char *)scic_sds_stp_request_align_h2d_reg_buffer( \
(char *) scic_sds_stp_request_get_h2d_reg_buffer_unaligned(memory) \
)))
/**
* This macro returns the address of the stp response buffer in the io
* request memory
*/
#define scic_sds_stp_request_get_response_buffer_unaligned(memory) \
((SATA_FIS_REG_D2H_T *)( \
((char *)(scic_sds_stp_request_get_h2d_reg_buffer(memory))) \
+ sizeof(SATA_FIS_REG_H2D_T) \
))
/**
* This macro aligns the stp response buffer in DWORD alignment
*/
#define scic_sds_stp_request_align_response_buffer(address) \
((SATA_FIS_REG_D2H_T *)( \
(((POINTER_UINT)(address)) + (sizeof(U32) - 1)) \
& ~(sizeof(U32)- 1) \
))
/**
* This macro returns the DWORD-aligned stp response buffer
*/
#define scic_sds_stp_request_get_response_buffer(memory) \
((SATA_FIS_REG_D2H_T *) \
((char *)scic_sds_stp_request_align_response_buffer( \
(char *)scic_sds_stp_request_get_response_buffer_unaligned(memory) \
)))
/**
* This macro returns the address of the task context buffer in the io
* request memory
*/
#define scic_sds_stp_request_get_task_context_buffer_unaligned(memory) \
((SCU_TASK_CONTEXT_T *)( \
((char *)(scic_sds_stp_request_get_response_buffer(memory))) \
+ sizeof(SCI_SSP_RESPONSE_IU_T) \
))
/**
* This macro returns the aligned task context buffer
*/
#define scic_sds_stp_request_get_task_context_buffer(memory) \
((SCU_TASK_CONTEXT_T *)( \
((char *)scic_sds_request_align_task_context_buffer( \
(char *)scic_sds_stp_request_get_task_context_buffer_unaligned(memory)) \
)))
/**
* This macro returns the address of the sgl elment pairs in the io request
* memory buffer
*/
#define scic_sds_stp_request_get_sgl_element_buffer(memory) \
((SCU_SGL_ELEMENT_PAIR_T *)( \
((char *)(scic_sds_stp_request_get_task_context_buffer(memory))) \
+ sizeof(SCU_TASK_CONTEXT_T) \
))
/**
* This method return the memory space commonly required for STP IO and
* task requests.
*
* @return U32
*/
static
U32 scic_sds_stp_common_request_get_object_size(void)
{
return sizeof(SCIC_SDS_STP_REQUEST_T)
+ sizeof(SATA_FIS_REG_H2D_T)
+ sizeof(U32)
+ sizeof(SATA_FIS_REG_D2H_T)
+ sizeof(U32)
+ sizeof(SCU_TASK_CONTEXT_T)
+ CACHE_LINE_SIZE;
}
/**
* This method return the memory space required for STP PIO requests.
*
* @return U32
*/
U32 scic_sds_stp_request_get_object_size(void)
{
return scic_sds_stp_common_request_get_object_size()
+ sizeof(SCU_SGL_ELEMENT_PAIR_T) * SCU_MAX_SGL_ELEMENT_PAIRS;
}
/**
* This method return the memory space required for STP task requests.
*
* @return U32
*/
U32 scic_sds_stp_task_request_get_object_size(void)
{
return scic_sds_stp_common_request_get_object_size();
}
/**
*
*
* @param[in] this_request
*/
void scic_sds_stp_request_assign_buffers(
SCIC_SDS_REQUEST_T * request
)
{
SCIC_SDS_STP_REQUEST_T * this_request = (SCIC_SDS_STP_REQUEST_T *)request;
this_request->parent.command_buffer =
scic_sds_stp_request_get_h2d_reg_buffer(this_request);
this_request->parent.response_buffer =
scic_sds_stp_request_get_response_buffer(this_request);
this_request->parent.sgl_element_pair_buffer =
scic_sds_stp_request_get_sgl_element_buffer(this_request);
this_request->parent.sgl_element_pair_buffer =
scic_sds_request_align_sgl_element_buffer(this_request->parent.sgl_element_pair_buffer);
if (this_request->parent.was_tag_assigned_by_user == FALSE)
{
this_request->parent.task_context_buffer =
scic_sds_stp_request_get_task_context_buffer(this_request);
}
}
/**
* @brief This method is will fill in the SCU Task Context for any type of
* SATA request. This is called from the various SATA constructors.
*
* @pre The general io request construction is complete.
* @pre The buffer assignment for the command buffer is complete.
*
* @param[in] this_request The general IO request object which is to be used
* in constructing the SCU task context.
* @param[in] task_context The buffer pointer for the SCU task context which
* is being constructed.
*
* @return none
*
* @todo Revisit task context construction to determine what is common for
* SSP/SMP/STP task context structures.
*/
void scu_sata_reqeust_construct_task_context(
SCIC_SDS_REQUEST_T * this_request,
SCU_TASK_CONTEXT_T * task_context
)
{
SCI_PHYSICAL_ADDRESS physical_address;
SCIC_SDS_CONTROLLER_T *owning_controller;
SCIC_SDS_REMOTE_DEVICE_T *target_device;
SCIC_SDS_PORT_T *target_port;
owning_controller = scic_sds_request_get_controller(this_request);
target_device = scic_sds_request_get_device(this_request);
target_port = scic_sds_request_get_port(this_request);
// Fill in the TC with the its required data
task_context->abort = 0;
task_context->priority = SCU_TASK_PRIORITY_NORMAL;
task_context->initiator_request = 1;
task_context->connection_rate =
scic_remote_device_get_connection_rate(target_device);
task_context->protocol_engine_index =
scic_sds_controller_get_protocol_engine_group(owning_controller);
task_context->logical_port_index =
scic_sds_port_get_index(target_port);
task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP;
task_context->valid = SCU_TASK_CONTEXT_VALID;
task_context->context_type = SCU_TASK_CONTEXT_TYPE;
task_context->remote_node_index =
scic_sds_remote_device_get_index(this_request->target_device);
task_context->command_code = 0;
task_context->link_layer_control = 0;
task_context->do_not_dma_ssp_good_response = 1;
task_context->strict_ordering = 0;
task_context->control_frame = 0;
task_context->timeout_enable = 0;
task_context->block_guard_enable = 0;
task_context->address_modifier = 0;
task_context->task_phase = 0x01;
task_context->ssp_command_iu_length =
(sizeof(SATA_FIS_REG_H2D_T) - sizeof(U32)) / sizeof(U32);
// Set the first word of the H2D REG FIS
task_context->type.words[0] = *(U32 *)this_request->command_buffer;
if (this_request->was_tag_assigned_by_user)
{
// Build the task context now since we have already read the data
this_request->post_context = (
SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC
| (
scic_sds_controller_get_protocol_engine_group(owning_controller)
<< SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT
)
| (
scic_sds_port_get_index(target_port)
<< SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT
)
| scic_sds_io_tag_get_index(this_request->io_tag)
);
}
else
{
// Build the task context now since we have already read the data
this_request->post_context = (
SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC
| (
scic_sds_controller_get_protocol_engine_group(owning_controller)
<< SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT
)
| (
scic_sds_port_get_index(target_port)
<< SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT
)
// This is not assigned because we have to wait until we get a TCi
);
}
// Copy the physical address for the command buffer to the SCU Task Context
// We must offset the command buffer by 4 bytes because the first 4 bytes are
// transfered in the body of the TC
scic_cb_io_request_get_physical_address(
scic_sds_request_get_controller(this_request),
this_request,
((char *)this_request->command_buffer) + sizeof(U32),
&physical_address
);
task_context->command_iu_upper =
sci_cb_physical_address_upper(physical_address);
task_context->command_iu_lower =
sci_cb_physical_address_lower(physical_address);
// SATA Requests do not have a response buffer
task_context->response_iu_upper = 0;
task_context->response_iu_lower = 0;
}
/**
* This method will perform any general sata request construction.
*
* @todo What part of SATA IO request construction is general?
*
* @param[in] this_request
*
* @return none
*/
void scic_sds_stp_non_ncq_request_construct(
SCIC_SDS_REQUEST_T * this_request
)
{
this_request->has_started_substate_machine = TRUE;
}
/**
* This method will perform request construction common to all types of
* STP requests that are optimized by the silicon (i.e. UDMA, NCQ).
*
* @param[in,out] this_request This parameter specifies the request to be
* constructed as an optimized request.
* @param[in] optimized_task_type This parameter specifies whether the
* request is to be an UDMA request or a NCQ request.
* - A value of 0 indicates UDMA.
* - A value of 1 indicates NCQ.
*
* @return This method returns an indication as to whether the construction
* was successful.
*/
static
void scic_sds_stp_optimized_request_construct(
SCIC_SDS_REQUEST_T * this_request,
U8 optimized_task_type,
U32 transfer_length,
SCI_IO_REQUEST_DATA_DIRECTION data_direction
)
{
SCU_TASK_CONTEXT_T * task_context = this_request->task_context_buffer;
// Build the STP task context structure
scu_sata_reqeust_construct_task_context(this_request, task_context);
// Copy over the number of bytes to be transfered
task_context->transfer_length_bytes = transfer_length;
if ( data_direction == SCI_IO_REQUEST_DATA_OUT )
{
// The difference between the DMA IN and DMA OUT request task type
// values are consistent with the difference between FPDMA READ
// and FPDMA WRITE values. Add the supplied task type parameter
// to this difference to set the task type properly for this
// DATA OUT (WRITE) case.
task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT
- SCU_TASK_TYPE_DMA_IN);
}
else
{
// For the DATA IN (READ) case, simply save the supplied
// optimized task type.
task_context->task_type = optimized_task_type;
}
}
/**
* This method performs the operations common to all SATA/STP requests
* utilizing the raw frame method.
*
* @param[in] this_request This parameter specifies the STP request object
* for which to construct a RAW command frame task context.
* @param[in] task_context This parameter specifies the SCU specific
* task context buffer to construct.
*
* @return none
*/
void scu_stp_raw_request_construct_task_context(
SCIC_SDS_STP_REQUEST_T * this_request,
SCU_TASK_CONTEXT_T * task_context
)
{
scu_sata_reqeust_construct_task_context(&this_request->parent, task_context);
task_context->control_frame = 0;
task_context->priority = SCU_TASK_PRIORITY_NORMAL;
task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME;
task_context->type.stp.fis_type = SATA_FIS_TYPE_REGH2D;
task_context->transfer_length_bytes = sizeof(SATA_FIS_REG_H2D_T) - sizeof(U32);
}
/**
* This method will construct the STP Non-data request and its associated
* TC data. A non-data request essentially behaves like a 0 length read
* request in the SCU.
*
* @param[in] this_request This parameter specifies the core request
* object to construction into an STP/SATA non-data request.
*
* @return This method currently always returns SCI_SUCCESS
*/
SCI_STATUS scic_sds_stp_non_data_request_construct(
SCIC_SDS_REQUEST_T * this_request
)
{
scic_sds_stp_non_ncq_request_construct(this_request);
// Build the STP task context structure
scu_stp_raw_request_construct_task_context(
(SCIC_SDS_STP_REQUEST_T*) this_request,
this_request->task_context_buffer
);
sci_base_state_machine_construct(
&this_request->started_substate_machine,
&this_request->parent.parent,
scic_sds_stp_request_started_non_data_substate_table,
SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE
);
return SCI_SUCCESS;
}
SCI_STATUS scic_sds_stp_soft_reset_request_construct(
SCIC_SDS_REQUEST_T * this_request
)
{
scic_sds_stp_non_ncq_request_construct(this_request);
// Build the STP task context structure
scu_stp_raw_request_construct_task_context(
(SCIC_SDS_STP_REQUEST_T*) this_request,
this_request->task_context_buffer
);
sci_base_state_machine_construct(
&this_request->started_substate_machine,
&this_request->parent.parent,
scic_sds_stp_request_started_soft_reset_substate_table,
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE
);
return SCI_SUCCESS;
}
/**
* @brief This method constructs the SATA request object.
*
* @param[in] this_request
* @param[in] sat_protocol
* @param[in] transfer_length
* @param[in] data_direction
* @param[in] copy_rx_frame
* @param[in] do_translate_sgl This parameter specifies whether SGL
* translation should be performed or if the user is handling
* it.
*
* @return SCI_STATUS
*/
SCI_STATUS scic_sds_io_request_construct_sata(
SCIC_SDS_REQUEST_T * this_request,
U8 sat_protocol,
U32 transfer_length,
SCI_IO_REQUEST_DATA_DIRECTION data_direction,
BOOL copy_rx_frame,
BOOL do_translate_sgl
)
{
SCI_STATUS status = SCI_SUCCESS;
this_request->protocol = SCIC_STP_PROTOCOL;
this_request->sat_protocol = sat_protocol;
switch (sat_protocol)
{
case SAT_PROTOCOL_FPDMA:
scic_sds_stp_optimized_request_construct(
this_request,
SCU_TASK_TYPE_FPDMAQ_READ,
transfer_length,
data_direction
);
// Copy over the SGL elements
if (do_translate_sgl == TRUE)
scic_sds_request_build_sgl(this_request);
break;
case SAT_PROTOCOL_UDMA_DATA_IN:
case SAT_PROTOCOL_UDMA_DATA_OUT:
scic_sds_stp_non_ncq_request_construct(this_request);
scic_sds_stp_optimized_request_construct(
this_request, SCU_TASK_TYPE_DMA_IN, transfer_length, data_direction
);
// Copy over the SGL elements
if (do_translate_sgl == TRUE)
scic_sds_request_build_sgl(this_request);
sci_base_state_machine_construct(
&this_request->started_substate_machine,
&this_request->parent.parent,
scic_sds_stp_request_started_udma_substate_table,
SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE
);
break;
case SAT_PROTOCOL_PIO_DATA_IN:
case SAT_PROTOCOL_PIO_DATA_OUT:
status = scic_sds_stp_pio_request_construct(
this_request, sat_protocol, copy_rx_frame);
break;
case SAT_PROTOCOL_ATA_HARD_RESET:
case SAT_PROTOCOL_SOFT_RESET:
status = scic_sds_stp_soft_reset_request_construct(this_request);
break;
case SAT_PROTOCOL_NON_DATA:
status = scic_sds_stp_non_data_request_construct(this_request);
break;
#if !defined(DISABLE_ATAPI)
case SAT_PROTOCOL_PACKET_NON_DATA:
case SAT_PROTOCOL_PACKET_DMA_DATA_IN:
case SAT_PROTOCOL_PACKET_DMA_DATA_OUT:
case SAT_PROTOCOL_PACKET_PIO_DATA_IN:
case SAT_PROTOCOL_PACKET_PIO_DATA_OUT:
status = scic_sds_stp_packet_request_construct(this_request);
if (do_translate_sgl == TRUE)
scic_sds_request_build_sgl(this_request);
break;
#endif
case SAT_PROTOCOL_DMA_QUEUED:
case SAT_PROTOCOL_DMA:
case SAT_PROTOCOL_DEVICE_DIAGNOSTIC:
case SAT_PROTOCOL_DEVICE_RESET:
case SAT_PROTOCOL_RETURN_RESPONSE_INFO:
default:
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x received un-handled SAT Protocol %d.\n",
this_request, sat_protocol
));
status = SCI_FAILURE;
break;
}
if (status == SCI_SUCCESS)
{
scic_sds_request_initialize_state_logging(this_request);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_CONSTRUCTED
);
}
return status;
}
//****************************************************************************
//* SCIC Interface Implementation
//****************************************************************************
void scic_stp_io_request_set_ncq_tag(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
U16 ncq_tag
)
{
/**
* @note This could be made to return an error to the user if the user
* attempts to set the NCQ tag in the wrong state.
*/
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T *)scic_io_request;
this_request->task_context_buffer->type.stp.ncq_tag = ncq_tag;
}
// ---------------------------------------------------------------------------
void * scic_stp_io_request_get_h2d_reg_address(
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T *)scic_io_request;
return this_request->command_buffer;
}
// ---------------------------------------------------------------------------
void * scic_stp_io_request_get_d2h_reg_address(
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
SCIC_SDS_STP_REQUEST_T * this_request = (SCIC_SDS_STP_REQUEST_T *)scic_io_request;
return &this_request->d2h_reg_fis;
}
/**
* Get the next SGL element from the request.
* - Check on which SGL element pair we are working
* - if working on SLG pair element A
* - advance to element B
* - else
* - check to see if there are more SGL element pairs
* for this IO request
* - if there are more SGL element pairs
* - advance to the next pair and return element A
*
* @param[in] this_request
*
* @return SCU_SGL_ELEMENT_T*
*/
SCU_SGL_ELEMENT_T * scic_sds_stp_request_pio_get_next_sgl(
SCIC_SDS_STP_REQUEST_T * this_request
)
{
SCU_SGL_ELEMENT_T * current_sgl;
if (this_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A)
{
if (
(this_request->type.pio.request_current.sgl_pair->B.address_lower == 0)
&& (this_request->type.pio.request_current.sgl_pair->B.address_upper == 0)
)
{
current_sgl = NULL;
}
else
{
this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_B;
current_sgl = &(this_request->type.pio.request_current.sgl_pair->B);
}
}
else
{
if (
(this_request->type.pio.request_current.sgl_pair->next_pair_lower == 0)
&& (this_request->type.pio.request_current.sgl_pair->next_pair_upper == 0)
)
{
current_sgl = NULL;
}
else
{
this_request->type.pio.request_current.sgl_pair =
scic_sds_request_get_sgl_element_pair(
&(this_request->parent),
++this_request->type.pio.sgl_pair_index
);
this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A;
current_sgl = &(this_request->type.pio.request_current.sgl_pair->A);
}
}
return current_sgl;
}
/**
* This method will construct the SATA PIO request.
*
* @param[in] scic_io_request The core request object which is cast to a SATA
* PIO request object.
*
* @return This method returns an indication as to whether the construction
* was successful.
* @retval SCI_SUCCESS Currently this method always returns this value.
*/
SCI_STATUS scic_sds_stp_pio_request_construct(
SCIC_SDS_REQUEST_T * scic_io_request,
U8 sat_protocol,
BOOL copy_rx_frame
)
{
SCIC_SDS_STP_REQUEST_T * this_request;
this_request = (SCIC_SDS_STP_REQUEST_T *)scic_io_request;
scic_sds_stp_non_ncq_request_construct(&this_request->parent);
scu_stp_raw_request_construct_task_context(
this_request, this_request->parent.task_context_buffer
);
this_request->type.pio.current_transfer_bytes = 0;
this_request->type.pio.ending_error = 0;
this_request->type.pio.ending_status = 0;
this_request->type.pio.request_current.sgl_offset = 0;
this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A;
this_request->type.pio.sat_protocol = sat_protocol;
this_request->type.pio.sgl_pair_index = 0;
if ((copy_rx_frame) || (sat_protocol == SAT_PROTOCOL_PIO_DATA_OUT))
{
scic_sds_request_build_sgl(&this_request->parent);
// Since the IO request copy of the TC contains the same data as
// the actual TC this pointer is vaild for either.
this_request->type.pio.request_current.sgl_pair =
&this_request->parent.task_context_buffer->sgl_pair_ab;
}
else
{
// The user does not want the data copied to the SGL buffer location
this_request->type.pio.request_current.sgl_pair = NULL;
}
sci_base_state_machine_construct(
&this_request->parent.started_substate_machine,
&this_request->parent.parent.parent,
scic_sds_stp_request_started_pio_substate_table,
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE
);
return SCI_SUCCESS;
}
//******************************************************************************
//* STP NON-DATA STATE MACHINE
//******************************************************************************
/**
* This method processes a TC completion. The expected TC completion is
* for the transmission of the H2D register FIS containing the SATA/STP
* non-data request.
*
* @param[in] this_request
* @param[in] completion_code
*
* @return This method always successfully processes the TC completion.
* @retval SCI_SUCCESS This value is always returned.
*/
static
SCI_STATUS scic_sds_stp_request_non_data_await_h2d_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_non_data_await_h2d_tc_completion_handler(0x%x, 0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
sci_base_state_machine_change_state(
&this_request->started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE
);
break;
default:
// All other completion status cause the IO to be complete. If a NAK
// was received, then it is up to the user to retry the request.
scic_sds_request_set_status(
this_request,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
}
return SCI_SUCCESS;
}
/**
* This method processes frames received from the target while waiting
* for a device to host register FIS. If a non-register FIS is received
* during this time, it is treated as a protocol violation from an
* IO perspective.
*
* @param[in] request This parameter specifies the request for which a
* frame has been received.
* @param[in] frame_index This parameter specifies the index of the frame
* that has been received.
*
* @return Indicate if the received frame was processed successfully.
*/
static
SCI_STATUS scic_sds_stp_request_non_data_await_d2h_frame_handler(
SCIC_SDS_REQUEST_T * request,
U32 frame_index
)
{
SCI_STATUS status;
SATA_FIS_HEADER_T * frame_header;
U32 * frame_buffer;
SCIC_SDS_STP_REQUEST_T * this_request = (SCIC_SDS_STP_REQUEST_T *)request;
// Save off the controller, so that we do not touch the request after it
// is completed.
SCIC_SDS_CONTROLLER_T * owning_controller = this_request->parent.owning_controller;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_non_data_await_d2h_frame_handler(0x%x, 0x%x) enter\n",
this_request, frame_index
));
status = scic_sds_unsolicited_frame_control_get_header(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_header
);
if (status == SCI_SUCCESS)
{
switch (frame_header->fis_type)
{
case SATA_FIS_TYPE_REGD2H:
scic_sds_unsolicited_frame_control_get_buffer(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_buffer
);
scic_sds_controller_copy_sata_response(
&this_request->d2h_reg_fis, (U32 *)frame_header, frame_buffer
);
// The command has completed with error
scic_sds_request_set_status(
&this_request->parent,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
break;
default:
SCIC_LOG_WARNING((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"IO Request:0x%x Frame Id:%d protocol violation occurred\n",
this_request, frame_index
));
scic_sds_request_set_status(
&this_request->parent,
SCU_TASK_DONE_UNEXP_FIS,
SCI_FAILURE_PROTOCOL_VIOLATION
);
break;
}
sci_base_state_machine_change_state(
&this_request->parent.parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
// Frame has been decoded return it to the controller
scic_sds_controller_release_frame(
owning_controller, frame_index
);
}
else
{
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x could not get frame header for frame index %d, status %x\n",
this_request, frame_index, status
));
}
return status;
}
// ---------------------------------------------------------------------------
SCIC_SDS_IO_REQUEST_STATE_HANDLER_T
scic_sds_stp_request_started_non_data_substate_handler_table
[SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_MAX_SUBSTATES] =
{
// SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_stp_request_non_data_await_h2d_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
},
// SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_stp_request_non_data_await_d2h_frame_handler
}
};
static
void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_non_data_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE
);
scic_sds_remote_device_set_working_request(
this_request->target_device, this_request
);
}
static
void scic_sds_stp_request_started_non_data_await_d2h_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_non_data_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE
);
}
// ---------------------------------------------------------------------------
SCI_BASE_STATE_T scic_sds_stp_request_started_non_data_substate_table
[SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_MAX_SUBSTATES] =
{
{
SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE,
scic_sds_stp_request_started_non_data_await_h2d_completion_enter,
NULL
},
{
SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE,
scic_sds_stp_request_started_non_data_await_d2h_enter,
NULL
}
};
//******************************************************************************
//* STP PIO STATE MACHINE
//******************************************************************************
#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 // 1K is the maximum SCU frame data payload
/**
* This function will transmit DATA_FIS from (current sgl + offset) for input parameter length.
* current sgl and offset is alreay stored in the IO request
*
* @param[in] this_request
* @param[in] length
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_pio_data_out_trasmit_data_frame (
SCIC_SDS_REQUEST_T * this_request,
U32 length
)
{
SCI_STATUS status = SCI_SUCCESS;
SCU_SGL_ELEMENT_T * current_sgl;
SCIC_SDS_STP_REQUEST_T * this_sds_stp_request = (SCIC_SDS_STP_REQUEST_T *)this_request;
// Recycle the TC and reconstruct it for sending out DATA FIS containing
// for the data from current_sgl+offset for the input length
SCU_TASK_CONTEXT_T * task_context = scic_sds_controller_get_task_context_buffer(
this_request->owning_controller,
this_request->io_tag
);
if (this_sds_stp_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A)
{
current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->A);
}
else
{
current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->B);
}
//update the TC
task_context->command_iu_upper = current_sgl->address_upper;
task_context->command_iu_lower = current_sgl->address_lower;
task_context->transfer_length_bytes = length;
task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA;
// send the new TC out.
status = this_request->owning_controller->state_handlers->parent.continue_io_handler(
&this_request->owning_controller->parent,
&this_request->target_device->parent,
&this_request->parent
);
return status;
}
/**
*
*
* @param[in] this_request
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_pio_data_out_transmit_data(
SCIC_SDS_REQUEST_T * this_sds_request
)
{
SCU_SGL_ELEMENT_T * current_sgl;
U32 sgl_offset;
U32 remaining_bytes_in_current_sgl = 0;
SCI_STATUS status = SCI_SUCCESS;
SCIC_SDS_STP_REQUEST_T * this_sds_stp_request = (SCIC_SDS_STP_REQUEST_T *)this_sds_request;
sgl_offset = this_sds_stp_request->type.pio.request_current.sgl_offset;
if (this_sds_stp_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A)
{
current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->A);
remaining_bytes_in_current_sgl = this_sds_stp_request->type.pio.request_current.sgl_pair->A.length - sgl_offset;
}
else
{
current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->B);
remaining_bytes_in_current_sgl = this_sds_stp_request->type.pio.request_current.sgl_pair->B.length - sgl_offset;
}
if (this_sds_stp_request->type.pio.pio_transfer_bytes > 0)
{
if (this_sds_stp_request->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl )
{
//recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl
status = scic_sds_stp_request_pio_data_out_trasmit_data_frame (this_sds_request, remaining_bytes_in_current_sgl);
if (status == SCI_SUCCESS)
{
this_sds_stp_request->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl;
sgl_offset = 0;
}
}
else if (this_sds_stp_request->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl )
{
//recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes
scic_sds_stp_request_pio_data_out_trasmit_data_frame (this_sds_request, this_sds_stp_request->type.pio.pio_transfer_bytes);
if (status == SCI_SUCCESS)
{
//Sgl offset will be adjusted and saved for future
sgl_offset += this_sds_stp_request->type.pio.pio_transfer_bytes;
current_sgl->address_lower += this_sds_stp_request->type.pio.pio_transfer_bytes;
this_sds_stp_request->type.pio.pio_transfer_bytes = 0;
}
}
}
if (status == SCI_SUCCESS)
{
this_sds_stp_request->type.pio.request_current.sgl_offset = sgl_offset;
}
return status;
}
/**
* Copy the data from the buffer for the length specified to the IO reqeust
* SGL specified data region.
*
* @param[in] this_request The request that is used for the SGL processing.
* @param[in] data_buffer The buffer of data to be copied.
* @param[in] length The length of the data transfer.
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_pio_data_in_copy_data_buffer(
SCIC_SDS_STP_REQUEST_T * this_request,
U8 * data_buffer,
U32 length
)
{
SCI_STATUS status;
SCU_SGL_ELEMENT_T * current_sgl;
U32 sgl_offset;
U32 data_offset;
U8 * source_address;
// Initial setup to get the current working SGL and the offset within the buffer
current_sgl =
(this_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) ?
&(this_request->type.pio.request_current.sgl_pair->A) :
&(this_request->type.pio.request_current.sgl_pair->B) ;
sgl_offset = this_request->type.pio.request_current.sgl_offset;
source_address = data_buffer;
data_offset = this_request->type.pio.current_transfer_bytes;
status = SCI_SUCCESS;
// While we are still doing Ok and there is more data to transfer
while (
(length > 0)
&& (status == SCI_SUCCESS)
)
{
if (current_sgl->length == sgl_offset)
{
// This SGL has been exauhasted so we need to get the next SGL
current_sgl = scic_sds_stp_request_pio_get_next_sgl(this_request);
if (current_sgl == NULL)
status = SCI_FAILURE;
else
sgl_offset = 0;
}
else
{
#ifdef ENABLE_OSSL_COPY_BUFFER
scic_cb_io_request_copy_buffer(this_request, data_buffer, data_offset, length);
length = 0;
#else
U8 * destination_address;
U32 copy_length;
destination_address = (U8 *)scic_cb_io_request_get_virtual_address_from_sgl(
this_request,
data_offset
);
copy_length = MIN(length, current_sgl->length - sgl_offset);
memcpy(destination_address, source_address, copy_length);
length -= copy_length;
sgl_offset += copy_length;
data_offset += copy_length;
#endif
}
}
this_request->type.pio.request_current.sgl_offset = sgl_offset;
return status;
}
/**
* Copy the data buffer to the io request data region.
*
* @param[in] this_request The PIO DATA IN request that is to receive the
* data.
* @param[in] data_buffer The buffer to copy from.
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_pio_data_in_copy_data(
SCIC_SDS_STP_REQUEST_T * this_request,
U8 * data_buffer
)
{
SCI_STATUS status;
// If there is less than 1K remaining in the transfer request
// copy just the data for the transfer
if (this_request->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE)
{
status = scic_sds_stp_request_pio_data_in_copy_data_buffer(
this_request,data_buffer,this_request->type.pio.pio_transfer_bytes);
if (status == SCI_SUCCESS)
{
// All data for this PIO request has now been copied, so we don't
// technically need to update current_transfer_bytes here - just
// doing it for completeness.
this_request->type.pio.current_transfer_bytes += this_request->type.pio.pio_transfer_bytes;
this_request->type.pio.pio_transfer_bytes = 0;
}
}
else
{
// We are transfering the whole frame so copy
status = scic_sds_stp_request_pio_data_in_copy_data_buffer(
this_request, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE);
if (status == SCI_SUCCESS)
{
this_request->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE;
this_request->type.pio.current_transfer_bytes += SCU_MAX_FRAME_BUFFER_SIZE;
}
}
return status;
}
/**
*
*
* @param[in] this_request
* @param[in] completion_code
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCI_STATUS status = SCI_SUCCESS;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_pio_data_in_await_h2d_completion_tc_completion_handler(0x%x, 0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
sci_base_state_machine_change_state(
&this_request->started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
);
break;
default:
// All other completion status cause the IO to be complete. If a NAK
// was received, then it is up to the user to retry the request.
scic_sds_request_set_status(
this_request,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
}
return status;
}
/**
*
*
* @param[in] this_request
* @param[in] frame_index
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_pio_await_frame_frame_handler(
SCIC_SDS_REQUEST_T * request,
U32 frame_index
)
{
SCI_STATUS status;
SATA_FIS_HEADER_T * frame_header;
U32 * frame_buffer;
SCIC_SDS_STP_REQUEST_T * this_request;
SCIC_SDS_CONTROLLER_T * owning_controller;
this_request = (SCIC_SDS_STP_REQUEST_T *)request;
// Save off the controller, so that we do not touch the request after it
// is completed.
owning_controller = this_request->parent.owning_controller;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_pio_data_in_await_frame_frame_handler(0x%x, 0x%x) enter\n",
this_request, frame_index
));
status = scic_sds_unsolicited_frame_control_get_header(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_header
);
if (status == SCI_SUCCESS)
{
switch (frame_header->fis_type)
{
case SATA_FIS_TYPE_PIO_SETUP:
// Get from the frame buffer the PIO Setup Data
scic_sds_unsolicited_frame_control_get_buffer(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_buffer
);
// Get the data from the PIO Setup
// The SCU Hardware returns first word in the frame_header and the rest
// of the data is in the frame buffer so we need to back up one dword
this_request->type.pio.pio_transfer_bytes =
(U16)((SATA_FIS_PIO_SETUP_T *)(&frame_buffer[-1]))->transfter_count;
this_request->type.pio.ending_status =
(U8)((SATA_FIS_PIO_SETUP_T *)(&frame_buffer[-1]))->ending_status;
scic_sds_controller_copy_sata_response(
&this_request->d2h_reg_fis, (U32 *)frame_header, frame_buffer
);
this_request->d2h_reg_fis.status =
this_request->type.pio.ending_status;
//The next state is dependent on whether the request was PIO Data-in or Data out
if (this_request->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_IN)
{
sci_base_state_machine_change_state(
&this_request->parent.started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE
);
}
else if (this_request->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_OUT)
{
//Transmit data
status = scic_sds_stp_request_pio_data_out_transmit_data ( request);
if (status == SCI_SUCCESS)
{
sci_base_state_machine_change_state(
&this_request->parent.started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE
);
}
}
break;
case SATA_FIS_TYPE_SETDEVBITS:
sci_base_state_machine_change_state(
&this_request->parent.started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
);
break;
case SATA_FIS_TYPE_REGD2H:
if ( (frame_header->status & ATA_STATUS_REG_BSY_BIT) == 0)
{
scic_sds_unsolicited_frame_control_get_buffer(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_buffer
);
scic_sds_controller_copy_sata_response(
&this_request->d2h_reg_fis, (U32 *)frame_header, frame_buffer);
scic_sds_request_set_status(
&this_request->parent,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
sci_base_state_machine_change_state(
&this_request->parent.parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
}
else
{
// Now why is the drive sending a D2H Register FIS when it is still busy?
// Do nothing since we are still in the right state.
SCIC_LOG_INFO((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC PIO Request 0x%x received D2H Register FIS with BSY status 0x%x\n",
this_request, frame_header->status
));
}
break;
default:
break;
}
// Frame is decoded return it to the controller
scic_sds_controller_release_frame(
owning_controller,
frame_index
);
}
else
{
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x could not get frame header for frame index %d, status %x\n",
this_request, frame_index, status
));
}
return status;
}
/**
*
*
* @param[in] this_request
* @param[in] frame_index
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_pio_data_in_await_data_frame_handler(
SCIC_SDS_REQUEST_T * request,
U32 frame_index
)
{
SCI_STATUS status;
SATA_FIS_HEADER_T * frame_header;
SATA_FIS_DATA_T * frame_buffer;
SCIC_SDS_STP_REQUEST_T * this_request;
SCIC_SDS_CONTROLLER_T * owning_controller;
this_request = (SCIC_SDS_STP_REQUEST_T *)request;
// Save off the controller, so that we do not touch the request after it
// is completed.
owning_controller = this_request->parent.owning_controller;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_pio_data_in_await_data_frame_handler(0x%x, 0x%x) enter\n",
this_request, frame_index
));
status = scic_sds_unsolicited_frame_control_get_header(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_header
);
if (status == SCI_SUCCESS)
{
if (frame_header->fis_type == SATA_FIS_TYPE_DATA)
{
if (this_request->type.pio.request_current.sgl_pair == NULL)
{
this_request->parent.saved_rx_frame_index = frame_index;
this_request->type.pio.pio_transfer_bytes = 0;
}
else
{
status = scic_sds_unsolicited_frame_control_get_buffer(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_buffer
);
status = scic_sds_stp_request_pio_data_in_copy_data(this_request, (U8 *)frame_buffer);
// Frame is decoded return it to the controller
scic_sds_controller_release_frame(
owning_controller,
frame_index
);
}
// Check for the end of the transfer, are there more bytes remaining
// for this data transfer
if (
(status == SCI_SUCCESS)
&& (this_request->type.pio.pio_transfer_bytes == 0)
)
{
if ((this_request->type.pio.ending_status & ATA_STATUS_REG_BSY_BIT) == 0)
{
scic_sds_request_set_status(
&this_request->parent,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
sci_base_state_machine_change_state(
&this_request->parent.parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
}
else
{
sci_base_state_machine_change_state(
&this_request->parent.started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
);
}
}
}
else
{
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC PIO Request 0x%x received frame %d with fis type 0x%02x when expecting a data fis.\n",
this_request, frame_index, frame_header->fis_type
));
scic_sds_request_set_status(
&this_request->parent,
SCU_TASK_DONE_GOOD,
SCI_FAILURE_IO_REQUIRES_SCSI_ABORT
);
sci_base_state_machine_change_state(
&this_request->parent.parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
// Frame is decoded return it to the controller
scic_sds_controller_release_frame(
owning_controller,
frame_index
);
}
}
else
{
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x could not get frame header for frame index %d, status %x\n",
this_request, frame_index, status
));
}
return status;
}
/**
*
*
* @param[in] this_request
* @param[in] completion_code
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCI_STATUS status = SCI_SUCCESS;
BOOL all_frames_transferred = FALSE;
SCIC_SDS_STP_REQUEST_T *this_scic_sds_stp_request = (SCIC_SDS_STP_REQUEST_T *) this_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_pio_data_in_await_h2d_completion_tc_completion_handler(0x%x, 0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
//Transmit data
if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes != 0)
{
status = scic_sds_stp_request_pio_data_out_transmit_data ( this_request);
if (status == SCI_SUCCESS)
{
if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes == 0)
all_frames_transferred = TRUE;
}
}
else if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes == 0)
{
//this will happen if the all data is written at the first time after the pio setup fis is recieved
all_frames_transferred = TRUE;
}
//all data transferred.
if (all_frames_transferred)
{
//Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE
//and wait for PIO_SETUP fis / or D2H REg fis.
sci_base_state_machine_change_state(
&this_request->started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
);
}
break;
default:
// All other completion status cause the IO to be complete. If a NAK
// was received, then it is up to the user to retry the request.
scic_sds_request_set_status(
this_request,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
}
return status;
}
/**
* This method will handle any link layer events while waiting for the data
* frame.
*
* @param[in] request This is the request which is receiving the event.
* @param[in] event_code This is the event code that the request on which the
* request is expected to take action.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
* @retval SCI_FAILURE
*/
static
SCI_STATUS scic_sds_stp_request_pio_data_in_await_data_event_handler(
SCIC_SDS_REQUEST_T * request,
U32 event_code
)
{
SCI_STATUS status;
switch (scu_get_event_specifier(event_code))
{
case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT:
// We are waiting for data and the SCU has R_ERR the data frame.
// Go back to waiting for the D2H Register FIS
sci_base_state_machine_change_state(
&request->started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
);
status = SCI_SUCCESS;
break;
default:
SCIC_LOG_ERROR((
sci_base_object_get_logger(request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC PIO Request 0x%x received unexpected event 0x%08x\n",
request, event_code
));
/// @todo Should we fail the PIO request when we get an unexpected event?
status = SCI_FAILURE;
break;
}
return status;
}
// ---------------------------------------------------------------------------
SCIC_SDS_IO_REQUEST_STATE_HANDLER_T
scic_sds_stp_request_started_pio_substate_handler_table
[SCIC_SDS_STP_REQUEST_STARTED_PIO_MAX_SUBSTATES] =
{
// SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
},
// SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
{
{
scic_sds_request_default_start_handler,
//scic_sds_stp_pio_request_data_in_await_frame_abort_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_stp_request_pio_await_frame_frame_handler
},
// SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE
{
{
scic_sds_request_default_start_handler,
//scic_sds_stp_pio_request_data_in_await_data_abort_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_stp_request_pio_data_in_await_data_event_handler,
scic_sds_stp_request_pio_data_in_await_data_frame_handler
},
//SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
}
};
static
void scic_sds_stp_request_started_pio_await_h2d_completion_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_pio_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE
);
scic_sds_remote_device_set_working_request(
this_request->target_device, this_request);
}
static
void scic_sds_stp_request_started_pio_await_frame_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_pio_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
);
}
static
void scic_sds_stp_request_started_pio_data_in_await_data_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_pio_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE
);
}
static
void scic_sds_stp_request_started_pio_data_out_transmit_data_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_pio_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE
);
}
// ---------------------------------------------------------------------------
SCI_BASE_STATE_T
scic_sds_stp_request_started_pio_substate_table
[SCIC_SDS_STP_REQUEST_STARTED_PIO_MAX_SUBSTATES] =
{
{
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE,
scic_sds_stp_request_started_pio_await_h2d_completion_enter,
NULL
},
{
SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE,
scic_sds_stp_request_started_pio_await_frame_enter,
NULL
},
{
SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE,
scic_sds_stp_request_started_pio_data_in_await_data_enter,
NULL
},
{
SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE,
scic_sds_stp_request_started_pio_data_out_transmit_data_enter,
NULL
}
};
//******************************************************************************
//* UDMA REQUEST STATE MACHINE
//******************************************************************************
static
void scic_sds_stp_request_udma_complete_request(
SCIC_SDS_REQUEST_T * this_request,
U32 scu_status,
SCI_STATUS sci_status
)
{
scic_sds_request_set_status(
this_request, scu_status, sci_status
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
}
/**
*
*
* @param[in] this_request
* @param[in] frame_index
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_udma_general_frame_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 frame_index
)
{
SCI_STATUS status;
SATA_FIS_HEADER_T * frame_header;
U32 * frame_buffer;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_pio_request_data_in_await_frame_frame_handler(0x%x, 0x%x) enter\n",
this_request, frame_index
));
status = scic_sds_unsolicited_frame_control_get_header(
&this_request->owning_controller->uf_control,
frame_index,
(void**) &frame_header
);
if (
(status == SCI_SUCCESS)
&& (frame_header->fis_type == SATA_FIS_TYPE_REGD2H)
)
{
scic_sds_unsolicited_frame_control_get_buffer(
&this_request->owning_controller->uf_control,
frame_index,
(void**) &frame_buffer
);
scic_sds_controller_copy_sata_response(
&((SCIC_SDS_STP_REQUEST_T *)this_request)->d2h_reg_fis,
(U32 *)frame_header,
frame_buffer
);
}
scic_sds_controller_release_frame(
this_request->owning_controller, frame_index);
return status;
}
/**
* @brief This method process TC completions while in the state where
* we are waiting for TC completions.
*
* @param[in] this_request
* @param[in] completion_code
*
* @return SCI_STATUS
*/
static
SCI_STATUS scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler(
SCIC_SDS_REQUEST_T * request,
U32 completion_code
)
{
SCI_STATUS status = SCI_SUCCESS;
SCIC_SDS_STP_REQUEST_T * this_request = (SCIC_SDS_STP_REQUEST_T *)request;
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
scic_sds_stp_request_udma_complete_request(
&this_request->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
break;
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
// We must check ther response buffer to see if the D2H Register FIS was
// received before we got the TC completion.
if (this_request->d2h_reg_fis.fis_type == SATA_FIS_TYPE_REGD2H)
{
scic_sds_remote_device_suspend(
this_request->parent.target_device,
SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))
);
scic_sds_stp_request_udma_complete_request(
&this_request->parent,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
}
else
{
// If we have an error completion status for the TC then we can expect a
// D2H register FIS from the device so we must change state to wait for it
sci_base_state_machine_change_state(
&this_request->parent.started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE
);
}
break;
/// @todo Check to see if any of these completion status need to wait for
/// the device to host register fis.
/// @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR):
scic_sds_remote_device_suspend(
this_request->parent.target_device,
SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))
);
// Fall through to the default case
default:
// All other completion status cause the IO to be complete.
SCIC_LOG_ERROR((
sci_base_object_get_logger(&this_request->parent),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x returning CONTROLLER_SPECIFIC_IO_ERR for completion code 0x%x\n",
&this_request->parent, completion_code
));
scic_sds_stp_request_udma_complete_request(
&this_request->parent,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
break;
}
return status;
}
static
SCI_STATUS scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 frame_index
)
{
SCI_STATUS status;
// Use the general frame handler to copy the resposne data
status = scic_sds_stp_request_udma_general_frame_handler(this_request, frame_index);
if (status == SCI_SUCCESS)
{
scic_sds_stp_request_udma_complete_request(
this_request,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
}
return status;
}
// ---------------------------------------------------------------------------
SCIC_SDS_IO_REQUEST_STATE_HANDLER_T
scic_sds_stp_request_started_udma_substate_handler_table
[SCIC_SDS_STP_REQUEST_STARTED_UDMA_MAX_SUBSTATES] =
{
// SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_stp_request_udma_general_frame_handler
},
// SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler
}
};
/**
*
*
* @param[in] object
*/
static
void scic_sds_stp_request_started_udma_await_tc_completion_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_udma_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE
);
}
/**
* This state is entered when there is an TC completion failure. The hardware
* received an unexpected condition while processing the IO request and now
* will UF the D2H register FIS to complete the IO.
*
* @param[in] object
*/
static
void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_udma_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE
);
}
// ---------------------------------------------------------------------------
SCI_BASE_STATE_T
scic_sds_stp_request_started_udma_substate_table
[SCIC_SDS_STP_REQUEST_STARTED_UDMA_MAX_SUBSTATES] =
{
{
SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE,
scic_sds_stp_request_started_udma_await_tc_completion_enter,
NULL
},
{
SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE,
scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter,
NULL
}
};
//******************************************************************************
//* STP SOFT RESET STATE MACHINE
//******************************************************************************
/**
* This method processes a TC completion. The expected TC completion is
* for the transmission of the H2D register FIS containing the SATA/STP
* non-data request.
*
* @param[in] this_request
* @param[in] completion_code
*
* @return This method always successfully processes the TC completion.
* @retval SCI_SUCCESS This value is always returned.
*/
static
SCI_STATUS scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_soft_reset_await_h2d_tc_completion_handler(0x%x, 0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
sci_base_state_machine_change_state(
&this_request->started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE
);
break;
default:
// All other completion status cause the IO to be complete. If a NAK
// was received, then it is up to the user to retry the request.
scic_sds_request_set_status(
this_request,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
}
return SCI_SUCCESS;
}
/**
* This method processes a TC completion. The expected TC completion is
* for the transmission of the H2D register FIS containing the SATA/STP
* non-data request.
*
* @param[in] this_request
* @param[in] completion_code
*
* @return This method always successfully processes the TC completion.
* @retval SCI_SUCCESS This value is always returned.
*/
static
SCI_STATUS scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_soft_reset_await_h2d_tc_completion_handler(0x%x, 0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
sci_base_state_machine_change_state(
&this_request->started_substate_machine,
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE
);
break;
default:
// All other completion status cause the IO to be complete. If a NAK
// was received, then it is up to the user to retry the request.
scic_sds_request_set_status(
this_request,
SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
}
return SCI_SUCCESS;
}
/**
* This method processes frames received from the target while waiting
* for a device to host register FIS. If a non-register FIS is received
* during this time, it is treated as a protocol violation from an
* IO perspective.
*
* @param[in] request This parameter specifies the request for which a
* frame has been received.
* @param[in] frame_index This parameter specifies the index of the frame
* that has been received.
*
* @return Indicate if the received frame was processed successfully.
*/
static
SCI_STATUS scic_sds_stp_request_soft_reset_await_d2h_frame_handler(
SCIC_SDS_REQUEST_T * request,
U32 frame_index
)
{
SCI_STATUS status;
SATA_FIS_HEADER_T * frame_header;
U32 * frame_buffer;
SCIC_SDS_STP_REQUEST_T * this_request = (SCIC_SDS_STP_REQUEST_T *)request;
// Save off the controller, so that we do not touch the request after it
// is completed.
SCIC_SDS_CONTROLLER_T * owning_controller = this_request->parent.owning_controller;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_sds_stp_request_soft_reset_await_d2h_frame_handler(0x%x, 0x%x) enter\n",
this_request, frame_index
));
status = scic_sds_unsolicited_frame_control_get_header(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_header
);
if (status == SCI_SUCCESS)
{
switch (frame_header->fis_type)
{
case SATA_FIS_TYPE_REGD2H:
scic_sds_unsolicited_frame_control_get_buffer(
&(owning_controller->uf_control),
frame_index,
(void**) &frame_buffer
);
scic_sds_controller_copy_sata_response(
&this_request->d2h_reg_fis, (U32 *)frame_header, frame_buffer
);
// The command has completed with error
scic_sds_request_set_status(
&this_request->parent,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
break;
default:
SCIC_LOG_WARNING((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"IO Request:0x%x Frame Id:%d protocol violation occurred\n",
this_request, frame_index
));
scic_sds_request_set_status(
&this_request->parent,
SCU_TASK_DONE_UNEXP_FIS,
SCI_FAILURE_PROTOCOL_VIOLATION
);
break;
}
sci_base_state_machine_change_state(
&this_request->parent.parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
// Frame has been decoded return it to the controller
scic_sds_controller_release_frame(
owning_controller, frame_index
);
}
else
{
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x could not get frame header for frame index %d, status %x\n",
this_request, frame_index, status
));
}
return status;
}
// ---------------------------------------------------------------------------
SCIC_SDS_IO_REQUEST_STATE_HANDLER_T
scic_sds_stp_request_started_soft_reset_substate_handler_table
[SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_MAX_SUBSTATES] =
{
// SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
},
// SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
},
// SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_stp_request_soft_reset_await_d2h_frame_handler
}
};
static
void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_soft_reset_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE
);
scic_sds_remote_device_set_working_request(
this_request->target_device, this_request
);
}
static
void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(
SCI_BASE_OBJECT_T *object
)
{
SCI_STATUS status;
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SATA_FIS_REG_H2D_T *h2d_fis;
SCU_TASK_CONTEXT_T *task_context;
// Clear the SRST bit
h2d_fis = scic_stp_io_request_get_h2d_reg_address(this_request);
h2d_fis->control = 0;
// Clear the TC control bit
task_context = scic_sds_controller_get_task_context_buffer(
this_request->owning_controller, this_request->io_tag);
task_context->control_frame = 0;
status = this_request->owning_controller->state_handlers->parent.continue_io_handler(
&this_request->owning_controller->parent,
&this_request->target_device->parent,
&this_request->parent
);
if (status == SCI_SUCCESS)
{
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_soft_reset_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE
);
}
}
static
void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_stp_request_started_soft_reset_substate_handler_table,
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE
);
}
// ---------------------------------------------------------------------------
SCI_BASE_STATE_T
scic_sds_stp_request_started_soft_reset_substate_table
[SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_MAX_SUBSTATES] =
{
{
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE,
scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter,
NULL
},
{
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE,
scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter,
NULL
},
{
SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE,
scic_sds_stp_request_started_soft_reset_await_d2h_response_enter,
NULL
}
};
// ---------------------------------------------------------------------------
SCI_STATUS scic_io_request_construct_basic_sata(
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
SCI_STATUS status;
SCIC_SDS_REQUEST_T * request = (SCIC_SDS_REQUEST_T *)scic_io_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(scic_io_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_io_request_construct_basic_sata(0x%x) enter\n",
scic_io_request
));
status = scic_sds_io_request_construct_sata(
request,
scic_cb_request_get_sat_protocol(request->user_request),
scic_cb_io_request_get_transfer_length(request->user_request),
scic_cb_io_request_get_data_direction(request->user_request),
scic_cb_io_request_do_copy_rx_frames(request->user_request),
TRUE
);
return status;
}
// ---------------------------------------------------------------------------
SCI_STATUS scic_io_request_construct_advanced_sata(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
SCIC_IO_SATA_PARAMETERS_T * io_parameters
)
{
SCI_STATUS status;
SCIC_SDS_REQUEST_T * request = (SCIC_SDS_REQUEST_T *)scic_io_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(scic_io_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_io_request_construct_basic_sata(0x%x) enter\n",
scic_io_request
));
status = scic_sds_io_request_construct_sata(
request,
scic_cb_request_get_sat_protocol(request->user_request),
scic_sds_request_get_sgl_element_pair(request, 0)->A.length,
scic_cb_io_request_get_data_direction(request->user_request),
scic_cb_io_request_do_copy_rx_frames(request->user_request),
io_parameters->do_translate_sgl
);
return status;
}