| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/ufm/@/dev/tl/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/ufm/@/dev/tl/if_tlreg.h |
/*-
* Copyright (c) 1997, 1998
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/tl/if_tlreg.h 227277 2011-11-06 21:09:10Z marius $
*/
struct tl_type {
u_int16_t tl_vid;
u_int16_t tl_did;
const char *tl_name;
};
/*
* ThunderLAN TX/RX list format. The TX and RX lists are pretty much
* identical: the list begins with a 32-bit forward pointer which points
* at the next list in the chain, followed by 16 bits for the total
* frame size, and a 16 bit status field. This is followed by a series
* of 10 32-bit data count/data address pairs that point to the fragments
* that make up the complete frame.
*/
#define TL_MAXFRAGS 10
#define TL_RX_LIST_CNT 64
#define TL_TX_LIST_CNT 128
#define TL_MIN_FRAMELEN 64
struct tl_frag {
u_int32_t tlist_dcnt;
u_int32_t tlist_dadr;
};
struct tl_list {
u_int32_t tlist_fptr; /* phys address of next list */
u_int16_t tlist_cstat; /* status word */
u_int16_t tlist_frsize; /* size of data in frame */
struct tl_frag tl_frag[TL_MAXFRAGS];
};
/*
* This is a special case of an RX list. By setting the One_Frag
* bit in the NETCONFIG register, the driver can force the ThunderLAN
* chip to use only one fragment when DMAing RX frames.
*/
struct tl_list_onefrag {
u_int32_t tlist_fptr;
u_int16_t tlist_cstat;
u_int16_t tlist_frsize;
struct tl_frag tl_frag;
};
struct tl_list_data {
struct tl_list_onefrag tl_rx_list[TL_RX_LIST_CNT];
struct tl_list tl_tx_list[TL_TX_LIST_CNT];
unsigned char tl_pad[TL_MIN_FRAMELEN];
};
struct tl_chain {
struct tl_list *tl_ptr;
struct mbuf *tl_mbuf;
struct tl_chain *tl_next;
};
struct tl_chain_onefrag {
struct tl_list_onefrag *tl_ptr;
struct mbuf *tl_mbuf;
struct tl_chain_onefrag *tl_next;
};
struct tl_chain_data {
struct tl_chain_onefrag tl_rx_chain[TL_RX_LIST_CNT];
struct tl_chain tl_tx_chain[TL_TX_LIST_CNT];
struct tl_chain_onefrag *tl_rx_head;
struct tl_chain_onefrag *tl_rx_tail;
struct tl_chain *tl_tx_head;
struct tl_chain *tl_tx_tail;
struct tl_chain *tl_tx_free;
};
struct tl_softc {
struct ifnet *tl_ifp;
device_t tl_dev;
struct ifmedia ifmedia; /* media info */
void *tl_intrhand;
struct resource *tl_irq;
struct resource *tl_res;
device_t tl_miibus;
u_int8_t tl_eeaddr;
struct tl_list_data *tl_ldata; /* TX/RX lists and mbufs */
struct tl_chain_data tl_cdata;
u_int8_t tl_txeoc;
u_int8_t tl_bitrate;
int tl_if_flags;
struct callout tl_stat_callout;
struct mtx tl_mtx;
int tl_timer;
};
#define TL_LOCK(_sc) mtx_lock(&(_sc)->tl_mtx)
#define TL_UNLOCK(_sc) mtx_unlock(&(_sc)->tl_mtx)
#define TL_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->tl_mtx, MA_OWNED)
/*
* Transmit interrupt threshold.
*/
#define TX_THR 0x00000004
/*
* General constants that are fun to know.
*
* The ThunderLAN controller is made by Texas Instruments. The
* manual indicates that if the EEPROM checksum fails, the PCI
* vendor and device ID registers will be loaded with TI-specific
* values.
*/
#define TI_VENDORID 0x104C
#define TI_DEVICEID_THUNDERLAN 0x0500
/*
* These are the PCI vendor and device IDs for Compaq ethernet
* adapters based on the ThunderLAN controller.
*/
#define COMPAQ_VENDORID 0x0E11
#define COMPAQ_DEVICEID_NETEL_10_100 0xAE32
#define COMPAQ_DEVICEID_NETEL_UNKNOWN 0xAE33
#define COMPAQ_DEVICEID_NETEL_10 0xAE34
#define COMPAQ_DEVICEID_NETFLEX_3P_INTEGRATED 0xAE35
#define COMPAQ_DEVICEID_NETEL_10_100_DUAL 0xAE40
#define COMPAQ_DEVICEID_NETEL_10_100_PROLIANT 0xAE43
#define COMPAQ_DEVICEID_NETEL_10_100_EMBEDDED 0xB011
#define COMPAQ_DEVICEID_NETEL_10_T2_UTP_COAX 0xB012
#define COMPAQ_DEVICEID_NETEL_10_100_TX_UTP 0xB030
#define COMPAQ_DEVICEID_NETFLEX_3P 0xF130
#define COMPAQ_DEVICEID_NETFLEX_3P_BNC 0xF150
/*
* These are the PCI vendor and device IDs for Olicom
* adapters based on the ThunderLAN controller.
*/
#define OLICOM_VENDORID 0x108D
#define OLICOM_DEVICEID_OC2183 0x0013
#define OLICOM_DEVICEID_OC2325 0x0012
#define OLICOM_DEVICEID_OC2326 0x0014
/*
* PCI low memory base and low I/O base
*/
#define TL_PCI_LOIO 0x10
#define TL_PCI_LOMEM 0x14
/*
* PCI latency timer (it's actually 0x0D, but we want a value
* that's longword aligned).
*/
#define TL_PCI_LATENCY_TIMER 0x0C
#define TL_DIO_ADDR_INC 0x8000 /* Increment addr on each read */
#define TL_DIO_RAM_SEL 0x4000 /* RAM address select */
#define TL_DIO_ADDR_MASK 0x3FFF /* address bits mask */
/*
* Interrupt types
*/
#define TL_INTR_INVALID 0x0
#define TL_INTR_TXEOF 0x1
#define TL_INTR_STATOFLOW 0x2
#define TL_INTR_RXEOF 0x3
#define TL_INTR_DUMMY 0x4
#define TL_INTR_TXEOC 0x5
#define TL_INTR_ADCHK 0x6
#define TL_INTR_RXEOC 0x7
#define TL_INT_MASK 0x001C
#define TL_VEC_MASK 0x1FE0
/*
* Host command register bits
*/
#define TL_CMD_GO 0x80000000
#define TL_CMD_STOP 0x40000000
#define TL_CMD_ACK 0x20000000
#define TL_CMD_CHSEL7 0x10000000
#define TL_CMD_CHSEL6 0x08000000
#define TL_CMD_CHSEL5 0x04000000
#define TL_CMD_CHSEL4 0x02000000
#define TL_CMD_CHSEL3 0x01000000
#define TL_CMD_CHSEL2 0x00800000
#define TL_CMD_CHSEL1 0x00400000
#define TL_CMD_CHSEL0 0x00200000
#define TL_CMD_EOC 0x00100000
#define TL_CMD_RT 0x00080000
#define TL_CMD_NES 0x00040000
#define TL_CMD_ZERO0 0x00020000
#define TL_CMD_ZERO1 0x00010000
#define TL_CMD_ADRST 0x00008000
#define TL_CMD_LDTMR 0x00004000
#define TL_CMD_LDTHR 0x00002000
#define TL_CMD_REQINT 0x00001000
#define TL_CMD_INTSOFF 0x00000800
#define TL_CMD_INTSON 0x00000400
#define TL_CMD_RSVD0 0x00000200
#define TL_CMD_RSVD1 0x00000100
#define TL_CMD_ACK7 0x00000080
#define TL_CMD_ACK6 0x00000040
#define TL_CMD_ACK5 0x00000020
#define TL_CMD_ACK4 0x00000010
#define TL_CMD_ACK3 0x00000008
#define TL_CMD_ACK2 0x00000004
#define TL_CMD_ACK1 0x00000002
#define TL_CMD_ACK0 0x00000001
#define TL_CMD_CHSEL_MASK 0x01FE0000
#define TL_CMD_ACK_MASK 0xFF
/*
* EEPROM address where station address resides.
*/
#define TL_EEPROM_EADDR 0x83
#define TL_EEPROM_EADDR2 0x99
#define TL_EEPROM_EADDR3 0xAF
#define TL_EEPROM_EADDR_OC 0xF8 /* Olicom cards use a different
address than Compaqs. */
/*
* ThunderLAN host command register offsets.
* (Can be accessed either by IO ports or memory map.)
*/
#define TL_HOSTCMD 0x00
#define TL_CH_PARM 0x04
#define TL_DIO_ADDR 0x08
#define TL_HOST_INT 0x0A
#define TL_DIO_DATA 0x0C
/*
* ThunderLAN internal registers
*/
#define TL_NETCMD 0x00
#define TL_NETSIO 0x01
#define TL_NETSTS 0x02
#define TL_NETMASK 0x03
#define TL_NETCONFIG 0x04
#define TL_MANTEST 0x06
#define TL_VENID_LSB 0x08
#define TL_VENID_MSB 0x09
#define TL_DEVID_LSB 0x0A
#define TL_DEVID_MSB 0x0B
#define TL_REVISION 0x0C
#define TL_SUBCLASS 0x0D
#define TL_MINLAT 0x0E
#define TL_MAXLAT 0x0F
#define TL_AREG0_B5 0x10
#define TL_AREG0_B4 0x11
#define TL_AREG0_B3 0x12
#define TL_AREG0_B2 0x13
#define TL_AREG0_B1 0x14
#define TL_AREG0_B0 0x15
#define TL_AREG1_B5 0x16
#define TL_AREG1_B4 0x17
#define TL_AREG1_B3 0x18
#define TL_AREG1_B2 0x19
#define TL_AREG1_B1 0x1A
#define TL_AREG1_B0 0x1B
#define TL_AREG2_B5 0x1C
#define TL_AREG2_B4 0x1D
#define TL_AREG2_B3 0x1E
#define TL_AREG2_B2 0x1F
#define TL_AREG2_B1 0x20
#define TL_AREG2_B0 0x21
#define TL_AREG3_B5 0x22
#define TL_AREG3_B4 0x23
#define TL_AREG3_B3 0x24
#define TL_AREG3_B2 0x25
#define TL_AREG3_B1 0x26
#define TL_AREG3_B0 0x27
#define TL_HASH1 0x28
#define TL_HASH2 0x2C
#define TL_TXGOODFRAMES 0x30
#define TL_TXUNDERRUN 0x33
#define TL_RXGOODFRAMES 0x34
#define TL_RXOVERRUN 0x37
#define TL_DEFEREDTX 0x38
#define TL_CRCERROR 0x3A
#define TL_CODEERROR 0x3B
#define TL_MULTICOLTX 0x3C
#define TL_SINGLECOLTX 0x3E
#define TL_EXCESSIVECOL 0x40
#define TL_LATECOL 0x41
#define TL_CARRIERLOSS 0x42
#define TL_ACOMMIT 0x43
#define TL_LDREG 0x44
#define TL_BSIZEREG 0x45
#define TL_MAXRX 0x46
/*
* ThunderLAN SIO register bits
*/
#define TL_SIO_MINTEN 0x80
#define TL_SIO_ECLOK 0x40
#define TL_SIO_ETXEN 0x20
#define TL_SIO_EDATA 0x10
#define TL_SIO_NMRST 0x08
#define TL_SIO_MCLK 0x04
#define TL_SIO_MTXEN 0x02
#define TL_SIO_MDATA 0x01
/*
* Thunderlan NETCONFIG bits
*/
#define TL_CFG_RCLKTEST 0x8000
#define TL_CFG_TCLKTEST 0x4000
#define TL_CFG_BITRATE 0x2000
#define TL_CFG_RXCRC 0x1000
#define TL_CFG_PEF 0x0800
#define TL_CFG_ONEFRAG 0x0400
#define TL_CFG_ONECHAN 0x0200
#define TL_CFG_MTEST 0x0100
#define TL_CFG_PHYEN 0x0080
#define TL_CFG_MACSEL6 0x0040
#define TL_CFG_MACSEL5 0x0020
#define TL_CFG_MACSEL4 0x0010
#define TL_CFG_MACSEL3 0x0008
#define TL_CFG_MACSEL2 0x0004
#define TL_CFG_MACSEL1 0x0002
#define TL_CFG_MACSEL0 0x0001
/*
* ThunderLAN NETSTS bits
*/
#define TL_STS_MIRQ 0x80
#define TL_STS_HBEAT 0x40
#define TL_STS_TXSTOP 0x20
#define TL_STS_RXSTOP 0x10
/*
* ThunderLAN NETCMD bits
*/
#define TL_CMD_NRESET 0x80
#define TL_CMD_NWRAP 0x40
#define TL_CMD_CSF 0x20
#define TL_CMD_CAF 0x10
#define TL_CMD_NOBRX 0x08
#define TL_CMD_DUPLEX 0x04
#define TL_CMD_TRFRAM 0x02
#define TL_CMD_TXPACE 0x01
/*
* ThunderLAN NETMASK bits
*/
#define TL_MASK_MASK7 0x80
#define TL_MASK_MASK6 0x40
#define TL_MASK_MASK5 0x20
#define TL_MASK_MASK4 0x10
#define TL_LAST_FRAG 0x80000000
#define TL_CSTAT_UNUSED 0x8000
#define TL_CSTAT_FRAMECMP 0x4000
#define TL_CSTAT_READY 0x3000
#define TL_CSTAT_UNUSED13 0x2000
#define TL_CSTAT_UNUSED12 0x1000
#define TL_CSTAT_EOC 0x0800
#define TL_CSTAT_RXERROR 0x0400
#define TL_CSTAT_PASSCRC 0x0200
#define TL_CSTAT_DPRIO 0x0100
#define TL_FRAME_MASK 0x00FFFFFF
#define tl_tx_goodframes(x) (x.tl_txstat & TL_FRAME_MASK)
#define tl_tx_underrun(x) ((x.tl_txstat & ~TL_FRAME_MASK) >> 24)
#define tl_rx_goodframes(x) (x.tl_rxstat & TL_FRAME_MASK)
#define tl_rx_overrun(x) ((x.tl_rxstat & ~TL_FRAME_MASK) >> 24)
struct tl_stats {
u_int32_t tl_txstat;
u_int32_t tl_rxstat;
u_int16_t tl_deferred;
u_int8_t tl_crc_errors;
u_int8_t tl_code_errors;
u_int16_t tl_tx_multi_collision;
u_int16_t tl_tx_single_collision;
u_int8_t tl_excessive_collision;
u_int8_t tl_late_collision;
u_int8_t tl_carrier_loss;
u_int8_t acommit;
};
/*
* ACOMMIT register bits. These are used only when a bitrate
* PHY is selected ('bitrate' bit in netconfig register is set).
*/
#define TL_AC_MTXER 0x01 /* reserved */
#define TL_AC_MTXD1 0x02 /* 0 == 10baseT 1 == AUI */
#define TL_AC_MTXD2 0x04 /* loopback disable */
#define TL_AC_MTXD3 0x08 /* full duplex disable */
#define TL_AC_TXTHRESH 0xF0
#define TL_AC_TXTHRESH_16LONG 0x00
#define TL_AC_TXTHRESH_32LONG 0x10
#define TL_AC_TXTHRESH_64LONG 0x20
#define TL_AC_TXTHRESH_128LONG 0x30
#define TL_AC_TXTHRESH_256LONG 0x40
#define TL_AC_TXTHRESH_WHOLEPKT 0x50
/*
* PCI burst size register (TL_BSIZEREG).
*/
#define TL_RXBURST 0x0F
#define TL_TXBURST 0xF0
#define TL_RXBURST_4LONG 0x00
#define TL_RXBURST_8LONG 0x01
#define TL_RXBURST_16LONG 0x02
#define TL_RXBURST_32LONG 0x03
#define TL_RXBURST_64LONG 0x04
#define TL_RXBURST_128LONG 0x05
#define TL_TXBURST_4LONG 0x00
#define TL_TXBURST_8LONG 0x10
#define TL_TXBURST_16LONG 0x20
#define TL_TXBURST_32LONG 0x30
#define TL_TXBURST_64LONG 0x40
#define TL_TXBURST_128LONG 0x50
/*
* register space access macros
*/
#define CSR_WRITE_4(sc, reg, val) bus_write_4(sc->tl_res, reg, val)
#define CSR_WRITE_2(sc, reg, val) bus_write_2(sc->tl_res, reg, val)
#define CSR_WRITE_1(sc, reg, val) bus_write_1(sc->tl_res, reg, val)
#define CSR_READ_4(sc, reg) bus_read_4(sc->tl_res, reg)
#define CSR_READ_2(sc, reg) bus_read_2(sc->tl_res, reg)
#define CSR_READ_1(sc, reg) bus_read_1(sc->tl_res, reg)
#define CSR_BARRIER(sc, reg, length, flags) \
bus_barrier(sc->tl_res, reg, length, flags)
#define CMD_PUT(sc, x) CSR_WRITE_4(sc, TL_HOSTCMD, x)
#define CMD_SET(sc, x) \
CSR_WRITE_4(sc, TL_HOSTCMD, CSR_READ_4(sc, TL_HOSTCMD) | (x))
#define CMD_CLR(sc, x) \
CSR_WRITE_4(sc, TL_HOSTCMD, CSR_READ_4(sc, TL_HOSTCMD) & ~(x))
/*
* ThunderLAN adapters typically have a serial EEPROM containing
* configuration information. The main reason we're interested in
* it is because it also contains the adapters's station address.
*
* Access to the EEPROM is a bit goofy since it is a serial device:
* you have to do reads and writes one bit at a time. The state of
* the DATA bit can only change while the CLOCK line is held low.
* Transactions work basically like this:
*
* 1) Send the EEPROM_START sequence to prepare the EEPROM for
* accepting commands. This pulls the clock high, sets
* the data bit to 0, enables transmission to the EEPROM,
* pulls the data bit up to 1, then pulls the clock low.
* The idea is to do a 0 to 1 transition of the data bit
* while the clock pin is held high.
*
* 2) To write a bit to the EEPROM, set the TXENABLE bit, then
* set the EDATA bit to send a 1 or clear it to send a 0.
* Finally, set and then clear ECLOK. Strobing the clock
* transmits the bit. After 8 bits have been written, the
* EEPROM should respond with an ACK, which should be read.
*
* 3) To read a bit from the EEPROM, clear the TXENABLE bit,
* then set ECLOK. The bit can then be read by reading EDATA.
* ECLOCK should then be cleared again. This can be repeated
* 8 times to read a whole byte, after which the
*
* 4) We need to send the address byte to the EEPROM. For this
* we have to send the write control byte to the EEPROM to
* tell it to accept data. The byte is 0xA0. The EEPROM should
* ack this. The address byte can be send after that.
*
* 5) Now we have to tell the EEPROM to send us data. For that we
* have to transmit the read control byte, which is 0xA1. This
* byte should also be acked. We can then read the data bits
* from the EEPROM.
*
* 6) When we're all finished, send the EEPROM_STOP sequence.
*
* Note that we use the ThunderLAN's NetSio register to access the
* EEPROM, however there is an alternate method. There is a PCI NVRAM
* register at PCI offset 0xB4 which can also be used with minor changes.
* The difference is that access to PCI registers via pci_conf_read()
* and pci_conf_write() is done using programmed I/O, which we want to
* avoid.
*/
/*
* Note that EEPROM_START leaves transmission enabled.
*/
#define EEPROM_START \
tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ECLOK); /* Pull clock pin high */\
tl_dio_setbit(sc, TL_NETSIO, TL_SIO_EDATA); /* Set DATA bit to 1 */ \
tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ETXEN); /* Enable xmit to write bit */\
tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_EDATA); /* Pull DATA bit to 0 again */\
tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ECLOK); /* Pull clock low again */
/*
* EEPROM_STOP ends access to the EEPROM and clears the ETXEN bit so
* that no further data can be written to the EEPROM I/O pin.
*/
#define EEPROM_STOP \
tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ETXEN); /* Disable xmit */ \
tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_EDATA); /* Pull DATA to 0 */ \
tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ECLOK); /* Pull clock high */ \
tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ETXEN); /* Enable xmit */ \
tl_dio_setbit(sc, TL_NETSIO, TL_SIO_EDATA); /* Toggle DATA to 1 */ \
tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ETXEN); /* Disable xmit. */ \
tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ECLOK); /* Pull clock low again */
/*
* Microchip Technology 24Cxx EEPROM control bytes
*/
#define EEPROM_CTL_READ 0xA1 /* 0101 0001 */
#define EEPROM_CTL_WRITE 0xA0 /* 0101 0000 */