| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/usie/@/amd64/compile/hs32/modules/usr/src/sys/modules/i2c/controllers/alpm/@/amd64/compile/hs32/modules/usr/src/sys/modules/aout/@/dev/nxge/include/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/usie/@/amd64/compile/hs32/modules/usr/src/sys/modules/i2c/controllers/alpm/@/amd64/compile/hs32/modules/usr/src/sys/modules/aout/@/dev/nxge/include/xgehal-types.h |
/*-
* Copyright (c) 2002-2007 Neterion, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/nxge/include/xgehal-types.h 173139 2007-10-29 14:19:32Z rwatson $
*/
#ifndef XGE_HAL_TYPES_H
#define XGE_HAL_TYPES_H
#include <dev/nxge/include/xge-os-pal.h>
__EXTERN_BEGIN_DECLS
/*
* BIT(loc) - set bit at offset
*/
#define BIT(loc) (0x8000000000000000ULL >> (loc))
/*
* vBIT(val, loc, sz) - set bits at offset
*/
#define vBIT(val, loc, sz) (((u64)(val)) << (64-(loc)-(sz)))
#define vBIT32(val, loc, sz) (((u32)(val)) << (32-(loc)-(sz)))
/*
* bVALx(bits, loc) - Get the value of x bits at location
*/
#define bVAL1(bits, loc) ((((u64)bits) >> (64-(loc+1))) & 0x1)
#define bVAL2(bits, loc) ((((u64)bits) >> (64-(loc+2))) & 0x3)
#define bVAL3(bits, loc) ((((u64)bits) >> (64-(loc+3))) & 0x7)
#define bVAL4(bits, loc) ((((u64)bits) >> (64-(loc+4))) & 0xF)
#define bVAL5(bits, loc) ((((u64)bits) >> (64-(loc+5))) & 0x1F)
#define bVAL6(bits, loc) ((((u64)bits) >> (64-(loc+6))) & 0x3F)
#define bVAL7(bits, loc) ((((u64)bits) >> (64-(loc+7))) & 0x7F)
#define bVAL8(bits, loc) ((((u64)bits) >> (64-(loc+8))) & 0xFF)
#define bVAL12(bits, loc) ((((u64)bits) >> (64-(loc+12))) & 0xFFF)
#define bVAL14(bits, loc) ((((u64)bits) >> (64-(loc+14))) & 0x3FFF)
#define bVAL16(bits, loc) ((((u64)bits) >> (64-(loc+16))) & 0xFFFF)
#define bVAL20(bits, loc) ((((u64)bits) >> (64-(loc+20))) & 0xFFFFF)
#define bVAL22(bits, loc) ((((u64)bits) >> (64-(loc+22))) & 0x3FFFFF)
#define bVAL24(bits, loc) ((((u64)bits) >> (64-(loc+24))) & 0xFFFFFF)
#define bVAL28(bits, loc) ((((u64)bits) >> (64-(loc+28))) & 0xFFFFFFF)
#define bVAL32(bits, loc) ((((u64)bits) >> (64-(loc+32))) & 0xFFFFFFFF)
#define bVAL36(bits, loc) ((((u64)bits) >> (64-(loc+36))) & 0xFFFFFFFFF)
#define bVAL40(bits, loc) ((((u64)bits) >> (64-(loc+40))) & 0xFFFFFFFFFF)
#define bVAL44(bits, loc) ((((u64)bits) >> (64-(loc+44))) & 0xFFFFFFFFFFF)
#define bVAL48(bits, loc) ((((u64)bits) >> (64-(loc+48))) & 0xFFFFFFFFFFFF)
#define bVAL52(bits, loc) ((((u64)bits) >> (64-(loc+52))) & 0xFFFFFFFFFFFFF)
#define bVAL56(bits, loc) ((((u64)bits) >> (64-(loc+56))) & 0xFFFFFFFFFFFFFF)
#define bVAL60(bits, loc) ((((u64)bits) >> (64-(loc+60))) & 0xFFFFFFFFFFFFFFF)
#define XGE_HAL_BASE_INF 100
#define XGE_HAL_BASE_ERR 200
#define XGE_HAL_BASE_BADCFG 300
#define XGE_HAL_ALL_FOXES 0xFFFFFFFFFFFFFFFFULL
/**
* enum xge_hal_status_e - HAL return codes.
* @XGE_HAL_OK: Success.
* @XGE_HAL_FAIL: Failure.
* @XGE_HAL_COMPLETIONS_REMAIN: There are more completions on a channel.
* (specific to polling mode completion processing).
* @XGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS: No more completed
* descriptors. See xge_hal_fifo_dtr_next_completed().
* @XGE_HAL_INF_OUT_OF_DESCRIPTORS: Out of descriptors. Channel
* descriptors
* are reserved (via xge_hal_fifo_dtr_reserve(),
* xge_hal_fifo_dtr_reserve())
* and not yet freed (via xge_hal_fifo_dtr_free(),
* xge_hal_ring_dtr_free()).
* @XGE_HAL_INF_CHANNEL_IS_NOT_READY: Channel is not ready for
* operation.
* @XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING: Indicates that host needs to
* poll until PIO is executed.
* @XGE_HAL_INF_STATS_IS_NOT_READY: Cannot retrieve statistics because
* HAL and/or device is not yet initialized.
* @XGE_HAL_INF_NO_MORE_FREED_DESCRIPTORS: No descriptors left to
* reserve. Internal use only.
* @XGE_HAL_INF_IRQ_POLLING_CONTINUE: Returned by the ULD channel
* callback when instructed to exit descriptor processing loop
* prematurely. Typical usage: polling mode of processing completed
* descriptors.
* Upon getting LRO_ISED, ll driver shall
* 1) initialise lro struct with mbuf if sg_num == 1.
* 2) else it will update m_data_ptr_of_mbuf to tcp pointer and
* append the new mbuf to the tail of mbuf chain in lro struct.
*
* @XGE_HAL_INF_LRO_BEGIN: Returned by ULD LRO module, when new LRO is
* being initiated.
* @XGE_HAL_INF_LRO_CONT: Returned by ULD LRO module, when new frame
* is appended at the end of existing LRO.
* @XGE_HAL_INF_LRO_UNCAPABLE: Returned by ULD LRO module, when new
* frame is not LRO capable.
* @XGE_HAL_INF_LRO_END_1: Returned by ULD LRO module, when new frame
* triggers LRO flush.
* @XGE_HAL_INF_LRO_END_2: Returned by ULD LRO module, when new
* frame triggers LRO flush. Lro frame should be flushed first then
* new frame should be flushed next.
* @XGE_HAL_INF_LRO_END_3: Returned by ULD LRO module, when new
* frame triggers close of current LRO session and opening of new LRO session
* with the frame.
* @XGE_HAL_INF_LRO_SESSIONS_XCDED: Returned by ULD LRO module, when no
* more LRO sessions can be added.
* @XGE_HAL_INF_NOT_ENOUGH_HW_CQES: TBD
* @XGE_HAL_ERR_DRIVER_NOT_INITIALIZED: HAL is not initialized.
* @XGE_HAL_ERR_OUT_OF_MEMORY: Out of memory (example, when and
* allocating descriptors).
* @XGE_HAL_ERR_CHANNEL_NOT_FOUND: xge_hal_channel_open will return this
* error if corresponding channel is not configured.
* @XGE_HAL_ERR_WRONG_IRQ: Returned by HAL's ISR when the latter is
* invoked not because of the Xframe-generated interrupt.
* @XGE_HAL_ERR_OUT_OF_MAC_ADDRESSES: Returned when user tries to
* configure more than XGE_HAL_MAX_MAC_ADDRESSES mac addresses.
* @XGE_HAL_ERR_BAD_DEVICE_ID: Unknown device PCI ID.
* @XGE_HAL_ERR_OUT_ALIGNED_FRAGS: Too many unaligned fragments
* in a scatter-gather list.
* @XGE_HAL_ERR_DEVICE_NOT_INITIALIZED: Device is not initialized.
* Typically means wrong sequence of API calls.
* @XGE_HAL_ERR_SWAPPER_CTRL: Error during device initialization: failed
* to set Xframe byte swapper in accordnace with the host
* endian-ness.
* @XGE_HAL_ERR_DEVICE_IS_NOT_QUIESCENT: Failed to restore the device to
* a "quiescent" state.
* @XGE_HAL_ERR_INVALID_MTU_SIZE: Returned when MTU size specified by
* caller is not in the (64, 9600) range.
* @XGE_HAL_ERR_OUT_OF_MAPPING: Failed to map DMA-able memory.
* @XGE_HAL_ERR_BAD_SUBSYSTEM_ID: Bad PCI subsystem ID. (Currently we
* check for zero/non-zero only.)
* @XGE_HAL_ERR_INVALID_BAR_ID: Invalid BAR ID. Xframe supports two Base
* Address Register Spaces: BAR0 (id=0) and BAR1 (id=1).
* @XGE_HAL_ERR_INVALID_OFFSET: Invalid offset. Example, attempt to read
* register value (with offset) outside of the BAR0 space.
* @XGE_HAL_ERR_INVALID_DEVICE: Invalid device. The HAL device handle
* (passed by ULD) is invalid.
* @XGE_HAL_ERR_OUT_OF_SPACE: Out-of-provided-buffer-space. Returned by
* management "get" routines when the retrieved information does
* not fit into the provided buffer.
* @XGE_HAL_ERR_INVALID_VALUE_BIT_SIZE: Invalid bit size.
* @XGE_HAL_ERR_VERSION_CONFLICT: Upper-layer driver and HAL (versions)
* are not compatible.
* @XGE_HAL_ERR_INVALID_MAC_ADDRESS: Invalid MAC address.
* @XGE_HAL_ERR_SPDM_NOT_ENABLED: SPDM support is not enabled.
* @XGE_HAL_ERR_SPDM_TABLE_FULL: SPDM table is full.
* @XGE_HAL_ERR_SPDM_INVALID_ENTRY: Invalid SPDM entry.
* @XGE_HAL_ERR_SPDM_ENTRY_NOT_FOUND: Unable to locate the entry in the
* SPDM table.
* @XGE_HAL_ERR_SPDM_TABLE_DATA_INCONSISTENT: Local SPDM table is not in
* synch ith the actual one.
* @XGE_HAL_ERR_INVALID_PCI_INFO: Invalid or unrecognized PCI frequency,
* and or width, and or mode (Xframe-II only, see UG on PCI_INFO register).
* @XGE_HAL_ERR_CRITICAL: Critical error. Returned by HAL APIs
* (including xge_hal_device_handle_tcode()) on: ECC, parity, SERR.
* Also returned when PIO read does not go through ("all-foxes")
* because of "slot-freeze".
* @XGE_HAL_ERR_RESET_FAILED: Failed to soft-reset the device.
* Returned by xge_hal_device_reset(). One circumstance when it could
* happen: slot freeze by the system (see @XGE_HAL_ERR_CRITICAL).
* @XGE_HAL_ERR_TOO_MANY: This error is returned if there were laready
* maximum number of sessions or queues allocated
* @XGE_HAL_ERR_PKT_DROP: TBD
* @XGE_HAL_BADCFG_TX_URANGE_A: Invalid Tx link utilization range A. See
* the structure xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_TX_UFC_A: Invalid frame count for Tx link utilization
* range A. See the structure xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_TX_URANGE_B: Invalid Tx link utilization range B. See
* the structure xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_TX_UFC_B: Invalid frame count for Tx link utilization
* range B. See the strucuture xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_TX_URANGE_C: Invalid Tx link utilization range C. See
* the structure xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_TX_UFC_C: Invalid frame count for Tx link utilization
* range C. See the structure xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_TX_UFC_D: Invalid frame count for Tx link utilization
* range D. See the structure xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_TX_TIMER_VAL: Invalid Tx timer value. See the
* structure xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_TX_TIMER_CI_EN: Invalid Tx timer continuous interrupt
* enable. See the structure xge_hal_tti_config_t{} for valid values.
* @XGE_HAL_BADCFG_RX_URANGE_A: Invalid Rx link utilization range A. See
* the structure xge_hal_rti_config_t{} for valid values.
* @XGE_HAL_BADCFG_RX_UFC_A: Invalid frame count for Rx link utilization
* range A. See the structure xge_hal_rti_config_t{} for valid values.
* @XGE_HAL_BADCFG_RX_URANGE_B: Invalid Rx link utilization range B. See
* the structure xge_hal_rti_config_t{} for valid values.
* @XGE_HAL_BADCFG_RX_UFC_B: Invalid frame count for Rx link utilization
* range B. See the structure xge_hal_rti_config_t{} for valid values.
* @XGE_HAL_BADCFG_RX_URANGE_C: Invalid Rx link utilization range C. See
* the structure xge_hal_rti_config_t{} for valid values.
* @XGE_HAL_BADCFG_RX_UFC_C: Invalid frame count for Rx link utilization
* range C. See the structure xge_hal_rti_config_t{} for valid values.
* @XGE_HAL_BADCFG_RX_UFC_D: Invalid frame count for Rx link utilization
* range D. See the structure xge_hal_rti_config_t{} for valid values.
* @XGE_HAL_BADCFG_RX_TIMER_VAL: Invalid Rx timer value. See the
* structure xge_hal_rti_config_t{} for valid values.
* @XGE_HAL_BADCFG_FIFO_QUEUE_INITIAL_LENGTH: Invalid initial fifo queue
* length. See the structure xge_hal_fifo_queue_t for valid values.
* @XGE_HAL_BADCFG_FIFO_QUEUE_MAX_LENGTH: Invalid fifo queue max length.
* See the structure xge_hal_fifo_queue_t for valid values.
* @XGE_HAL_BADCFG_FIFO_QUEUE_INTR: Invalid fifo queue interrupt mode.
* See the structure xge_hal_fifo_queue_t for valid values.
* @XGE_HAL_BADCFG_RING_QUEUE_INITIAL_BLOCKS: Invalid Initial number of
* RxD blocks for the ring. See the structure xge_hal_ring_queue_t for
* valid values.
* @XGE_HAL_BADCFG_RING_QUEUE_MAX_BLOCKS: Invalid maximum number of RxD
* blocks for the ring. See the structure xge_hal_ring_queue_t for
* valid values.
* @XGE_HAL_BADCFG_RING_QUEUE_BUFFER_MODE: Invalid ring buffer mode. See
* the structure xge_hal_ring_queue_t for valid values.
* @XGE_HAL_BADCFG_RING_QUEUE_SIZE: Invalid ring queue size. See the
* structure xge_hal_ring_queue_t for valid values.
* @XGE_HAL_BADCFG_BACKOFF_INTERVAL_US: Invalid backoff timer interval
* for the ring. See the structure xge_hal_ring_queue_t for valid values.
* @XGE_HAL_BADCFG_MAX_FRM_LEN: Invalid ring max frame length. See the
* structure xge_hal_ring_queue_t for valid values.
* @XGE_HAL_BADCFG_RING_PRIORITY: Invalid ring priority. See the
* structure xge_hal_ring_queue_t for valid values.
* @XGE_HAL_BADCFG_TMAC_UTIL_PERIOD: Invalid tmac util period. See the
* structure xge_hal_mac_config_t{} for valid values.
* @XGE_HAL_BADCFG_RMAC_UTIL_PERIOD: Invalid rmac util period. See the
* structure xge_hal_mac_config_t{} for valid values.
* @XGE_HAL_BADCFG_RMAC_BCAST_EN: Invalid rmac brodcast enable. See the
* structure xge_hal_mac_config_t{} for valid values.
* @XGE_HAL_BADCFG_RMAC_HIGH_PTIME: Invalid rmac pause time. See the
* structure xge_hal_mac_config_t{} for valid values.
* @XGE_HAL_BADCFG_MC_PAUSE_THRESHOLD_Q0Q3: Invalid threshold for pause
* frame generation for queues 0 through 3. See the structure
* xge_hal_mac_config_t{} for valid values.
* @XGE_HAL_BADCFG_MC_PAUSE_THRESHOLD_Q4Q7:Invalid threshold for pause
* frame generation for queues 4 through 7. See the structure
* xge_hal_mac_config_t{} for valid values.
* @XGE_HAL_BADCFG_FIFO_FRAGS: Invalid fifo max fragments length. See
* the structure xge_hal_fifo_config_t{} for valid values.
* @XGE_HAL_BADCFG_FIFO_RESERVE_THRESHOLD: Invalid fifo reserve
* threshold. See the structure xge_hal_fifo_config_t{} for valid values.
* @XGE_HAL_BADCFG_FIFO_MEMBLOCK_SIZE: Invalid fifo descriptors memblock
* size. See the structure xge_hal_fifo_config_t{} for valid values.
* @XGE_HAL_BADCFG_RING_MEMBLOCK_SIZE: Invalid ring descriptors memblock
* size. See the structure xge_hal_ring_config_t{} for valid values.
* @XGE_HAL_BADCFG_MAX_MTU: Invalid max mtu for the device. See the
* structure xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_ISR_POLLING_CNT: Invalid isr polling count. See the
* structure xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_LATENCY_TIMER: Invalid Latency timer. See the
* structure xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_MAX_SPLITS_TRANS: Invalid maximum number of pci-x
* split transactions. See the structure xge_hal_device_config_t{} for valid
* values.
* @XGE_HAL_BADCFG_MMRB_COUNT: Invalid mmrb count. See the structure
* xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_SHARED_SPLITS: Invalid number of outstanding split
* transactions that is shared by Tx and Rx requests. See the structure
* xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_STATS_REFRESH_TIME: Invalid time interval for
* automatic statistics transfer to the host. See the structure
* xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_PCI_FREQ_MHERZ: Invalid pci clock frequency. See the
* structure xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_PCI_MODE: Invalid pci mode. See the structure
* xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_INTR_MODE: Invalid interrupt mode. See the structure
* xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_SCHED_TIMER_US: Invalid scheduled timer interval to
* generate interrupt. See the structure xge_hal_device_config_t{}
* for valid values.
* @XGE_HAL_BADCFG_SCHED_TIMER_ON_SHOT: Invalid scheduled timer one
* shot. See the structure xge_hal_device_config_t{} for valid values.
* @XGE_HAL_BADCFG_QUEUE_SIZE_INITIAL: Invalid driver queue initial
* size. See the structure xge_hal_driver_config_t{} for valid values.
* @XGE_HAL_BADCFG_QUEUE_SIZE_MAX: Invalid driver queue max size. See
* the structure xge_hal_driver_config_t{} for valid values.
* @XGE_HAL_BADCFG_RING_RTH_EN: Invalid value of RTH-enable. See
* the structure xge_hal_ring_queue_t for valid values.
* @XGE_HAL_BADCFG_RING_INDICATE_MAX_PKTS: Invalid value configured for
* indicate_max_pkts variable.
* @XGE_HAL_BADCFG_TX_TIMER_AC_EN: Invalid value for Tx timer
* auto-cancel. See xge_hal_tti_config_t{}.
* @XGE_HAL_BADCFG_RX_TIMER_AC_EN: Invalid value for Rx timer
* auto-cancel. See xge_hal_rti_config_t{}.
* @XGE_HAL_BADCFG_RXUFCA_INTR_THRES: TODO
* @XGE_HAL_BADCFG_RXUFCA_LO_LIM: TODO
* @XGE_HAL_BADCFG_RXUFCA_HI_LIM: TODO
* @XGE_HAL_BADCFG_RXUFCA_LBOLT_PERIOD: TODO
* @XGE_HAL_BADCFG_TRACEBUF_SIZE: Bad configuration: the size of the circular
* (in memory) trace buffer either too large or too small. See the
* the corresponding header file or README for the acceptable range.
* @XGE_HAL_BADCFG_LINK_VALID_CNT: Bad configuration: the link-valid
* counter cannot have the specified value. Note that the link-valid
* counting is done only at device-open time, to determine with the
* specified certainty that the link is up. See the
* the corresponding header file or README for the acceptable range.
* See also @XGE_HAL_BADCFG_LINK_RETRY_CNT.
* @XGE_HAL_BADCFG_LINK_RETRY_CNT: Bad configuration: the specified
* link-up retry count is out of the valid range. Note that the link-up
* retry counting is done only at device-open time.
* See also xge_hal_device_config_t{}.
* @XGE_HAL_BADCFG_LINK_STABILITY_PERIOD: Invalid link stability period.
* @XGE_HAL_BADCFG_DEVICE_POLL_MILLIS: Invalid device poll interval.
* @XGE_HAL_BADCFG_RMAC_PAUSE_GEN_EN: TBD
* @XGE_HAL_BADCFG_RMAC_PAUSE_RCV_EN: TBD
* @XGE_HAL_BADCFG_MEDIA: TBD
* @XGE_HAL_BADCFG_NO_ISR_EVENTS: TBD
* See the structure xge_hal_device_config_t{} for valid values.
* @XGE_HAL_EOF_TRACE_BUF: End of the circular (in memory) trace buffer.
* Returned by xge_hal_mgmt_trace_read(), when user tries to read the trace
* past the buffer limits. Used to enable user to load the trace in two
* or more reads.
* @XGE_HAL_BADCFG_RING_RTS_MAC_EN: Invalid value of RTS_MAC_EN enable. See
* the structure xge_hal_ring_queue_t for valid values.
* @XGE_HAL_BADCFG_LRO_SG_SIZE : Invalid value of LRO scatter gatter size.
* See the structure xge_hal_device_config_t for valid values.
* @XGE_HAL_BADCFG_LRO_FRM_LEN : Invalid value of LRO frame length.
* See the structure xge_hal_device_config_t for valid values.
* @XGE_HAL_BADCFG_WQE_NUM_ODS: TBD
* @XGE_HAL_BADCFG_BIMODAL_INTR: Invalid value to configure bimodal interrupts
* Enumerates status and error codes returned by HAL public
* API functions.
* @XGE_HAL_BADCFG_BIMODAL_TIMER_LO_US: TBD
* @XGE_HAL_BADCFG_BIMODAL_TIMER_HI_US: TBD
* @XGE_HAL_BADCFG_BIMODAL_XENA_NOT_ALLOWED: TBD
* @XGE_HAL_BADCFG_RTS_QOS_EN: TBD
* @XGE_HAL_BADCFG_FIFO_QUEUE_INTR_VECTOR: TBD
* @XGE_HAL_BADCFG_RING_QUEUE_INTR_VECTOR: TBD
* @XGE_HAL_BADCFG_RTS_PORT_EN: TBD
* @XGE_HAL_BADCFG_RING_RTS_PORT_EN: TBD
*
*/
typedef enum xge_hal_status_e {
XGE_HAL_OK = 0,
XGE_HAL_FAIL = 1,
XGE_HAL_COMPLETIONS_REMAIN = 2,
XGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS = XGE_HAL_BASE_INF + 1,
XGE_HAL_INF_OUT_OF_DESCRIPTORS = XGE_HAL_BASE_INF + 2,
XGE_HAL_INF_CHANNEL_IS_NOT_READY = XGE_HAL_BASE_INF + 3,
XGE_HAL_INF_MEM_STROBE_CMD_EXECUTING = XGE_HAL_BASE_INF + 4,
XGE_HAL_INF_STATS_IS_NOT_READY = XGE_HAL_BASE_INF + 5,
XGE_HAL_INF_NO_MORE_FREED_DESCRIPTORS = XGE_HAL_BASE_INF + 6,
XGE_HAL_INF_IRQ_POLLING_CONTINUE = XGE_HAL_BASE_INF + 7,
XGE_HAL_INF_LRO_BEGIN = XGE_HAL_BASE_INF + 8,
XGE_HAL_INF_LRO_CONT = XGE_HAL_BASE_INF + 9,
XGE_HAL_INF_LRO_UNCAPABLE = XGE_HAL_BASE_INF + 10,
XGE_HAL_INF_LRO_END_1 = XGE_HAL_BASE_INF + 11,
XGE_HAL_INF_LRO_END_2 = XGE_HAL_BASE_INF + 12,
XGE_HAL_INF_LRO_END_3 = XGE_HAL_BASE_INF + 13,
XGE_HAL_INF_LRO_SESSIONS_XCDED = XGE_HAL_BASE_INF + 14,
XGE_HAL_INF_NOT_ENOUGH_HW_CQES = XGE_HAL_BASE_INF + 15,
XGE_HAL_ERR_DRIVER_NOT_INITIALIZED = XGE_HAL_BASE_ERR + 1,
XGE_HAL_ERR_OUT_OF_MEMORY = XGE_HAL_BASE_ERR + 4,
XGE_HAL_ERR_CHANNEL_NOT_FOUND = XGE_HAL_BASE_ERR + 5,
XGE_HAL_ERR_WRONG_IRQ = XGE_HAL_BASE_ERR + 6,
XGE_HAL_ERR_OUT_OF_MAC_ADDRESSES = XGE_HAL_BASE_ERR + 7,
XGE_HAL_ERR_SWAPPER_CTRL = XGE_HAL_BASE_ERR + 8,
XGE_HAL_ERR_DEVICE_IS_NOT_QUIESCENT = XGE_HAL_BASE_ERR + 9,
XGE_HAL_ERR_INVALID_MTU_SIZE = XGE_HAL_BASE_ERR + 10,
XGE_HAL_ERR_OUT_OF_MAPPING = XGE_HAL_BASE_ERR + 11,
XGE_HAL_ERR_BAD_SUBSYSTEM_ID = XGE_HAL_BASE_ERR + 12,
XGE_HAL_ERR_INVALID_BAR_ID = XGE_HAL_BASE_ERR + 13,
XGE_HAL_ERR_INVALID_OFFSET = XGE_HAL_BASE_ERR + 14,
XGE_HAL_ERR_INVALID_DEVICE = XGE_HAL_BASE_ERR + 15,
XGE_HAL_ERR_OUT_OF_SPACE = XGE_HAL_BASE_ERR + 16,
XGE_HAL_ERR_INVALID_VALUE_BIT_SIZE = XGE_HAL_BASE_ERR + 17,
XGE_HAL_ERR_VERSION_CONFLICT = XGE_HAL_BASE_ERR + 18,
XGE_HAL_ERR_INVALID_MAC_ADDRESS = XGE_HAL_BASE_ERR + 19,
XGE_HAL_ERR_BAD_DEVICE_ID = XGE_HAL_BASE_ERR + 20,
XGE_HAL_ERR_OUT_ALIGNED_FRAGS = XGE_HAL_BASE_ERR + 21,
XGE_HAL_ERR_DEVICE_NOT_INITIALIZED = XGE_HAL_BASE_ERR + 22,
XGE_HAL_ERR_SPDM_NOT_ENABLED = XGE_HAL_BASE_ERR + 23,
XGE_HAL_ERR_SPDM_TABLE_FULL = XGE_HAL_BASE_ERR + 24,
XGE_HAL_ERR_SPDM_INVALID_ENTRY = XGE_HAL_BASE_ERR + 25,
XGE_HAL_ERR_SPDM_ENTRY_NOT_FOUND = XGE_HAL_BASE_ERR + 26,
XGE_HAL_ERR_SPDM_TABLE_DATA_INCONSISTENT= XGE_HAL_BASE_ERR + 27,
XGE_HAL_ERR_INVALID_PCI_INFO = XGE_HAL_BASE_ERR + 28,
XGE_HAL_ERR_CRITICAL = XGE_HAL_BASE_ERR + 29,
XGE_HAL_ERR_RESET_FAILED = XGE_HAL_BASE_ERR + 30,
XGE_HAL_ERR_TOO_MANY = XGE_HAL_BASE_ERR + 32,
XGE_HAL_ERR_PKT_DROP = XGE_HAL_BASE_ERR + 33,
XGE_HAL_BADCFG_TX_URANGE_A = XGE_HAL_BASE_BADCFG + 1,
XGE_HAL_BADCFG_TX_UFC_A = XGE_HAL_BASE_BADCFG + 2,
XGE_HAL_BADCFG_TX_URANGE_B = XGE_HAL_BASE_BADCFG + 3,
XGE_HAL_BADCFG_TX_UFC_B = XGE_HAL_BASE_BADCFG + 4,
XGE_HAL_BADCFG_TX_URANGE_C = XGE_HAL_BASE_BADCFG + 5,
XGE_HAL_BADCFG_TX_UFC_C = XGE_HAL_BASE_BADCFG + 6,
XGE_HAL_BADCFG_TX_UFC_D = XGE_HAL_BASE_BADCFG + 8,
XGE_HAL_BADCFG_TX_TIMER_VAL = XGE_HAL_BASE_BADCFG + 9,
XGE_HAL_BADCFG_TX_TIMER_CI_EN = XGE_HAL_BASE_BADCFG + 10,
XGE_HAL_BADCFG_RX_URANGE_A = XGE_HAL_BASE_BADCFG + 11,
XGE_HAL_BADCFG_RX_UFC_A = XGE_HAL_BASE_BADCFG + 12,
XGE_HAL_BADCFG_RX_URANGE_B = XGE_HAL_BASE_BADCFG + 13,
XGE_HAL_BADCFG_RX_UFC_B = XGE_HAL_BASE_BADCFG + 14,
XGE_HAL_BADCFG_RX_URANGE_C = XGE_HAL_BASE_BADCFG + 15,
XGE_HAL_BADCFG_RX_UFC_C = XGE_HAL_BASE_BADCFG + 16,
XGE_HAL_BADCFG_RX_UFC_D = XGE_HAL_BASE_BADCFG + 17,
XGE_HAL_BADCFG_RX_TIMER_VAL = XGE_HAL_BASE_BADCFG + 18,
XGE_HAL_BADCFG_FIFO_QUEUE_INITIAL_LENGTH= XGE_HAL_BASE_BADCFG + 19,
XGE_HAL_BADCFG_FIFO_QUEUE_MAX_LENGTH = XGE_HAL_BASE_BADCFG + 20,
XGE_HAL_BADCFG_FIFO_QUEUE_INTR = XGE_HAL_BASE_BADCFG + 21,
XGE_HAL_BADCFG_RING_QUEUE_INITIAL_BLOCKS=XGE_HAL_BASE_BADCFG + 22,
XGE_HAL_BADCFG_RING_QUEUE_MAX_BLOCKS = XGE_HAL_BASE_BADCFG + 23,
XGE_HAL_BADCFG_RING_QUEUE_BUFFER_MODE = XGE_HAL_BASE_BADCFG + 24,
XGE_HAL_BADCFG_RING_QUEUE_SIZE = XGE_HAL_BASE_BADCFG + 25,
XGE_HAL_BADCFG_BACKOFF_INTERVAL_US = XGE_HAL_BASE_BADCFG + 26,
XGE_HAL_BADCFG_MAX_FRM_LEN = XGE_HAL_BASE_BADCFG + 27,
XGE_HAL_BADCFG_RING_PRIORITY = XGE_HAL_BASE_BADCFG + 28,
XGE_HAL_BADCFG_TMAC_UTIL_PERIOD = XGE_HAL_BASE_BADCFG + 29,
XGE_HAL_BADCFG_RMAC_UTIL_PERIOD = XGE_HAL_BASE_BADCFG + 30,
XGE_HAL_BADCFG_RMAC_BCAST_EN = XGE_HAL_BASE_BADCFG + 31,
XGE_HAL_BADCFG_RMAC_HIGH_PTIME = XGE_HAL_BASE_BADCFG + 32,
XGE_HAL_BADCFG_MC_PAUSE_THRESHOLD_Q0Q3 = XGE_HAL_BASE_BADCFG +33,
XGE_HAL_BADCFG_MC_PAUSE_THRESHOLD_Q4Q7 = XGE_HAL_BASE_BADCFG + 34,
XGE_HAL_BADCFG_FIFO_FRAGS = XGE_HAL_BASE_BADCFG + 35,
XGE_HAL_BADCFG_FIFO_RESERVE_THRESHOLD = XGE_HAL_BASE_BADCFG + 37,
XGE_HAL_BADCFG_FIFO_MEMBLOCK_SIZE = XGE_HAL_BASE_BADCFG + 38,
XGE_HAL_BADCFG_RING_MEMBLOCK_SIZE = XGE_HAL_BASE_BADCFG + 39,
XGE_HAL_BADCFG_MAX_MTU = XGE_HAL_BASE_BADCFG + 40,
XGE_HAL_BADCFG_ISR_POLLING_CNT = XGE_HAL_BASE_BADCFG + 41,
XGE_HAL_BADCFG_LATENCY_TIMER = XGE_HAL_BASE_BADCFG + 42,
XGE_HAL_BADCFG_MAX_SPLITS_TRANS = XGE_HAL_BASE_BADCFG + 43,
XGE_HAL_BADCFG_MMRB_COUNT = XGE_HAL_BASE_BADCFG + 44,
XGE_HAL_BADCFG_SHARED_SPLITS = XGE_HAL_BASE_BADCFG + 45,
XGE_HAL_BADCFG_STATS_REFRESH_TIME = XGE_HAL_BASE_BADCFG + 46,
XGE_HAL_BADCFG_PCI_FREQ_MHERZ = XGE_HAL_BASE_BADCFG + 47,
XGE_HAL_BADCFG_PCI_MODE = XGE_HAL_BASE_BADCFG + 48,
XGE_HAL_BADCFG_INTR_MODE = XGE_HAL_BASE_BADCFG + 49,
XGE_HAL_BADCFG_SCHED_TIMER_US = XGE_HAL_BASE_BADCFG + 50,
XGE_HAL_BADCFG_SCHED_TIMER_ON_SHOT = XGE_HAL_BASE_BADCFG + 51,
XGE_HAL_BADCFG_QUEUE_SIZE_INITIAL = XGE_HAL_BASE_BADCFG + 52,
XGE_HAL_BADCFG_QUEUE_SIZE_MAX = XGE_HAL_BASE_BADCFG + 53,
XGE_HAL_BADCFG_RING_RTH_EN = XGE_HAL_BASE_BADCFG + 54,
XGE_HAL_BADCFG_RING_INDICATE_MAX_PKTS = XGE_HAL_BASE_BADCFG + 55,
XGE_HAL_BADCFG_TX_TIMER_AC_EN = XGE_HAL_BASE_BADCFG + 56,
XGE_HAL_BADCFG_RX_TIMER_AC_EN = XGE_HAL_BASE_BADCFG + 57,
XGE_HAL_BADCFG_RXUFCA_INTR_THRES = XGE_HAL_BASE_BADCFG + 58,
XGE_HAL_BADCFG_RXUFCA_LO_LIM = XGE_HAL_BASE_BADCFG + 59,
XGE_HAL_BADCFG_RXUFCA_HI_LIM = XGE_HAL_BASE_BADCFG + 60,
XGE_HAL_BADCFG_RXUFCA_LBOLT_PERIOD = XGE_HAL_BASE_BADCFG + 61,
XGE_HAL_BADCFG_TRACEBUF_SIZE = XGE_HAL_BASE_BADCFG + 62,
XGE_HAL_BADCFG_LINK_VALID_CNT = XGE_HAL_BASE_BADCFG + 63,
XGE_HAL_BADCFG_LINK_RETRY_CNT = XGE_HAL_BASE_BADCFG + 64,
XGE_HAL_BADCFG_LINK_STABILITY_PERIOD = XGE_HAL_BASE_BADCFG + 65,
XGE_HAL_BADCFG_DEVICE_POLL_MILLIS = XGE_HAL_BASE_BADCFG + 66,
XGE_HAL_BADCFG_RMAC_PAUSE_GEN_EN = XGE_HAL_BASE_BADCFG + 67,
XGE_HAL_BADCFG_RMAC_PAUSE_RCV_EN = XGE_HAL_BASE_BADCFG + 68,
XGE_HAL_BADCFG_MEDIA = XGE_HAL_BASE_BADCFG + 69,
XGE_HAL_BADCFG_NO_ISR_EVENTS = XGE_HAL_BASE_BADCFG + 70,
XGE_HAL_BADCFG_RING_RTS_MAC_EN = XGE_HAL_BASE_BADCFG + 71,
XGE_HAL_BADCFG_LRO_SG_SIZE = XGE_HAL_BASE_BADCFG + 72,
XGE_HAL_BADCFG_LRO_FRM_LEN = XGE_HAL_BASE_BADCFG + 73,
XGE_HAL_BADCFG_WQE_NUM_ODS = XGE_HAL_BASE_BADCFG + 74,
XGE_HAL_BADCFG_BIMODAL_INTR = XGE_HAL_BASE_BADCFG + 75,
XGE_HAL_BADCFG_BIMODAL_TIMER_LO_US = XGE_HAL_BASE_BADCFG + 76,
XGE_HAL_BADCFG_BIMODAL_TIMER_HI_US = XGE_HAL_BASE_BADCFG + 77,
XGE_HAL_BADCFG_BIMODAL_XENA_NOT_ALLOWED = XGE_HAL_BASE_BADCFG + 78,
XGE_HAL_BADCFG_RTS_QOS_EN = XGE_HAL_BASE_BADCFG + 79,
XGE_HAL_BADCFG_FIFO_QUEUE_INTR_VECTOR = XGE_HAL_BASE_BADCFG + 80,
XGE_HAL_BADCFG_RING_QUEUE_INTR_VECTOR = XGE_HAL_BASE_BADCFG + 81,
XGE_HAL_BADCFG_RTS_PORT_EN = XGE_HAL_BASE_BADCFG + 82,
XGE_HAL_BADCFG_RING_RTS_PORT_EN = XGE_HAL_BASE_BADCFG + 83,
XGE_HAL_BADCFG_TRACEBUF_TIMESTAMP = XGE_HAL_BASE_BADCFG + 84,
XGE_HAL_EOF_TRACE_BUF = -1
} xge_hal_status_e;
#define XGE_HAL_ETH_ALEN 6
typedef u8 macaddr_t[XGE_HAL_ETH_ALEN];
#define XGE_HAL_PCI_XFRAME_CONFIG_SPACE_SIZE 0x100
/* frames sizes */
#define XGE_HAL_HEADER_ETHERNET_II_802_3_SIZE 14
#define XGE_HAL_HEADER_802_2_SIZE 3
#define XGE_HAL_HEADER_SNAP_SIZE 5
#define XGE_HAL_HEADER_VLAN_SIZE 4
#define XGE_HAL_MAC_HEADER_MAX_SIZE \
(XGE_HAL_HEADER_ETHERNET_II_802_3_SIZE + \
XGE_HAL_HEADER_802_2_SIZE + \
XGE_HAL_HEADER_SNAP_SIZE)
#define XGE_HAL_TCPIP_HEADER_MAX_SIZE (64 + 64)
/* 32bit alignments */
#define XGE_HAL_HEADER_ETHERNET_II_802_3_ALIGN 2
#define XGE_HAL_HEADER_802_2_SNAP_ALIGN 2
#define XGE_HAL_HEADER_802_2_ALIGN 3
#define XGE_HAL_HEADER_SNAP_ALIGN 1
#define XGE_HAL_L3_CKSUM_OK 0xFFFF
#define XGE_HAL_L4_CKSUM_OK 0xFFFF
#define XGE_HAL_MIN_MTU 46
#define XGE_HAL_MAX_MTU 9600
#define XGE_HAL_DEFAULT_MTU 1500
#define XGE_HAL_SEGEMENT_OFFLOAD_MAX_SIZE 81920
#define XGE_HAL_PCISIZE_XENA 26 /* multiples of dword */
#define XGE_HAL_PCISIZE_HERC 64 /* multiples of dword */
#define XGE_HAL_MAX_MSIX_MESSAGES 64
#define XGE_HAL_MAX_MSIX_MESSAGES_WITH_ADDR XGE_HAL_MAX_MSIX_MESSAGES * 2
/* Highest level interrupt blocks */
#define XGE_HAL_TX_PIC_INTR (0x0001<<0)
#define XGE_HAL_TX_DMA_INTR (0x0001<<1)
#define XGE_HAL_TX_MAC_INTR (0x0001<<2)
#define XGE_HAL_TX_XGXS_INTR (0x0001<<3)
#define XGE_HAL_TX_TRAFFIC_INTR (0x0001<<4)
#define XGE_HAL_RX_PIC_INTR (0x0001<<5)
#define XGE_HAL_RX_DMA_INTR (0x0001<<6)
#define XGE_HAL_RX_MAC_INTR (0x0001<<7)
#define XGE_HAL_RX_XGXS_INTR (0x0001<<8)
#define XGE_HAL_RX_TRAFFIC_INTR (0x0001<<9)
#define XGE_HAL_MC_INTR (0x0001<<10)
#define XGE_HAL_SCHED_INTR (0x0001<<11)
#define XGE_HAL_ALL_INTRS (XGE_HAL_TX_PIC_INTR | \
XGE_HAL_TX_DMA_INTR | \
XGE_HAL_TX_MAC_INTR | \
XGE_HAL_TX_XGXS_INTR | \
XGE_HAL_TX_TRAFFIC_INTR | \
XGE_HAL_RX_PIC_INTR | \
XGE_HAL_RX_DMA_INTR | \
XGE_HAL_RX_MAC_INTR | \
XGE_HAL_RX_XGXS_INTR | \
XGE_HAL_RX_TRAFFIC_INTR | \
XGE_HAL_MC_INTR | \
XGE_HAL_SCHED_INTR)
#define XGE_HAL_GEN_MASK_INTR (0x0001<<12)
/* Interrupt masks for the general interrupt mask register */
#define XGE_HAL_ALL_INTRS_DIS 0xFFFFFFFFFFFFFFFFULL
#define XGE_HAL_TXPIC_INT_M BIT(0)
#define XGE_HAL_TXDMA_INT_M BIT(1)
#define XGE_HAL_TXMAC_INT_M BIT(2)
#define XGE_HAL_TXXGXS_INT_M BIT(3)
#define XGE_HAL_TXTRAFFIC_INT_M BIT(8)
#define XGE_HAL_PIC_RX_INT_M BIT(32)
#define XGE_HAL_RXDMA_INT_M BIT(33)
#define XGE_HAL_RXMAC_INT_M BIT(34)
#define XGE_HAL_MC_INT_M BIT(35)
#define XGE_HAL_RXXGXS_INT_M BIT(36)
#define XGE_HAL_RXTRAFFIC_INT_M BIT(40)
/* MSI level Interrupts */
#define XGE_HAL_MAX_MSIX_VECTORS (16)
typedef struct xge_hal_ipv4 {
u32 addr;
}xge_hal_ipv4;
typedef struct xge_hal_ipv6 {
u64 addr[2];
}xge_hal_ipv6;
typedef union xge_hal_ipaddr_t {
xge_hal_ipv4 ipv4;
xge_hal_ipv6 ipv6;
}xge_hal_ipaddr_t;
/* DMA level Interrupts */
#define XGE_HAL_TXDMA_PFC_INT_M BIT(0)
/* PFC block interrupts */
#define XGE_HAL_PFC_MISC_ERR_1 BIT(0) /* Interrupt to indicate FIFO
full */
/* basic handles */
typedef void* xge_hal_device_h;
typedef void* xge_hal_dtr_h;
typedef void* xge_hal_channel_h;
/*
* I2C device id. Used in I2C control register for accessing EEPROM device
* memory.
*/
#define XGE_DEV_ID 5
typedef enum xge_hal_xpak_alarm_type_e {
XGE_HAL_XPAK_ALARM_EXCESS_TEMP = 1,
XGE_HAL_XPAK_ALARM_EXCESS_BIAS_CURRENT = 2,
XGE_HAL_XPAK_ALARM_EXCESS_LASER_OUTPUT = 3,
} xge_hal_xpak_alarm_type_e;
__EXTERN_END_DECLS
#endif /* XGE_HAL_TYPES_H */