| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/usie/@/amd64/compile/hs32/modules/usr/src/sys/modules/i2c/controllers/alpm/@/amd64/compile/hs32/modules/usr/src/sys/modules/tx/@/dev/bxe/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/s3/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/usie/@/amd64/compile/hs32/modules/usr/src/sys/modules/i2c/controllers/alpm/@/amd64/compile/hs32/modules/usr/src/sys/modules/tx/@/dev/bxe/if_bxe.c |
/*-
* Copyright (c) 2007-2011 Broadcom Corporation. All rights reserved.
*
* Gary Zambrano <zambrano@broadcom.com>
* David Christensen <davidch@broadcom.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Broadcom Corporation nor the name of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written consent.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/bxe/if_bxe.c 233024 2012-03-16 08:46:58Z scottl $");
/*
* The following controllers are supported by this driver:
* BCM57710 A1+
* BCM57711 A0+
* BCM57711E A0+
*
* The following controllers are not supported by this driver:
* BCM57710 A0 (pre-production)
*
* External PHY References:
* ------------------------
* BCM8073 - Dual Port 10GBase-KR Ethernet PHY
* BCM8705 - 10Gb Ethernet Serial Transceiver
* BCM8706 - 10Gb Ethernet LRM PHY
* BCM8726 - Dual Port 10Gb Ethernet LRM PHY
* BCM8727 - Dual Port 10Gb Ethernet LRM PHY
* BCM8481 - Single Port 10GBase-T Ethernet PHY
* BCM84823 - Dual Port 10GBase-T Ethernet PHY
* SFX7101 - Solarflare 10GBase-T Ethernet PHY
*
*/
#include "opt_bxe.h"
#include "bxe_include.h"
#include "if_bxe.h"
#include "bxe_init.h"
#include "hw_dump_reg_st.h"
#include "dump_e1.h"
#include "dump_e1h.h"
#include "bxe_self_test.h"
/* BXE Debug Options */
#ifdef BXE_DEBUG
uint32_t bxe_debug = BXE_WARN;
/* 0 = Never */
/* 1 = 1 in 2,147,483,648 */
/* 256 = 1 in 8,388,608 */
/* 2048 = 1 in 1,048,576 */
/* 65536 = 1 in 32,768 */
/* 1048576 = 1 in 2,048 */
/* 268435456 = 1 in 8 */
/* 536870912 = 1 in 4 */
/* 1073741824 = 1 in 2 */
/* Controls how often to simulate an mbuf allocation failure. */
int bxe_debug_mbuf_allocation_failure = 0;
/* Controls how often to simulate a DMA mapping failure. */
int bxe_debug_dma_map_addr_failure = 0;
/* Controls how often to simulate a bootcode failure. */
int bxe_debug_bootcode_running_failure = 0;
#endif
#define MDIO_INDIRECT_REG_ADDR 0x1f
#define MDIO_SET_REG_BANK(sc, reg_bank) \
bxe_mdio22_write(sc, MDIO_INDIRECT_REG_ADDR, reg_bank)
#define MDIO_ACCESS_TIMEOUT 1000
#define BMAC_CONTROL_RX_ENABLE 2
/* BXE Build Time Options */
/* #define BXE_NVRAM_WRITE 1 */
#define BXE_USE_DMAE 1
/*
* PCI Device ID Table
* Used by bxe_probe() to identify the devices supported by this driver.
*/
#define BXE_DEVDESC_MAX 64
static struct bxe_type bxe_devs[] = {
/* BCM57710 Controllers and OEM boards. */
{ BRCM_VENDORID, BRCM_DEVICEID_BCM57710, PCI_ANY_ID, PCI_ANY_ID,
"Broadcom NetXtreme II BCM57710 10GbE" },
/* BCM57711 Controllers and OEM boards. */
{ BRCM_VENDORID, BRCM_DEVICEID_BCM57711, PCI_ANY_ID, PCI_ANY_ID,
"Broadcom NetXtreme II BCM57711 10GbE" },
/* BCM57711E Controllers and OEM boards. */
{ BRCM_VENDORID, BRCM_DEVICEID_BCM57711E, PCI_ANY_ID, PCI_ANY_ID,
"Broadcom NetXtreme II BCM57711E 10GbE" },
{0, 0, 0, 0, NULL}
};
/*
* FreeBSD device entry points.
*/
static int bxe_probe(device_t);
static int bxe_attach(device_t);
static int bxe_detach(device_t);
static int bxe_shutdown(device_t);
/*
* Driver local functions.
*/
static void bxe_tunables_set(struct bxe_softc *);
static void bxe_print_adapter_info(struct bxe_softc *);
static void bxe_probe_pci_caps(struct bxe_softc *);
static void bxe_link_settings_supported(struct bxe_softc *, uint32_t);
static void bxe_link_settings_requested(struct bxe_softc *);
static int bxe_hwinfo_function_get(struct bxe_softc *);
static int bxe_hwinfo_port_get(struct bxe_softc *);
static int bxe_hwinfo_common_get(struct bxe_softc *);
static void bxe_undi_unload(struct bxe_softc *);
static int bxe_setup_leading(struct bxe_softc *);
static int bxe_stop_leading(struct bxe_softc *);
static int bxe_setup_multi(struct bxe_softc *, int);
static int bxe_stop_multi(struct bxe_softc *, int);
static int bxe_stop_locked(struct bxe_softc *, int);
static int bxe_alloc_buf_rings(struct bxe_softc *);
static void bxe_free_buf_rings(struct bxe_softc *);
static void bxe_init_locked(struct bxe_softc *, int);
static int bxe_wait_ramrod(struct bxe_softc *, int, int, int *, int);
static void bxe_init_str_wr(struct bxe_softc *, uint32_t, const uint32_t *,
uint32_t);
static void bxe_init_ind_wr(struct bxe_softc *, uint32_t, const uint32_t *,
uint16_t);
static void bxe_init_wr_64(struct bxe_softc *, uint32_t, const uint32_t *,
uint32_t);
static void bxe_write_big_buf(struct bxe_softc *, uint32_t, uint32_t);
static void bxe_init_fill(struct bxe_softc *, uint32_t, int, uint32_t);
static void bxe_init_block(struct bxe_softc *, uint32_t, uint32_t);
static void bxe_init(void *);
static void bxe_release_resources(struct bxe_softc *);
static void bxe_reg_wr_ind(struct bxe_softc *, uint32_t, uint32_t);
static uint32_t bxe_reg_rd_ind(struct bxe_softc *, uint32_t);
static void bxe_post_dmae(struct bxe_softc *, struct dmae_command *, int);
static void bxe_wb_wr(struct bxe_softc *, int, uint32_t, uint32_t);
static __inline uint32_t bxe_reg_poll(struct bxe_softc *, uint32_t,
uint32_t, int, int);
static int bxe_mc_assert(struct bxe_softc *);
static void bxe_panic_dump(struct bxe_softc *);
static void bxe_int_enable(struct bxe_softc *);
static void bxe_int_disable(struct bxe_softc *);
static int bxe_nvram_acquire_lock(struct bxe_softc *);
static int bxe_nvram_release_lock(struct bxe_softc *);
static void bxe_nvram_enable_access(struct bxe_softc *);
static void bxe_nvram_disable_access(struct bxe_softc *);
static int bxe_nvram_read_dword (struct bxe_softc *, uint32_t, uint32_t *,
uint32_t);
static int bxe_nvram_read(struct bxe_softc *, uint32_t, uint8_t *, int);
#ifdef BXE_NVRAM_WRITE_SUPPORT
static int bxe_nvram_write_dword(struct bxe_softc *, uint32_t, uint32_t,
uint32_t);
static int bxe_nvram_write1(struct bxe_softc *, uint32_t, uint8_t *, int);
static int bxe_nvram_write(struct bxe_softc *, uint32_t, uint8_t *, int);
#endif
static int bxe_nvram_test(struct bxe_softc *);
static __inline void bxe_ack_sb(struct bxe_softc *, uint8_t, uint8_t, uint16_t,
uint8_t, uint8_t);
static __inline uint16_t bxe_update_fpsb_idx(struct bxe_fastpath *);
static uint16_t bxe_ack_int(struct bxe_softc *);
static void bxe_sp_event(struct bxe_fastpath *, union eth_rx_cqe *);
static int bxe_acquire_hw_lock(struct bxe_softc *, uint32_t);
static int bxe_release_hw_lock(struct bxe_softc *, uint32_t);
static void bxe_acquire_phy_lock(struct bxe_softc *);
static void bxe_release_phy_lock(struct bxe_softc *);
static void bxe_pmf_update(struct bxe_softc *);
static void bxe_init_port_minmax(struct bxe_softc *);
static void bxe_link_attn(struct bxe_softc *);
static int bxe_sp_post(struct bxe_softc *, int, int, uint32_t, uint32_t, int);
static int bxe_acquire_alr(struct bxe_softc *);
static void bxe_release_alr(struct bxe_softc *);
static uint16_t bxe_update_dsb_idx(struct bxe_softc *);
static void bxe_attn_int_asserted(struct bxe_softc *, uint32_t);
static __inline void bxe_attn_int_deasserted0(struct bxe_softc *, uint32_t);
static __inline void bxe_attn_int_deasserted1(struct bxe_softc *, uint32_t);
static __inline void bxe_attn_int_deasserted2(struct bxe_softc *, uint32_t);
static __inline void bxe_attn_int_deasserted3(struct bxe_softc *, uint32_t);
static void bxe_attn_int_deasserted(struct bxe_softc *, uint32_t);
static void bxe_attn_int(struct bxe_softc *);
static void bxe_stats_storm_post(struct bxe_softc *);
static void bxe_stats_init(struct bxe_softc *);
static void bxe_stats_hw_post(struct bxe_softc *);
static int bxe_stats_comp(struct bxe_softc *);
static void bxe_stats_pmf_update(struct bxe_softc *);
static void bxe_stats_port_base_init(struct bxe_softc *);
static void bxe_stats_port_init(struct bxe_softc *);
static void bxe_stats_func_base_init(struct bxe_softc *);
static void bxe_stats_func_init(struct bxe_softc *);
static void bxe_stats_start(struct bxe_softc *);
static void bxe_stats_pmf_start(struct bxe_softc *);
static void bxe_stats_restart(struct bxe_softc *);
static void bxe_stats_bmac_update(struct bxe_softc *);
static void bxe_stats_emac_update(struct bxe_softc *);
static int bxe_stats_hw_update(struct bxe_softc *);
static int bxe_stats_storm_update(struct bxe_softc *);
static void bxe_stats_func_base_update(struct bxe_softc *);
static void bxe_stats_update(struct bxe_softc *);
static void bxe_stats_port_stop(struct bxe_softc *);
static void bxe_stats_stop(struct bxe_softc *);
static void bxe_stats_do_nothing(struct bxe_softc *);
static void bxe_stats_handle(struct bxe_softc *, enum bxe_stats_event);
static int bxe_tx_encap(struct bxe_fastpath *, struct mbuf **);
static void bxe_tx_start(struct ifnet *);
static void bxe_tx_start_locked(struct ifnet *, struct bxe_fastpath *);
static int bxe_tx_mq_start(struct ifnet *, struct mbuf *);
static int bxe_tx_mq_start_locked(struct ifnet *,
struct bxe_fastpath *, struct mbuf *);
static void bxe_mq_flush(struct ifnet *ifp);
static int bxe_ioctl(struct ifnet *, u_long, caddr_t);
static __inline int bxe_has_rx_work(struct bxe_fastpath *);
static __inline int bxe_has_tx_work(struct bxe_fastpath *);
static void bxe_intr_legacy(void *);
static void bxe_task_sp(void *, int);
static void bxe_intr_sp(void *);
static void bxe_task_fp(void *, int);
static void bxe_intr_fp(void *);
static void bxe_zero_sb(struct bxe_softc *, int);
static void bxe_init_sb(struct bxe_softc *,
struct host_status_block *, bus_addr_t, int);
static void bxe_zero_def_sb(struct bxe_softc *);
static void bxe_init_def_sb(struct bxe_softc *,
struct host_def_status_block *, bus_addr_t, int);
static void bxe_update_coalesce(struct bxe_softc *);
static __inline void bxe_update_rx_prod(struct bxe_softc *,
struct bxe_fastpath *, uint16_t, uint16_t, uint16_t);
static void bxe_clear_sge_mask_next_elems(struct bxe_fastpath *);
static __inline void bxe_init_sge_ring_bit_mask(struct bxe_fastpath *);
static int bxe_alloc_tpa_mbuf(struct bxe_fastpath *, int);
static int bxe_fill_tpa_pool(struct bxe_fastpath *);
static void bxe_free_tpa_pool(struct bxe_fastpath *);
static int bxe_alloc_rx_sge_mbuf(struct bxe_fastpath *, uint16_t);
static int bxe_fill_sg_chain(struct bxe_fastpath *);
static void bxe_free_sg_chain(struct bxe_fastpath *);
static int bxe_alloc_rx_bd_mbuf(struct bxe_fastpath *, uint16_t);
static int bxe_fill_rx_bd_chain(struct bxe_fastpath *);
static void bxe_free_rx_bd_chain(struct bxe_fastpath *);
static void bxe_mutexes_alloc(struct bxe_softc *);
static void bxe_mutexes_free(struct bxe_softc *);
static void bxe_clear_rx_chains(struct bxe_softc *);
static int bxe_init_rx_chains(struct bxe_softc *);
static void bxe_clear_tx_chains(struct bxe_softc *);
static void bxe_init_tx_chains(struct bxe_softc *);
static void bxe_init_sp_ring(struct bxe_softc *);
static void bxe_init_context(struct bxe_softc *);
static void bxe_init_ind_table(struct bxe_softc *);
static void bxe_set_client_config(struct bxe_softc *);
static void bxe_set_storm_rx_mode(struct bxe_softc *);
static void bxe_init_internal_common(struct bxe_softc *);
static void bxe_init_internal_port(struct bxe_softc *);
static void bxe_init_internal_func(struct bxe_softc *);
static void bxe_init_internal(struct bxe_softc *, uint32_t);
static int bxe_init_nic(struct bxe_softc *, uint32_t);
static void bxe_lb_pckt(struct bxe_softc *);
static int bxe_int_mem_test(struct bxe_softc *);
static void bxe_enable_blocks_attention (struct bxe_softc *);
static void bxe_init_pxp(struct bxe_softc *);
static int bxe_init_common(struct bxe_softc *);
static int bxe_init_port(struct bxe_softc *);
static void bxe_ilt_wr(struct bxe_softc *, uint32_t, bus_addr_t);
static int bxe_init_func(struct bxe_softc *);
static int bxe_init_hw(struct bxe_softc *, uint32_t);
static int bxe_fw_command(struct bxe_softc *, uint32_t);
static void bxe_host_structures_free(struct bxe_softc *);
static void bxe_dma_map_addr(void *, bus_dma_segment_t *, int, int);
static int bxe_host_structures_alloc(device_t);
static void bxe_set_mac_addr_e1(struct bxe_softc *, int);
static void bxe_set_mac_addr_e1h(struct bxe_softc *, int);
static void bxe_set_rx_mode(struct bxe_softc *);
static void bxe_reset_func(struct bxe_softc *);
static void bxe_reset_port(struct bxe_softc *);
static void bxe_reset_common(struct bxe_softc *);
static void bxe_reset_chip(struct bxe_softc *, uint32_t);
static int bxe_ifmedia_upd(struct ifnet *);
static void bxe_ifmedia_status(struct ifnet *, struct ifmediareq *);
static __inline void bxe_update_last_max_sge(struct bxe_fastpath *, uint16_t);
static void bxe_update_sge_prod(struct bxe_fastpath *,
struct eth_fast_path_rx_cqe *);
static void bxe_tpa_start(struct bxe_fastpath *, uint16_t, uint16_t, uint16_t);
static int bxe_fill_frag_mbuf(struct bxe_softc *, struct bxe_fastpath *,
struct mbuf *, struct eth_fast_path_rx_cqe *, uint16_t);
static void bxe_tpa_stop(struct bxe_softc *, struct bxe_fastpath *, uint16_t,
int, int, union eth_rx_cqe *, uint16_t);
static void bxe_rxeof(struct bxe_fastpath *);
static void bxe_txeof(struct bxe_fastpath *);
static int bxe_watchdog(struct bxe_fastpath *fp);
static void bxe_tick(void *);
static void bxe_add_sysctls(struct bxe_softc *);
static void bxe_write_dmae_phys_len(struct bxe_softc *,
bus_addr_t, uint32_t, uint32_t);
void bxe_write_dmae(struct bxe_softc *, bus_addr_t, uint32_t, uint32_t);
void bxe_read_dmae(struct bxe_softc *, uint32_t, uint32_t);
int bxe_set_gpio(struct bxe_softc *, int, uint32_t, uint8_t);
int bxe_get_gpio(struct bxe_softc *, int, uint8_t);
int bxe_set_spio(struct bxe_softc *, int, uint32_t);
int bxe_set_gpio_int(struct bxe_softc *, int, uint32_t, uint8_t);
/*
* BXE Debug Data Structure Dump Routines
*/
#ifdef BXE_DEBUG
static int bxe_sysctl_driver_state(SYSCTL_HANDLER_ARGS);
static int bxe_sysctl_hw_state(SYSCTL_HANDLER_ARGS);
static int bxe_sysctl_dump_fw(SYSCTL_HANDLER_ARGS);
static int bxe_sysctl_dump_rx_cq_chain(SYSCTL_HANDLER_ARGS);
static int bxe_sysctl_dump_rx_bd_chain(SYSCTL_HANDLER_ARGS);
static int bxe_sysctl_dump_tx_chain(SYSCTL_HANDLER_ARGS);
static int bxe_sysctl_reg_read(SYSCTL_HANDLER_ARGS);
static int bxe_sysctl_breakpoint(SYSCTL_HANDLER_ARGS);
static __noinline void bxe_validate_rx_packet(struct bxe_fastpath *,
uint16_t, union eth_rx_cqe *, struct mbuf *);
static void bxe_grcdump(struct bxe_softc *, int);
static __noinline void bxe_dump_enet(struct bxe_softc *,struct mbuf *);
static __noinline void bxe_dump_mbuf (struct bxe_softc *, struct mbuf *);
static __noinline void bxe_dump_tx_mbuf_chain(struct bxe_softc *, int, int);
static __noinline void bxe_dump_rx_mbuf_chain(struct bxe_softc *, int, int);
static __noinline void bxe_dump_tx_parsing_bd(struct bxe_fastpath *,int,
struct eth_tx_parse_bd *);
static __noinline void bxe_dump_txbd(struct bxe_fastpath *, int,
union eth_tx_bd_types *);
static __noinline void bxe_dump_rxbd(struct bxe_fastpath *, int,
struct eth_rx_bd *);
static __noinline void bxe_dump_cqe(struct bxe_fastpath *,
int, union eth_rx_cqe *);
static __noinline void bxe_dump_tx_chain(struct bxe_fastpath *, int, int);
static __noinline void bxe_dump_rx_cq_chain(struct bxe_fastpath *, int, int);
static __noinline void bxe_dump_rx_bd_chain(struct bxe_fastpath *, int, int);
static __noinline void bxe_dump_status_block(struct bxe_softc *);
static __noinline void bxe_dump_stats_block(struct bxe_softc *);
static __noinline void bxe_dump_fp_state(struct bxe_fastpath *);
static __noinline void bxe_dump_port_state_locked(struct bxe_softc *);
static __noinline void bxe_dump_link_vars_state_locked(struct bxe_softc *);
static __noinline void bxe_dump_link_params_state_locked(struct bxe_softc *);
static __noinline void bxe_dump_driver_state(struct bxe_softc *);
static __noinline void bxe_dump_hw_state(struct bxe_softc *);
static __noinline void bxe_dump_fw(struct bxe_softc *);
static void bxe_decode_mb_msgs(struct bxe_softc *, uint32_t, uint32_t);
static void bxe_decode_ramrod_cmd(struct bxe_softc *, int);
static void bxe_breakpoint(struct bxe_softc *);
#endif
#define BXE_DRIVER_VERSION "1.5.52"
static void bxe_init_e1_firmware(struct bxe_softc *sc);
static void bxe_init_e1h_firmware(struct bxe_softc *sc);
/*
* FreeBSD device dispatch table.
*/
static device_method_t bxe_methods[] = {
/* Device interface (device_if.h) */
DEVMETHOD(device_probe, bxe_probe),
DEVMETHOD(device_attach, bxe_attach),
DEVMETHOD(device_detach, bxe_detach),
DEVMETHOD(device_shutdown, bxe_shutdown),
DEVMETHOD_END
};
static driver_t bxe_driver = {
"bxe",
bxe_methods,
sizeof(struct bxe_softc)
};
static devclass_t bxe_devclass;
MODULE_DEPEND(bxe, pci, 1, 1, 1);
MODULE_DEPEND(bxe, ether, 1, 1, 1);
DRIVER_MODULE(bxe, pci, bxe_driver, bxe_devclass, 0, 0);
/*
* Tunable device values
*/
SYSCTL_NODE(_hw, OID_AUTO, bxe, CTLFLAG_RD, 0, "bxe driver parameters");
/* Allowable values are TRUE (1) or FALSE (0). */
static int bxe_dcc_enable = FALSE;
TUNABLE_INT("hw.bxe.dcc_enable", &bxe_dcc_enable);
SYSCTL_UINT(_hw_bxe, OID_AUTO, dcc_enable, CTLFLAG_RDTUN, &bxe_dcc_enable,
0, "dcc Enable/Disable");
/* Allowable values are TRUE (1) or FALSE (0). */
static int bxe_tso_enable = TRUE;
TUNABLE_INT("hw.bxe.tso_enable", &bxe_tso_enable);
SYSCTL_UINT(_hw_bxe, OID_AUTO, tso_enable, CTLFLAG_RDTUN, &bxe_tso_enable,
0, "TSO Enable/Disable");
/* Allowable values are 0 (IRQ), 1 (MSI/IRQ), and 2 (MSI-X/MSI/IRQ). */
static int bxe_int_mode = 2;
TUNABLE_INT("hw.bxe.int_mode", &bxe_int_mode);
SYSCTL_UINT(_hw_bxe, OID_AUTO, int_mode, CTLFLAG_RDTUN, &bxe_int_mode,
0, "Interrupt (MSI-X|MSI|INTx) mode");
/*
* Specifies the number of queues that will be used when a multi-queue
* RSS mode is selected using bxe_multi_mode below.
*
* Allowable values are 0 (Auto) or 1 to MAX_CONTEXT (fixed queue number).
*/
static int bxe_queue_count = 0;
TUNABLE_INT("hw.bxe.queue_count", &bxe_queue_count);
SYSCTL_UINT(_hw_bxe, OID_AUTO, queue_count, CTLFLAG_RDTUN, &bxe_queue_count,
0, "Multi-Queue queue count");
/*
* ETH_RSS_MODE_DISABLED (0)
* Disables all multi-queue/packet sorting algorithms. All
* received frames are routed to a single receive queue.
*
* ETH_RSS_MODE_REGULAR (1)
* The default mode which assigns incoming frames to receive
* queues according to RSS (i.e a 2-tuple match on the source/
* destination IP address or a 4-tuple match on the source/
* destination IP address and the source/destination TCP port).
*
*/
static int bxe_multi_mode = ETH_RSS_MODE_REGULAR;
TUNABLE_INT("hw.bxe.multi_mode", &bxe_multi_mode);
SYSCTL_UINT(_hw_bxe, OID_AUTO, multi_mode, CTLFLAG_RDTUN, &bxe_multi_mode,
0, "Multi-Queue Mode");
/*
* Host interrupt coalescing is controller by these values.
* The first frame always causes an interrupt but subsequent
* frames are coalesced until the RX/TX ticks timer value
* expires and another interrupt occurs. (Ticks are measured
* in microseconds.)
*/
static uint32_t bxe_rx_ticks = 25;
TUNABLE_INT("hw.bxe.rx_ticks", &bxe_rx_ticks);
SYSCTL_UINT(_hw_bxe, OID_AUTO, rx_ticks, CTLFLAG_RDTUN, &bxe_rx_ticks,
0, "Receive ticks");
static uint32_t bxe_tx_ticks = 50;
TUNABLE_INT("hw.bxe.tx_ticks", &bxe_tx_ticks);
SYSCTL_UINT(_hw_bxe, OID_AUTO, tx_ticks, CTLFLAG_RDTUN, &bxe_tx_ticks,
0, "Transmit ticks");
/*
* Allows the PCIe maximum read request size value to be manually
* set during initialization rather than automatically determined
* by the driver.
*
* Allowable values are:
* -1 (Auto), 0 (128B), 1 (256B), 2 (512B), 3 (1KB)
*/
static int bxe_mrrs = -1;
TUNABLE_INT("hw.bxe.mrrs", &bxe_mrrs);
SYSCTL_UINT(_hw_bxe, OID_AUTO, mrrs, CTLFLAG_RDTUN, &bxe_mrrs,
0, "PCIe maximum read request size.");
#if 0
/*
* Allows setting the maximum number of received frames to process
* during an interrupt.
*
* Allowable values are:
* -1 (Unlimited), 0 (None), otherwise specifies the number of RX frames.
*/
static int bxe_rx_limit = -1;
TUNABLE_INT("hw.bxe.rx_limit", &bxe_rx_limit);
SYSCTL_UINT(_hw_bxe, OID_AUTO, rx_limit, CTLFLAG_RDTUN, &bxe_rx_limit,
0, "Maximum received frames processed during an interrupt.");
/*
* Allows setting the maximum number of transmit frames to process
* during an interrupt.
*
* Allowable values are:
* -1 (Unlimited), 0 (None), otherwise specifies the number of TX frames.
*/
static int bxe_tx_limit = -1;
TUNABLE_INT("hw.bxe.tx_limit", &bxe_tx_limit);
SYSCTL_UINT(_hw_bxe, OID_AUTO, tx_limit, CTLFLAG_RDTUN, &bxe_tx_limit,
0, "Maximum transmit frames processed during an interrupt.");
#endif
/*
* Global variables
*/
/* 0 is common, 1 is port 0, 2 is port 1. */
static int load_count[3];
/* Tracks whether MCP firmware is running. */
static int nomcp;
#ifdef BXE_DEBUG
/*
* A debug version of the 32 bit OS register write function to
* capture/display values written to the controller.
*
* Returns:
* None.
*/
void
bxe_reg_write32(struct bxe_softc *sc, bus_size_t offset, uint32_t val)
{
if ((offset % 4) != 0) {
DBPRINT(sc, BXE_WARN,
"%s(): Warning! Unaligned write to 0x%jX!\n", __FUNCTION__,
(uintmax_t)offset);
}
DBPRINT(sc, BXE_INSANE_REGS, "%s(): offset = 0x%jX, val = 0x%08X\n",
__FUNCTION__, (uintmax_t)offset, val);
bus_space_write_4(sc->bxe_btag, sc->bxe_bhandle, offset, val);
}
/*
* A debug version of the 16 bit OS register write function to
* capture/display values written to the controller.
*
* Returns:
* None.
*/
static void
bxe_reg_write16(struct bxe_softc *sc, bus_size_t offset, uint16_t val)
{
if ((offset % 2) != 0) {
DBPRINT(sc, BXE_WARN,
"%s(): Warning! Unaligned write to 0x%jX!\n", __FUNCTION__,
(uintmax_t)offset);
}
DBPRINT(sc, BXE_INSANE_REGS, "%s(): offset = 0x%jX, val = 0x%04X\n",
__FUNCTION__, (uintmax_t)offset, val);
bus_space_write_2(sc->bxe_btag, sc->bxe_bhandle, offset, val);
}
/*
* A debug version of the 8 bit OS register write function to
* capture/display values written to the controller.
*
* Returns:
* None.
*/
static void
bxe_reg_write8(struct bxe_softc *sc, bus_size_t offset, uint8_t val)
{
DBPRINT(sc, BXE_INSANE_REGS, "%s(): offset = 0x%jX, val = 0x%02X\n",
__FUNCTION__, (uintmax_t)offset, val);
bus_space_write_1(sc->bxe_btag, sc->bxe_bhandle, offset, val);
}
/*
* A debug version of the 32 bit OS register read function to
* capture/display values read from the controller.
*
* Returns:
* 32bit value read.
*/
uint32_t
bxe_reg_read32(struct bxe_softc *sc, bus_size_t offset)
{
uint32_t val;
if ((offset % 4) != 0) {
DBPRINT(sc, BXE_WARN,
"%s(): Warning! Unaligned read from 0x%jX!\n",
__FUNCTION__, (uintmax_t)offset);
}
val = bus_space_read_4(sc->bxe_btag, sc->bxe_bhandle, offset);
DBPRINT(sc, BXE_INSANE_REGS, "%s(): offset = 0x%jX, val = 0x%08X\n",
__FUNCTION__, (uintmax_t)offset, val);
return (val);
}
/*
* A debug version of the 16 bit OS register read function to
* capture/display values read from the controller.
*
* Returns:
* 16bit value read.
*/
static uint16_t
bxe_reg_read16(struct bxe_softc *sc, bus_size_t offset)
{
uint16_t val;
if ((offset % 2) != 0) {
DBPRINT(sc, BXE_WARN,
"%s(): Warning! Unaligned read from 0x%jX!\n",
__FUNCTION__, (uintmax_t)offset);
}
val = bus_space_read_2(sc->bxe_btag, sc->bxe_bhandle, offset);
DBPRINT(sc, BXE_INSANE_REGS, "%s(): offset = 0x%jX, val = 0x%08X\n",
__FUNCTION__, (uintmax_t)offset, val);
return (val);
}
/*
* A debug version of the 8 bit OS register write function to
* capture/display values written to the controller.
*
* Returns:
* 8bit value read.
*/
static uint8_t
bxe_reg_read8(struct bxe_softc *sc, bus_size_t offset)
{
uint8_t val = bus_space_read_1(sc->bxe_btag, sc->bxe_bhandle, offset);
DBPRINT(sc, BXE_INSANE_REGS, "%s(): offset = 0x%jX, val = 0x%02X\n",
__FUNCTION__, (uintmax_t)offset, val);
return (val);
}
#endif
static void
bxe_read_mf_cfg(struct bxe_softc *sc)
{
int func, vn;
for (vn = VN_0; vn < E1HVN_MAX; vn++) {
func = 2 * vn + BP_PORT(sc);
sc->mf_config[vn] =
SHMEM_RD(sc,mf_cfg.func_mf_config[func].config);
}
}
static void
bxe_e1h_disable(struct bxe_softc *sc)
{
int port;
port = BP_PORT(sc);
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
sc->bxe_ifp->if_drv_flags = 0;
}
static void
bxe_e1h_enable(struct bxe_softc *sc)
{
int port;
port = BP_PORT(sc);
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
sc->bxe_ifp->if_drv_flags = IFF_DRV_RUNNING;
}
/*
* Calculates the sum of vn_min_rates.
* It's needed for further normalizing of the min_rates.
* Returns:
* sum of vn_min_rates.
* or
* 0 - if all the min_rates are 0. In the later case fainess
* algorithm should be deactivated. If not all min_rates are
* zero then those that are zeroes will be set to 1.
*/
static void
bxe_calc_vn_wsum(struct bxe_softc *sc)
{
uint32_t vn_cfg, vn_min_rate;
int all_zero, vn;
DBENTER(BXE_VERBOSE_LOAD);
all_zero = 1;
sc->vn_wsum = 0;
for (vn = VN_0; vn < E1HVN_MAX; vn++) {
vn_cfg = sc->mf_config[vn];
vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
/* Skip hidden vns */
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
continue;
/* If min rate is zero - set it to 1. */
if (!vn_min_rate)
vn_min_rate = DEF_MIN_RATE;
else
all_zero = 0;
sc->vn_wsum += vn_min_rate;
}
/* ... only if all min rates are zeros - disable fairness */
if (all_zero)
sc->cmng.flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
else
sc->cmng.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
DBEXIT(BXE_VERBOSE_LOAD);
}
/*
*
* Returns:
* None.
*/
static void
bxe_init_vn_minmax(struct bxe_softc *sc, int vn)
{
struct rate_shaping_vars_per_vn m_rs_vn;
struct fairness_vars_per_vn m_fair_vn;
uint32_t vn_cfg;
uint16_t vn_min_rate, vn_max_rate;
int func, i;
vn_cfg = sc->mf_config[vn];
func = 2 * vn + BP_PORT(sc);
DBENTER(BXE_VERBOSE_LOAD);
/* If function is hidden - set min and max to zeroes. */
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
vn_min_rate = 0;
vn_max_rate = 0;
} else {
vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
/*
* If fairness is enabled (i.e. not all min rates are zero),
* and if the current min rate is zero, set it to 1.
* This is a requirement of the algorithm.
*/
if (sc->vn_wsum && (vn_min_rate == 0))
vn_min_rate = DEF_MIN_RATE;
vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
if (vn_max_rate == 0)
return;
}
DBPRINT(sc, BXE_INFO_LOAD,
"%s(): func %d: vn_min_rate = %d, vn_max_rate = %d, wsum = %d.\n",
__FUNCTION__, func, vn_min_rate, vn_max_rate, sc->vn_wsum);
memset(&m_rs_vn, 0, sizeof(struct rate_shaping_vars_per_vn));
memset(&m_fair_vn, 0, sizeof(struct fairness_vars_per_vn));
/* Global VNIC counter - maximal Mbps for this VNIC. */
m_rs_vn.vn_counter.rate = vn_max_rate;
/* Quota - number of bytes transmitted in this period. */
m_rs_vn.vn_counter.quota =
(vn_max_rate * RS_PERIODIC_TIMEOUT_USEC) / 8;
if (sc->vn_wsum) {
/*
* Credit for each period of the fairness algorithm. The
* number of bytes in T_FAIR (the VNIC shares the port rate).
* vn_wsum should not be larger than 10000, thus
* T_FAIR_COEF / (8 * vn_wsum) will always be grater than zero.
*/
m_fair_vn.vn_credit_delta =
max((uint32_t)(vn_min_rate * (T_FAIR_COEF /
(8 * sc->vn_wsum))),
(uint32_t)(sc->cmng.fair_vars.fair_threshold * 2));
}
func = BP_FUNC(sc);
/* Store it to internal memory */
for (i = 0; i < sizeof(struct rate_shaping_vars_per_vn) / 4; i++)
REG_WR(sc, BAR_XSTORM_INTMEM +
XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func) + (i * 4),
((uint32_t *)(&m_rs_vn))[i]);
for (i = 0; i < sizeof(struct fairness_vars_per_vn) / 4; i++)
REG_WR(sc, BAR_XSTORM_INTMEM +
XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func) + (i * 4),
((uint32_t *)(&m_fair_vn))[i]);
DBEXIT(BXE_VERBOSE_LOAD);
}
static void
bxe_congestionmgmt(struct bxe_softc *sc, uint8_t readshm)
{
int vn;
DBENTER(BXE_VERBOSE_LOAD);
/* Read mf conf from shmem. */
if (readshm)
bxe_read_mf_cfg(sc);
/* Init rate shaping and fairness contexts */
bxe_init_port_minmax(sc);
/* vn_weight_sum and enable fairness if not 0 */
bxe_calc_vn_wsum(sc);
/* calculate and set min-max rate for each vn */
for (vn = 0; vn < E1HVN_MAX; vn++)
bxe_init_vn_minmax(sc, vn);
/* Always enable rate shaping and fairness. */
sc->cmng.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
DBPRINT(sc, BXE_VERBOSE_LOAD,
"%s(): Rate shaping set\n", __FUNCTION__);
if (!sc->vn_wsum)
DBPRINT(sc, BXE_INFO_LOAD, "%s(): All MIN values "
"are zeroes, fairness is disabled\n", __FUNCTION__);
DBEXIT(BXE_VERBOSE_LOAD);
}
static void
bxe_dcc_event(struct bxe_softc *sc, uint32_t dcc_event)
{
int i, port;
DBENTER(BXE_VERBOSE_LOAD);
if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
if (sc->mf_config[BP_E1HVN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
DBPRINT(sc, BXE_INFO_LOAD, "%s(): mf_cfg function "
"disabled\n", __FUNCTION__);
sc->state = BXE_STATE_DISABLED;
bxe_e1h_disable(sc);
} else {
DBPRINT(sc, BXE_INFO_LOAD, "%s(): mf_cfg function "
"enabled\n", __FUNCTION__);
sc->state = BXE_STATE_OPEN;
bxe_e1h_enable(sc);
}
dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
}
if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
port = BP_PORT(sc);
bxe_congestionmgmt(sc, TRUE);
for (i = 0; i < sizeof(struct cmng_struct_per_port) / 4; i++)
REG_WR(sc, BAR_XSTORM_INTMEM +
XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) + i*4,
((uint32_t *)(&sc->cmng))[i]);
dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
}
/* Report results to MCP */
if (dcc_event)
bxe_fw_command(sc, DRV_MSG_CODE_DCC_FAILURE);
else
bxe_fw_command(sc, DRV_MSG_CODE_DCC_OK);
DBEXIT(BXE_VERBOSE_LOAD);
}
/*
* Device probe function.
*
* Compares the device to the driver's list of supported devices and
* reports back to the OS whether this is the right driver for the device.
*
* Returns:
* BUS_PROBE_DEFAULT on success, positive value on failure.
*/
static int
bxe_probe(device_t dev)
{
struct bxe_softc *sc;
struct bxe_type *t;
char *descbuf;
uint16_t did, sdid, svid, vid;
sc = device_get_softc(dev);
sc->dev = dev;
t = bxe_devs;
/* Get the data for the device to be probed. */
vid = pci_get_vendor(dev);
did = pci_get_device(dev);
svid = pci_get_subvendor(dev);
sdid = pci_get_subdevice(dev);
DBPRINT(sc, BXE_VERBOSE_LOAD,
"%s(); VID = 0x%04X, DID = 0x%04X, SVID = 0x%04X, "
"SDID = 0x%04X\n", __FUNCTION__, vid, did, svid, sdid);
/* Look through the list of known devices for a match. */
while (t->bxe_name != NULL) {
if ((vid == t->bxe_vid) && (did == t->bxe_did) &&
((svid == t->bxe_svid) || (t->bxe_svid == PCI_ANY_ID)) &&
((sdid == t->bxe_sdid) || (t->bxe_sdid == PCI_ANY_ID))) {
descbuf = malloc(BXE_DEVDESC_MAX, M_TEMP, M_NOWAIT);
if (descbuf == NULL)
return (ENOMEM);
/* Print out the device identity. */
snprintf(descbuf, BXE_DEVDESC_MAX,
"%s (%c%d) BXE v:%s\n", t->bxe_name,
(((pci_read_config(dev, PCIR_REVID, 4) &
0xf0) >> 4) + 'A'),
(pci_read_config(dev, PCIR_REVID, 4) & 0xf),
BXE_DRIVER_VERSION);
device_set_desc_copy(dev, descbuf);
free(descbuf, M_TEMP);
return (BUS_PROBE_DEFAULT);
}
t++;
}
return (ENXIO);
}
/*
* Prints useful adapter info.
*
* Returns:
* None.
*/
/* ToDo: Create a sysctl for this info. */
static void
bxe_print_adapter_info(struct bxe_softc *sc)
{
int i = 0;
DBENTER(BXE_EXTREME_LOAD);
/* Hardware chip info. */
BXE_PRINTF("ASIC (0x%08X); ", sc->common.chip_id);
printf("Rev (%c%d); ", (CHIP_REV(sc) >> 12) + 'A',
(CHIP_METAL(sc) >> 4));
/* Bus info. */
printf("Bus (PCIe x%d, ", sc->pcie_link_width);
switch (sc->pcie_link_speed) {
case 1:
printf("2.5Gbps");
break;
case 2:
printf("5Gbps");
break;
default:
printf("Unknown link speed");
}
/* Device features. */
printf("); Flags (");
/* Miscellaneous flags. */
if (sc->msi_count > 0)
printf("MSI");
if (sc->msix_count > 0) {
if (i > 0) printf("|");
printf("MSI-X"); i++;
}
if (TPA_ENABLED(sc)) {
if (i > 0) printf("|");
printf("TPA"); i++;
}
printf("); Queues (");
switch (sc->multi_mode) {
case ETH_RSS_MODE_DISABLED:
printf("None");
break;
case ETH_RSS_MODE_REGULAR:
printf("RSS:%d", sc->num_queues);
break;
default:
printf("Unknown");
break;
}
printf("); BD's (RX:%d,TX:%d",
(int) USABLE_RX_BD, (int) USABLE_TX_BD);
/* Firmware versions and device features. */
printf("); Firmware (%d.%d.%d); Bootcode (%d.%d.%d)\n",
BCM_5710_FW_MAJOR_VERSION,
BCM_5710_FW_MINOR_VERSION,
BCM_5710_FW_REVISION_VERSION,
(int)((sc->common.bc_ver & 0xff0000) >> 16),
(int)((sc->common.bc_ver & 0x00ff00) >> 8),
(int)((sc->common.bc_ver & 0x0000ff)));
DBEXIT(BXE_EXTREME_LOAD);
}
/*
* Release any interrupts allocated by the driver.
*
* Returns:
* None
*/
static void
bxe_interrupt_free(struct bxe_softc *sc)
{
device_t dev;
int i;
DBENTER(BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
dev = sc->dev;
if (sc->msix_count > 0) {
/* Free MSI-X resources. */
for (i = 0; i < sc->msix_count; i++) {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET |
BXE_VERBOSE_INTR), "%s(): Releasing MSI-X[%d] "
"vector.\n", __FUNCTION__, i);
if (sc->bxe_msix_res[i] && sc->bxe_msix_rid[i])
bus_release_resource(dev, SYS_RES_IRQ,
sc->bxe_msix_rid[i], sc->bxe_msix_res[i]);
}
pci_release_msi(dev);
} else if (sc->msi_count > 0) {
/* Free MSI resources. */
for (i = 0; i < sc->msi_count; i++) {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET |
BXE_VERBOSE_INTR), "%s(): Releasing MSI[%d] "
"vector.\n", __FUNCTION__, i);
if (sc->bxe_msi_res[i] && sc->bxe_msi_rid[i])
bus_release_resource(dev, SYS_RES_IRQ,
sc->bxe_msi_rid[i], sc->bxe_msi_res[i]);
}
pci_release_msi(dev);
} else {
/* Free legacy interrupt resources. */
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET |
BXE_VERBOSE_INTR), "%s(): Releasing legacy interrupt.\n",
__FUNCTION__);
if (sc->bxe_irq_res != NULL)
bus_release_resource(dev, SYS_RES_IRQ,
sc->bxe_irq_rid, sc->bxe_irq_res);
}
DBEXIT(BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
/*
* This function determines and allocates the appropriate
* interrupt based on system capabilites and user request.
*
* The user may force a particular interrupt mode, specify
* the number of receive queues, specify the method for
* distribuitng received frames to receive queues, or use
* the default settings which will automatically select the
* best supported combination. In addition, the OS may or
* may not support certain combinations of these settings.
* This routine attempts to reconcile the settings requested
* by the user with the capabilites available from the system
* to select the optimal combination of features.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_interrupt_alloc(struct bxe_softc *sc)
{
device_t dev;
int error, i, rid, rc;
int msi_count, msi_required, msi_allocated;
int msix_count, msix_required, msix_allocated;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR);
rc = 0;
dev = sc->dev;
msi_count = msi_required = msi_allocated = 0;
msix_count = msix_required = msix_allocated = 0;
/* Get the number of available MSI/MSI-X interrupts from the OS. */
if (sc->int_mode > 0) {
if (sc->bxe_cap_flags & BXE_MSIX_CAPABLE_FLAG)
msix_count = pci_msix_count(dev);
if (sc->bxe_cap_flags & BXE_MSI_CAPABLE_FLAG)
msi_count = pci_msi_count(dev);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): %d MSI and %d MSI-X vectors available.\n",
__FUNCTION__, msi_count, msix_count);
}
/* Try allocating MSI-X interrupt resources. */
if ((sc->bxe_cap_flags & BXE_MSIX_CAPABLE_FLAG) &&
(sc->int_mode > 1) && (msix_count > 0) &&
(msix_count >= sc->num_queues)) {
/* Ask for the necessary number of MSI-X vectors. */
if (sc->num_queues == 1)
msix_allocated = msix_required = 2;
else
msix_allocated = msix_required = sc->num_queues + 1;
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Requesting %d MSI-X vectors.\n",
__FUNCTION__, msix_required);
/* BSD resource identifier */
rid = 1;
error = pci_alloc_msix(dev, &msix_allocated);
if (error == 0) {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Required/Allocated (%d/%d) MSI-X vector(s).\n",
__FUNCTION__, msix_required, msix_allocated);
/* Make sure we got all the interrupts we asked for. */
if (msix_allocated >= msix_required) {
sc->msix_count = msix_required;
msi_count = 0;
/* Allocate the MSI-X vectors. */
for (i = 0; i < msix_required; i++) {
sc->bxe_msix_rid[i] = rid + i +
BP_L_ID(sc);
sc->bxe_msix_res[i] =
bus_alloc_resource_any(dev,
SYS_RES_IRQ, &sc->bxe_msix_rid[i],
RF_ACTIVE);
/* Report any IRQ allocation errors. */
if (sc->bxe_msix_res[i] == NULL) {
BXE_PRINTF(
"%s(%d): Failed to map MSI-X[%d] vector!\n",
__FILE__, __LINE__, (3));
rc = ENXIO;
goto bxe_interrupt_alloc_exit;
}
}
} else {
DBPRINT(sc, BXE_WARN,
"%s(): MSI-X allocation failed!\n",
__FUNCTION__);
/* Release any resources acquired. */
pci_release_msi(dev);
sc->msix_count = msix_count = 0;
/* We'll try MSI next. */
sc->int_mode = 1;
}
}
}
/* Try allocating MSI vector resources. */
if ((sc->bxe_cap_flags & BXE_MSI_CAPABLE_FLAG) &&
(sc->int_mode > 0) && (msi_count > 0) &&
(msi_count >= sc->num_queues)) {
/* Ask for the necessary number of MSI vectors. */
if (sc->num_queues == 1)
msi_required = msi_allocated = 1;
else
msi_required = msi_allocated = BXE_MSI_VECTOR_COUNT;
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Requesting %d MSI vectors.\n", __FUNCTION__,
msi_required);
rid = 1;
error = pci_alloc_msi(dev, &msi_allocated);
if (error == 0) {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Required/Allocated (%d/%d) MSI vector(s).\n",
__FUNCTION__, msi_required, msi_allocated);
/*
* Make sure we got all the vectors we asked for.
* XXX
* FreeBSD always gives 8 even if we ask for less.
*/
if (msi_required >= msi_allocated) {
sc->msi_count = msi_required;
/* Allocate the MSI vectors. */
for (i = 0; i < msi_required; i++) {
sc->bxe_msi_rid[i] = i + rid;
sc->bxe_msi_res[i] =
bus_alloc_resource_any(dev,
SYS_RES_IRQ, &sc->bxe_msi_rid[i],
RF_ACTIVE);
/* Report any IRQ allocation errors. */
if (sc->bxe_msi_res[i] == NULL) {
BXE_PRINTF(
"%s(%d): Failed to map MSI vector (%d)!\n",
__FILE__, __LINE__, (i));
rc = ENXIO;
goto bxe_interrupt_alloc_exit;
}
}
}
} else {
DBPRINT(sc, BXE_WARN, "%s(): MSI allocation failed!\n",
__FUNCTION__);
/* Release any resources acquired. */
pci_release_msi(dev);
sc->msi_count = msi_count = 0;
/* We'll try INTx next. */
sc->int_mode = 0;
}
}
/* Try allocating INTx resources. */
if (sc->int_mode == 0) {
sc->num_queues = 1;
sc->multi_mode = ETH_RSS_MODE_DISABLED;
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Requesting legacy INTx interrupt.\n",
__FUNCTION__);
rid = 0;
sc->bxe_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
/* Report any IRQ allocation errors. */
if (sc->bxe_irq_res == NULL) {
BXE_PRINTF("%s(%d): PCI map interrupt failed!\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bxe_interrupt_alloc_exit;
}
sc->bxe_irq_rid = rid;
}
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Actual: int_mode = %d, multi_mode = %d, num_queues = %d\n",
__FUNCTION__, sc->int_mode, sc->multi_mode, sc->num_queues);
bxe_interrupt_alloc_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR);
return (rc);
}
/*
* This function releases taskqueues.
*
* Returns:
* None
*/
static void
bxe_interrupt_detach(struct bxe_softc *sc)
{
#ifdef BXE_TASK
struct bxe_fastpath *fp;
#endif
device_t dev;
int i;
DBENTER(BXE_VERBOSE_UNLOAD);
dev = sc->dev;
#ifdef BXE_TASK
/* Free the OS taskqueue resources. */
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
if (fp->tq != NULL) {
taskqueue_drain(fp->tq, &fp->task);
taskqueue_free(fp->tq);
}
}
if (sc->tq != NULL) {
taskqueue_drain(sc->tq, &sc->task);
taskqueue_free(sc->tq);
}
#endif
/* Release interrupt resources. */
if (sc->msix_count > 0) {
for (i = 0; i < sc->msix_count; i++) {
if (sc->bxe_msix_tag[i] && sc->bxe_msix_res[i])
bus_teardown_intr(dev, sc->bxe_msix_res[i],
sc->bxe_msix_tag[i]);
}
} else if (sc->msi_count > 0) {
for (i = 0; i < sc->msi_count; i++) {
if (sc->bxe_msi_tag[i] && sc->bxe_msi_res[i])
bus_teardown_intr(dev, sc->bxe_msi_res[i],
sc->bxe_msi_tag[i]);
}
} else {
if (sc->bxe_irq_tag != NULL)
bus_teardown_intr(dev, sc->bxe_irq_res,
sc->bxe_irq_tag);
}
DBEXIT(BXE_VERBOSE_UNLOAD);
}
/*
* This function enables interrupts and attachs to the ISR.
*
* When using multiple MSI/MSI-X vectors the first vector
* is used for slowpath operations while all remaining
* vectors are used for fastpath operations. If only a
* single MSI/MSI-X vector is used (SINGLE_ISR) then the
* ISR must look for both slowpath and fastpath completions.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_interrupt_attach(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i, rc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR);
rc = 0;
#ifdef BXE_TASK
/* Setup the slowpath deferred task queue. */
TASK_INIT(&sc->task, 0, bxe_task_sp, sc);
sc->tq = taskqueue_create_fast("bxe_spq", M_NOWAIT,
taskqueue_thread_enqueue, &sc->tq);
taskqueue_start_threads(&sc->tq, 1, PI_NET, "%s spq",
device_get_nameunit(sc->dev));
#endif
/* Setup interrupt handlers. */
if (sc->msix_count > 0) {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Enabling slowpath MSI-X[0] vector.\n",__FUNCTION__);
/*
* Setup the interrupt handler. Note that we pass the
* driver instance to the interrupt handler for the
* slowpath.
*/
rc = bus_setup_intr(sc->dev, sc->bxe_msix_res[0],
INTR_TYPE_NET | INTR_MPSAFE, NULL, bxe_intr_sp,
sc, &sc->bxe_msix_tag[0]);
if (rc) {
BXE_PRINTF(
"%s(%d): Failed to allocate MSI-X[0] vector!\n",
__FILE__, __LINE__);
goto bxe_interrupt_attach_exit;
}
#if __FreeBSD_version >= 800504
bus_describe_intr(sc->dev, sc->bxe_msix_res[0],
sc->bxe_msix_tag[0], "sp");
#endif
/* Now initialize the fastpath vectors. */
for (i = 0; i < (sc->num_queues); i++) {
fp = &sc->fp[i];
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Enabling MSI-X[%d] vector.\n",
__FUNCTION__, i + 1);
/*
* Setup the interrupt handler. Note that we pass the
* fastpath context to the interrupt handler in this
* case. Also the first msix_res was used by the sp.
*/
rc = bus_setup_intr(sc->dev, sc->bxe_msix_res[i + 1],
INTR_TYPE_NET | INTR_MPSAFE, NULL, bxe_intr_fp,
fp, &sc->bxe_msix_tag[i + 1]);
if (rc) {
BXE_PRINTF(
"%s(%d): Failed to allocate MSI-X[%d] vector!\n",
__FILE__, __LINE__, (i + 1));
goto bxe_interrupt_attach_exit;
}
#if __FreeBSD_version >= 800504
bus_describe_intr(sc->dev, sc->bxe_msix_res[i + 1],
sc->bxe_msix_tag[i + 1], "fp[%02d]", i);
#endif
/* Bind the fastpath instance to a CPU. */
if (sc->num_queues > 1) {
bus_bind_intr(sc->dev,
sc->bxe_msix_res[i + 1], i);
}
#ifdef BXE_TASK
TASK_INIT(&fp->task, 0, bxe_task_fp, fp);
fp->tq = taskqueue_create_fast("bxe_fpq", M_NOWAIT,
taskqueue_thread_enqueue, &fp->tq);
taskqueue_start_threads(&fp->tq, 1, PI_NET, "%s fpq",
device_get_nameunit(sc->dev));
#endif
fp->state = BXE_FP_STATE_IRQ;
}
} else if (sc->msi_count > 0) {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Enabling slowpath MSI[0] vector.\n",
__FUNCTION__);
/*
* Setup the interrupt handler. Note that we pass the driver
* instance to the interrupt handler for the slowpath.
*/
rc = bus_setup_intr(sc->dev,sc->bxe_msi_res[0],
INTR_TYPE_NET | INTR_MPSAFE, NULL, bxe_intr_sp,
sc, &sc->bxe_msi_tag[0]);
if (rc) {
BXE_PRINTF(
"%s(%d): Failed to allocate MSI[0] vector!\n",
__FILE__, __LINE__);
goto bxe_interrupt_attach_exit;
}
#if __FreeBSD_version >= 800504
bus_describe_intr(sc->dev, sc->bxe_msi_res[0],
sc->bxe_msi_tag[0], "sp");
#endif
/* Now initialize the fastpath vectors. */
for (i = 0; i < (sc->num_queues); i++) {
fp = &sc->fp[i];
DBPRINT(sc,
(BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Enabling MSI[%d] vector.\n",
__FUNCTION__, i + 1);
/*
* Setup the interrupt handler. Note that we pass the
* fastpath context to the interrupt handler in this
* case.
*/
rc = bus_setup_intr(sc->dev, sc->bxe_msi_res[i + 1],
INTR_TYPE_NET | INTR_MPSAFE, NULL, bxe_intr_fp,
fp, &sc->bxe_msi_tag[i + 1]);
if (rc) {
BXE_PRINTF(
"%s(%d): Failed to allocate MSI[%d] vector!\n",
__FILE__, __LINE__, (i + 1));
goto bxe_interrupt_attach_exit;
}
#if __FreeBSD_version >= 800504
bus_describe_intr(sc->dev, sc->bxe_msi_res[i + 1],
sc->bxe_msi_tag[i + 1], "fp[%02d]", i);
#endif
#ifdef BXE_TASK
TASK_INIT(&fp->task, 0, bxe_task_fp, fp);
fp->tq = taskqueue_create_fast("bxe_fpq", M_NOWAIT,
taskqueue_thread_enqueue, &fp->tq);
taskqueue_start_threads(&fp->tq, 1, PI_NET, "%s fpq",
device_get_nameunit(sc->dev));
#endif
}
} else {
#ifdef BXE_TASK
fp = &sc->fp[0];
#endif
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Enabling INTx interrupts.\n", __FUNCTION__);
/*
* Setup the interrupt handler. Note that we pass the
* driver instance to the interrupt handler which
* will handle both the slowpath and fastpath.
*/
rc = bus_setup_intr(sc->dev,sc->bxe_irq_res, INTR_TYPE_NET |
INTR_MPSAFE, NULL, bxe_intr_legacy, sc, &sc->bxe_irq_tag);
if (rc) {
BXE_PRINTF("%s(%d): Failed to allocate interrupt!\n",
__FILE__, __LINE__);
goto bxe_interrupt_attach_exit;
}
#ifdef BXE_TASK
TASK_INIT(&fp->task, 0, bxe_task_fp, fp);
fp->tq = taskqueue_create_fast("bxe_fpq",
M_NOWAIT, taskqueue_thread_enqueue, &fp->tq);
taskqueue_start_threads(&fp->tq, 1,
PI_NET, "%s fpq", device_get_nameunit(sc->dev));
#endif
}
bxe_interrupt_attach_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR);
return (rc);
}
/*
* PCI Capabilities Probe Function.
*
* Walks the PCI capabiites list for the device to find what features are
* supported. These capabilites may be enabled/disabled by firmware so it's
* best to walk the list rather than hard code any values.
*
* Returns:
* None.
*/
static void
bxe_probe_pci_caps(struct bxe_softc *sc)
{
device_t dev;
uint32_t reg;
uint16_t link_status;
dev = sc->dev;
DBENTER(BXE_EXTREME_LOAD);
/* Check if PCI Power Management capability is enabled. */
if (pci_find_cap(dev, PCIY_PMG, ®) == 0) {
if (reg != 0) {
DBPRINT(sc, BXE_EXTREME_LOAD,
"%s(): Found PM capability at 0x%04X\n",
__FUNCTION__, reg);
sc->pm_cap = reg;
}
}
/* Check if PCIe capability is enabled. */
if (pci_find_cap(dev, PCIY_EXPRESS, ®) == 0) {
if (reg != 0) {
link_status = pci_read_config(dev, reg + 0x12, 2);
DBPRINT(sc, BXE_EXTREME_LOAD,
"%s(): Found PCIe capability at 0x%04X\n",
__FUNCTION__, reg);
/* Handle PCIe 2.0 workarounds for the 57710. */
if (CHIP_IS_E1(sc)) {
/* Workaround for 57710 errata E4_57710_27462. */
sc->pcie_link_speed =
(REG_RD(sc, 0x3d04) & (1 << 24)) ? 2 : 1;
/* Workaround for 57710 errata E4_57710_27488. */
sc->pcie_link_width = (link_status >> 4) & 0x3f;
if (sc->pcie_link_speed > 1)
sc->pcie_link_width =
((link_status >> 4) & 0x3f) >> 1;
} else {
sc->pcie_link_speed = link_status & 0xf;
sc->pcie_link_width = (link_status >> 4) & 0x3f;
}
sc->bxe_cap_flags |= BXE_PCIE_CAPABLE_FLAG;
sc->pcie_cap = reg;
}
}
/* Check if MSI capability is enabled. */
if (pci_find_cap(dev, PCIY_MSI, ®) == 0) {
if (reg != 0) {
DBPRINT(sc, BXE_EXTREME_LOAD,
"%s(): Found MSI capability at 0x%04X\n",
__FUNCTION__, reg);
sc->bxe_cap_flags |= BXE_MSI_CAPABLE_FLAG;
}
}
/* Check if MSI-X capability is enabled. */
if (pci_find_cap(dev, PCIY_MSIX, ®) == 0) {
if (reg != 0) {
DBPRINT(sc, BXE_EXTREME_LOAD,
"%s(): Found MSI-X capability at 0x%04X\n",
__FUNCTION__, reg);
sc->bxe_cap_flags |= BXE_MSIX_CAPABLE_FLAG;
}
}
DBEXIT(BXE_EXTREME_LOAD);
}
/*
* Setup firmware pointers for BCM57710.
*
* Returns:
* None
*/
static void
bxe_init_e1_firmware(struct bxe_softc *sc)
{
INIT_OPS(sc) = (struct raw_op *)init_ops_e1;
INIT_DATA(sc) = (const uint32_t *)init_data_e1;
INIT_OPS_OFFSETS(sc) = (const uint16_t *)init_ops_offsets_e1;
INIT_TSEM_INT_TABLE_DATA(sc) = tsem_int_table_data_e1;
INIT_TSEM_PRAM_DATA(sc) = tsem_pram_data_e1;
INIT_USEM_INT_TABLE_DATA(sc) = usem_int_table_data_e1;
INIT_USEM_PRAM_DATA(sc) = usem_pram_data_e1;
INIT_XSEM_INT_TABLE_DATA(sc) = xsem_int_table_data_e1;
INIT_XSEM_PRAM_DATA(sc) = xsem_pram_data_e1;
INIT_CSEM_INT_TABLE_DATA(sc) = csem_int_table_data_e1;
INIT_CSEM_PRAM_DATA(sc) = csem_pram_data_e1;
}
/*
* Setup firmware pointers for BCM57711.
*
* Returns:
* None
*/
static void
bxe_init_e1h_firmware(struct bxe_softc *sc)
{
INIT_OPS(sc) = (struct raw_op *)init_ops_e1h;
INIT_DATA(sc) = (const uint32_t *)init_data_e1h;
INIT_OPS_OFFSETS(sc) = (const uint16_t *)init_ops_offsets_e1h;
INIT_TSEM_INT_TABLE_DATA(sc) = tsem_int_table_data_e1h;
INIT_TSEM_PRAM_DATA(sc) = tsem_pram_data_e1h;
INIT_USEM_INT_TABLE_DATA(sc) = usem_int_table_data_e1h;
INIT_USEM_PRAM_DATA(sc) = usem_pram_data_e1h;
INIT_XSEM_INT_TABLE_DATA(sc) = xsem_int_table_data_e1h;
INIT_XSEM_PRAM_DATA(sc) = xsem_pram_data_e1h;
INIT_CSEM_INT_TABLE_DATA(sc) = csem_int_table_data_e1h;
INIT_CSEM_PRAM_DATA(sc) = csem_pram_data_e1h;
}
/*
* Sets up pointers for loading controller firmware.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_init_firmware(struct bxe_softc *sc)
{
int rc;
rc = 0;
if (CHIP_IS_E1(sc))
bxe_init_e1_firmware(sc);
else if (CHIP_IS_E1H(sc))
bxe_init_e1h_firmware(sc);
else {
BXE_PRINTF("%s(%d): No firmware to support chip revision!\n",
__FILE__, __LINE__);
rc = ENXIO;
}
return (rc);
}
static void
bxe_tunables_set(struct bxe_softc *sc)
{
/*
* Get our starting point for interrupt mode/number of queues.
* We will progressively step down from MSI-X to MSI to INTx
* and reduce the number of receive queues as necessary to
* match the system capabilities.
*/
sc->multi_mode = bxe_multi_mode;
sc->int_mode = bxe_int_mode;
sc->tso_enable = bxe_tso_enable;
/*
* Verify the Priority -> Receive Queue mappings.
*/
if (sc->int_mode > 0) {
/* Multi-queue modes require MSI/MSI-X. */
switch (sc->multi_mode) {
case ETH_RSS_MODE_DISABLED:
/* No multi-queue mode requested. */
sc->num_queues = 1;
break;
case ETH_RSS_MODE_REGULAR:
if (sc->int_mode > 1) {
/*
* Assume we can use MSI-X
* (max of 16 receive queues).
*/
sc->num_queues = min((bxe_queue_count ?
bxe_queue_count : mp_ncpus), MAX_CONTEXT);
} else {
/*
* Assume we can use MSI
* (max of 7 receive queues).
*/
sc->num_queues = min((bxe_queue_count ?
bxe_queue_count : mp_ncpus),
BXE_MSI_VECTOR_COUNT - 1);
}
break;
default:
BXE_PRINTF(
"%s(%d): Unsupported multi_mode parameter (%d), "
"disabling multi-queue support!\n", __FILE__,
__LINE__, sc->multi_mode);
sc->multi_mode = ETH_RSS_MODE_DISABLED;
sc->num_queues = 1;
break;
}
} else {
/* User has forced INTx mode. */
sc->multi_mode = ETH_RSS_MODE_DISABLED;
sc->num_queues = 1;
}
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_INTR),
"%s(): Requested: int_mode = %d, multi_mode = %d num_queues = %d\n",
__FUNCTION__, sc->int_mode, sc->multi_mode, sc->num_queues);
sc->stats_enable = TRUE;
/* Select the host coalescing tick count values (limit values). */
if (bxe_tx_ticks > 100) {
BXE_PRINTF("%s(%d): bxe_tx_ticks too large "
"(%d), setting default value of 50.\n",
__FILE__, __LINE__, bxe_tx_ticks);
sc->tx_ticks = 50;
} else
sc->tx_ticks = bxe_tx_ticks;
if (bxe_rx_ticks > 100) {
BXE_PRINTF("%s(%d): bxe_rx_ticks too large "
"(%d), setting default value of 25.\n",
__FILE__, __LINE__, bxe_rx_ticks);
sc->rx_ticks = 25;
} else
sc->rx_ticks = bxe_rx_ticks;
/* Select the PCIe maximum read request size (MRRS). */
if (bxe_mrrs > 3)
sc->mrrs = 3;
else
sc->mrrs = bxe_mrrs;
/* Check for DCC support. */
if (bxe_dcc_enable == FALSE)
sc->dcc_enable = FALSE;
else
sc->dcc_enable = TRUE;
}
/*
* Allocates PCI resources from OS.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_pci_resources_alloc(struct bxe_softc *sc)
{
int rid, rc = 0;
DBENTER(BXE_VERBOSE_LOAD);
/*
* Allocate PCI memory resources for BAR0.
* This includes device registers and internal
* processor memory.
*/
rid = PCIR_BAR(0);
sc->bxe_res = bus_alloc_resource_any(sc->dev,
SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (sc->bxe_res == NULL) {
BXE_PRINTF("%s(%d):PCI BAR0 memory allocation failed\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bxe_pci_resources_alloc_exit;
}
/* Get OS resource handles for BAR0 memory. */
sc->bxe_btag = rman_get_bustag(sc->bxe_res);
sc->bxe_bhandle = rman_get_bushandle(sc->bxe_res);
sc->bxe_vhandle = (vm_offset_t) rman_get_virtual(sc->bxe_res);
/*
* Allocate PCI memory resources for BAR2.
* Doorbell (DB) memory.
*/
rid = PCIR_BAR(2);
sc->bxe_db_res = bus_alloc_resource_any(sc->dev,
SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (sc->bxe_db_res == NULL) {
BXE_PRINTF("%s(%d): PCI BAR2 memory allocation failed\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bxe_pci_resources_alloc_exit;
}
/* Get OS resource handles for BAR2 memory. */
sc->bxe_db_btag = rman_get_bustag(sc->bxe_db_res);
sc->bxe_db_bhandle = rman_get_bushandle(sc->bxe_db_res);
sc->bxe_db_vhandle = (vm_offset_t) rman_get_virtual(sc->bxe_db_res);
bxe_pci_resources_alloc_exit:
DBEXIT(BXE_VERBOSE_LOAD);
return (rc);
}
/*
* Frees PCI resources allocated in bxe_pci_resources_alloc().
*
* Returns:
* None
*/
static void
bxe_pci_resources_free(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_UNLOAD);
/* Release the PCIe BAR0 mapped memory. */
if (sc->bxe_res != NULL) {
bus_release_resource(sc->dev, SYS_RES_MEMORY,
PCIR_BAR(0), sc->bxe_res);
}
/* Release the PCIe BAR2 (doorbell) mapped memory. */
if (sc->bxe_db_res != NULL) {
bus_release_resource(sc->dev, SYS_RES_MEMORY,
PCIR_BAR(2), sc->bxe_db_res);
}
DBENTER(BXE_VERBOSE_UNLOAD);
}
/*
* Determines the media reported to the OS by examining
* the installed PHY type.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_media_detect(struct bxe_softc *sc)
{
int rc;
rc = 0;
/* Identify supported media based on the PHY type. */
switch (XGXS_EXT_PHY_TYPE(sc->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
DBPRINT(sc, BXE_INFO_LOAD,
"%s(): Found 10GBase-CX4 media.\n", __FUNCTION__);
sc->media = IFM_10G_CX4;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
/* Technically 10GBase-KR but report as 10GBase-SR*/
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC:
DBPRINT(sc, BXE_INFO_LOAD,
"%s(): Found 10GBase-SR media.\n", __FUNCTION__);
sc->media = IFM_10G_SR;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
DBPRINT(sc, BXE_INFO_LOAD,
"%s(): Found 10Gb twinax media.\n", __FUNCTION__);
sc->media = IFM_10G_TWINAX;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
DBPRINT(sc, BXE_INFO_LOAD,
"%s(): Found 10GBase-T media.\n", __FUNCTION__);
sc->media = IFM_10G_T;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
default:
sc->media = 0;
rc = ENODEV;
}
return (rc);
}
/*
* Device attach function.
*
* Allocates device resources, performs secondary chip identification,
* resets and initializes the hardware, and initializes driver instance
* variables.
*
* Returns:
* 0 = Success, Positive value on failure.
*/
static int
bxe_attach(device_t dev)
{
struct bxe_softc *sc;
struct ifnet *ifp;
int rc;
sc = device_get_softc(dev);
DBENTER(BXE_INFO_LOAD | BXE_INFO_RESET);
sc->dev = dev;
sc->bxe_unit = device_get_unit(dev);
sc->bxe_func = pci_get_function(dev);
sc->bxe_flags = 0;
sc->state = BXE_STATE_CLOSED;
rc = 0;
DBPRINT(sc, BXE_FATAL, "%s(): ************************\n",
__FUNCTION__);
DBPRINT(sc, BXE_FATAL, "%s(): ** Debug mode enabled **\n",
__FUNCTION__);
DBPRINT(sc, BXE_FATAL, "%s(): ************************\n",
__FUNCTION__);
DBPRINT(sc, BXE_FATAL, "%s(): sc vaddr = 0x%08X:%08X\n",
__FUNCTION__, (uint32_t) U64_HI(sc), (uint32_t) U64_LO(sc));
/* Get the user configurable values for driver load. */
bxe_tunables_set(sc);
bxe_mutexes_alloc(sc);
/* Prepare tick routine. */
callout_init_mtx(&sc->bxe_tick_callout, &sc->bxe_core_mtx, 0);
/* Enable bus master capability */
pci_enable_busmaster(dev);
/* Enable PCI BAR mapped memory for register access. */
rc = bxe_pci_resources_alloc(sc);
if (rc != 0) {
BXE_PRINTF("%s(%d): Error allocating PCI resources!\n",
__FILE__, __LINE__);
goto bxe_attach_fail;
}
/* Put indirect address registers into a sane state. */
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS,
PCICFG_VENDOR_ID_OFFSET, 4);
REG_WR(sc, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(sc) * 16, 0);
REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(sc) * 16, 0);
REG_WR(sc, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(sc) * 16, 0);
REG_WR(sc, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(sc) * 16, 0);
/* Get hardware info from shared memory and validate data. */
rc = bxe_hwinfo_function_get(sc);
if (rc != 0) {
DBPRINT(sc, BXE_WARN,
"%s(): Failed to get hardware info!\n", __FUNCTION__);
goto bxe_attach_fail;
}
/* Setup supported media options. */
rc = bxe_media_detect(sc);
if (rc != 0) {
BXE_PRINTF("%s(%d): Unknown media (PHY) type!\n",
__FILE__, __LINE__);
goto bxe_attach_fail;
}
/* Interface entrypoint for media type/status reporting. */
ifmedia_init(&sc->bxe_ifmedia,
IFM_IMASK, bxe_ifmedia_upd, bxe_ifmedia_status);
/* Default interface values. */
ifmedia_add(&sc->bxe_ifmedia,
IFM_ETHER | sc->media | IFM_FDX, 0, NULL);
ifmedia_add(&sc->bxe_ifmedia,
IFM_ETHER | IFM_AUTO, 0, NULL);
ifmedia_set(&sc->bxe_ifmedia,
IFM_ETHER | IFM_AUTO);
sc->bxe_ifmedia.ifm_media =
sc->bxe_ifmedia.ifm_cur->ifm_media;
/* Setup firmware arrays (firmware load comes later). */
rc = bxe_init_firmware(sc);
if (rc) {
BXE_PRINTF("%s(%d): Error preparing firmware load!\n",
__FILE__, __LINE__);
goto bxe_attach_fail;
}
#ifdef BXE_DEBUG
/* Allocate a memory buffer for grcdump output.*/
sc->grcdump_buffer = malloc(BXE_GRCDUMP_BUF_SIZE, M_TEMP, M_NOWAIT);
if (sc->grcdump_buffer == NULL) {
BXE_PRINTF("%s(%d): Failed to allocate grcdump memory "
"buffer!\n", __FILE__, __LINE__);
rc = ENOBUFS;
}
#endif
/* Check that NVRAM contents are valid.*/
rc = bxe_nvram_test(sc);
if (rc != 0) {
BXE_PRINTF("%s(%d): Failed NVRAM test!\n",
__FILE__, __LINE__);
goto bxe_attach_fail;
}
/* Allocate the appropriate interrupts.*/
rc = bxe_interrupt_alloc(sc);
if (rc != 0) {
BXE_PRINTF("%s(%d): Interrupt allocation failed!\n",
__FILE__, __LINE__);
goto bxe_attach_fail;
}
/* Useful for accessing unconfigured devices (i.e. factory diags).*/
if (nomcp)
sc->bxe_flags |= BXE_NO_MCP_FLAG;
/* If bootcode is not running only initialize port 0. */
if (nomcp && BP_PORT(sc)) {
BXE_PRINTF(
"%s(%d): Second device disabled (no bootcode), "
"exiting...\n", __FILE__, __LINE__);
rc = ENODEV;
goto bxe_attach_fail;
}
/* Check if PXE/UNDI is still active and unload it. */
if (!NOMCP(sc))
bxe_undi_unload(sc);
/*
* Select the RX and TX ring sizes. The actual
* ring size for TX is complicated by the fact
* that a single TX frame may be broken up into
* many buffer descriptors (tx_start_bd,
* tx_parse_bd, tx_data_bd). In the best case,
* there are always at least two BD's required
* so we'll assume the best case here.
*/
sc->tx_ring_size = (USABLE_TX_BD >> 1);
sc->rx_ring_size = USABLE_RX_BD;
/* Assume receive IP/TCP/UDP checksum is enabled. */
/* ToDo: Change when IOCTL changes checksum offload? */
sc->rx_csum = 1;
/* Disable WoL. */
sc->wol = 0;
/* Assume a standard 1500 byte MTU size for mbuf allocations. */
sc->mbuf_alloc_size = MCLBYTES;
/* Allocate DMA memory resources. */
rc = bxe_host_structures_alloc(sc->dev);
if (rc != 0) {
BXE_PRINTF("%s(%d): DMA memory allocation failed!\n",
__FILE__, __LINE__);
goto bxe_attach_fail;
}
/* Allocate a FreeBSD ifnet structure. */
ifp = sc->bxe_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
BXE_PRINTF("%s(%d): Interface allocation failed!\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bxe_attach_fail;
}
/* Initialize the FreeBSD ifnet interface. */
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
/* Written by driver before attach, read-only afterwards. */
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
/* Driver entrypoints from the network interface. */
ifp->if_ioctl = bxe_ioctl;
ifp->if_start = bxe_tx_start;
#if __FreeBSD_version >= 800000
ifp->if_transmit = bxe_tx_mq_start;
ifp->if_qflush = bxe_mq_flush;
#endif
#ifdef FreeBSD8_0
ifp->if_timer = 0;
#endif
ifp->if_init = bxe_init;
ifp->if_mtu = ETHERMTU;
ifp->if_hwassist = BXE_IF_HWASSIST;
ifp->if_capabilities = BXE_IF_CAPABILITIES;
/* TPA not enabled by default. */
ifp->if_capenable = BXE_IF_CAPABILITIES & ~IFCAP_LRO;
ifp->if_baudrate = IF_Gbps(10UL);
ifp->if_snd.ifq_drv_maxlen = sc->tx_ring_size;
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
IFQ_SET_READY(&ifp->if_snd);
/* Attach to the Ethernet interface list. */
ether_ifattach(ifp, sc->link_params.mac_addr);
/* Attach the interrupts to the interrupt handlers. */
rc = bxe_interrupt_attach(sc);
if (rc != 0) {
BXE_PRINTF("%s(%d): Interrupt allocation failed!\n",
__FILE__, __LINE__);
goto bxe_attach_fail;
}
/* Print important adapter info for the user. */
bxe_print_adapter_info(sc);
/* Add the supported sysctls to the kernel. */
bxe_add_sysctls(sc);
bxe_attach_fail:
if (rc != 0)
bxe_detach(dev);
DBEXIT(BXE_INFO_LOAD | BXE_INFO_RESET);
return (rc);
}
/*
* Supported link settings.
*
* Examines hardware configuration present in NVRAM and
* determines the link settings that are supported between
* the external PHY and the switch.
*
* Returns:
* None.
*
* Side effects:
* Sets sc->port.supported
* Sets sc->link_params.phy_addr
*/
static void
bxe_link_settings_supported(struct bxe_softc *sc, uint32_t switch_cfg)
{
uint32_t ext_phy_type;
int port;
DBENTER(BXE_VERBOSE_PHY);
DBPRINT(sc, BXE_VERBOSE_PHY, "%s(): switch_cfg = 0x%08X\n",
__FUNCTION__, switch_cfg);
port = BP_PORT(sc);
/* Get the link settings supported by the external PHY. */
switch (switch_cfg) {
case SWITCH_CFG_1G:
ext_phy_type =
SERDES_EXT_PHY_TYPE(sc->link_params.ext_phy_config);
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): 1G switch w/ ext_phy_type = "
"0x%08X\n", __FUNCTION__, ext_phy_type);
switch (ext_phy_type) {
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
DBPRINT(sc, BXE_VERBOSE_PHY, "%s(): 1G Direct.\n",
__FUNCTION__);
sc->port.supported |=
(SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_2500baseX_Full |
SUPPORTED_TP |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
DBPRINT(sc, BXE_VERBOSE_PHY, "%s(): 1G 5482\n",
__FUNCTION__);
sc->port.supported |=
(SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_TP |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
default:
BXE_PRINTF(
"%s(%d): Bad NVRAM 1Gb PHY configuration data "
"(ext_phy_config=0x%08X).\n",
__FILE__, __LINE__,
sc->link_params.ext_phy_config);
goto bxe_link_settings_supported_exit;
}
sc->port.phy_addr =
REG_RD(sc, NIG_REG_SERDES0_CTRL_PHY_ADDR + (port * 0x10));
DBPRINT(sc, BXE_VERBOSE_PHY, "%s(): phy_addr = 0x%08X\n",
__FUNCTION__, sc->port.phy_addr);
break;
case SWITCH_CFG_10G:
ext_phy_type =
XGXS_EXT_PHY_TYPE(sc->link_params.ext_phy_config);
DBPRINT(
sc, BXE_VERBOSE_PHY,
"%s(): 10G switch w/ ext_phy_type = 0x%08X\n",
__FUNCTION__, ext_phy_type);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): 10G switch w/ direct connect.\n",
__FUNCTION__);
sc->port.supported |=
(SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_TP |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
DBPRINT(sc, BXE_VERBOSE_PHY,
"ext_phy_type 0x%x (8072)\n",ext_phy_type);
sc->port.supported |=
(SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
DBPRINT(sc,
BXE_VERBOSE_PHY,"ext_phy_type 0x%x (8073)\n",
ext_phy_type);
sc->port.supported |=
(SUPPORTED_10000baseT_Full |
SUPPORTED_2500baseX_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): 10G switch w/ 8705.\n",__FUNCTION__);
sc->port.supported |=
(SUPPORTED_10000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): 10G switch w/ 8706.\n",
__FUNCTION__);
sc->port.supported |=
(SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): 10G switch w/ 8726.\n",
__FUNCTION__);
sc->port.supported |=
(SUPPORTED_10000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
DBPRINT(sc, BXE_VERBOSE_PHY,"ext_phy_type 0x%x (8727)\n",
ext_phy_type);
sc->port.supported |=
(SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): 10G switch w/ SFX7101.\n",
__FUNCTION__);
sc->port.supported |=
(SUPPORTED_10000baseT_Full |
SUPPORTED_TP |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
DBPRINT(sc, BXE_VERBOSE_PHY,
"ext_phy_type 0x%x (BCM8481)\n",
ext_phy_type);
sc->port.supported |=
(SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_TP |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
DBPRINT(sc, BXE_WARN,
"%s(): 10G XGXS PHY failure detected.\n",
__FUNCTION__);
break;
BXE_PRINTF(
"%s(%d): Bad NVRAM 10Gb PHY configuration data "
"(ext_phy_config=0x%08X).\n",
__FILE__, __LINE__,
sc->link_params.ext_phy_config);
goto bxe_link_settings_supported_exit;
}
sc->port.phy_addr =
REG_RD(sc, NIG_REG_XGXS0_CTRL_PHY_ADDR +(port * 0x18));
break;
default:
DBPRINT(sc, BXE_WARN, "%s(): BAD switch configuration "
"(link_config = 0x%08X)\n", __FUNCTION__,
sc->port.link_config);
goto bxe_link_settings_supported_exit;
}
sc->link_params.phy_addr = sc->port.phy_addr;
/* Mask out unsupported speeds according to NVRAM. */
if ((sc->link_params.speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) == 0)
sc->port.supported &= ~SUPPORTED_10baseT_Half;
if ((sc->link_params.speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) == 0)
sc->port.supported &= ~SUPPORTED_10baseT_Full;
if ((sc->link_params.speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) == 0)
sc->port.supported &= ~SUPPORTED_100baseT_Half;
if ((sc->link_params.speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) == 0)
sc->port.supported &= ~SUPPORTED_100baseT_Full;
if ((sc->link_params.speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) == 0)
sc->port.supported &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
if ((sc->link_params.speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) == 0)
sc->port.supported &= ~SUPPORTED_2500baseX_Full;
if ((sc->link_params.speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) == 0)
sc->port.supported &= ~SUPPORTED_10000baseT_Full;
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): Supported link settings = 0x%b\n", __FUNCTION__,
sc->port.supported, BXE_SUPPORTED_PRINTFB);
bxe_link_settings_supported_exit:
DBEXIT(BXE_VERBOSE_PHY);
}
/*
* Requested link settings.
*
* Returns:
* None.
*/
static void
bxe_link_settings_requested(struct bxe_softc *sc)
{
uint32_t ext_phy_type;
DBENTER(BXE_VERBOSE_PHY);
sc->link_params.req_duplex = MEDIUM_FULL_DUPLEX;
switch (sc->port.link_config & PORT_FEATURE_LINK_SPEED_MASK) {
case PORT_FEATURE_LINK_SPEED_AUTO:
if (sc->port.supported & SUPPORTED_Autoneg) {
sc->link_params.req_line_speed |= SPEED_AUTO_NEG;
sc->port.advertising = sc->port.supported;
} else {
ext_phy_type = XGXS_EXT_PHY_TYPE(
sc->link_params.ext_phy_config);
if ((ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
(ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
/* Force 10G, no autonegotiation. */
sc->link_params.req_line_speed = SPEED_10000;
sc->port.advertising =
ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE;
break;
}
DBPRINT(sc, BXE_FATAL,
"%s(): NVRAM config error. Invalid "
"link_config (0x%08X) - Autoneg not supported!\n",
__FUNCTION__, sc->port.link_config);
goto bxe_link_settings_requested_exit;
}
break;
case PORT_FEATURE_LINK_SPEED_10M_FULL:
if (sc->port.supported & SUPPORTED_10baseT_Full) {
sc->link_params.req_line_speed = SPEED_10;
sc->port.advertising = ADVERTISED_10baseT_Full |
ADVERTISED_TP;
} else {
DBPRINT(sc, BXE_FATAL,
"%s(): NVRAM config error. Invalid "
"link_config (0x%08X) - speed_cap_mask 0x%08X\n",
__FUNCTION__, sc->port.link_config,
sc->link_params.speed_cap_mask);
goto bxe_link_settings_requested_exit;
}
break;
case PORT_FEATURE_LINK_SPEED_10M_HALF:
if (sc->port.supported & SUPPORTED_10baseT_Half) {
sc->link_params.req_line_speed = SPEED_10;
sc->link_params.req_duplex = MEDIUM_HALF_DUPLEX;
sc->port.advertising = ADVERTISED_10baseT_Half |
ADVERTISED_TP;
} else {
DBPRINT(sc, BXE_FATAL,
"%s(): NVRAM config error. Invalid "
"link_config (0x%08X) - speed_cap_mask = 0x%08X\n",
__FUNCTION__, sc->port.link_config,
sc->link_params.speed_cap_mask);
goto bxe_link_settings_requested_exit;
}
break;
case PORT_FEATURE_LINK_SPEED_100M_FULL:
if (sc->port.supported & SUPPORTED_100baseT_Full) {
sc->link_params.req_line_speed = SPEED_100;
sc->port.advertising = ADVERTISED_100baseT_Full |
ADVERTISED_TP;
} else {
DBPRINT(sc, BXE_FATAL,
"%s(): NVRAM config error. Invalid "
"link_config (0x%08X) - speed_cap_mask = 0x%08X\n",
__FUNCTION__, sc->port.link_config,
sc->link_params.speed_cap_mask);
goto bxe_link_settings_requested_exit;
}
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
if (sc->port.supported & SUPPORTED_100baseT_Half) {
sc->link_params.req_line_speed = SPEED_100;
sc->link_params.req_duplex = MEDIUM_HALF_DUPLEX;
sc->port.advertising = ADVERTISED_100baseT_Half |
ADVERTISED_TP;
} else {
DBPRINT(sc, BXE_FATAL,
"%s(): NVRAM config error. Invalid "
"link_config (0x%08X) - speed_cap_mask = 0x%08X\n",
__FUNCTION__, sc->port.link_config,
sc->link_params.speed_cap_mask);
goto bxe_link_settings_requested_exit;
}
break;
case PORT_FEATURE_LINK_SPEED_1G:
if (sc->port.supported & SUPPORTED_1000baseT_Full) {
sc->link_params.req_line_speed = SPEED_1000;
sc->port.advertising = ADVERTISED_1000baseT_Full |
ADVERTISED_TP;
} else {
DBPRINT(sc, BXE_FATAL,
"%s(): NVRAM config error. Invalid "
"link_config (0x%08X) - speed_cap_mask = 0x%08X\n",
__FUNCTION__, sc->port.link_config,
sc->link_params.speed_cap_mask);
goto bxe_link_settings_requested_exit;
}
break;
case PORT_FEATURE_LINK_SPEED_2_5G:
if (sc->port.supported & SUPPORTED_2500baseX_Full) {
sc->link_params.req_line_speed = SPEED_2500;
sc->port.advertising = ADVERTISED_2500baseX_Full |
ADVERTISED_TP;
} else {
DBPRINT(sc, BXE_FATAL,
"%s(): NVRAM config error. Invalid "
"link_config (0x%08X) - speed_cap_mask = 0x%08X\n",
__FUNCTION__, sc->port.link_config,
sc->link_params.speed_cap_mask);
goto bxe_link_settings_requested_exit;
}
break;
case PORT_FEATURE_LINK_SPEED_10G_CX4:
case PORT_FEATURE_LINK_SPEED_10G_KX4:
case PORT_FEATURE_LINK_SPEED_10G_KR:
if (sc->port.supported & SUPPORTED_10000baseT_Full) {
sc->link_params.req_line_speed = SPEED_10000;
sc->port.advertising = ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE;
} else {
DBPRINT(sc, BXE_FATAL,
"%s(): NVRAM config error. Invalid "
"link_config (0x%08X) - speed_cap_mask = 0x%08X\n",
__FUNCTION__, sc->port.link_config,
sc->link_params.speed_cap_mask);
goto bxe_link_settings_requested_exit;
}
break;
default:
DBPRINT(sc, BXE_FATAL, "%s(): NVRAM config error. BAD link "
"speed - link_config = 0x%08X\n", __FUNCTION__,
sc->port.link_config);
sc->link_params.req_line_speed = 0;
sc->port.advertising = sc->port.supported;
break;
}
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): req_line_speed = %d, req_duplex = %d\n",
__FUNCTION__, sc->link_params.req_line_speed,
sc->link_params.req_duplex);
sc->link_params.req_flow_ctrl =
sc->port.link_config & PORT_FEATURE_FLOW_CONTROL_MASK;
if ((sc->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
!(sc->port.supported & SUPPORTED_Autoneg))
sc->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
DBPRINT(sc, BXE_VERBOSE_PHY,
"%s(): req_flow_ctrl = 0x%08X, advertising = 0x%08X\n",
__FUNCTION__, sc->link_params.req_flow_ctrl,
sc->port.advertising);
bxe_link_settings_requested_exit:
DBEXIT(BXE_VERBOSE_PHY);
}
/*
* Get function specific hardware configuration.
*
* Multiple function devices such as the BCM57711E have configuration
* information that is specific to each PCIe function of the controller.
* The number of PCIe functions is not necessarily the same as the number
* of Ethernet ports supported by the device.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_hwinfo_function_get(struct bxe_softc *sc)
{
uint32_t mac_hi, mac_lo, val;
int func, rc;
DBENTER(BXE_VERBOSE_LOAD);
rc = 0;
func = BP_FUNC(sc);
/* Get the common hardware configuration first. */
bxe_hwinfo_common_get(sc);
/* Assume no outer VLAN/multi-function support. */
sc->e1hov = sc->e1hmf = 0;
/* Get config info for mf enabled devices. */
if (CHIP_IS_E1H(sc)) {
sc->mf_config[BP_E1HVN(sc)] =
SHMEM_RD(sc, mf_cfg.func_mf_config[func].config);
val = (SHMEM_RD(sc, mf_cfg.func_mf_config[func].e1hov_tag) &
FUNC_MF_CFG_E1HOV_TAG_MASK);
if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
sc->e1hov = (uint16_t) val;
sc->e1hmf = 1;
} else {
if (BP_E1HVN(sc)) {
rc = EPERM;
goto bxe_hwinfo_function_get_exit;
}
}
}
if (!NOMCP(sc)) {
bxe_hwinfo_port_get(sc);
sc->fw_seq = SHMEM_RD(sc, func_mb[func].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK;
}
/*
* Fetch the factory configured MAC address for multi function
* devices. If this is not a multi-function device then the MAC
* address was already read in the bxe_hwinfo_port_get() routine.
* The MAC addresses used by the port are not the same as the MAC
* addressed used by the function.
*/
if (IS_E1HMF(sc)) {
mac_hi = SHMEM_RD(sc, mf_cfg.func_mf_config[func].mac_upper);
mac_lo = SHMEM_RD(sc, mf_cfg.func_mf_config[func].mac_lower);
if ((mac_lo == 0) && (mac_hi == 0)) {
BXE_PRINTF("%s(%d): Invalid Ethernet address!\n",
__FILE__, __LINE__);
rc = ENODEV;
} else {
sc->link_params.mac_addr[0] = (u_char)(mac_hi >> 8);
sc->link_params.mac_addr[1] = (u_char)(mac_hi);
sc->link_params.mac_addr[2] = (u_char)(mac_lo >> 24);
sc->link_params.mac_addr[3] = (u_char)(mac_lo >> 16);
sc->link_params.mac_addr[4] = (u_char)(mac_lo >> 8);
sc->link_params.mac_addr[5] = (u_char)(mac_lo);
}
}
bxe_hwinfo_function_get_exit:
DBEXIT(BXE_VERBOSE_LOAD);
return (rc);
}
/*
* Get port specific hardware configuration.
*
* Multiple port devices such as the BCM57710 have configuration
* information that is specific to each Ethernet port of the
* controller. This function reads that configuration
* information from the bootcode's shared memory and saves it
* for future use.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_hwinfo_port_get(struct bxe_softc *sc)
{
int i, port, rc;
uint32_t val, mac_hi, mac_lo;
DBENTER(BXE_VERBOSE_LOAD);
rc = 0;
port = BP_PORT(sc);
sc->link_params.sc = sc;
sc->link_params.port = port;
/* Fetch several configuration values from bootcode shared memory. */
sc->link_params.lane_config =
SHMEM_RD(sc, dev_info.port_hw_config[port].lane_config);
sc->link_params.ext_phy_config =
SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
if (XGXS_EXT_PHY_TYPE(sc->link_params.ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC) {
sc->link_params.ext_phy_config &=
~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
sc->link_params.ext_phy_config |=
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727;
sc->link_params.feature_config_flags |=
FEATURE_CONFIG_BCM8727_NOC;
}
sc->link_params.speed_cap_mask =
SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask);
sc->port.link_config =
SHMEM_RD(sc, dev_info.port_feature_config[port].link_config);
/* Read the XGXS RX/TX preemphasis values. */
for (i = 0; i < 2; i++) {
val = SHMEM_RD(sc,
dev_info.port_hw_config[port].xgxs_config_rx[i<<1]);
sc->link_params.xgxs_config_rx[i << 1] = ((val >> 16) & 0xffff);
sc->link_params.xgxs_config_rx[(i << 1) + 1] = (val & 0xffff);
val = SHMEM_RD(sc,
dev_info.port_hw_config[port].xgxs_config_tx[i<<1]);
sc->link_params.xgxs_config_tx[i << 1] = ((val >> 16) & 0xffff);
sc->link_params.xgxs_config_tx[(i << 1) + 1] = (val & 0xffff);
}
/* Fetch the device configured link settings. */
sc->link_params.switch_cfg = sc->port.link_config &
PORT_FEATURE_CONNECTED_SWITCH_MASK;
bxe_link_settings_supported(sc, sc->link_params.switch_cfg);
bxe_link_settings_requested(sc);
mac_hi = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_upper);
mac_lo = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_lower);
if (mac_lo == 0 && mac_hi == 0) {
BXE_PRINTF("%s(%d): No Ethernet address programmed on the "
"controller!\n", __FILE__, __LINE__);
rc = ENODEV;
} else {
sc->link_params.mac_addr[0] = (u_char)(mac_hi >> 8);
sc->link_params.mac_addr[1] = (u_char)(mac_hi);
sc->link_params.mac_addr[2] = (u_char)(mac_lo >> 24);
sc->link_params.mac_addr[3] = (u_char)(mac_lo >> 16);
sc->link_params.mac_addr[4] = (u_char)(mac_lo >> 8);
sc->link_params.mac_addr[5] = (u_char)(mac_lo);
}
DBEXIT(BXE_VERBOSE_LOAD);
return (rc);
}
/*
* Get common hardware configuration.
*
* Multiple port devices such as the BCM57710 have configuration
* information that is shared between all ports of the Ethernet
* controller. This function reads that configuration
* information from the bootcode's shared memory and saves it
* for future use.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_hwinfo_common_get(struct bxe_softc *sc)
{
uint32_t val;
int rc;
DBENTER(BXE_VERBOSE_LOAD);
rc = 0;
/* Get the chip revision. */
sc->common.chip_id = sc->link_params.chip_id =
((REG_RD(sc, MISC_REG_CHIP_NUM) & 0xffff) << 16) |
((REG_RD(sc, MISC_REG_CHIP_REV) & 0x000f) << 12) |
((REG_RD(sc, MISC_REG_CHIP_METAL) & 0xff) << 4) |
((REG_RD(sc, MISC_REG_BOND_ID) & 0xf));
DBPRINT(sc, BXE_VERBOSE_LOAD, "%s(): chip_id = 0x%08X.\n",
__FUNCTION__, sc->common.chip_id);
val = (REG_RD(sc, 0x2874) & 0x55);
if ((sc->common.chip_id & 0x1) ||
(CHIP_IS_E1(sc) && val) || (CHIP_IS_E1H(sc) && (val == 0x55))) {
sc->bxe_flags |= BXE_ONE_PORT_FLAG;
DBPRINT(sc, BXE_VERBOSE_LOAD, "%s(): Single port device.\n",
__FUNCTION__);
}
/* Identify enabled PCI capabilites (PCIe, MSI-X, etc.). */
bxe_probe_pci_caps(sc);
/* Get the NVRAM size. */
val = REG_RD(sc, MCP_REG_MCPR_NVM_CFG4);
sc->common.flash_size = (NVRAM_1MB_SIZE <<
(val & MCPR_NVM_CFG4_FLASH_SIZE));
DBPRINT(sc, BXE_VERBOSE_LOAD, "%s(): flash_size = 0x%08x (%dKB)\n",
__FUNCTION__, sc->common.flash_size,(sc->common.flash_size >> 10));
/* Find the shared memory base address. */
sc->common.shmem_base = sc->link_params.shmem_base =
REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
sc->common.shmem2_base = REG_RD(sc, MISC_REG_GENERIC_CR_0);
DBPRINT(sc, BXE_VERBOSE_LOAD, "%s(): shmem_base = 0x%08X\n",
__FUNCTION__, sc->common.shmem_base);
/* Make sure the shared memory address is valid. */
if (!sc->common.shmem_base ||
(sc->common.shmem_base < 0xA0000) ||
(sc->common.shmem_base > 0xC0000)) {
BXE_PRINTF("%s(%d): MCP is not active!\n",
__FILE__, __LINE__);
/* ToDo: Remove the NOMCP support. */
sc->bxe_flags |= BXE_NO_MCP_FLAG;
rc = ENODEV;
goto bxe_hwinfo_common_get_exit;
}
/* Make sure the shared memory contents are valid. */
val = SHMEM_RD(sc, validity_map[BP_PORT(sc)]);
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
(SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
BXE_PRINTF("%s(%d): Invalid NVRAM! Bad validity "
"signature.\n", __FILE__, __LINE__);
rc = ENODEV;
goto bxe_hwinfo_common_get_exit;
}
/* Read the device configuration from shared memory. */
sc->common.hw_config =
SHMEM_RD(sc, dev_info.shared_hw_config.config);
sc->link_params.hw_led_mode = ((sc->common.hw_config &
SHARED_HW_CFG_LED_MODE_MASK) >> SHARED_HW_CFG_LED_MODE_SHIFT);
/* Check if we need to override the preemphasis values. */
sc->link_params.feature_config_flags = 0;
val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED)
sc->link_params.feature_config_flags |=
FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
else
sc->link_params.feature_config_flags &=
~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
/* In multifunction mode, we can't support WoL on a VN. */
if (BP_E1HVN(sc) == 0) {
val = REG_RD(sc, PCICFG_OFFSET + PCICFG_PM_CAPABILITY);
sc->bxe_flags |= (val & PCICFG_PM_CAPABILITY_PME_IN_D3_COLD) ?
0 : BXE_NO_WOL_FLAG;
} else
sc->bxe_flags |= BXE_NO_WOL_FLAG;
DBPRINT(sc, BXE_VERBOSE_LOAD, "%s(): %sWoL capable\n", __FUNCTION__,
(sc->bxe_flags & BXE_NO_WOL_FLAG) ? "Not " : "");
/* Check bootcode version */
sc->common.bc_ver = ((SHMEM_RD(sc, dev_info.bc_rev)) >> 8);
if (sc->common.bc_ver < MIN_BXE_BC_VER) {
BXE_PRINTF("%s(%d): Warning: This driver needs bootcode "
"0x%08X but found 0x%08X, please upgrade!\n",
__FILE__, __LINE__, MIN_BXE_BC_VER, sc->common.bc_ver);
rc = ENODEV;
goto bxe_hwinfo_common_get_exit;
}
bxe_hwinfo_common_get_exit:
DBEXIT(BXE_VERBOSE_LOAD);
return (rc);
}
/*
* Remove traces of PXE boot by forcing UNDI driver unload.
*
* Returns:
* None.
*/
static void
bxe_undi_unload(struct bxe_softc *sc)
{
uint32_t reset_code, swap_en, swap_val, val;
int func;
DBENTER(BXE_VERBOSE_LOAD);
/* Check if there is any driver already loaded */
val = REG_RD(sc, MISC_REG_UNPREPARED);
if (val == 0x1) {
/* Check if it is the UNDI driver. */
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_UNDI);
val = REG_RD(sc, DORQ_REG_NORM_CID_OFST);
if (val == 0x7) {
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
func = BP_FUNC(sc);
DBPRINT(sc, BXE_WARN,
"%s(): UNDI is active! Resetting the device.\n",
__FUNCTION__);
/* Clear the UNDI indication. */
REG_WR(sc, DORQ_REG_NORM_CID_OFST, 0);
/* Try to unload UNDI on port 0. */
sc->bxe_func = 0;
sc->fw_seq = (SHMEM_RD(sc,
func_mb[sc->bxe_func].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
reset_code = bxe_fw_command(sc, reset_code);
/* Check if UNDI is active on port 1. */
if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
/* Send "done" for previous unload. */
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE);
/* Now unload on port 1. */
sc->bxe_func = 1;
sc->fw_seq = (SHMEM_RD(sc,
func_mb[sc->bxe_func].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
bxe_fw_command(sc, reset_code);
}
/* It's now safe to release the lock. */
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_UNDI);
REG_WR(sc, (BP_PORT(sc) ? HC_REG_CONFIG_1 :
HC_REG_CONFIG_0), 0x1000);
REG_WR(sc, (BP_PORT(sc) ?
NIG_REG_LLH1_BRB1_DRV_MASK :
NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
REG_WR(sc, (BP_PORT(sc) ?
NIG_REG_LLH1_BRB1_NOT_MCP :
NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
/* Clear AEU. */
REG_WR(sc, (BP_PORT(sc) ?
MISC_REG_AEU_MASK_ATTN_FUNC_1 :
MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
DELAY(10000);
/* Save NIG port swap information. */
swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
swap_en = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
/* Reset the controller. */
REG_WR(sc, GRCBASE_MISC +
MISC_REGISTERS_RESET_REG_1_CLEAR, 0xd3ffffff);
REG_WR(sc, GRCBASE_MISC +
MISC_REGISTERS_RESET_REG_2_CLEAR, 0x00001403);
/* Take the NIG out of reset and restore swap values.*/
REG_WR(sc, GRCBASE_MISC +
MISC_REGISTERS_RESET_REG_1_SET,
MISC_REGISTERS_RESET_REG_1_RST_NIG);
REG_WR(sc, NIG_REG_PORT_SWAP, swap_val);
REG_WR(sc, NIG_REG_STRAP_OVERRIDE, swap_en);
/* Send completion message to the MCP. */
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE);
/*
* Restore our function and firmware sequence counter.
*/
sc->bxe_func = func;
sc->fw_seq = (SHMEM_RD(sc,
func_mb[sc->bxe_func].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
} else
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_UNDI);
}
DBEXIT(BXE_VERBOSE_LOAD);
}
/*
* Device detach function.
*
* Stops the controller, resets the controller, and releases resources.
*
* Returns:
* 0 on success, !0 = failure.
*/
static int
bxe_detach(device_t dev)
{
struct bxe_softc *sc;
struct ifnet *ifp;
int rc;
sc = device_get_softc(dev);
DBENTER(BXE_INFO_UNLOAD);
rc = 0;
ifp = sc->bxe_ifp;
if (ifp != NULL && ifp->if_vlantrunk != NULL) {
BXE_PRINTF("%s(%d): Cannot detach while VLANs are in use.\n",
__FILE__, __LINE__);
rc = EBUSY;
goto bxe_detach_exit;
}
/* Stop and reset the controller if it was open. */
if (sc->state != BXE_STATE_CLOSED) {
BXE_CORE_LOCK(sc);
rc = bxe_stop_locked(sc, UNLOAD_CLOSE);
BXE_CORE_UNLOCK(sc);
}
#ifdef BXE_DEBUG
/* Free memory buffer for grcdump output.*/
if (sc->grcdump_buffer != NULL)
free(sc->grcdump_buffer, M_TEMP);
#endif
/* Clean-up any remaining interrupt resources. */
bxe_interrupt_detach(sc);
bxe_interrupt_free(sc);
/* Release the network interface. */
if (ifp != NULL)
ether_ifdetach(ifp);
ifmedia_removeall(&sc->bxe_ifmedia);
/* Release all remaining resources. */
bxe_release_resources(sc);
/* Free all PCI resources. */
bxe_pci_resources_free(sc);
pci_disable_busmaster(dev);
bxe_mutexes_free(sc);
bxe_detach_exit:
DBEXIT(BXE_INFO_UNLOAD);
return(0);
}
/*
* Setup a leading connection for the controller.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_setup_leading(struct bxe_softc *sc)
{
int rc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_RAMROD);
DBPRINT(sc, BXE_VERBOSE_LOAD, "%s(): Setup leading connection "
"on fp[00].\n", __FUNCTION__);
/* Reset IGU state for the leading connection. */
bxe_ack_sb(sc, sc->fp[0].sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
/* Post a PORT_SETUP ramrod and wait for completion. */
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_PORT_SETUP, 0, 0, 0, 0);
/* Wait for the ramrod to complete on the leading connection. */
rc = bxe_wait_ramrod(sc, BXE_STATE_OPEN, 0, &(sc->state), 1);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_RAMROD);
return (rc);
}
/*
* Stop the leading connection on the controller.
*
* Returns:
* None.
*/
static int
bxe_stop_leading(struct bxe_softc *sc)
{
uint16_t dsb_sp_prod_idx;
int rc, timeout;
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET |
BXE_VERBOSE_UNLOAD), "%s(): Stop client connection "
"on fp[00].\n", __FUNCTION__);
/* Send the ETH_HALT ramrod. */
sc->fp[0].state = BXE_FP_STATE_HALTING;
bxe_sp_post(sc,RAMROD_CMD_ID_ETH_HALT, 0, 0, sc->fp[0].cl_id, 0);
/* Poll for the ETH_HALT ramrod on the leading connection. */
rc = bxe_wait_ramrod(sc, BXE_FP_STATE_HALTED,
0, &(sc->fp[0].state), 1);
if (rc) {
DBPRINT(sc, BXE_FATAL, "%s(): Timeout waiting for "
"STATE_HALTED ramrod completion!\n", __FUNCTION__);
goto bxe_stop_leading_exit;
}
/* Get the default status block SP producer index. */
dsb_sp_prod_idx = *sc->dsb_sp_prod;
/* After HALT we send PORT_DELETE ramrod. */
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1);
/* Be patient but don't wait forever. */
timeout = 500;
while (dsb_sp_prod_idx == *sc->dsb_sp_prod) {
if (timeout == 0) {
DBPRINT(sc, BXE_FATAL, "%s(): Timeout waiting for "
"PORT_DEL ramrod completion!\n", __FUNCTION__);
rc = EBUSY;
break;
}
timeout--;
DELAY(1000);
rmb();
}
/* Update the adapter and connection states. */
sc->state = BXE_STATE_CLOSING_WAIT4_UNLOAD;
sc->fp[0].state = BXE_FP_STATE_CLOSED;
bxe_stop_leading_exit:
return (rc);
}
/*
* Setup a client connection when using multi-queue/RSS.
*
* Returns:
* Nothing.
*/
static int
bxe_setup_multi(struct bxe_softc *sc, int index)
{
struct bxe_fastpath *fp;
int rc;
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET |
BXE_VERBOSE_UNLOAD), "%s(): Setup client connection "
"on fp[%02d].\n", __FUNCTION__, index);
fp = &sc->fp[index];
/* Reset IGU state. */
bxe_ack_sb(sc, fp->sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
/* Post a CLIENT_SETUP ramrod. */
fp->state = BXE_FP_STATE_OPENING;
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_CLIENT_SETUP, index, 0, fp->cl_id, 0);
/* Wait for the ramrod to complete. */
rc = bxe_wait_ramrod(sc, BXE_FP_STATE_OPEN, index, &fp->state, 1);
return (rc);
}
/*
* Stop a client connection.
*
* Stops an individual client connection on the device. Use
* bxe_stop_leading() for the first/default connection.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_stop_multi(struct bxe_softc *sc, int index)
{
struct bxe_fastpath *fp;
int rc;
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET |
BXE_VERBOSE_UNLOAD), "%s(): Stop client connection "
"on fp[%02d].\n", __FUNCTION__, index);
fp = &sc->fp[index];
/* Halt the client connection. */
fp->state = BXE_FP_STATE_HALTING;
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_HALT, index, 0, fp->cl_id, 0);
/* Wait for the HALT ramrod completion. */
rc = bxe_wait_ramrod(sc, BXE_FP_STATE_HALTED, index, &fp->state, 1);
if (rc){
BXE_PRINTF("%s(%d): fp[%02d] client ramrod halt failed!\n",
__FILE__, __LINE__, index);
goto bxe_stop_multi_exit;
}
/* Delete the CFC entry. */
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_CFC_DEL, index, 0, 0, 1);
/* Poll for the DELETE ramrod completion. */
rc = bxe_wait_ramrod(sc, BXE_FP_STATE_CLOSED, index, &fp->state, 1);
bxe_stop_multi_exit:
return (rc);
}
/*
* Hardware lock for shared, dual-port PHYs.
*
* Returns:
* None.
*/
static void
bxe_acquire_phy_lock(struct bxe_softc *sc)
{
uint32_t ext_phy_type;
DBENTER(BXE_VERBOSE_PHY);
ext_phy_type = XGXS_EXT_PHY_TYPE(sc->link_params.ext_phy_config);
switch(ext_phy_type){
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_MDIO);
break;
default:
break;
}
DBEXIT(BXE_VERBOSE_PHY);
}
/*
* Hardware unlock for shared, dual-port PHYs.
*
* Returns:
* None.
*/
static void
bxe_release_phy_lock(struct bxe_softc *sc)
{
uint32_t ext_phy_type;
DBENTER(BXE_VERBOSE_PHY);
ext_phy_type = XGXS_EXT_PHY_TYPE(sc->link_params.ext_phy_config);
switch(ext_phy_type){
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_MDIO);
break;
default:
break;
}
DBEXIT(BXE_VERBOSE_PHY);
}
/*
*
* Returns:
* None.
*/
static void
bxe__link_reset(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_PHY);
if (!NOMCP(sc)) {
bxe_acquire_phy_lock(sc);
bxe_link_reset(&sc->link_params, &sc->link_vars, 1);
bxe_release_phy_lock(sc);
} else {
DBPRINT(sc, BXE_WARN,
"%s(): Bootcode is not running, not resetting link!\n",
__FUNCTION__);
}
DBEXIT(BXE_VERBOSE_PHY);
}
/*
* Stop the controller.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_stop_locked(struct bxe_softc *sc, int unload_mode)
{
struct ifnet *ifp;
struct mac_configuration_cmd *config;
struct bxe_fastpath *fp;
uint32_t reset_code;
uint32_t emac_base, val;
uint8_t entry, *mac_addr;
int count, i, port, rc;
DBENTER(BXE_INFO_LOAD | BXE_INFO_RESET | BXE_INFO_UNLOAD);
ifp = sc->bxe_ifp;
port = BP_PORT(sc),
rc = reset_code = 0;
BXE_CORE_LOCK_ASSERT(sc);
/* Stop the periodic tick. */
callout_stop(&sc->bxe_tick_callout);
sc->state = BXE_STATE_CLOSING_WAIT4_HALT;
/* Prevent any further RX traffic. */
sc->rx_mode = BXE_RX_MODE_NONE;
bxe_set_storm_rx_mode(sc);
/* Tell the stack the driver is stopped and TX queue is full. */
if (ifp != NULL)
ifp->if_drv_flags = 0;
/* Tell the bootcode to stop watching for a heartbeat. */
SHMEM_WR(sc, func_mb[BP_FUNC(sc)].drv_pulse_mb,
(DRV_PULSE_ALWAYS_ALIVE | sc->fw_drv_pulse_wr_seq));
/* Stop the statistics updates. */
bxe_stats_handle(sc, STATS_EVENT_STOP);
/* Wait until all TX fastpath tasks have completed. */
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
if (fp == NULL || fp->tx_pkt_cons_sb == NULL)
break;
count = 1000;
while (bxe_has_tx_work(fp)) {
bxe_txeof(fp);
if (count == 0) {
BXE_PRINTF(
"%s(%d): Timeout wating for fp[%02d] transmits to complete!\n",
__FILE__, __LINE__, i);
break;
}
count--;
DELAY(1000);
rmb();
}
}
/* Wait until all slowpath tasks have completed. */
count = 1000;
while ((sc->spq_left != MAX_SPQ_PENDING) && count--)
DELAY(1000);
/* Disable Interrupts */
bxe_int_disable(sc);
DELAY(1000);
/* Clear the MAC addresses. */
if (CHIP_IS_E1(sc)) {
config = BXE_SP(sc, mcast_config);
bxe_set_mac_addr_e1(sc, 0);
for (i = 0; i < config->hdr.length; i++)
CAM_INVALIDATE(&config->config_table[i]);
config->hdr.length = i;
config->hdr.offset = BXE_MAX_MULTICAST * (1 + port);
config->hdr.client_id = BP_CL_ID(sc);
config->hdr.reserved1 = 0;
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_SET_MAC, 0,
U64_HI(BXE_SP_MAPPING(sc, mcast_config)),
U64_LO(BXE_SP_MAPPING(sc, mcast_config)), 0);
} else {
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
bxe_set_mac_addr_e1h(sc, 0);
for (i = 0; i < MC_HASH_SIZE; i++)
REG_WR(sc, MC_HASH_OFFSET(sc, i), 0);
REG_WR(sc, MISC_REG_E1HMF_MODE, 0);
}
/* Determine if any WoL settings needed. */
if (unload_mode == UNLOAD_NORMAL)
/* Driver initiatied WoL is disabled. */
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
else if (sc->bxe_flags & BXE_NO_WOL_FLAG) {
/* Driver initiated WoL is disabled, use OOB WoL settings. */
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
if (CHIP_IS_E1H(sc))
REG_WR(sc, MISC_REG_E1HMF_MODE, 0);
} else if (sc->wol) {
emac_base = BP_PORT(sc) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
mac_addr = sc->link_params.mac_addr;
entry = (BP_E1HVN(sc) + 1) * 8;
val = (mac_addr[0] << 8) | mac_addr[1];
EMAC_WR(sc, EMAC_REG_EMAC_MAC_MATCH + entry, val);
val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
(mac_addr[4] << 8) | mac_addr[5];
EMAC_WR(sc, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
} else {
/* Prevent WoL. */
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
}
/* Stop all non-leading client connections. */
for (i = 1; i < sc->num_queues; i++) {
if (bxe_stop_multi(sc, i)){
goto bxe_stop_locked_exit;
}
}
/* Stop the leading client connection. */
rc = bxe_stop_leading(sc);
DELAY(10000);
bxe_stop_locked_exit:
if (NOMCP(sc)) {
DBPRINT(sc, BXE_INFO,
"%s(): Old No MCP load counts: %d, %d, %d\n",
__FUNCTION__, load_count[0], load_count[1], load_count[2]);
load_count[0]--;
load_count[1 + port]--;
DBPRINT(sc, BXE_INFO,
"%s(): New No MCP load counts: %d, %d, %d\n",
__FUNCTION__, load_count[0], load_count[1], load_count[2]);
if (load_count[0] == 0)
reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
else if (load_count[1 + BP_PORT(sc)] == 0)
reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
else
reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
} else {
/* Tell MCP driver unload is complete. */
reset_code = bxe_fw_command(sc, reset_code);
}
if ((reset_code == FW_MSG_CODE_DRV_UNLOAD_COMMON) ||
(reset_code == FW_MSG_CODE_DRV_UNLOAD_PORT))
bxe__link_reset(sc);
DELAY(10000);
/* Reset the chip */
bxe_reset_chip(sc, reset_code);
DELAY(10000);
/* Report UNLOAD_DONE to MCP */
if (!NOMCP(sc))
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE);
sc->port.pmf = 0;
/* Free RX chains and buffers. */
bxe_clear_rx_chains(sc);
/* Free TX chains and buffers. */
bxe_clear_tx_chains(sc);
sc->state = BXE_STATE_CLOSED;
bxe_ack_int(sc);
DBEXIT(BXE_INFO_LOAD | BXE_INFO_RESET |BXE_INFO_UNLOAD);
return (rc);
}
/*
* Device shutdown function.
*
* Stops and resets the controller.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_shutdown(device_t dev)
{
struct bxe_softc *sc;
sc = device_get_softc(dev);
DBENTER(BXE_INFO_LOAD | BXE_INFO_RESET | BXE_INFO_UNLOAD);
BXE_CORE_LOCK(sc);
bxe_stop_locked(sc, UNLOAD_NORMAL);
BXE_CORE_UNLOCK(sc);
DBEXIT(BXE_INFO_LOAD | BXE_INFO_RESET | BXE_INFO_UNLOAD);
return (0);
}
/*
* Prints out link speed and duplex setting to console.
*
* Returns:
* None.
*/
static void
bxe_link_report(struct bxe_softc *sc)
{
uint32_t line_speed;
uint16_t vn_max_rate;
DBENTER(BXE_VERBOSE_PHY);
if (sc->link_vars.link_up) {
/* Report the link status change to OS. */
if (sc->state == BXE_STATE_OPEN)
if_link_state_change(sc->bxe_ifp, LINK_STATE_UP);
line_speed = sc->link_vars.line_speed;
if (IS_E1HMF(sc)){
vn_max_rate = ((sc->mf_config[BP_E1HVN(sc)] &
FUNC_MF_CFG_MAX_BW_MASK) >>
FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
if (vn_max_rate < line_speed)
line_speed = vn_max_rate;
}
BXE_PRINTF("Link is up, %d Mbps, ", line_speed);
if (sc->link_vars.duplex == MEDIUM_FULL_DUPLEX)
printf("full duplex");
else
printf("half duplex");
if (sc->link_vars.flow_ctrl) {
if (sc->link_vars.flow_ctrl & FLOW_CTRL_RX) {
printf(", receive ");
if (sc->link_vars.flow_ctrl & FLOW_CTRL_TX)
printf("& transmit ");
} else
printf(", transmit ");
printf("flow control ON");
}
printf("\n");
} else {
/* Report the link down */
BXE_PRINTF("Link is down\n");
if_link_state_change(sc->bxe_ifp, LINK_STATE_DOWN);
}
DBEXIT(BXE_VERBOSE_PHY);
}
/*
*
* Returns:
* None.
*/
static void
bxe__link_status_update(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_PHY);
if (sc->stats_enable == FALSE || sc->state != BXE_STATE_OPEN)
return;
bxe_link_status_update(&sc->link_params, &sc->link_vars);
if (sc->link_vars.link_up)
bxe_stats_handle(sc, STATS_EVENT_LINK_UP);
else
bxe_stats_handle(sc, STATS_EVENT_STOP);
bxe_read_mf_cfg(sc);
/* Indicate link status. */
bxe_link_report(sc);
DBEXIT(BXE_VERBOSE_PHY);
}
/*
* Calculate flow control to advertise during autonegotiation.
*
* Returns:
* None.
*/
static void
bxe_calc_fc_adv(struct bxe_softc *sc)
{
DBENTER(BXE_EXTREME_PHY);
switch (sc->link_vars.ieee_fc &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
sc->port.advertising &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
sc->port.advertising |= (ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
sc->port.advertising |= ADVERTISED_Asym_Pause;
break;
default:
sc->port.advertising &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
}
DBEXIT(BXE_EXTREME_PHY);
}
/*
*
* Returns:
*
*/
static uint8_t
bxe_initial_phy_init(struct bxe_softc *sc)
{
uint8_t rc;
DBENTER(BXE_VERBOSE_PHY);
rc = 0;
if (!NOMCP(sc)) {
/*
* It is recommended to turn off RX flow control for 5771x
* when using jumbo frames for better performance.
*/
if (!IS_E1HMF(sc) && (sc->mbuf_alloc_size > 5000))
sc->link_params.req_fc_auto_adv = FLOW_CTRL_TX;
else
sc->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
bxe_acquire_phy_lock(sc);
rc = bxe_phy_init(&sc->link_params, &sc->link_vars);
bxe_release_phy_lock(sc);
bxe_calc_fc_adv(sc);
if (sc->link_vars.link_up) {
bxe_stats_handle(sc,STATS_EVENT_LINK_UP);
bxe_link_report(sc);
}
} else {
DBPRINT(sc, BXE_FATAL, "%s(): Bootcode is not running, "
"not initializing link!\n", __FUNCTION__);
rc = EINVAL;
}
DBEXIT(BXE_VERBOSE_PHY);
return (rc);
}
#if __FreeBSD_version >= 800000
/*
* Allocate buffer rings used for multiqueue.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_alloc_buf_rings(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i, rc;
DBENTER(BXE_VERBOSE_LOAD);
rc = 0;
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
if (fp != NULL) {
fp->br = buf_ring_alloc(BXE_BR_SIZE,
M_DEVBUF, M_DONTWAIT, &fp->mtx);
if (fp->br == NULL) {
rc = ENOMEM;
goto bxe_alloc_buf_rings_exit;
}
} else
BXE_PRINTF("%s(%d): Bug!\n", __FILE__, __LINE__);
}
bxe_alloc_buf_rings_exit:
DBEXIT(BXE_VERBOSE_LOAD);
return (rc);
}
/*
* Releases buffer rings used for multiqueue.
*
* Returns:
* None
*/
static void
bxe_free_buf_rings(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i;
DBENTER(BXE_VERBOSE_UNLOAD);
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
if (fp != NULL) {
if (fp->br != NULL)
buf_ring_free(fp->br, M_DEVBUF);
}
}
DBEXIT(BXE_VERBOSE_UNLOAD);
}
#endif
/*
* Handles controller initialization.
*
* Must be called from a locked routine. Since this code
* may be called from the OS it does not provide a return
* error value and must clean-up it's own mess.
*
* Returns:
* Nothing.
*/
static void
bxe_init_locked(struct bxe_softc *sc, int load_mode)
{
struct ifnet *ifp;
uint32_t load_code;
int error, i, port;
DBENTER(BXE_INFO_LOAD | BXE_INFO_RESET);
BXE_CORE_LOCK_ASSERT(sc);
ifp = sc->bxe_ifp;
/* Skip if we're in panic mode. */
if (sc->panic) {
DBPRINT(sc, BXE_WARN, "%s(): Panic mode enabled, exiting!\n",
__FUNCTION__);
goto bxe_init_locked_exit;
}
/* Check if the driver is still running and bail out if it is. */
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
DBPRINT(sc, BXE_WARN,
"%s(): Init called while driver is running!\n",
__FUNCTION__);
goto bxe_init_locked_exit;
}
/*
* Send LOAD_REQUEST command to MCP.
* The MCP will return the type of LOAD
* the driver should perform.
* - If it is the first port to be initialized
* then all common blocks should be initialized.
* - If it is not the first port to be initialized
* then don't do the common block initialization.
*/
sc->state = BXE_STATE_OPENING_WAIT4_LOAD;
if (NOMCP(sc)) {
port = BP_PORT(sc);
DBPRINT(sc, BXE_INFO,
"%s(): Old No MCP load counts: %d, %d, %d\n",
__FUNCTION__,
load_count[0], load_count[1], load_count[2]);
load_count[0]++;
load_count[1 + port]++;
DBPRINT(sc, BXE_INFO,
"%s(): New No MCP load counts: %d, %d, %d\n",
__FUNCTION__,
load_count[0], load_count[1], load_count[2]);
/* No MCP to tell us what to do. */
if (load_count[0] == 1)
load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
else if (load_count[1 + port] == 1)
load_code = FW_MSG_CODE_DRV_LOAD_PORT;
else
load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
} else {
/* Ask the MCP what type of initialization we need to do. */
load_code = bxe_fw_command(sc, DRV_MSG_CODE_LOAD_REQ);
if ((load_code == 0) ||
(load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)) {
BXE_PRINTF("%s(%d): Bootcode refused load request.!\n",
__FILE__, __LINE__);
goto bxe_init_locked_failed1;
}
}
/* Keep track of whether we are controlling the port. */
if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
(load_code == FW_MSG_CODE_DRV_LOAD_PORT))
sc->port.pmf = 1;
else
sc->port.pmf = 0;
/* Block any interrupts until we're ready. */
sc->intr_sem = 1;
/* Initialize hardware. */
error = bxe_init_hw(sc, load_code);
if (error != 0){
BXE_PRINTF("%s(%d): Hardware initialization failed, "
"aborting!\n", __FILE__, __LINE__);
goto bxe_init_locked_failed1;
}
/* Calculate and save the Ethernet MTU size. */
sc->port.ether_mtu = ifp->if_mtu + ETHER_HDR_LEN +
(ETHER_VLAN_ENCAP_LEN * 2) + ETHER_CRC_LEN + 4;
DBPRINT(sc, BXE_INFO, "%s(): Setting MTU = %d\n",
__FUNCTION__, sc->port.ether_mtu);
/* Setup the mbuf allocation size for RX frames. */
if (sc->port.ether_mtu <= MCLBYTES)
sc->mbuf_alloc_size = MCLBYTES;
else if (sc->port.ether_mtu <= PAGE_SIZE)
sc->mbuf_alloc_size = PAGE_SIZE;
else
sc->mbuf_alloc_size = MJUM9BYTES;
DBPRINT(sc, BXE_INFO, "%s(): mbuf_alloc_size = %d, "
"max_frame_size = %d\n", __FUNCTION__,
sc->mbuf_alloc_size, sc->port.ether_mtu);
/* Setup NIC internals and enable interrupts. */
error = bxe_init_nic(sc, load_code);
if (error != 0) {
BXE_PRINTF("%s(%d): NIC initialization failed, "
"aborting!\n", __FILE__, __LINE__);
goto bxe_init_locked_failed1;
}
if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) &&
(sc->common.shmem2_base)){
if (sc->dcc_enable == TRUE) {
BXE_PRINTF("Enabing DCC support\n");
SHMEM2_WR(sc, dcc_support,
(SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV |
SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV));
}
}
#if __FreeBSD_version >= 800000
/* Allocate buffer rings for multiqueue operation. */
error = bxe_alloc_buf_rings(sc);
if (error != 0) {
BXE_PRINTF("%s(%d): Buffer ring initialization failed, "
"aborting!\n", __FILE__, __LINE__);
goto bxe_init_locked_failed1;
}
#endif
/* Tell MCP that driver load is done. */
if (!NOMCP(sc)) {
load_code = bxe_fw_command(sc, DRV_MSG_CODE_LOAD_DONE);
if (!load_code) {
BXE_PRINTF("%s(%d): Driver load failed! No MCP "
"response to LOAD_DONE!\n", __FILE__, __LINE__);
goto bxe_init_locked_failed2;
}
}
sc->state = BXE_STATE_OPENING_WAIT4_PORT;
/* Enable ISR for PORT_SETUP ramrod. */
sc->intr_sem = 0;
/* Setup the leading connection for the controller. */
error = bxe_setup_leading(sc);
if (error != 0) {
DBPRINT(sc, BXE_FATAL, "%s(): Initial PORT_SETUP ramrod "
"failed. State is not OPEN!\n", __FUNCTION__);
goto bxe_init_locked_failed3;
}
if (CHIP_IS_E1H(sc)) {
if (sc->mf_config[BP_E1HVN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
BXE_PRINTF("Multi-function mode is disabled\n");
/* sc->state = BXE_STATE_DISABLED; */
}
/* Setup additional client connections for RSS/multi-queue */
if (sc->state == BXE_STATE_OPEN) {
for (i = 1; i < sc->num_queues; i++) {
if (bxe_setup_multi(sc, i)) {
DBPRINT(sc, BXE_FATAL,
"%s(): fp[%02d] CLIENT_SETUP ramrod failed! State not OPEN!\n",
__FUNCTION__, i);
goto bxe_init_locked_failed4;
}
}
}
}
DELAY(5000);
bxe_int_enable(sc);
DELAY(5000);
/* Initialize statistics. */
bxe_stats_init(sc);
DELAY(1000);
/* Load our MAC address. */
bcopy(IF_LLADDR(sc->bxe_ifp), sc->link_params.mac_addr, ETHER_ADDR_LEN);
if (CHIP_IS_E1(sc))
bxe_set_mac_addr_e1(sc, 1);
else
bxe_set_mac_addr_e1h(sc, 1);
DELAY(1000);
/* Perform PHY initialization for the primary port. */
if (sc->port.pmf)
bxe_initial_phy_init(sc);
DELAY(1000);
/* Start fastpath. */
switch (load_mode) {
case LOAD_NORMAL:
case LOAD_OPEN:
/* Initialize the receive filters. */
bxe_set_rx_mode(sc);
break;
case LOAD_DIAG:
/* Initialize the receive filters. */
bxe_set_rx_mode(sc);
sc->state = BXE_STATE_DIAG;
break;
default:
DBPRINT(sc, BXE_WARN, "%s(): Unknown load mode (%d)!\n",
__FUNCTION__, load_mode);
break;
}
if (!sc->port.pmf)
bxe__link_status_update(sc);
DELAY(1000);
/* Tell the stack the driver is running. */
ifp->if_drv_flags = IFF_DRV_RUNNING;
/* Schedule our periodic timer tick. */
callout_reset(&sc->bxe_tick_callout, hz, bxe_tick, sc);
/* Everything went OK, go ahead and exit. */
goto bxe_init_locked_exit;
bxe_init_locked_failed4:
/* Try and gracefully shutdown the device because of a failure. */
for (i = 1; i < sc->num_queues; i++)
bxe_stop_multi(sc, i);
bxe_init_locked_failed3:
bxe_stop_leading(sc);
bxe_stats_handle(sc, STATS_EVENT_STOP);
bxe_init_locked_failed2:
bxe_int_disable(sc);
bxe_init_locked_failed1:
if (!NOMCP(sc)) {
bxe_fw_command(sc, DRV_MSG_CODE_LOAD_DONE);
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
bxe_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE);
}
sc->port.pmf = 0;
#if __FreeBSD_version >= 800000
bxe_free_buf_rings(sc);
#endif
DBPRINT(sc, BXE_WARN, "%s(): Initialization failed!\n", __FUNCTION__);
bxe_init_locked_exit:
DBEXIT(BXE_INFO_LOAD | BXE_INFO_RESET);
}
/*
* Ramrod wait function.
*
* Waits for a ramrod command to complete.
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_wait_ramrod(struct bxe_softc *sc, int state, int idx, int *state_p,
int poll)
{
int rc, timeout;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_RAMROD);
DBPRINT(sc, BXE_VERBOSE_RAMROD, "%s(): %s for state 0x%08X on "
"fp[%02d], currently 0x%08X.\n", __FUNCTION__,
poll ? "Polling" : "Waiting", state, idx, *state_p);
rc = 0;
timeout = 5000;
while (timeout) {
/* Manually check for the completion. */
if (poll) {
bxe_rxeof(sc->fp);
/*
* Some commands don't use the leading client
* connection.
*/
if (idx)
bxe_rxeof(&sc->fp[idx]);
}
/* State may be changed by bxe_sp_event(). */
mb();
if (*state_p == state)
goto bxe_wait_ramrod_exit;
timeout--;
/* Pause 1ms before checking again. */
DELAY(1000);
}
/* We timed out polling for a completion. */
DBPRINT(sc, BXE_FATAL, "%s(): Timeout %s for state 0x%08X on fp[%02d]. "
"Got 0x%x instead\n", __FUNCTION__, poll ? "polling" : "waiting",
state, idx, *state_p);
rc = EBUSY;
bxe_wait_ramrod_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_RAMROD);
return (rc);
}
/*
*
*
*/
static void
bxe_write_dmae_phys_len(struct bxe_softc *sc, bus_addr_t phys_addr,
uint32_t addr, uint32_t len)
{
int dmae_wr_max, offset;
DBENTER(BXE_INSANE_REGS);
dmae_wr_max = DMAE_LEN32_WR_MAX(sc);
offset = 0;
while (len > dmae_wr_max) {
bxe_write_dmae(sc, phys_addr + offset, addr + offset,
dmae_wr_max);
offset += dmae_wr_max * 4;
len -= dmae_wr_max;
}
bxe_write_dmae(sc, phys_addr + offset, addr + offset, len);
DBEXIT(BXE_INSANE_REGS);
}
#define INIT_MEM_WR(block, reg, part, hw, data, reg_off, len) \
bxe_init_str_wr(sc, GRCBASE_##block + reg + reg_off * 4, data, len)
/*
* Write a block of data to a range of registers.
*
* Returns:
* None.
*/
static void
bxe_init_str_wr(struct bxe_softc *sc, uint32_t addr, const uint32_t *data,
uint32_t len)
{
uint32_t i;
for (i = 0; i < len; i++)
REG_WR(sc, addr + i * 4, data[i]);
}
/*
* Write a block of data to a range of registers using indirect access.
*
* Returns:
* None.
*/
static void
bxe_init_ind_wr(struct bxe_softc *sc, uint32_t addr, const uint32_t *data,
uint16_t len)
{
uint32_t i;
for (i = 0; i < len; i++)
REG_WR_IND(sc, addr + i * 4, data[i]);
}
/*
*
* Returns:
* None.
*/
static void
bxe_write_big_buf(struct bxe_softc *sc, uint32_t addr, uint32_t len)
{
DBENTER(BXE_INSANE_REGS);
#ifdef BXE_USE_DMAE
if (sc->dmae_ready)
bxe_write_dmae_phys_len(sc, sc->gz_dma.paddr, addr, len);
else
bxe_init_str_wr(sc, addr, sc->gz, len);
#else
bxe_init_str_wr(sc, addr, sc->gz, len);
#endif
DBEXIT(BXE_INSANE_REGS);
}
/*
* Fill areas of device memory with the specified value.
*
* Generally used to clear a small area of device memory prior to writing
* firmware to STORM memory or writing STORM firmware to device memory.
*
* Returns:
* None.
*/
static void
bxe_init_fill(struct bxe_softc *sc, uint32_t addr, int fill, uint32_t len)
{
uint32_t cur_len, i, leftovers, length;
DBENTER(BXE_VERBOSE_LOAD);
length = (((len * 4) > BXE_FW_BUF_SIZE) ? BXE_FW_BUF_SIZE : (len * 4));
leftovers = length / 4;
memset(sc->gz, fill, length);
for (i = 0; i < len; i += leftovers) {
cur_len = min(leftovers, len - i);
bxe_write_big_buf(sc, addr + i * 4, cur_len);
}
DBEXIT(BXE_VERBOSE_LOAD);
}
/*
*
* Returns:
* None.
*/
static void
bxe_init_wr_64(struct bxe_softc *sc, uint32_t addr, const uint32_t *data,
uint32_t len64)
{
uint64_t data64, *pdata;
uint32_t buf_len32, cur_len, len;
int i;
DBENTER(BXE_INSANE_REGS);
buf_len32 = BXE_FW_BUF_SIZE / 4;
len = len64 * 2;
/* 64 bit value is in a blob: first low DWORD, then high DWORD. */
data64 = HILO_U64((*(data + 1)), (*data));
len64 = min((uint32_t)(BXE_FW_BUF_SIZE / 8), len64);
for (i = 0; i < len64; i++) {
pdata = ((uint64_t *)(sc->gz)) + i;
*pdata = data64;
}
for (i = 0; i < len; i += buf_len32) {
cur_len = min(buf_len32, len - i);
bxe_write_big_buf(sc, addr + i*4, cur_len);
}
DBEXIT(BXE_INSANE_REGS);
}
/*
* There are different blobs for each PRAM section. In addition, each
* blob write operation is divided into multiple, smaller write
* operations in order to decrease the amount of physically contiguous
* buffer memory needed. Thus, when we select a blob, the address may
* be with some offset from the beginning of PRAM section. The same
* holds for the INT_TABLE sections.
*/
#define IF_IS_INT_TABLE_ADDR(base, addr) \
if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
#define IF_IS_PRAM_ADDR(base, addr) \
if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
/*
*
* Returns:
* None.
*/
static const uint8_t *
bxe_sel_blob(struct bxe_softc *sc, uint32_t addr, const uint8_t *data)
{
IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
data = INIT_TSEM_INT_TABLE_DATA(sc);
else
IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
data = INIT_CSEM_INT_TABLE_DATA(sc);
else
IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
data = INIT_USEM_INT_TABLE_DATA(sc);
else
IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
data = INIT_XSEM_INT_TABLE_DATA(sc);
else
IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
data = INIT_TSEM_PRAM_DATA(sc);
else
IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
data = INIT_CSEM_PRAM_DATA(sc);
else
IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
data = INIT_USEM_PRAM_DATA(sc);
else
IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
data = INIT_XSEM_PRAM_DATA(sc);
return (data);
}
static void
bxe_write_big_buf_wb(struct bxe_softc *sc, uint32_t addr, uint32_t len)
{
if (sc->dmae_ready)
bxe_write_dmae_phys_len(sc, sc->gz_dma.paddr, addr, len);
else
bxe_init_ind_wr(sc, addr, sc->gz, len);
}
#define VIRT_WR_DMAE_LEN(sc, data, addr, len32, le32_swap) \
do { \
memcpy(sc->gz, data, (len32)*4); \
bxe_write_big_buf_wb(sc, addr, len32); \
} while (0)
/*
*
* Returns:
* None.
*/
static void
bxe_init_wr_wb(struct bxe_softc *sc, uint32_t addr, const uint32_t *data,
uint32_t len)
{
const uint32_t *old_data;
DBENTER(BXE_INSANE_REGS);
old_data = data;
data = (const uint32_t *)bxe_sel_blob(sc, addr, (const uint8_t *)data);
if (sc->dmae_ready) {
if (old_data != data)
VIRT_WR_DMAE_LEN(sc, data, addr, len, 1);
else
VIRT_WR_DMAE_LEN(sc, data, addr, len, 0);
} else
bxe_init_ind_wr(sc, addr, data, len);
DBEXIT(BXE_INSANE_REGS);
}
static void
bxe_init_wr_zp(struct bxe_softc *sc, uint32_t addr, uint32_t len,
uint32_t blob_off)
{
BXE_PRINTF("%s(%d): Compressed FW is not supported yet. "
"ERROR: address:0x%x len:0x%x blob_offset:0x%x\n",
__FILE__, __LINE__, addr, len, blob_off);
}
/*
* Initialize blocks of the device.
*
* This routine basically performs bulk register programming for different
* blocks within the controller. The file bxe_init_values.h contains a
* series of register access operations (read, write, fill, etc.) as well
* as a BLOB of data to initialize multiple blocks within the controller.
* Block initialization may be supported by all controllers or by specific
* models only.
*
* Returns:
* None.
*/
static void
bxe_init_block(struct bxe_softc *sc, uint32_t block, uint32_t stage)
{
union init_op *op;
const uint32_t *data, *data_base;
uint32_t i, op_type, addr, len;
uint16_t op_end, op_start;
int hw_wr;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
op_start = INIT_OPS_OFFSETS(sc)[BLOCK_OPS_IDX(block, stage,
STAGE_START)];
op_end = INIT_OPS_OFFSETS(sc)[BLOCK_OPS_IDX(block, stage, STAGE_END)];
/* If empty block */
if (op_start == op_end)
return;
hw_wr = OP_WR_ASIC;
data_base = INIT_DATA(sc);
for (i = op_start; i < op_end; i++) {
op = (union init_op *)&(INIT_OPS(sc)[i]);
op_type = op->str_wr.op;
addr = op->str_wr.offset;
len = op->str_wr.data_len;
data = data_base + op->str_wr.data_off;
/* HW/EMUL specific */
if ((op_type > OP_WB) && (op_type == hw_wr))
op_type = OP_WR;
switch (op_type) {
case OP_RD:
REG_RD(sc, addr);
break;
case OP_WR:
REG_WR(sc, addr, op->write.val);
break;
case OP_SW:
bxe_init_str_wr(sc, addr, data, len);
break;
case OP_WB:
bxe_init_wr_wb(sc, addr, data, len);
break;
case OP_SI:
bxe_init_ind_wr(sc, addr, data, len);
break;
case OP_ZR:
bxe_init_fill(sc, addr, 0, op->zero.len);
break;
case OP_ZP:
bxe_init_wr_zp(sc, addr, len, op->str_wr.data_off);
break;
case OP_WR_64:
bxe_init_wr_64(sc, addr, data, len);
break;
default:
/* happens whenever an op is of a diff HW */
break;
}
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Handles controller initialization when called from an unlocked routine.
* ifconfig calls this function.
*
* Returns:
* None.
*/
static void
bxe_init(void *xsc)
{
struct bxe_softc *sc;
sc = xsc;
BXE_CORE_LOCK(sc);
bxe_init_locked(sc, LOAD_NORMAL);
BXE_CORE_UNLOCK(sc);
}
/*
* Release all resources used by the driver.
*
* Releases all resources acquired by the driver including interrupts,
* interrupt handler, interfaces, mutexes, and DMA memory.
*
* Returns:
* None.
*/
static void
bxe_release_resources(struct bxe_softc *sc)
{
device_t dev;
DBENTER(BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
dev = sc->dev;
/* Release the FreeBSD interface. */
if (sc->bxe_ifp != NULL)
if_free(sc->bxe_ifp);
/* Free the DMA resources. */
bxe_host_structures_free(sc);
#if __FreeBSD_version >= 800000
/* Free multiqueue buffer rings. */
bxe_free_buf_rings(sc);
#endif
}
/*
* Indirect register write.
*
* Writes NetXtreme II registers using an index/data register pair in PCI
* configuration space. Using this mechanism avoids issues with posted
* writes but is much slower than memory-mapped I/O.
*
* Returns:
* None.
*/
static void
bxe_reg_wr_ind(struct bxe_softc *sc, uint32_t offset, uint32_t val)
{
DBPRINT(sc, BXE_INSANE_REGS, "%s(); offset = 0x%08X, val = 0x%08X\n",
__FUNCTION__, offset, val);
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS, offset, 4);
pci_write_config(sc->dev, PCICFG_GRC_DATA, val, 4);
/* Return to a safe address. */
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS,
PCICFG_VENDOR_ID_OFFSET, 4);
}
/*
* Indirect register read.
*
* Reads NetXtreme II registers using an index/data register pair in PCI
* configuration space. Using this mechanism avoids issues with posted
* reads but is much slower than memory-mapped I/O.
*
* Returns:
* The value of the register.
*/
static uint32_t
bxe_reg_rd_ind(struct bxe_softc *sc, uint32_t offset)
{
uint32_t val;
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS, offset, 4);
val = pci_read_config(sc->dev, PCICFG_GRC_DATA, 4);
/* Return to a safe address. */
pci_write_config(sc->dev, PCICFG_GRC_ADDRESS,
PCICFG_VENDOR_ID_OFFSET, 4);
DBPRINT(sc, BXE_INSANE_REGS, "%s(); offset = 0x%08X, val = 0x%08X\n",
__FUNCTION__, offset, val);
return (val);
}
static uint32_t dmae_reg_go_c[] = {
DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
};
/*
* Copy DMAE command into memory and start the command.
*
* Returns:
* None.
*/
static void
bxe_post_dmae(struct bxe_softc *sc, struct dmae_command *dmae, int idx)
{
uint32_t cmd_offset;
int i;
cmd_offset = (DMAE_REG_CMD_MEM + sizeof(struct dmae_command) * idx);
for (i = 0; i < (sizeof(struct dmae_command) / 4); i++) {
REG_WR(sc, cmd_offset + i * 4, *(((uint32_t *)dmae) + i));
DBPRINT(sc, BXE_INSANE_REGS, "%s(): DMAE cmd[%d].%d : 0x%08X\n",
__FUNCTION__, idx, i, cmd_offset + i * 4);
}
/* Kick off the command. */
REG_WR(sc, dmae_reg_go_c[idx], 1);
}
/*
* Perform a DMAE write to device memory.
*
* Some of the registers on the 577XX controller are 128bits wide. It is
* required that when accessing those registers that they be written
* atomically and that no intervening bus acceses to the device occur.
* This could be handled by a lock held across all driver instances for
* the device or it can be handled by performing a DMA operation when
* writing to the device. This code implements the latter.
*
* Returns:
* None.
*/
void
bxe_write_dmae(struct bxe_softc *sc, bus_addr_t dma_addr, uint32_t dst_addr,
uint32_t len32)
{
struct dmae_command dmae;
uint32_t *data, *wb_comp;
int timeout;
DBENTER(BXE_INSANE_REGS);
DBPRINT(sc, BXE_EXTREME_REGS,
"%s(): host addr = 0x%jX, device addr = 0x%08X, length = %d.\n",
__FUNCTION__, (uintmax_t)dma_addr, dst_addr, (int)len32);
wb_comp = BXE_SP(sc, wb_comp);
/* Fall back to indirect access if DMAE is not ready. */
if (!sc->dmae_ready) {
data = BXE_SP(sc, wb_data[0]);
DBPRINT(sc, BXE_WARN, "%s(): DMAE not ready, "
"using indirect.\n", __FUNCTION__);
bxe_init_ind_wr(sc, dst_addr, data, len32);
goto bxe_write_dmae_exit;
}
memset(&dmae, 0, sizeof(struct dmae_command));
dmae.opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(BP_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(BP_E1HVN(sc) << DMAE_CMD_E1HVN_SHIFT));
dmae.src_addr_lo = U64_LO(dma_addr);
dmae.src_addr_hi = U64_HI(dma_addr);
dmae.dst_addr_lo = dst_addr >> 2;
dmae.dst_addr_hi = 0;
dmae.len = len32;
dmae.comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, wb_comp));
dmae.comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, wb_comp));
dmae.comp_val = BXE_WB_COMP_VAL;
BXE_DMAE_LOCK(sc);
*wb_comp = 0;
bxe_post_dmae(sc, &dmae, INIT_DMAE_C(sc));
DELAY(50);
/* Wait up to 200ms. */
timeout = 4000;
while (*wb_comp != BXE_WB_COMP_VAL) {
if (!timeout) {
DBPRINT(sc, BXE_FATAL,
"%s(): DMAE timeout (dst_addr = 0x%08X, len = %d)!\n",
__FUNCTION__, dst_addr, len32);
break;
}
timeout--;
DELAY(50);
}
BXE_DMAE_UNLOCK(sc);
bxe_write_dmae_exit:
DBEXIT(BXE_INSANE_REGS);
}
/*
* Perform a DMAE read from to device memory.
*
* Some of the registers on the 577XX controller are 128bits wide. It is
* required that when accessing those registers that they be read
* atomically and that no intervening bus acceses to the device occur.
* This could be handled by a lock held across all driver instances for
* the device or it can be handled by performing a DMA operation when
* reading from the device. This code implements the latter.
*
* Returns:
* None.
*/
void
bxe_read_dmae(struct bxe_softc *sc, uint32_t src_addr,
uint32_t len32)
{
struct dmae_command dmae;
uint32_t *data, *wb_comp;
int i, timeout;
DBENTER(BXE_INSANE_REGS);
wb_comp = BXE_SP(sc, wb_comp);
/* Fall back to indirect access if DMAE is not ready. */
if (!sc->dmae_ready) {
data = BXE_SP(sc, wb_data[0]);
DBPRINT(sc, BXE_WARN, "%s(): DMAE not ready, "
"using indirect.\n", __FUNCTION__);
for (i = 0; i < len32; i++)
data[i] = bxe_reg_rd_ind(sc, src_addr + i * 4);
goto bxe_read_dmae_exit;
}
memset(&dmae, 0, sizeof(struct dmae_command));
dmae.opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(BP_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(BP_E1HVN(sc) << DMAE_CMD_E1HVN_SHIFT));
dmae.src_addr_lo = src_addr >> 2;
dmae.src_addr_hi = 0;
dmae.dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, wb_data));
dmae.dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, wb_data));
dmae.len = len32;
dmae.comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, wb_comp));
dmae.comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, wb_comp));
dmae.comp_val = BXE_WB_COMP_VAL;
BXE_DMAE_LOCK(sc);
memset(BXE_SP(sc, wb_data[0]), 0, sizeof(uint32_t) * 4);
*wb_comp = 0;
bxe_post_dmae(sc, &dmae, INIT_DMAE_C(sc));
DELAY(50);
timeout = 4000;
while (*wb_comp != BXE_WB_COMP_VAL) {
if (!timeout) {
DBPRINT(sc, BXE_FATAL,
"%s(): DMAE timeout (src_addr = 0x%08X, len = %d)!\n",
__FUNCTION__, src_addr, len32);
break;
}
timeout--;
DELAY(50);
}
BXE_DMAE_UNLOCK(sc);
bxe_read_dmae_exit:
DBEXIT(BXE_INSANE_REGS);
}
/*
* DMAE write wrapper.
*
* Returns:
* None.
*/
static void
bxe_wb_wr(struct bxe_softc *sc, int reg, uint32_t val_hi, uint32_t val_lo)
{
uint32_t wb_write[2];
wb_write[0] = val_hi;
wb_write[1] = val_lo;
REG_WR_DMAE(sc, reg, wb_write, 2);
}
/*
* Poll a register waiting for a value.
*
* Returns:
* The last read register value.
*/
static __inline
uint32_t bxe_reg_poll(struct bxe_softc *sc, uint32_t reg, uint32_t expected,
int ms, int wait)
{
uint32_t val;
do {
val = REG_RD(sc, reg);
if (val == expected)
break;
ms -= wait;
DELAY(wait * 1000);
} while (ms > 0);
return (val);
}
/*
* Microcode assert display.
*
* This function walks through each STORM processor and prints out a
* listing of all asserts currently in effect. Useful for post-mortem
* debugging.
*
* Returns:
* The number of asserts detected.
*/
static int
bxe_mc_assert(struct bxe_softc *sc)
{
uint32_t row0, row1, row2, row3;
char last_idx;
int i, rc;
DBENTER(BXE_VERBOSE_INTR);
rc = 0;
/* XSTORM */
last_idx = REG_RD8(sc, BAR_XSTORM_INTMEM +
XSTORM_ASSERT_LIST_INDEX_OFFSET);
if (last_idx)
DBPRINT(sc, BXE_FATAL, "DATA XSTORM_ASSERT_LIST_INDEX 0x%x\n",
last_idx);
/* Print the asserts */
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
row0 = REG_RD(sc, BAR_XSTORM_INTMEM +
XSTORM_ASSERT_LIST_OFFSET(i));
row1 = REG_RD(sc, BAR_XSTORM_INTMEM +
XSTORM_ASSERT_LIST_OFFSET(i) + 4);
row2 = REG_RD(sc, BAR_XSTORM_INTMEM +
XSTORM_ASSERT_LIST_OFFSET(i) + 8);
row3 = REG_RD(sc, BAR_XSTORM_INTMEM +
XSTORM_ASSERT_LIST_OFFSET(i) + 12);
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
DBPRINT(sc, BXE_FATAL, "DATA XSTORM_ASSERT_INDEX %d = "
"0x%08x 0x%08x 0x%08x 0x%08x\n", i, row3, row2,
row1, row0);
rc++;
} else
break;
}
/* TSTORM */
last_idx = REG_RD8(sc, BAR_TSTORM_INTMEM +
TSTORM_ASSERT_LIST_INDEX_OFFSET);
if (last_idx)
DBPRINT(sc, BXE_FATAL, "DATA TSTORM_ASSERT_LIST_INDEX 0x%x\n",
last_idx);
/* Print the asserts */
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
row0 = REG_RD(sc, BAR_TSTORM_INTMEM +
TSTORM_ASSERT_LIST_OFFSET(i));
row1 = REG_RD(sc, BAR_TSTORM_INTMEM +
TSTORM_ASSERT_LIST_OFFSET(i) + 4);
row2 = REG_RD(sc, BAR_TSTORM_INTMEM +
TSTORM_ASSERT_LIST_OFFSET(i) + 8);
row3 = REG_RD(sc, BAR_TSTORM_INTMEM +
TSTORM_ASSERT_LIST_OFFSET(i) + 12);
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
DBPRINT(sc, BXE_FATAL, "DATA TSTORM_ASSERT_INDEX %d = "
"0x%08x 0x%08x 0x%08x 0x%08x\n", i, row3, row2,
row1, row0);
rc++;
} else
break;
}
/* CSTORM */
last_idx = REG_RD8(sc, BAR_CSTORM_INTMEM +
CSTORM_ASSERT_LIST_INDEX_OFFSET);
if (last_idx)
DBPRINT(sc, BXE_FATAL, "DATA CSTORM_ASSERT_LIST_INDEX 0x%x\n",
last_idx);
/* Print the asserts */
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
row0 = REG_RD(sc, BAR_CSTORM_INTMEM +
CSTORM_ASSERT_LIST_OFFSET(i));
row1 = REG_RD(sc, BAR_CSTORM_INTMEM +
CSTORM_ASSERT_LIST_OFFSET(i) + 4);
row2 = REG_RD(sc, BAR_CSTORM_INTMEM +
CSTORM_ASSERT_LIST_OFFSET(i) + 8);
row3 = REG_RD(sc, BAR_CSTORM_INTMEM +
CSTORM_ASSERT_LIST_OFFSET(i) + 12);
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
DBPRINT(sc, BXE_FATAL, "DATA CSTORM_ASSERT_INDEX %d = "
"0x%08x 0x%08x 0x%08x 0x%08x\n", i, row3, row2,
row1, row0);
rc++;
} else
break;
}
/* USTORM */
last_idx = REG_RD8(sc, BAR_USTORM_INTMEM +
USTORM_ASSERT_LIST_INDEX_OFFSET);
if (last_idx)
DBPRINT(sc, BXE_FATAL, "DATA USTORM_ASSERT_LIST_INDEX 0x%x\n",
last_idx);
/* Print the asserts */
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
row0 = REG_RD(sc, BAR_USTORM_INTMEM +
USTORM_ASSERT_LIST_OFFSET(i));
row1 = REG_RD(sc, BAR_USTORM_INTMEM +
USTORM_ASSERT_LIST_OFFSET(i) + 4);
row2 = REG_RD(sc, BAR_USTORM_INTMEM +
USTORM_ASSERT_LIST_OFFSET(i) + 8);
row3 = REG_RD(sc, BAR_USTORM_INTMEM +
USTORM_ASSERT_LIST_OFFSET(i) + 12);
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
DBPRINT(sc, BXE_FATAL, "DATA USTORM_ASSERT_INDEX %d = "
"0x%08x 0x%08x 0x%08x 0x%08x\n", i, row3, row2,
row1, row0);
rc++;
} else
break;
}
DBEXIT(BXE_VERBOSE_INTR);
return (rc);
}
/*
* Perform a panic dump.
*
* Returns:
* None
*/
static void
bxe_panic_dump(struct bxe_softc *sc)
{
DBENTER(BXE_FATAL);
sc->stats_state = STATS_STATE_DISABLED;
BXE_PRINTF("---------- Begin crash dump ----------\n");
/* Idle check is run twice to verify the controller has stopped. */
bxe_idle_chk(sc);
bxe_idle_chk(sc);
bxe_mc_assert(sc);
#ifdef BXE_DEBUG
bxe_breakpoint(sc);
#endif
BXE_PRINTF("---------- End crash dump ----------\n");
DBEXIT(BXE_FATAL);
}
/*
* Enables interrupt generation.
*
* Returns:
* None.
*/
static void
bxe_int_enable(struct bxe_softc *sc)
{
uint32_t hc_addr, val;
int port;
DBENTER(BXE_VERBOSE_INTR);
port = BP_PORT(sc);
hc_addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
val = REG_RD(sc, hc_addr);
if (sc->msix_count > 0) {
if (sc->msix_count == 1) {
/* Single interrupt, multiple queues.*/
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): Setting host coalescing registers for MSI-X (SIMQ).\n",
__FUNCTION__);
/* Clear INTx. */
val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
/* Enable single ISR mode, MSI/MSI-X, and attention messages. */
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
} else {
/* Multiple interrupts, multiple queues.*/
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): Setting host coalescing registers for MSI-X (MIMQ).\n",
__FUNCTION__);
/* Clear single ISR mode and INTx. */
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0);
/* Enable MSI/MSI-X and attention messages. */
val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
}
} else if (sc->msi_count > 0) {
if (sc->msi_count == 1) {
/* Single interrupt, multiple queues.*/
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): Setting host coalescing registers for MSI (SIMQ).\n",
__FUNCTION__);
/* Clear INTx. */
val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
/* Enable single ISR mode, MSI/MSI-X, and attention
* messages.
*/
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
} else {
/* Multiple interrupts, multiple queues.*/
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): Setting host coalescing registers for"
"MSI (MIMQ).\n",
__FUNCTION__);
/* Clear single ISR mode and INTx. */
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0);
/* Enable MSI/MSI-X and attention messages. */
val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
}
} else {
/* Single interrupt, single queue. */
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): Setting host coalescing registers for INTA#.\n",
__FUNCTION__);
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
REG_WR(sc, hc_addr, val);
val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
}
/* Write the interrupt mode to the host coalescing block. */
REG_WR(sc, hc_addr, val);
if (CHIP_IS_E1H(sc)) {
/* Init leading/trailing edge attention generation. */
if (IS_E1HMF(sc)) {
val = (0xee0f | (1 << (BP_E1HVN(sc) + 4)));
/*
* Check if this driver instance is the port
* master function.
*/
if (sc->port.pmf)
/* Enable nig & GPIO3 attentions. */
val |= 0x1100;
} else
val = 0xffff;
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, val);
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, val);
}
DBEXIT(BXE_VERBOSE_INTR);
}
/*
* Disables interrupt generation.
*
* Returns:
* None.
*/
static void
bxe_int_disable(struct bxe_softc *sc)
{
uint32_t hc_addr, val;
int port;
DBENTER(BXE_VERBOSE_INTR | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
port = BP_PORT(sc);
hc_addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
val = REG_RD(sc, hc_addr);
val &= ~(HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0);
REG_WR(sc, hc_addr, val);
if (REG_RD(sc, hc_addr)!= val) {
DBPRINT(sc, BXE_WARN, "%s(): BUG! Returned value from IGU "
"doesn't match value written (0x%08X).\n",
__FUNCTION__, val);
}
DBEXIT(BXE_VERBOSE_INTR | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
#define BXE_CRC32_RESIDUAL 0xdebb20e3
/*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_nvram_acquire_lock(struct bxe_softc *sc)
{
uint32_t val;
int i, port, rc;
DBENTER(BXE_VERBOSE_NVRAM);
port = BP_PORT(sc);
rc = 0;
val = 0;
/* Acquire the NVRAM lock. */
REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
(MCPR_NVM_SW_ARB_ARB_REQ_SET1 << port));
for (i = 0; i < NVRAM_TIMEOUT_COUNT * 10; i++) {
val = REG_RD(sc, MCP_REG_MCPR_NVM_SW_ARB);
if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))
break;
DELAY(5);
}
if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))) {
DBPRINT(sc, BXE_WARN, "%s(): Cannot acquire NVRAM lock!\n",
__FUNCTION__);
rc = EBUSY;
}
DBEXIT(BXE_VERBOSE_NVRAM);
return (rc);
}
/*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_nvram_release_lock(struct bxe_softc *sc)
{
uint32_t val;
int i, port, rc;
DBENTER(BXE_VERBOSE_NVRAM);
port = BP_PORT(sc);
rc = 0;
val = 0;
/* Release the NVRAM lock. */
REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
(MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << port));
for (i = 0; i < NVRAM_TIMEOUT_COUNT * 10; i++) {
val = REG_RD(sc, MCP_REG_MCPR_NVM_SW_ARB);
if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)))
break;
DELAY(5);
}
if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)) {
DBPRINT(sc, BXE_WARN, "%s(): Cannot release NVRAM lock!\n",
__FUNCTION__);
rc = EBUSY;
}
DBEXIT(BXE_VERBOSE_NVRAM);
return (rc);
}
/*
* Returns:
* None.
*/
static void
bxe_nvram_enable_access(struct bxe_softc *sc)
{
uint32_t val;
DBENTER(BXE_VERBOSE_NVRAM);
val = REG_RD(sc, MCP_REG_MCPR_NVM_ACCESS_ENABLE);
/* Enable both bits, even on read */
REG_WR(sc, MCP_REG_MCPR_NVM_ACCESS_ENABLE,
(val | MCPR_NVM_ACCESS_ENABLE_EN |
MCPR_NVM_ACCESS_ENABLE_WR_EN));
DBEXIT(BXE_VERBOSE_NVRAM);
}
/*
* Returns:
* None.
*/
static void
bxe_nvram_disable_access(struct bxe_softc *sc)
{
uint32_t val;
DBENTER(BXE_VERBOSE_NVRAM);
val = REG_RD(sc, MCP_REG_MCPR_NVM_ACCESS_ENABLE);
/* Disable both bits, even after read. */
REG_WR(sc, MCP_REG_MCPR_NVM_ACCESS_ENABLE,
(val & ~(MCPR_NVM_ACCESS_ENABLE_EN |
MCPR_NVM_ACCESS_ENABLE_WR_EN)));
DBEXIT(BXE_VERBOSE_NVRAM);
}
/*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_nvram_read_dword(struct bxe_softc *sc, uint32_t offset, uint32_t *ret_val,
uint32_t cmd_flags)
{
uint32_t val;
int i, rc;
DBENTER(BXE_INSANE_NVRAM);
/* Build the command word. */
cmd_flags |= MCPR_NVM_COMMAND_DOIT;
/* Need to clear DONE bit separately. */
REG_WR(sc, MCP_REG_MCPR_NVM_COMMAND, MCPR_NVM_COMMAND_DONE);
/* Address within the NVRAM to read. */
REG_WR(sc, MCP_REG_MCPR_NVM_ADDR,
(offset & MCPR_NVM_ADDR_NVM_ADDR_VALUE));
/* Issue a read command. */
REG_WR(sc, MCP_REG_MCPR_NVM_COMMAND, cmd_flags);
/* Wait for completion. */
*ret_val = 0;
rc = EBUSY;
for (i = 0; i < NVRAM_TIMEOUT_COUNT; i++) {
DELAY(5);
val = REG_RD(sc, MCP_REG_MCPR_NVM_COMMAND);
if (val & MCPR_NVM_COMMAND_DONE) {
val = REG_RD(sc, MCP_REG_MCPR_NVM_READ);
val = htobe32(val);
*ret_val = val;
rc = 0;
break;
}
}
DBPRINT(sc, BXE_INSANE_NVRAM, "%s(): Read 0x%08X from offset 0x%08X.\n",
__FUNCTION__, *ret_val, offset);
DBEXIT(BXE_INSANE_NVRAM);
return (rc);
}
/*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_nvram_read(struct bxe_softc *sc, uint32_t offset, uint8_t *ret_buf,
int buf_size)
{
uint32_t cmd_flags, val;
int rc;
DBENTER(BXE_EXTREME_NVRAM);
if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
DBPRINT(sc, BXE_WARN, "%s(): Unaligned address or invalid "
"buffer for NVRAM read (offset = 0x%08X, buf_size = %d)!\n",
__FUNCTION__, offset, buf_size);
rc = EINVAL;
goto bxe_nvram_read_exit;
}
if (offset + buf_size > sc->common.flash_size) {
DBPRINT(sc, BXE_WARN, "%s(): Read extends beyond the end of "
"the NVRAM (offset (0x%08X) + buf_size (%d) > flash_size "
"(0x%08X))!\n", __FUNCTION__, offset, buf_size,
sc->common.flash_size);
rc = EINVAL;
goto bxe_nvram_read_exit;
}
rc = bxe_nvram_acquire_lock(sc);
if (rc)
goto bxe_nvram_read_exit;
bxe_nvram_enable_access(sc);
/* Read the first word(s). */
cmd_flags = MCPR_NVM_COMMAND_FIRST;
while ((buf_size > sizeof(uint32_t)) && (rc == 0)) {
rc = bxe_nvram_read_dword(sc, offset, &val, cmd_flags);
memcpy(ret_buf, &val, 4);
/* Advance to the next DWORD. */
offset += sizeof(uint32_t);
ret_buf += sizeof(uint32_t);
buf_size -= sizeof(uint32_t);
cmd_flags = 0;
}
/* Read the final word. */
if (rc == 0) {
cmd_flags |= MCPR_NVM_COMMAND_LAST;
rc = bxe_nvram_read_dword(sc, offset, &val, cmd_flags);
memcpy(ret_buf, &val, 4);
}
/* Disable access to NVRAM interface. */
bxe_nvram_disable_access(sc);
bxe_nvram_release_lock(sc);
bxe_nvram_read_exit:
DBEXIT(BXE_EXTREME_NVRAM);
return (rc);
}
#ifdef BXE_NVRAM_WRITE_SUPPORT
/*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_nvram_write_dword(struct bxe_softc *sc, uint32_t offset, uint32_t val,
uint32_t cmd_flags)
{
int i, rc;
DBENTER(BXE_VERBOSE_NVRAM);
/* Build the command word. */
cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR;
/* Need to clear DONE bit separately. */
REG_WR(sc, MCP_REG_MCPR_NVM_COMMAND, MCPR_NVM_COMMAND_DONE);
/* Write the data. */
REG_WR(sc, MCP_REG_MCPR_NVM_WRITE, val);
/* Address to write within the NVRAM. */
REG_WR(sc, MCP_REG_MCPR_NVM_ADDR,
(offset & MCPR_NVM_ADDR_NVM_ADDR_VALUE));
/* Issue the write command. */
REG_WR(sc, MCP_REG_MCPR_NVM_COMMAND, cmd_flags);
/* Wait for completion. */
rc = EBUSY;
for (i = 0; i < NVRAM_TIMEOUT_COUNT; i++) {
DELAY(5);
val = REG_RD(sc, MCP_REG_MCPR_NVM_COMMAND);
if (val & MCPR_NVM_COMMAND_DONE) {
rc = 0;
break;
}
}
DBEXIT(BXE_VERBOSE_NVRAM);
return (rc);
}
#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
/*
* Returns:
*
*/
static int
bxe_nvram_write1(struct bxe_softc *sc, uint32_t offset, uint8_t *data_buf,
int buf_size)
{
uint32_t align_offset, cmd_flags, val;
int rc;
DBENTER(BXE_VERBOSE_NVRAM);
if (offset + buf_size > sc->common.flash_size) {
DBPRINT(sc, BXE_WARN, "%s(): Write extends beyond the end of "
"the NVRAM (offset (0x%08X) + buf_size (%d) > flash_size "
"(0x%08X))!\n", __FUNCTION__, offset, buf_size,
sc->common.flash_size);
rc = EINVAL;
goto bxe_nvram_write1_exit;
}
/* request access to nvram interface */
rc = bxe_nvram_acquire_lock(sc);
if (rc)
goto bxe_nvram_write1_exit;
/* Enable access to the NVRAM interface. */
bxe_nvram_enable_access(sc);
cmd_flags = (MCPR_NVM_COMMAND_FIRST | MCPR_NVM_COMMAND_LAST);
align_offset = (offset & ~0x03);
rc = bxe_nvram_read_dword(sc, align_offset, &val, cmd_flags);
if (rc == 0) {
val &= ~(0xff << BYTE_OFFSET(offset));
val |= (*data_buf << BYTE_OFFSET(offset));
val = be32toh(val);
rc = bxe_nvram_write_dword(sc, align_offset, val, cmd_flags);
}
/* Disable access to the NVRAM interface. */
bxe_nvram_disable_access(sc);
bxe_nvram_release_lock(sc);
bxe_nvram_write1_exit:
DBEXIT(BXE_VERBOSE_NVRAM);
return (rc);
}
/*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_nvram_write(struct bxe_softc *sc, uint32_t offset, uint8_t *data_buf,
int buf_size)
{
uint32_t cmd_flags, val, written_so_far;
int rc;
rc = 0;
if (buf_size == 1)
return (bxe_nvram_write1(sc, offset, data_buf, buf_size));
if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
DBPRINT(sc, BXE_WARN, "%s(): Unaligned address or invalid "
"buffer for NVRAM write "
"(offset = 0x%08X, buf_size = %d)!\n", __FUNCTION__,
offset, buf_size);
rc = EINVAL;
goto bxe_nvram_write_exit;
}
if (offset + buf_size > sc->common.flash_size) {
DBPRINT(sc, BXE_WARN, "%s(): Write extends beyond the end of "
"the NVRAM (offset (0x%08X) + buf_size (%d) > flash_size "
"(0x%08X))!\n", __FUNCTION__, offset, buf_size,
sc->common.flash_size);
rc = EINVAL;
goto bxe_nvram_write_exit;
}
/* Request access to NVRAM interface. */
rc = bxe_nvram_acquire_lock(sc);
if (rc)
goto bxe_nvram_write_exit;
/* Enable access to the NVRAM interface. */
bxe_nvram_enable_access(sc);
written_so_far = 0;
cmd_flags = MCPR_NVM_COMMAND_FIRST;
while ((written_so_far < buf_size) && (rc == 0)) {
if (written_so_far == (buf_size - sizeof(uint32_t)))
cmd_flags |= MCPR_NVM_COMMAND_LAST;
else if (((offset + 4) % NVRAM_PAGE_SIZE) == 0)
cmd_flags |= MCPR_NVM_COMMAND_LAST;
else if ((offset % NVRAM_PAGE_SIZE) == 0)
cmd_flags |= MCPR_NVM_COMMAND_FIRST;
memcpy(&val, data_buf, 4);
rc = bxe_nvram_write_dword(sc, offset, val, cmd_flags);
/* Advance to the next DWORD. */
offset += sizeof(uint32_t);
data_buf += sizeof(uint32_t);
written_so_far += sizeof(uint32_t);
cmd_flags = 0;
}
/* Disable access to the NVRAM interface. */
bxe_nvram_disable_access(sc);
bxe_nvram_release_lock(sc);
bxe_nvram_write_exit:
DBEXIT(BXE_VERBOSE_NVRAM);
return (rc);
}
#endif
/*
* This function validates NVRAM content by reading spcific
* regions and validating that the NVRAM checksum matches the
* actual content.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_nvram_test(struct bxe_softc *sc)
{
static const struct {
int offset;
int size;
} nvram_tbl[] = {
{ 0, 0x14 }, /* bootstrap area*/
{ 0x14, 0xec }, /* directory area */
{ 0x100, 0x350 }, /* manuf_info */
{ 0x450, 0xf0 }, /* feature_info */
{ 0x640, 0x64 }, /* upgrade_key_info */
{ 0x708, 0x70 }, /* manuf_key_info */
{ 0, 0 }
};
uint32_t magic, csum, buf[0x350 / 4];
uint8_t *data;
int i, rc;
DBENTER(BXE_VERBOSE_NVRAM);
data = (uint8_t *) buf;
/* Read the DWORD at offset 0 in NVRAM. */
rc = bxe_nvram_read(sc, 0, data, 4);
if (rc) {
BXE_PRINTF("%s(%d): Error (%d) returned reading NVRAM!\n",
__FILE__, __LINE__, rc);
goto bxe_nvram_test_exit;
}
/* Make sure we found our magic value. */
magic = be32toh(buf[0]);
if (magic != 0x669955aa) {
BXE_PRINTF("%s(%d): Invalid magic value (0x%08x) found!\n",
__FILE__, __LINE__, magic);
rc = ENODEV;
goto bxe_nvram_test_exit;
}
/* Read through each region in NVRAM and validate the checksum. */
for (i = 0; nvram_tbl[i].size; i++) {
DBPRINT(sc, BXE_VERBOSE_NVRAM, "%s(): Testing NVRAM region %d, "
"starting offset = %d, length = %d\n", __FUNCTION__, i,
nvram_tbl[i].offset, nvram_tbl[i].size);
rc = bxe_nvram_read(sc, nvram_tbl[i].offset, data,
nvram_tbl[i].size);
if (rc) {
BXE_PRINTF("%s(%d): Error (%d) returned reading NVRAM "
"region %d!\n", __FILE__, __LINE__, rc, i);
goto bxe_nvram_test_exit;
}
csum = ether_crc32_le(data, nvram_tbl[i].size);
if (csum != BXE_CRC32_RESIDUAL) {
BXE_PRINTF("%s(%d): Checksum error (0x%08X) for NVRAM "
"region %d!\n", __FILE__, __LINE__, csum, i);
rc = ENODEV;
goto bxe_nvram_test_exit;
}
}
bxe_nvram_test_exit:
DBEXIT(BXE_VERBOSE_NVRAM);
return (rc);
}
/*
* Acknowledge status block and modify interrupt mode.
*
* Returns:
* None.
*/
static __inline void
bxe_ack_sb(struct bxe_softc *sc, uint8_t sb_id, uint8_t storm, uint16_t index,
uint8_t int_mode, uint8_t update)
{
struct igu_ack_register igu_ack;
uint32_t hc_addr;
hc_addr = (HC_REG_COMMAND_REG + BP_PORT(sc) * 32 + COMMAND_REG_INT_ACK);
igu_ack.status_block_index = index;
igu_ack.sb_id_and_flags =
((sb_id << IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT) |
(storm << IGU_ACK_REGISTER_STORM_ID_SHIFT) |
(update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) |
(int_mode << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT));
rmb();
REG_WR(sc, hc_addr, (*(uint32_t *) &igu_ack));
wmb();
}
/*
* Update fastpath status block index.
*
* Returns:
* 0 = Nu completes, 1 = TX completes, 2 = RX completes,
* 3 = RX & TX completes
*/
static __inline uint16_t
bxe_update_fpsb_idx(struct bxe_fastpath *fp)
{
struct host_status_block *fpsb;
uint16_t rc;
fpsb = fp->status_block;
rc = 0;
rmb();
/* Check for any CSTORM transmit completions. */
if (fp->fp_c_idx != le16toh(fpsb->c_status_block.status_block_index)) {
fp->fp_c_idx = le16toh(fpsb->c_status_block.status_block_index);
rc |= 0x1;
}
/* Check for any USTORM receive completions. */
if (fp->fp_u_idx != le16toh(fpsb->u_status_block.status_block_index)) {
fp->fp_u_idx = le16toh(fpsb->u_status_block.status_block_index);
rc |= 0x2;
}
return (rc);
}
/*
* Acknowledge interrupt.
*
* Returns:
* Interrupt value read from IGU.
*/
static uint16_t
bxe_ack_int(struct bxe_softc *sc)
{
uint32_t hc_addr, result;
hc_addr = HC_REG_COMMAND_REG + BP_PORT(sc) * 32 + COMMAND_REG_SIMD_MASK;
result = REG_RD(sc, hc_addr);
DBPRINT(sc, BXE_INSANE_INTR, "%s(): Read 0x%08X from HC addr 0x%08X\n",
__FUNCTION__, result, hc_addr);
return (result);
}
/*
* Slowpath event handler.
*
* Checks that a ramrod completion occurs while the
* controller is in the proper state.
*
* Returns:
* None.
*/
static void
bxe_sp_event(struct bxe_fastpath *fp, union eth_rx_cqe *rr_cqe)
{
struct bxe_softc *sc;
int cid, command;
sc = fp->sc;
DBENTER(BXE_VERBOSE_RAMROD);
cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
DBPRINT(sc, BXE_VERBOSE_RAMROD, "%s(): CID = %d, ramrod command = %d, "
"device state = 0x%08X, fp[%02d].state = 0x%08X, type = %d\n",
__FUNCTION__, cid, command, sc->state, fp->index, fp->state,
rr_cqe->ramrod_cqe.ramrod_type);
/* Free up an entry on the slowpath queue. */
sc->spq_left++;
/* Handle ramrod commands that completed on a client connection. */
if (fp->index) {
/* Check for a completion for the current state. */
switch (command | fp->state) {
case (RAMROD_CMD_ID_ETH_CLIENT_SETUP | BXE_FP_STATE_OPENING):
DBPRINT(sc, BXE_VERBOSE_RAMROD,
"%s(): Completed fp[%02d] CLIENT_SETUP Ramrod.\n",
__FUNCTION__, cid);
fp->state = BXE_FP_STATE_OPEN;
break;
case (RAMROD_CMD_ID_ETH_HALT | BXE_FP_STATE_HALTING):
DBPRINT(sc, BXE_VERBOSE_RAMROD,
"%s(): Completed fp[%02d] ETH_HALT ramrod\n",
__FUNCTION__, cid);
fp->state = BXE_FP_STATE_HALTED;
break;
default:
DBPRINT(sc, BXE_VERBOSE_RAMROD,
"%s(): Unexpected microcode reply (%d) while "
"in state 0x%04X!\n", __FUNCTION__, command,
fp->state);
}
goto bxe_sp_event_exit;
}
/* Handle ramrod commands that completed on the leading connection. */
switch (command | sc->state) {
case (RAMROD_CMD_ID_ETH_PORT_SETUP | BXE_STATE_OPENING_WAIT4_PORT):
DBPRINT(sc, BXE_VERBOSE_RAMROD,
"%s(): Completed PORT_SETUP ramrod.\n", __FUNCTION__);
sc->state = BXE_STATE_OPEN;
break;
case (RAMROD_CMD_ID_ETH_HALT | BXE_STATE_CLOSING_WAIT4_HALT):
DBPRINT(sc, BXE_VERBOSE_RAMROD,
"%s(): Completed ETH_HALT ramrod.\n", __FUNCTION__);
sc->state = BXE_STATE_CLOSING_WAIT4_DELETE;
fp->state = BXE_FP_STATE_HALTED;
break;
case (RAMROD_CMD_ID_ETH_CFC_DEL | BXE_STATE_CLOSING_WAIT4_HALT):
DBPRINT(sc, BXE_VERBOSE_RAMROD,
"%s(): Completed fp[%02d] ETH_CFC_DEL ramrod.\n",
__FUNCTION__, cid);
sc->fp[cid].state = BXE_FP_STATE_CLOSED;
break;
case (RAMROD_CMD_ID_ETH_SET_MAC | BXE_STATE_OPEN):
DBPRINT(sc, BXE_VERBOSE_RAMROD,
"%s(): Completed ETH_SET_MAC ramrod in STATE_OPEN state.\n",
__FUNCTION__);
break;
case (RAMROD_CMD_ID_ETH_SET_MAC | BXE_STATE_CLOSING_WAIT4_HALT):
DBPRINT(sc, BXE_VERBOSE_RAMROD,
"%s(): Completed ETH_SET_MAC ramrod in "
"CLOSING_WAIT4_HALT state.\n", __FUNCTION__);
break;
default:
DBPRINT(sc, BXE_FATAL, "%s(): Unexpected microcode reply (%d)! "
"State is 0x%08X\n", __FUNCTION__, command, sc->state);
}
bxe_sp_event_exit:
/* Force bxe_wait_ramrod() to see the change. */
mb();
DBEXIT(BXE_VERBOSE_RAMROD);
}
/*
* Lock access to a hardware resource using controller arbitration
* register.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_acquire_hw_lock(struct bxe_softc *sc, uint32_t resource)
{
uint32_t hw_lock_control_reg, lock_status, resource_bit;
uint8_t func;
int cnt, rc;
DBENTER(BXE_VERBOSE_MISC);
DBPRINT(sc, BXE_VERBOSE_MISC, "%s(): Locking resource 0x%08X\n",
__FUNCTION__, resource);
func = BP_FUNC(sc);
resource_bit = 1 << resource;
rc = 0;
hw_lock_control_reg = ((func <= 5) ?
(MISC_REG_DRIVER_CONTROL_1 + func * 8) :
(MISC_REG_DRIVER_CONTROL_7 + (func - 6) * 8));
/* Validating that the resource is within range. */
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
DBPRINT(sc, BXE_WARN, "%s(): Resource is out of range! "
"resource(0x%08X) > HW_LOCK_MAX_RESOURCE_VALUE(0x%08X)\n",
__FUNCTION__, resource, HW_LOCK_MAX_RESOURCE_VALUE);
rc = EINVAL;
goto bxe_acquire_hw_lock_exit;
}
/* Validating that the resource is not already taken. */
lock_status = REG_RD(sc, hw_lock_control_reg);
if (lock_status & resource_bit) {
DBPRINT(sc, BXE_WARN, "%s(): Failed to acquire lock! "
"lock_status = 0x%08X, resource_bit = 0x%08X\n",
__FUNCTION__, lock_status, resource_bit);
rc = EEXIST;
goto bxe_acquire_hw_lock_exit;
}
/* Try for 5 seconds every 5ms. */
for (cnt = 0; cnt < 1000; cnt++) {
/* Try to acquire the lock. */
REG_WR(sc, hw_lock_control_reg + 4, resource_bit);
lock_status = REG_RD(sc, hw_lock_control_reg);
if (lock_status & resource_bit)
goto bxe_acquire_hw_lock_exit;
DELAY(5000);
}
DBPRINT(sc, BXE_WARN, "%s(): Timeout!\n", __FUNCTION__);
rc = EAGAIN;
bxe_acquire_hw_lock_exit:
DBEXIT(BXE_VERBOSE_MISC);
return (rc);
}
/*
* Unlock access to a hardware resource using controller arbitration
* register.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_release_hw_lock(struct bxe_softc *sc, uint32_t resource)
{
uint32_t hw_lock_control_reg, lock_status, resource_bit;
uint8_t func;
int rc;
DBENTER(BXE_VERBOSE_MISC);
DBPRINT(sc, BXE_VERBOSE_MISC, "%s(): Unlocking resource 0x%08X\n",
__FUNCTION__, resource);
resource_bit = 1 << resource;
func = BP_FUNC(sc);
rc = 0;
/* Validating that the resource is within range */
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
DBPRINT(sc, BXE_WARN, "%s(): Resource is out of range! "
"resource(0x%08X) > HW_LOCK_MAX_RESOURCE_VALUE(0x%08X)\n",
__FUNCTION__, resource, HW_LOCK_MAX_RESOURCE_VALUE);
rc = EINVAL;
goto bxe_release_hw_lock_exit;
}
/* Find the register for the resource lock. */
hw_lock_control_reg = ((func <= 5) ?
(MISC_REG_DRIVER_CONTROL_1 + func * 8) :
(MISC_REG_DRIVER_CONTROL_7 + (func - 6) * 8));
/* Validating that the resource is currently taken */
lock_status = REG_RD(sc, hw_lock_control_reg);
if (!(lock_status & resource_bit)) {
DBPRINT(sc, BXE_WARN, "%s(): The resource is not currently "
"locked! lock_status = 0x%08X, resource_bit = 0x%08X\n",
__FUNCTION__, lock_status, resource_bit);
rc = EFAULT;
goto bxe_release_hw_lock_exit;
}
/* Free the hardware lock. */
REG_WR(sc, hw_lock_control_reg, resource_bit);
bxe_release_hw_lock_exit:
DBEXIT(BXE_VERBOSE_MISC);
return (rc);
}
int
bxe_get_gpio(struct bxe_softc *sc, int gpio_num, uint8_t port)
{
uint32_t gpio_mask, gpio_reg;
int gpio_port, gpio_shift, value;
/* The GPIO should be swapped if swap register is set and active */
gpio_port = (REG_RD(sc, NIG_REG_PORT_SWAP) && REG_RD(sc,
NIG_REG_STRAP_OVERRIDE)) ^ port;
gpio_shift = gpio_num +
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
gpio_mask = 1 << gpio_shift;
if (gpio_num > MISC_REGISTERS_GPIO_3) {
DBPRINT(sc, BXE_WARN, "%s(): Invalid GPIO %d\n",
__FUNCTION__, gpio_num);
return (-EINVAL);
}
/* read GPIO value */
gpio_reg = REG_RD(sc, MISC_REG_GPIO);
/* get the requested pin value */
if ((gpio_reg & gpio_mask) == gpio_mask)
value = 1;
else
value = 0;
DBPRINT(sc, BXE_VERBOSE_PHY, "pin %d value 0x%x\n", gpio_num, value);
return (value);
}
/*
* Sets the state of a General Purpose I/O (GPIO).
*
* Returns:
* None.
*/
int
bxe_set_gpio(struct bxe_softc *sc, int gpio_num, uint32_t mode, uint8_t port)
{
uint32_t gpio_reg, gpio_mask;
int gpio_port, gpio_shift, rc;
DBENTER(BXE_VERBOSE_MISC);
/* The GPIO should be swapped if swap register is set and active. */
gpio_port = (REG_RD(sc, NIG_REG_PORT_SWAP) && REG_RD(sc,
NIG_REG_STRAP_OVERRIDE)) ^ port;
gpio_shift = gpio_num +
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
gpio_mask = (1 << gpio_shift);
rc = 0;
if (gpio_num > MISC_REGISTERS_GPIO_3) {
DBPRINT(sc, BXE_FATAL, "%s(): Invalid GPIO (%d)!\n",
__FUNCTION__, gpio_num);
rc = EINVAL;
goto bxe_set_gpio_exit;
}
/* Make sure no one else is trying to use the GPIO. */
rc = bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
if (rc) {
DBPRINT(sc, BXE_WARN, "%s(): Can't acquire GPIO lock!\n",
__FUNCTION__);
goto bxe_set_gpio_exit;
}
/* Read GPIO and mask all but the float bits. */
gpio_reg = (REG_RD(sc, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
switch (mode) {
case MISC_REGISTERS_GPIO_OUTPUT_LOW:
DBPRINT(sc, BXE_VERBOSE, "%s(): Set GPIO %d (shift %d) -> "
"output low\n", __FUNCTION__, gpio_num, gpio_shift);
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
break;
case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
DBPRINT(sc, BXE_VERBOSE, "%s(): Set GPIO %d (shift %d) -> "
"output high\n", __FUNCTION__, gpio_num, gpio_shift);
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
break;
case MISC_REGISTERS_GPIO_INPUT_HI_Z:
DBPRINT(sc, BXE_VERBOSE, "%s(): Set GPIO %d (shift %d) -> "
"input\n", __FUNCTION__, gpio_num, gpio_shift);
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
break;
default:
DBPRINT(sc, BXE_FATAL, "%s(): Unknown GPIO mode (0x%08X)!\n",
__FUNCTION__, mode);
break;
}
REG_WR(sc, MISC_REG_GPIO, gpio_reg);
rc = bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
if (rc) {
DBPRINT(sc, BXE_WARN, "%s(): Can't release GPIO lock!\n",
__FUNCTION__);
}
bxe_set_gpio_exit:
DBEXIT(BXE_VERBOSE_MISC);
return (rc);
}
int
bxe_set_gpio_int(struct bxe_softc *sc, int gpio_num, uint32_t mode,
uint8_t port)
{
uint32_t gpio_mask, gpio_reg;
int gpio_port, gpio_shift;
/* The GPIO should be swapped if swap register is set and active */
gpio_port = (REG_RD(sc, NIG_REG_PORT_SWAP) && REG_RD(sc,
NIG_REG_STRAP_OVERRIDE)) ^ port;
gpio_shift = gpio_num +
(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
gpio_mask = (1 << gpio_shift);
if (gpio_num > MISC_REGISTERS_GPIO_3) {
DBPRINT(sc, BXE_WARN, "%s(): Invalid GPIO %d\n",
__FUNCTION__, gpio_num);
return (-EINVAL);
}
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
/* read GPIO int */
gpio_reg = REG_RD(sc, MISC_REG_GPIO_INT);
switch (mode) {
case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
DBPRINT(sc, BXE_VERBOSE_PHY, "Clear GPIO INT %d (shift %d) -> "
"output low\n", gpio_num, gpio_shift);
/* clear SET and set CLR */
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
break;
case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
DBPRINT(sc, BXE_VERBOSE_PHY, "Set GPIO INT %d (shift %d) -> "
"output high\n", gpio_num, gpio_shift);
/* clear CLR and set SET */
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
break;
default:
break;
}
REG_WR(sc, MISC_REG_GPIO_INT, gpio_reg);
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
return (0);
}
/*
* Sets the state of a Shared Purpose I/O (SPIO).
*
* Returns:
* 0 = Success, !0 = Failure.
*/
int
bxe_set_spio(struct bxe_softc *sc, int spio_num, uint32_t mode)
{
uint32_t spio_reg, spio_mask;
int rc;
rc = 0;
spio_mask = 1 << spio_num;
/* Validate the SPIO. */
if ((spio_num < MISC_REGISTERS_SPIO_4) ||
(spio_num > MISC_REGISTERS_SPIO_7)) {
DBPRINT(sc, BXE_WARN, "%s(): Invalid SPIO (%d)!\n",
__FUNCTION__, spio_num);
rc = EINVAL;
goto bxe_set_spio_exit;
}
rc = bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
if (rc) {
DBPRINT(sc, BXE_WARN, "%s(): Can't acquire SPIO lock!\n",
__FUNCTION__);
goto bxe_set_spio_exit;
}
/* Read SPIO and mask all but the float bits. */
spio_reg = (REG_RD(sc, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
switch (mode) {
case MISC_REGISTERS_SPIO_OUTPUT_LOW :
DBPRINT(sc, BXE_VERBOSE_MISC, "%s(): Set SPIO %d -> "
"output low\n", __FUNCTION__, spio_num);
spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
break;
case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
DBPRINT(sc, BXE_VERBOSE_MISC, "%s(): Set SPIO %d -> "
"output high\n", __FUNCTION__, spio_num);
spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
break;
case MISC_REGISTERS_SPIO_INPUT_HI_Z:
DBPRINT(sc, BXE_VERBOSE_MISC, "%s(): Set SPIO %d -> "
"input\n", __FUNCTION__, spio_num);
spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
break;
default:
DBPRINT(sc, BXE_WARN, "%s(): Unknown SPIO mode (0x%08X)!\n",
__FUNCTION__, mode);
break;
}
REG_WR(sc, MISC_REG_SPIO, spio_reg);
rc = bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
if (rc) {
DBPRINT(sc, BXE_WARN, "%s(): Can't release SPIO lock!\n",
__FUNCTION__);
}
bxe_set_spio_exit:
return (rc);
}
/*
* When the 57711E is operating in multi-function mode, the controller
* must be configured to arbitrate TX between multiple VNICs.
*
* Returns:
* None.
*/
static void
bxe_init_port_minmax(struct bxe_softc *sc)
{
uint32_t fair_periodic_timeout_usec, r_param, t_fair;
DBENTER(BXE_VERBOSE_MISC);
r_param = sc->link_vars.line_speed / 8;
memset(&(sc->cmng.rs_vars), 0,
sizeof(struct rate_shaping_vars_per_port));
memset(&(sc->cmng.fair_vars), 0, sizeof(struct fairness_vars_per_port));
/* 100 usec in SDM ticks = 25 since each tick is 4 usec. */
sc->cmng.rs_vars.rs_periodic_timeout = RS_PERIODIC_TIMEOUT_USEC / 4;
/*
* This is the threshold below which no timer arming will occur.
* We use a coefficient of 1, 25 so that the threshold is a
* little bigger that real time to compensate for timer
* in-accuracy.
*/
sc->cmng.rs_vars.rs_threshold = (RS_PERIODIC_TIMEOUT_USEC *
r_param * 5) / 4;
/* Resolution of fairness timer. */
fair_periodic_timeout_usec = QM_ARB_BYTES / r_param;
/* For 10G it is 1000us, for 1G it is 10000us. */
t_fair = T_FAIR_COEF / sc->link_vars.line_speed;
/* This is the threshold where we won't arm the timer
anymore. */
sc->cmng.fair_vars.fair_threshold = QM_ARB_BYTES;
/*
* Multiply by 1e3/8 to get bytes/msec. We don't want the
* credits to pass a credit of the T_FAIR*FAIR_MEM (algorithm
* resolution)
*/
sc->cmng.fair_vars.upper_bound = r_param * t_fair * FAIR_MEM;
/* Since each tick is 4 us. */
sc->cmng.fair_vars.fairness_timeout = fair_periodic_timeout_usec / 4;
DBEXIT(BXE_VERBOSE_MISC);
}
/*
* This function is called when a link interrupt is generated
* and configures the controller for the new link state.
*
* Returns:
* None.
*/
static void
bxe_link_attn(struct bxe_softc *sc)
{
struct host_port_stats *pstats;
uint32_t pause_enabled;
int func, i, port, vn;
DBENTER(BXE_VERBOSE_PHY);
/* Make sure that we are synced with the current statistics. */
bxe_stats_handle(sc, STATS_EVENT_STOP);
bxe_link_update(&sc->link_params, &sc->link_vars);
if (sc->link_vars.link_up) {
if (CHIP_IS_E1H(sc)) {
port = BP_PORT(sc);
pause_enabled = 0;
if (sc->link_vars.flow_ctrl & FLOW_CTRL_TX)
pause_enabled = 1;
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_ETH_PAUSE_ENABLED_OFFSET(port),
pause_enabled);
}
if (sc->link_vars.mac_type == MAC_TYPE_BMAC) {
pstats = BXE_SP(sc, port_stats);
/* Reset old BMAC statistics. */
memset(&(pstats->mac_stx[0]), 0,
sizeof(struct mac_stx));
}
if ((sc->state == BXE_STATE_OPEN) ||
(sc->state == BXE_STATE_DISABLED))
bxe_stats_handle(sc, STATS_EVENT_LINK_UP);
}
/* Need additional handling for multi-function devices. */
if (IS_E1HMF(sc)) {
port = BP_PORT(sc);
if (sc->link_vars.link_up) {
if (sc->dcc_enable == TRUE) {
bxe_congestionmgmt(sc, TRUE);
/* Store in internal memory. */
for (i = 0; i <
sizeof(struct cmng_struct_per_port) / 4;
i++) {
REG_WR(sc, BAR_XSTORM_INTMEM +
XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) + (i*4),
((uint32_t *)(&sc->cmng))[i]);
}
}
}
for (vn = VN_0; vn < E1HVN_MAX; vn++) {
/* Don't send an attention to ourselves. */
if (vn == BP_E1HVN(sc))
continue;
func = ((vn << 1) | port);
/*
* Send an attention to other drivers on the same port.
*/
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_0 +
(LINK_SYNC_ATTENTION_BIT_FUNC_0 + func) * 4, 1);
}
}
DBEXIT(BXE_VERBOSE_PHY);
}
/*
* Sets the driver instance as the port management function (PMF).
*
* This is only used on "multi-function" capable devices such as the
* 57711E and initializes the controller so that the PMF driver instance
* can interact with other driver instances that may be operating on
* the same Ethernet port.
*
* Returns:
* None.
*/
static void
bxe_pmf_update(struct bxe_softc *sc)
{
uint32_t val;
int port;
/* Record that this driver instance is managing the port. */
sc->port.pmf = 1;
DBPRINT(sc, BXE_INFO, "%s(): Enabling this port as PMF.\n",
__FUNCTION__);
/* Enable NIG attention. */
port = BP_PORT(sc);
val = (0xff0f | (1 << (BP_E1HVN(sc) + 4)));
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, val);
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, val);
bxe_stats_handle(sc, STATS_EVENT_PMF);
}
/* 8073 Download definitions */
/* spi Parameters.*/
#define SPI_CTRL_1_L 0xC000
#define SPI_CTRL_1_H 0xC002
#define SPI_CTRL_2_L 0xC400
#define SPI_CTRL_2_H 0xC402
#define SPI_TXFIFO 0xD000
#define SPI_RXFIFO 0xD400
/* Input Command Messages.*/
/*
* Write CPU/SPI Control Regs, followed by Count And CPU/SPI Controller
* Reg add/data pairs.
*/
#define WR_CPU_CTRL_REGS 0x11
/*
* Read CPU/SPI Control Regs, followed by Count and CPU/SPI Controller
* Register Add.
*/
#define RD_CPU_CTRL_REGS 0xEE
/*
* Write CPU/SPI Control Regs Continously, followed by Count and
* CPU/SPI Controller Reg addr and data's.
*/
#define WR_CPU_CTRL_FIFO 0x66
/* Output Command Messages.*/
#define DONE 0x4321
/* SPI Controller Commands (known As messages).*/
#define MSGTYPE_HWR 0x40
#define MSGTYPE_HRD 0x80
#define WRSR_OPCODE 0x01
#define WR_OPCODE 0x02
#define RD_OPCODE 0x03
#define WRDI_OPCODE 0x04
#define RDSR_OPCODE 0x05
#define WREN_OPCODE 0x06
#define WR_BLOCK_SIZE 0x40 /* Maximum 64 Bytes Writes.*/
/*
* Post a slowpath command.
*
* A slowpath command is used to propogate a configuration change through
* the controller in a controlled manner, allowing each STORM processor and
* other H/W blocks to phase in the change. The commands sent on the
* slowpath are referred to as ramrods. Depending on the ramrod used the
* completion of the ramrod will occur in different ways. Here's a
* breakdown of ramrods and how they complete:
*
* RAMROD_CMD_ID_ETH_PORT_SETUP
* Used to setup the leading connection on a port. Completes on the
* Receive Completion Queue (RCQ) of that port (typically fp[0]).
*
* RAMROD_CMD_ID_ETH_CLIENT_SETUP
* Used to setup an additional connection on a port. Completes on the
* RCQ of the multi-queue/RSS connection being initialized.
*
* RAMROD_CMD_ID_ETH_STAT_QUERY
* Used to force the storm processors to update the statistics database
* in host memory. This ramrod is send on the leading connection CID and
* completes as an index increment of the CSTORM on the default status
* block.
*
* RAMROD_CMD_ID_ETH_UPDATE
* Used to update the state of the leading connection, usually to udpate
* the RSS indirection table. Completes on the RCQ of the leading
* connection. (Not currently used under FreeBSD until OS support becomes
* available.)
*
* RAMROD_CMD_ID_ETH_HALT
* Used when tearing down a connection prior to driver unload. Completes
* on the RCQ of the multi-queue/RSS connection being torn down. Don't
* use this on the leading connection.
*
* RAMROD_CMD_ID_ETH_SET_MAC
* Sets the Unicast/Broadcast/Multicast used by the port. Completes on
* the RCQ of the leading connection.
*
* RAMROD_CMD_ID_ETH_CFC_DEL
* Used when tearing down a conneciton prior to driver unload. Completes
* on the RCQ of the leading connection (since the current connection
* has been completely removed from controller memory).
*
* RAMROD_CMD_ID_ETH_PORT_DEL
* Used to tear down the leading connection prior to driver unload,
* typically fp[0]. Completes as an index increment of the CSTORM on the
* default status block.
*
* RAMROD_CMD_ID_ETH_FORWARD_SETUP
* Used for connection offload. Completes on the RCQ of the multi-queue
* RSS connection that is being offloaded. (Not currently used under
* FreeBSD.)
*
* There can only be one command pending per function.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_sp_post(struct bxe_softc *sc, int command, int cid, uint32_t data_hi,
uint32_t data_lo, int common)
{
int func, rc;
DBRUNMSG((BXE_EXTREME_LOAD | BXE_EXTREME_RESET |
BXE_EXTREME_UNLOAD | BXE_EXTREME_RAMROD),
bxe_decode_ramrod_cmd(sc, command));
DBPRINT(sc, BXE_VERBOSE_RAMROD, "%s(): cid = %d, data_hi = 0x%08X, "
"data_low = 0x%08X, remaining spq entries = %d\n", __FUNCTION__,
cid, data_hi, data_lo, sc->spq_left);
rc = 0;
/* Skip all slowpath commands if the driver has panic'd. */
if (sc->panic) {
rc = EIO;
goto bxe_sp_post_exit;
}
BXE_SP_LOCK(sc);
/* We are limited to 8 slowpath commands. */
if (!sc->spq_left) {
BXE_PRINTF("%s(%d): Slowpath queue is full!\n",
__FILE__, __LINE__);
bxe_panic_dump(sc);
rc = EBUSY;
goto bxe_sp_post_exit;
}
/* Encode the CID with the command. */
sc->spq_prod_bd->hdr.conn_and_cmd_data =
htole32(((command << SPE_HDR_CMD_ID_SHIFT) | HW_CID(sc, cid)));
sc->spq_prod_bd->hdr.type = htole16(ETH_CONNECTION_TYPE);
if (common)
sc->spq_prod_bd->hdr.type |=
htole16((1 << SPE_HDR_COMMON_RAMROD_SHIFT));
/* Point the hardware at the new configuration data. */
sc->spq_prod_bd->data.mac_config_addr.hi = htole32(data_hi);
sc->spq_prod_bd->data.mac_config_addr.lo = htole32(data_lo);
/* Reduce the number of available slots for slowpath commands. */
sc->spq_left--;
/* Manage the end of the ring. */
if (sc->spq_prod_bd == sc->spq_last_bd) {
sc->spq_prod_bd = sc->spq;
sc->spq_prod_idx = 0;
DBPRINT(sc, BXE_VERBOSE, "%s(): End of slowpath queue.\n",
__FUNCTION__);
} else {
sc->spq_prod_bd++;
sc->spq_prod_idx++;
}
func = BP_FUNC(sc);
/* Kick off the slowpath command. */
REG_WR(sc, BAR_XSTORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
sc->spq_prod_idx);
bxe_sp_post_exit:
BXE_SP_UNLOCK(sc);
return (rc);
}
/*
* Acquire the MCP access lock.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_acquire_alr(struct bxe_softc *sc)
{
uint32_t val;
int i, rc, retries;
DBENTER(BXE_VERBOSE_MISC);
rc = 0;
retries = 100;
/* Acquire lock using mcpr_access_lock SPLIT register. */
for (i = 0; i < retries * 10; i++) {
val = 1UL << 31;
REG_WR(sc, GRCBASE_MCP + 0x9c, val);
val = REG_RD(sc, GRCBASE_MCP + 0x9c);
if (val & (1L << 31))
break;
DELAY(5000);
}
if (!(val & (1L << 31))) {
DBPRINT(sc, BXE_WARN,
"%s(): Cannot acquire MCP split access lock.\n",
__FUNCTION__);
rc = EBUSY;
}
DBEXIT(BXE_VERBOSE_MISC);
return (rc);
}
/*
* Release the MCP access lock.
*
* Returns:
* None.
*/
static void
bxe_release_alr(struct bxe_softc* sc)
{
DBENTER(BXE_VERBOSE_MISC);
REG_WR(sc, GRCBASE_MCP + 0x9c, 0);
DBEXIT(BXE_VERBOSE_MISC);
}
/*
* Update driver's copies of the values in the host default status block.
*
* Returns:
* Bitmap indicating changes to the block.
*/
static __inline uint16_t
bxe_update_dsb_idx(struct bxe_softc *sc)
{
struct host_def_status_block *dsb;
uint16_t rc;
rc = 0;
dsb = sc->def_sb;
/* Read memory barrier since block is written by hardware. */
rmb();
if (sc->def_att_idx !=
le16toh(dsb->atten_status_block.attn_bits_index)) {
sc->def_att_idx =
le16toh(dsb->atten_status_block.attn_bits_index);
rc |= 0x1;
}
if (sc->def_c_idx !=
le16toh(dsb->c_def_status_block.status_block_index)) {
sc->def_c_idx =
le16toh(dsb->c_def_status_block.status_block_index);
rc |= 0x2;
}
if (sc->def_u_idx !=
le16toh(dsb->u_def_status_block.status_block_index)) {
sc->def_u_idx =
le16toh(dsb->u_def_status_block.status_block_index);
rc |= 0x4;
}
if (sc->def_x_idx !=
le16toh(dsb->x_def_status_block.status_block_index)) {
sc->def_x_idx =
le16toh(dsb->x_def_status_block.status_block_index);
rc |= 0x8;
}
if (sc->def_t_idx !=
le16toh(dsb->t_def_status_block.status_block_index)) {
sc->def_t_idx =
le16toh(dsb->t_def_status_block.status_block_index);
rc |= 0x10;
}
return (rc);
}
/*
* Handle any attentions that have been newly asserted.
*
* Returns:
* None
*/
static void
bxe_attn_int_asserted(struct bxe_softc *sc, uint32_t asserted)
{
uint32_t aeu_addr, hc_addr, nig_int_mask_addr;
uint32_t aeu_mask, nig_mask;
int port, rc;
DBENTER(BXE_VERBOSE_INTR);
port = BP_PORT(sc);
hc_addr = (HC_REG_COMMAND_REG + port * 32 + COMMAND_REG_ATTN_BITS_SET);
aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
MISC_REG_AEU_MASK_ATTN_FUNC_0;
nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
NIG_REG_MASK_INTERRUPT_PORT0;
nig_mask = 0;
if (sc->attn_state & asserted)
BXE_PRINTF("%s(%d): IGU attention ERROR!\n",
__FILE__, __LINE__);
rc = bxe_acquire_hw_lock(sc,
HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
if (rc) {
DBPRINT(sc, BXE_WARN,
"%s(): Failed to acquire attention lock for port %d!\n",
__FUNCTION__, port);
goto bxe_attn_int_asserted_exit;
}
aeu_mask = REG_RD(sc, aeu_addr);
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): aeu_mask = 0x%08X, newly asserted = 0x%08X\n", __FUNCTION__,
aeu_mask, asserted);
aeu_mask &= ~(asserted & 0xff);
DBPRINT(sc, BXE_VERBOSE_INTR, "%s(): new mask = 0x%08X\n", __FUNCTION__,
aeu_mask);
REG_WR(sc, aeu_addr, aeu_mask);
rc = bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
if (rc) {
DBPRINT(sc, BXE_WARN,
"%s(): Failed to release attention lock!\n", __FUNCTION__);
goto bxe_attn_int_asserted_exit;
}
DBPRINT(sc, BXE_VERBOSE_INTR, "%s(): attn_state = 0x%08X\n",
__FUNCTION__, sc->attn_state);
sc->attn_state |= asserted;
DBPRINT(sc, BXE_VERBOSE_INTR, "%s(): new attn_state = 0x%08X\n",
__FUNCTION__, sc->attn_state);
if (asserted & ATTN_HARD_WIRED_MASK) {
if (asserted & ATTN_NIG_FOR_FUNC) {
bxe_acquire_phy_lock(sc);
/* Save NIG interrupt mask. */
nig_mask = REG_RD(sc, nig_int_mask_addr);
REG_WR(sc, nig_int_mask_addr, 0);
bxe_link_attn(sc);
}
if (asserted & ATTN_SW_TIMER_4_FUNC)
DBPRINT(sc, BXE_WARN, "%s(): ATTN_SW_TIMER_4_FUNC!\n",
__FUNCTION__);
if (asserted & GPIO_2_FUNC)
DBPRINT(sc, BXE_WARN, "%s(): GPIO_2_FUNC!\n",
__FUNCTION__);
if (asserted & GPIO_3_FUNC)
DBPRINT(sc, BXE_WARN, "%s(): GPIO_3_FUNC!\n",
__FUNCTION__);
if (asserted & GPIO_4_FUNC)
DBPRINT(sc, BXE_WARN, "%s(): GPIO_4_FUNC!\n",
__FUNCTION__);
if (port == 0) {
if (asserted & ATTN_GENERAL_ATTN_1) {
DBPRINT(sc, BXE_WARN,
"%s(): ATTN_GENERAL_ATTN_1!\n",
__FUNCTION__);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
}
if (asserted & ATTN_GENERAL_ATTN_2) {
DBPRINT(sc, BXE_WARN,
"%s(): ATTN_GENERAL_ATTN_2!\n",
__FUNCTION__);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
}
if (asserted & ATTN_GENERAL_ATTN_3) {
DBPRINT(sc, BXE_WARN,
"%s(): ATTN_GENERAL_ATTN_3!\n",
__FUNCTION__);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
}
} else {
if (asserted & ATTN_GENERAL_ATTN_4) {
DBPRINT(sc, BXE_WARN,
"%s(): ATTN_GENERAL_ATTN_4!\n",
__FUNCTION__);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
}
if (asserted & ATTN_GENERAL_ATTN_5) {
DBPRINT(sc, BXE_WARN,
"%s(): ATTN_GENERAL_ATTN_5!\n",
__FUNCTION__);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
}
if (asserted & ATTN_GENERAL_ATTN_6) {
DBPRINT(sc, BXE_WARN,
"%s(): ATTN_GENERAL_ATTN_6!\n",
__FUNCTION__);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
}
}
}
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): Writing 0x%08X to HC addr 0x%08X\n", __FUNCTION__,
asserted, hc_addr);
REG_WR(sc, hc_addr, asserted);
/* Now set back the NIG mask. */
if (asserted & ATTN_NIG_FOR_FUNC) {
REG_WR(sc, nig_int_mask_addr, nig_mask);
bxe_release_phy_lock(sc);
}
bxe_attn_int_asserted_exit:
DBEXIT(BXE_VERBOSE_INTR);
}
/*
* Handle any attentions that have been newly deasserted.
*
* Returns:
* None
*/
static __inline void
bxe_attn_int_deasserted0(struct bxe_softc *sc, uint32_t attn)
{
uint32_t val, swap_val, swap_override;
int port, reg_offset;
DBENTER(BXE_VERBOSE_INTR);
port = BP_PORT(sc);
reg_offset = port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
/* Handle SPIO5 attention. */
if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
val = REG_RD(sc, reg_offset);
val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
REG_WR(sc, reg_offset, val);
DBPRINT(sc, BXE_FATAL, "%s(): SPIO5 H/W attention!\n",
__FUNCTION__);
/* Fan failure attention */
switch (XGXS_EXT_PHY_TYPE(sc->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
/*
* SPIO5 is used on A1022G boards to indicate
* fan failure. Shutdown the controller and
* associated PHY to avoid damage.
*/
/* Low power mode is controled by GPIO 2. */
bxe_set_gpio(sc, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
/* PHY reset is controled by GPIO 1. */
bxe_set_gpio(sc, MISC_REGISTERS_GPIO_1,
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
/*
* The PHY reset is controlled by GPIO 1.
* Fake the port number to cancel the swap done in
* set_gpio().
*/
swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
port = (swap_val && swap_override) ^ 1;
bxe_set_gpio(sc, MISC_REGISTERS_GPIO_1,
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
break;
default:
break;
}
/* Mark the failure. */
sc->link_params.ext_phy_config &=
~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
sc->link_params.ext_phy_config |=
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
SHMEM_WR(sc, dev_info.port_hw_config[port].external_phy_config,
sc->link_params.ext_phy_config);
/* Log the failure */
BXE_PRINTF("A fan failure has caused the driver to "
"shutdown the device to prevent permanent damage.\n");
}
if (attn & (AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 |
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1)) {
bxe_acquire_phy_lock(sc);
bxe_handle_module_detect_int(&sc->link_params);
bxe_release_phy_lock(sc);
}
/* Checking for an assert on the zero block */
if (attn & HW_INTERRUT_ASSERT_SET_0) {
val = REG_RD(sc, reg_offset);
val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
REG_WR(sc, reg_offset, val);
BXE_PRINTF("%s(%d): FATAL hardware block attention "
"(set0 = 0x%08X)!\n", __FILE__, __LINE__,
(attn & (uint32_t)HW_INTERRUT_ASSERT_SET_0));
bxe_panic_dump(sc);
}
DBEXIT(BXE_VERBOSE_INTR);
}
/*
* Handle any attentions that have been newly deasserted.
*
* Returns:
* None
*/
static __inline void
bxe_attn_int_deasserted1(struct bxe_softc *sc, uint32_t attn)
{
uint32_t val;
int port, reg_offset;
DBENTER(BXE_VERBOSE_INTR);
if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
val = REG_RD(sc, DORQ_REG_DORQ_INT_STS_CLR);
DBPRINT(sc, BXE_FATAL,
"%s(): Doorbell hardware attention (0x%08X).\n",
__FUNCTION__, val);
/* DORQ discard attention */
if (val & 0x2)
DBPRINT(sc, BXE_FATAL,
"%s(): FATAL doorbell queue error!\n",
__FUNCTION__);
}
if (attn & HW_INTERRUT_ASSERT_SET_1) {
port = BP_PORT(sc);
reg_offset = port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1;
val = REG_RD(sc, reg_offset);
val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
REG_WR(sc, reg_offset, val);
BXE_PRINTF("%s(%d): FATAL hardware block attention "
"(set1 = 0x%08X)!\n", __FILE__, __LINE__,
(attn & (uint32_t)HW_INTERRUT_ASSERT_SET_1));
bxe_panic_dump(sc);
}
DBEXIT(BXE_VERBOSE_INTR);
}
/*
* Handle any attentions that have been newly deasserted.
*
* Returns:
* None
*/
static __inline void
bxe_attn_int_deasserted2(struct bxe_softc *sc, uint32_t attn)
{
uint32_t val;
int port, reg_offset;
DBENTER(BXE_VERBOSE_INTR);
if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
val = REG_RD(sc, CFC_REG_CFC_INT_STS_CLR);
DBPRINT(sc, BXE_FATAL,
"%s(): CFC hardware attention (0x%08X).\n", __FUNCTION__,
val);
/* CFC error attention. */
if (val & 0x2)
DBPRINT(sc, BXE_FATAL, "%s(): FATAL CFC error!\n",
__FUNCTION__);
}
if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_0);
DBPRINT(sc, BXE_FATAL,
"%s(): PXP hardware attention (0x%08X).\n", __FUNCTION__,
val);
/* RQ_USDMDP_FIFO_OVERFLOW */
if (val & 0x18000)
DBPRINT(sc, BXE_FATAL, "%s(): FATAL PXP error!\n",
__FUNCTION__);
}
if (attn & HW_INTERRUT_ASSERT_SET_2) {
port = BP_PORT(sc);
reg_offset = port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2;
val = REG_RD(sc, reg_offset);
val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
REG_WR(sc, reg_offset, val);
BXE_PRINTF("%s(%d): FATAL hardware block attention (set2 = "
"0x%08X)! port=%d, val written=0x%x attn=0x%x\n", __FILE__,
__LINE__, (attn & (uint32_t)HW_INTERRUT_ASSERT_SET_2),
port, val, attn);
bxe_panic_dump(sc);
}
DBEXIT(BXE_VERBOSE_INTR);
}
/*
* Handle any attentions that have been newly deasserted.
*
* Returns:
* None
*/
static __inline void
bxe_attn_int_deasserted3(struct bxe_softc *sc, uint32_t attn)
{
uint32_t val;
int func;
DBENTER(BXE_VERBOSE_INTR);
if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
/* Look for any port assertions. */
if (attn & BXE_PMF_LINK_ASSERT) {
/*
* We received a message from the driver instance
* that is managing the Ethernet port (link up/down).
* Go ahead and handle it.
*/
func = BP_FUNC(sc);
DBPRINT(sc, BXE_INFO,
"%s(): Received link attention from PMF.\n",
__FUNCTION__);
/* Clear the attention. */
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
sc->mf_config[BP_E1HVN(sc)] =
SHMEM_RD(sc,
mf_cfg.func_mf_config[(sc->bxe_func & 1)].config);
val = SHMEM_RD(sc, func_mb[func].drv_status);
if (sc->dcc_enable == TRUE) {
if (val & DRV_STATUS_DCC_EVENT_MASK)
bxe_dcc_event(sc,
val & DRV_STATUS_DCC_EVENT_MASK);
}
bxe__link_status_update(sc);
if ((sc->port.pmf == 0) && (val & DRV_STATUS_PMF))
bxe_pmf_update(sc);
/* Look for any microcode assertions. */
} else if (attn & BXE_MC_ASSERT_BITS) {
DBPRINT(sc, BXE_FATAL, "%s(): Microcode assert!\n",
__FUNCTION__);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_10, 0);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_9, 0);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_8, 0);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_7, 0);
bxe_panic_dump(sc);
/* Look for any bootcode assertions. */
} else if (attn & BXE_MCP_ASSERT) {
DBPRINT(sc, BXE_FATAL, "%s(): Bootcode assert!\n",
__FUNCTION__);
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_11, 0);
DBRUN(bxe_dump_fw(sc));
} else
DBPRINT(sc, BXE_FATAL,
"%s(): Unknown hardware assertion "
"(attn = 0x%08X)!\n", __FUNCTION__, attn);
}
/* Look for any hardware latched attentions. */
if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
DBPRINT(sc, BXE_FATAL,
"%s(): Latched attention 0x%08X (masked)!\n", __FUNCTION__,
attn);
/* Check if a GRC register access timeout occurred. */
if (attn & BXE_GRC_TIMEOUT) {
val = CHIP_IS_E1H(sc) ? REG_RD(sc,
MISC_REG_GRC_TIMEOUT_ATTN) : 0;
DBPRINT(sc, BXE_WARN,
"%s(): GRC timeout for register 0x%08X!\n",
__FUNCTION__, val);
}
/* Check if a GRC reserved register was accessed. */
if (attn & BXE_GRC_RSV) {
val = CHIP_IS_E1H(sc) ? REG_RD(sc,
MISC_REG_GRC_RSV_ATTN) : 0;
DBPRINT(sc, BXE_WARN,
"%s(): GRC register 0x%08X is reserved!\n",
__FUNCTION__, val);
}
REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
}
DBEXIT(BXE_VERBOSE_INTR);
}
/*
* Handle any attentions that have been newly deasserted.
*
* Returns:
* None
*/
static void
bxe_attn_int_deasserted(struct bxe_softc *sc, uint32_t deasserted)
{
struct attn_route attn;
struct attn_route group_mask;
uint32_t val, reg_addr, aeu_mask;
int index, port;
DBENTER(BXE_VERBOSE_INTR);
/*
* Need to take HW lock because MCP or other port might also try
* to handle this event.
*/
bxe_acquire_alr(sc);
port = BP_PORT(sc);
/* Get the current attention signal bits. */
attn.sig[0] = REG_RD(sc,
MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
attn.sig[1] = REG_RD(sc,
MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
attn.sig[2] = REG_RD(sc,
MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
attn.sig[3] = REG_RD(sc,
MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
DBPRINT(sc, BXE_EXTREME_INTR,
"%s(): attention = 0x%08X 0x%08X 0x%08X 0x%08X\n", __FUNCTION__,
attn.sig[0], attn.sig[1], attn.sig[2], attn.sig[3]);
/*
* Compare the current attention bits to each attention group
* to see if anyone has registered this attention.
*/
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
if (deasserted & (1 << index)) {
group_mask = sc->attn_group[index];
DBPRINT(sc, BXE_EXTREME_INTR,
"%s(): group[%02d] = 0x%08X 0x%08X 0x%08x 0X%08x\n",
__FUNCTION__, index, group_mask.sig[0],
group_mask.sig[1], group_mask.sig[2],
group_mask.sig[3]);
/* Handle any registered attentions. */
bxe_attn_int_deasserted3(sc,
attn.sig[3] & group_mask.sig[3]);
bxe_attn_int_deasserted1(sc,
attn.sig[1] & group_mask.sig[1]);
bxe_attn_int_deasserted2(sc,
attn.sig[2] & group_mask.sig[2]);
bxe_attn_int_deasserted0(sc,
attn.sig[0] & group_mask.sig[0]);
if ((attn.sig[0] & group_mask.sig[0] &
HW_PRTY_ASSERT_SET_0) ||
(attn.sig[1] & group_mask.sig[1] &
HW_PRTY_ASSERT_SET_1) ||
(attn.sig[2] & group_mask.sig[2] &
HW_PRTY_ASSERT_SET_2))
BXE_PRINTF("%s(%d): FATAL hardware block "
"parity attention!\n", __FILE__, __LINE__);
}
}
bxe_release_alr(sc);
reg_addr = (HC_REG_COMMAND_REG +
port * 32 + COMMAND_REG_ATTN_BITS_CLR);
val = ~deasserted;
DBPRINT(sc, BXE_EXTREME_INTR,
"%s(): About to mask 0x%08X at HC addr 0x%08X\n", __FUNCTION__,
deasserted, reg_addr);
REG_WR(sc, reg_addr, val);
if (~sc->attn_state & deasserted)
DBPRINT(sc, BXE_FATAL, "%s(): IGU Bug!\n", __FUNCTION__);
reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
MISC_REG_AEU_MASK_ATTN_FUNC_0;
bxe_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
aeu_mask = REG_RD(sc, reg_addr);
DBPRINT(sc, BXE_EXTREME_INTR,
"%s(): Current aeu_mask = 0x%08X, newly deasserted = 0x%08X\n",
__FUNCTION__, aeu_mask, deasserted);
aeu_mask |= (deasserted & 0xff);
DBPRINT(sc, BXE_EXTREME_INTR, "%s(): New aeu_mask = 0x%08X\n",
__FUNCTION__, aeu_mask);
REG_WR(sc, reg_addr, aeu_mask);
bxe_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
DBPRINT(sc, BXE_EXTREME_INTR, "%s(): Current attn_state = 0x%08X\n",
__FUNCTION__, sc->attn_state);
sc->attn_state &= ~deasserted;
DBPRINT(sc, BXE_EXTREME_INTR, "%s(): New attn_state = 0x%08X\n",
__FUNCTION__, sc->attn_state);
DBEXIT(BXE_VERBOSE_INTR);
}
/*
* Handle interrupts caused by internal attentions (everything else other
* than RX, TX, and link state changes).
*
* Returns:
* None
*/
static void
bxe_attn_int(struct bxe_softc* sc)
{
uint32_t attn_ack, attn_bits, attn_state;
uint32_t asserted, deasserted;
DBENTER(BXE_VERBOSE_INTR);
attn_bits = le32toh(sc->def_sb->atten_status_block.attn_bits);
attn_ack =
le32toh(sc->def_sb->atten_status_block.attn_bits_ack);
attn_state = sc->attn_state;
asserted = attn_bits & ~attn_ack & ~attn_state;
deasserted = ~attn_bits & attn_ack & attn_state;
/* Make sure we're in a sane state. */
if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state))
BXE_PRINTF("%s(%d): Bad attention state!\n",
__FILE__, __LINE__);
/* Handle any attentions that are newly asserted. */
if (asserted) {
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): attn_state = 0x%08X, attn_bits = 0x%08X, "
"attn_ack = 0x%08X, asserted = 0x%08X\n", __FUNCTION__,
attn_state, attn_bits, attn_ack, asserted);
bxe_attn_int_asserted(sc, asserted);
}
/* Handle any attentions that are newly deasserted. */
if (deasserted) {
DBPRINT(sc, BXE_VERBOSE_INTR,
"%s(): attn_state = 0x%08X, attn_bits = 0x%08X, "
"attn_ack = 0x%08X, deasserted = 0x%08X\n", __FUNCTION__,
attn_state, attn_bits, attn_ack, deasserted);
bxe_attn_int_deasserted(sc, deasserted);
}
DBEXIT(BXE_VERBOSE_INTR);
}
/* sum[hi:lo] += add[hi:lo] */
#define ADD_64(s_hi, a_hi, s_lo, a_lo) do { \
s_lo += a_lo; \
s_hi += a_hi + ((s_lo < a_lo) ? 1 : 0); \
} while (0)
/* Subtraction = minuend -= subtrahend */
#define SUB_64(m_hi, s_hi, m_lo, s_lo) \
do { \
DIFF_64(m_hi, m_hi, s_hi, m_lo, m_lo, s_lo); \
} while (0)
/* difference = minuend - subtrahend */
#define DIFF_64(d_hi, m_hi, s_hi, d_lo, m_lo, s_lo) do { \
if (m_lo < s_lo) { \
/* underflow */ \
d_hi = m_hi - s_hi; \
if (d_hi > 0) { \
/* we can 'loan' 1 */ \
d_hi--; \
d_lo = m_lo + (UINT_MAX - s_lo) + 1; \
} else { \
/* m_hi <= s_hi */ \
d_hi = 0; \
d_lo = 0; \
} \
} else { \
/* m_lo >= s_lo */ \
if (m_hi < s_hi) { \
d_hi = 0; \
d_lo = 0; \
} else { \
/* m_hi >= s_hi */ \
d_hi = m_hi - s_hi; \
d_lo = m_lo - s_lo; \
} \
} \
} while (0)
#define UPDATE_STAT64(s, t) do { \
DIFF_64(diff.hi, new->s##_hi, pstats->mac_stx[0].t##_hi,\
diff.lo, new->s##_lo, pstats->mac_stx[0].t##_lo); \
pstats->mac_stx[0].t##_hi = new->s##_hi; \
pstats->mac_stx[0].t##_lo = new->s##_lo; \
ADD_64(pstats->mac_stx[1].t##_hi, diff.hi, \
pstats->mac_stx[1].t##_lo, diff.lo); \
} while (0)
#define UPDATE_STAT64_NIG(s, t) do { \
DIFF_64(diff.hi, new->s##_hi, old->s##_hi, \
diff.lo, new->s##_lo, old->s##_lo); \
ADD_64(estats->t##_hi, diff.hi, \
estats->t##_lo, diff.lo); \
} while (0)
/* sum[hi:lo] += add */
#define ADD_EXTEND_64(s_hi, s_lo, a) do { \
s_lo += a; \
s_hi += (s_lo < a) ? 1 : 0; \
} while (0)
#define UPDATE_EXTEND_STAT(s) do { \
ADD_EXTEND_64(pstats->mac_stx[1].s##_hi, \
pstats->mac_stx[1].s##_lo, new->s); \
} while (0)
#define UPDATE_EXTEND_TSTAT(s, t) do { \
diff = (tclient->s) - (old_tclient->s); \
old_tclient->s = (tclient->s); \
ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \
} while (0)
#define UPDATE_EXTEND_XSTAT(s, t) do { \
diff = xclient->s - old_xclient->s; \
old_xclient->s = xclient->s; \
ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \
} while (0)
#define UPDATE_EXTEND_USTAT(s, t) do { \
diff = uclient->s - old_uclient->s; \
old_uclient->s = uclient->s; \
ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \
} while (0)
#define SUB_EXTEND_64(m_hi, m_lo, s)do { \
SUB_64(m_hi, 0, m_lo, s); \
} while (0)
#define SUB_EXTEND_USTAT(s, t)do { \
diff = (uclient->s) - (old_uclient->s); \
SUB_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \
} while (0)
#ifdef __i386__
#define BITS_PER_LONG 32
#else
#define BITS_PER_LONG 64
#endif
static __inline long
bxe_hilo(uint32_t *hiref)
{
uint32_t lo;
lo = *(hiref + 1);
#if (BITS_PER_LONG == 64)
uint32_t hi = *hiref;
return (HILO_U64(hi, lo));
#else
return (lo);
#endif
}
/*
* Request the STORM statistics by posting a slowpath ramrod.
*
* Returns:
* None.
*/
static void
bxe_stats_storm_post(struct bxe_softc *sc)
{
struct eth_query_ramrod_data ramrod_data = {0};
int i, rc;
DBENTER(BXE_INSANE_STATS);
if (!sc->stats_pending) {
ramrod_data.drv_counter = sc->stats_counter++;
ramrod_data.collect_port = sc->port.pmf ? 1 : 0;
for (i = 0; i < sc->num_queues; i++)
ramrod_data.ctr_id_vector |= (1 << sc->fp[i].cl_id);
rc = bxe_sp_post(sc, RAMROD_CMD_ID_ETH_STAT_QUERY, 0,
((uint32_t *)&ramrod_data)[1],
((uint32_t *)&ramrod_data)[0], 0);
if (rc == 0) {
/* Stats ramrod has it's own slot on the SPQ. */
sc->spq_left++;
sc->stats_pending = 1;
}
}
DBEXIT(BXE_INSANE_STATS);
}
/*
* Setup the adrress used by the driver to report port-based statistics
* back to the controller.
*
* Returns:
* None.
*/
static void
bxe_stats_port_base_init(struct bxe_softc *sc)
{
uint32_t *stats_comp;
struct dmae_command *dmae;
DBENTER(BXE_VERBOSE_STATS);
/* Only the port management function (PMF) does this work. */
if ((sc->port.pmf == 0) || !sc->port.port_stx) {
BXE_PRINTF("%s(%d): Invalid statistcs port setup!\n",
__FILE__, __LINE__);
goto bxe_stats_port_base_init_exit;
}
stats_comp = BXE_SP(sc, stats_comp);
sc->executer_idx = 0;
/* DMA the address of the drivers port statistics block. */
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(BP_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(BP_E1HVN(sc) << DMAE_CMD_E1HVN_SHIFT));
dmae->src_addr_lo = U64_LO(BXE_SP_MAPPING(sc, port_stats));
dmae->src_addr_hi = U64_HI(BXE_SP_MAPPING(sc, port_stats));
dmae->dst_addr_lo = sc->port.port_stx >> 2;
dmae->dst_addr_hi = 0;
dmae->len = sizeof(struct host_port_stats) >> 2;
dmae->comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_val = DMAE_COMP_VAL;
*stats_comp = 0;
bxe_stats_hw_post(sc);
bxe_stats_comp(sc);
bxe_stats_port_base_init_exit:
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Setup the adrress used by the driver to report function-based statistics
* back to the controller.
*
* Returns:
* None.
*/
static void
bxe_stats_func_base_init(struct bxe_softc *sc)
{
int port, func;
int vn, vn_max;
uint32_t func_stx;
DBENTER(BXE_VERBOSE_STATS);
/* Only the port management function (PMF) does this work. */
if ((sc->port.pmf == 0) || !sc->func_stx) {
BXE_PRINTF("%s(%d): Invalid statistcs function setup!\n",
__FILE__, __LINE__);
goto bxe_stats_func_base_init_exit;
}
port = BP_PORT(sc);
func_stx = sc->func_stx;
vn_max = IS_E1HMF(sc) ? E1HVN_MAX : E1VN_MAX;
/* Initialize each function individually. */
for (vn = VN_0; vn < vn_max; vn++) {
func = 2 * vn + port;
sc->func_stx = SHMEM_RD(sc, func_mb[func].fw_mb_param);
bxe_stats_func_init(sc);
bxe_stats_hw_post(sc);
bxe_stats_comp(sc);
}
sc->func_stx = func_stx;
bxe_stats_func_base_init_exit:
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* DMA the function-based statistics to the controller.
*
* Returns:
* None.
*/
static void
bxe_stats_func_base_update(struct bxe_softc *sc)
{
uint32_t *stats_comp;
struct dmae_command *dmae;
DBENTER(BXE_VERBOSE_STATS);
/* Only the port management function (PMF) does this work. */
if ((sc->port.pmf == 0) || !sc->func_stx) {
BXE_PRINTF("%s(%d): Invalid statistcs function update!\n",
__FILE__, __LINE__);
goto bxe_stats_func_base_update_exit;
}
dmae = &sc->stats_dmae;
stats_comp = BXE_SP(sc, stats_comp);
sc->executer_idx = 0;
memset(dmae, 0, sizeof(struct dmae_command));
/* DMA the function statistics from the driver to the H/W. */
dmae->opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(BP_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(BP_E1HVN(sc) << DMAE_CMD_E1HVN_SHIFT));
dmae->src_addr_lo = sc->func_stx >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, func_stats_base));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, func_stats_base));
dmae->len = sizeof(struct host_func_stats) >> 2;
dmae->comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_val = DMAE_COMP_VAL;
*stats_comp = 0;
bxe_stats_hw_post(sc);
bxe_stats_comp(sc);
bxe_stats_func_base_update_exit:
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Initialize statistics.
*
* Returns:
* Nothing.
*/
static void
bxe_stats_init(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int func, i, port;
DBENTER(BXE_VERBOSE_STATS);
if (sc->stats_enable == FALSE)
goto bxe_stats_init_exit;
port = BP_PORT(sc);
func = BP_FUNC(sc);
sc->executer_idx = 0;
sc->stats_counter = 0;
sc->stats_pending = 0;
/* Fetch the offset of port & function statistics in shared memory. */
if (NOMCP(sc)){
sc->port.port_stx = 0;
sc->func_stx = 0;
} else{
sc->port.port_stx = SHMEM_RD(sc, port_mb[port].port_stx);
sc->func_stx = SHMEM_RD(sc, func_mb[func].fw_mb_param);
}
DBPRINT(sc, BXE_VERBOSE_STATS, "%s(): sc->port.port_stx = 0x%08X\n",
__FUNCTION__, sc->port.port_stx);
DBPRINT(sc, BXE_VERBOSE_STATS, "%s(): sc->func_stx = 0x%08X\n",
__FUNCTION__, sc->func_stx);
/* Port statistics. */
memset(&(sc->port.old_nig_stats), 0, sizeof(struct nig_stats));
sc->port.old_nig_stats.brb_discard = REG_RD(sc,
NIG_REG_STAT0_BRB_DISCARD + port * 0x38);
sc->port.old_nig_stats.brb_truncate = REG_RD(sc,
NIG_REG_STAT0_BRB_TRUNCATE + port * 0x38);
REG_RD_DMAE(sc, NIG_REG_STAT0_EGRESS_MAC_PKT0 + port * 0x50,
&(sc->port.old_nig_stats.egress_mac_pkt0_lo), 2);
REG_RD_DMAE(sc, NIG_REG_STAT0_EGRESS_MAC_PKT1 + port * 0x50,
&(sc->port.old_nig_stats.egress_mac_pkt1_lo), 2);
/* Function statistics. */
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
/* Clear all per-queue statistics. */
memset(&fp->old_tclient, 0,
sizeof(struct tstorm_per_client_stats));
memset(&fp->old_uclient, 0,
sizeof(struct ustorm_per_client_stats));
memset(&fp->old_xclient, 0,
sizeof(struct xstorm_per_client_stats));
memset(&fp->eth_q_stats, 0,
sizeof(struct bxe_q_stats));
}
/* ToDo: Clear any driver specific statistics? */
sc->stats_state = STATS_STATE_DISABLED;
if (sc->port.pmf == 1) {
/* Init port & function stats if we're PMF. */
if (sc->port.port_stx)
bxe_stats_port_base_init(sc);
if (sc->func_stx)
bxe_stats_func_base_init(sc);
} else if (sc->func_stx)
/* Update function stats if we're not PMF. */
bxe_stats_func_base_update(sc);
bxe_stats_init_exit:
DBEXIT(BXE_VERBOSE_STATS);
}
/*
*
* Returns:
* None.
*/
static void
bxe_stats_hw_post(struct bxe_softc *sc)
{
struct dmae_command *dmae;
uint32_t *stats_comp;
int loader_idx;
DBENTER(BXE_INSANE_STATS);
dmae = &sc->stats_dmae;
stats_comp = BXE_SP(sc, stats_comp);
*stats_comp = DMAE_COMP_VAL;
if (sc->executer_idx) {
loader_idx = PMF_DMAE_C(sc);
memset(dmae, 0, sizeof(struct dmae_command));
dmae->opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
DMAE_CMD_C_DST_GRC | DMAE_CMD_C_ENABLE |
DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(BP_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(BP_E1HVN(sc) << DMAE_CMD_E1HVN_SHIFT));
dmae->src_addr_lo = U64_LO(BXE_SP_MAPPING(sc, dmae[0]));
dmae->src_addr_hi = U64_HI(BXE_SP_MAPPING(sc, dmae[0]));
dmae->dst_addr_lo = (DMAE_REG_CMD_MEM +
sizeof(struct dmae_command) * (loader_idx + 1)) >> 2;
dmae->dst_addr_hi = 0;
dmae->len = sizeof(struct dmae_command) >> 2;
if (CHIP_IS_E1(sc))
dmae->len--;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx + 1] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
*stats_comp = 0;
bxe_post_dmae(sc, dmae, loader_idx);
} else if (sc->func_stx) {
*stats_comp = 0;
bxe_post_dmae(sc, dmae, INIT_DMAE_C(sc));
}
DBEXIT(BXE_INSANE_STATS);
}
/*
* Delay routine which polls for the DMA engine to complete.
*
* Returns:
* 0 = Failure, !0 = Success
*/
static int
bxe_stats_comp(struct bxe_softc *sc)
{
uint32_t *stats_comp;
int cnt;
DBENTER(BXE_VERBOSE_STATS);
stats_comp = BXE_SP(sc, stats_comp);
cnt = 10;
while (*stats_comp != DMAE_COMP_VAL) {
if (!cnt) {
BXE_PRINTF("%s(%d): Timeout waiting for statistics "
"completions.\n", __FILE__, __LINE__);
break;
}
cnt--;
DELAY(1000);
}
DBEXIT(BXE_VERBOSE_STATS);
/* ToDo: Shouldn't this return the value of cnt? */
return (1);
}
/*
* DMA port statistcs from controller to driver.
*
* Returns:
* None.
*/
static void
bxe_stats_pmf_update(struct bxe_softc *sc)
{
struct dmae_command *dmae;
uint32_t opcode, *stats_comp;
int loader_idx;
DBENTER(BXE_VERBOSE_STATS);
stats_comp = BXE_SP(sc, stats_comp);
loader_idx = PMF_DMAE_C(sc);
/* We shouldn't be here if any of the following are false. */
if (!IS_E1HMF(sc) || (sc->port.pmf == 0) || !sc->port.port_stx) {
BXE_PRINTF("%s(%d): Statistics bug!\n", __FILE__, __LINE__);
goto bxe_stats_pmf_update_exit;
}
sc->executer_idx = 0;
/* Instruct DMA engine to copy port statistics from H/W to driver. */
opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(BP_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(BP_E1HVN(sc) << DMAE_CMD_E1HVN_SHIFT));
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = (opcode | DMAE_CMD_C_DST_GRC);
dmae->src_addr_lo = sc->port.port_stx >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, port_stats));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, port_stats));
dmae->len = DMAE_LEN32_RD_MAX;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = (opcode | DMAE_CMD_C_DST_PCI);
dmae->src_addr_lo = (sc->port.port_stx >> 2) + DMAE_LEN32_RD_MAX;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, port_stats) +
DMAE_LEN32_RD_MAX * 4);
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, port_stats) +
DMAE_LEN32_RD_MAX * 4);
dmae->len = (sizeof(struct host_port_stats) >> 2) -
DMAE_LEN32_RD_MAX;
dmae->comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_val = DMAE_COMP_VAL;
/* Start the DMA and wait for the result. */
*stats_comp = 0;
bxe_stats_hw_post(sc);
bxe_stats_comp(sc);
bxe_stats_pmf_update_exit:
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Prepare the DMAE parameters required for all statistics.
*
* This function should only be called by the driver instance
* that is designated as the port management function (PMF).
*
* Returns:
* None.
*/
static void
bxe_stats_port_init(struct bxe_softc *sc)
{
struct dmae_command *dmae;
uint32_t mac_addr, opcode, *stats_comp;
int loader_idx, port, vn;
DBENTER(BXE_VERBOSE_STATS);
port = BP_PORT(sc);
vn = BP_E1HVN(sc);
loader_idx = PMF_DMAE_C(sc);
stats_comp = BXE_SP(sc, stats_comp);
/* Only the port management function (PMF) does this work. */
if (!sc->link_vars.link_up || (sc->port.pmf == 0)) {
BXE_PRINTF("%s(%d): Invalid statistics port setup!\n",
__FILE__, __LINE__);
goto bxe_stats_port_init_exit;
}
sc->executer_idx = 0;
/* The same opcde is used for multiple DMA operations. */
opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
DMAE_CMD_C_DST_GRC | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(vn << DMAE_CMD_E1HVN_SHIFT));
/* Setup the DMA for port statistics. */
if (sc->port.port_stx) {
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = U64_LO(BXE_SP_MAPPING(sc, port_stats));
dmae->src_addr_hi = U64_HI(BXE_SP_MAPPING(sc, port_stats));
dmae->dst_addr_lo = sc->port.port_stx >> 2;
dmae->dst_addr_hi = 0;
dmae->len = sizeof(struct host_port_stats) >> 2;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
}
/* Setup the DMA for function statistics. */
if (sc->func_stx) {
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = U64_LO(BXE_SP_MAPPING(sc, func_stats));
dmae->src_addr_hi = U64_HI(BXE_SP_MAPPING(sc, func_stats));
dmae->dst_addr_lo = sc->func_stx >> 2;
dmae->dst_addr_hi = 0;
dmae->len = sizeof(struct host_func_stats) >> 2;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
}
/* Setup statistics reporting for the MAC. */
opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
DMAE_CMD_C_DST_GRC | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(vn << DMAE_CMD_E1HVN_SHIFT));
if (sc->link_vars.mac_type == MAC_TYPE_BMAC) {
/* Enable statistics for the 10Gb BMAC. */
mac_addr = (port ? NIG_REG_INGRESS_BMAC1_MEM :
NIG_REG_INGRESS_BMAC0_MEM);
/* Setup BMAC TX statistics (TX_STAT_GTPKT .. TX_STAT_GTBYT). */
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = (mac_addr +
BIGMAC_REGISTER_TX_STAT_GTPKT) >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, mac_stats));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, mac_stats));
dmae->len = (8 + BIGMAC_REGISTER_TX_STAT_GTBYT -
BIGMAC_REGISTER_TX_STAT_GTPKT) >> 2;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
/* Setup BMAC RX statistcs (RX_STAT_GR64 .. RX_STAT_GRIPJ). */
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = (mac_addr +
BIGMAC_REGISTER_RX_STAT_GR64) >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, mac_stats) +
offsetof(struct bmac_stats, rx_stat_gr64_lo));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, mac_stats) +
offsetof(struct bmac_stats, rx_stat_gr64_lo));
dmae->len = (8 + BIGMAC_REGISTER_RX_STAT_GRIPJ -
BIGMAC_REGISTER_RX_STAT_GR64) >> 2;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
} else if (sc->link_vars.mac_type == MAC_TYPE_EMAC) {
/* Enable statistics for the 1Gb EMAC. */
mac_addr = (port ? GRCBASE_EMAC1 : GRCBASE_EMAC0);
/* Setup EMAC RX statistics. */
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = (mac_addr + EMAC_REG_EMAC_RX_STAT_AC) >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, mac_stats));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, mac_stats));
dmae->len = EMAC_REG_EMAC_RX_STAT_AC_COUNT;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
/* Setup additional EMAC RX statistics. */
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = (mac_addr +
EMAC_REG_EMAC_RX_STAT_AC_28) >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, mac_stats) +
offsetof(struct emac_stats, rx_stat_falsecarriererrors));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, mac_stats) +
offsetof(struct emac_stats, rx_stat_falsecarriererrors));
dmae->len = 1;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
/* Setup EMAC TX statistics. */
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = (mac_addr + EMAC_REG_EMAC_TX_STAT_AC) >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, mac_stats) +
offsetof(struct emac_stats, tx_stat_ifhcoutoctets));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, mac_stats) +
offsetof(struct emac_stats, tx_stat_ifhcoutoctets));
dmae->len = EMAC_REG_EMAC_TX_STAT_AC_COUNT;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
} else {
DBPRINT(sc, BXE_WARN, "%s(): Undefined MAC type.\n",
__FUNCTION__);
}
/* Enable NIG statistics. */
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = (port ? NIG_REG_STAT1_BRB_DISCARD :
NIG_REG_STAT0_BRB_DISCARD) >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, nig_stats));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, nig_stats));
dmae->len = (sizeof(struct nig_stats) - 4 * sizeof(uint32_t)) >> 2;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = opcode;
dmae->src_addr_lo = (port ? NIG_REG_STAT1_EGRESS_MAC_PKT0 :
NIG_REG_STAT0_EGRESS_MAC_PKT0) >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, nig_stats) +
offsetof(struct nig_stats, egress_mac_pkt0_lo));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, nig_stats) +
offsetof(struct nig_stats, egress_mac_pkt0_lo));
dmae->len = (2 * sizeof(uint32_t)) >> 2;
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(port ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(vn << DMAE_CMD_E1HVN_SHIFT));
dmae->src_addr_lo = (port ? NIG_REG_STAT1_EGRESS_MAC_PKT1 :
NIG_REG_STAT0_EGRESS_MAC_PKT1) >> 2;
dmae->src_addr_hi = 0;
dmae->dst_addr_lo = U64_LO(BXE_SP_MAPPING(sc, nig_stats) +
offsetof(struct nig_stats, egress_mac_pkt1_lo));
dmae->dst_addr_hi = U64_HI(BXE_SP_MAPPING(sc, nig_stats) +
offsetof(struct nig_stats, egress_mac_pkt1_lo));
dmae->len = (2 * sizeof(uint32_t)) >> 2;
dmae->comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_val = DMAE_COMP_VAL;
/* Clear the statistics completion value. */
*stats_comp = 0;
bxe_stats_port_init_exit:
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Prepare the DMAE parameters required for function statistics.
*
* This function is called by all driver instances.
*
* Returns:
* None.
*/
static void
bxe_stats_func_init(struct bxe_softc *sc)
{
struct dmae_command *dmae;
uint32_t *stats_comp;
DBENTER(BXE_VERBOSE_STATS);
if (!sc->func_stx) {
BXE_PRINTF("%s(%d): Invalid statistics function setup!\n",
__FILE__, __LINE__);
goto bxe_stats_func_init_exit;
}
dmae = &sc->stats_dmae;
stats_comp = BXE_SP(sc, stats_comp);
sc->executer_idx = 0;
memset(dmae, 0, sizeof(struct dmae_command));
/* Setup the DMA for function statistics. */
dmae->opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(BP_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(BP_E1HVN(sc) << DMAE_CMD_E1HVN_SHIFT));
dmae->src_addr_lo = U64_LO(BXE_SP_MAPPING(sc, func_stats));
dmae->src_addr_hi = U64_HI(BXE_SP_MAPPING(sc, func_stats));
dmae->dst_addr_lo = sc->func_stx >> 2;
dmae->dst_addr_hi = 0;
dmae->len = sizeof(struct host_func_stats) >> 2;
dmae->comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_val = DMAE_COMP_VAL;
*stats_comp = 0;
bxe_stats_func_init_exit:
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Starts a statistics update DMA and waits for completion.
*
* Returns:
* None.
*/
static void
bxe_stats_start(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_STATS);
if (sc->port.pmf == 1)
bxe_stats_port_init(sc);
else if (sc->func_stx)
bxe_stats_func_init(sc);
bxe_stats_hw_post(sc);
bxe_stats_storm_post(sc);
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Returns:
* None.
*/
static void
bxe_stats_pmf_start(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_STATS);
bxe_stats_comp(sc);
bxe_stats_pmf_update(sc);
bxe_stats_start(sc);
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Returns:
* None.
*/
static void
bxe_stats_restart(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_STATS);
bxe_stats_comp(sc);
bxe_stats_start(sc);
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Update the Big MAC (10Gb BMAC) statistics.
*
* Returns:
* None.
*/
static void
bxe_stats_bmac_update(struct bxe_softc *sc)
{
struct bmac_stats *new;
struct host_port_stats *pstats;
struct bxe_port_stats *estats;
struct regpair diff;
DBENTER(BXE_INSANE_STATS);
new = BXE_SP(sc, mac_stats.bmac_stats);
pstats = BXE_SP(sc, port_stats);
estats = &sc->eth_stats;
UPDATE_STAT64(rx_stat_grerb,
rx_stat_ifhcinbadoctets);
UPDATE_STAT64(rx_stat_grfcs,
rx_stat_dot3statsfcserrors);
UPDATE_STAT64(rx_stat_grund,
rx_stat_etherstatsundersizepkts);
UPDATE_STAT64(rx_stat_grovr,
rx_stat_dot3statsframestoolong);
UPDATE_STAT64(rx_stat_grfrg,
rx_stat_etherstatsfragments);
UPDATE_STAT64(rx_stat_grjbr,
rx_stat_etherstatsjabbers);
UPDATE_STAT64(rx_stat_grxcf,
rx_stat_maccontrolframesreceived);
UPDATE_STAT64(rx_stat_grxpf,
rx_stat_xoffstateentered);
UPDATE_STAT64(rx_stat_grxpf,
rx_stat_bmac_xpf);
UPDATE_STAT64(tx_stat_gtxpf,
tx_stat_outxoffsent);
UPDATE_STAT64(tx_stat_gtxpf,
tx_stat_flowcontroldone);
UPDATE_STAT64(tx_stat_gt64,
tx_stat_etherstatspkts64octets);
UPDATE_STAT64(tx_stat_gt127,
tx_stat_etherstatspkts65octetsto127octets);
UPDATE_STAT64(tx_stat_gt255,
tx_stat_etherstatspkts128octetsto255octets);
UPDATE_STAT64(tx_stat_gt511,
tx_stat_etherstatspkts256octetsto511octets);
UPDATE_STAT64(tx_stat_gt1023,
tx_stat_etherstatspkts512octetsto1023octets);
UPDATE_STAT64(tx_stat_gt1518,
tx_stat_etherstatspkts1024octetsto1522octets);
UPDATE_STAT64(tx_stat_gt2047,
tx_stat_bmac_2047);
UPDATE_STAT64(tx_stat_gt4095,
tx_stat_bmac_4095);
UPDATE_STAT64(tx_stat_gt9216,
tx_stat_bmac_9216);
UPDATE_STAT64(tx_stat_gt16383,
tx_stat_bmac_16383);
UPDATE_STAT64(tx_stat_gterr,
tx_stat_dot3statsinternalmactransmiterrors);
UPDATE_STAT64(tx_stat_gtufl,
tx_stat_bmac_ufl);
estats->pause_frames_received_hi =
pstats->mac_stx[1].rx_stat_bmac_xpf_hi;
estats->pause_frames_received_lo =
pstats->mac_stx[1].rx_stat_bmac_xpf_lo;
estats->pause_frames_sent_hi =
pstats->mac_stx[1].tx_stat_outxoffsent_hi;
estats->pause_frames_sent_lo =
pstats->mac_stx[1].tx_stat_outxoffsent_lo;
DBEXIT(BXE_INSANE_STATS);
}
/*
* Update the Ethernet MAC (1Gb EMAC) statistics.
*
* Returns:
* None.
*/
static void
bxe_stats_emac_update(struct bxe_softc *sc)
{
struct emac_stats *new;
struct host_port_stats *pstats;
struct bxe_port_stats *estats;
DBENTER(BXE_INSANE_STATS);
new = BXE_SP(sc, mac_stats.emac_stats);
pstats = BXE_SP(sc, port_stats);
estats = &sc->eth_stats;
UPDATE_EXTEND_STAT(rx_stat_ifhcinbadoctets);
UPDATE_EXTEND_STAT(tx_stat_ifhcoutbadoctets);
UPDATE_EXTEND_STAT(rx_stat_dot3statsfcserrors);
UPDATE_EXTEND_STAT(rx_stat_dot3statsalignmenterrors);
UPDATE_EXTEND_STAT(rx_stat_dot3statscarriersenseerrors);
UPDATE_EXTEND_STAT(rx_stat_falsecarriererrors);
UPDATE_EXTEND_STAT(rx_stat_etherstatsundersizepkts);
UPDATE_EXTEND_STAT(rx_stat_dot3statsframestoolong);
UPDATE_EXTEND_STAT(rx_stat_etherstatsfragments);
UPDATE_EXTEND_STAT(rx_stat_etherstatsjabbers);
UPDATE_EXTEND_STAT(rx_stat_maccontrolframesreceived);
UPDATE_EXTEND_STAT(rx_stat_xoffstateentered);
UPDATE_EXTEND_STAT(rx_stat_xonpauseframesreceived);
UPDATE_EXTEND_STAT(rx_stat_xoffpauseframesreceived);
UPDATE_EXTEND_STAT(tx_stat_outxonsent);
UPDATE_EXTEND_STAT(tx_stat_outxoffsent);
UPDATE_EXTEND_STAT(tx_stat_flowcontroldone);
UPDATE_EXTEND_STAT(tx_stat_etherstatscollisions);
UPDATE_EXTEND_STAT(tx_stat_dot3statssinglecollisionframes);
UPDATE_EXTEND_STAT(tx_stat_dot3statsmultiplecollisionframes);
UPDATE_EXTEND_STAT(tx_stat_dot3statsdeferredtransmissions);
UPDATE_EXTEND_STAT(tx_stat_dot3statsexcessivecollisions);
UPDATE_EXTEND_STAT(tx_stat_dot3statslatecollisions);
UPDATE_EXTEND_STAT(tx_stat_etherstatspkts64octets);
UPDATE_EXTEND_STAT(tx_stat_etherstatspkts65octetsto127octets);
UPDATE_EXTEND_STAT(tx_stat_etherstatspkts128octetsto255octets);
UPDATE_EXTEND_STAT(tx_stat_etherstatspkts256octetsto511octets);
UPDATE_EXTEND_STAT(tx_stat_etherstatspkts512octetsto1023octets);
UPDATE_EXTEND_STAT(tx_stat_etherstatspkts1024octetsto1522octets);
UPDATE_EXTEND_STAT(tx_stat_etherstatspktsover1522octets);
UPDATE_EXTEND_STAT(tx_stat_dot3statsinternalmactransmiterrors);
estats->pause_frames_received_hi =
pstats->mac_stx[1].rx_stat_xonpauseframesreceived_hi;
estats->pause_frames_received_lo =
pstats->mac_stx[1].rx_stat_xonpauseframesreceived_lo;
ADD_64(estats->pause_frames_received_hi,
pstats->mac_stx[1].rx_stat_xoffpauseframesreceived_hi,
estats->pause_frames_received_lo,
pstats->mac_stx[1].rx_stat_xoffpauseframesreceived_lo);
estats->pause_frames_sent_hi =
pstats->mac_stx[1].tx_stat_outxonsent_hi;
estats->pause_frames_sent_lo =
pstats->mac_stx[1].tx_stat_outxonsent_lo;
ADD_64(estats->pause_frames_sent_hi,
pstats->mac_stx[1].tx_stat_outxoffsent_hi,
estats->pause_frames_sent_lo,
pstats->mac_stx[1].tx_stat_outxoffsent_lo);
DBEXIT(BXE_INSANE_STATS);
}
/*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_stats_hw_update(struct bxe_softc *sc)
{
struct nig_stats *new, *old;
struct host_port_stats *pstats;
struct bxe_port_stats *estats;
struct regpair diff;
uint32_t nig_timer_max;
int rc;
DBENTER(BXE_INSANE_STATS);
rc = 0;
new = BXE_SP(sc, nig_stats);
old = &(sc->port.old_nig_stats);
pstats = BXE_SP(sc, port_stats);
estats = &sc->eth_stats;
/* Update statistics for the active MAC. */
if (sc->link_vars.mac_type == MAC_TYPE_BMAC)
bxe_stats_bmac_update(sc);
else if (sc->link_vars.mac_type == MAC_TYPE_EMAC)
bxe_stats_emac_update(sc);
else {
DBPRINT(sc, BXE_WARN,
"%s(): Statistics updated by DMAE but no MAC is active!\n",
__FUNCTION__);
rc = EINVAL;
goto bxe_stats_hw_update_exit;
}
/* Now update the hardware (NIG) statistics. */
ADD_EXTEND_64(pstats->brb_drop_hi, pstats->brb_drop_lo,
new->brb_discard - old->brb_discard);
ADD_EXTEND_64(estats->brb_truncate_hi, estats->brb_truncate_lo,
new->brb_truncate - old->brb_truncate);
UPDATE_STAT64_NIG(egress_mac_pkt0,
etherstatspkts1024octetsto1522octets);
UPDATE_STAT64_NIG(egress_mac_pkt1, etherstatspktsover1522octets);
memcpy(old, new, sizeof(struct nig_stats));
memcpy(&(estats->rx_stat_ifhcinbadoctets_hi), &(pstats->mac_stx[1]),
sizeof(struct mac_stx));
estats->brb_drop_hi = pstats->brb_drop_hi;
estats->brb_drop_lo = pstats->brb_drop_lo;
pstats->host_port_stats_start = ++pstats->host_port_stats_end;
if (!NOMCP(sc)) {
nig_timer_max =
SHMEM_RD(sc, port_mb[BP_PORT(sc)].stat_nig_timer);
if (nig_timer_max != estats->nig_timer_max) {
estats->nig_timer_max = nig_timer_max;
DBPRINT(sc, BXE_WARN,
"%s(): NIG timer reached max value (%u)!\n",
__FUNCTION__, estats->nig_timer_max);
}
}
bxe_stats_hw_update_exit:
DBEXIT(BXE_INSANE_STATS);
return (rc);
}
/*
* Returns:
* 0 = Success, !0 = Failure.
*/
// DRC - Done
static int
bxe_stats_storm_update(struct bxe_softc *sc)
{
int rc, i, cl_id;
struct eth_stats_query *stats;
struct bxe_port_stats *estats;
struct host_func_stats *fstats;
struct bxe_q_stats *qstats;
struct tstorm_per_port_stats *tport;
struct tstorm_per_client_stats *tclient;
struct ustorm_per_client_stats *uclient;
struct xstorm_per_client_stats *xclient;
struct tstorm_per_client_stats *old_tclient;
struct ustorm_per_client_stats *old_uclient;
struct xstorm_per_client_stats *old_xclient;
struct bxe_fastpath * fp;
uint32_t diff;
DBENTER(BXE_INSANE_STATS);
rc = 0;
diff = 0;
stats = BXE_SP(sc, fw_stats);
tport = &stats->tstorm_common.port_statistics;
fstats = BXE_SP(sc, func_stats);
memcpy(&(fstats->total_bytes_received_hi),
&(BXE_SP(sc, func_stats_base)->total_bytes_received_hi),
sizeof(struct host_func_stats) - 2 * sizeof(uint32_t));
estats = &sc->eth_stats;
estats->no_buff_discard_hi = 0;
estats->no_buff_discard_lo = 0;
estats->error_bytes_received_hi = 0;
estats->error_bytes_received_lo = 0;
estats->etherstatsoverrsizepkts_hi = 0;
estats->etherstatsoverrsizepkts_lo = 0;
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
cl_id = fp->cl_id;
tclient = &stats->tstorm_common.client_statistics[cl_id];
old_tclient = &fp->old_tclient;
uclient = &stats->ustorm_common.client_statistics[cl_id];
old_uclient = &fp->old_uclient;
xclient = &stats->xstorm_common.client_statistics[cl_id];
old_xclient = &fp->old_xclient;
qstats = &fp->eth_q_stats;
/* Are TSTORM statistics valid? */
if ((uint16_t)(le16toh(tclient->stats_counter) + 1) !=
sc->stats_counter) {
DBPRINT(sc, BXE_WARN, "%s(): Stats not updated by TSTORM "
"(tstorm counter (%d) != stats_counter (%d))!\n",
__FUNCTION__, tclient->stats_counter, sc->stats_counter);
rc = 1;
goto bxe_stats_storm_update_exit;
}
/* Are USTORM statistics valid? */
if ((uint16_t)(le16toh(uclient->stats_counter) + 1) !=
sc->stats_counter) {
DBPRINT(sc, BXE_WARN, "%s(): Stats not updated by USTORM "
"(ustorm counter (%d) != stats_counter (%d))!\n",
__FUNCTION__, uclient->stats_counter, sc->stats_counter);
rc = 2;
goto bxe_stats_storm_update_exit;
}
/* Are XSTORM statistics valid? */
if ((uint16_t)(le16toh(xclient->stats_counter) + 1) !=
sc->stats_counter) {
DBPRINT(sc, BXE_WARN, "%s(): Stats not updated by XSTORM "
"(xstorm counter (%d) != stats_counter (%d))!\n",
__FUNCTION__, xclient->stats_counter, sc->stats_counter);
rc = 3;
goto bxe_stats_storm_update_exit;
}
qstats->total_bytes_received_hi =
(tclient->rcv_broadcast_bytes.hi);
qstats->total_bytes_received_lo =
le32toh(tclient->rcv_broadcast_bytes.lo);
ADD_64(qstats->total_bytes_received_hi,
le32toh(tclient->rcv_multicast_bytes.hi),
qstats->total_bytes_received_lo,
le32toh(tclient->rcv_multicast_bytes.lo));
ADD_64(qstats->total_bytes_received_hi,
le32toh(tclient->rcv_unicast_bytes.hi),
qstats->total_bytes_received_lo,
le32toh(tclient->rcv_unicast_bytes.lo));
SUB_64(qstats->total_bytes_received_hi,
le32toh(uclient->bcast_no_buff_bytes.hi),
qstats->total_bytes_received_lo,
le32toh(uclient->bcast_no_buff_bytes.lo));
SUB_64(qstats->total_bytes_received_hi,
le32toh(uclient->mcast_no_buff_bytes.hi),
qstats->total_bytes_received_lo,
le32toh(uclient->mcast_no_buff_bytes.lo));
SUB_64(qstats->total_bytes_received_hi,
le32toh(uclient->ucast_no_buff_bytes.hi),
qstats->total_bytes_received_lo,
le32toh(uclient->ucast_no_buff_bytes.lo));
qstats->valid_bytes_received_hi =
qstats->total_bytes_received_hi;
qstats->valid_bytes_received_lo =
qstats->total_bytes_received_lo;
qstats->error_bytes_received_hi =
le32toh(tclient->rcv_error_bytes.hi);
qstats->error_bytes_received_lo =
le32toh(tclient->rcv_error_bytes.lo);
ADD_64(qstats->total_bytes_received_hi,
qstats->error_bytes_received_hi,
qstats->total_bytes_received_lo,
qstats->error_bytes_received_lo);
UPDATE_EXTEND_TSTAT(rcv_unicast_pkts,
total_unicast_packets_received);
UPDATE_EXTEND_TSTAT(rcv_multicast_pkts,
total_multicast_packets_received);
UPDATE_EXTEND_TSTAT(rcv_broadcast_pkts,
total_broadcast_packets_received);
UPDATE_EXTEND_TSTAT(packets_too_big_discard,
etherstatsoverrsizepkts);
UPDATE_EXTEND_TSTAT(no_buff_discard, no_buff_discard);
SUB_EXTEND_USTAT(ucast_no_buff_pkts,
total_unicast_packets_received);
SUB_EXTEND_USTAT(mcast_no_buff_pkts,
total_multicast_packets_received);
SUB_EXTEND_USTAT(bcast_no_buff_pkts,
total_broadcast_packets_received);
UPDATE_EXTEND_USTAT(ucast_no_buff_pkts, no_buff_discard);
UPDATE_EXTEND_USTAT(mcast_no_buff_pkts, no_buff_discard);
UPDATE_EXTEND_USTAT(bcast_no_buff_pkts, no_buff_discard);
qstats->total_bytes_transmitted_hi =
le32toh(xclient->unicast_bytes_sent.hi);
qstats->total_bytes_transmitted_lo =
le32toh(xclient->unicast_bytes_sent.lo);
ADD_64(qstats->total_bytes_transmitted_hi,
le32toh(xclient->multicast_bytes_sent.hi),
qstats->total_bytes_transmitted_lo,
le32toh(xclient->multicast_bytes_sent.lo));
ADD_64(qstats->total_bytes_transmitted_hi,
le32toh(xclient->broadcast_bytes_sent.hi),
qstats->total_bytes_transmitted_lo,
le32toh(xclient->broadcast_bytes_sent.lo));
UPDATE_EXTEND_XSTAT(unicast_pkts_sent,
total_unicast_packets_transmitted);
UPDATE_EXTEND_XSTAT(multicast_pkts_sent,
total_multicast_packets_transmitted);
UPDATE_EXTEND_XSTAT(broadcast_pkts_sent,
total_broadcast_packets_transmitted);
old_tclient->checksum_discard = tclient->checksum_discard;
old_tclient->ttl0_discard = tclient->ttl0_discard;
ADD_64(fstats->total_bytes_received_hi,
qstats->total_bytes_received_hi,
fstats->total_bytes_received_lo,
qstats->total_bytes_received_lo);
ADD_64(fstats->total_bytes_transmitted_hi,
qstats->total_bytes_transmitted_hi,
fstats->total_bytes_transmitted_lo,
qstats->total_bytes_transmitted_lo);
ADD_64(fstats->total_unicast_packets_received_hi,
qstats->total_unicast_packets_received_hi,
fstats->total_unicast_packets_received_lo,
qstats->total_unicast_packets_received_lo);
ADD_64(fstats->total_multicast_packets_received_hi,
qstats->total_multicast_packets_received_hi,
fstats->total_multicast_packets_received_lo,
qstats->total_multicast_packets_received_lo);
ADD_64(fstats->total_broadcast_packets_received_hi,
qstats->total_broadcast_packets_received_hi,
fstats->total_broadcast_packets_received_lo,
qstats->total_broadcast_packets_received_lo);
ADD_64(fstats->total_unicast_packets_transmitted_hi,
qstats->total_unicast_packets_transmitted_hi,
fstats->total_unicast_packets_transmitted_lo,
qstats->total_unicast_packets_transmitted_lo);
ADD_64(fstats->total_multicast_packets_transmitted_hi,
qstats->total_multicast_packets_transmitted_hi,
fstats->total_multicast_packets_transmitted_lo,
qstats->total_multicast_packets_transmitted_lo);
ADD_64(fstats->total_broadcast_packets_transmitted_hi,
qstats->total_broadcast_packets_transmitted_hi,
fstats->total_broadcast_packets_transmitted_lo,
qstats->total_broadcast_packets_transmitted_lo);
ADD_64(fstats->valid_bytes_received_hi,
qstats->valid_bytes_received_hi,
fstats->valid_bytes_received_lo,
qstats->valid_bytes_received_lo);
ADD_64(estats->error_bytes_received_hi,
qstats->error_bytes_received_hi,
estats->error_bytes_received_lo,
qstats->error_bytes_received_lo);
ADD_64(estats->etherstatsoverrsizepkts_hi,
qstats->etherstatsoverrsizepkts_hi,
estats->etherstatsoverrsizepkts_lo,
qstats->etherstatsoverrsizepkts_lo);
ADD_64(estats->no_buff_discard_hi,
qstats->no_buff_discard_hi,
estats->no_buff_discard_lo,
qstats->no_buff_discard_lo);
}
ADD_64(fstats->total_bytes_received_hi,
estats->rx_stat_ifhcinbadoctets_hi,
fstats->total_bytes_received_lo,
estats->rx_stat_ifhcinbadoctets_lo);
memcpy(estats, &(fstats->total_bytes_received_hi),
sizeof(struct host_func_stats) - 2 * sizeof(uint32_t));
ADD_64(estats->etherstatsoverrsizepkts_hi,
estats->rx_stat_dot3statsframestoolong_hi,
estats->etherstatsoverrsizepkts_lo,
estats->rx_stat_dot3statsframestoolong_lo);
ADD_64(estats->error_bytes_received_hi,
estats->rx_stat_ifhcinbadoctets_hi,
estats->error_bytes_received_lo,
estats->rx_stat_ifhcinbadoctets_lo);
if (sc->port.pmf) {
estats->mac_filter_discard =
le32toh(tport->mac_filter_discard);
estats->xxoverflow_discard =
le32toh(tport->xxoverflow_discard);
estats->brb_truncate_discard =
le32toh(tport->brb_truncate_discard);
estats->mac_discard = le32toh(tport->mac_discard);
}
fstats->host_func_stats_start = ++fstats->host_func_stats_end;
sc->stats_pending = 0;
bxe_stats_storm_update_exit:
DBEXIT(BXE_INSANE_STATS);
return (rc);
}
/*
* Copy the controller maintained statistics over to the OS.
*
* Returns:
* None.
*/
static void
bxe_stats_net_update(struct bxe_softc *sc)
{
struct tstorm_per_client_stats *old_tclient;
struct bxe_port_stats *estats;
struct ifnet *ifp;
DBENTER(BXE_INSANE_STATS);
old_tclient = &sc->fp[0].old_tclient;
estats = &sc->eth_stats;
ifp = sc->bxe_ifp;
/*
* Update the OS interface statistics from
* the hardware statistics.
*/
ifp->if_collisions =
(u_long) estats->tx_stat_dot3statssinglecollisionframes_lo +
(u_long) estats->tx_stat_dot3statsmultiplecollisionframes_lo +
(u_long) estats->tx_stat_dot3statslatecollisions_lo +
(u_long) estats->tx_stat_dot3statsexcessivecollisions_lo;
ifp->if_ierrors =
(u_long) old_tclient->checksum_discard +
(u_long) estats->no_buff_discard_lo +
(u_long) estats->mac_discard +
(u_long) estats->rx_stat_etherstatsundersizepkts_lo +
(u_long) estats->brb_drop_lo +
(u_long) estats->brb_truncate_discard +
(u_long) estats->rx_stat_dot3statsfcserrors_lo +
(u_long) estats->rx_stat_dot3statsalignmenterrors_lo +
(u_long) estats->xxoverflow_discard;
ifp->if_oerrors =
(u_long) estats->tx_stat_dot3statslatecollisions_lo +
(u_long) estats->tx_stat_dot3statsexcessivecollisions_lo +
(u_long) estats->tx_stat_dot3statsinternalmactransmiterrors_lo;
ifp->if_ipackets =
bxe_hilo(&estats->total_unicast_packets_received_hi) +
bxe_hilo(&estats->total_multicast_packets_received_hi) +
bxe_hilo(&estats->total_broadcast_packets_received_hi);
ifp->if_opackets =
bxe_hilo(&estats->total_unicast_packets_transmitted_hi) +
bxe_hilo(&estats->total_multicast_packets_transmitted_hi) +
bxe_hilo(&estats->total_broadcast_packets_transmitted_hi);
DBEXIT(BXE_INSANE_STATS);
}
/*
*
* Returns:
* None.
*/
static void
bxe_stats_update(struct bxe_softc *sc)
{
uint32_t *stats_comp;
int update;
DBENTER(BXE_INSANE_STATS);
stats_comp = BXE_SP(sc, stats_comp);
update = 0;
/* Make sure the statistics DMAE update has completed. */
if (*stats_comp != DMAE_COMP_VAL)
goto bxe_stats_update_exit;
/* Check for any hardware statistics updates. */
if (sc->port.pmf == 1)
update = (bxe_stats_hw_update(sc) == 0);
/* Check for any STORM statistics updates. */
update |= (bxe_stats_storm_update(sc) == 0);
/* If we got updated hardware statistics then update the OS. */
if (update)
bxe_stats_net_update(sc);
else {
/* Check if any statistics updates are pending. */
if (sc->stats_pending) {
/* The update hasn't completed, keep waiting. */
sc->stats_pending++;
/* Have we been waiting for too long? */
if (sc->stats_pending >= 3) {
BXE_PRINTF(
"%s(%d): Failed to get statistics after "
"3 tries!\n", __FILE__, __LINE__);
bxe_panic_dump(sc);
goto bxe_stats_update_exit;
}
}
}
/* Kickoff the next statistics request. */
bxe_stats_hw_post(sc);
bxe_stats_storm_post(sc);
bxe_stats_update_exit:
DBEXIT(BXE_INSANE_STATS);
}
/*
*
* Returns:
* None.
*/
static void
bxe_stats_port_stop(struct bxe_softc *sc)
{
struct dmae_command *dmae;
uint32_t opcode, *stats_comp;
int loader_idx;
DBENTER(BXE_VERBOSE_STATS);
stats_comp = BXE_SP(sc, stats_comp);
loader_idx = PMF_DMAE_C(sc);
sc->executer_idx = 0;
opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
DMAE_CMD_C_ENABLE |
DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
(BP_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
(BP_E1HVN(sc) << DMAE_CMD_E1HVN_SHIFT));
if (sc->port.port_stx) {
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
if (sc->func_stx)
dmae->opcode = (opcode | DMAE_CMD_C_DST_GRC);
else
dmae->opcode = (opcode | DMAE_CMD_C_DST_PCI);
dmae->src_addr_lo = U64_LO(BXE_SP_MAPPING(sc, port_stats));
dmae->src_addr_hi = U64_HI(BXE_SP_MAPPING(sc, port_stats));
dmae->dst_addr_lo = sc->port.port_stx >> 2;
dmae->dst_addr_hi = 0;
dmae->len = sizeof(struct host_port_stats) >> 2;
if (sc->func_stx) {
dmae->comp_addr_lo = dmae_reg_go_c[loader_idx] >> 2;
dmae->comp_addr_hi = 0;
dmae->comp_val = 1;
} else {
dmae->comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc,
stats_comp));
dmae->comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc,
stats_comp));
dmae->comp_val = DMAE_COMP_VAL;
*stats_comp = 0;
}
}
if (sc->func_stx) {
dmae = BXE_SP(sc, dmae[sc->executer_idx++]);
dmae->opcode = (opcode | DMAE_CMD_C_DST_PCI);
dmae->src_addr_lo = U64_LO(BXE_SP_MAPPING(sc, func_stats));
dmae->src_addr_hi = U64_HI(BXE_SP_MAPPING(sc, func_stats));
dmae->dst_addr_lo = sc->func_stx >> 2;
dmae->dst_addr_hi = 0;
dmae->len = sizeof(struct host_func_stats) >> 2;
dmae->comp_addr_lo = U64_LO(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_addr_hi = U64_HI(BXE_SP_MAPPING(sc, stats_comp));
dmae->comp_val = DMAE_COMP_VAL;
*stats_comp = 0;
}
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* Returns:
* None.
*/
static void
bxe_stats_stop(struct bxe_softc *sc)
{
int update;
DBENTER(BXE_VERBOSE_STATS);
update = 0;
/* Wait for any pending completions. */
bxe_stats_comp(sc);
if (sc->port.pmf == 1)
update = (bxe_stats_hw_update(sc) == 0);
update |= (bxe_stats_storm_update(sc) == 0);
if (update) {
bxe_stats_net_update(sc);
if (sc->port.pmf == 1)
bxe_stats_port_stop(sc);
bxe_stats_hw_post(sc);
bxe_stats_comp(sc);
}
DBEXIT(BXE_VERBOSE_STATS);
}
/*
* A dummy function to fill in the statistics state transition table.
*
* Returns:
* None.
*/
static void
bxe_stats_do_nothing(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_STATS);
DBEXIT(BXE_VERBOSE_STATS);
}
static const struct {
void (*action)(struct bxe_softc *sc);
enum bxe_stats_state next_state;
} bxe_stats_stm[STATS_STATE_MAX][STATS_EVENT_MAX] = {
/* State Event */
{
/* DISABLED PMF */ {bxe_stats_pmf_update, STATS_STATE_DISABLED},
/* LINK_UP */ {bxe_stats_start, STATS_STATE_ENABLED},
/* UPDATE */ {bxe_stats_do_nothing, STATS_STATE_DISABLED},
/* STOP */ {bxe_stats_do_nothing, STATS_STATE_DISABLED}
},
{
/* ENABLED PMF */ {bxe_stats_pmf_start, STATS_STATE_ENABLED},
/* LINK_UP */ {bxe_stats_restart, STATS_STATE_ENABLED},
/* UPDATE */ {bxe_stats_update, STATS_STATE_ENABLED},
/* STOP */ {bxe_stats_stop, STATS_STATE_DISABLED}
}
};
/*
* Move to the next state of the statistics state machine.
*
* Returns:
* None.
*/
static void
bxe_stats_handle(struct bxe_softc *sc, enum bxe_stats_event event)
{
enum bxe_stats_state state;
DBENTER(BXE_EXTREME_STATS);
state = sc->stats_state;
#ifdef BXE_DEBUG
if (event != STATS_EVENT_UPDATE)
DBPRINT(sc, BXE_VERBOSE_STATS,
"%s(): Current state = %d, event = %d.\n", __FUNCTION__,
state, event);
#endif
bxe_stats_stm[state][event].action(sc);
sc->stats_state = bxe_stats_stm[state][event].next_state;
#ifdef BXE_DEBUG
if (event != STATS_EVENT_UPDATE)
DBPRINT(sc, BXE_VERBOSE_STATS, "%s(): New state = %d.\n",
__FUNCTION__, sc->stats_state);
#endif
DBEXIT(BXE_EXTREME_STATS);
}
/*
* bxe_chktso_window()
* Checks to ensure the 13 bd sliding window is >= MSS for TSO.
* Check that (13 total bds - 3bds) = 10 bd window >= MSS.
* The window: 3 bds are = 1 (for headers BD) + 2 (for PBD and last BD)
* The headers comes in a seperate bd in FreeBSD. So 13-3=10.
*
* Returns:
* 0 if OK to send, 1 if packet needs further defragmentation.
*/
static int
bxe_chktso_window(struct bxe_softc* sc, int nsegs, bus_dma_segment_t *segs,
struct mbuf *m0)
{
uint32_t num_wnds, wnd_size, wnd_sum;
int32_t frag_idx, wnd_idx;
unsigned short lso_mss;
int defrag;
defrag = 0;
wnd_sum = 0;
wnd_size = 10;
num_wnds = nsegs - wnd_size;
lso_mss = htole16(m0->m_pkthdr.tso_segsz);
/*
* Total Header lengths Eth+IP+TCP in 1st FreeBSD mbuf so
* calculate the first window sum of data skip the first
* assuming it is the header in FreeBSD.
*/
for (frag_idx = 1; (frag_idx <= wnd_size); frag_idx++)
wnd_sum += htole16(segs[frag_idx].ds_len);
/* Chk the first 10 bd window size */
if (wnd_sum < lso_mss)
return (defrag = 1);
/* Run through the windows */
for (wnd_idx = 0; wnd_idx < num_wnds; wnd_idx++, frag_idx++) {
/* Subtract the 1st mbuf->m_len of the last wndw(-header). */
wnd_sum -= htole16(segs[wnd_idx+1].ds_len);
/* Add the next mbuf len to the len of our new window. */
wnd_sum += htole16(segs[frag_idx].ds_len);
if (wnd_sum < lso_mss) {
defrag = 1;
break;
}
}
return (defrag);
}
/*
* Encapsultes an mbuf cluster into the tx_bd chain structure and
* makes the memory visible to the controller.
*
* If an mbuf is submitted to this routine and cannot be given to the
* controller (e.g. it has too many fragments) then the function may free
* the mbuf and return to the caller.
*
* Returns:
* 0 = Success, !0 = Failure
* Note the side effect that an mbuf may be freed if it causes a problem.
*/
static int
bxe_tx_encap(struct bxe_fastpath *fp, struct mbuf **m_head)
{
bus_dma_segment_t segs[32];
bus_dmamap_t map;
struct mbuf *m0;
struct eth_tx_parse_bd *tx_parse_bd;
struct eth_tx_bd *tx_data_bd;
struct eth_tx_bd *tx_total_pkt_size_bd;
struct eth_tx_start_bd *tx_start_bd;
uint16_t etype, sw_tx_bd_prod, sw_pkt_prod, total_pkt_size;
// uint16_t bd_index, pkt_index;
uint8_t mac_type;
int i, defragged, e_hlen, error, nsegs, rc, nbds, vlan_off, ovlan;
struct bxe_softc *sc;
sc = fp->sc;
DBENTER(BXE_VERBOSE_SEND);
DBRUN(M_ASSERTPKTHDR(*m_head));
m0 = *m_head;
rc = defragged = nbds = ovlan = vlan_off = total_pkt_size = 0;
tx_start_bd = NULL;
tx_data_bd = NULL;
tx_parse_bd = NULL;
tx_total_pkt_size_bd = NULL;
/* Get the H/W pointer (0 to 65535) for packets and BD's. */
sw_pkt_prod = fp->tx_pkt_prod;
sw_tx_bd_prod = fp->tx_bd_prod;
/* Create the S/W index (0 to MAX_TX_BD) for packets and BD's. */
// pkt_index = TX_BD(sw_pkt_prod);
// bd_index = TX_BD(sw_tx_bd_prod);
mac_type = UNICAST_ADDRESS;
/* Map the mbuf into the next open DMAable memory. */
map = fp->tx_mbuf_map[TX_BD(sw_pkt_prod)];
error = bus_dmamap_load_mbuf_sg(fp->tx_mbuf_tag, map, m0,
segs, &nsegs, BUS_DMA_NOWAIT);
/* Handle any mapping errors. */
if(__predict_false(error != 0)){
fp->tx_dma_mapping_failure++;
if (error == ENOMEM) {
/* Resource issue, try again later. */
rc = ENOMEM;
} else if (error == EFBIG) {
/* Possibly recoverable with defragmentation. */
fp->mbuf_defrag_attempts++;
m0 = m_defrag(*m_head, M_DONTWAIT);
if (m0 == NULL) {
fp->mbuf_defrag_failures++;
rc = ENOBUFS;
} else {
/* Defrag successful, try mapping again.*/
*m_head = m0;
error = bus_dmamap_load_mbuf_sg(
fp->tx_mbuf_tag, map, m0,
segs, &nsegs, BUS_DMA_NOWAIT);
if (error) {
fp->tx_dma_mapping_failure++;
rc = error;
}
}
} else {
/* Unknown, unrecoverable mapping error. */
DBPRINT(sc, BXE_WARN_SEND,
"%s(): Unknown TX mapping error! "
"rc = %d.\n", __FUNCTION__, error);
DBRUN(bxe_dump_mbuf(sc, m0));
rc = error;
}
goto bxe_tx_encap_continue;
}
/* Make sure there's enough room in the send queue. */
if (__predict_false((nsegs + 2) >
(USABLE_TX_BD - fp->tx_bd_used))) {
/* Recoverable, try again later. */
fp->tx_hw_queue_full++;
bus_dmamap_unload(fp->tx_mbuf_tag, map);
rc = ENOMEM;
goto bxe_tx_encap_continue;
}
/* Capture the current H/W TX chain high watermark. */
if (__predict_false(fp->tx_hw_max_queue_depth <
fp->tx_bd_used))
fp->tx_hw_max_queue_depth = fp->tx_bd_used;
/* Now make sure it fits in the packet window. */
if (__predict_false(nsegs > 12)) {
/*
* The mbuf may be to big for the controller
* to handle. If the frame is a TSO frame
* we'll need to do an additional check.
*/
if(m0->m_pkthdr.csum_flags & CSUM_TSO){
if (bxe_chktso_window(sc,nsegs,segs,m0) == 0)
/* OK to send. */
goto bxe_tx_encap_continue;
else
fp->tx_window_violation_tso++;
} else
fp->tx_window_violation_std++;
/* No sense trying to defrag again, we'll drop the frame. */
if (defragged > 0)
rc = ENODEV;
}
bxe_tx_encap_continue:
/* Check for errors */
if (rc){
if(rc == ENOMEM){
/* Recoverable try again later */
}else{
fp->tx_soft_errors++;
fp->tx_mbuf_alloc--;
m_freem(*m_head);
*m_head = NULL;
}
goto bxe_tx_encap_exit;
}
/* Save the mbuf and mapping. */
fp->tx_mbuf_ptr[TX_BD(sw_pkt_prod)] = m0;
fp->tx_mbuf_map[TX_BD(sw_pkt_prod)] = map;
/* Set flag according to packet type (UNICAST_ADDRESS is default). */
if (m0->m_flags & M_BCAST)
mac_type = BROADCAST_ADDRESS;
else if (m0->m_flags & M_MCAST)
mac_type = MULTICAST_ADDRESS;
/* Prepare the first transmit (Start) BD for the mbuf. */
tx_start_bd = &fp->tx_chain[TX_BD(sw_tx_bd_prod)].start_bd;
tx_start_bd->addr_lo = htole32(U64_LO(segs[0].ds_addr));
tx_start_bd->addr_hi = htole32(U64_HI(segs[0].ds_addr));
tx_start_bd->nbytes = htole16(segs[0].ds_len);
total_pkt_size += tx_start_bd->nbytes;
tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
tx_start_bd->general_data =
(mac_type << ETH_TX_START_BD_ETH_ADDR_TYPE_SHIFT);
tx_start_bd->general_data |= (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
/* All frames have at least Start BD + Parsing BD. */
nbds = nsegs + 1;
tx_start_bd->nbd = htole16(nbds);
if (m0->m_flags & M_VLANTAG) {
tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_VLAN_TAG;
tx_start_bd->vlan = htole16(m0->m_pkthdr.ether_vtag);
} else
/*
* In cases where the VLAN tag is not used the firmware
* expects to see a packet counter in the VLAN tag field
* Failure to do so will cause an assertion which will
* stop the controller.
*/
tx_start_bd->vlan = htole16(fp->tx_pkt_prod);
/*
* Add a parsing BD from the chain. The parsing BD is always added,
* however, it is only used for TSO & chksum.
*/
sw_tx_bd_prod = NEXT_TX_BD(sw_tx_bd_prod);
tx_parse_bd = (struct eth_tx_parse_bd *)
&fp->tx_chain[TX_BD(sw_tx_bd_prod)].parse_bd;
memset(tx_parse_bd, 0, sizeof(struct eth_tx_parse_bd));
/* Gather all info about the packet and add to tx_parse_bd */
if (m0->m_pkthdr.csum_flags) {
struct ether_vlan_header *eh;
struct ip *ip = NULL;
struct tcphdr *th = NULL;
uint16_t flags = 0;
struct udphdr *uh = NULL;
/* Map Ethernet header to find type & header length. */
eh = mtod(m0, struct ether_vlan_header *);
/* Handle VLAN encapsulation if present. */
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
etype = ntohs(eh->evl_proto);
e_hlen = ETHER_HDR_LEN + vlan_off;
} else {
etype = ntohs(eh->evl_encap_proto);
e_hlen = ETHER_HDR_LEN;
}
/* Set the Ethernet header length in 16 bit words. */
tx_parse_bd->global_data = (e_hlen + ovlan) >> 1;
tx_parse_bd->global_data |= ((m0->m_flags & M_VLANTAG) <<
ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT);
switch (etype) {
case ETHERTYPE_IP:
/* If mbuf len < 20bytes, IP header is in next mbuf. */
if (m0->m_len < sizeof(struct ip))
ip = (struct ip *) m0->m_next->m_data;
else
ip = (struct ip *) (m0->m_data + e_hlen);
/* Calculate IP header length (16 bit words). */
tx_parse_bd->ip_hlen = (ip->ip_hl << 1);
/* Calculate enet + IP header length (16 bit words). */
tx_parse_bd->total_hlen = tx_parse_bd->ip_hlen +
(e_hlen >> 1);
if (m0->m_pkthdr.csum_flags & CSUM_IP) {
fp->tx_offload_frames_csum_ip++;
flags |= ETH_TX_BD_FLAGS_IP_CSUM;
}
/* Handle any checksums requested by the stack. */
if ((m0->m_pkthdr.csum_flags & CSUM_TCP)||
(m0->m_pkthdr.csum_flags & CSUM_TSO)){
/* Get the TCP header. */
th = (struct tcphdr *)((caddr_t)ip +
(ip->ip_hl << 2));
/* Add the TCP checksum offload flag. */
flags |= ETH_TX_BD_FLAGS_L4_CSUM;
fp->tx_offload_frames_csum_tcp++;
/* Update the enet + IP + TCP header length. */
tx_parse_bd->total_hlen +=
(uint16_t)(th->th_off << 1);
/* Get the pseudo header checksum. */
tx_parse_bd->tcp_pseudo_csum =
ntohs(th->th_sum);
} else if (m0->m_pkthdr.csum_flags & CSUM_UDP) {
/*
* The hardware doesn't actually support UDP
* checksum offload but we can fake it by
* doing TCP checksum offload and factoring
* out the extra bytes that are different
* between the TCP header and the UDP header.
*
* Calculation will begin 10 bytes before the
* actual start of the UDP header. To work
* around this we need to calculate the
* checksum of the 10 bytes before the UDP
* header and factor that out of the UDP
* pseudo header checksum before asking the
* H/W to calculate the full UDP checksum.
*/
uint16_t tmp_csum;
uint32_t *tmp_uh;
/* This value is 10. */
uint8_t fix = (uint8_t) (offsetof(struct tcphdr, th_sum) -
(int) offsetof(struct udphdr, uh_sum));
/*
* Add the TCP checksum offload flag for
* UDP frames too.*
*/
flags |= ETH_TX_BD_FLAGS_L4_CSUM;
fp->tx_offload_frames_csum_udp++;
tx_parse_bd->global_data |=
ETH_TX_PARSE_BD_UDP_CS_FLG;
/* Get a pointer to the UDP header. */
uh = (struct udphdr *)((caddr_t)ip +
(ip->ip_hl << 2));
/* Set pointer 10 bytes before UDP header. */
tmp_uh = (uint32_t *)((uint8_t *)uh -
fix);
/*
* Calculate a pseudo header checksum over
* the 10 bytes before the UDP header.
*/
tmp_csum = in_pseudo(ntohl(*tmp_uh),
ntohl(*(tmp_uh + 1)),
ntohl((*(tmp_uh + 2)) & 0x0000FFFF));
/* Update the enet + IP + UDP header length. */
tx_parse_bd->total_hlen +=
(sizeof(struct udphdr) >> 1);
tx_parse_bd->tcp_pseudo_csum =
~in_addword(uh->uh_sum, ~tmp_csum);
}
/* Update the offload flags. */
tx_start_bd->bd_flags.as_bitfield |= flags;
break;
case ETHERTYPE_IPV6:
fp->tx_unsupported_tso_request_ipv6++;
/* ToDo: Add IPv6 support. */
break;
default:
fp->tx_unsupported_tso_request_not_tcp++;
/* ToDo - How to handle this error? */
}
/* Setup the Parsing BD with TSO specific info */
if (m0->m_pkthdr.csum_flags & CSUM_TSO) {
uint16_t hdr_len = tx_parse_bd->total_hlen << 1;
tx_start_bd->bd_flags.as_bitfield |=
ETH_TX_BD_FLAGS_SW_LSO;
fp->tx_offload_frames_tso++;
/* ToDo: Does this really help? */
if (__predict_false(tx_start_bd->nbytes > hdr_len)) {
fp->tx_header_splits++;
/*
* Split the first BD into 2 BDs to make the
* firmwares job easy...
*/
tx_start_bd->nbd++;
DBPRINT(sc, BXE_EXTREME_SEND,
"%s(): TSO split headr size is %d (%x:%x) nbds %d\n",
__FUNCTION__, tx_start_bd->nbytes,
tx_start_bd->addr_hi,
tx_start_bd->addr_lo, nbds);
sw_tx_bd_prod = NEXT_TX_BD(sw_tx_bd_prod);
/* New transmit BD (after the tx_parse_bd). */
tx_data_bd =
&fp->tx_chain[TX_BD(sw_tx_bd_prod)].reg_bd;
tx_data_bd->addr_hi =
htole32(U64_HI(segs[0].ds_addr + hdr_len));
tx_data_bd->addr_lo =
htole32(U64_LO(segs[0].ds_addr + hdr_len));
tx_data_bd->nbytes =
htole16(segs[0].ds_len) - hdr_len;
if (tx_total_pkt_size_bd == NULL)
tx_total_pkt_size_bd = tx_data_bd;
}
/*
* The controller needs the following info for TSO:
* MSS, tcp_send_seq, ip_id, and tcp_pseudo_csum.
*/
tx_parse_bd->lso_mss = htole16(m0->m_pkthdr.tso_segsz);
tx_parse_bd->tcp_send_seq = ntohl(th->th_seq);
tx_parse_bd->tcp_flags = th->th_flags;
tx_parse_bd->ip_id = ntohs(ip->ip_id);
tx_parse_bd->tcp_pseudo_csum =
ntohs(in_pseudo(ip->ip_src.s_addr,
ip->ip_dst.s_addr, htons(IPPROTO_TCP)));
tx_parse_bd->global_data |=
ETH_TX_PARSE_BD_PSEUDO_CS_WITHOUT_LEN;
}
}
/* Prepare remaining BDs. Start_tx_bd contains first seg (frag). */
for (i = 1; i < nsegs ; i++) {
sw_tx_bd_prod = NEXT_TX_BD(sw_tx_bd_prod);
tx_data_bd = &fp->tx_chain[TX_BD(sw_tx_bd_prod)].reg_bd;
tx_data_bd->addr_lo = htole32(U64_LO(segs[i].ds_addr));
tx_data_bd->addr_hi = htole32(U64_HI(segs[i].ds_addr));
tx_data_bd->nbytes = htole16(segs[i].ds_len);
if (tx_total_pkt_size_bd == NULL)
tx_total_pkt_size_bd = tx_data_bd;
total_pkt_size += tx_data_bd->nbytes;
}
if(tx_total_pkt_size_bd != NULL)
tx_total_pkt_size_bd->total_pkt_bytes = total_pkt_size;
/* Update TX BD producer index value for next TX */
sw_tx_bd_prod = NEXT_TX_BD(sw_tx_bd_prod);
/* Update the used TX BD counter. */
fp->tx_bd_used += nbds;
/*
* If the chain of tx_bd's describing this frame
* is adjacent to or spans an eth_tx_next_bd element
* then we need to increment the nbds value.
*/
if(TX_IDX(sw_tx_bd_prod) < nbds)
nbds++;
/* Don't allow reordering of writes for nbd and packets. */
mb();
fp->tx_db.data.prod += nbds;
/* Producer points to the next free tx_bd at this point. */
fp->tx_pkt_prod++;
fp->tx_bd_prod = sw_tx_bd_prod;
DOORBELL(sc, fp->index, fp->tx_db.raw);
fp->tx_pkts++;
/* Prevent speculative reads from getting ahead of the status block. */
bus_space_barrier(sc->bxe_btag, sc->bxe_bhandle,
0, 0, BUS_SPACE_BARRIER_READ);
/* Prevent speculative reads from getting ahead of the doorbell. */
bus_space_barrier(sc->bxe_db_btag, sc->bxe_db_bhandle,
0, 0, BUS_SPACE_BARRIER_READ);
bxe_tx_encap_exit:
DBEXIT(BXE_VERBOSE_SEND);
return (rc);
}
/*
* Legacy (non-RSS) dispatch routine.
*
* Returns:
* Nothing.
*/
static void
bxe_tx_start(struct ifnet *ifp)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
sc = ifp->if_softc;
DBENTER(BXE_EXTREME_SEND);
/* Exit if the transmit queue is full or link down. */
if (((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
IFF_DRV_RUNNING) || !sc->link_vars.link_up) {
DBPRINT(sc, BXE_WARN,
"%s(): No link or TX queue full, ignoring "
"transmit request.\n", __FUNCTION__);
goto bxe_tx_start_exit;
}
/* Set the TX queue for the frame. */
fp = &sc->fp[0];
BXE_FP_LOCK(fp);
bxe_tx_start_locked(ifp, fp);
BXE_FP_UNLOCK(fp);
bxe_tx_start_exit:
DBEXIT(BXE_EXTREME_SEND);
}
/*
* Legacy (non-RSS) transmit routine.
*
* Returns:
* Nothing.
*/
static void
bxe_tx_start_locked(struct ifnet *ifp, struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
struct mbuf *m = NULL;
int tx_count = 0;
sc = fp->sc;
DBENTER(BXE_EXTREME_SEND);
BXE_FP_LOCK_ASSERT(fp);
/* Keep adding entries while there are frames to send. */
while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
/* Check for any frames to send. */
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
if (__predict_false(m == NULL))
break;
/* The transmit mbuf now belongs to us, keep track of it. */
fp->tx_mbuf_alloc++;
/*
* Pack the data into the transmit ring. If we
* don't have room, place the mbuf back at the
* head of the TX queue, set the OACTIVE flag,
* and wait for the NIC to drain the chain.
*/
if (__predict_false(bxe_tx_encap(fp, &m))) {
fp->tx_encap_failures++;
/* Very Bad Frames(tm) may have been dropped. */
if (m != NULL) {
/*
* Mark the TX queue as full and return
* the frame.
*/
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
IFQ_DRV_PREPEND(&ifp->if_snd, m);
fp->tx_mbuf_alloc--;
fp->tx_queue_xoff++;
} else {
}
/* Stop looking for more work. */
break;
}
/* The transmit frame was enqueued successfully. */
tx_count++;
/* Send a copy of the frame to any BPF listeners. */
BPF_MTAP(ifp, m);
}
/* No TX packets were dequeued. */
if (tx_count > 0)
/* Reset the TX watchdog timeout timer. */
fp->watchdog_timer = BXE_TX_TIMEOUT;
DBEXIT(BXE_EXTREME_SEND);
}
#if __FreeBSD_version >= 800000
/*
* Multiqueue (RSS) dispatch routine.
*
* Returns:
* 0 if transmit succeeds, !0 otherwise.
*/
static int
bxe_tx_mq_start(struct ifnet *ifp, struct mbuf *m)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
int fp_index, rc;
sc = ifp->if_softc;
DBENTER(BXE_EXTREME_SEND);
fp_index = 0;
/* If using flow ID, assign the TX queue based on the flow ID. */
if ((m->m_flags & M_FLOWID) != 0)
fp_index = m->m_pkthdr.flowid % sc->num_queues;
/* Select the fastpath TX queue for the frame. */
fp = &sc->fp[fp_index];
/* Skip H/W enqueue if transmit queue is full or link down. */
if (((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
IFF_DRV_RUNNING) || !sc->link_vars.link_up) {
/* Stash the mbuf if we can. */
rc = drbr_enqueue(ifp, fp->br, m);
goto bxe_tx_mq_start_exit;
}
BXE_FP_LOCK(fp);
rc = bxe_tx_mq_start_locked(ifp, fp, m);
BXE_FP_UNLOCK(fp);
bxe_tx_mq_start_exit:
DBEXIT(BXE_EXTREME_SEND);
return (rc);
}
/*
* Multiqueue (TSS) transmit routine. This routine is responsible
* for adding a frame to the hardware's transmit queue.
*
* Returns:
* 0 if transmit succeeds, !0 otherwise.
*/
static int
bxe_tx_mq_start_locked(struct ifnet *ifp,
struct bxe_fastpath *fp, struct mbuf *m)
{
struct bxe_softc *sc;
struct mbuf *next;
int depth, rc, tx_count;
sc = fp->sc;
DBENTER(BXE_EXTREME_SEND);
rc = tx_count = 0;
/* Fetch the depth of the driver queue. */
depth = drbr_inuse(ifp, fp->br);
if (depth > fp->tx_max_drbr_queue_depth)
fp->tx_max_drbr_queue_depth = depth;
BXE_FP_LOCK_ASSERT(fp);
if (m == NULL) {
/* No new work, check for pending frames. */
next = drbr_dequeue(ifp, fp->br);
} else if (drbr_needs_enqueue(ifp, fp->br)) {
/* Both new and pending work, maintain packet order. */
rc = drbr_enqueue(ifp, fp->br, m);
if (rc != 0) {
fp->tx_soft_errors++;
goto bxe_tx_mq_start_locked_exit;
}
next = drbr_dequeue(ifp, fp->br);
} else
/* New work only, nothing pending. */
next = m;
/* Keep adding entries while there are frames to send. */
while (next != NULL) {
/* The transmit mbuf now belongs to us, keep track of it. */
fp->tx_mbuf_alloc++;
/*
* Pack the data into the transmit ring. If we
* don't have room, place the mbuf back at the
* head of the TX queue, set the OACTIVE flag,
* and wait for the NIC to drain the chain.
*/
rc = bxe_tx_encap(fp, &next);
if (__predict_false(rc != 0)) {
fp->tx_encap_failures++;
/* Very Bad Frames(tm) may have been dropped. */
if (next != NULL) {
/*
* Mark the TX queue as full and save
* the frame.
*/
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
fp->tx_frame_deferred++;
/* This may reorder frame. */
rc = drbr_enqueue(ifp, fp->br, next);
fp->tx_mbuf_alloc--;
}
/* Stop looking for more work. */
break;
}
/* The transmit frame was enqueued successfully. */
tx_count++;
/* Send a copy of the frame to any BPF listeners. */
BPF_MTAP(ifp, next);
/* Handle any completions if we're running low. */
if (fp->tx_bd_used >= BXE_TX_CLEANUP_THRESHOLD)
bxe_txeof(fp);
/* Close TX since there's so little room left. */
if (fp->tx_bd_used >= BXE_TX_CLEANUP_THRESHOLD) {
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
break;
}
next = drbr_dequeue(ifp, fp->br);
}
/* No TX packets were dequeued. */
if (tx_count > 0)
/* Reset the TX watchdog timeout timer. */
fp->watchdog_timer = BXE_TX_TIMEOUT;
bxe_tx_mq_start_locked_exit:
DBEXIT(BXE_EXTREME_SEND);
return (rc);
}
static void
bxe_mq_flush(struct ifnet *ifp)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
struct mbuf *m;
int i;
sc = ifp->if_softc;
DBENTER(BXE_VERBOSE_UNLOAD);
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
if (fp->br != NULL) {
DBPRINT(sc, BXE_VERBOSE_UNLOAD,
"%s(): Clearing fp[%02d]...\n",
__FUNCTION__, fp->index);
BXE_FP_LOCK(fp);
while ((m = buf_ring_dequeue_sc(fp->br)) != NULL)
m_freem(m);
BXE_FP_UNLOCK(fp);
}
}
if_qflush(ifp);
DBEXIT(BXE_VERBOSE_UNLOAD);
}
#endif /* FreeBSD_version >= 800000 */
/*
* Handles any IOCTL calls from the operating system.
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
{
struct bxe_softc *sc;
struct ifreq *ifr;
int error, mask, reinit;
sc = ifp->if_softc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_MISC);
ifr = (struct ifreq *)data;
error = 0;
reinit = 0;
switch (command) {
case SIOCSIFMTU:
/* Set the MTU. */
DBPRINT(sc, BXE_VERBOSE_MISC, "%s(): Received SIOCSIFMTU\n",
__FUNCTION__);
/* Check that the MTU setting is supported. */
if ((ifr->ifr_mtu < BXE_MIN_MTU) ||
(ifr->ifr_mtu > BXE_JUMBO_MTU)) {
error = EINVAL;
break;
}
BXE_CORE_LOCK(sc);
ifp->if_mtu = ifr->ifr_mtu;
BXE_CORE_UNLOCK(sc);
reinit = 1;
break;
case SIOCSIFFLAGS:
/* Toggle the interface state up or down. */
DBPRINT(sc, BXE_VERBOSE_MISC, "%s(): Received SIOCSIFFLAGS\n",
__FUNCTION__);
BXE_CORE_LOCK(sc);
/* Check if the interface is up. */
if (ifp->if_flags & IFF_UP) {
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
/* Set promiscuous/multicast flags. */
bxe_set_rx_mode(sc);
} else {
/* Start the HW */
bxe_init_locked(sc, LOAD_NORMAL);
}
} else {
/* Bring down the interface. */
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
bxe_stop_locked(sc, UNLOAD_NORMAL);
}
BXE_CORE_UNLOCK(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
/* Add/Delete multicast addresses. */
DBPRINT(sc, BXE_VERBOSE_MISC,
"%s(): Received SIOCADDMULTI/SIOCDELMULTI\n", __FUNCTION__);
BXE_CORE_LOCK(sc);
/* Check if the interface is up. */
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
/* Set receive mode flags. */
bxe_set_rx_mode(sc);
BXE_CORE_UNLOCK(sc);
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
/* Set/Get Interface media */
DBPRINT(sc, BXE_VERBOSE_MISC,
"%s(): Received SIOCSIFMEDIA/SIOCGIFMEDIA\n", __FUNCTION__);
error = ifmedia_ioctl(ifp, ifr, &sc->bxe_ifmedia, command);
break;
case SIOCSIFCAP:
/* Set interface capability */
/* Find out which capabilities have changed. */
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
DBPRINT(sc, BXE_VERBOSE_MISC,
"%s(): Received SIOCSIFCAP (mask = 0x%08X)\n", __FUNCTION__,
(uint32_t)mask);
BXE_CORE_LOCK(sc);
/* Toggle the LRO capabilites enable flag. */
if (mask & IFCAP_LRO) {
ifp->if_capenable ^= IFCAP_LRO;
sc->bxe_flags ^= BXE_TPA_ENABLE_FLAG;
DBPRINT(sc, BXE_INFO_MISC,
"%s(): Toggling LRO (bxe_flags = "
"0x%08X).\n", __FUNCTION__, sc->bxe_flags);
/* LRO requires different buffer setup. */
reinit = 1;
}
/* Toggle the TX checksum capabilites enable flag. */
if (mask & IFCAP_TXCSUM) {
DBPRINT(sc, BXE_VERBOSE_MISC,
"%s(): Toggling IFCAP_TXCSUM.\n", __FUNCTION__);
ifp->if_capenable ^= IFCAP_TXCSUM;
if (IFCAP_TXCSUM & ifp->if_capenable)
ifp->if_hwassist = BXE_IF_HWASSIST;
else
ifp->if_hwassist = 0;
}
/* Toggle the RX checksum capabilities enable flag. */
if (mask & IFCAP_RXCSUM) {
DBPRINT(sc, BXE_VERBOSE_MISC,
"%s(): Toggling IFCAP_RXCSUM.\n", __FUNCTION__);
ifp->if_capenable ^= IFCAP_RXCSUM;
if (IFCAP_RXCSUM & ifp->if_capenable)
ifp->if_hwassist = BXE_IF_HWASSIST;
else
ifp->if_hwassist = 0;
}
/* Toggle VLAN_MTU capabilities enable flag. */
if (mask & IFCAP_VLAN_MTU) {
/* ToDo: Is this really true? */
BXE_PRINTF("%s(%d): Changing VLAN_MTU not supported.\n",
__FILE__, __LINE__);
error = EINVAL;
}
/* Toggle VLANHWTAG capabilities enabled flag. */
if (mask & IFCAP_VLAN_HWTAGGING) {
/* ToDo: Is this really true? */
BXE_PRINTF(
"%s(%d): Changing VLAN_HWTAGGING not supported!\n",
__FILE__, __LINE__);
error = EINVAL;
}
/* Toggle TSO4 capabilities enabled flag. */
if (mask & IFCAP_TSO4) {
DBPRINT(sc, BXE_VERBOSE_MISC,
"%s(): Toggling IFCAP_TSO4.\n", __FUNCTION__);
ifp->if_capenable ^= IFCAP_TSO4;
}
/* Toggle TSO6 capabilities enabled flag. */
if (mask & IFCAP_TSO6) {
/* ToDo: Add TSO6 support. */
BXE_PRINTF(
"%s(%d): Changing TSO6 not supported!\n",
__FILE__, __LINE__);
}
BXE_CORE_UNLOCK(sc);
/*
* ToDo: Look into supporting:
* VLAN_HWFILTER
* VLAN_HWCSUM
* VLAN_HWTSO
* POLLING
* WOL[_UCAST|_MCAST|_MAGIC]
*
*/
break;
default:
/* We don't know how to handle the IOCTL, pass it on. */
error = ether_ioctl(ifp, command, data);
break;
}
/* Restart the controller with the new capabilities. */
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) && (reinit != 0)) {
BXE_CORE_LOCK(sc);
bxe_stop_locked(sc, UNLOAD_NORMAL);
bxe_init_locked(sc, LOAD_NORMAL);
BXE_CORE_UNLOCK(sc);
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_MISC);
return (error);
}
/*
* Gets the current value of the RX Completion Consumer index
* from the fastpath status block, updates it as necessary if
* it is pointing to a "Next Page" entry, and returns it to the
* caller.
*
* Returns:
* The adjusted value of *fp->rx_cons_sb.
*/
static __inline uint16_t
bxe_rx_cq_cons(struct bxe_fastpath *fp)
{
volatile uint16_t rx_cq_cons_sb = 0;
rmb();
rx_cq_cons_sb = (volatile uint16_t) le16toh(*fp->rx_cq_cons_sb);
/*
* It is valid for the hardware's copy of the completion
* consumer index to be pointing at a "Next Page" entry in
* the completion chain but the driver prefers to assume
* that it is pointing at the next available CQE so we
* need to adjust the value accordingly.
*/
if ((rx_cq_cons_sb & USABLE_RCQ_ENTRIES_PER_PAGE) ==
USABLE_RCQ_ENTRIES_PER_PAGE)
rx_cq_cons_sb++;
return (rx_cq_cons_sb);
}
static __inline int
bxe_has_tx_work(struct bxe_fastpath *fp)
{
rmb();
return (((fp->tx_pkt_prod != le16toh(*fp->tx_pkt_cons_sb)) || \
(fp->tx_pkt_prod != fp->tx_pkt_cons)));
}
/*
* Checks if there are any received frames to process on the
* completion queue.
*
* Returns:
* 0 = No received frames pending, !0 = Received frames
* pending
*/
static __inline int
bxe_has_rx_work(struct bxe_fastpath *fp)
{
rmb();
return (bxe_rx_cq_cons(fp) != fp->rx_cq_cons);
}
/*
* Slowpath task entry point.
*
* Returns:
* None
*/
static void
bxe_task_sp(void *xsc, int pending)
{
struct bxe_softc *sc;
uint32_t sp_status;
sc = xsc;
DBPRINT(sc, BXE_EXTREME_INTR, "%s(): pending = %d.\n", __FUNCTION__,
pending);
/* Check for the source of the interrupt. */
sp_status = bxe_update_dsb_idx(sc);
/* Handle any hardware attentions. */
if (sp_status & 0x1) {
bxe_attn_int(sc);
sp_status &= ~0x1;
}
/* CSTORM event asserted (query_stats, port delete ramrod, etc.). */
if (sp_status & 0x2) {
sc->stats_pending = 0;
sp_status &= ~0x2;
}
/* Check for other weirdness. */
if (sp_status != 0) {
DBPRINT(sc, BXE_WARN, "%s(): Unexpected slowpath interrupt "
"(sp_status = 0x%04X)!\n", __FUNCTION__, sp_status);
}
/* Acknowledge the xSTORM tags and enable slowpath interrupts. */
bxe_ack_sb(sc, DEF_SB_ID, ATTENTION_ID, le16toh(sc->def_att_idx),
IGU_INT_NOP, 1);
bxe_ack_sb(sc, DEF_SB_ID, USTORM_ID, le16toh(sc->def_u_idx),
IGU_INT_NOP, 1);
bxe_ack_sb(sc, DEF_SB_ID, CSTORM_ID, le16toh(sc->def_c_idx),
IGU_INT_NOP, 1);
bxe_ack_sb(sc, DEF_SB_ID, XSTORM_ID, le16toh(sc->def_x_idx),
IGU_INT_NOP, 1);
bxe_ack_sb(sc, DEF_SB_ID, TSTORM_ID, le16toh(sc->def_t_idx),
IGU_INT_ENABLE, 1);
}
/*
* Legacy interrupt entry point.
*
* Verifies that the controller generated the interrupt and
* then calls a separate routine to handle the various
* interrupt causes: link, RX, and TX.
*
* Returns:
* None
*/
static void
bxe_intr_legacy(void *xsc)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
uint32_t mask, fp_status;
sc = xsc;
fp = &sc->fp[0];
/* Don't handle any interrupts if we're not ready. */
if (__predict_false(sc->intr_sem != 0))
goto bxe_intr_legacy_exit;
/* Bail out if the interrupt wasn't generated by our hardware. */
fp_status = bxe_ack_int(sc);
if (fp_status == 0)
goto bxe_intr_legacy_exit;
/* Handle the fastpath interrupt. */
/*
* sb_id = 0 for ustorm, 1 for cstorm.
* The bits returned from ack_int() are 0-15,
* bit 0=attention status block
* bit 1=fast path status block
* A mask of 0x2 or more = tx/rx event
* A mask of 1 = slow path event
*/
mask = (0x2 << fp->sb_id);
DBPRINT(sc, BXE_INSANE_INTR, "%s(): fp_status = 0x%08X, mask = "
"0x%08X\n", __FUNCTION__, fp_status, mask);
/* CSTORM event means fastpath completion. */
if (fp_status & mask) {
/* This interrupt must be ours, disable further interrupts. */
bxe_ack_sb(sc, fp->sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
#ifdef BXE_TASK
taskqueue_enqueue(fp->tq, &fp->task);
#else
bxe_task_fp((void *)fp, 0);
#endif
/* Clear this event from the status flags. */
fp_status &= ~mask;
}
/* Handle all slow path interrupts and attentions */
if (fp_status & 0x1) {
/* Acknowledge and disable further slowpath interrupts. */
bxe_ack_sb(sc, DEF_SB_ID, TSTORM_ID, 0, IGU_INT_DISABLE, 0);
#ifdef BXE_TASK
/* Schedule the slowpath task. */
taskqueue_enqueue(sc->tq, &sc->task);
#else
bxe_task_sp(xsc, 0);
#endif
/* Clear this event from the status flags. */
fp_status &= ~0x1;
}
#ifdef BXE_DEBUG
if (fp_status) {
DBPRINT(sc, BXE_WARN,
"%s(): Unexpected fastpath status (fp_status = 0x%08X)!\n",
__FUNCTION__, fp_status);
}
#endif
DBEXIT(BXE_EXTREME_INTR);
bxe_intr_legacy_exit:
return;
}
/*
* Slowpath interrupt entry point.
*
* Acknowledge the interrupt and schedule a slowpath task.
*
* Returns:
* None
*/
static void
bxe_intr_sp(void *xsc)
{
struct bxe_softc *sc;
sc = xsc;
DBPRINT(sc, BXE_INSANE_INTR, "%s(%d): Slowpath interrupt.\n",
__FUNCTION__, curcpu);
/* Don't handle any interrupts if we're not ready. */
if (__predict_false(sc->intr_sem != 0))
goto bxe_intr_sp_exit;
/* Acknowledge and disable further slowpath interrupts. */
bxe_ack_sb(sc, DEF_SB_ID, TSTORM_ID, 0, IGU_INT_DISABLE, 0);
#ifdef BXE_TASK
/* Schedule the slowpath task. */
taskqueue_enqueue(sc->tq, &sc->task);
#else
bxe_task_sp(xsc, 0);
#endif
bxe_intr_sp_exit:
return;
}
/*
* Fastpath interrupt entry point.
*
* Acknowledge the interrupt and schedule a fastpath task.
*
* Returns:
* None
*/
static void
bxe_intr_fp (void *xfp)
{
struct bxe_fastpath *fp;
struct bxe_softc *sc;
fp = xfp;
sc = fp->sc;
DBPRINT(sc, BXE_INSANE_INTR,
"%s(%d): fp[%02d].sb_id = %d interrupt.\n",
__FUNCTION__, curcpu, fp->index, fp->sb_id);
/* Don't handle any interrupts if we're not ready. */
if (__predict_false(sc->intr_sem != 0))
goto bxe_intr_fp_exit;
/* Disable further interrupts. */
bxe_ack_sb(sc, fp->sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
#ifdef BXE_TASK
taskqueue_enqueue(fp->tq, &fp->task);
#else
bxe_task_fp (xfp, 0);
#endif
bxe_intr_fp_exit:
return;
}
/*
* Fastpath task entry point.
*
* Handle any pending transmit or receive events.
*
* Returns:
* None
*/
static void
bxe_task_fp (void *xfp, int pending)
{
struct bxe_fastpath *fp;
struct bxe_softc *sc;
fp = xfp;
sc = fp->sc;
DBPRINT(sc, BXE_EXTREME_INTR, "%s(%d): Fastpath task on fp[%02d]"
".sb_id = %d\n", __FUNCTION__, curcpu, fp->index, fp->sb_id);
/* Update the fast path indices */
bxe_update_fpsb_idx(fp);
/* Service any completed TX frames. */
if (bxe_has_tx_work(fp)) {
BXE_FP_LOCK(fp);
bxe_txeof(fp);
BXE_FP_UNLOCK(fp);
}
/* Service any completed RX frames. */
rmb();
bxe_rxeof(fp);
/* Acknowledge the fastpath status block indices. */
bxe_ack_sb(sc, fp->sb_id, USTORM_ID, fp->fp_u_idx, IGU_INT_NOP, 1);
bxe_ack_sb(sc, fp->sb_id, CSTORM_ID, fp->fp_c_idx, IGU_INT_ENABLE, 1);
}
/*
* Clears the fastpath (per-queue) status block.
*
* Returns:
* None
*/
static void
bxe_zero_sb(struct bxe_softc *sc, int sb_id)
{
int port;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR);
port = BP_PORT(sc);
/* "CSTORM" */
bxe_init_fill(sc, CSEM_REG_FAST_MEMORY +
CSTORM_SB_HOST_STATUS_BLOCK_U_OFFSET(port, sb_id), 0,
CSTORM_SB_STATUS_BLOCK_U_SIZE / 4);
bxe_init_fill(sc, CSEM_REG_FAST_MEMORY +
CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id), 0,
CSTORM_SB_STATUS_BLOCK_C_SIZE / 4);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR);
}
/*
* Initialize the fastpath (per queue) status block.
*
* Returns:
* None
*/
static void
bxe_init_sb(struct bxe_softc *sc, struct host_status_block *sb,
bus_addr_t mapping, int sb_id)
{
uint64_t section;
int func, index, port;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR);
port = BP_PORT(sc);
func = BP_FUNC(sc);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR),
"%s(): Initializing sb_id = %d on port %d, function %d.\n",
__FUNCTION__, sb_id, port, func);
/* Setup the USTORM status block. */
section = ((uint64_t)mapping) + offsetof(struct host_status_block,
u_status_block);
sb->u_status_block.status_block_id = sb_id;
REG_WR(sc, BAR_CSTORM_INTMEM +
CSTORM_SB_HOST_SB_ADDR_U_OFFSET(port, sb_id), U64_LO(section));
REG_WR(sc, BAR_CSTORM_INTMEM +
((CSTORM_SB_HOST_SB_ADDR_U_OFFSET(port, sb_id)) + 4),
U64_HI(section));
REG_WR8(sc, BAR_CSTORM_INTMEM + FP_USB_FUNC_OFF +
CSTORM_SB_HOST_STATUS_BLOCK_U_OFFSET(port, sb_id), func);
for (index = 0; index < HC_USTORM_SB_NUM_INDICES; index++)
REG_WR16(sc, BAR_CSTORM_INTMEM +
CSTORM_SB_HC_DISABLE_U_OFFSET(port, sb_id, index), 0x1);
/* Setup the CSTORM status block. */
section = ((uint64_t)mapping) + offsetof(struct host_status_block,
c_status_block);
sb->c_status_block.status_block_id = sb_id;
/* Write the status block address to CSTORM. Order is important! */
REG_WR(sc, BAR_CSTORM_INTMEM +
CSTORM_SB_HOST_SB_ADDR_C_OFFSET(port, sb_id), U64_LO(section));
REG_WR(sc, BAR_CSTORM_INTMEM +
((CSTORM_SB_HOST_SB_ADDR_C_OFFSET(port, sb_id)) + 4),
U64_HI(section));
REG_WR8(sc, BAR_CSTORM_INTMEM + FP_CSB_FUNC_OFF +
CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id), func);
for (index = 0; index < HC_CSTORM_SB_NUM_INDICES; index++)
REG_WR16(sc, BAR_CSTORM_INTMEM +
CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id, index), 0x1);
/* Enable interrupts. */
bxe_ack_sb(sc, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR);
}
/*
* Clears the default status block.
*
* Returns:
* None
*/
static void
bxe_zero_def_sb(struct bxe_softc *sc)
{
int func;
func = BP_FUNC(sc);
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR),
"%s(): Clearing default status block on function %d.\n",
__FUNCTION__, func);
/* Fill the STORM's copy of the default status block with 0. */
bxe_init_fill(sc, TSEM_REG_FAST_MEMORY +
TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
sizeof(struct tstorm_def_status_block) / 4);
bxe_init_fill(sc, CSEM_REG_FAST_MEMORY +
CSTORM_DEF_SB_HOST_STATUS_BLOCK_U_OFFSET(func), 0,
sizeof(struct cstorm_def_status_block_u) / 4);
bxe_init_fill(sc, CSEM_REG_FAST_MEMORY +
CSTORM_DEF_SB_HOST_STATUS_BLOCK_C_OFFSET(func), 0,
sizeof(struct cstorm_def_status_block_c) / 4);
bxe_init_fill(sc, XSEM_REG_FAST_MEMORY +
XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
sizeof(struct xstorm_def_status_block) / 4);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR);
}
/*
* Initialize default status block.
*
* Returns:
* None
*/
static void
bxe_init_def_sb(struct bxe_softc *sc, struct host_def_status_block *def_sb,
bus_addr_t mapping, int sb_id)
{
uint64_t section;
int func, index, port, reg_offset, val;
port = BP_PORT(sc);
func = BP_FUNC(sc);
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR),
"%s(): Initializing default status block on port %d, function %d.\n",
__FUNCTION__, port, func);
/* Setup the default status block (DSB). */
section = ((uint64_t)mapping) + offsetof(struct host_def_status_block,
atten_status_block);
def_sb->atten_status_block.status_block_id = sb_id;
sc->attn_state = 0;
sc->def_att_idx = 0;
/*
* Read routing configuration for attn signal
* output of groups. Currently, only groups
* 0 through 3 are wired.
*/
reg_offset = port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
sc->attn_group[index].sig[0] = REG_RD(sc, reg_offset +
0x10 * index);
sc->attn_group[index].sig[1] = REG_RD(sc, reg_offset +
0x10 * index + 0x4);
sc->attn_group[index].sig[2] = REG_RD(sc, reg_offset +
0x10 * index + 0x8);
sc->attn_group[index].sig[3] = REG_RD(sc, reg_offset +
0x10 * index + 0xc);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET |
BXE_VERBOSE_INTR),
"%s(): attn_group[%d] = 0x%08X 0x%08X 0x%08x 0X%08x\n",
__FUNCTION__, index, sc->attn_group[index].sig[0],
sc->attn_group[index].sig[1], sc->attn_group[index].sig[2],
sc->attn_group[index].sig[3]);
}
reg_offset = port ? HC_REG_ATTN_MSG1_ADDR_L : HC_REG_ATTN_MSG0_ADDR_L;
REG_WR(sc, reg_offset, U64_LO(section));
REG_WR(sc, reg_offset + 4, U64_HI(section));
reg_offset = port ? HC_REG_ATTN_NUM_P1 : HC_REG_ATTN_NUM_P0;
val = REG_RD(sc, reg_offset);
val |= sb_id;
REG_WR(sc, reg_offset, val);
/* USTORM */
section = ((uint64_t)mapping) + offsetof(struct host_def_status_block,
u_def_status_block);
def_sb->u_def_status_block.status_block_id = sb_id;
sc->def_u_idx = 0;
REG_WR(sc, BAR_CSTORM_INTMEM +
CSTORM_DEF_SB_HOST_SB_ADDR_U_OFFSET(func), U64_LO(section));
REG_WR(sc, BAR_CSTORM_INTMEM +
((CSTORM_DEF_SB_HOST_SB_ADDR_U_OFFSET(func)) + 4), U64_HI(section));
REG_WR8(sc, BAR_CSTORM_INTMEM + DEF_USB_FUNC_OFF +
CSTORM_DEF_SB_HOST_STATUS_BLOCK_U_OFFSET(func), func);
for (index = 0; index < HC_USTORM_DEF_SB_NUM_INDICES; index++)
REG_WR16(sc, BAR_CSTORM_INTMEM +
CSTORM_DEF_SB_HC_DISABLE_U_OFFSET(func, index), 1);
/* CSTORM */
section = ((uint64_t)mapping) + offsetof(struct host_def_status_block,
c_def_status_block);
def_sb->c_def_status_block.status_block_id = sb_id;
sc->def_c_idx = 0;
REG_WR(sc, BAR_CSTORM_INTMEM +
CSTORM_DEF_SB_HOST_SB_ADDR_C_OFFSET(func), U64_LO(section));
REG_WR(sc, BAR_CSTORM_INTMEM +
((CSTORM_DEF_SB_HOST_SB_ADDR_C_OFFSET(func)) + 4), U64_HI(section));
REG_WR8(sc, BAR_CSTORM_INTMEM + DEF_CSB_FUNC_OFF +
CSTORM_DEF_SB_HOST_STATUS_BLOCK_C_OFFSET(func), func);
for (index = 0; index < HC_CSTORM_DEF_SB_NUM_INDICES; index++)
REG_WR16(sc, BAR_CSTORM_INTMEM +
CSTORM_DEF_SB_HC_DISABLE_C_OFFSET(func, index), 1);
/* TSTORM */
section = ((uint64_t)mapping) + offsetof(struct host_def_status_block,
t_def_status_block);
def_sb->t_def_status_block.status_block_id = sb_id;
sc->def_t_idx = 0;
REG_WR(sc, BAR_TSTORM_INTMEM +
TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
REG_WR(sc, BAR_TSTORM_INTMEM +
((TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4), U64_HI(section));
REG_WR8(sc, BAR_TSTORM_INTMEM + DEF_TSB_FUNC_OFF +
TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
for (index = 0; index < HC_TSTORM_DEF_SB_NUM_INDICES; index++)
REG_WR16(sc, BAR_TSTORM_INTMEM +
TSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
/* XSTORM */
section = ((uint64_t)mapping) + offsetof(struct host_def_status_block,
x_def_status_block);
def_sb->x_def_status_block.status_block_id = sb_id;
sc->def_x_idx = 0;
REG_WR(sc, BAR_XSTORM_INTMEM +
XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
REG_WR(sc, BAR_XSTORM_INTMEM +
((XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4), U64_HI(section));
REG_WR8(sc, BAR_XSTORM_INTMEM + DEF_XSB_FUNC_OFF +
XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
for (index = 0; index < HC_XSTORM_DEF_SB_NUM_INDICES; index++)
REG_WR16(sc, BAR_XSTORM_INTMEM +
XSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
sc->stats_pending = 0;
sc->set_mac_pending = 0;
bxe_ack_sb(sc, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_INTR);
}
/*
* Update interrupt coalescing parameters.
*
* Returns:
* None
*/
static void
bxe_update_coalesce(struct bxe_softc *sc)
{
int i, port, sb_id;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
port = BP_PORT(sc);
/* Cycle through each fastpath queue and set the coalescing values. */
for (i = 0; i < sc->num_queues; i++) {
sb_id = sc->fp[i].sb_id;
/* Receive interrupt coalescing is done on USTORM. */
REG_WR8(sc, BAR_CSTORM_INTMEM +
CSTORM_SB_HC_TIMEOUT_U_OFFSET(port, sb_id,
U_SB_ETH_RX_CQ_INDEX), sc->rx_ticks / (BXE_BTR * 4));
REG_WR16(sc, BAR_CSTORM_INTMEM +
CSTORM_SB_HC_DISABLE_U_OFFSET(port, sb_id,
U_SB_ETH_RX_CQ_INDEX),
(sc->rx_ticks / (BXE_BTR * 4)) ? 0 : 1);
/* Transmit interrupt coalescing is done on CSTORM. */
REG_WR8(sc, BAR_CSTORM_INTMEM +
CSTORM_SB_HC_TIMEOUT_C_OFFSET(port, sb_id,
C_SB_ETH_TX_CQ_INDEX), sc->tx_ticks / (BXE_BTR * 4));
REG_WR16(sc, BAR_CSTORM_INTMEM +
CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id,
C_SB_ETH_TX_CQ_INDEX),
(sc->tx_ticks / (BXE_BTR * 4)) ? 0 : 1);
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Allocate an mbuf and assign it to the TPA pool.
*
* Returns:
* 0 = Success, !0 = Failure
*
* Modifies:
* fp->tpa_mbuf_ptr[queue]
* fp->tpa_mbuf_map[queue]
* fp->tpa_mbuf_segs[queue]
*/
static int
bxe_alloc_tpa_mbuf(struct bxe_fastpath *fp, int queue)
{
struct bxe_softc *sc;
bus_dma_segment_t segs[1];
bus_dmamap_t map;
struct mbuf *m;
int nsegs, rc;
sc = fp->sc;
DBENTER(BXE_INSANE_TPA);
rc = 0;
DBRUNIF((fp->disable_tpa == TRUE),
BXE_PRINTF("%s(): fp[%02d] TPA disabled!\n",
__FUNCTION__, fp->index));
#ifdef BXE_DEBUG
/* Simulate an mbuf allocation failure. */
if (DB_RANDOMTRUE(bxe_debug_mbuf_allocation_failure)) {
sc->debug_sim_mbuf_alloc_failed++;
fp->mbuf_tpa_alloc_failed++;
rc = ENOMEM;
goto bxe_alloc_tpa_mbuf_exit;
}
#endif
/* Allocate the new TPA mbuf. */
m = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR, sc->mbuf_alloc_size);
if (__predict_false(m == NULL)) {
fp->mbuf_tpa_alloc_failed++;
rc = ENOBUFS;
goto bxe_alloc_tpa_mbuf_exit;
}
DBRUN(fp->tpa_mbuf_alloc++);
/* Initialize the mbuf buffer length. */
m->m_pkthdr.len = m->m_len = sc->mbuf_alloc_size;
#ifdef BXE_DEBUG
/* Simulate an mbuf mapping failure. */
if (DB_RANDOMTRUE(bxe_debug_dma_map_addr_failure)) {
sc->debug_sim_mbuf_map_failed++;
fp->mbuf_tpa_mapping_failed++;
m_freem(m);
DBRUN(fp->tpa_mbuf_alloc--);
rc = ENOMEM;
goto bxe_alloc_tpa_mbuf_exit;
}
#endif
/* Map the TPA mbuf into non-paged pool. */
rc = bus_dmamap_load_mbuf_sg(fp->rx_mbuf_tag,
fp->tpa_mbuf_spare_map, m, segs, &nsegs, BUS_DMA_NOWAIT);
if (__predict_false(rc != 0)) {
fp->mbuf_tpa_mapping_failed++;
m_free(m);
DBRUN(fp->tpa_mbuf_alloc--);
goto bxe_alloc_tpa_mbuf_exit;
}
/* All mubfs must map to a single segment. */
KASSERT(nsegs == 1, ("%s(): Too many segments (%d) returned!",
__FUNCTION__, nsegs));
/* Release any existing TPA mbuf mapping. */
if (fp->tpa_mbuf_map[queue] != NULL) {
bus_dmamap_sync(fp->rx_mbuf_tag,
fp->tpa_mbuf_map[queue], BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(fp->rx_mbuf_tag,
fp->tpa_mbuf_map[queue]);
}
/* Save the mbuf and mapping info for the TPA mbuf. */
map = fp->tpa_mbuf_map[queue];
fp->tpa_mbuf_map[queue] = fp->tpa_mbuf_spare_map;
fp->tpa_mbuf_spare_map = map;
bus_dmamap_sync(fp->rx_mbuf_tag,
fp->tpa_mbuf_map[queue], BUS_DMASYNC_PREREAD);
fp->tpa_mbuf_ptr[queue] = m;
fp->tpa_mbuf_segs[queue] = segs[0];
bxe_alloc_tpa_mbuf_exit:
DBEXIT(BXE_INSANE_TPA);
return (rc);
}
/*
* Allocate mbufs for a fastpath TPA pool.
*
* Returns:
* 0 = Success, !0 = Failure.
*
* Modifies:
* fp->tpa_state[]
* fp->disable_tpa
*/
static int
bxe_fill_tpa_pool(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
int max_agg_queues, queue, rc;
sc = fp->sc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
rc = 0;
if (!TPA_ENABLED(sc)) {
fp->disable_tpa = TRUE;
goto bxe_fill_tpa_pool_exit;
}
max_agg_queues = CHIP_IS_E1(sc) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
ETH_MAX_AGGREGATION_QUEUES_E1H;
/* Assume the fill operation worked. */
fp->disable_tpa = FALSE;
/* Fill the TPA pool. */
for (queue = 0; queue < max_agg_queues; queue++) {
rc = bxe_alloc_tpa_mbuf(fp, queue);
if (rc != 0) {
BXE_PRINTF(
"%s(%d): fp[%02d] TPA disabled!\n",
__FILE__, __LINE__, fp->index);
fp->disable_tpa = TRUE;
break;
}
fp->tpa_state[queue] = BXE_TPA_STATE_STOP;
}
bxe_fill_tpa_pool_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Free all mbufs from a fastpath TPA pool.
*
* Returns:
* None
*
* Modifies:
* fp->tpa_mbuf_ptr[]
* fp->tpa_mbuf_map[]
* fp->tpa_mbuf_alloc
*/
static void
bxe_free_tpa_pool(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
int i, max_agg_queues;
sc = fp->sc;
DBENTER(BXE_INSANE_LOAD | BXE_INSANE_UNLOAD | BXE_INSANE_TPA);
if (fp->rx_mbuf_tag == NULL)
goto bxe_free_tpa_pool_exit;
max_agg_queues = CHIP_IS_E1H(sc) ?
ETH_MAX_AGGREGATION_QUEUES_E1H :
ETH_MAX_AGGREGATION_QUEUES_E1;
/* Release all mbufs and and all DMA maps in the TPA pool. */
for (i = 0; i < max_agg_queues; i++) {
if (fp->tpa_mbuf_map[i] != NULL) {
bus_dmamap_sync(fp->rx_mbuf_tag, fp->tpa_mbuf_map[i],
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(fp->rx_mbuf_tag, fp->tpa_mbuf_map[i]);
}
if (fp->tpa_mbuf_ptr[i] != NULL) {
m_freem(fp->tpa_mbuf_ptr[i]);
DBRUN(fp->tpa_mbuf_alloc--);
fp->tpa_mbuf_ptr[i] = NULL;
}
}
bxe_free_tpa_pool_exit:
DBEXIT(BXE_INSANE_LOAD | BXE_INSANE_UNLOAD | BXE_INSANE_TPA);
}
/*
* Allocate an mbuf and assign it to the receive scatter gather chain.
* The caller must take care to save a copy of the existing mbuf in the
* SG mbuf chain.
*
* Returns:
* 0 = Success, !0= Failure.
*
* Modifies:
* fp->sg_chain[index]
* fp->rx_sge_buf_ptr[index]
* fp->rx_sge_buf_map[index]
* fp->rx_sge_spare_map
*/
static int
bxe_alloc_rx_sge_mbuf(struct bxe_fastpath *fp, uint16_t index)
{
struct bxe_softc *sc;
struct eth_rx_sge *sge;
bus_dma_segment_t segs[1];
bus_dmamap_t map;
struct mbuf *m;
int nsegs, rc;
sc = fp->sc;
DBENTER(BXE_INSANE_TPA);
rc = 0;
#ifdef BXE_DEBUG
/* Simulate an mbuf allocation failure. */
if (DB_RANDOMTRUE(bxe_debug_mbuf_allocation_failure)) {
sc->debug_sim_mbuf_alloc_failed++;
fp->mbuf_sge_alloc_failed++;
rc = ENOMEM;
goto bxe_alloc_rx_sge_mbuf_exit;
}
#endif
/* Allocate a new SGE mbuf. */
m = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR, SGE_PAGE_SIZE);
if (__predict_false(m == NULL)) {
fp->mbuf_sge_alloc_failed++;
rc = ENOMEM;
goto bxe_alloc_rx_sge_mbuf_exit;
}
DBRUN(fp->sge_mbuf_alloc++);
/* Initialize the mbuf buffer length. */
m->m_pkthdr.len = m->m_len = SGE_PAGE_SIZE;
#ifdef BXE_DEBUG
/* Simulate an mbuf mapping failure. */
if (DB_RANDOMTRUE(bxe_debug_dma_map_addr_failure)) {
sc->debug_sim_mbuf_map_failed++;
fp->mbuf_sge_mapping_failed++;
m_freem(m);
DBRUN(fp->sge_mbuf_alloc--);
rc = ENOMEM;
goto bxe_alloc_rx_sge_mbuf_exit;
}
#endif
/* Map the SGE mbuf into non-paged pool. */
rc = bus_dmamap_load_mbuf_sg(fp->rx_sge_buf_tag,
fp->rx_sge_spare_map, m, segs, &nsegs, BUS_DMA_NOWAIT);
if (__predict_false(rc != 0)) {
fp->mbuf_sge_mapping_failed++;
m_freem(m);
DBRUN(fp->sge_mbuf_alloc--);
goto bxe_alloc_rx_sge_mbuf_exit;
}
/* All mubfs must map to a single segment. */
KASSERT(nsegs == 1, ("%s(): Too many segments (%d) returned!",
__FUNCTION__, nsegs));
/* Unload any existing SGE mbuf mapping. */
if (fp->rx_sge_buf_map[index] != NULL) {
bus_dmamap_sync(fp->rx_sge_buf_tag,
fp->rx_sge_buf_map[index], BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(fp->rx_sge_buf_tag,
fp->rx_sge_buf_map[index]);
}
/* Add the new SGE mbuf to the SGE ring. */
map = fp->rx_sge_buf_map[index];
fp->rx_sge_buf_map[index] = fp->rx_sge_spare_map;
fp->rx_sge_spare_map = map;
bus_dmamap_sync(fp->rx_sge_buf_tag,
fp->rx_sge_buf_map[index], BUS_DMASYNC_PREREAD);
fp->rx_sge_buf_ptr[index] = m;
sge = &fp->sg_chain[index];
sge->addr_hi = htole32(U64_HI(segs[0].ds_addr));
sge->addr_lo = htole32(U64_LO(segs[0].ds_addr));
bxe_alloc_rx_sge_mbuf_exit:
DBEXIT(BXE_INSANE_TPA);
return (rc);
}
/*
* Allocate mbufs for a SGE chain.
*
* Returns:
* 0 = Success, !0 = Failure.
*
* Modifies:
* fp->disable_tpa
* fp->rx_sge_prod
*/
static int
bxe_fill_sg_chain(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
uint16_t index;
int i, rc;
sc = fp->sc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
rc = 0;
if (!TPA_ENABLED(sc)) {
fp->disable_tpa = TRUE;
goto bxe_fill_sg_chain_exit;
}
/* Assume the fill operation works. */
fp->disable_tpa = FALSE;
/* Fill the RX SGE chain. */
index = 0;
for (i = 0; i < USABLE_RX_SGE; i++) {
rc = bxe_alloc_rx_sge_mbuf(fp, index);
if (rc != 0) {
BXE_PRINTF(
"%s(%d): fp[%02d] SGE memory allocation failure!\n",
__FILE__, __LINE__, fp->index);
index = 0;
fp->disable_tpa = TRUE;
break;
}
index = NEXT_SGE_IDX(index);
}
/* Update the driver's copy of the RX SGE producer index. */
fp->rx_sge_prod = index;
bxe_fill_sg_chain_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Free all elements from the receive scatter gather chain.
*
* Returns:
* None
*
* Modifies:
* fp->rx_sge_buf_ptr[]
* fp->rx_sge_buf_map[]
* fp->sge_mbuf_alloc
*/
static void
bxe_free_sg_chain(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
int i;
sc = fp->sc;
DBENTER(BXE_INSANE_TPA);
if (fp->rx_sge_buf_tag == NULL)
goto bxe_free_sg_chain_exit;
/* Free all mbufs and unload all maps. */
for (i = 0; i < TOTAL_RX_SGE; i++) {
/* Free the map and the mbuf if they're allocated. */
if (fp->rx_sge_buf_map[i] != NULL) {
bus_dmamap_sync(fp->rx_sge_buf_tag,
fp->rx_sge_buf_map[i], BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(fp->rx_sge_buf_tag,
fp->rx_sge_buf_map[i]);
}
if (fp->rx_sge_buf_ptr[i] != NULL) {
m_freem(fp->rx_sge_buf_ptr[i]);
DBRUN(fp->sge_mbuf_alloc--);
fp->rx_sge_buf_ptr[i] = NULL;
}
}
bxe_free_sg_chain_exit:
DBEXIT(BXE_INSANE_TPA);
}
/*
* Allocate an mbuf, if necessary, and add it to the receive chain.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_alloc_rx_bd_mbuf(struct bxe_fastpath *fp, uint16_t index)
{
struct bxe_softc *sc;
struct eth_rx_bd *rx_bd;
bus_dma_segment_t segs[1];
bus_dmamap_t map;
struct mbuf *m;
int nsegs, rc;
sc = fp->sc;
DBENTER(BXE_INSANE_LOAD | BXE_INSANE_RESET | BXE_INSANE_RECV);
rc = 0;
#ifdef BXE_DEBUG
/* Simulate an mbuf allocation failure. */
if (DB_RANDOMTRUE(bxe_debug_mbuf_allocation_failure)) {
sc->debug_sim_mbuf_alloc_failed++;
fp->mbuf_rx_bd_alloc_failed++;
rc = ENOMEM;
goto bxe_alloc_rx_bd_mbuf_exit;
}
#endif
/* Allocate the new RX BD mbuf. */
m = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR, sc->mbuf_alloc_size);
if (__predict_false(m == NULL)) {
fp->mbuf_rx_bd_alloc_failed++;
rc = ENOBUFS;
goto bxe_alloc_rx_bd_mbuf_exit;
}
DBRUN(fp->rx_mbuf_alloc++);
/* Initialize the mbuf buffer length. */
m->m_pkthdr.len = m->m_len = sc->mbuf_alloc_size;
#ifdef BXE_DEBUG
/* Simulate an mbuf mapping failure. */
if (DB_RANDOMTRUE(bxe_debug_dma_map_addr_failure)) {
sc->debug_sim_mbuf_map_failed++;
fp->mbuf_rx_bd_mapping_failed++;
m_freem(m);
DBRUN(fp->rx_mbuf_alloc--);
rc = ENOMEM;
goto bxe_alloc_rx_bd_mbuf_exit;
}
#endif
/* Map the TPA mbuf into non-paged pool. */
rc = bus_dmamap_load_mbuf_sg(fp->rx_mbuf_tag,
fp->rx_mbuf_spare_map, m, segs, &nsegs, BUS_DMA_NOWAIT);
if (__predict_false(rc != 0)) {
fp->mbuf_rx_bd_mapping_failed++;
m_freem(m);
DBRUN(fp->rx_mbuf_alloc--);
goto bxe_alloc_rx_bd_mbuf_exit;
}
/* All mubfs must map to a single segment. */
KASSERT(nsegs == 1, ("%s(): Too many segments (%d) returned!",
__FUNCTION__, nsegs));
/* Release any existing RX BD mbuf mapping. */
if (fp->rx_mbuf_map[index] != NULL) {
bus_dmamap_sync(fp->rx_mbuf_tag,
fp->rx_mbuf_map[index], BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(fp->rx_mbuf_tag,
fp->rx_mbuf_map[index]);
}
/* Save the mbuf and mapping info. */
map = fp->rx_mbuf_map[index];
fp->rx_mbuf_map[index] = fp->rx_mbuf_spare_map;
fp->rx_mbuf_spare_map = map;
bus_dmamap_sync(fp->rx_mbuf_tag,
fp->rx_mbuf_map[index], BUS_DMASYNC_PREREAD);
fp->rx_mbuf_ptr[index] = m;
rx_bd = &fp->rx_chain[index];
rx_bd->addr_hi = htole32(U64_HI(segs[0].ds_addr));
rx_bd->addr_lo = htole32(U64_LO(segs[0].ds_addr));
bxe_alloc_rx_bd_mbuf_exit:
DBEXIT(BXE_INSANE_LOAD | BXE_INSANE_RESET | BXE_INSANE_RECV);
return (rc);
}
/*
* Allocate mbufs for a receive chain.
*
* Returns:
* 0 = Success, !0 = Failure.
*
* Modifies:
* fp->rx_bd_prod
*/
static int
bxe_fill_rx_bd_chain(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
uint16_t index;
int i, rc;
sc = fp->sc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
rc = index = 0;
/* Allocate buffers for all the RX BDs in RX BD Chain. */
for (i = 0; i < USABLE_RX_BD; i++) {
rc = bxe_alloc_rx_bd_mbuf(fp, index);
if (rc != 0) {
BXE_PRINTF(
"%s(%d): Memory allocation failure! Cannot fill fp[%02d] RX chain.\n",
__FILE__, __LINE__, fp->index);
index = 0;
break;
}
index = NEXT_RX_BD(index);
}
fp->rx_bd_prod = index;
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Free all buffers from the receive chain.
*
* Returns:
* None
*
* Modifies:
* fp->rx_mbuf_ptr[]
* fp->rx_mbuf_map[]
* fp->rx_mbuf_alloc
*/
static void
bxe_free_rx_bd_chain(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
int i;
sc = fp->sc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
if (fp->rx_mbuf_tag == NULL)
goto bxe_free_rx_bd_chain_exit;
/* Free all mbufs and unload all maps. */
for (i = 0; i < TOTAL_RX_BD; i++) {
if (fp->rx_mbuf_map[i] != NULL) {
bus_dmamap_sync(fp->rx_mbuf_tag, fp->rx_mbuf_map[i],
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(fp->rx_mbuf_tag, fp->rx_mbuf_map[i]);
}
if (fp->rx_mbuf_ptr[i] != NULL) {
m_freem(fp->rx_mbuf_ptr[i]);
DBRUN(fp->rx_mbuf_alloc--);
fp->rx_mbuf_ptr[i] = NULL;
}
}
bxe_free_rx_bd_chain_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Setup mutexes used by the driver.
*
* Returns:
* None.
*/
static void
bxe_mutexes_alloc(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i;
DBENTER(BXE_VERBOSE_LOAD);
BXE_CORE_LOCK_INIT(sc, device_get_nameunit(sc->dev));
BXE_SP_LOCK_INIT(sc, "bxe_sp_lock");
BXE_DMAE_LOCK_INIT(sc, "bxe_dmae_lock");
BXE_PHY_LOCK_INIT(sc, "bxe_phy_lock");
BXE_FWMB_LOCK_INIT(sc, "bxe_fwmb_lock");
BXE_PRINT_LOCK_INIT(sc, "bxe_print_lock");
/* Allocate one mutex for each fastpath structure. */
for (i = 0; i < sc->num_queues; i++ ) {
fp = &sc->fp[i];
/* Allocate per fastpath mutexes. */
snprintf(fp->mtx_name, sizeof(fp->mtx_name), "%s:fp[%02d]",
device_get_nameunit(sc->dev), fp->index);
mtx_init(&fp->mtx, fp->mtx_name, NULL, MTX_DEF);
}
DBEXIT(BXE_VERBOSE_LOAD);
}
/*
* Free mutexes used by the driver.
*
* Returns:
* None.
*/
static void
bxe_mutexes_free(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i;
DBENTER(BXE_VERBOSE_UNLOAD);
for (i = 0; i < sc->num_queues; i++ ) {
fp = &sc->fp[i];
/* Release per fastpath mutexes. */
if (mtx_initialized(&fp->mtx))
mtx_destroy(&fp->mtx);
}
BXE_PRINT_LOCK_DESTROY(sc);
BXE_FWMB_LOCK_DESTROY(sc);
BXE_PHY_LOCK_DESTROY(sc);
BXE_DMAE_LOCK_DESTROY(sc);
BXE_SP_LOCK_DESTROY(sc);
BXE_CORE_LOCK_DESTROY(sc);
DBEXIT(BXE_VERBOSE_UNLOAD);
}
/*
* Free memory and clear the RX data structures.
*
* Returns:
* Nothing.
*/
static void
bxe_clear_rx_chains(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i;
DBENTER(BXE_VERBOSE_RESET);
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
/* Free all RX buffers. */
bxe_free_rx_bd_chain(fp);
bxe_free_tpa_pool(fp);
bxe_free_sg_chain(fp);
/* Check if any mbufs lost in the process. */
DBRUNIF((fp->tpa_mbuf_alloc), DBPRINT(sc, BXE_FATAL,
"%s(): Memory leak! Lost %d mbufs from fp[%02d] TPA pool!\n",
__FUNCTION__, fp->tpa_mbuf_alloc, fp->index));
DBRUNIF((fp->sge_mbuf_alloc), DBPRINT(sc, BXE_FATAL,
"%s(): Memory leak! Lost %d mbufs from fp[%02d] SGE chain!\n",
__FUNCTION__, fp->sge_mbuf_alloc, fp->index));
DBRUNIF((fp->rx_mbuf_alloc), DBPRINT(sc, BXE_FATAL,
"%s(): Memory leak! Lost %d mbufs from fp[%02d] RX chain!\n",
__FUNCTION__, fp->rx_mbuf_alloc, fp->index));
}
DBEXIT(BXE_VERBOSE_RESET);
}
/*
* Initialize the receive rings.
*
* Returns:
* None.
*/
static int
bxe_init_rx_chains(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int func, i, rc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
rc = 0;
func = BP_FUNC(sc);
/* Allocate memory for RX and CQ chains. */
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Initializing fp[%02d] RX chain.\n", __FUNCTION__, i);
fp->rx_bd_cons = fp->rx_bd_prod = 0;
fp->rx_cq_cons = fp->rx_cq_prod = 0;
/* Pointer to status block's CQ consumer index. */
fp->rx_cq_cons_sb = &fp->status_block->
u_status_block.index_values[HC_INDEX_U_ETH_RX_CQ_CONS];
/* Pointer to status block's receive consumer index. */
fp->rx_bd_cons_sb = &fp->status_block->
u_status_block.index_values[HC_INDEX_U_ETH_RX_BD_CONS];
fp->rx_cq_prod = TOTAL_RCQ_ENTRIES;
fp->rx_pkts = fp->rx_tpa_pkts = fp->rx_soft_errors = 0;
/* Allocate memory for the receive chain. */
rc = bxe_fill_rx_bd_chain(fp);
if (rc != 0)
goto bxe_init_rx_chains_exit;
/* Allocate memory for TPA pool. */
rc = bxe_fill_tpa_pool(fp);
if (rc != 0)
goto bxe_init_rx_chains_exit;
/* Allocate memory for scatter-gather chain. */
rc = bxe_fill_sg_chain(fp);
if (rc != 0)
goto bxe_init_rx_chains_exit;
/* Prepare the receive BD and CQ buffers for DMA access. */
bus_dmamap_sync(fp->rx_dma.tag, fp->rx_dma.map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(fp->rcq_dma.tag, fp->rcq_dma.map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/*
* Tell the controller that we have rx_bd's and CQE's
* available. Warning! this will generate an interrupt
* (to the TSTORM). This must only be done when the
* controller is initialized.
*/
bxe_update_rx_prod(sc, fp, fp->rx_bd_prod,
fp->rx_cq_prod, fp->rx_sge_prod);
/* ToDo - Move to dma_alloc(). */
/*
* Tell controller where the receive CQ
* chains start in physical memory.
*/
if (i == 0) {
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func),
U64_LO(fp->rcq_dma.paddr));
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func) + 4,
U64_HI(fp->rcq_dma.paddr));
}
}
bxe_init_rx_chains_exit:
/* Release memory if an error occurred. */
if (rc != 0)
bxe_clear_rx_chains(sc);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Free memory and clear the TX data structures.
*
* Returns:
* Nothing.
*/
static void
bxe_clear_tx_chains(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i, j;
DBENTER(BXE_VERBOSE_RESET);
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
/* Free all mbufs and unload all maps. */
if (fp->tx_mbuf_tag) {
for (j = 0; j < TOTAL_TX_BD; j++) {
if (fp->tx_mbuf_ptr[j] != NULL) {
bus_dmamap_sync(fp->tx_mbuf_tag,
fp->tx_mbuf_map[j],
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(fp->tx_mbuf_tag,
fp->tx_mbuf_map[j]);
m_freem(fp->tx_mbuf_ptr[j]);
fp->tx_mbuf_alloc--;
fp->tx_mbuf_ptr[j] = NULL;
}
}
}
/* Check if we lost any mbufs in the process. */
DBRUNIF((fp->tx_mbuf_alloc), DBPRINT(sc, BXE_FATAL,
"%s(): Memory leak! Lost %d mbufs from fp[%02d] TX chain!\n",
__FUNCTION__, fp->tx_mbuf_alloc, fp->index));
}
DBEXIT(BXE_VERBOSE_RESET);
}
/*
* Initialize the transmit chain.
*
* Returns:
* None.
*/
static void
bxe_init_tx_chains(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i, j;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
/* Initialize transmit doorbell. */
fp->tx_db.data.header.header = DOORBELL_HDR_DB_TYPE;
fp->tx_db.data.zero_fill1 = 0;
fp->tx_db.data.prod = 0;
/* Initialize tranmsit producer/consumer indices. */
fp->tx_pkt_prod = fp->tx_pkt_cons = 0;
fp->tx_bd_prod = fp->tx_bd_cons = 0;
fp->tx_bd_used = 0;
/* Pointer to TX packet consumer in status block. */
fp->tx_pkt_cons_sb =
&fp->status_block->c_status_block.index_values[C_SB_ETH_TX_CQ_INDEX];
/* Soft TX counters. */
fp->tx_pkts = 0;
fp->tx_soft_errors = 0;
fp->tx_offload_frames_csum_ip = 0;
fp->tx_offload_frames_csum_tcp = 0;
fp->tx_offload_frames_csum_udp = 0;
fp->tx_offload_frames_tso = 0;
fp->tx_header_splits = 0;
fp->tx_encap_failures = 0;
fp->tx_hw_queue_full = 0;
fp->tx_hw_max_queue_depth = 0;
fp->tx_dma_mapping_failure = 0;
fp->tx_max_drbr_queue_depth = 0;
fp->tx_window_violation_std = 0;
fp->tx_window_violation_tso = 0;
fp->tx_unsupported_tso_request_ipv6 = 0;
fp->tx_unsupported_tso_request_not_tcp = 0;
fp->tx_chain_lost_mbuf = 0;
fp->tx_frame_deferred = 0;
fp->tx_queue_xoff = 0;
/* Clear all TX mbuf pointers. */
for (j = 0; j < TOTAL_TX_BD; j++) {
fp->tx_mbuf_ptr[j] = NULL;
}
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Initialize the slowpath ring.
*
* Returns:
* None.
*/
static void
bxe_init_sp_ring(struct bxe_softc *sc)
{
int func;
func = BP_FUNC(sc);
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
bzero((char *)sc->slowpath, BXE_SLOWPATH_SZ);
/* When the producer equals the consumer the chain is empty. */
sc->spq_left = MAX_SPQ_PENDING;
sc->spq_prod_idx = 0;
sc->dsb_sp_prod = BXE_SP_DSB_INDEX;
sc->spq_prod_bd = sc->spq;
sc->spq_last_bd = sc->spq_prod_bd + MAX_SP_DESC_CNT;
/* Tell the controller the address of the slowpath ring. */
REG_WR(sc, XSEM_REG_FAST_MEMORY + XSTORM_SPQ_PAGE_BASE_OFFSET(func),
U64_LO(sc->spq_dma.paddr));
REG_WR(sc, XSEM_REG_FAST_MEMORY + XSTORM_SPQ_PAGE_BASE_OFFSET(func) + 4,
U64_HI(sc->spq_dma.paddr));
REG_WR(sc, XSEM_REG_FAST_MEMORY + XSTORM_SPQ_PROD_OFFSET(func),
sc->spq_prod_idx);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Initialize STORM processor context.
*
* Returns:
* None.
*/
static void
bxe_init_context(struct bxe_softc *sc)
{
struct eth_context *context;
struct bxe_fastpath *fp;
uint8_t sb_id;
uint8_t cl_id;
int i;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
for (i = 0; i < sc->num_queues; i++) {
context = BXE_SP(sc, context[i].eth);
fp = &sc->fp[i];
sb_id = fp->sb_id;
cl_id = fp->cl_id;
/* Update the USTORM context. */
context->ustorm_st_context.common.sb_index_numbers =
BXE_RX_SB_INDEX_NUM;
context->ustorm_st_context.common.clientId = cl_id;
context->ustorm_st_context.common.status_block_id = sb_id;
/* Enable packet alignment/pad and statistics. */
context->ustorm_st_context.common.flags =
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT;
if (sc->stats_enable == TRUE)
context->ustorm_st_context.common.flags |=
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
context->ustorm_st_context.common.statistics_counter_id=cl_id;
/*
* Set packet alignment boundary.
* (Must be >= 4 (i.e. 16 bytes).)
*/
context->ustorm_st_context.common.mc_alignment_log_size = 8;
/* Set the size of the receive buffers. */
context->ustorm_st_context.common.bd_buff_size =
sc->mbuf_alloc_size;
/* Set the address of the receive chain base page. */
context->ustorm_st_context.common.bd_page_base_hi =
U64_HI(fp->rx_dma.paddr);
context->ustorm_st_context.common.bd_page_base_lo =
U64_LO(fp->rx_dma.paddr);
if (TPA_ENABLED(sc) && (fp->disable_tpa == FALSE)) {
/* Enable TPA and SGE chain support. */
context->ustorm_st_context.common.flags |=
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA;
/* Set the size of the SGE buffer. */
context->ustorm_st_context.common.sge_buff_size =
(uint16_t) (SGE_PAGE_SIZE * PAGES_PER_SGE);
/* Set the address of the SGE chain base page. */
context->ustorm_st_context.common.sge_page_base_hi =
U64_HI(fp->sg_dma.paddr);
context->ustorm_st_context.common.sge_page_base_lo =
U64_LO(fp->sg_dma.paddr);
DBPRINT(sc, BXE_VERBOSE_TPA, "%s(): MTU = %d\n",
__FUNCTION__, (int) sc->bxe_ifp->if_mtu);
/* Describe MTU to SGE alignment. */
context->ustorm_st_context.common.max_sges_for_packet =
SGE_PAGE_ALIGN(sc->bxe_ifp->if_mtu) >>
SGE_PAGE_SHIFT;
context->ustorm_st_context.common.max_sges_for_packet =
((context->ustorm_st_context.common.
max_sges_for_packet + PAGES_PER_SGE - 1) &
(~(PAGES_PER_SGE - 1))) >> PAGES_PER_SGE_SHIFT;
DBPRINT(sc, BXE_VERBOSE_TPA,
"%s(): max_sges_for_packet = %d\n", __FUNCTION__,
context->ustorm_st_context.common.max_sges_for_packet);
}
/* Update USTORM context. */
context->ustorm_ag_context.cdu_usage =
CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, i),
CDU_REGION_NUMBER_UCM_AG, ETH_CONNECTION_TYPE);
/* Update XSTORM context. */
context->xstorm_ag_context.cdu_reserved =
CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, i),
CDU_REGION_NUMBER_XCM_AG, ETH_CONNECTION_TYPE);
/* Set the address of the transmit chain base page. */
context->xstorm_st_context.tx_bd_page_base_hi =
U64_HI(fp->tx_dma.paddr);
context->xstorm_st_context.tx_bd_page_base_lo =
U64_LO(fp->tx_dma.paddr);
/* Enable XSTORM statistics. */
context->xstorm_st_context.statistics_data = (cl_id |
XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
/* Update CSTORM status block configuration. */
context->cstorm_st_context.sb_index_number =
C_SB_ETH_TX_CQ_INDEX;
context->cstorm_st_context.status_block_id = sb_id;
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Initialize indirection table.
*
* Returns:
* None.
*/
static void
bxe_init_ind_table(struct bxe_softc *sc)
{
int func, i;
func = BP_FUNC(sc);
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
if (sc->multi_mode == ETH_RSS_MODE_DISABLED)
return;
/* Initialize the indirection table. */
for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
REG_WR8(sc, BAR_TSTORM_INTMEM +
TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
sc->fp->cl_id + (i % sc->num_queues));
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Set client configuration.
*
* Returns:
* None.
*/
static void
bxe_set_client_config(struct bxe_softc *sc)
{
struct tstorm_eth_client_config tstorm_client = {0};
int i, port;
port = BP_PORT(sc);
DBENTER(BXE_VERBOSE_MISC);
tstorm_client.mtu = sc->bxe_ifp->if_mtu; /* ETHERMTU */
tstorm_client.config_flags =
(TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE |
TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE);
/* Unconditionally enable VLAN tag stripping. */
if (sc->rx_mode) {
tstorm_client.config_flags |=
TSTORM_ETH_CLIENT_CONFIG_VLAN_REM_ENABLE;
DBPRINT(sc, BXE_VERBOSE, "%s(): VLAN tag stripping enabled.\n",
__FUNCTION__);
}
/* Initialize the receive mode for each receive queue. */
for (i = 0; i < sc->num_queues; i++) {
tstorm_client.statistics_counter_id = sc->fp[i].cl_id;
REG_WR(sc, BAR_TSTORM_INTMEM +
TSTORM_CLIENT_CONFIG_OFFSET(port, sc->fp[i].cl_id),
((uint32_t *) &tstorm_client)[0]);
REG_WR(sc, BAR_TSTORM_INTMEM +
TSTORM_CLIENT_CONFIG_OFFSET(port, sc->fp[i].cl_id) + 4,
((uint32_t *) &tstorm_client)[1]);
}
DBEXIT(BXE_VERBOSE_MISC);
}
/*
* Set receive mode.
*
* Programs the MAC according to the type of unicast/broadcast/multicast
* packets it should receive.
*
* Returns:
* None.
*/
static void
bxe_set_storm_rx_mode(struct bxe_softc *sc)
{
struct tstorm_eth_mac_filter_config tstorm_mac_filter = {0};
uint32_t llh_mask;
int mode, mask;
int func, i , port;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
mode = sc->rx_mode;
mask = 1 << BP_L_ID(sc);
func = BP_FUNC(sc);
port = BP_PORT(sc);
/* All but management unicast packets should pass to the host as well */
llh_mask = NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST |
NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST |
NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN |
NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN;
/* Set the individual accept/drop flags based on the receive mode. */
switch (mode) {
case BXE_RX_MODE_NONE:
/* Drop everything. */
DBPRINT(sc, BXE_VERBOSE,
"%s(): Setting RX_MODE_NONE for function %d.\n",
__FUNCTION__, func);
tstorm_mac_filter.ucast_drop_all = mask;
tstorm_mac_filter.mcast_drop_all = mask;
tstorm_mac_filter.bcast_drop_all = mask;
break;
case BXE_RX_MODE_NORMAL:
/* Accept all broadcast frames. */
DBPRINT(sc, BXE_VERBOSE,
"%s(): Setting RX_MODE_NORMAL for function %d.\n",
__FUNCTION__, func);
tstorm_mac_filter.bcast_accept_all = mask;
break;
case BXE_RX_MODE_ALLMULTI:
/* Accept all broadcast and multicast frames. */
DBPRINT(sc, BXE_VERBOSE,
"%s(): Setting RX_MODE_ALLMULTI for function %d.\n",
__FUNCTION__, func);
tstorm_mac_filter.mcast_accept_all = mask;
tstorm_mac_filter.bcast_accept_all = mask;
break;
case BXE_RX_MODE_PROMISC:
/* Accept all frames (promiscuous mode). */
DBPRINT(sc, BXE_VERBOSE,
"%s(): Setting RX_MODE_PROMISC for function %d.\n",
__FUNCTION__, func);
tstorm_mac_filter.ucast_accept_all = mask;
tstorm_mac_filter.mcast_accept_all = mask;
tstorm_mac_filter.bcast_accept_all = mask;
llh_mask |= NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST;
break;
default:
BXE_PRINTF(
"%s(%d): Tried to set unknown receive mode (0x%08X)!\n",
__FILE__, __LINE__, mode);
}
REG_WR(sc, port ? NIG_REG_LLH1_BRB1_DRV_MASK :
NIG_REG_LLH0_BRB1_DRV_MASK, llh_mask);
/* Write the RX mode filter to the TSTORM. */
for (i = 0; i < sizeof(struct tstorm_eth_mac_filter_config) / 4; i++)
REG_WR(sc, BAR_TSTORM_INTMEM +
TSTORM_MAC_FILTER_CONFIG_OFFSET(func) + (i * 4),
((uint32_t *) &tstorm_mac_filter)[i]);
if (mode != BXE_RX_MODE_NONE)
bxe_set_client_config(sc);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Initialize common internal resources. (Applies to both ports and
* functions.)
*
* Returns:
* Nothing.
*/
static void
bxe_init_internal_common(struct bxe_softc *sc)
{
int i;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
/*
* Zero this manually as its initialization is currently not
* handled through block initialization.
*/
for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
REG_WR(sc, BAR_USTORM_INTMEM + USTORM_AGG_DATA_OFFSET + i * 4,
0);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Initialize port specific internal resources.
*
* Returns:
* Nothing.
*/
static void
bxe_init_internal_port(struct bxe_softc *sc)
{
int port = BP_PORT(sc);
port = BP_PORT(sc);
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Port %d internal initialization.\n", __FUNCTION__, port);
/*
* Each SDM timer tick is 4us. Configure host coalescing
* basic timer resolution (BTR) to 12us (3 * 4us).
*/
REG_WR(sc, BAR_CSTORM_INTMEM + CSTORM_HC_BTR_U_OFFSET(port), BXE_BTR);
REG_WR(sc, BAR_CSTORM_INTMEM + CSTORM_HC_BTR_C_OFFSET(port), BXE_BTR);
REG_WR(sc, BAR_TSTORM_INTMEM + TSTORM_HC_BTR_OFFSET(port), BXE_BTR);
REG_WR(sc, BAR_XSTORM_INTMEM + XSTORM_HC_BTR_OFFSET(port), BXE_BTR);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Initialize function specific internal resources.
*
* Returns:
* Nothing.
*/
static void
bxe_init_internal_func(struct bxe_softc *sc)
{
struct tstorm_eth_function_common_config tstorm_config = {0};
struct stats_indication_flags stats_flags = {0};
struct ustorm_eth_rx_pause_data_e1h rx_pause = {0};
struct bxe_fastpath *fp;
struct eth_rx_cqe_next_page *nextpg;
uint32_t offset, size;
uint16_t max_agg_size;
uint8_t cl_id;
int func, i, j, port;
port = BP_PORT(sc);
func = BP_FUNC(sc);
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Port %d, function %d internal initialization.\n",
__FUNCTION__, port, func);
/*
* Configure which fields the controller looks at when
* distributing incoming frames for RSS/multi-queue operation.
*/
if (sc->num_queues > 1) {
tstorm_config.config_flags = MULTI_FLAGS(sc);
tstorm_config.rss_result_mask = MULTI_MASK;
}
/* Enable TPA if needed */
if (TPA_ENABLED(sc))
tstorm_config.config_flags |=
TSTORM_ETH_FUNCTION_COMMON_CONFIG_ENABLE_TPA;
if (IS_E1HMF(sc))
tstorm_config.config_flags |=
TSTORM_ETH_FUNCTION_COMMON_CONFIG_E1HOV_IN_CAM;
tstorm_config.leading_client_id = BP_L_ID(sc);
REG_WR(sc, BAR_TSTORM_INTMEM +
TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(func),
(*(uint32_t *)&tstorm_config));
/* Don't receive anything until the link is up. */
sc->rx_mode = BXE_RX_MODE_NONE;
sc->rx_mode_cl_mask = (1 << BP_L_ID(sc));
bxe_set_storm_rx_mode(sc);
for (i = 0; i < sc->num_queues; i++) {
cl_id = sc->fp[i].cl_id;
/* Reset XSTORM per client statistics. */
size = sizeof(struct xstorm_per_client_stats) / 4;
offset = BAR_XSTORM_INTMEM +
XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cl_id);
for (j = 0; j < size; j++)
REG_WR(sc, offset +(j * 4), 0);
/* Reset TSTORM per client statistics. */
size = sizeof(struct tstorm_per_client_stats) / 4;
offset = BAR_TSTORM_INTMEM +
TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cl_id);
for (j = 0; j < size; j++)
REG_WR(sc, offset + (j * 4), 0);
/* Reset USTORM per client statistics. */
size = sizeof(struct ustorm_per_client_stats) / 4;
offset = BAR_USTORM_INTMEM +
USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cl_id);
for (j = 0; j < size; j++)
REG_WR(sc, offset + (j * 4), 0);
}
/* Initialize statistics related context. */
stats_flags.collect_eth = 1;
REG_WR(sc, BAR_XSTORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func),
((uint32_t *)&stats_flags)[0]);
REG_WR(sc, BAR_XSTORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func) + 4,
((uint32_t *)&stats_flags)[1]);
REG_WR(sc, BAR_TSTORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func),
((uint32_t *)&stats_flags)[0]);
REG_WR(sc, BAR_TSTORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func) + 4,
((uint32_t *)&stats_flags)[1]);
REG_WR(sc, BAR_USTORM_INTMEM + USTORM_STATS_FLAGS_OFFSET(func),
((uint32_t *)&stats_flags)[0]);
REG_WR(sc, BAR_USTORM_INTMEM + USTORM_STATS_FLAGS_OFFSET(func) + 4,
((uint32_t *)&stats_flags)[1]);
REG_WR(sc, BAR_CSTORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func),
((uint32_t *)&stats_flags)[0]);
REG_WR(sc, BAR_CSTORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func) + 4,
((uint32_t *)&stats_flags)[1]);
REG_WR(sc, BAR_XSTORM_INTMEM + XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
U64_LO(BXE_SP_MAPPING(sc, fw_stats)));
REG_WR(sc, BAR_XSTORM_INTMEM +
XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
U64_HI(BXE_SP_MAPPING(sc, fw_stats)));
REG_WR(sc, BAR_TSTORM_INTMEM + TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
U64_LO(BXE_SP_MAPPING(sc, fw_stats)));
REG_WR(sc, BAR_TSTORM_INTMEM +
TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
U64_HI(BXE_SP_MAPPING(sc, fw_stats)));
REG_WR(sc, BAR_USTORM_INTMEM + USTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
U64_LO(BXE_SP_MAPPING(sc, fw_stats)));
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
U64_HI(BXE_SP_MAPPING(sc, fw_stats)));
/* Additional initialization for 57711/57711E. */
if (CHIP_IS_E1H(sc)) {
REG_WR8(sc, BAR_XSTORM_INTMEM + XSTORM_FUNCTION_MODE_OFFSET,
IS_E1HMF(sc));
REG_WR8(sc, BAR_TSTORM_INTMEM + TSTORM_FUNCTION_MODE_OFFSET,
IS_E1HMF(sc));
REG_WR8(sc, BAR_CSTORM_INTMEM + CSTORM_FUNCTION_MODE_OFFSET,
IS_E1HMF(sc));
REG_WR8(sc, BAR_USTORM_INTMEM + USTORM_FUNCTION_MODE_OFFSET,
IS_E1HMF(sc));
/* Set the outer VLAN tag. */
REG_WR16(sc, BAR_XSTORM_INTMEM + XSTORM_E1HOV_OFFSET(func),
sc->e1hov);
}
/* Init completion queue mapping and TPA aggregation size. */
max_agg_size = min((uint32_t)(sc->mbuf_alloc_size +
(8 * BCM_PAGE_SIZE * PAGES_PER_SGE)), (uint32_t)0xffff);
DBPRINT(sc, BXE_VERBOSE_TPA, "%s(): max_agg_size = 0x%08X\n",
__FUNCTION__, max_agg_size);
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
nextpg = (struct eth_rx_cqe_next_page *)
&fp->rcq_chain[USABLE_RCQ_ENTRIES_PER_PAGE];
/* Program the completion queue address. */
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_CQE_PAGE_BASE_OFFSET(port, fp->cl_id),
U64_LO(fp->rcq_dma.paddr));
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_CQE_PAGE_BASE_OFFSET(port, fp->cl_id) + 4,
U64_HI(fp->rcq_dma.paddr));
/* Program the first CQ next page address. */
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_CQE_PAGE_NEXT_OFFSET(port, fp->cl_id),
nextpg->addr_lo);
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_CQE_PAGE_NEXT_OFFSET(port, fp->cl_id) + 4,
nextpg->addr_hi);
/* Set the maximum TPA aggregation size. */
REG_WR16(sc, BAR_USTORM_INTMEM +
USTORM_MAX_AGG_SIZE_OFFSET(port, fp->cl_id),
max_agg_size);
}
/* Configure lossless flow control. */
if (CHIP_IS_E1H(sc)) {
rx_pause.bd_thr_low = 250;
rx_pause.cqe_thr_low = 250;
rx_pause.cos = 1;
rx_pause.sge_thr_low = 0;
rx_pause.bd_thr_high = 350;
rx_pause.cqe_thr_high = 350;
rx_pause.sge_thr_high = 0;
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
if (fp->disable_tpa == FALSE) {
rx_pause.sge_thr_low = 150;
rx_pause.sge_thr_high = 250;
}
offset = BAR_USTORM_INTMEM +
USTORM_ETH_RING_PAUSE_DATA_OFFSET(port, fp->cl_id);
for (j = 0; j <
sizeof(struct ustorm_eth_rx_pause_data_e1h) / 4;
j++)
REG_WR(sc, offset + (j * 4),
((uint32_t *)&rx_pause)[j]);
}
}
memset(&(sc->cmng), 0, sizeof(struct cmng_struct_per_port));
if (IS_E1HMF(sc)) {
/*
* During init there is no active link.
* Until link is up, assume link rate @ 10Gbps
*/
bxe_read_mf_cfg(sc);
if (!sc->vn_wsum)
DBPRINT(sc, BXE_VERBOSE_MISC,
"%s(): All MIN values are zeroes, "
"fairness will be disabled.\n", __FUNCTION__);
}
/* Store it to internal memory */
if (sc->port.pmf) {
for (i = 0; i < sizeof(struct cmng_struct_per_port) / 4; i++)
REG_WR(sc, BAR_XSTORM_INTMEM +
XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) + i * 4,
((uint32_t *)(&sc->cmng))[i]);
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Initialize internal resources.
*
* Returns:
* Nothing.
*/
static void
bxe_init_internal(struct bxe_softc *sc, uint32_t load_code)
{
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
switch (load_code) {
case FW_MSG_CODE_DRV_LOAD_COMMON:
bxe_init_internal_common(sc);
/* FALLTHROUGH */
case FW_MSG_CODE_DRV_LOAD_PORT:
bxe_init_internal_port(sc);
/* FALLTHROUGH */
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
bxe_init_internal_func(sc);
break;
default:
BXE_PRINTF(
"%s(%d): Unknown load_code (0x%08X) from MCP!\n",
__FILE__, __LINE__, load_code);
break;
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Perform driver instance specific initialization.
*
* Returns:
* None
*/
static int
bxe_init_nic(struct bxe_softc *sc, uint32_t load_code)
{
struct bxe_fastpath *fp;
int i, rc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
/* Intialize fastpath structures and the status block. */
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
fp->disable_tpa = TRUE;
bzero((char *)fp->status_block, BXE_STATUS_BLK_SZ);
fp->fp_u_idx = 0;
fp->fp_c_idx = 0;
/* Set a pointer back to the driver instance. */
fp->sc = sc;
/* Set the fastpath starting state as closed. */
fp->state = BXE_FP_STATE_CLOSED;
/* Self-reference to this fastpath's instance. */
fp->index = i;
/* Set the client ID beginning with the leading id. */
fp->cl_id = BP_L_ID(sc) + i;
/* Set the status block ID for this fastpath instance. */
fp->sb_id = fp->cl_id;
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): fp[%02d]: cl_id = %d, sb_id = %d\n",
__FUNCTION__, fp->index, fp->cl_id, fp->sb_id);
/* Initialize the fastpath status block. */
bxe_init_sb(sc, fp->status_block, fp->sb_dma.paddr,
fp->sb_id);
bxe_update_fpsb_idx(fp);
}
rmb();
bzero((char *)sc->def_sb, BXE_DEF_STATUS_BLK_SZ);
/* Initialize the Default Status Block. */
bxe_init_def_sb(sc, sc->def_sb, sc->def_sb_dma.paddr, DEF_SB_ID);
bxe_update_dsb_idx(sc);
/* Initialize the coalescence parameters. */
bxe_update_coalesce(sc);
/* Initialize receive chains. */
rc = bxe_init_rx_chains(sc);
if (rc != 0) {
goto bxe_init_nic_exit;
}
/* Initialize the Transmit BD Chain. */
bxe_init_tx_chains(sc);
/* Initialize the Slow Path Chain. */
bxe_init_sp_ring(sc);
/* Initialize STORM processor context/configuration. */
bxe_init_context(sc);
/* Initialize the Context. */
bxe_init_internal(sc, load_code);
/* Enable indirection table for multi-queue operation. */
bxe_init_ind_table(sc);
mb();
/* Disable the interrupts from device until init is complete.*/
bxe_int_disable(sc);
bxe_init_nic_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Send a loopback packet through the Network Interface Glue (NIG) block.
*
* Returns:
* None.
*/
static void
bxe_lb_pckt(struct bxe_softc *sc)
{
#ifdef BXE_USE_DMAE
uint32_t wb_write[3];
#endif
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
/* Ethernet source and destination addresses. */
#ifdef BXE_USE_DMAE
wb_write[0] = 0x55555555;
wb_write[1] = 0x55555555;
wb_write[2] = 0x20; /* SOP */
REG_WR_DMAE(sc, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
#else
REG_WR_IND(sc, NIG_REG_DEBUG_PACKET_LB, 0x55555555);
REG_WR_IND(sc, NIG_REG_DEBUG_PACKET_LB + 4, 0x55555555);
REG_WR_IND(sc, NIG_REG_DEBUG_PACKET_LB + 8, 0x20);
#endif
/* NON-IP protocol. */
#ifdef BXE_USE_DMAE
wb_write[0] = 0x09000000;
wb_write[1] = 0x55555555;
wb_write[2] = 0x10; /* EOP */
REG_WR_DMAE(sc, NIG_REG_DEBUG_PACKET_LB, wb_write, 3);
#else
REG_WR_IND(sc, NIG_REG_DEBUG_PACKET_LB, 0x09000000);
REG_WR_IND(sc, NIG_REG_DEBUG_PACKET_LB + 4, 0x55555555);
REG_WR_IND(sc, NIG_REG_DEBUG_PACKET_LB + 8, 0x10);
#endif
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Perform an internal memory test.
*
* Some internal memories are not accessible through the PCIe interface so
* we send some debug packets for the test.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_int_mem_test(struct bxe_softc *sc)
{
uint32_t val;
int count, i, rc;
rc = 0;
val = 0;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
/* Perform a single debug packet test. */
/* Disable inputs of parser neighbor blocks. */
REG_WR(sc, TSDM_REG_ENABLE_IN1, 0x0);
REG_WR(sc, TCM_REG_PRS_IFEN, 0x0);
REG_WR(sc, CFC_REG_DEBUG0, 0x1);
REG_WR(sc, NIG_REG_PRS_REQ_IN_EN, 0x0);
/* Write 0 to parser credits for CFC search request. */
REG_WR(sc, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
/* Send an Ethernet packet. */
bxe_lb_pckt(sc);
/* Wait until NIG register shows 1 packet of size 0x10. */
count = 1000;
while (count) {
bxe_read_dmae(sc, NIG_REG_STAT2_BRB_OCTET, 2);
val = *BXE_SP(sc, wb_data[0]);
if (val == 0x10)
break;
DELAY(10000);
count--;
}
if (val != 0x10) {
DBPRINT(sc, BXE_FATAL,
"%s(): NIG loopback test 1 timeout (val = 0x%08X)!\n",
__FUNCTION__, val);
rc = 1;
goto bxe_int_mem_test_exit;
}
/* Wait until PRS register shows 1 packet */
count = 1000;
while (count) {
val = REG_RD(sc, PRS_REG_NUM_OF_PACKETS);
if (val == 1)
break;
DELAY(10000);
count--;
}
if (val != 0x1) {
DBPRINT(sc, BXE_FATAL,
"%s(): PRS loopback test 1 timeout (val = 0x%08X)!\n",
__FUNCTION__, val);
rc = 2;
goto bxe_int_mem_test_exit;
}
/* Reset and init BRB, PRS. */
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x3);
DELAY(50000);
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x3);
DELAY(50000);
bxe_init_block(sc, BRB1_BLOCK, COMMON_STAGE);
bxe_init_block(sc, PRS_BLOCK, COMMON_STAGE);
/* Perform the test again, this time with 10 packets. */
/* Disable inputs of parser neighbor blocks. */
REG_WR(sc, TSDM_REG_ENABLE_IN1, 0x0);
REG_WR(sc, TCM_REG_PRS_IFEN, 0x0);
REG_WR(sc, CFC_REG_DEBUG0, 0x1);
REG_WR(sc, NIG_REG_PRS_REQ_IN_EN, 0x0);
/* Write 0 to parser credits for CFC search request. */
REG_WR(sc, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
/* Send 10 Ethernet packets. */
for (i = 0; i < 10; i++)
bxe_lb_pckt(sc);
/* Wait until NIG shows 10 + 1 packets of size 11 * 0x10 = 0xb0. */
count = 1000;
while (count) {
bxe_read_dmae(sc, NIG_REG_STAT2_BRB_OCTET, 2);
val = *BXE_SP(sc, wb_data[0]);
if (val == 0xb0)
break;
DELAY(10000);
count--;
}
if (val != 0xb0) {
DBPRINT(sc, BXE_FATAL,
"%s(): NIG loopback test 2 timeout (val = 0x%08X)!\n",
__FUNCTION__, val);
rc = 3;
goto bxe_int_mem_test_exit;
}
/* Wait until PRS register shows 2 packets. */
val = REG_RD(sc, PRS_REG_NUM_OF_PACKETS);
if (val != 2) {
DBPRINT(sc, BXE_FATAL,
"%s(): PRS loopback test 2 timeout (val = 0x%x)!\n",
__FUNCTION__, val);
rc = 4;
goto bxe_int_mem_test_exit;
}
/* Write 1 to parser credits for CFC search request. */
REG_WR(sc, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x1);
/* Wait until PRS register shows 3 packets. */
DELAY(10000);
/* Wait until NIG register shows 1 packet of size 0x10. */
val = REG_RD(sc, PRS_REG_NUM_OF_PACKETS);
if (val != 3) {
DBPRINT(sc, BXE_FATAL,
"%s(): PRS loopback test 3 timeout (val = 0x%08X)!\n",
__FUNCTION__, val);
rc = 5;
goto bxe_int_mem_test_exit;
}
/* Clear NIG end-of-packet FIFO. */
for (i = 0; i < 11; i++)
REG_RD(sc, NIG_REG_INGRESS_EOP_LB_FIFO);
val = REG_RD(sc, NIG_REG_INGRESS_EOP_LB_EMPTY);
if (val != 1) {
DBPRINT(sc, BXE_INFO, "%s(): Unable to clear NIG!\n",
__FUNCTION__);
rc = 6;
goto bxe_int_mem_test_exit;
}
/* Reset and init BRB, PRS, NIG. */
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x03);
DELAY(50000);
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
DELAY(50000);
bxe_init_block(sc, BRB1_BLOCK, COMMON_STAGE);
bxe_init_block(sc, PRS_BLOCK, COMMON_STAGE);
/* Set NIC mode. */
REG_WR(sc, PRS_REG_NIC_MODE, 1);
/* Enable inputs of parser neighbor blocks. */
REG_WR(sc, TSDM_REG_ENABLE_IN1, 0x7fffffff);
REG_WR(sc, TCM_REG_PRS_IFEN, 0x1);
REG_WR(sc, CFC_REG_DEBUG0, 0x0);
REG_WR(sc, NIG_REG_PRS_REQ_IN_EN, 0x1);
bxe_int_mem_test_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Enable attentions from various blocks.
*
* Returns:
* None.
*/
static void
bxe_enable_blocks_attention(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0);
REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
REG_WR(sc, QM_REG_QM_INT_MASK, 0);
REG_WR(sc, TM_REG_TM_INT_MASK, 0);
REG_WR(sc, XSDM_REG_XSDM_INT_MASK_0, 0);
REG_WR(sc, XSDM_REG_XSDM_INT_MASK_1, 0);
REG_WR(sc, XCM_REG_XCM_INT_MASK, 0);
REG_WR(sc, USDM_REG_USDM_INT_MASK_0, 0);
REG_WR(sc, USDM_REG_USDM_INT_MASK_1, 0);
REG_WR(sc, UCM_REG_UCM_INT_MASK, 0);
REG_WR(sc, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
REG_WR(sc, CSDM_REG_CSDM_INT_MASK_0, 0);
REG_WR(sc, CSDM_REG_CSDM_INT_MASK_1, 0);
REG_WR(sc, CCM_REG_CCM_INT_MASK, 0);
REG_WR(sc, PXP2_REG_PXP2_INT_MASK_0, 0x480000);
REG_WR(sc, TSDM_REG_TSDM_INT_MASK_0, 0);
REG_WR(sc, TSDM_REG_TSDM_INT_MASK_1, 0);
REG_WR(sc, TCM_REG_TCM_INT_MASK, 0);
REG_WR(sc, CDU_REG_CDU_INT_MASK, 0);
REG_WR(sc, DMAE_REG_DMAE_INT_MASK, 0);
REG_WR(sc, PBF_REG_PBF_INT_MASK, 0X18);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* PXP Arbiter
*/
/*
* This code configures the PCI read/write arbiter
* which implements a weighted round robin
* between the virtual queues in the chip.
*
* The values were derived for each PCI max payload and max request size.
* since max payload and max request size are only known at run time,
* this is done as a separate init stage.
*/
#define NUM_WR_Q 13
#define NUM_RD_Q 29
#define MAX_RD_ORD 3
#define MAX_WR_ORD 2
/* Configuration for one arbiter queue. */
struct arb_line {
int l;
int add;
int ubound;
};
/* Derived configuration for each read queue for each max request size. */
static const struct arb_line read_arb_data[NUM_RD_Q][MAX_RD_ORD + 1] = {
/* 1 */ { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} },
{ {4, 8, 4}, {4, 8, 4}, {4, 8, 4}, {4, 8, 4} },
{ {4, 3, 3}, {4, 3, 3}, {4, 3, 3}, {4, 3, 3} },
{ {8, 3, 6}, {16, 3, 11}, {16, 3, 11}, {16, 3, 11} },
{ {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
/* 10 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 64, 6}, {16, 64, 11}, {32, 64, 21}, {32, 64, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
/* 20 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
{ {8, 64, 25}, {16, 64, 41}, {32, 64, 81}, {64, 64, 120} }
};
/* Derived configuration for each write queue for each max request size. */
static const struct arb_line write_arb_data[NUM_WR_Q][MAX_WR_ORD + 1] = {
/* 1 */ { {4, 6, 3}, {4, 6, 3}, {4, 6, 3} },
{ {4, 2, 3}, {4, 2, 3}, {4, 2, 3} },
{ {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
{ {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
{ {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
{ {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
{ {8, 64, 25}, {16, 64, 25}, {32, 64, 25} },
{ {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
{ {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
/* 10 */{ {8, 9, 6}, {16, 9, 11}, {32, 9, 21} },
{ {8, 47, 19}, {16, 47, 19}, {32, 47, 21} },
{ {8, 9, 6}, {16, 9, 11}, {16, 9, 11} },
{ {8, 64, 25}, {16, 64, 41}, {32, 64, 81} }
};
/* Register addresses for read queues. */
static const struct arb_line read_arb_addr[NUM_RD_Q-1] = {
/* 1 */ {PXP2_REG_RQ_BW_RD_L0, PXP2_REG_RQ_BW_RD_ADD0,
PXP2_REG_RQ_BW_RD_UBOUND0},
{PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,
PXP2_REG_PSWRQ_BW_UB1},
{PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2,
PXP2_REG_PSWRQ_BW_UB2},
{PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3,
PXP2_REG_PSWRQ_BW_UB3},
{PXP2_REG_RQ_BW_RD_L4, PXP2_REG_RQ_BW_RD_ADD4,
PXP2_REG_RQ_BW_RD_UBOUND4},
{PXP2_REG_RQ_BW_RD_L5, PXP2_REG_RQ_BW_RD_ADD5,
PXP2_REG_RQ_BW_RD_UBOUND5},
{PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6,
PXP2_REG_PSWRQ_BW_UB6},
{PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7,
PXP2_REG_PSWRQ_BW_UB7},
{PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8,
PXP2_REG_PSWRQ_BW_UB8},
/* 10 */{PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9,
PXP2_REG_PSWRQ_BW_UB9},
{PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10,
PXP2_REG_PSWRQ_BW_UB10},
{PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11,
PXP2_REG_PSWRQ_BW_UB11},
{PXP2_REG_RQ_BW_RD_L12, PXP2_REG_RQ_BW_RD_ADD12,
PXP2_REG_RQ_BW_RD_UBOUND12},
{PXP2_REG_RQ_BW_RD_L13, PXP2_REG_RQ_BW_RD_ADD13,
PXP2_REG_RQ_BW_RD_UBOUND13},
{PXP2_REG_RQ_BW_RD_L14, PXP2_REG_RQ_BW_RD_ADD14,
PXP2_REG_RQ_BW_RD_UBOUND14},
{PXP2_REG_RQ_BW_RD_L15, PXP2_REG_RQ_BW_RD_ADD15,
PXP2_REG_RQ_BW_RD_UBOUND15},
{PXP2_REG_RQ_BW_RD_L16, PXP2_REG_RQ_BW_RD_ADD16,
PXP2_REG_RQ_BW_RD_UBOUND16},
{PXP2_REG_RQ_BW_RD_L17, PXP2_REG_RQ_BW_RD_ADD17,
PXP2_REG_RQ_BW_RD_UBOUND17},
{PXP2_REG_RQ_BW_RD_L18, PXP2_REG_RQ_BW_RD_ADD18,
PXP2_REG_RQ_BW_RD_UBOUND18},
/* 20 */{PXP2_REG_RQ_BW_RD_L19, PXP2_REG_RQ_BW_RD_ADD19,
PXP2_REG_RQ_BW_RD_UBOUND19},
{PXP2_REG_RQ_BW_RD_L20, PXP2_REG_RQ_BW_RD_ADD20,
PXP2_REG_RQ_BW_RD_UBOUND20},
{PXP2_REG_RQ_BW_RD_L22, PXP2_REG_RQ_BW_RD_ADD22,
PXP2_REG_RQ_BW_RD_UBOUND22},
{PXP2_REG_RQ_BW_RD_L23, PXP2_REG_RQ_BW_RD_ADD23,
PXP2_REG_RQ_BW_RD_UBOUND23},
{PXP2_REG_RQ_BW_RD_L24, PXP2_REG_RQ_BW_RD_ADD24,
PXP2_REG_RQ_BW_RD_UBOUND24},
{PXP2_REG_RQ_BW_RD_L25, PXP2_REG_RQ_BW_RD_ADD25,
PXP2_REG_RQ_BW_RD_UBOUND25},
{PXP2_REG_RQ_BW_RD_L26, PXP2_REG_RQ_BW_RD_ADD26,
PXP2_REG_RQ_BW_RD_UBOUND26},
{PXP2_REG_RQ_BW_RD_L27, PXP2_REG_RQ_BW_RD_ADD27,
PXP2_REG_RQ_BW_RD_UBOUND27},
{PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28,
PXP2_REG_PSWRQ_BW_UB28}
};
/* Register addresses for write queues. */
static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
/* 1 */ {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,
PXP2_REG_PSWRQ_BW_UB1},
{PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2,
PXP2_REG_PSWRQ_BW_UB2},
{PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3,
PXP2_REG_PSWRQ_BW_UB3},
{PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6,
PXP2_REG_PSWRQ_BW_UB6},
{PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7,
PXP2_REG_PSWRQ_BW_UB7},
{PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8,
PXP2_REG_PSWRQ_BW_UB8},
{PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9,
PXP2_REG_PSWRQ_BW_UB9},
{PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10,
PXP2_REG_PSWRQ_BW_UB10},
{PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11,
PXP2_REG_PSWRQ_BW_UB11},
/* 10 */{PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28,
PXP2_REG_PSWRQ_BW_UB28},
{PXP2_REG_RQ_BW_WR_L29, PXP2_REG_RQ_BW_WR_ADD29,
PXP2_REG_RQ_BW_WR_UBOUND29},
{PXP2_REG_RQ_BW_WR_L30, PXP2_REG_RQ_BW_WR_ADD30,
PXP2_REG_RQ_BW_WR_UBOUND30}
};
static void
bxe_init_pxp_arb(struct bxe_softc *sc, int r_order, int w_order)
{
uint32_t val, i;
if (r_order > MAX_RD_ORD) {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Read order of %d order adjusted to %d\n",
__FUNCTION__, r_order, MAX_RD_ORD);
r_order = MAX_RD_ORD;
}
if (w_order > MAX_WR_ORD) {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Write order of %d order adjusted to %d\n",
__FUNCTION__, w_order, MAX_WR_ORD);
w_order = MAX_WR_ORD;
}
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Read order %d, write order %d\n",
__FUNCTION__, r_order, w_order);
for (i = 0; i < NUM_RD_Q - 1; i++) {
REG_WR(sc, read_arb_addr[i].l,
read_arb_data[i][r_order].l);
REG_WR(sc, read_arb_addr[i].add,
read_arb_data[i][r_order].add);
REG_WR(sc, read_arb_addr[i].ubound,
read_arb_data[i][r_order].ubound);
}
for (i = 0; i < NUM_WR_Q - 1; i++) {
if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
(write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
REG_WR(sc, write_arb_addr[i].l,
write_arb_data[i][w_order].l);
REG_WR(sc, write_arb_addr[i].add,
write_arb_data[i][w_order].add);
REG_WR(sc, write_arb_addr[i].ubound,
write_arb_data[i][w_order].ubound);
} else {
val = REG_RD(sc, write_arb_addr[i].l);
REG_WR(sc, write_arb_addr[i].l, val |
(write_arb_data[i][w_order].l << 10));
val = REG_RD(sc, write_arb_addr[i].add);
REG_WR(sc, write_arb_addr[i].add, val |
(write_arb_data[i][w_order].add << 10));
val = REG_RD(sc, write_arb_addr[i].ubound);
REG_WR(sc, write_arb_addr[i].ubound, val |
(write_arb_data[i][w_order].ubound << 7));
}
}
val = write_arb_data[NUM_WR_Q - 1][w_order].add;
val += write_arb_data[NUM_WR_Q - 1][w_order].ubound << 10;
val += write_arb_data[NUM_WR_Q - 1][w_order].l << 17;
REG_WR(sc, PXP2_REG_PSWRQ_BW_RD, val);
val = read_arb_data[NUM_RD_Q - 1][r_order].add;
val += read_arb_data[NUM_RD_Q - 1][r_order].ubound << 10;
val += read_arb_data[NUM_RD_Q - 1][r_order].l << 17;
REG_WR(sc, PXP2_REG_PSWRQ_BW_WR, val);
REG_WR(sc, PXP2_REG_RQ_WR_MBS0, w_order);
REG_WR(sc, PXP2_REG_RQ_WR_MBS1, w_order);
REG_WR(sc, PXP2_REG_RQ_RD_MBS0, r_order);
REG_WR(sc, PXP2_REG_RQ_RD_MBS1, r_order);
if (r_order == MAX_RD_ORD)
REG_WR(sc, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
REG_WR(sc, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
if (CHIP_IS_E1H(sc)) {
/* MPS w_order optimal TH presently TH
* 128 0 0 2
* 256 1 1 3
* >=512 2 2 3
*/
val = ((w_order == 0) ? 2 : 3);
REG_WR(sc, PXP2_REG_WR_HC_MPS, val);
REG_WR(sc, PXP2_REG_WR_USDM_MPS, val);
REG_WR(sc, PXP2_REG_WR_CSDM_MPS, val);
REG_WR(sc, PXP2_REG_WR_TSDM_MPS, val);
REG_WR(sc, PXP2_REG_WR_XSDM_MPS, val);
REG_WR(sc, PXP2_REG_WR_QM_MPS, val);
REG_WR(sc, PXP2_REG_WR_TM_MPS, val);
REG_WR(sc, PXP2_REG_WR_SRC_MPS, val);
REG_WR(sc, PXP2_REG_WR_DBG_MPS, val);
REG_WR(sc, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
REG_WR(sc, PXP2_REG_WR_CDU_MPS, val);
}
}
static void
bxe_init_pxp(struct bxe_softc *sc)
{
uint16_t devctl;
int r_order, w_order;
devctl = pci_read_config(sc->dev,
sc->pcie_cap + PCI_EXP_DEVCTL, 2);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Read 0x%x from devctl\n", __FUNCTION__, devctl);
w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
if (sc->mrrs == -1)
r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
else {
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Force MRRS read order to %d\n",
__FUNCTION__, sc->mrrs);
r_order = sc->mrrs;
}
bxe_init_pxp_arb(sc, r_order, w_order);
}
static void
bxe_setup_fan_failure_detection(struct bxe_softc *sc)
{
uint32_t phy_type, val;
int is_required, port;
is_required = 0;
if (NOMCP(sc))
return;
val = SHMEM_RD(sc, dev_info.shared_hw_config.config2) &
SHARED_HW_CFG_FAN_FAILURE_MASK;
if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED)
is_required = 1;
/*
* The fan failure mechanism is usually related to the PHY type since
* the power consumption of the board is affected by the PHY. Currently,
* fan is required for most designs with SFX7101, BCM8727 and BCM8481.
*/
else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE)
for (port = PORT_0; port < PORT_MAX; port++) {
phy_type = SHMEM_RD(sc,
dev_info.port_hw_config[port].external_phy_config) &
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
is_required |=
((phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) ||
(phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) ||
(phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481));
}
if (is_required == 0)
return;
/* Fan failure is indicated by SPIO 5. */
bxe_set_spio(sc, MISC_REGISTERS_SPIO_5, MISC_REGISTERS_SPIO_INPUT_HI_Z);
/* Set to active low mode. */
val = REG_RD(sc, MISC_REG_SPIO_INT);
val |= ((1 << MISC_REGISTERS_SPIO_5) <<
MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
REG_WR(sc, MISC_REG_SPIO_INT, val);
/* Enable interrupt to signal the IGU. */
val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
val |= (1 << MISC_REGISTERS_SPIO_5);
REG_WR(sc, MISC_REG_SPIO_EVENT_EN, val);
}
/*
* Common initialization.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_init_common(struct bxe_softc *sc)
{
uint32_t val;
int i, rc;
rc = 0;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
/* Reset all blocks within the chip except the BMAC. */
bxe_reset_common(sc);
DELAY(30000);
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
DELAY(30000);
bxe_init_block(sc, MISC_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1H(sc))
REG_WR(sc, MISC_REG_E1HMF_MODE, IS_E1HMF(sc));
REG_WR(sc, MISC_REG_LCPLL_CTRL_REG_2, 0x100);
DELAY(30000);
REG_WR(sc, MISC_REG_LCPLL_CTRL_REG_2, 0x0);
bxe_init_block(sc, PXP_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1(sc)) {
/*
* Enable HW interrupt from PXP on USDM overflow
* bit 16 on INT_MASK_0.
*/
REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
}
bxe_init_block(sc, PXP2_BLOCK, COMMON_STAGE);
bxe_init_pxp(sc);
#ifdef __BIG_ENDIAN
REG_WR(sc, PXP2_REG_RQ_QM_ENDIAN_M, 1);
REG_WR(sc, PXP2_REG_RQ_TM_ENDIAN_M, 1);
REG_WR(sc, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
REG_WR(sc, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
REG_WR(sc, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
/* Make sure this value is 0. */
REG_WR(sc, PXP2_REG_RQ_HC_ENDIAN_M, 0);
REG_WR(sc, PXP2_REG_RD_QM_SWAP_MODE, 1);
REG_WR(sc, PXP2_REG_RD_TM_SWAP_MODE, 1);
REG_WR(sc, PXP2_REG_RD_SRC_SWAP_MODE, 1);
REG_WR(sc, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
#endif
REG_WR(sc, PXP2_REG_RQ_CDU_P_SIZE, 2);
/* Let the HW do it's magic ... */
DELAY(100000);
/* Finish the PXP initialization. */
val = REG_RD(sc, PXP2_REG_RQ_CFG_DONE);
if (val != 1) {
BXE_PRINTF("%s(%d): PXP2 CFG failed!\n", __FILE__, __LINE__);
rc = EBUSY;
goto bxe_init_common_exit;
}
val = REG_RD(sc, PXP2_REG_RD_INIT_DONE);
if (val != 1) {
BXE_PRINTF("%s(%d): PXP2 RD_INIT failed!\n", __FILE__,
__LINE__);
rc = EBUSY;
goto bxe_init_common_exit;
}
REG_WR(sc, PXP2_REG_RQ_DISABLE_INPUTS, 0);
REG_WR(sc, PXP2_REG_RD_DISABLE_INPUTS, 0);
bxe_init_block(sc, DMAE_BLOCK, COMMON_STAGE);
sc->dmae_ready = 1;
bxe_init_fill(sc, TSEM_REG_PRAM, 0, 8);
bxe_init_block(sc, TCM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, UCM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, CCM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, XCM_BLOCK, COMMON_STAGE);
bxe_read_dmae(sc, XSEM_REG_PASSIVE_BUFFER, 3);
bxe_read_dmae(sc, CSEM_REG_PASSIVE_BUFFER, 3);
bxe_read_dmae(sc, TSEM_REG_PASSIVE_BUFFER, 3);
bxe_read_dmae(sc, USEM_REG_PASSIVE_BUFFER, 3);
bxe_init_block(sc, QM_BLOCK, COMMON_STAGE);
/* Soft reset pulse. */
REG_WR(sc, QM_REG_SOFT_RESET, 1);
REG_WR(sc, QM_REG_SOFT_RESET, 0);
bxe_init_block(sc, DQ_BLOCK, COMMON_STAGE);
REG_WR(sc, DORQ_REG_DPM_CID_OFST, BCM_PAGE_SHIFT);
REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
bxe_init_block(sc, BRB1_BLOCK, COMMON_STAGE);
bxe_init_block(sc, PRS_BLOCK, COMMON_STAGE);
REG_WR(sc, PRS_REG_A_PRSU_20, 0xf);
if (CHIP_IS_E1H(sc))
REG_WR(sc, PRS_REG_E1HOV_MODE, IS_E1HMF(sc));
bxe_init_block(sc, TSDM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, CSDM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, USDM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, XSDM_BLOCK, COMMON_STAGE);
/* Clear STORM processor memory. */
bxe_init_fill(sc, TSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(sc));
bxe_init_fill(sc, USEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(sc));
bxe_init_fill(sc, CSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(sc));
bxe_init_fill(sc, XSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(sc));
bxe_init_block(sc, TSEM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, USEM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, CSEM_BLOCK, COMMON_STAGE);
bxe_init_block(sc, XSEM_BLOCK, COMMON_STAGE);
/* Sync semi rtc. */
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x80000000);
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x80000000);
bxe_init_block(sc, UPB_BLOCK, COMMON_STAGE);
bxe_init_block(sc, XPB_BLOCK, COMMON_STAGE);
bxe_init_block(sc, PBF_BLOCK, COMMON_STAGE);
REG_WR(sc, SRC_REG_SOFT_RST, 1);
/* Setup RSS/multi-queue hasking keys. */
for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4)
REG_WR(sc, i, 0xc0cac01a);
bxe_init_block(sc, SRCH_BLOCK, COMMON_STAGE);
REG_WR(sc, SRC_REG_SOFT_RST, 0);
/* Make sure the cdu_context structure has the right size. */
if (sizeof(union cdu_context) != 1024) {
BXE_PRINTF("%s(%d): Invalid size for context (%ld != 1024)!\n",
__FILE__, __LINE__, (long)sizeof(union cdu_context));
rc = EBUSY;
goto bxe_init_common_exit;
}
bxe_init_block(sc, CDU_BLOCK, COMMON_STAGE);
/*
* val = (num_context_in_page << 24) +
* (context_waste_size << 12) +
* context_line_size.
*/
val = (4 << 24) + (0 << 12) + 1024;
REG_WR(sc, CDU_REG_CDU_GLOBAL_PARAMS, val);
bxe_init_block(sc, CFC_BLOCK, COMMON_STAGE);
REG_WR(sc, CFC_REG_INIT_REG, 0x7FF);
/* Enable context validation interrupt from CFC. */
REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
/* Set the thresholds to prevent CFC/CDU race. */
REG_WR(sc, CFC_REG_DEBUG0, 0x20020000);
bxe_init_block(sc, HC_BLOCK, COMMON_STAGE);
bxe_init_block(sc, MISC_AEU_BLOCK, COMMON_STAGE);
bxe_init_block(sc, PXPCS_BLOCK, COMMON_STAGE);
/* Clear PCIe block debug status bits. */
REG_WR(sc, 0x2814, 0xffffffff);
REG_WR(sc, 0x3820, 0xffffffff);
bxe_init_block(sc, EMAC0_BLOCK, COMMON_STAGE);
bxe_init_block(sc, EMAC1_BLOCK, COMMON_STAGE);
bxe_init_block(sc, DBU_BLOCK, COMMON_STAGE);
bxe_init_block(sc, DBG_BLOCK, COMMON_STAGE);
bxe_init_block(sc, NIG_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1H(sc)) {
REG_WR(sc, NIG_REG_LLH_MF_MODE, IS_E1HMF(sc));
REG_WR(sc, NIG_REG_LLH_E1HOV_MODE, IS_E1HOV(sc));
}
/* Finish CFC initialization. */
val = bxe_reg_poll(sc, CFC_REG_LL_INIT_DONE, 1, 100, 10);
if (val != 1) {
BXE_PRINTF("%s(%d): CFC LL_INIT failed!\n",
__FILE__, __LINE__);
rc = EBUSY;
goto bxe_init_common_exit;
}
val = bxe_reg_poll(sc, CFC_REG_AC_INIT_DONE, 1, 100, 10);
if (val != 1) {
BXE_PRINTF("%s(%d): CFC AC_INIT failed!\n",
__FILE__, __LINE__);
rc = EBUSY;
goto bxe_init_common_exit;
}
val = bxe_reg_poll(sc, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
if (val != 1) {
BXE_PRINTF("%s(%d): CFC CAM_INIT failed!\n",
__FILE__, __LINE__);
rc = EBUSY;
goto bxe_init_common_exit;
}
REG_WR(sc, CFC_REG_DEBUG0, 0);
/* Read NIG statistic and check for first load since powerup. */
bxe_read_dmae(sc, NIG_REG_STAT2_BRB_OCTET, 2);
val = *BXE_SP(sc, wb_data[0]);
/* Do internal memory self test only after a full power cycle. */
if ((CHIP_IS_E1(sc)) && (val == 0) && bxe_int_mem_test(sc)) {
BXE_PRINTF("%s(%d): Internal memory self-test failed!\n",
__FILE__, __LINE__);
rc = EBUSY;
goto bxe_init_common_exit;
}
/* Handle any board specific initialization. */
switch (XGXS_EXT_PHY_TYPE(sc->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
break;
default:
break;
}
bxe_setup_fan_failure_detection(sc);
/* Clear PXP2 attentions. */
REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
bxe_enable_blocks_attention(sc);
if (!NOMCP(sc)) {
bxe_acquire_phy_lock(sc);
bxe_common_init_phy(sc, sc->common.shmem_base);
bxe_release_phy_lock(sc);
} else
BXE_PRINTF(
"%s(%d): Bootcode is missing - cannot initialize PHY!\n",
__FILE__, __LINE__);
bxe_init_common_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Port initialization.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_init_port(struct bxe_softc *sc)
{
uint32_t val, low, high;
uint32_t swap_val, swap_override, aeu_gpio_mask, offset;
uint32_t reg_addr;
int init_stage, port;
port = BP_PORT(sc);
init_stage = port ? PORT1_STAGE : PORT0_STAGE;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Initializing port %d.\n", __FUNCTION__, port);
REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
bxe_init_block(sc, PXP_BLOCK, init_stage);
bxe_init_block(sc, PXP2_BLOCK, init_stage);
bxe_init_block(sc, TCM_BLOCK, init_stage);
bxe_init_block(sc, UCM_BLOCK, init_stage);
bxe_init_block(sc, CCM_BLOCK, init_stage);
bxe_init_block(sc, XCM_BLOCK, init_stage);
bxe_init_block(sc, DQ_BLOCK, init_stage);
bxe_init_block(sc, BRB1_BLOCK, init_stage);
/* Determine the pause threshold for the BRB */
if (IS_E1HMF(sc))
low = (sc->bxe_flags & BXE_ONE_PORT_FLAG) ? 160 : 246;
else if (sc->bxe_ifp->if_mtu > 4096) {
if (sc->bxe_flags & BXE_ONE_PORT_FLAG)
low = 160;
else {
val = sc->bxe_ifp->if_mtu;
/* (24*1024 + val*4)/256 */
low = 96 + (val/64) + ((val % 64) ? 1 : 0);
}
} else
low = (sc->bxe_flags & BXE_ONE_PORT_FLAG) ? 80 : 160;
high = low + 56; /* 14 * 1024 / 256 */
REG_WR(sc, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port * 4, low);
REG_WR(sc, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port * 4, high);
/* Port PRS comes here. */
bxe_init_block(sc, PRS_BLOCK, init_stage);
bxe_init_block(sc, TSDM_BLOCK, init_stage);
bxe_init_block(sc, CSDM_BLOCK, init_stage);
bxe_init_block(sc, USDM_BLOCK, init_stage);
bxe_init_block(sc, XSDM_BLOCK, init_stage);
bxe_init_block(sc, TSEM_BLOCK, init_stage);
bxe_init_block(sc, USEM_BLOCK, init_stage);
bxe_init_block(sc, CSEM_BLOCK, init_stage);
bxe_init_block(sc, XSEM_BLOCK, init_stage);
bxe_init_block(sc, UPB_BLOCK, init_stage);
bxe_init_block(sc, XPB_BLOCK, init_stage);
bxe_init_block(sc, PBF_BLOCK, init_stage);
/* Configure PBF to work without pause for MTU = 9000. */
REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);
/* Update threshold. */
REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, (9040/16));
/* Update initial credit. */
REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4, (9040/16) + 553 - 22);
/* Probe changes. */
REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 1);
DELAY(5000);
REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0);
bxe_init_block(sc, CDU_BLOCK, init_stage);
bxe_init_block(sc, CFC_BLOCK, init_stage);
if (CHIP_IS_E1(sc)) {
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
}
bxe_init_block(sc, HC_BLOCK, init_stage);
bxe_init_block(sc, MISC_AEU_BLOCK, init_stage);
/*
* init aeu_mask_attn_func_0/1:
* - SF mode: bits 3-7 are masked. only bits 0-2 are in use
* - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
* bits 4-7 are used for "per vn group attention"
*/
REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4,
(IS_E1HMF(sc) ? 0xF7 : 0x7));
bxe_init_block(sc, PXPCS_BLOCK, init_stage);
bxe_init_block(sc, EMAC0_BLOCK, init_stage);
bxe_init_block(sc, EMAC1_BLOCK, init_stage);
bxe_init_block(sc, DBU_BLOCK, init_stage);
bxe_init_block(sc, DBG_BLOCK, init_stage);
bxe_init_block(sc, NIG_BLOCK, init_stage);
REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
if (CHIP_IS_E1H(sc)) {
/* Enable outer VLAN support if required. */
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port * 4,
(IS_E1HOV(sc) ? 0x1 : 0x2));
}
REG_WR(sc, NIG_REG_LLFC_ENABLE_0 + port * 4, 0);
REG_WR(sc, NIG_REG_LLFC_OUT_EN_0 + port * 4, 0);
REG_WR(sc, NIG_REG_PAUSE_ENABLE_0 + port * 4, 1);
bxe_init_block(sc, MCP_BLOCK, init_stage);
bxe_init_block(sc, DMAE_BLOCK, init_stage);
switch (XGXS_EXT_PHY_TYPE(sc->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
bxe_set_gpio(sc, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_INPUT_HI_Z, port);
/*
* The GPIO should be swapped if the swap register is
* set and active.
*/
swap_val = REG_RD(sc, NIG_REG_PORT_SWAP);
swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE);
/* Select function upon port-swap configuration. */
if (port == 0) {
offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
aeu_gpio_mask = (swap_val && swap_override) ?
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 :
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0;
} else {
offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0;
aeu_gpio_mask = (swap_val && swap_override) ?
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 :
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1;
}
val = REG_RD(sc, offset);
/* Add GPIO3 to group. */
val |= aeu_gpio_mask;
REG_WR(sc, offset, val);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
/* Add SPIO 5 to group 0. */
reg_addr = port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
val = REG_RD(sc, reg_addr);
val |= AEU_INPUTS_ATTN_BITS_SPIO5;
REG_WR(sc, reg_addr, val);
break;
default:
break;
}
bxe__link_reset(sc);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (0);
}
#define ILT_PER_FUNC (768/2)
#define FUNC_ILT_BASE(func) (func * ILT_PER_FUNC)
/*
* The phys address is shifted right 12 bits and has an added 1=valid
* bit added to the 53rd bit (bit 52) then since this is a wide
* register(TM) we split it into two 32 bit writes.
*/
#define ONCHIP_ADDR1(x) ((uint32_t)(((uint64_t)x >> 12) & 0xFFFFFFFF))
#define ONCHIP_ADDR2(x) ((uint32_t)((1 << 20) | ((uint64_t)x >> 44)))
#define PXP_ONE_ILT(x) (((x) << 10) | x)
#define PXP_ILT_RANGE(f, l) (((l) << 10) | f)
#define CNIC_ILT_LINES 0
/*
* ILT write.
*
* Returns:
* None.
*/
static void
bxe_ilt_wr(struct bxe_softc *sc, uint32_t index, bus_addr_t addr)
{
int reg;
DBENTER(BXE_INSANE_LOAD | BXE_INSANE_RESET);
if (CHIP_IS_E1H(sc))
reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index * 8;
else
reg = PXP2_REG_RQ_ONCHIP_AT + index * 8;
bxe_wb_wr(sc, reg, ONCHIP_ADDR1(addr), ONCHIP_ADDR2(addr));
DBEXIT(BXE_INSANE_LOAD | BXE_INSANE_RESET);
}
/*
* Initialize a function.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_init_func(struct bxe_softc *sc)
{
uint32_t addr, val;
int func, i, port;
port = BP_PORT(sc);
func = BP_FUNC(sc);
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
DBPRINT(sc, (BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET),
"%s(): Initializing port %d, function %d.\n", __FUNCTION__, port,
func);
/* Set MSI reconfigure capability. */
addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
val = REG_RD(sc, addr);
val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
REG_WR(sc, addr, val);
i = FUNC_ILT_BASE(func);
bxe_ilt_wr(sc, i, BXE_SP_MAPPING(sc, context));
if (CHIP_IS_E1H(sc)) {
REG_WR(sc, PXP2_REG_RQ_CDU_FIRST_ILT, i);
REG_WR(sc, PXP2_REG_RQ_CDU_LAST_ILT, i + CNIC_ILT_LINES);
} else /* E1 */
REG_WR(sc, PXP2_REG_PSWRQ_CDU0_L2P + func * 4,
PXP_ILT_RANGE(i, i + CNIC_ILT_LINES));
if (CHIP_IS_E1H(sc)) {
bxe_init_block(sc, MISC_BLOCK, FUNC0_STAGE + func);
bxe_init_block(sc, TCM_BLOCK, FUNC0_STAGE + func);
bxe_init_block(sc, UCM_BLOCK, FUNC0_STAGE + func);
bxe_init_block(sc, CCM_BLOCK, FUNC0_STAGE + func);
bxe_init_block(sc, XCM_BLOCK, FUNC0_STAGE + func);
bxe_init_block(sc, TSEM_BLOCK, FUNC0_STAGE + func);
bxe_init_block(sc, USEM_BLOCK, FUNC0_STAGE + func);
bxe_init_block(sc, CSEM_BLOCK, FUNC0_STAGE + func);
bxe_init_block(sc, XSEM_BLOCK, FUNC0_STAGE + func);
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
REG_WR(sc, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, sc->e1hov);
}
/* Host Coalescing initialization per function. */
if (CHIP_IS_E1H(sc)) {
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
}
bxe_init_block(sc, HC_BLOCK, FUNC0_STAGE + func);
/* Reset PCIe block debug values. */
REG_WR(sc, 0x2114, 0xffffffff);
REG_WR(sc, 0x2120, 0xffffffff);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (0);
}
/*
*
* Returns:
* 0 = Failure, !0 = Failure.
*/
static int
bxe_init_hw(struct bxe_softc *sc, uint32_t load_code)
{
int func, i, rc;
rc = 0;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
sc->dmae_ready = 0;
switch (load_code) {
case FW_MSG_CODE_DRV_LOAD_COMMON:
rc = bxe_init_common(sc);
if (rc)
goto bxe_init_hw_exit;
/* FALLTHROUGH */
case FW_MSG_CODE_DRV_LOAD_PORT:
sc->dmae_ready = 1;
rc = bxe_init_port(sc);
if (rc)
goto bxe_init_hw_exit;
/* FALLTHROUGH */
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
sc->dmae_ready = 1;
rc = bxe_init_func(sc);
if (rc)
goto bxe_init_hw_exit;
break;
default:
DBPRINT(sc, BXE_WARN,
"%s(): Unknown load_code (0x%08X) from MCP!\n",
__FUNCTION__, load_code);
break;
}
/* Fetch additional config data if the bootcode is running. */
if (!NOMCP(sc)) {
func = BP_FUNC(sc);
/* Fetch the pulse sequence number. */
sc->fw_drv_pulse_wr_seq = (SHMEM_RD(sc,
func_mb[func].drv_pulse_mb) & DRV_PULSE_SEQ_MASK);
}
/* Clear the default status block. */
bxe_zero_def_sb(sc);
for (i = 0; i < sc->num_queues; i++)
bxe_zero_sb(sc, BP_L_ID(sc) + i);
bxe_init_hw_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Send a firmware command and wait for the response.
*
* Post a command to shared memory for the bootcode running on the MCP and
* stall until the bootcode responds or a timeout occurs.
*
* Returns:
* 0 = Failure, otherwise firmware response code (FW_MSG_CODE_*).
*/
static int
bxe_fw_command(struct bxe_softc *sc, uint32_t command)
{
uint32_t cnt, rc, seq;
int func;
func = BP_FUNC(sc);
seq = ++sc->fw_seq;
rc = 0;
cnt = 1;
DBRUNMSG(BXE_VERBOSE, bxe_decode_mb_msgs(sc, (command | seq), 0));
BXE_FWMB_LOCK(sc);
/* Write the command to the shared memory mailbox. */
SHMEM_WR(sc, func_mb[func].drv_mb_header, (command | seq));
/* Wait up to 2 seconds for a response. */
do {
/* Wait 10ms for a response. */
DELAY(10000);
/* Pickup the response. */
rc = SHMEM_RD(sc, func_mb[func].fw_mb_header);
} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 400));
DBRUNMSG(BXE_VERBOSE, bxe_decode_mb_msgs(sc, 0, rc));
/* Make sure we read the right response. */
if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK ))
rc &= FW_MSG_CODE_MASK;
else {
BXE_PRINTF("%s(%d): Bootcode failed to respond!\n",
__FILE__, __LINE__);
DBRUN(bxe_dump_fw(sc));
rc = 0;
}
BXE_FWMB_UNLOCK(sc);
return (rc);
}
/*
* Allocate a block of memory and map it for DMA. No partial
* completions allowed, release any resources acquired if we
* can't acquire all resources.
*
* Returns:
* 0 = Success, !0 = Failure
*
* Modifies:
* dma->paddr
* dma->vaddr
* dma->tag
* dma->map
* dma->size
*
*/
static int
bxe_dma_malloc(struct bxe_softc *sc, bus_size_t size,
struct bxe_dma *dma, int mapflags, const char *msg)
{
int rc;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
DBRUNIF(dma->size > 0,
BXE_PRINTF("%s(): Called for %s with size > 0 (%05d)!\n",
__FUNCTION__, msg, (int) dma->size));
rc = bus_dma_tag_create(
sc->parent_tag, /* parent */
BCM_PAGE_SIZE, /* alignment for segs */
BXE_DMA_BOUNDARY, /* cannot cross */
BUS_SPACE_MAXADDR, /* restricted low */
BUS_SPACE_MAXADDR, /* restricted hi */
NULL, NULL, /* filter f(), arg */
size, /* max size for this tag */
1, /* # of discontinuities */
size, /* max seg size */
BUS_DMA_ALLOCNOW, /* flags */
NULL, NULL, /* lock f(), arg */
&dma->tag);
if (rc != 0) {
BXE_PRINTF("%s(%d): bus_dma_tag_create() "
"failed (rc = %d) for %s!\n",
__FILE__, __LINE__, rc, msg);
goto bxe_dma_malloc_fail_create;
}
rc = bus_dmamem_alloc(dma->tag, (void **)&dma->vaddr,
BUS_DMA_NOWAIT, &dma->map);
if (rc != 0) {
BXE_PRINTF("%s(%d): bus_dmamem_alloc() "
"failed (rc = %d) for %s!\n",
__FILE__, __LINE__, rc, msg);
goto bxe_dma_malloc_fail_alloc;
}
rc = bus_dmamap_load(dma->tag, dma->map, dma->vaddr, size,
bxe_dma_map_addr, &dma->paddr, mapflags | BUS_DMA_NOWAIT);
if (rc != 0) {
BXE_PRINTF("%s(%d): bus_dmamap_load() "
"failed (rc = %d) for %s!\n",
__FILE__, __LINE__, rc, msg);
goto bxe_dma_malloc_fail_load;
}
dma->size = size;
DBPRINT(sc, BXE_VERBOSE, "%s(): size=%06d, vaddr=0x%p, "
"paddr=0x%jX - %s\n", __FUNCTION__, (int) dma->size,
dma->vaddr, (uintmax_t) dma->paddr, msg);
goto bxe_dma_malloc_exit;
bxe_dma_malloc_fail_load:
bus_dmamem_free(dma->tag, dma->vaddr, dma->map);
bxe_dma_malloc_fail_alloc:
bus_dma_tag_destroy(dma->tag);
dma->vaddr = NULL;
bxe_dma_malloc_fail_create:
dma->map = NULL;
dma->tag = NULL;
dma->size = 0;
bxe_dma_malloc_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
return (rc);
}
/*
* Release a block of DMA memory associated tag/map.
*
* Returns:
* None
*/
static void
bxe_dma_free(struct bxe_softc *sc, struct bxe_dma *dma)
{
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_UNLOAD);
if (dma->size > 0) {
bus_dmamap_sync(dma->tag, dma->map,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(dma->tag, dma->map);
bus_dmamem_free(dma->tag, dma->vaddr, dma->map);
bus_dma_tag_destroy(dma->tag);
dma->size = 0;
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_UNLOAD);
}
/*
* Free any DMA memory owned by the driver.
*
* Scans through each data structre that requires DMA memory and frees
* the memory if allocated.
*
* Returns:
* Nothing.
*/
static void
bxe_host_structures_free(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i, j, max_agg_queues;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
max_agg_queues = CHIP_IS_E1H(sc) ?
ETH_MAX_AGGREGATION_QUEUES_E1H :
ETH_MAX_AGGREGATION_QUEUES_E1;
if (sc->parent_tag == NULL)
goto bxe_host_structures_free_exit;
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
/* Trust no one! */
if (fp == NULL)
break;
/* Status block. */
bxe_dma_free(sc, &fp->sb_dma);
/* TX chain. */
bxe_dma_free(sc, &fp->tx_dma);
fp->tx_chain = NULL;
/* RX chain */
bxe_dma_free(sc, &fp->rx_dma);
fp->rx_chain = NULL;
/* RCQ chain */
bxe_dma_free(sc, &fp->rcq_dma);
fp->rcq_chain = NULL;
/* SG chain */
bxe_dma_free(sc, &fp->sg_dma);
fp->sg_chain = NULL;
/* Unload and destroy the TX mbuf maps. */
if (fp->tx_mbuf_tag != NULL) {
for (j = 0; j < TOTAL_TX_BD; j++) {
if (fp->tx_mbuf_map[j] != NULL) {
bus_dmamap_unload(
fp->tx_mbuf_tag,
fp->tx_mbuf_map[j]);
bus_dmamap_destroy(
fp->tx_mbuf_tag,
fp->tx_mbuf_map[j]);
}
}
bus_dma_tag_destroy(fp->tx_mbuf_tag);
}
/* Unload and destroy the TPA pool mbuf maps. */
if (fp->rx_mbuf_tag != NULL) {
if (fp->tpa_mbuf_spare_map != NULL) {
bus_dmamap_unload(
fp->rx_mbuf_tag,
fp->tpa_mbuf_spare_map);
bus_dmamap_destroy(
fp->rx_mbuf_tag,
fp->tpa_mbuf_spare_map);
}
for (j = 0; j < max_agg_queues; j++) {
if (fp->tpa_mbuf_map[j] != NULL) {
bus_dmamap_unload(
fp->rx_mbuf_tag,
fp->tpa_mbuf_map[j]);
bus_dmamap_destroy(
fp->rx_mbuf_tag,
fp->tpa_mbuf_map[j]);
}
}
}
/* Unload and destroy the SGE Buf maps. */
if (fp->rx_sge_buf_tag != NULL) {
if (fp->rx_sge_spare_map != NULL) {
bus_dmamap_unload(
fp->rx_sge_buf_tag,
fp->rx_sge_spare_map);
bus_dmamap_destroy(
fp->rx_sge_buf_tag,
fp->rx_sge_spare_map);
}
for (j = 0; j < TOTAL_RX_SGE; j++) {
if (fp->rx_sge_buf_map[j] != NULL) {
bus_dmamap_unload(
fp->rx_sge_buf_tag,
fp->rx_sge_buf_map[j]);
bus_dmamap_destroy(
fp->rx_sge_buf_tag,
fp->rx_sge_buf_map[j]);
}
}
bus_dma_tag_destroy(fp->rx_sge_buf_tag);
}
/* Unload and destroy the RX mbuf maps. */
if (fp->rx_mbuf_tag != NULL) {
if (fp->rx_mbuf_spare_map != NULL) {
bus_dmamap_unload(fp->rx_mbuf_tag,
fp->rx_mbuf_spare_map);
bus_dmamap_destroy(fp->rx_mbuf_tag,
fp->rx_mbuf_spare_map);
}
for (j = 0; j < TOTAL_RX_BD; j++) {
if (fp->rx_mbuf_map[j] != NULL) {
bus_dmamap_unload(
fp->rx_mbuf_tag,
fp->rx_mbuf_map[j]);
bus_dmamap_destroy(
fp->rx_mbuf_tag,
fp->rx_mbuf_map[j]);
}
}
bus_dma_tag_destroy(fp->rx_mbuf_tag);
}
}
/* Destroy the default status block */
bxe_dma_free(sc, &sc->def_sb_dma);
sc->def_sb = NULL;
/* Destroy the statistics block */
bxe_dma_free(sc, &sc->stats_dma);
sc->stats = NULL;
/* Destroy the slowpath block. */
bxe_dma_free(sc, &sc->slowpath_dma);
sc->slowpath = NULL;
/* Destroy the slowpath queue. */
bxe_dma_free(sc, &sc->spq_dma);
sc->spq = NULL;
/* Destroy the slowpath queue. */
bxe_dma_free(sc, &sc->gz_dma);
sc->gz = NULL;
free(sc->strm, M_DEVBUF);
sc->strm = NULL;
bxe_host_structures_free_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
/*
* Get DMA memory from the OS.
*
* Validates that the OS has provided DMA buffers in response to a
* bus_dmamap_load call and saves the physical address of those buffers.
* When the callback is used the OS will return 0 for the mapping function
* (bus_dmamap_load) so we use the value of map_arg->maxsegs to pass any
* failures back to the caller.
*
* Returns:
* Nothing.
*/
static void
bxe_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
bus_addr_t *busaddr;
busaddr = arg;
/* Check for an error and signal the caller that an error occurred. */
if (error) {
printf(
"bxe %s(%d): DMA mapping error (error = %d, nseg = %d)!\n",
__FILE__, __LINE__, error, nseg);
*busaddr = 0;
return;
}
*busaddr = segs->ds_addr;
}
/*
* Allocate any non-paged DMA memory needed by the driver.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_host_structures_alloc(device_t dev)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
int rc;
bus_addr_t busaddr;
bus_size_t max_size, max_seg_size;
int i, j, max_segments;
sc = device_get_softc(dev);
DBENTER(BXE_VERBOSE_RESET);
rc = 0;
int max_agg_queues = CHIP_IS_E1H(sc) ?
ETH_MAX_AGGREGATION_QUEUES_E1H :
ETH_MAX_AGGREGATION_QUEUES_E1;
/*
* Allocate the parent bus DMA tag appropriate for PCI.
*/
rc = bus_dma_tag_create(
bus_get_dma_tag(dev), /* PCI parent tag */
1, /* alignment for segs */
BXE_DMA_BOUNDARY, /* cannot cross */
BUS_SPACE_MAXADDR, /* restricted low */
BUS_SPACE_MAXADDR, /* restricted hi */
NULL, /* filter f() */
NULL, /* filter f() arg */
MAXBSIZE, /* max map for this tag */
BUS_SPACE_UNRESTRICTED, /* # of discontinuities */
BUS_SPACE_MAXSIZE_32BIT, /* max seg size */
0, /* flags */
NULL, /* lock f() */
NULL, /* lock f() arg */
&sc->parent_tag); /* dma tag */
if (rc != 0) {
BXE_PRINTF("%s(%d): Could not allocate parent DMA tag!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
/* Allocate DMA memory for each fastpath structure. */
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
/*
* Allocate status block*
*/
rc = bxe_dma_malloc(sc, BXE_STATUS_BLK_SZ,
&fp->sb_dma, BUS_DMA_NOWAIT, "fp status block");
/* ToDo: Only using 32 bytes out of 4KB allocation! */
if (rc != 0)
goto bxe_host_structures_alloc_exit;
fp->status_block =
(struct host_status_block *) fp->sb_dma.vaddr;
/*
* Allocate TX chain.
*/
rc = bxe_dma_malloc(sc, BXE_TX_CHAIN_PAGE_SZ *
NUM_TX_PAGES, &fp->tx_dma, BUS_DMA_NOWAIT,
"tx chain pages");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
fp->tx_chain = (union eth_tx_bd_types *) fp->tx_dma.vaddr;
/* Link the TX chain pages. */
for (j = 1; j <= NUM_TX_PAGES; j++) {
struct eth_tx_next_bd *tx_n_bd =
&fp->tx_chain[TOTAL_TX_BD_PER_PAGE * j - 1].next_bd;
busaddr = fp->tx_dma.paddr +
BCM_PAGE_SIZE * (j % NUM_TX_PAGES);
tx_n_bd->addr_hi = htole32(U64_HI(busaddr));
tx_n_bd->addr_lo = htole32(U64_LO(busaddr));
}
/*
* Allocate RX chain.
*/
rc = bxe_dma_malloc(sc, BXE_RX_CHAIN_PAGE_SZ *
NUM_RX_PAGES, &fp->rx_dma, BUS_DMA_NOWAIT,
"rx chain pages");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
fp->rx_chain = (struct eth_rx_bd *) fp->rx_dma.vaddr;
/* Link the RX chain pages. */
for (j = 1; j <= NUM_RX_PAGES; j++) {
struct eth_rx_bd *rx_bd =
&fp->rx_chain[TOTAL_RX_BD_PER_PAGE * j - 2];
busaddr = fp->rx_dma.paddr +
BCM_PAGE_SIZE * (j % NUM_RX_PAGES);
rx_bd->addr_hi = htole32(U64_HI(busaddr));
rx_bd->addr_lo = htole32(U64_LO(busaddr));
}
/*
* Allocate CQ chain.
*/
rc = bxe_dma_malloc(sc, BXE_RX_CHAIN_PAGE_SZ *
NUM_RCQ_PAGES, &fp->rcq_dma, BUS_DMA_NOWAIT,
"rcq chain pages");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
fp->rcq_chain = (union eth_rx_cqe *) fp->rcq_dma.vaddr;
/* Link the CQ chain pages. */
for (j = 1; j <= NUM_RCQ_PAGES; j++) {
struct eth_rx_cqe_next_page *nextpg =
(struct eth_rx_cqe_next_page *)
&fp->rcq_chain[TOTAL_RCQ_ENTRIES_PER_PAGE * j - 1];
busaddr = fp->rcq_dma.paddr +
BCM_PAGE_SIZE * (j % NUM_RCQ_PAGES);
nextpg->addr_hi = htole32(U64_HI(busaddr));
nextpg->addr_lo = htole32(U64_LO(busaddr));
}
/*
* Allocate SG chain.
*/
rc = bxe_dma_malloc(sc, BXE_RX_CHAIN_PAGE_SZ *
NUM_RX_SGE_PAGES, &fp->sg_dma, BUS_DMA_NOWAIT,
"sg chain pages");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
fp->sg_chain = (struct eth_rx_sge *) fp->sg_dma.vaddr;
/* Link the SG chain pages. */
for (j = 1; j <= NUM_RX_SGE_PAGES; j++) {
struct eth_rx_sge *nextpg =
&fp->sg_chain[TOTAL_RX_SGE_PER_PAGE * j - 2];
busaddr = fp->sg_dma.paddr +
BCM_PAGE_SIZE * (j % NUM_RX_SGE_PAGES);
nextpg->addr_hi = htole32(U64_HI(busaddr));
nextpg->addr_lo = htole32(U64_LO(busaddr));
}
/*
* Check required size before mapping to conserve resources.
*/
if (sc->tso_enable == TRUE) {
max_size = BXE_TSO_MAX_SIZE;
max_segments = BXE_TSO_MAX_SEGMENTS;
max_seg_size = BXE_TSO_MAX_SEG_SIZE;
} else {
max_size = MCLBYTES * BXE_MAX_SEGMENTS;
max_segments = BXE_MAX_SEGMENTS;
max_seg_size = MCLBYTES;
}
/* Create a DMA tag for TX mbufs. */
if (bus_dma_tag_create(sc->parent_tag,
1, /* alignment for segs */
BXE_DMA_BOUNDARY, /* cannot cross */
BUS_SPACE_MAXADDR, /* restricted low */
BUS_SPACE_MAXADDR, /* restricted hi */
NULL, /* filter f() */
NULL, /* filter f() arg */
max_size, /* max map for this tag */
max_segments, /* # of discontinuities */
max_seg_size, /* max seg size */
0, /* flags */
NULL, /* lock f() */
NULL, /* lock f() arg */
&fp->tx_mbuf_tag)) {
BXE_PRINTF(
"%s(%d): Could not allocate fp[%d] "
"TX mbuf DMA tag!\n",
__FILE__, __LINE__, i);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
/* Create DMA maps for each the TX mbuf cluster(ext buf). */
for (j = 0; j < TOTAL_TX_BD; j++) {
if (bus_dmamap_create(fp->tx_mbuf_tag,
BUS_DMA_NOWAIT,
&fp->tx_mbuf_map[j])) {
BXE_PRINTF(
"%s(%d): Unable to create fp[%02d]."
"tx_mbuf_map[%d] DMA map!\n",
__FILE__, __LINE__, i, j);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
}
/*
* Create a DMA tag for RX mbufs.
*/
if (bus_dma_tag_create(sc->parent_tag,
1, /* alignment for segs */
BXE_DMA_BOUNDARY, /* cannot cross */
BUS_SPACE_MAXADDR, /* restricted low */
BUS_SPACE_MAXADDR, /* restricted hi */
NULL, /* filter f() */
NULL, /* filter f() arg */
MJUM9BYTES, /* max map for this tag */
1, /* # of discontinuities */
MJUM9BYTES, /* max seg size */
0, /* flags */
NULL, /* lock f() */
NULL, /* lock f() arg */
&fp->rx_mbuf_tag)) {
BXE_PRINTF(
"%s(%d): Could not allocate fp[%02d] "
"RX mbuf DMA tag!\n",
__FILE__, __LINE__, i);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
/* Create DMA maps for the RX mbuf clusters. */
if (bus_dmamap_create(fp->rx_mbuf_tag,
BUS_DMA_NOWAIT, &fp->rx_mbuf_spare_map)) {
BXE_PRINTF(
"%s(%d): Unable to create fp[%02d]."
"rx_mbuf_spare_map DMA map!\n",
__FILE__, __LINE__, i);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
for (j = 0; j < TOTAL_RX_BD; j++) {
if (bus_dmamap_create(fp->rx_mbuf_tag,
BUS_DMA_NOWAIT, &fp->rx_mbuf_map[j])) {
BXE_PRINTF(
"%s(%d): Unable to create fp[%02d]."
"rx_mbuf_map[%d] DMA map!\n",
__FILE__, __LINE__, i, j);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
}
/*
* Create a DMA tag for RX SGE bufs.
*/
if (bus_dma_tag_create(sc->parent_tag, 1,
BXE_DMA_BOUNDARY, BUS_SPACE_MAXADDR,
BUS_SPACE_MAXADDR, NULL, NULL, PAGE_SIZE, 1,
PAGE_SIZE, 0, NULL, NULL, &fp->rx_sge_buf_tag)) {
BXE_PRINTF(
"%s(%d): Could not allocate fp[%02d] "
"RX SGE mbuf DMA tag!\n",
__FILE__, __LINE__, i);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
/* Create DMA maps for the SGE mbuf clusters. */
if (bus_dmamap_create(fp->rx_sge_buf_tag,
BUS_DMA_NOWAIT, &fp->rx_sge_spare_map)) {
BXE_PRINTF(
"%s(%d): Unable to create fp[%02d]."
"rx_sge_spare_map DMA map!\n",
__FILE__, __LINE__, i);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
for (j = 0; j < TOTAL_RX_SGE; j++) {
if (bus_dmamap_create(fp->rx_sge_buf_tag,
BUS_DMA_NOWAIT, &fp->rx_sge_buf_map[j])) {
BXE_PRINTF(
"%s(%d): Unable to create fp[%02d]."
"rx_sge_buf_map[%d] DMA map!\n",
__FILE__, __LINE__, i, j);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
}
/* Create DMA maps for the TPA pool mbufs. */
if (bus_dmamap_create(fp->rx_mbuf_tag,
BUS_DMA_NOWAIT, &fp->tpa_mbuf_spare_map)) {
BXE_PRINTF(
"%s(%d): Unable to create fp[%02d]."
"tpa_mbuf_spare_map DMA map!\n",
__FILE__, __LINE__, i);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
for (j = 0; j < max_agg_queues; j++) {
if (bus_dmamap_create(fp->rx_mbuf_tag,
BUS_DMA_NOWAIT, &fp->tpa_mbuf_map[j])) {
BXE_PRINTF(
"%s(%d): Unable to create fp[%02d]."
"tpa_mbuf_map[%d] DMA map!\n",
__FILE__, __LINE__, i, j);
rc = ENOMEM;
goto bxe_host_structures_alloc_exit;
}
}
bxe_init_sge_ring_bit_mask(fp);
}
/*
* Allocate default status block.
*/
rc = bxe_dma_malloc(sc, BXE_DEF_STATUS_BLK_SZ, &sc->def_sb_dma,
BUS_DMA_NOWAIT, "default status block");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
sc->def_sb = (struct host_def_status_block *) sc->def_sb_dma.vaddr;
/*
* Allocate statistics block.
*/
rc = bxe_dma_malloc(sc, BXE_STATS_BLK_SZ, &sc->stats_dma,
BUS_DMA_NOWAIT, "statistics block");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
sc->stats = (struct statistics_block *) sc->stats_dma.vaddr;
/*
* Allocate slowpath block.
*/
rc = bxe_dma_malloc(sc, BXE_SLOWPATH_SZ, &sc->slowpath_dma,
BUS_DMA_NOWAIT, "slowpath block");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
sc->slowpath = (struct bxe_slowpath *) sc->slowpath_dma.vaddr;
/*
* Allocate slowpath queue.
*/
rc = bxe_dma_malloc(sc, BXE_SPQ_SZ, &sc->spq_dma,
BUS_DMA_NOWAIT, "slowpath queue");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
sc->spq = (struct eth_spe *) sc->spq_dma.vaddr;
/*
* Allocate firmware decompression buffer.
*/
rc = bxe_dma_malloc(sc, BXE_FW_BUF_SIZE, &sc->gz_dma,
BUS_DMA_NOWAIT, "gunzip buffer");
if (rc != 0)
goto bxe_host_structures_alloc_exit;
sc->gz = sc->gz_dma.vaddr;
if (sc->strm == NULL) {
goto bxe_host_structures_alloc_exit;
}
sc->strm = malloc(sizeof(*sc->strm), M_DEVBUF, M_NOWAIT);
bxe_host_structures_alloc_exit:
DBEXIT(BXE_VERBOSE_RESET);
return (rc);
}
/*
* Program the MAC address for 57710 controllers.
*
* Returns:
* Nothing.
*/
static void
bxe_set_mac_addr_e1(struct bxe_softc *sc, int set)
{
struct mac_configuration_cmd *config;
struct mac_configuration_entry *config_table;
uint8_t *eaddr;
int port;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
config = BXE_SP(sc, mac_config);
port = BP_PORT(sc);
/*
* CAM allocation:
* Port 0 Unicast Addresses: 32 Perfect Match Filters (31-0)
* Port 1 Unicast Addresses: 32 Perfect Match Filters (63-32)
* Port 0 Multicast Addresses: 128 Hashes (127-64)
* Port 1 Multicast Addresses: 128 Hashes (191-128)
*/
config->hdr.length = 2;
config->hdr.offset = port ? 32 : 0;
config->hdr.client_id = BP_CL_ID(sc);
config->hdr.reserved1 = 0;
/* Program the primary MAC address. */
config_table = &config->config_table[0];
eaddr = sc->link_params.mac_addr;
config_table->cam_entry.msb_mac_addr = eaddr[0] << 8 | eaddr[1];
config_table->cam_entry.middle_mac_addr = eaddr[2] << 8 | eaddr[3];
config_table->cam_entry.lsb_mac_addr = eaddr[4] << 8 | eaddr[5];
config_table->cam_entry.flags = htole16(port);
if (set)
config_table->target_table_entry.flags = 0;
else
CAM_INVALIDATE(config_table);
config_table->target_table_entry.vlan_id = 0;
DBPRINT(sc, BXE_VERBOSE, "%s(): %s MAC (%04x:%04x:%04x)\n",
__FUNCTION__, (set ? "Setting" : "Clearing"),
config_table->cam_entry.msb_mac_addr,
config_table->cam_entry.middle_mac_addr,
config_table->cam_entry.lsb_mac_addr);
/* Program the broadcast MAC address. */
config_table = &config->config_table[1];
config_table->cam_entry.msb_mac_addr = 0xffff;
config_table->cam_entry.middle_mac_addr = 0xffff;
config_table->cam_entry.lsb_mac_addr = 0xffff;
config_table->cam_entry.flags = htole16(port);
if (set)
config_table->target_table_entry.flags =
TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
else
CAM_INVALIDATE(config_table);
config_table->target_table_entry.vlan_id = 0;
/* Post the command to slow path queue. */
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_SET_MAC, 0,
U64_HI(BXE_SP_MAPPING(sc, mac_config)),
U64_LO(BXE_SP_MAPPING(sc, mac_config)), 0);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
/*
* Program the MAC address for 57711/57711E controllers.
*
* Returns:
* Nothing.
*/
static void
bxe_set_mac_addr_e1h(struct bxe_softc *sc, int set)
{
struct mac_configuration_cmd_e1h *config;
struct mac_configuration_entry_e1h *config_table;
uint8_t *eaddr;
int func, port;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
config = (struct mac_configuration_cmd_e1h *)BXE_SP(sc, mac_config);
port = BP_PORT(sc);
func = BP_FUNC(sc);
if (set && (sc->state != BXE_STATE_OPEN)) {
DBPRINT(sc, BXE_VERBOSE,
"%s(): Can't set E1H MAC in state 0x%08X!\n", __FUNCTION__,
sc->state);
goto bxe_set_mac_addr_e1h_exit;
}
/*
* CAM allocation:
* Function 0-7 Unicast Addresses: 8 Perfect Match Filters
* Multicast Addresses: 20 + FUNC * 20, 20 each (???)
*/
config->hdr.length = 1;
config->hdr.offset = func;
config->hdr.client_id = 0xff;
config->hdr.reserved1 = 0;
/* Program the primary MAC address. */
config_table = &config->config_table[0];
eaddr = sc->link_params.mac_addr;
config_table->msb_mac_addr = eaddr[0] << 8 | eaddr[1];
config_table->middle_mac_addr = eaddr[2] << 8 | eaddr[3];
config_table->lsb_mac_addr = eaddr[4] << 8 | eaddr[5];
config_table->clients_bit_vector = htole32(1 << sc->fp->cl_id);
config_table->vlan_id = 0;
config_table->e1hov_id = htole16(sc->e1hov);
if (set)
config_table->flags = port;
else
config_table->flags =
MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE;
DBPRINT(sc, BXE_VERBOSE,
"%s(): %s MAC (%04x:%04x:%04x), E1HOV = %d, CLID = %d\n",
__FUNCTION__, (set ? "Setting" : "Clearing"),
config_table->msb_mac_addr, config_table->middle_mac_addr,
config_table->lsb_mac_addr, sc->e1hov, BP_L_ID(sc));
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_SET_MAC, 0,
U64_HI(BXE_SP_MAPPING(sc, mac_config)),
U64_LO(BXE_SP_MAPPING(sc, mac_config)), 0);
bxe_set_mac_addr_e1h_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
/*
* Programs the various packet receive modes (broadcast and multicast).
*
* Returns:
* Nothing.
*/
static void
bxe_set_rx_mode(struct bxe_softc *sc)
{
struct ifnet *ifp;
struct ifmultiaddr *ifma;
struct mac_configuration_cmd *config;
struct mac_configuration_entry *config_table;
uint32_t mc_filter[MC_HASH_SIZE];
uint8_t *maddr;
uint32_t crc, bit, regidx, rx_mode;
int i, old, offset, port;
BXE_CORE_LOCK_ASSERT(sc);
rx_mode = BXE_RX_MODE_NORMAL;
port = BP_PORT(sc);
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
if (sc->state != BXE_STATE_OPEN) {
DBPRINT(sc, BXE_WARN, "%s(): State (0x%08X) is not open!\n",
__FUNCTION__, sc->state);
goto bxe_set_rx_mode_exit;
}
ifp = sc->bxe_ifp;
/*
* Check for promiscuous, all multicast, or selected
* multicast address filtering.
*/
if (ifp->if_flags & IFF_PROMISC) {
/* Enable promiscuous mode. */
rx_mode = BXE_RX_MODE_PROMISC;
} else if (ifp->if_flags & IFF_ALLMULTI ||
ifp->if_amcount > BXE_MAX_MULTICAST) {
/* Enable all multicast addresses. */
rx_mode = BXE_RX_MODE_ALLMULTI;
} else {
/* Enable selective multicast mode. */
if (CHIP_IS_E1(sc)) {
i = 0;
config = BXE_SP(sc, mcast_config);
if_maddr_rlock(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
maddr = (uint8_t *)LLADDR(
(struct sockaddr_dl *)ifma->ifma_addr);
config_table = &config->config_table[i];
config_table->cam_entry.msb_mac_addr =
maddr[0] << 8 | maddr[1];
config_table->cam_entry.middle_mac_addr =
maddr[2] << 8 | maddr[3];
config_table->cam_entry.lsb_mac_addr =
maddr[4] << 8 | maddr[5];
config_table->cam_entry.flags = htole16(port);
config_table->target_table_entry.flags = 0;
config_table->target_table_entry.
clients_bit_vector =
htole32(1 << BP_L_ID(sc));
config_table->target_table_entry.vlan_id = 0;
i++;
DBPRINT(sc, BXE_INFO,
"%s(): Setting MCAST[%d] (%04X:%04X:%04X)\n",
__FUNCTION__, i,
config_table->cam_entry.msb_mac_addr,
config_table->cam_entry.middle_mac_addr,
config_table->cam_entry.lsb_mac_addr);
}
if_maddr_runlock(ifp);
old = config->hdr.length;
/* Invalidate any extra MC entries in the CAM. */
if (old > i) {
for (; i < old; i++) {
config_table = &config->config_table[i];
if (CAM_IS_INVALID(config_table))
break;
/* Invalidate */
CAM_INVALIDATE(config_table);
}
}
offset = BXE_MAX_MULTICAST * (1 + port);
config->hdr.length = i;
config->hdr.offset = offset;
config->hdr.client_id = sc->fp->cl_id;
config->hdr.reserved1 = 0;
wmb();
bxe_sp_post(sc, RAMROD_CMD_ID_ETH_SET_MAC, 0,
U64_HI(BXE_SP_MAPPING(sc, mcast_config)),
U64_LO(BXE_SP_MAPPING(sc, mcast_config)), 0);
} else { /* E1H */
/* Accept one or more multicasts */
memset(mc_filter, 0, 4 * MC_HASH_SIZE);
if_maddr_rlock(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
crc = ether_crc32_le(ifma->ifma_addr->sa_data,
ETHER_ADDR_LEN);
bit = (crc >> 24) & 0xff;
regidx = bit >> 5;
bit &= 0x1f;
mc_filter[regidx] |= (1 << bit);
}
if_maddr_runlock(ifp);
for (i = 0; i < MC_HASH_SIZE; i++)
REG_WR(sc, MC_HASH_OFFSET(sc, i), mc_filter[i]);
}
}
DBPRINT(sc, BXE_VERBOSE, "%s(): Enabling new receive mode: 0x%08X\n",
__FUNCTION__, rx_mode);
sc->rx_mode = rx_mode;
bxe_set_storm_rx_mode(sc);
bxe_set_rx_mode_exit:
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET);
}
/*
* Function specific controller reset.
*
* Returns:
* Nothing.
*/
static void
bxe_reset_func(struct bxe_softc *sc)
{
int base, func, i, port;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
port = BP_PORT(sc);
func = BP_FUNC(sc);
/* Configure IGU. */
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
REG_WR(sc, HC_REG_CONFIG_0 + (port * 4), 0x1000);
/* Clear ILT. */
base = FUNC_ILT_BASE(func);
for (i = base; i < base + ILT_PER_FUNC; i++)
bxe_ilt_wr(sc, i, 0);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
/*
* Port specific controller reset.
*
* Returns:
* Nothing.
*/
static void
bxe_reset_port(struct bxe_softc *sc)
{
uint32_t val;
int port;
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
port = BP_PORT(sc);
REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
/* Do not receive packets to BRB. */
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + port * 4, 0x0);
/* Do not direct receive packets that are not for MCP to the BRB. */
REG_WR(sc, port ? NIG_REG_LLH1_BRB1_NOT_MCP :
NIG_REG_LLH0_BRB1_NOT_MCP, 0x0);
/* Configure AEU. */
REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, 0);
DELAY(100000);
/* Check for BRB port occupancy. */
val = REG_RD(sc, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port * 4);
if (val)
DBPRINT(sc, BXE_VERBOSE,
"%s(): BRB1 is not empty (%d blocks are occupied)!\n",
__FUNCTION__, val);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
/*
* Common controller reset.
*
* Returns:
* Nothing.
*/
static void
bxe_reset_common(struct bxe_softc *sc)
{
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
0xd3ffff7f);
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
0x1403);
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
/*
* Reset the controller.
*
* Returns:
* Nothing.
*/
static void
bxe_reset_chip(struct bxe_softc *sc, uint32_t reset_code)
{
DBENTER(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
switch (reset_code) {
case FW_MSG_CODE_DRV_UNLOAD_COMMON:
bxe_reset_port(sc);
bxe_reset_func(sc);
bxe_reset_common(sc);
break;
case FW_MSG_CODE_DRV_UNLOAD_PORT:
bxe_reset_port(sc);
bxe_reset_func(sc);
break;
case FW_MSG_CODE_DRV_UNLOAD_FUNCTION:
bxe_reset_func(sc);
break;
default:
BXE_PRINTF("%s(%d): Unknown reset code (0x%08X) from MCP!\n",
__FILE__, __LINE__, reset_code);
break;
}
DBEXIT(BXE_VERBOSE_LOAD | BXE_VERBOSE_RESET | BXE_VERBOSE_UNLOAD);
}
/*
* Called by the OS to set media options (link, speed, etc.)
* when the user specifies "ifconfig bxe media XXX" or
* "ifconfig bxe mediaopt XXX".
*
* Returns:
* 0 = Success, !0 = Failure
*/
static int
bxe_ifmedia_upd(struct ifnet *ifp)
{
struct bxe_softc *sc;
struct ifmedia *ifm;
int rc;
sc = ifp->if_softc;
DBENTER(BXE_VERBOSE_PHY);
ifm = &sc->bxe_ifmedia;
rc = 0;
/* We only support Ethernet media type. */
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) {
rc = EINVAL;
goto bxe_ifmedia_upd_exit;
}
switch (IFM_SUBTYPE(ifm->ifm_media)) {
case IFM_AUTO:
/* ToDo: What to do here? */
/* Doing nothing translates to success here. */
break;
case IFM_10G_CX4:
/* Fall-through */
case IFM_10G_SR:
/* Fall-through */
case IFM_10G_T:
/* Fall-through */
case IFM_10G_TWINAX:
/* Fall-through */
default:
/* We don't support channging the media type. */
DBPRINT(sc, BXE_WARN, "%s(): Invalid media type!\n",
__FUNCTION__);
rc = EINVAL;
}
bxe_ifmedia_upd_exit:
DBENTER(BXE_VERBOSE_PHY);
return (rc);
}
/*
* Called by the OS to report current media status
* (link, speed, etc.).
*
* Returns:
* Nothing.
*/
static void
bxe_ifmedia_status(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct bxe_softc *sc;
sc = ifp->if_softc;
DBENTER(BXE_EXTREME_LOAD | BXE_EXTREME_RESET);
/* Report link down if the driver isn't running. */
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
ifmr->ifm_active |= IFM_NONE;
goto bxe_ifmedia_status_exit;
}
/* Setup the default interface info. */
ifmr->ifm_status = IFM_AVALID;
ifmr->ifm_active = IFM_ETHER;
if (sc->link_vars.link_up)
ifmr->ifm_status |= IFM_ACTIVE;
else {
ifmr->ifm_active |= IFM_NONE;
goto bxe_ifmedia_status_exit;
}
ifmr->ifm_active |= sc->media;
if (sc->link_vars.duplex == MEDIUM_FULL_DUPLEX)
ifmr->ifm_active |= IFM_FDX;
else
ifmr->ifm_active |= IFM_HDX;
bxe_ifmedia_status_exit:
DBEXIT(BXE_EXTREME_LOAD | BXE_EXTREME_RESET);
}
/*
* Update last maximum scatter gather entry.
*
* Returns:
* None.
*/
static __inline void
bxe_update_last_max_sge(struct bxe_fastpath *fp, uint16_t index)
{
uint16_t last_max;
last_max = fp->last_max_sge;
if (SUB_S16(index, last_max) > 0)
fp->last_max_sge = index;
}
/*
* Clear scatter gather mask next elements.
*
* Returns:
* None
*/
static void
bxe_clear_sge_mask_next_elems(struct bxe_fastpath *fp)
{
int i, index, j;
for (i = 0; i < NUM_RX_SGE_PAGES; i++) {
index = i * TOTAL_RX_SGE_PER_PAGE + USABLE_RX_SGE_PER_PAGE;
for (j = 0; j < 2; j++) {
SGE_MASK_CLEAR_BIT(fp, index);
index++;
}
}
}
/*
* Update SGE producer.
*
* Returns:
* None.
*/
static void
bxe_update_sge_prod(struct bxe_fastpath *fp,
struct eth_fast_path_rx_cqe *fp_cqe)
{
struct bxe_softc *sc;
uint16_t delta, first_elem, last_max, last_elem, sge_len;
int i;
sc = fp->sc;
DBENTER(BXE_EXTREME_RECV);
delta = 0;
sge_len = SGE_PAGE_ALIGN(le16toh(fp_cqe->pkt_len) -
le16toh(fp_cqe->len_on_bd)) >> SGE_PAGE_SHIFT;
if (!sge_len)
goto bxe_update_sge_prod_exit;
/* First mark all used pages. */
for (i = 0; i < sge_len; i++)
SGE_MASK_CLEAR_BIT(fp, RX_SGE(le16toh(fp_cqe->sgl[i])));
/* Assume that the last SGE index is the biggest. */
bxe_update_last_max_sge(fp, le16toh(fp_cqe->sgl[sge_len - 1]));
last_max = RX_SGE(fp->last_max_sge);
last_elem = last_max >> RX_SGE_MASK_ELEM_SHIFT;
first_elem = RX_SGE(fp->rx_sge_prod) >> RX_SGE_MASK_ELEM_SHIFT;
/* If ring is not full. */
if (last_elem + 1 != first_elem)
last_elem++;
/* Now update the producer index. */
for (i = first_elem; i != last_elem; i = NEXT_SGE_MASK_ELEM(i)) {
if (fp->rx_sge_mask[i])
break;
fp->rx_sge_mask[i] = RX_SGE_MASK_ELEM_ONE_MASK;
delta += RX_SGE_MASK_ELEM_SZ;
}
if (delta > 0) {
fp->rx_sge_prod += delta;
/* clear page-end entries */
bxe_clear_sge_mask_next_elems(fp);
}
bxe_update_sge_prod_exit:
DBEXIT(BXE_EXTREME_RECV);
}
/*
* Initialize scatter gather ring bitmask.
*
* Each entry in the SGE is associated with an aggregation in process.
* Since there is no guarantee that all Ethernet frames associated with
* a partciular TCP flow will arrive at the adapter and be placed into
* the SGE chain contiguously, we maintain a bitmask for each SGE element
* that identifies which aggregation an Ethernet frame belongs to.
*
* Returns:
* None
*/
static __inline void
bxe_init_sge_ring_bit_mask(struct bxe_fastpath *fp)
{
/* Set the mask to all 1s, it's faster to compare to 0 than to 0xf. */
memset(fp->rx_sge_mask, 0xff,
(TOTAL_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT) * sizeof(uint64_t));
/*
* The SGE chain is formatted just like the RX chain.
* The last two elements are reserved as a "next page pointer"
* to the next page of SGE elements. Clear the last two
* elements in each SGE chain page since they will never be
* used to track an aggregation.
*/
bxe_clear_sge_mask_next_elems(fp);
}
/*
* The current mbuf is part of an aggregation. Swap the mbuf into the TPA
* aggregation queue, swap an empty mbuf back onto the receive chain, and
* mark the current aggregation queue as in-progress.
*
* Returns:
* None.
*/
static void
bxe_tpa_start(struct bxe_fastpath *fp, uint16_t queue, uint16_t cons,
uint16_t prod)
{
struct bxe_softc *sc;
struct mbuf *m_temp;
struct eth_rx_bd *rx_bd;
bus_dmamap_t map_temp;
int max_agg_queues;
sc = fp->sc;
DBENTER(BXE_INSANE_RECV | BXE_INSANE_TPA);
DBPRINT(sc, BXE_EXTREME_TPA,
"%s(): fp[%02d].tpa[%02d], cons=0x%04X, prod=0x%04X\n",
__FUNCTION__, fp->index, queue, cons, prod);
max_agg_queues = CHIP_IS_E1(sc) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
ETH_MAX_AGGREGATION_QUEUES_E1H;
DBRUNIF((queue > max_agg_queues),
BXE_PRINTF("%s(): fp[%02d] illegal aggregation (%d > %d)!\n",
__FUNCTION__, fp->index, queue, max_agg_queues));
DBRUNIF((fp->tpa_state[queue] != BXE_TPA_STATE_STOP),
BXE_PRINTF("%s(): Starting aggregation on "
"fp[%02d].tpa[%02d] even though queue is not in the "
"TPA_STOP state!\n", __FUNCTION__, fp->index, queue));
/* Remove the existing mbuf and mapping from the TPA pool. */
m_temp = fp->tpa_mbuf_ptr[queue];
map_temp = fp->tpa_mbuf_map[queue];
/* Only the paranoid survive! */
if(m_temp == NULL) {
BXE_PRINTF("%s(%d): fp[%02d].tpa[%02d] not allocated!\n",
__FILE__, __LINE__, fp->index, queue);
/* ToDo: Additional error handling! */
goto bxe_tpa_start_exit;
}
/* Move received mbuf and mapping to TPA pool. */
fp->tpa_mbuf_ptr[queue] = fp->rx_mbuf_ptr[cons];
fp->tpa_mbuf_map[queue] = fp->rx_mbuf_map[cons];
/* Place the TPA bin into the START state. */
fp->tpa_state[queue] = BXE_TPA_STATE_START;
DBRUN(fp->tpa_queue_used |= (1 << queue));
/* Get the rx_bd for the next open entry on the receive chain. */
rx_bd = &fp->rx_chain[prod];
/* Update the rx_bd with the empty mbuf from the TPA pool. */
rx_bd->addr_hi = htole32(U64_HI(fp->tpa_mbuf_segs[queue].ds_addr));
rx_bd->addr_lo = htole32(U64_LO(fp->tpa_mbuf_segs[queue].ds_addr));
fp->rx_mbuf_ptr[prod] = m_temp;
fp->rx_mbuf_map[prod] = map_temp;
bxe_tpa_start_exit:
DBEXIT(BXE_INSANE_RECV | BXE_INSANE_TPA);
}
/*
* When a TPA aggregation is completed, loop through the individual mbufs
* of the aggregation, combining them into a single mbuf which will be sent
* up the stack. Refill all freed SGEs with mbufs as we go along.
*
* Returns:
* 0 = Success, !0 = Failure.
*/
static int
bxe_fill_frag_mbuf(struct bxe_softc *sc, struct bxe_fastpath *fp,
struct mbuf *m, struct eth_fast_path_rx_cqe *fp_cqe, uint16_t cqe_idx)
{
struct mbuf *m_frag;
uint32_t frag_len, frag_size, pages, i;
uint16_t sge_idx, len_on_bd;
int j, rc;
DBENTER(BXE_EXTREME_RECV | BXE_EXTREME_TPA);
rc = 0;
len_on_bd = le16toh(fp_cqe->len_on_bd);
frag_size = le16toh(fp_cqe->pkt_len) - len_on_bd;
pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
DBPRINT(sc, BXE_VERBOSE_TPA,
"%s(): len_on_bd=%d, frag_size=%d, pages=%d\n",
__FUNCTION__, len_on_bd, frag_size, pages);
/* Make sure the aggregated frame is not too big to handle. */
if (pages > 8 * PAGES_PER_SGE) {
DBPRINT(sc, BXE_FATAL,
"%s(): fp[%02d].rx_sge[0x%04X] has too many pages (%d)!\n",
__FUNCTION__, fp->index, cqe_idx, pages);
DBPRINT(sc, BXE_FATAL,
"%s(): fp_cqe->pkt_len = %d fp_cqe->len_on_bd = %d\n",
__FUNCTION__, le16toh(fp_cqe->pkt_len), len_on_bd);
bxe_panic_dump(sc);
rc = EINVAL;
goto bxe_fill_frag_mbuf_exit;
}
/*
* Scan through the scatter gather list, pulling individual
* mbufs into a single mbuf for the host stack.
*/
for (i = 0, j = 0; i < pages; i += PAGES_PER_SGE, j++) {
sge_idx = RX_SGE(le16toh(fp_cqe->sgl[j]));
/*
* Firmware gives the indices of the SGE as if the ring is an
* array (meaning that the "next" element will consume 2
* indices).
*/
frag_len = min(frag_size, (uint32_t)(BCM_PAGE_SIZE *
PAGES_PER_SGE));
DBPRINT(sc, BXE_VERBOSE_TPA,
"%s(): i=%d, j=%d, frag_size=%d, frag_len=%d\n",
__FUNCTION__, i, j, frag_size, frag_len);
m_frag = fp->rx_sge_buf_ptr[sge_idx];
/* Allocate a new mbuf for the SGE. */
rc = bxe_alloc_rx_sge_mbuf(fp, sge_idx);
if (rc) {
/*
* Leave all remaining SGEs in the ring.
*/
goto bxe_fill_frag_mbuf_exit;
}
/* Update the fragment its length. */
m_frag->m_len = frag_len;
/* Concatenate the fragment to the head mbuf. */
m_cat(m, m_frag);
DBRUN(fp->sge_mbuf_alloc--);
/* Update TPA mbuf size and remaining fragment size. */
m->m_pkthdr.len += frag_len;
frag_size -= frag_len;
}
bxe_fill_frag_mbuf_exit:
DBPRINT(sc, BXE_VERBOSE_TPA,
"%s(): frag_size=%d\n", __FUNCTION__, frag_size);
DBEXIT(BXE_EXTREME_RECV | BXE_EXTREME_TPA);
return (rc);
}
/*
* The aggregation on the current TPA queue has completed. Pull the
* individual mbuf fragments together into a single mbuf, perform all
* necessary checksum calculations, and send the resuting mbuf to the stack.
*
* Returns:
* None.
*/
static void
bxe_tpa_stop(struct bxe_softc *sc, struct bxe_fastpath *fp, uint16_t queue,
int pad, int len, union eth_rx_cqe *cqe, uint16_t cqe_idx)
{
struct mbuf *m;
struct ifnet *ifp;
int rc;
DBENTER(BXE_INSANE_RECV | BXE_INSANE_TPA);
DBPRINT(sc, (BXE_EXTREME_RECV | BXE_EXTREME_TPA),
"%s(): fp[%02d].tpa[%02d], len=%d, pad=%d\n",
__FUNCTION__, fp->index, queue, len, pad);
rc = 0;
ifp = sc->bxe_ifp;
m = fp->tpa_mbuf_ptr[queue];
/* Allocate a replacement before modifying existing mbuf. */
rc = bxe_alloc_tpa_mbuf(fp, queue);
if (rc) {
/* Drop the frame and log a soft error. */
fp->rx_soft_errors++;
goto bxe_tpa_stop_exit;
}
/* We have a replacement, fixup the current mbuf. */
m_adj(m, pad);
m->m_pkthdr.len = m->m_len = len;
/* Mark the checksums valid (taken care of by firmware). */
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED | CSUM_IP_VALID |
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
m->m_pkthdr.csum_data = 0xffff;
/* Aggregate all of the SGEs into a single mbuf. */
rc = bxe_fill_frag_mbuf(sc, fp, m, &cqe->fast_path_cqe, cqe_idx);
if (rc) {
/* Drop the packet and log an error. */
fp->rx_soft_errors++;
m_freem(m);
} else {
/* Find VLAN tag and send frame up to the stack. */
if ((le16toh(cqe->fast_path_cqe.pars_flags.flags) &
PARSING_FLAGS_VLAN)) {
m->m_pkthdr.ether_vtag =
cqe->fast_path_cqe.vlan_tag;
m->m_flags |= M_VLANTAG;
}
/* Assign packet to the appropriate interface. */
m->m_pkthdr.rcvif = ifp;
/* Update packet statistics. */
fp->rx_tpa_pkts++;
ifp->if_ipackets++;
/* ToDo: Any potential locking issues here? */
/* Pass the frame to the stack. */
(*ifp->if_input)(ifp, m);
}
/* We passed mbuf up the stack or dropped the frame. */
DBRUN(fp->tpa_mbuf_alloc--);
bxe_tpa_stop_exit:
fp->tpa_state[queue] = BXE_TPA_STATE_STOP;
DBRUN(fp->tpa_queue_used &= ~(1 << queue));
DBEXIT(BXE_INSANE_RECV | BXE_INSANE_TPA);
}
/*
* Notify the controller that the RX producer indices have been updated for
* a fastpath connection by writing them to the controller.
*
* Returns:
* None
*/
static __inline void
bxe_update_rx_prod(struct bxe_softc *sc, struct bxe_fastpath *fp,
uint16_t bd_prod, uint16_t cqe_prod, uint16_t sge_prod)
{
volatile struct ustorm_eth_rx_producers rx_prods = {0};
int i;
/* Update producers. */
rx_prods.bd_prod = bd_prod;
rx_prods.cqe_prod = cqe_prod;
rx_prods.sge_prod = sge_prod;
wmb();
for (i = 0; i < sizeof(struct ustorm_eth_rx_producers) / 4; i++){
REG_WR(sc, BAR_USTORM_INTMEM +
USTORM_RX_PRODS_OFFSET(BP_PORT(sc), fp->cl_id) + i * 4,
((volatile uint32_t *) &rx_prods)[i]);
}
DBPRINT(sc, BXE_EXTREME_RECV, "%s(%d): Wrote fp[%02d] bd_prod = 0x%04X, "
"cqe_prod = 0x%04X, sge_prod = 0x%04X\n", __FUNCTION__, curcpu,
fp->index, bd_prod, cqe_prod, sge_prod);
}
/*
* Processes received frames.
*
* Returns:
* Nothing.
*/
static void
bxe_rxeof(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
struct ifnet *ifp;
uint16_t rx_bd_cons, rx_bd_cons_idx;
uint16_t rx_bd_prod, rx_bd_prod_idx;
uint16_t rx_cq_cons, rx_cq_cons_idx;
uint16_t rx_cq_prod, rx_cq_cons_sb;
unsigned long rx_pkts = 0;
int rc;
sc = fp->sc;
ifp = sc->bxe_ifp;
DBENTER(BXE_EXTREME_RECV);
/* Get the status block's view of the RX completion consumer index. */
rx_cq_cons_sb = bxe_rx_cq_cons(fp);
/*
* Get working copies of the driver's view of the
* RX indices. These are 16 bit values that are
* expected to increment from 0 to 65535 and then
* wrap-around to 0 again.
*/
rx_bd_cons = fp->rx_bd_cons;
rx_bd_prod = fp->rx_bd_prod;
rx_cq_cons = fp->rx_cq_cons;
rx_cq_prod = fp->rx_cq_prod;
DBPRINT(sc, (BXE_EXTREME_RECV),
"%s(%d): BEFORE: fp[%02d], rx_bd_cons = 0x%04X, rx_bd_prod = 0x%04X, "
"rx_cq_cons_sw = 0x%04X, rx_cq_prod_sw = 0x%04X\n", __FUNCTION__,
curcpu, fp->index, rx_bd_cons, rx_bd_prod, rx_cq_cons, rx_cq_prod);
/*
* Memory barrier to prevent speculative reads of the RX buffer
* from getting ahead of the index in the status block.
*/
rmb();
/*
* Scan through the receive chain as long
* as there is work to do.
*/
while (rx_cq_cons != rx_cq_cons_sb) {
struct mbuf *m;
union eth_rx_cqe *cqe;
uint8_t cqe_fp_flags;
uint16_t len, pad;
/*
* Convert the 16 bit indices used by hardware
* into array indices used by the driver.
*/
rx_cq_cons_idx = RCQ_ENTRY(rx_cq_cons);
rx_bd_prod_idx = RX_BD(rx_bd_prod);
rx_bd_cons_idx = RX_BD(rx_bd_cons);
wmb();
/* Fetch the completion queue entry (i.e. cookie). */
cqe = (union eth_rx_cqe *)
&fp->rcq_chain[rx_cq_cons_idx];
cqe_fp_flags = cqe->fast_path_cqe.type_error_flags;
/* Sanity check the cookie flags. */
if (__predict_false(cqe_fp_flags == 0)) {
fp->rx_null_cqe_flags++;
DBRUN(bxe_dump_cqe(fp, rx_cq_cons_idx, cqe));
/* ToDo: What error handling can be done here? */
}
/* Check the CQE type for slowpath or fastpath completion. */
if (__predict_false(CQE_TYPE(cqe_fp_flags) ==
RX_ETH_CQE_TYPE_ETH_RAMROD)) {
/* This is a slowpath completion. */
bxe_sp_event(fp, cqe);
goto bxe_rxeof_next_cqe;
} else {
/* This is a fastpath completion. */
/* Get the length and pad information from the CQE. */
len = le16toh(cqe->fast_path_cqe.pkt_len);
pad = cqe->fast_path_cqe.placement_offset;
/* Check if the completion is for TPA. */
if ((fp->disable_tpa == FALSE) &&
(TPA_TYPE(cqe_fp_flags) !=
(TPA_TYPE_START | TPA_TYPE_END))) {
uint16_t queue = cqe->fast_path_cqe.queue_index;
/*
* No need to worry about error flags in
* the frame as the firmware has already
* managed that for us when aggregating
* the frames.
*/
/* Check if TPA aggregation has started. */
if (TPA_TYPE(cqe_fp_flags) == TPA_TYPE_START) {
bxe_tpa_start(fp, queue, rx_bd_cons_idx,
rx_bd_prod_idx);
goto bxe_rxeof_next_rx;
}
/* Check if TPA aggregation has completed. */
if (TPA_TYPE(cqe_fp_flags) == TPA_TYPE_END) {
DBRUNIF(!BXE_RX_SUM_FIX(cqe),
DBPRINT(sc, BXE_FATAL,
"%s(): STOP on non-TCP data.\n",
__FUNCTION__));
/*
* This is the size of the linear
* data on this mbuf.
*/
len = le16toh(cqe->fast_path_cqe.len_on_bd);
/*
* Stop the aggregation and pass
* the frame up.
*/
bxe_tpa_stop(sc, fp, queue, pad, len,
cqe, rx_cq_cons_idx);
bxe_update_sge_prod(fp,
&cqe->fast_path_cqe);
goto bxe_rxeof_next_cqe;
}
}
m = fp->rx_mbuf_ptr[rx_bd_cons_idx];
/* Allocate a replacement before modifying existing mbuf. */
rc = bxe_alloc_rx_bd_mbuf(fp, rx_bd_prod_idx);
if (rc) {
/* Drop the frame and log a soft error. */
fp->rx_soft_errors++;
goto bxe_rxeof_next_rx;
}
/* Check if the received frame has any errors. */
if (__predict_false(cqe_fp_flags &
ETH_RX_ERROR_FLAGS)) {
DBPRINT(sc, BXE_WARN ,
"%s(): fp[%02d].cqe[0x%04X] has errors "
"(0x%08X)!\n", __FUNCTION__, fp->index,
rx_cq_cons, cqe_fp_flags);
fp->rx_soft_errors++;
goto bxe_rxeof_next_rx;
}
/* We have a replacement, fixup the current mbuf. */
m_adj(m, pad);
m->m_pkthdr.len = m->m_len = len;
/* Assign packet to the appropriate interface. */
m->m_pkthdr.rcvif = ifp;
/* Assume no hardware checksum complated. */
m->m_pkthdr.csum_flags = 0;
/* Validate checksum if offload enabled. */
if (ifp->if_capenable & IFCAP_RXCSUM) {
/* Check whether IP checksummed or not. */
if (sc->rx_csum &&
!(cqe->fast_path_cqe.status_flags &
ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG)) {
m->m_pkthdr.csum_flags |=
CSUM_IP_CHECKED;
if (__predict_false(cqe_fp_flags &
ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG)) {
DBPRINT(sc, BXE_WARN_SEND,
"%s(): Invalid IP checksum!\n",
__FUNCTION__);
} else
m->m_pkthdr.csum_flags |=
CSUM_IP_VALID;
}
/* Check for a valid TCP/UDP frame. */
if (sc->rx_csum &&
!(cqe->fast_path_cqe.status_flags &
ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)) {
/* Check for a good TCP/UDP checksum. */
if (__predict_false(cqe_fp_flags &
ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)) {
DBPRINT(sc, BXE_VERBOSE_RECV,
"%s(): Invalid TCP/UDP checksum!\n",
__FUNCTION__);
} else {
m->m_pkthdr.csum_data = 0xFFFF;
m->m_pkthdr.csum_flags |=
(CSUM_DATA_VALID |
CSUM_PSEUDO_HDR);
}
}
}
/*
* If we received a packet with a vlan tag,
* attach that information to the packet.
*/
if (cqe->fast_path_cqe.pars_flags.flags &
PARSING_FLAGS_VLAN) {
m->m_pkthdr.ether_vtag =
cqe->fast_path_cqe.vlan_tag;
m->m_flags |= M_VLANTAG;
}
#if __FreeBSD_version >= 800000
/* Tell OS what RSS queue was used for this flow. */
m->m_pkthdr.flowid = fp->index;
m->m_flags |= M_FLOWID;
#endif
/* Last chance to check for problems. */
DBRUN(bxe_validate_rx_packet(fp, rx_cq_cons, cqe, m));
/* Update packet statistics. */
ifp->if_ipackets++;
rx_pkts++;
/* ToDo: Any potential locking issues here? */
/* Pass the frame to the stack. */
(*ifp->if_input)(ifp, m);
DBRUN(fp->rx_mbuf_alloc--);
}
bxe_rxeof_next_rx:
rx_bd_prod = NEXT_RX_BD(rx_bd_prod);
rx_bd_cons = NEXT_RX_BD(rx_bd_cons);
bxe_rxeof_next_cqe:
rx_cq_prod = NEXT_RCQ_IDX(rx_cq_prod);
rx_cq_cons = NEXT_RCQ_IDX(rx_cq_cons);
/*
* Memory barrier to prevent speculative reads of the RX buffer
* from getting ahead of the index in the status block.
*/
rmb();
}
/* Update driver copy of the fastpath indices. */
fp->rx_bd_cons = rx_bd_cons;
fp->rx_bd_prod = rx_bd_prod;
fp->rx_cq_cons = rx_cq_cons;
fp->rx_cq_prod = rx_cq_prod;
DBPRINT(sc, (BXE_EXTREME_RECV),
"%s(%d): AFTER: fp[%02d], rx_bd_cons = 0x%04X, rx_bd_prod = 0x%04X, "
"rx_cq_cons_sw = 0x%04X, rx_cq_prod_sw = 0x%04X\n", __FUNCTION__,
curcpu, fp->index, rx_bd_cons, rx_bd_prod, rx_cq_cons, rx_cq_prod);
/* Update producers */
bxe_update_rx_prod(sc, fp, fp->rx_bd_prod,
fp->rx_cq_prod, fp->rx_sge_prod);
bus_space_barrier(sc->bxe_btag, sc->bxe_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
fp->rx_pkts += rx_pkts;
DBEXIT(BXE_EXTREME_RECV);
}
/*
* Processes transmit completions.
*
* Returns:
* Nothing.
*/
static void
bxe_txeof(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
struct ifnet *ifp;
struct eth_tx_start_bd *txbd;
uint16_t hw_pkt_cons, sw_pkt_cons, sw_tx_bd_cons;
uint16_t bd_index, pkt_index, nbds;
int i;
sc = fp->sc;
ifp = sc->bxe_ifp;
DBENTER(BXE_EXTREME_SEND);
/* Get the hardware's view of the TX packet consumer index. */
hw_pkt_cons = le16toh(*fp->tx_pkt_cons_sb);
sw_pkt_cons = fp->tx_pkt_cons;
sw_tx_bd_cons = fp->tx_bd_cons;
/* Cycle through any completed TX chain page entries. */
while (sw_pkt_cons != hw_pkt_cons) {
bd_index = TX_BD(sw_tx_bd_cons);
pkt_index = TX_BD(sw_pkt_cons);
txbd = &fp->tx_chain[bd_index].start_bd;
nbds = txbd->nbd;
/* Free the completed frame's mbuf. */
if (__predict_true(fp->tx_mbuf_ptr[pkt_index] != NULL)) {
/* Unmap the mbuf from non-paged memory. */
bus_dmamap_unload(fp->tx_mbuf_tag,
fp->tx_mbuf_map[pkt_index]);
/* Return the mbuf to the system. */
m_freem(fp->tx_mbuf_ptr[pkt_index]);
fp->tx_mbuf_alloc--;
fp->tx_mbuf_ptr[pkt_index] = NULL;
fp->opackets++;
} else {
fp->tx_chain_lost_mbuf++;
}
/* Updated packet consumer value. */
sw_pkt_cons++;
/* Skip over the remaining used buffer descriptors. */
fp->tx_bd_used -= nbds;
for (i = 0; i < nbds; i++)
sw_tx_bd_cons = NEXT_TX_BD(sw_tx_bd_cons);
/* Check for new work since we started. */
hw_pkt_cons = le16toh(*fp->tx_pkt_cons_sb);
rmb();
}
/* Enable new transmits if we've made enough room. */
if (fp->tx_bd_used < BXE_TX_CLEANUP_THRESHOLD) {
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
if (fp->tx_bd_used == 0) {
/*
* Clear the watchdog timer if we've emptied
* the TX chain.
*/
fp->watchdog_timer = 0;
} else {
/*
* Reset the watchdog timer if we still have
* transmits pending.
*/
fp->watchdog_timer = BXE_TX_TIMEOUT;
}
}
/* Save our indices. */
fp->tx_pkt_cons = sw_pkt_cons;
fp->tx_bd_cons = sw_tx_bd_cons;
DBEXIT(BXE_EXTREME_SEND);
}
/*
* Transmit timeout handler.
*
* Returns:
* 0 = No timeout, !0 = timeout occurred.
*/
static int
bxe_watchdog(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
int rc = 0;
sc = fp->sc;
DBENTER(BXE_INSANE_SEND);
BXE_FP_LOCK(fp);
if (fp->watchdog_timer == 0 || --fp->watchdog_timer) {
rc = EINVAL;
BXE_FP_UNLOCK(fp);
goto bxe_watchdog_exit;
}
BXE_FP_UNLOCK(fp);
BXE_PRINTF("TX watchdog timeout occurred on fp[%02d], "
"resetting!\n", fp->index);
/* DBRUNLV(BXE_FATAL, bxe_breakpoint(sc)); */
BXE_CORE_LOCK(sc);
/* Mark the interface as down. */
sc->bxe_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
bxe_stop_locked(sc, UNLOAD_NORMAL);
DELAY(10000);
bxe_init_locked(sc, LOAD_OPEN);
BXE_CORE_UNLOCK(sc);
bxe_watchdog_exit:
DBEXIT(BXE_INSANE_SEND);
return (rc);
}
/*
* The periodic timer tick routine.
*
* This code only runs when the interface is up.
*
* Returns:
* None
*/
static void
bxe_tick(void *xsc)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
#if 0
/* Re-enable at a later time. */
uint32_t drv_pulse, mcp_pulse;
#endif
int i, func;
sc = xsc;
DBENTER(BXE_INSANE_MISC);
/* Check for TX timeouts on any fastpath. */
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
if (bxe_watchdog(fp) != 0)
break;
}
func = BP_FUNC(sc);
/* Schedule the next tick. */
callout_reset(&sc->bxe_tick_callout, hz, bxe_tick, sc);
#if 0
if (!NOMCP(sc)) {
func = BP_FUNC(sc);
++sc->fw_drv_pulse_wr_seq;
sc->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
/* Let the MCP know we're alive. */
drv_pulse = sc->fw_drv_pulse_wr_seq;
SHMEM_WR(sc, func_mb[func].drv_pulse_mb, drv_pulse);
/* Check if the MCP is still alive. */
mcp_pulse = (SHMEM_RD(sc, func_mb[func].mcp_pulse_mb) &
MCP_PULSE_SEQ_MASK);
/*
* The delta between driver pulse and MCP response should be 1
* (before MCP response) or 0 (after MCP response).
*/
if ((drv_pulse != mcp_pulse) && (drv_pulse != ((mcp_pulse + 1) &
MCP_PULSE_SEQ_MASK))) {
/* Someone's in cardiac arrest. */
DBPRINT(sc, BXE_WARN,
"%s(): drv_pulse (0x%x) != mcp_pulse (0x%x)\n",
__FUNCTION__, drv_pulse, mcp_pulse);
}
}
#endif
if ((sc->state == BXE_STATE_OPEN) || (sc->state == BXE_STATE_DISABLED))
bxe_stats_handle(sc, STATS_EVENT_UPDATE);
}
#ifdef BXE_DEBUG
/*
* Allows the driver state to be dumped through the sysctl interface.
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_driver_state(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
int error, i, result;
sc = (struct bxe_softc *)arg1;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1) {
bxe_dump_driver_state(sc);
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
bxe_dump_fp_state(fp);
}
bxe_dump_status_block(sc);
}
return (error);
}
/*
* Allows the hardware state to be dumped through the sysctl interface.
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_hw_state(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
int error, result;
sc = (struct bxe_softc *)arg1;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1)
bxe_dump_hw_state(sc);
return (error);
}
/*
* Allows the MCP firmware to be dumped through the sysctl interface.
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_dump_fw(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
int error, result;
sc = (struct bxe_softc *)arg1;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1)
bxe_dump_fw(sc);
return (error);
}
/*
* Provides a sysctl interface to allow dumping the RX completion chain.
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_dump_rx_cq_chain(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
int error, result;
sc = (struct bxe_softc *)arg1;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if ((result >= 0) && (result < sc->num_queues)) {
fp = &sc->fp[result];
bxe_dump_rx_cq_chain(fp, 0, TOTAL_RCQ_ENTRIES);
}
return (error);
}
/*
* Provides a sysctl interface to allow dumping the RX chain.
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_dump_rx_bd_chain(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
int error, result;
sc = (struct bxe_softc *)arg1;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if ((result >= 0) && (result < sc->num_queues)) {
fp = &sc->fp[result];
bxe_dump_rx_bd_chain(fp, 0, TOTAL_RX_BD);
}
return (error);
}
/*
* Provides a sysctl interface to allow dumping the TX chain.
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_dump_tx_chain(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
struct bxe_fastpath *fp;
int error, result;
sc = (struct bxe_softc *)arg1;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if ((result >= 0) && (result < sc->num_queues)) {
fp = &sc->fp[result];
bxe_dump_tx_chain(fp, 0, TOTAL_TX_BD);
}
return (error);
}
/*
* Provides a sysctl interface to allow reading arbitrary registers in the
* device. DO NOT ENABLE ON PRODUCTION SYSTEMS!
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_reg_read(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
uint32_t result, val;
int error;
sc = (struct bxe_softc *)arg1;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || (req->newptr == NULL))
return (error);
val = REG_RD(sc, result);
BXE_PRINTF("reg 0x%08X = 0x%08X\n", result, val);
return (error);
}
/*
* Provides a sysctl interface to allow generating a grcdump.
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_grcdump(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
int error, result;
sc = (struct bxe_softc *)arg1;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1) {
/* Generate a grcdump and log the contents.*/
bxe_grcdump(sc, 1);
} else {
/* Generate a grcdump and don't log the contents. */
bxe_grcdump(sc, 0);
}
return (error);
}
/*
* Provides a sysctl interface to forcing the driver to dump state and
* enter the debugger. DO NOT ENABLE ON PRODUCTION SYSTEMS!
*
* Returns:
* 0 for success, positive value for failure.
*/
static int
bxe_sysctl_breakpoint(SYSCTL_HANDLER_ARGS)
{
struct bxe_softc *sc;
int error, result;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1) {
sc = (struct bxe_softc *)arg1;
bxe_breakpoint(sc);
}
return (error);
}
#endif
/*
* Adds any sysctl parameters for tuning or debugging purposes.
*
* Returns:
* None.
*/
static void
bxe_add_sysctls(struct bxe_softc *sc)
{
struct sysctl_ctx_list *ctx =
device_get_sysctl_ctx(sc->dev);
struct sysctl_oid_list *children =
SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev));
struct bxe_port_stats *estats = &sc->eth_stats;
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_bytes_received_hi",
CTLFLAG_RD, &estats->total_bytes_received_hi,
0, "Total bytes received (hi)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_bytes_received_lo",
CTLFLAG_RD, &estats->total_bytes_received_lo,
0, "Total bytes received (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_valid_bytes_received_hi",
CTLFLAG_RD, &estats->valid_bytes_received_hi,
0, "Valid bytes received (hi)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_valid_bytes_received_lo",
CTLFLAG_RD, &estats->valid_bytes_received_lo,
0, "Valid bytes received (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_unicast_packets_received_hi",
CTLFLAG_RD, &estats->total_unicast_packets_received_hi,
0, "Total unicast packets received (hi)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_unicast_packets_received_lo",
CTLFLAG_RD, &estats->total_unicast_packets_received_lo,
0, "Total unicast packets received (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_bytes_transmitted_hi",
CTLFLAG_RD, &estats->total_bytes_transmitted_hi,
0, "Total bytes transmitted (hi)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_bytes_transmitted_lo",
CTLFLAG_RD, &estats->total_bytes_transmitted_lo,
0, "Total bytes transmitted (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_unicast_packets_transmitted_hi",
CTLFLAG_RD, &estats->total_unicast_packets_transmitted_hi,
0, "Total unicast packets transmitted (hi)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_unicast_packets_transmitted_lo",
CTLFLAG_RD, &estats->total_unicast_packets_transmitted_lo,
0, "Total unicast packets transmitted (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_broadcast_packets_received_lo",
CTLFLAG_RD, &estats->total_broadcast_packets_received_lo,
0, "Total broadcast packets received (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_broadcast_packets_transmitted_lo",
CTLFLAG_RD, &estats->total_broadcast_packets_transmitted_lo,
0, "Total broadcast packets transmitted (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_multicast_packets_received_lo",
CTLFLAG_RD, &estats->total_multicast_packets_received_lo,
0, "Total multicast packets received (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"estats_total_multicast_packets_transmitted_lo",
CTLFLAG_RD, &estats->total_multicast_packets_transmitted_lo,
0, "Total multicast packets transmitted (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"tx_stat_etherstatspkts64octets_hi",
CTLFLAG_RD, &estats->tx_stat_etherstatspkts64octets_hi,
0, "Total 64 byte packets transmitted (hi)");
/* ToDo: Fix for 64 bit access. */
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"tx_stat_etherstatspkts64octets_lo",
CTLFLAG_RD, &estats->tx_stat_etherstatspkts64octets_lo,
0, "Total 64 byte packets transmitted (lo)");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"driver_xoff",
CTLFLAG_RD, &estats->driver_xoff,
0, "Driver transmit queue full count");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"tx_start_called_with_link_down",
CTLFLAG_RD, &sc->tx_start_called_with_link_down,
"TX start routine called while link down count");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"tx_start_called_with_queue_full",
CTLFLAG_RD, &sc->tx_start_called_with_queue_full,
"TX start routine called with queue full count");
/* ToDo: Add more statistics here. */
#ifdef BXE_DEBUG
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "bxe_debug",
CTLFLAG_RW, &bxe_debug, 0,
"Debug message level flag");
#endif
do {
#define QUEUE_NAME_LEN 32
char namebuf[QUEUE_NAME_LEN];
struct sysctl_oid *queue_node;
struct sysctl_oid_list *queue_list;
for (int i = 0; i < sc->num_queues; i++) {
struct bxe_fastpath *fp = &sc->fp[i];
snprintf(namebuf, QUEUE_NAME_LEN, "fp[%02d]", i);
queue_node = SYSCTL_ADD_NODE(ctx, children, OID_AUTO,
namebuf, CTLFLAG_RD, NULL, "Queue Name");
queue_list = SYSCTL_CHILDREN(queue_node);
/*
* Receive related fastpath statistics.*
*/
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"rx_pkts",
CTLFLAG_RD, &fp->rx_pkts,
"Received packets");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"rx_tpa_pkts",
CTLFLAG_RD, &fp->rx_tpa_pkts,
"Received TPA packets");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"rx_null_cqe_flags",
CTLFLAG_RD, &fp->rx_null_cqe_flags,
"CQEs with NULL flags count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"rx_soft_errors",
CTLFLAG_RD, &fp->rx_soft_errors,
"Received frames dropped by driver count");
/*
* Transmit related fastpath statistics.*
*/
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_pkts",
CTLFLAG_RD, &fp->tx_pkts,
"Transmitted packets");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_soft_errors",
CTLFLAG_RD, &fp->tx_soft_errors,
"Transmit frames dropped by driver count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_offload_frames_csum_ip",
CTLFLAG_RD, &fp->tx_offload_frames_csum_ip,
"IP checksum offload frame count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_offload_frames_csum_tcp",
CTLFLAG_RD, &fp->tx_offload_frames_csum_tcp,
"TCP checksum offload frame count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_offload_frames_csum_udp",
CTLFLAG_RD, &fp->tx_offload_frames_csum_udp,
"UDP checksum offload frame count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_offload_frames_tso",
CTLFLAG_RD, &fp->tx_offload_frames_tso,
"TSO offload frame count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_header_splits",
CTLFLAG_RD, &fp->tx_header_splits,
"TSO frame header/data split count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_encap_failures",
CTLFLAG_RD, &fp->tx_encap_failures,
"TX encapsulation failure count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_hw_queue_full",
CTLFLAG_RD, &fp->tx_hw_queue_full,
"TX H/W queue too full to add a frame count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_hw_max_queue_depth",
CTLFLAG_RD, &fp->tx_hw_max_queue_depth,
"TX H/W maximum queue depth count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_dma_mapping_failure",
CTLFLAG_RD, &fp->tx_dma_mapping_failure,
"TX DMA mapping failure");
SYSCTL_ADD_INT(ctx, queue_list, OID_AUTO,
"tx_max_drbr_queue_depth",
CTLFLAG_RD, &fp->tx_max_drbr_queue_depth,
0, "TX S/W queue maximum depth");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_window_violation_std",
CTLFLAG_RD, &fp->tx_window_violation_std,
"Standard frame TX BD window violation count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_window_violation_tso",
CTLFLAG_RD, &fp->tx_window_violation_tso,
"TSO frame TX BD window violation count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_unsupported_tso_request_ipv6",
CTLFLAG_RD, &fp->tx_unsupported_tso_request_ipv6,
"TSO frames with unsupported IPv6 protocol count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_unsupported_tso_request_not_tcp",
CTLFLAG_RD, &fp->tx_unsupported_tso_request_not_tcp,
"TSO frames with unsupported protocol count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_chain_lost_mbuf",
CTLFLAG_RD, &fp->tx_chain_lost_mbuf,
"Mbufs lost on TX chain count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_frame_deferred",
CTLFLAG_RD, &fp->tx_frame_deferred,
"TX frame deferred from H/W queue to S/W queue count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"tx_queue_xoff",
CTLFLAG_RD, &fp->tx_queue_xoff,
"TX queue full count");
/*
* Memory related fastpath statistics.*
*/
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"mbuf_rx_bd_alloc_failed",
CTLFLAG_RD, &fp->mbuf_rx_bd_alloc_failed,
"RX BD mbuf allocation failure count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"mbuf_rx_bd_mapping_failed",
CTLFLAG_RD, &fp->mbuf_rx_bd_mapping_failed,
"RX BD mbuf mapping failure count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"mbuf_tpa_alloc_failed",
CTLFLAG_RD, &fp->mbuf_tpa_alloc_failed,
"TPA mbuf allocation failure count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"mbuf_tpa_mapping_failed",
CTLFLAG_RD, &fp->mbuf_tpa_mapping_failed,
"TPA mbuf mapping failure count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"mbuf_sge_alloc_failed",
CTLFLAG_RD, &fp->mbuf_sge_alloc_failed,
"SGE mbuf allocation failure count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"mbuf_sge_mapping_failed",
CTLFLAG_RD, &fp->mbuf_sge_mapping_failed,
"SGE mbuf mapping failure count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"mbuf_defrag_attempts",
CTLFLAG_RD, &fp->mbuf_defrag_attempts,
"Mbuf defrag attempt count");
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO,
"mbuf_defrag_failures",
CTLFLAG_RD, &fp->mbuf_defrag_failures,
"Mbuf defrag failure count");
}
} while (0);
#ifdef BXE_DEBUG
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "driver_state",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0,
bxe_sysctl_driver_state, "I", "Drive state information");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "hw_state",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0,
bxe_sysctl_hw_state, "I", "Hardware state information");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "dump_fw",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0,
bxe_sysctl_dump_fw, "I", "Dump MCP firmware");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "dump_rx_bd_chain",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0,
bxe_sysctl_dump_rx_bd_chain, "I", "Dump rx_bd chain");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "dump_rx_cq_chain",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0,
bxe_sysctl_dump_rx_cq_chain, "I", "Dump cqe chain");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "dump_tx_chain",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0,
bxe_sysctl_dump_tx_chain, "I", "Dump tx_bd chain");
/*
* Generates a GRCdump (run sysctl dev.bxe.0.grcdump=0
* before accessing buffer below).
*/
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "grcdump",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0, bxe_sysctl_grcdump,
"I", "Initiate a grcdump operation");
/*
* Hidden sysctl.
* Use "sysctl -b dev.bxe.0.grcdump_buffer > buf.bin".
*/
SYSCTL_ADD_OPAQUE(ctx, children, OID_AUTO, "grcdump_buffer",
CTLFLAG_RD | CTLFLAG_SKIP, sc->grcdump_buffer,
BXE_GRCDUMP_BUF_SIZE, "IU", "Access grcdump buffer");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "breakpoint",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0,
bxe_sysctl_breakpoint, "I", "Driver breakpoint");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "reg_read",
CTLTYPE_INT | CTLFLAG_RW, (void *)sc, 0,
bxe_sysctl_reg_read, "I", "Register read");
#endif /* BXE_DEBUG */
}
/*
* BXE Debug Routines
*/
#ifdef BXE_DEBUG
/*
* Writes out the header for the debug dump buffer.
*
* Returns:
* None.
*
* Modifies:
* index
*/
static void
bxe_dump_debug_header(struct bxe_softc *sc, uint32_t *index)
{
struct hd_param hd_param_cu = {0};
uint32_t *buf;
buf = sc->grcdump_buffer;
if (CHIP_IS_E1H(sc))
hd_param_cu = hd_param_e1h;
else
hd_param_cu = hd_param_e1;
buf[(*index)++] = hd_param_cu.time_stamp;
buf[(*index)++] = hd_param_cu.diag_ver;
buf[(*index)++] = hd_param_cu.grc_dump_ver;
buf[(*index)++] = REG_RD_IND(sc, XSTORM_WAITP_ADDRESS);
buf[(*index)++] = REG_RD_IND(sc, TSTORM_WAITP_ADDRESS);
buf[(*index)++] = REG_RD_IND(sc, USTORM_WAITP_ADDRESS);
buf[(*index)++] = REG_RD_IND(sc, CSTORM_WAITP_ADDRESS);
/* The size of the header is stored at the first DWORD. */
buf[0] = (*index) - 1;
}
/*
* Writes to the controller to prepare it for a dump.
*
* Returns:
* None.
*
* Modifies:
* None.
*/
static void
bxe_dump_debug_writes(struct bxe_softc *sc)
{
uint32_t write_val;
write_val = 1;
/* Halt the STORMs to get a consistent device state. */
REG_WR_IND(sc, XSTORM_WAITP_ADDRESS, write_val);
REG_WR_IND(sc, TSTORM_WAITP_ADDRESS, write_val);
REG_WR_IND(sc, USTORM_WAITP_ADDRESS, write_val);
REG_WR_IND(sc, CSTORM_WAITP_ADDRESS, write_val);
if (CHIP_IS_E1H(sc))
REG_WR_IND(sc, TSTORM_CAM_MODE, write_val);
}
/*
* Cycles through the required register reads and dumps them
* to the debug buffer.
*
* Returns:
* None.
*
* Modifies:
* index
*/
static void
bxe_dump_debug_reg_read(struct bxe_softc *sc, uint32_t *index)
{
preg_addr preg_addrs;
uint32_t regs_count, *buf;
uint32_t i, reg_addrs_index;
buf = sc->grcdump_buffer;
preg_addrs = NULL;
/* Read different registers for different controllers. */
if (CHIP_IS_E1H(sc)) {
regs_count = regs_count_e1h;
preg_addrs = ®_addrs_e1h[0];
} else {
regs_count = regs_count_e1;
preg_addrs = ®_addrs_e1[0];
}
/* ToDo: Add a buffer size check. */
for (reg_addrs_index = 0; reg_addrs_index < regs_count;
reg_addrs_index++) {
for (i = 0; i < preg_addrs[reg_addrs_index].size; i++) {
buf[(*index)++] = REG_RD_IND(sc,
preg_addrs[reg_addrs_index].addr + (i * 4));
}
}
}
/*
* Cycles through the required wide register reads and dumps them
* to the debug buffer.
*
* Returns:
* None.
*/
static void
bxe_dump_debug_reg_wread(struct bxe_softc *sc, uint32_t *index)
{
pwreg_addr pwreg_addrs;
uint32_t reg_addrs_index, reg_add_read, reg_add_count;
uint32_t *buf, cam_index, wregs_count;
buf = sc->grcdump_buffer;
pwreg_addrs = NULL;
/* Read different registers for different controllers. */
if (CHIP_IS_E1H(sc)) {
wregs_count = wregs_count_e1h;
pwreg_addrs = &wreg_addrs_e1h[0];
} else {
wregs_count = wregs_count_e1;
pwreg_addrs = &wreg_addrs_e1[0];
}
for (reg_addrs_index = 0; reg_addrs_index < wregs_count;
reg_addrs_index++) {
reg_add_read = pwreg_addrs[reg_addrs_index].addr;
for (reg_add_count = 0; reg_add_count <
pwreg_addrs[reg_addrs_index].size; reg_add_count++) {
buf[(*index)++] = REG_RD_IND(sc, reg_add_read);
reg_add_read += sizeof(uint32_t);
for (cam_index = 0; cam_index <
pwreg_addrs[reg_addrs_index].const_regs_count;
cam_index++)
buf[(*index)++] = REG_RD_IND(sc,
pwreg_addrs[reg_addrs_index].const_regs[cam_index]);
}
}
}
/*
* Performs a debug dump for offline diagnostics.
*
* Note that when this routine is called the STORM
* processors will be stopped in order to create a
* cohesive dump. The controller will need to be
* reset before the device can begin passing traffic
* again.
*
* Returns:
* None.
*/
static void
bxe_grcdump(struct bxe_softc *sc, int log)
{
uint32_t *buf, i, index;
index = 1;
buf = sc->grcdump_buffer;
if (buf != NULL) {
/* Write the header and regsiters contents to the dump buffer. */
bxe_dump_debug_header(sc, &index);
bxe_dump_debug_writes(sc);
bxe_dump_debug_reg_read(sc,&index);
bxe_dump_debug_reg_wread(sc, &index);
/* Print the results to the system log is necessary. */
if (log) {
BXE_PRINTF(
"-----------------------------"
" grcdump "
"-----------------------------\n");
BXE_PRINTF("Buffer length = 0x%08X bytes\n", index * 4);
for (i = 0; i < index; i += 8) {
BXE_PRINTF(
"0x%08X - 0x%08X 0x%08X 0x%08X 0x%08X "
"0x%08X 0x%08X 0x%08X 0x%08X\n", i * 4,
buf[i + 0], buf[i + 1], buf[i + 2],
buf[i + 3], buf[i + 4], buf[i + 5],
buf[i + 6], buf[i + 7]);
}
BXE_PRINTF(
"-----------------------------"
"--------------"
"-----------------------------\n");
}
} else {
BXE_PRINTF("No grcdump buffer allocated!\n");
}
}
/*
* Check that an Etherent frame is valid and prints out debug info if it's
* not.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_validate_rx_packet(struct bxe_fastpath *fp, uint16_t comp_cons,
union eth_rx_cqe *cqe, struct mbuf *m)
{
struct bxe_softc *sc;
int error;
sc = fp->sc;
/* Check that the mbuf is sane. */
error = m_sanity(m, FALSE);
if (error != 1 || ((m->m_len < ETHER_HDR_LEN) |
(m->m_len > ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD))) {
m_print(m, 128);
bxe_dump_enet(sc, m);
bxe_dump_cqe(fp, comp_cons, cqe);
/* Make sure the packet has a valid length. */
}
}
/*
* Prints out Ethernet frame information from an mbuf.
*
* Partially decode an Ethernet frame to look at some important headers.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_enet(struct bxe_softc *sc, struct mbuf *m)
{
struct ether_vlan_header *eh;
uint16_t etype;
int e_hlen;
struct ip *ip;
struct tcphdr *th;
struct udphdr *uh;
struct arphdr *ah;
BXE_PRINTF(
"-----------------------------"
" Frame Decode "
"-----------------------------\n");
eh = mtod(m, struct ether_vlan_header *);
/* Handle VLAN encapsulation if present. */
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
etype = ntohs(eh->evl_proto);
e_hlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
} else {
etype = ntohs(eh->evl_encap_proto);
e_hlen = ETHER_HDR_LEN;
}
BXE_PRINTF("enet: dest = %6D, src = %6D, type = 0x%04X, e_hlen = %d\n",
eh->evl_dhost, ":", eh->evl_shost, ":", etype, e_hlen);
switch (etype) {
case ETHERTYPE_IP:
ip = (struct ip *)(m->m_data + e_hlen);
BXE_PRINTF(
"--ip: dest = 0x%08X , src = 0x%08X, "
"ip_hlen = %d bytes, len = %d bytes, protocol = 0x%02X, "
"ip_id = 0x%04X, csum = 0x%04X\n",
ntohl(ip->ip_dst.s_addr), ntohl(ip->ip_src.s_addr),
(ip->ip_hl << 2), ntohs(ip->ip_len), ip->ip_p,
ntohs(ip->ip_id), ntohs(ip->ip_sum));
switch (ip->ip_p) {
case IPPROTO_TCP:
th = (struct tcphdr *)((caddr_t)ip + (ip->ip_hl << 2));
BXE_PRINTF(
"-tcp: dest = %d, src = %d, tcp_hlen = %d "
"bytes, flags = 0x%b, csum = 0x%04X\n",
ntohs(th->th_dport), ntohs(th->th_sport),
(th->th_off << 2), th->th_flags,
"\20\10CWR\07ECE\06URG\05ACK\04PSH\03RST\02SYN\01FIN",
ntohs(th->th_sum));
break;
case IPPROTO_UDP:
uh = (struct udphdr *)((caddr_t)ip + (ip->ip_hl << 2));
BXE_PRINTF(
"-udp: dest = %d, src = %d, udp_hlen = %d "
"bytes, len = %d bytes, csum = 0x%04X\n",
ntohs(uh->uh_dport), ntohs(uh->uh_sport),
(int)sizeof(struct udphdr), ntohs(uh->uh_ulen),
ntohs(uh->uh_sum));
break;
case IPPROTO_ICMP:
BXE_PRINTF("icmp:\n");
break;
default:
BXE_PRINTF("----: Other IP protocol.\n");
}
break;
case ETHERTYPE_IPV6:
/* ToDo: Add IPv6 support. */
BXE_PRINTF("IPv6 not supported!.\n");
break;
case ETHERTYPE_ARP:
BXE_PRINTF("-arp: ");
ah = (struct arphdr *) (m->m_data + e_hlen);
switch (ntohs(ah->ar_op)) {
case ARPOP_REVREQUEST:
printf("reverse ARP request\n");
break;
case ARPOP_REVREPLY:
printf("reverse ARP reply\n");
break;
case ARPOP_REQUEST:
printf("ARP request\n");
break;
case ARPOP_REPLY:
printf("ARP reply\n");
break;
default:
printf("other ARP operation\n");
}
break;
default:
BXE_PRINTF("----: Other protocol.\n");
}
BXE_PRINTF(
"-----------------------------"
"--------------"
"-----------------------------\n");
}
#if 0
static void
bxe_dump_mbuf_data(struct mbuf *m, int len)
{
uint8_t *ptr;
int i;
ptr = mtod(m, uint8_t *);
printf("\nmbuf->m_data:");
printf("\n0x");
for (i = 0; i < len; i++){
if (i != 0 && i % 40 == 0)
printf("\n0x");
else if (i != 0 && i % 6 == 0)
printf(" 0x");
printf("%02x", *ptr++);
}
printf("\n\n");
}
#endif
/*
* Prints out information about an mbuf.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_mbuf(struct bxe_softc *sc, struct mbuf *m)
{
if (m == NULL) {
BXE_PRINTF("mbuf: null pointer\n");
return;
}
while (m) {
BXE_PRINTF("mbuf: %p, m_len = %d, m_flags = 0x%b, "
"m_data = %p\n", m, m->m_len, m->m_flags,
"\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY", m->m_data);
if (m->m_flags & M_PKTHDR) {
BXE_PRINTF("- m_pkthdr: len = %d, flags = 0x%b, "
"csum_flags = %b\n", m->m_pkthdr.len,
m->m_flags, "\20\12M_BCAST\13M_MCAST\14M_FRAG"
"\15M_FIRSTFRAG\16M_LASTFRAG\21M_VLANTAG"
"\22M_PROMISC\23M_NOFREE",
m->m_pkthdr.csum_flags,
"\20\1CSUM_IP\2CSUM_TCP\3CSUM_UDP\4CSUM_IP_FRAGS"
"\5CSUM_FRAGMENT\6CSUM_TSO\11CSUM_IP_CHECKED"
"\12CSUM_IP_VALID\13CSUM_DATA_VALID"
"\14CSUM_PSEUDO_HDR");
}
if (m->m_flags & M_EXT) {
BXE_PRINTF("- m_ext: %p, ext_size = %d, type = ",
m->m_ext.ext_buf, m->m_ext.ext_size);
switch (m->m_ext.ext_type) {
case EXT_CLUSTER:
printf("EXT_CLUSTER\n"); break;
case EXT_SFBUF:
printf("EXT_SFBUF\n"); break;
case EXT_JUMBO9:
printf("EXT_JUMBO9\n"); break;
case EXT_JUMBO16:
printf("EXT_JUMBO16\n"); break;
case EXT_PACKET:
printf("EXT_PACKET\n"); break;
case EXT_MBUF:
printf("EXT_MBUF\n"); break;
case EXT_NET_DRV:
printf("EXT_NET_DRV\n"); break;
case EXT_MOD_TYPE:
printf("EXT_MOD_TYPE\n"); break;
case EXT_DISPOSABLE:
printf("EXT_DISPOSABLE\n"); break;
case EXT_EXTREF:
printf("EXT_EXTREF\n"); break;
default:
printf("UNKNOWN\n");
}
}
m = m->m_next;
}
}
/*
* Prints out information about an rx_bd.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_rxbd(struct bxe_fastpath *fp, int idx,
struct eth_rx_bd *rx_bd)
{
struct bxe_softc *sc;
sc = fp->sc;
/* Check if index out of range. */
if (idx > MAX_RX_BD) {
BXE_PRINTF("fp[%02d].rx_bd[0x%04X] XX: Invalid rx_bd index!\n",
fp->index, idx);
} else if ((idx & RX_BD_PER_PAGE_MASK) >= USABLE_RX_BD_PER_PAGE) {
/* RX Chain page pointer. */
BXE_PRINTF("fp[%02d].rx_bd[0x%04X] NP: haddr=0x%08X:%08X\n",
fp->index, idx, rx_bd->addr_hi, rx_bd->addr_lo);
} else {
BXE_PRINTF("fp[%02d].rx_bd[0x%04X] RX: haddr=0x%08X:%08X\n",
fp->index, idx, rx_bd->addr_hi, rx_bd->addr_lo);
}
}
/*
* Prints out a completion queue entry.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_cqe(struct bxe_fastpath *fp, int idx,
union eth_rx_cqe *cqe)
{
struct bxe_softc *sc;
sc = fp->sc;
if (idx > MAX_RCQ_ENTRIES) {
/* Index out of range. */
BXE_PRINTF("fp[%02d].rx_cqe[0x%04X]: Invalid rx_cqe index!\n",
fp->index, idx);
} else if ((idx & USABLE_RCQ_ENTRIES_PER_PAGE) ==
USABLE_RCQ_ENTRIES_PER_PAGE) {
/* CQE next page pointer. */
BXE_PRINTF("fp[%02d].rx_cqe[0x%04X] NP: haddr=0x%08X:%08X\n",
fp->index, idx,
le32toh(cqe->next_page_cqe.addr_hi),
le32toh(cqe->next_page_cqe.addr_lo));
} else {
/* Normal CQE. */
BXE_PRINTF("fp[%02d].rx_cqe[0x%04X] CQ: error_flags=0x%b, "
"pkt_len=0x%04X, status_flags=0x%02X, vlan=0x%04X "
"rss_hash=0x%08X\n", fp->index, idx,
cqe->fast_path_cqe.type_error_flags,
BXE_ETH_FAST_PATH_RX_CQE_ERROR_FLAGS_PRINTFB,
le16toh(cqe->fast_path_cqe.pkt_len),
cqe->fast_path_cqe.status_flags,
le16toh(cqe->fast_path_cqe.vlan_tag),
le32toh(cqe->fast_path_cqe.rss_hash_result));
}
}
/*
* Prints out information about a TX parsing BD.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_tx_parsing_bd(struct bxe_fastpath *fp, int idx,
struct eth_tx_parse_bd *p_bd)
{
struct bxe_softc *sc;
sc = fp->sc;
if (idx > MAX_TX_BD){
/* Index out of range. */
BXE_PRINTF("fp[%02d].tx_bd[0x%04X] XX: Invalid tx_bd index!\n",
fp->index, idx);
} else {
BXE_PRINTF("fp[%02d]:tx_bd[0x%04X] PB: global_data=0x%b, "
"tcp_flags=0x%b, ip_hlen=%04d, total_hlen=%04d, "
"tcp_pseudo_csum=0x%04X, lso_mss=0x%04X, ip_id=0x%04X, "
"tcp_send_seq=0x%08X\n", fp->index, idx,
p_bd->global_data, BXE_ETH_TX_PARSE_BD_GLOBAL_DATA_PRINTFB,
p_bd->tcp_flags, BXE_ETH_TX_PARSE_BD_TCP_FLAGS_PRINTFB,
p_bd->ip_hlen, p_bd->total_hlen, p_bd->tcp_pseudo_csum,
p_bd->lso_mss, p_bd->ip_id, p_bd->tcp_send_seq);
}
}
/*
* Prints out information about a tx_bd.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_txbd(struct bxe_fastpath *fp, int idx,
union eth_tx_bd_types *tx_bd)
{
struct bxe_softc *sc;
sc = fp->sc;
if (idx > MAX_TX_BD){
/* Index out of range. */
BXE_PRINTF("fp[%02d]:tx_bd[0x%04X] XX: Invalid tx_bd index!\n",
fp->index, idx);
} else if ((idx & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE) {
/* TX next page BD. */
BXE_PRINTF("fp[%02d]:tx_bd[0x%04X] NP: haddr=0x%08X:%08X\n",
fp->index, idx, tx_bd->next_bd.addr_hi,
tx_bd->next_bd.addr_lo);
} else if ((tx_bd->start_bd.bd_flags.as_bitfield &
ETH_TX_BD_FLAGS_START_BD) != 0) {
/* TX start BD. */
BXE_PRINTF("fp[%02d]:tx_bd[0x%04X] ST: haddr=0x%08X:%08X, "
"nbd=%02d, nbytes=%05d, vlan/idx=0x%04X, flags=0x%b, "
"gendata=0x%02X\n",
fp->index, idx, tx_bd->start_bd.addr_hi,
tx_bd->start_bd.addr_lo, tx_bd->start_bd.nbd,
tx_bd->start_bd.nbytes, tx_bd->start_bd.vlan,
tx_bd->start_bd.bd_flags.as_bitfield,
BXE_ETH_TX_BD_FLAGS_PRINTFB,
tx_bd->start_bd.general_data);
} else {
/* Regular TX BD. */
BXE_PRINTF("fp[%02d]:tx_bd[0x%04X] TX: haddr=0x%08X:%08X, "
"total_pkt_bytes=%05d, nbytes=%05d\n", fp->index, idx,
tx_bd->reg_bd.addr_hi, tx_bd->reg_bd.addr_lo,
tx_bd->reg_bd.total_pkt_bytes, tx_bd->reg_bd.nbytes);
}
}
/*
* Prints out the transmit chain.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_tx_chain(struct bxe_fastpath * fp, int tx_bd_prod, int count)
{
struct bxe_softc *sc;
union eth_tx_bd_types *tx_bd;
uint32_t val_hi, val_lo;
int i, parsing_bd = 0;
sc = fp->sc;
/* First some info about the tx_bd chain structure. */
BXE_PRINTF(
"----------------------------"
" tx_bd chain "
"----------------------------\n");
val_hi = U64_HI(fp->tx_dma.paddr);
val_lo = U64_LO(fp->tx_dma.paddr);
BXE_PRINTF(
"0x%08X:%08X - (fp[%02d]->tx_dma.paddr) TX Chain physical address\n",
val_hi, val_lo, fp->index);
BXE_PRINTF(
"page size = 0x%08X, tx chain pages = 0x%08X\n",
(uint32_t)BCM_PAGE_SIZE, (uint32_t)NUM_TX_PAGES);
BXE_PRINTF(
"tx_bd per page = 0x%08X, usable tx_bd per page = 0x%08X\n",
(uint32_t)TOTAL_TX_BD_PER_PAGE, (uint32_t)USABLE_TX_BD_PER_PAGE);
BXE_PRINTF(
"total tx_bd = 0x%08X\n", (uint32_t)TOTAL_TX_BD);
BXE_PRINTF(
"-----------------------------"
" tx_bd data "
"-----------------------------\n");
/* Now print out the tx_bd's themselves. */
for (i = 0; i < count; i++) {
tx_bd = &fp->tx_chain[tx_bd_prod];
if (parsing_bd) {
struct eth_tx_parse_bd *p_bd;
p_bd = (struct eth_tx_parse_bd *)
&fp->tx_chain[tx_bd_prod].parse_bd;
bxe_dump_tx_parsing_bd(fp, tx_bd_prod, p_bd);
parsing_bd = 0;
} else {
bxe_dump_txbd(fp, tx_bd_prod, tx_bd);
if ((tx_bd->start_bd.bd_flags.as_bitfield &
ETH_TX_BD_FLAGS_START_BD) != 0)
/*
* There is always a parsing BD following the
* tx_bd with the start bit set.
*/
parsing_bd = 1;
}
/* Don't skip next page pointers. */
tx_bd_prod = ((tx_bd_prod + 1) & MAX_TX_BD);
}
BXE_PRINTF(
"-----------------------------"
"--------------"
"-----------------------------\n");
}
/*
* Prints out the receive completion queue chain.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_rx_cq_chain(struct bxe_fastpath *fp, int rx_cq_prod, int count)
{
struct bxe_softc *sc;
union eth_rx_cqe *cqe;
int i;
sc = fp->sc;
/* First some info about the tx_bd chain structure. */
BXE_PRINTF(
"----------------------------"
" CQE Chain "
"----------------------------\n");
BXE_PRINTF("fp[%02d]->rcq_dma.paddr = 0x%jX\n",
fp->index, (uintmax_t) fp->rcq_dma.paddr);
BXE_PRINTF("page size = 0x%08X, cq chain pages "
" = 0x%08X\n",
(uint32_t)BCM_PAGE_SIZE, (uint32_t) NUM_RCQ_PAGES);
BXE_PRINTF("cqe_bd per page = 0x%08X, usable cqe_bd per "
"page = 0x%08X\n",
(uint32_t) TOTAL_RCQ_ENTRIES_PER_PAGE,
(uint32_t) USABLE_RCQ_ENTRIES_PER_PAGE);
BXE_PRINTF("total cqe_bd = 0x%08X\n",(uint32_t) TOTAL_RCQ_ENTRIES);
/* Now the CQE entries themselves. */
BXE_PRINTF(
"----------------------------"
" CQE Data "
"----------------------------\n");
for (i = 0; i < count; i++) {
cqe = (union eth_rx_cqe *)&fp->rcq_chain[rx_cq_prod];
bxe_dump_cqe(fp, rx_cq_prod, cqe);
/* Don't skip next page pointers. */
rx_cq_prod = ((rx_cq_prod + 1) & MAX_RCQ_ENTRIES);
}
BXE_PRINTF(
"----------------------------"
"--------------"
"----------------------------\n");
}
/*
* Prints out the receive chain.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_rx_bd_chain(struct bxe_fastpath *fp, int prod, int count)
{
struct bxe_softc *sc;
struct eth_rx_bd *rx_bd;
struct mbuf *m;
int i;
sc = fp->sc;
/* First some info about the tx_bd chain structure. */
BXE_PRINTF(
"----------------------------"
" rx_bd chain "
"----------------------------\n");
BXE_PRINTF(
"----- RX_BD Chain -----\n");
BXE_PRINTF("fp[%02d]->rx_dma.paddr = 0x%jX\n",
fp->index, (uintmax_t) fp->rx_dma.paddr);
BXE_PRINTF(
"page size = 0x%08X, rx chain pages = 0x%08X\n",
(uint32_t)BCM_PAGE_SIZE, (uint32_t)NUM_RX_PAGES);
BXE_PRINTF(
"rx_bd per page = 0x%08X, usable rx_bd per page = 0x%08X\n",
(uint32_t)TOTAL_RX_BD_PER_PAGE, (uint32_t)USABLE_RX_BD_PER_PAGE);
BXE_PRINTF(
"total rx_bd = 0x%08X\n", (uint32_t)TOTAL_RX_BD);
/* Now the rx_bd entries themselves. */
BXE_PRINTF(
"----------------------------"
" rx_bd data "
"----------------------------\n");
/* Now print out the rx_bd's themselves. */
for (i = 0; i < count; i++) {
rx_bd = (struct eth_rx_bd *) (&fp->rx_chain[prod]);
m = sc->fp->rx_mbuf_ptr[prod];
bxe_dump_rxbd(fp, prod, rx_bd);
bxe_dump_mbuf(sc, m);
/* Don't skip next page pointers. */
prod = ((prod + 1) & MAX_RX_BD);
}
BXE_PRINTF(
"----------------------------"
"--------------"
"----------------------------\n");
}
/*
* Prints out a register dump.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_hw_state(struct bxe_softc *sc)
{
int i;
BXE_PRINTF(
"----------------------------"
" Hardware State "
"----------------------------\n");
for (i = 0x2000; i < 0x10000; i += 0x10)
BXE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n", i,
REG_RD(sc, 0 + i), REG_RD(sc, 0 + i + 0x4),
REG_RD(sc, 0 + i + 0x8), REG_RD(sc, 0 + i + 0xC));
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* Prints out the RX mbuf chain.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_rx_mbuf_chain(struct bxe_softc *sc, int chain_prod, int count)
{
struct mbuf *m;
int i;
BXE_PRINTF(
"----------------------------"
" rx mbuf data "
"----------------------------\n");
for (i = 0; i < count; i++) {
m = sc->fp->rx_mbuf_ptr[chain_prod];
BXE_PRINTF("rxmbuf[0x%04X]\n", chain_prod);
bxe_dump_mbuf(sc, m);
chain_prod = RX_BD(NEXT_RX_BD(chain_prod));
}
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* Prints out the mbufs in the TX mbuf chain.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_tx_mbuf_chain(struct bxe_softc *sc, int chain_prod, int count)
{
struct mbuf *m;
int i;
BXE_PRINTF(
"----------------------------"
" tx mbuf data "
"----------------------------\n");
for (i = 0; i < count; i++) {
m = sc->fp->tx_mbuf_ptr[chain_prod];
BXE_PRINTF("txmbuf[%d]\n", chain_prod);
bxe_dump_mbuf(sc, m);
chain_prod = TX_BD(NEXT_TX_BD(chain_prod));
}
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* Prints out the status block from host memory.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_status_block(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
struct host_def_status_block *def_sb;
struct host_status_block *fpsb;
int i;
def_sb = sc->def_sb;
BXE_PRINTF(
"----------------------------"
" Status Block "
"----------------------------\n");
for (i = 0; i < sc->num_queues; i++) {
fp = &sc->fp[i];
fpsb = fp->status_block;
BXE_PRINTF(
"----------------------------"
" fp[%02d] "
"----------------------------\n", fp->index);
/* Print the USTORM fields (HC_USTORM_SB_NUM_INDICES). */
BXE_PRINTF(
"0x%08X - USTORM Flags (F/W RESERVED)\n",
fpsb->u_status_block.__flags);
BXE_PRINTF(
" 0x%02X - USTORM PCIe Function\n",
fpsb->u_status_block.func);
BXE_PRINTF(
" 0x%02X - USTORM Status Block ID\n",
fpsb->u_status_block.status_block_id);
BXE_PRINTF(
" 0x%04X - USTORM Status Block Index (Tag)\n",
fpsb->u_status_block.status_block_index);
BXE_PRINTF(
" 0x%04X - USTORM [TOE_RX_CQ_CONS]\n",
fpsb->u_status_block.index_values[HC_INDEX_U_TOE_RX_CQ_CONS]);
BXE_PRINTF(
" 0x%04X - USTORM [ETH_RX_CQ_CONS]\n",
fpsb->u_status_block.index_values[HC_INDEX_U_ETH_RX_CQ_CONS]);
BXE_PRINTF(
" 0x%04X - USTORM [ETH_RX_BD_CONS]\n",
fpsb->u_status_block.index_values[HC_INDEX_U_ETH_RX_BD_CONS]);
BXE_PRINTF(
" 0x%04X - USTORM [RESERVED]\n",
fpsb->u_status_block.index_values[3]);
/* Print the CSTORM fields (HC_CSTORM_SB_NUM_INDICES). */
BXE_PRINTF(
"0x%08X - CSTORM Flags (F/W RESERVED)\n",
fpsb->c_status_block.__flags);
BXE_PRINTF(
" 0x%02X - CSTORM PCIe Function\n",
fpsb->c_status_block.func);
BXE_PRINTF(
" 0x%02X - CSTORM Status Block ID\n",
fpsb->c_status_block.status_block_id);
BXE_PRINTF(
" 0x%04X - CSTORM Status Block Index (Tag)\n",
fpsb->c_status_block.status_block_index);
BXE_PRINTF(
" 0x%04X - CSTORM [TOE_TX_CQ_CONS]\n",
fpsb->c_status_block.index_values[HC_INDEX_C_TOE_TX_CQ_CONS]);
BXE_PRINTF(
" 0x%04X - CSTORM [ETH_TX_CQ_CONS]\n",
fpsb->c_status_block.index_values[HC_INDEX_C_ETH_TX_CQ_CONS]);
BXE_PRINTF(
" 0x%04X - CSTORM [ISCSI_EQ_CONS]\n",
fpsb->c_status_block.index_values[HC_INDEX_C_ISCSI_EQ_CONS]);
BXE_PRINTF(
" 0x%04X - CSTORM [RESERVED]\n",
fpsb->c_status_block.index_values[3]);
}
BXE_PRINTF(
"--------------------------"
" Def Status Block "
"--------------------------\n");
/* Print attention information. */
BXE_PRINTF(
" 0x%02X - Status Block ID\n",
def_sb->atten_status_block.status_block_id);
BXE_PRINTF(
"0x%08X - Attn Bits\n",
def_sb->atten_status_block.attn_bits);
BXE_PRINTF(
"0x%08X - Attn Bits Ack\n",
def_sb->atten_status_block.attn_bits_ack);
BXE_PRINTF(
" 0x%04X - Attn Block Index\n",
le16toh(def_sb->atten_status_block.attn_bits_index));
/* Print the USTORM fields (HC_USTORM_DEF_SB_NUM_INDICES). */
BXE_PRINTF(
" 0x%02X - USTORM Status Block ID\n",
def_sb->u_def_status_block.status_block_id);
BXE_PRINTF(
" 0x%04X - USTORM Status Block Index\n",
le16toh(def_sb->u_def_status_block.status_block_index));
BXE_PRINTF(
" 0x%04X - USTORM [ETH_RDMA_RX_CQ_CONS]\n",
le16toh(def_sb->u_def_status_block.index_values[HC_INDEX_DEF_U_ETH_RDMA_RX_CQ_CONS]));
BXE_PRINTF(
" 0x%04X - USTORM [ETH_ISCSI_RX_CQ_CONS]\n",
le16toh(def_sb->u_def_status_block.index_values[HC_INDEX_DEF_U_ETH_ISCSI_RX_CQ_CONS]));
BXE_PRINTF(
" 0x%04X - USTORM [ETH_RDMA_RX_BD_CONS]\n",
le16toh(def_sb->u_def_status_block.index_values[HC_INDEX_DEF_U_ETH_RDMA_RX_BD_CONS]));
BXE_PRINTF(
" 0x%04X - USTORM [ETH_ISCSI_RX_BD_CONS]\n",
le16toh(def_sb->u_def_status_block.index_values[HC_INDEX_DEF_U_ETH_ISCSI_RX_BD_CONS]));
/* Print the CSTORM fields (HC_CSTORM_DEF_SB_NUM_INDICES). */
BXE_PRINTF(
" 0x%02X - CSTORM Status Block ID\n",
def_sb->c_def_status_block.status_block_id);
BXE_PRINTF(
" 0x%04X - CSTORM Status Block Index\n",
le16toh(def_sb->c_def_status_block.status_block_index));
BXE_PRINTF(
" 0x%04X - CSTORM [RDMA_EQ_CONS]\n",
le16toh(def_sb->c_def_status_block.index_values[HC_INDEX_DEF_C_RDMA_EQ_CONS]));
BXE_PRINTF(
" 0x%04X - CSTORM [RDMA_NAL_PROD]\n",
le16toh(def_sb->c_def_status_block.index_values[HC_INDEX_DEF_C_RDMA_NAL_PROD]));
BXE_PRINTF(
" 0x%04X - CSTORM [ETH_FW_TX_CQ_CONS]\n",
le16toh(def_sb->c_def_status_block.index_values[HC_INDEX_DEF_C_ETH_FW_TX_CQ_CONS]));
BXE_PRINTF(
" 0x%04X - CSTORM [ETH_SLOW_PATH]\n",
le16toh(def_sb->c_def_status_block.index_values[HC_INDEX_DEF_C_ETH_SLOW_PATH]));
BXE_PRINTF(
" 0x%04X - CSTORM [ETH_RDMA_CQ_CONS]\n",
le16toh(def_sb->c_def_status_block.index_values[HC_INDEX_DEF_C_ETH_RDMA_CQ_CONS]));
BXE_PRINTF(
" 0x%04X - CSTORM [ETH_ISCSI_CQ_CONS]\n",
le16toh(def_sb->c_def_status_block.index_values[HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS]));
BXE_PRINTF(
" 0x%04X - CSTORM [UNUSED]\n",
le16toh(def_sb->c_def_status_block.index_values[6]));
BXE_PRINTF(
" 0x%04X - CSTORM [UNUSED]\n",
le16toh(def_sb->c_def_status_block.index_values[7]));
/* Print the TSTORM fields (HC_TSTORM_DEF_SB_NUM_INDICES). */
BXE_PRINTF(
" 0x%02X - TSTORM Status Block ID\n",
def_sb->t_def_status_block.status_block_id);
BXE_PRINTF(
" 0x%04X - TSTORM Status Block Index\n",
le16toh(def_sb->t_def_status_block.status_block_index));
for (i = 0; i < HC_TSTORM_DEF_SB_NUM_INDICES; i++)
BXE_PRINTF(
" 0x%04X - TSTORM [UNUSED]\n",
le16toh(def_sb->t_def_status_block.index_values[i]));
/* Print the XSTORM fields (HC_XSTORM_DEF_SB_NUM_INDICES). */
BXE_PRINTF(
" 0x%02X - XSTORM Status Block ID\n",
def_sb->x_def_status_block.status_block_id);
BXE_PRINTF(
" 0x%04X - XSTORM Status Block Index\n",
le16toh(def_sb->x_def_status_block.status_block_index));
for (i = 0; i < HC_XSTORM_DEF_SB_NUM_INDICES; i++)
BXE_PRINTF(
" 0x%04X - XSTORM [UNUSED]\n",
le16toh(def_sb->x_def_status_block.index_values[i]));
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* Prints out the statistics block from host memory.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_stats_block(struct bxe_softc *sc)
{
}
/*
* Prints out a summary of the fastpath state.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_fp_state(struct bxe_fastpath *fp)
{
struct bxe_softc *sc;
uint32_t val_hi, val_lo;
int i;
sc = fp->sc;
BXE_PRINTF(
"----------------------------"
" Fastpath State "
"----------------------------\n");
val_hi = U64_HI(fp);
val_lo = U64_LO(fp);
BXE_PRINTF(
"0x%08X:%08X - (fp[%02d]) fastpath virtual address\n",
val_hi, val_lo, fp->index);
BXE_PRINTF(
" %3d - (fp[%02d]->sb_id)\n",
fp->sb_id, fp->index);
BXE_PRINTF(
" %3d - (fp[%02d]->cl_id)\n",
fp->cl_id, fp->index);
BXE_PRINTF(
" 0x%08X - (fp[%02d]->state)\n",
(uint32_t)fp->state, fp->index);
/* Receive state. */
BXE_PRINTF(
" 0x%04X - (fp[%02d]->rx_bd_prod)\n",
fp->rx_bd_prod, fp->index);
BXE_PRINTF(
" 0x%04X - (fp[%02d]->rx_bd_cons)\n",
fp->rx_bd_cons, fp->index);
BXE_PRINTF(
" 0x%04X - (fp[%02d]->rx_cq_prod)\n",
fp->rx_cq_prod, fp->index);
BXE_PRINTF(
" 0x%04X - (fp[%02d]->rx_cq_cons)\n",
fp->rx_cq_cons, fp->index);
BXE_PRINTF(
" %16lu - (fp[%02d]->rx_pkts)\n",
fp->rx_pkts, fp->index);
BXE_PRINTF(
" 0x%08X - (fp[%02d]->rx_mbuf_alloc)\n",
fp->rx_mbuf_alloc, fp->index);
BXE_PRINTF(
" %16lu - (fp[%02d]->ipackets)\n",
fp->ipackets, fp->index);
BXE_PRINTF(
" %16lu - (fp[%02d]->rx_soft_errors)\n",
fp->rx_soft_errors, fp->index);
/* Transmit state. */
BXE_PRINTF(
" 0x%04X - (fp[%02d]->tx_bd_used)\n",
fp->tx_bd_used, fp->index);
BXE_PRINTF(
" 0x%04X - (fp[%02d]->tx_bd_prod)\n",
fp->tx_bd_prod, fp->index);
BXE_PRINTF(
" 0x%04X - (fp[%02d]->tx_bd_cons)\n",
fp->tx_bd_cons, fp->index);
BXE_PRINTF(
" 0x%04X - (fp[%02d]->tx_pkt_prod)\n",
fp->tx_pkt_prod, fp->index);
BXE_PRINTF(
" 0x%04X - (fp[%02d]->tx_pkt_cons)\n",
fp->tx_pkt_cons, fp->index);
BXE_PRINTF(
" %16lu - (fp[%02d]->tx_pkts)\n",
fp->tx_pkts, fp->index);
BXE_PRINTF(
" 0x%08X - (fp[%02d]->tx_mbuf_alloc)\n",
fp->tx_mbuf_alloc, fp->index);
BXE_PRINTF(
" %16lu - (fp[%02d]->opackets)\n",
fp->opackets, fp->index);
BXE_PRINTF(
" %16lu - (fp[%02d]->tx_soft_errors)\n",
fp->tx_soft_errors, fp->index);
/* TPA state. */
if (TPA_ENABLED(sc)) {
BXE_PRINTF(
" %16lu - (fp[%02d]->rx_tpa_pkts)\n",
fp->rx_tpa_pkts, fp->index);
BXE_PRINTF(
" 0x%08X - (fp[%02d]->tpa_mbuf_alloc)\n",
fp->tpa_mbuf_alloc, fp->index);
BXE_PRINTF(
" 0x%08X - (fp[%02d]->sge_mbuf_alloc)\n",
fp->sge_mbuf_alloc, fp->index);
if (CHIP_IS_E1(sc)) {
for (i = 0; i < ETH_MAX_AGGREGATION_QUEUES_E1; i++)
BXE_PRINTF(
" 0x%08X - (fp[%02d]->tpa_state[%02d])\n",
(uint32_t)fp->tpa_state[i], fp->index, i);
} else {
for (i = 0; i < ETH_MAX_AGGREGATION_QUEUES_E1; i++)
BXE_PRINTF(
" 0x%08X - (fp[%02d]->tpa_state[%02d])\n",
(uint32_t)fp->tpa_state[i], fp->index, i);
}
}
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_port_state_locked(struct bxe_softc *sc)
{
BXE_PRINTF(
"------------------------------"
" Port State "
"------------------------------\n");
BXE_PRINTF(
" %2d - (port) pmf\n", sc->port.pmf);
BXE_PRINTF(
"0x%08X - (port) link_config\n", sc->port.link_config);
BXE_PRINTF(
"0x%08X - (port) supported\n", sc->port.supported);
BXE_PRINTF(
"0x%08X - (port) advertising\n", sc->port.advertising);
BXE_PRINTF(
"0x%08X - (port) port_stx\n", sc->port.port_stx);
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_link_vars_state_locked(struct bxe_softc *sc)
{
BXE_PRINTF(
"---------------------------"
" Link Vars State "
"----------------------------\n");
switch (sc->link_vars.mac_type) {
case MAC_TYPE_NONE:
BXE_PRINTF(" NONE");
break;
case MAC_TYPE_EMAC:
BXE_PRINTF(" EMAC");
break;
case MAC_TYPE_BMAC:
BXE_PRINTF(" BMAC");
break;
default:
BXE_PRINTF(" UNKN");
}
printf(" - (link_vars->mac_type)\n");
BXE_PRINTF(
" %2d - (link_vars->phy_link_up)\n",
sc->link_vars.phy_link_up);
BXE_PRINTF(
" %2d - (link_vars->link_up)\n",
sc->link_vars.link_up);
BXE_PRINTF(
" %2d - (link_vars->duplex)\n",
sc->link_vars.duplex);
BXE_PRINTF(
" 0x%04X - (link_vars->flow_ctrl)\n",
sc->link_vars.flow_ctrl);
BXE_PRINTF(
" 0x%04X - (link_vars->line_speed)\n",
sc->link_vars.line_speed);
BXE_PRINTF(
"0x%08X - (link_vars->ieee_fc)\n",
sc->link_vars.ieee_fc);
BXE_PRINTF(
"0x%08X - (link_vars->autoneg)\n",
sc->link_vars.autoneg);
BXE_PRINTF(
"0x%08X - (link_vars->phy_flags)\n",
sc->link_vars.phy_flags);
BXE_PRINTF(
"0x%08X - (link_vars->link_status)\n",
sc->link_vars.link_status);
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_link_params_state_locked(struct bxe_softc *sc)
{
BXE_PRINTF(
"--------------------------"
" Link Params State "
"---------------------------\n");
BXE_PRINTF(
" %2d - (link_params->port)\n",
sc->link_params.port);
BXE_PRINTF(
" %2d - (link_params->loopback_mode)\n",
sc->link_params.loopback_mode);
BXE_PRINTF(
" %3d - (link_params->phy_addr)\n",
sc->link_params.phy_addr);
BXE_PRINTF(
" 0x%04X - (link_params->req_duplex)\n",
sc->link_params.req_duplex);
BXE_PRINTF(
" 0x%04X - (link_params->req_flow_ctrl)\n",
sc->link_params.req_flow_ctrl);
BXE_PRINTF(
" 0x%04X - (link_params->req_line_speed)\n",
sc->link_params.req_line_speed);
BXE_PRINTF(
" %5d - (link_params->ether_mtu)\n",
sc->port.ether_mtu);
BXE_PRINTF(
"0x%08X - (link_params->shmem_base) shared memory base address\n",
sc->link_params.shmem_base);
BXE_PRINTF(
"0x%08X - (link_params->speed_cap_mask)\n",
sc->link_params.speed_cap_mask);
BXE_PRINTF(
"0x%08X - (link_params->ext_phy_config)\n",
sc->link_params.ext_phy_config);
BXE_PRINTF(
"0x%08X - (link_params->switch_cfg)\n",
sc->link_params.switch_cfg);
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* Prints out a summary of the driver state.
*
* Returns:
* Nothing.
*/
static __noinline
void bxe_dump_driver_state(struct bxe_softc *sc)
{
uint32_t val_hi, val_lo;
BXE_PRINTF(
"-----------------------------"
" Driver State "
"-----------------------------\n");
val_hi = U64_HI(sc);
val_lo = U64_LO(sc);
BXE_PRINTF(
"0x%08X:%08X - (sc) driver softc structure virtual address\n",
val_hi, val_lo);
val_hi = U64_HI(sc->bxe_vhandle);
val_lo = U64_LO(sc->bxe_vhandle);
BXE_PRINTF(
"0x%08X:%08X - (sc->bxe_vhandle) PCI BAR0 virtual address\n",
val_hi, val_lo);
val_hi = U64_HI(sc->bxe_db_vhandle);
val_lo = U64_LO(sc->bxe_db_vhandle);
BXE_PRINTF(
"0x%08X:%08X - (sc->bxe_db_vhandle) PCI BAR2 virtual address\n",
val_hi, val_lo);
BXE_PRINTF(" 0x%08X - (sc->num_queues) Fastpath queues\n",
sc->num_queues);
BXE_PRINTF(" 0x%08X - (sc->rx_lane_swap) RX XAUI lane swap\n",
sc->rx_lane_swap);
BXE_PRINTF(" 0x%08X - (sc->tx_lane_swap) TX XAUI lane swap\n",
sc->tx_lane_swap);
BXE_PRINTF(" %16lu - (sc->debug_sim_mbuf_alloc_failed)\n",
sc->debug_sim_mbuf_alloc_failed);
BXE_PRINTF(" %16lu - (sc->debug_sim_mbuf_map_failed)\n",
sc->debug_sim_mbuf_map_failed);
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
bxe_dump_port_state_locked(sc);
bxe_dump_link_params_state_locked(sc);
bxe_dump_link_vars_state_locked(sc);
}
/*
* Dump bootcode (MCP) debug buffer to the console.
*
* Returns:
* None
*/
static __noinline
void bxe_dump_fw(struct bxe_softc *sc)
{
uint32_t addr, mark, data[9], offset;
int word;
addr = sc->common.shmem_base - 0x0800 + 4;
mark = REG_RD(sc, addr);
mark = MCP_REG_MCPR_SCRATCH + ((mark + 0x3) & ~0x3) - 0x08000000;
BXE_PRINTF(
"---------------------------"
" MCP Debug Buffer "
"---------------------------\n");
/* Read from "mark" to the end of the buffer. */
for (offset = mark; offset <= sc->common.shmem_base;
offset += (0x8 * 4)) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(sc, offset + 4 * word));
data[8] = 0x0;
printf("%s", (char *) data);
}
/* Read from the start of the buffer to "mark". */
for (offset = addr + 4; offset <= mark; offset += (0x8 * 4)) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(sc, offset + 4 * word));
data[8] = 0x0;
printf("%s", (char *) data);
}
BXE_PRINTF(
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* Decode firmware messages.
*
* Returns:
* None
*/
static void
bxe_decode_mb_msgs(struct bxe_softc *sc, uint32_t drv_mb_header,
uint32_t fw_mb_header)
{
if (drv_mb_header) {
BXE_PRINTF("Driver message is ");
switch (drv_mb_header & DRV_MSG_CODE_MASK) {
case DRV_MSG_CODE_LOAD_REQ:
printf(
"LOAD_REQ (0x%08X)",
(uint32_t)DRV_MSG_CODE_LOAD_REQ);
break;
case DRV_MSG_CODE_LOAD_DONE:
printf(
"LOAD_DONE (0x%08X)",
(uint32_t)DRV_MSG_CODE_LOAD_DONE);
break;
case DRV_MSG_CODE_UNLOAD_REQ_WOL_EN:
printf(
"UNLOAD_REQ_WOL_EN (0x%08X)",
(uint32_t)DRV_MSG_CODE_UNLOAD_REQ_WOL_EN);
break;
case DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS:
printf(
"UNLOAD_REQ_WOL_DIS (0x%08X)",
(uint32_t)DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS);
break;
case DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP:
printf(
"UNLOADREQ_WOL_MCP (0x%08X)",
(uint32_t)DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
break;
case DRV_MSG_CODE_UNLOAD_DONE:
printf(
"UNLOAD_DONE (0x%08X)",
(uint32_t)DRV_MSG_CODE_UNLOAD_DONE);
break;
case DRV_MSG_CODE_DIAG_ENTER_REQ:
printf(
"DIAG_ENTER_REQ (0x%08X)",
(uint32_t)DRV_MSG_CODE_DIAG_ENTER_REQ);
break;
case DRV_MSG_CODE_DIAG_EXIT_REQ:
printf(
"DIAG_EXIT_REQ (0x%08X)",
(uint32_t)DRV_MSG_CODE_DIAG_EXIT_REQ);
break;
case DRV_MSG_CODE_VALIDATE_KEY:
printf(
"CODE_VALIDITY_KEY (0x%08X)",
(uint32_t)DRV_MSG_CODE_VALIDATE_KEY);
break;
case DRV_MSG_CODE_GET_CURR_KEY:
printf(
"GET_CURR_KEY (0x%08X)",
(uint32_t) DRV_MSG_CODE_GET_CURR_KEY);
break;
case DRV_MSG_CODE_GET_UPGRADE_KEY:
printf(
"GET_UPGRADE_KEY (0x%08X)",
(uint32_t)DRV_MSG_CODE_GET_UPGRADE_KEY);
break;
case DRV_MSG_CODE_GET_MANUF_KEY:
printf(
"GET_MANUF_KEY (0x%08X)",
(uint32_t)DRV_MSG_CODE_GET_MANUF_KEY);
break;
case DRV_MSG_CODE_LOAD_L2B_PRAM:
printf(
"LOAD_L2B_PRAM (0x%08X)",
(uint32_t)DRV_MSG_CODE_LOAD_L2B_PRAM);
break;
case BIOS_MSG_CODE_LIC_CHALLENGE:
printf(
"LIC_CHALLENGE (0x%08X)",
(uint32_t)BIOS_MSG_CODE_LIC_CHALLENGE);
break;
case BIOS_MSG_CODE_LIC_RESPONSE:
printf(
"LIC_RESPONSE (0x%08X)",
(uint32_t)BIOS_MSG_CODE_LIC_RESPONSE);
break;
case BIOS_MSG_CODE_VIRT_MAC_PRIM:
printf(
"VIRT_MAC_PRIM (0x%08X)",
(uint32_t)BIOS_MSG_CODE_VIRT_MAC_PRIM);
break;
case BIOS_MSG_CODE_VIRT_MAC_ISCSI:
printf(
"VIRT_MAC_ISCSI (0x%08X)",
(uint32_t)BIOS_MSG_CODE_VIRT_MAC_ISCSI);
break;
default:
printf(
"Unknown command (0x%08X)!",
(drv_mb_header & DRV_MSG_CODE_MASK));
}
printf(" (seq = 0x%04X)\n", (drv_mb_header &
DRV_MSG_SEQ_NUMBER_MASK));
}
if (fw_mb_header) {
BXE_PRINTF("Firmware response is ");
switch (fw_mb_header & FW_MSG_CODE_MASK) {
case FW_MSG_CODE_DRV_LOAD_COMMON:
printf(
"DRV_LOAD_COMMON (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_LOAD_COMMON);
break;
case FW_MSG_CODE_DRV_LOAD_PORT:
printf(
"DRV_LOAD_PORT (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_LOAD_PORT);
break;
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
printf(
"DRV_LOAD_FUNCTION (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_LOAD_FUNCTION);
break;
case FW_MSG_CODE_DRV_LOAD_REFUSED:
printf(
"DRV_LOAD_REFUSED (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_LOAD_REFUSED);
break;
case FW_MSG_CODE_DRV_LOAD_DONE:
printf(
"DRV_LOAD_DONE (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_LOAD_DONE);
break;
case FW_MSG_CODE_DRV_UNLOAD_COMMON:
printf(
"DRV_UNLOAD_COMMON (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_UNLOAD_COMMON);
break;
case FW_MSG_CODE_DRV_UNLOAD_PORT:
printf(
"DRV_UNLOAD_PORT (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_UNLOAD_PORT);
break;
case FW_MSG_CODE_DRV_UNLOAD_FUNCTION:
printf(
"DRV_UNLOAD_FUNCTION (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_UNLOAD_FUNCTION);
break;
case FW_MSG_CODE_DRV_UNLOAD_DONE:
printf(
"DRV_UNLOAD_DONE (0x%08X)",
(uint32_t)FW_MSG_CODE_DRV_UNLOAD_DONE);
break;
case FW_MSG_CODE_DIAG_ENTER_DONE:
printf(
"DIAG_ENTER_DONE (0x%08X)",
(uint32_t)FW_MSG_CODE_DIAG_ENTER_DONE);
break;
case FW_MSG_CODE_DIAG_REFUSE:
printf(
"DIAG_REFUSE (0x%08X)",
(uint32_t)FW_MSG_CODE_DIAG_REFUSE);
break;
case FW_MSG_CODE_DIAG_EXIT_DONE:
printf(
"DIAG_EXIT_DONE (0x%08X)",
(uint32_t)FW_MSG_CODE_DIAG_EXIT_DONE);
break;
case FW_MSG_CODE_VALIDATE_KEY_SUCCESS:
printf(
"VALIDATE_KEY_SUCCESS (0x%08X)",
(uint32_t)FW_MSG_CODE_VALIDATE_KEY_SUCCESS);
break;
case FW_MSG_CODE_VALIDATE_KEY_FAILURE:
printf(
"VALIDATE_KEY_FAILURE (0x%08X)",
(uint32_t)FW_MSG_CODE_VALIDATE_KEY_FAILURE);
break;
case FW_MSG_CODE_GET_KEY_DONE:
printf(
"GET_KEY_DONE (0x%08X)",
(uint32_t)FW_MSG_CODE_GET_KEY_DONE);
break;
case FW_MSG_CODE_NO_KEY:
printf(
"NO_KEY (0x%08X)",
(uint32_t)FW_MSG_CODE_NO_KEY);
break;
default:
printf(
"unknown value (0x%08X)!",
(fw_mb_header & FW_MSG_CODE_MASK));
}
printf(" (seq = 0x%04X)\n", (fw_mb_header &
FW_MSG_SEQ_NUMBER_MASK));
}
}
/*
* Prints a text string for the ramrod command.
*
* Returns:
* None
*/
static void
bxe_decode_ramrod_cmd(struct bxe_softc *sc, int command)
{
BXE_PRINTF("Ramrod command = ");
switch (command) {
case RAMROD_CMD_ID_ETH_PORT_SETUP:
printf("ETH_PORT_SETUP\n");
break;
case RAMROD_CMD_ID_ETH_CLIENT_SETUP:
printf("ETH_CLIENT_SETUP\n");
break;
case RAMROD_CMD_ID_ETH_STAT_QUERY:
printf("ETH_STAT_QUERY\n");
break;
case RAMROD_CMD_ID_ETH_UPDATE:
printf("ETH_UPDATE\n");
break;
case RAMROD_CMD_ID_ETH_HALT:
printf("ETH_HALT\n");
break;
case RAMROD_CMD_ID_ETH_SET_MAC:
printf("ETH_SET_MAC\n");
break;
case RAMROD_CMD_ID_ETH_CFC_DEL:
printf("ETH_CFC_DEL\n");
break;
case RAMROD_CMD_ID_ETH_PORT_DEL:
printf("ETH_PORT_DEL\n");
break;
case RAMROD_CMD_ID_ETH_FORWARD_SETUP:
printf("ETH_FORWARD_SETUP\n");
break;
default:
printf("Unknown ramrod command!\n");
}
}
/*
* Prints out driver information and forces a kernel breakpoint.
*
* Returns:
* Nothing.
*/
static void
bxe_breakpoint(struct bxe_softc *sc)
{
struct bxe_fastpath *fp;
int i;
fp = &sc->fp[0];
/* Unreachable code to silence the compiler about unused functions. */
if (0) {
bxe_reg_read16(sc, PCICFG_OFFSET);
bxe_dump_tx_mbuf_chain(sc, 0, USABLE_TX_BD);
bxe_dump_rx_mbuf_chain(sc, 0, USABLE_RX_BD);
bxe_dump_tx_chain(fp, 0, USABLE_TX_BD);
bxe_dump_rx_cq_chain(fp, 0, USABLE_RCQ_ENTRIES);
bxe_dump_rx_bd_chain(fp, 0, USABLE_RX_BD);
bxe_dump_status_block(sc);
bxe_dump_stats_block(sc);
bxe_dump_fp_state(fp);
bxe_dump_driver_state(sc);
bxe_dump_hw_state(sc);
bxe_dump_fw(sc);
}
/*
* Do some device sanity checking. Run it twice in case
* the hardware is still running so we can identify any
* transient conditions.
*/
bxe_idle_chk(sc); bxe_idle_chk(sc);
bxe_dump_driver_state(sc);
for (i = 0; i < sc->num_queues; i++)
bxe_dump_fp_state(&sc->fp[i]);
bxe_dump_status_block(sc);
bxe_dump_fw(sc);
/* Call the OS debugger. */
breakpoint();
}
#endif