Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/send/@/dev/ie/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/send/@/dev/ie/if_ie.c |
/*- * Copyright (c) 1992, 1993, University of Vermont and State * Agricultural College. * Copyright (c) 1992, 1993, Garrett A. Wollman. * * Portions: * Copyright (c) 1990, 1991, William F. Jolitz * Copyright (c) 1990, The Regents of the University of California * * 3Com 3C507 support: * Copyright (c) 1993, 1994, Charles M. Hannum * * EtherExpress 16 support: * Copyright (c) 1993, 1994, 1995, Rodney W. Grimes * Copyright (c) 1997, Aaron C. Smith * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * Vermont and State Agricultural College and Garrett A. Wollman, by * William F. Jolitz, by the University of California, Berkeley, * Lawrence Berkeley Laboratory, and their contributors, by * Charles M. Hannum, by Rodney W. Grimes, and by Aaron C. Smith. * 4. Neither the names of the Universities nor the names of the authors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OR AUTHORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * MAINTAINER: Matthew N. Dodd <winter@jurai.net> */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/dev/ie/if_ie.c 207554 2010-05-03 07:32:50Z sobomax $"); /* * Intel 82586 Ethernet chip * Register, bit, and structure definitions. * * Written by GAW with reference to the Clarkson Packet Driver code for this * chip written by Russ Nelson and others. * * Intel EtherExpress 16 support from if_ix.c, written by Rodney W. Grimes. */ /* * The i82586 is a very versatile chip, found in many implementations. * Programming this chip is mostly the same, but certain details differ * from card to card. This driver is written so that different cards * can be automatically detected at run-time. */ /* * Mode of operation: * * We run the 82586 in a standard Ethernet mode. We keep NFRAMES * received frame descriptors around for the receiver to use, and * NRXBUFS associated receive buffer descriptors, both in a circular * list. Whenever a frame is received, we rotate both lists as * necessary. (The 586 treats both lists as a simple queue.) We also * keep a transmit command around so that packets can be sent off * quickly. * * We configure the adapter in AL-LOC = 1 mode, which means that the * Ethernet/802.3 MAC header is placed at the beginning of the receive * buffer rather than being split off into various fields in the RFD. * This also means that we must include this header in the transmit * buffer as well. * * By convention, all transmit commands, and only transmit commands, * shall have the I (IE_CMD_INTR) bit set in the command. This way, * when an interrupt arrives at ieintr(), it is immediately possible * to tell what precisely caused it. ANY OTHER command-sending routines * should run at splimp(), and should post an acknowledgement to every * interrupt they generate. * * The 82586 has a 24-bit address space internally, and the adaptor's * memory is located at the top of this region. However, the value * we are given in configuration is normally the *bottom* of the adaptor * RAM. So, we must go through a few gyrations to come up with a * kernel virtual address which represents the actual beginning of the * 586 address space. First, we autosize the RAM by running through * several possible sizes and trying to initialize the adapter under * the assumption that the selected size is correct. Then, knowing * the correct RAM size, we set up our pointers in the softc `iomem' * represents the computed base of the 586 address space. `iomembot' * represents the actual configured base of adapter RAM. Finally, * `iosize' represents the calculated size of 586 RAM. Then, when * laying out commands, we use the interval [iomembot, iomembot + * iosize); to make 24-pointers, we subtract iomem, and to make * 16-pointers, we subtract iomem and and with 0xffff. */ #include <sys/param.h> #include <sys/systm.h> #include <sys/eventhandler.h> #include <sys/kernel.h> #include <sys/malloc.h> #include <sys/mbuf.h> #include <sys/socket.h> #include <sys/sockio.h> #include <sys/syslog.h> #include <sys/module.h> #include <sys/bus.h> #include <machine/bus.h> #include <machine/resource.h> #include <sys/rman.h> #include <net/ethernet.h> #include <net/if.h> #include <net/if_types.h> #include <net/if_dl.h> #include <netinet/in.h> #include <netinet/if_ether.h> #include <dev/ic/i82586.h> #include <dev/ie/if_ievar.h> #include <dev/ie/if_iereg.h> #include <dev/ie/if_ie507.h> #include <dev/ie/if_iee16.h> #include <i386/isa/elink.h> #include <net/bpf.h> #ifdef DEBUG #define IED_RINT 0x01 #define IED_TINT 0x02 #define IED_RNR 0x04 #define IED_CNA 0x08 #define IED_READFRAME 0x10 static int ie_debug = IED_RNR; #endif #define IE_BUF_LEN ETHER_MAX_LEN /* length of transmit buffer */ /* Forward declaration */ struct ie_softc; static void ieinit (void *); static void ieinit_locked (struct ie_softc *); static void ie_stop (struct ie_softc *); static int ieioctl (struct ifnet *, u_long, caddr_t); static void iestart (struct ifnet *); static void iestart_locked (struct ifnet *); static __inline void ee16_interrupt_enable (struct ie_softc *); static void ee16_eeprom_outbits (struct ie_softc *, int, int); static void ee16_eeprom_clock (struct ie_softc *, int); static u_short ee16_read_eeprom (struct ie_softc *, int); static int ee16_eeprom_inbits (struct ie_softc *); static __inline void ie_ack (struct ie_softc *, u_int); static void iereset (struct ie_softc *); static void ie_readframe (struct ie_softc *, int); static void ie_drop_packet_buffer (struct ie_softc *); static void find_ie_mem_size (struct ie_softc *); static int command_and_wait (struct ie_softc *, int, void volatile *, int); static void run_tdr (struct ie_softc *, volatile struct ie_tdr_cmd *); static int ierint (struct ie_softc *); static int ietint (struct ie_softc *); static int iernr (struct ie_softc *); static void start_receiver (struct ie_softc *); static __inline int ieget (struct ie_softc *, struct mbuf **); static v_caddr_t setup_rfa (struct ie_softc *, v_caddr_t); static int mc_setup (struct ie_softc *); static void ie_mc_reset (struct ie_softc *); #ifdef DEBUG static void print_rbd (volatile struct ie_recv_buf_desc * rbd); static int in_ierint = 0; static int in_ietint = 0; #endif static const char *ie_hardware_names[] = { "None", "StarLAN 10", "EN100", "StarLAN Fiber", "3C507", "NI5210", "EtherExpress 16", "Unknown" }; /* * sizeof(iscp) == 1+1+2+4 == 8 * sizeof(scb) == 2+2+2+2+2+2+2+2 == 16 * NFRAMES * sizeof(rfd) == NFRAMES*(2+2+2+2+6+6+2+2) == NFRAMES*24 == 384 * sizeof(xmit_cmd) == 2+2+2+2+6+2 == 18 * sizeof(transmit buffer) == 1512 * sizeof(transmit buffer desc) == 8 * ----- * 1946 * * NRXBUFS * sizeof(rbd) == NRXBUFS*(2+2+4+2+2) == NRXBUFS*12 * NRXBUFS * IE_RBUF_SIZE == NRXBUFS*256 * * NRXBUFS should be (16384 - 1946) / (256 + 12) == 14438 / 268 == 53 * * With NRXBUFS == 48, this leaves us 1574 bytes for another command or * more buffers. Another transmit command would be 18+8+1512 == 1538 * ---just barely fits! * * Obviously all these would have to be reduced for smaller memory sizes. * With a larger memory, it would be possible to roughly double the number * of both transmit and receive buffers. */ #define NFRAMES 4 /* number of receive frames */ #define NRXBUFS 24 /* number of buffers to allocate */ #define IE_RBUF_SIZE 256 /* size of each buffer, MUST BE POWER OF TWO */ #define NTXBUFS 1 /* number of transmit commands */ #define IE_TBUF_SIZE ETHER_MAX_LEN /* size of transmit buffer */ #define MK_24(base, ptr) ((caddr_t)((uintptr_t)ptr - (uintptr_t)base)) #define MK_16(base, ptr) ((u_short)(uintptr_t)MK_24(base, ptr)) void ee16_shutdown(struct ie_softc *sc) { ee16_reset_586(sc); outb(PORT(sc) + IEE16_ECTRL, IEE16_RESET_ASIC); outb(PORT(sc) + IEE16_ECTRL, 0); } /* * Taken almost exactly from Bill's if_is.c, then modified beyond recognition. */ int ie_attach(device_t dev) { struct ie_softc * sc; struct ifnet * ifp; size_t allocsize; int error, factor; sc = device_get_softc(dev); ifp = sc->ifp = if_alloc(IFT_ETHER); if (ifp == NULL) { device_printf(sc->dev, "can not if_alloc()\n"); return (ENOSPC); } sc->dev = dev; mtx_init(&sc->lock, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF); /* * based on the amount of memory we have, allocate our tx and rx * resources. */ factor = rman_get_size(sc->mem_res) / 8192; sc->nframes = factor * NFRAMES; sc->nrxbufs = factor * NRXBUFS; sc->ntxbufs = factor * NTXBUFS; /* * Since all of these guys are arrays of pointers, allocate as one * big chunk and dole out accordingly. */ allocsize = sizeof(void *) * (sc->nframes + (sc->nrxbufs * 2) + (sc->ntxbufs * 3)); sc->rframes = (volatile struct ie_recv_frame_desc **) malloc(allocsize, M_DEVBUF, M_NOWAIT); if (sc->rframes == NULL) { mtx_destroy(&sc->lock); return (ENXIO); } sc->rbuffs = (volatile struct ie_recv_buf_desc **)&sc->rframes[sc->nframes]; sc->cbuffs = (volatile u_char **)&sc->rbuffs[sc->nrxbufs]; sc->xmit_cmds = (volatile struct ie_xmit_cmd **)&sc->cbuffs[sc->nrxbufs]; sc->xmit_buffs = (volatile struct ie_xmit_buf **)&sc->xmit_cmds[sc->ntxbufs]; sc->xmit_cbuffs = (volatile u_char **)&sc->xmit_buffs[sc->ntxbufs]; if (bootverbose) device_printf(sc->dev, "hardware type %s, revision %d\n", ie_hardware_names[sc->hard_type], sc->hard_vers + 1); ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_start = iestart; ifp->if_ioctl = ieioctl; ifp->if_init = ieinit; IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen); ether_ifattach(ifp, sc->enaddr); error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE, NULL, ie_intr, sc, &sc->irq_ih); if (error) { device_printf(dev, "Unable to register interrupt handler\n"); mtx_destroy(&sc->lock); return (error); } return (0); } static __inline void ie_ack(struct ie_softc *sc, u_int mask) { sc->scb->ie_command = sc->scb->ie_status & mask; (*sc->ie_chan_attn) (sc); } /* * What to do upon receipt of an interrupt. */ void ie_intr(void *xsc) { struct ie_softc *sc = (struct ie_softc *)xsc; u_short status; IE_LOCK(sc); /* Clear the interrupt latch on the 3C507. */ if (sc->hard_type == IE_3C507 && (inb(PORT(sc) + IE507_CTRL) & EL_CTRL_INTL)) outb(PORT(sc) + IE507_ICTRL, 1); /* disable interrupts on the EE16. */ if (sc->hard_type == IE_EE16) outb(PORT(sc) + IEE16_IRQ, sc->irq_encoded); status = sc->scb->ie_status; loop: /* Don't ack interrupts which we didn't receive */ ie_ack(sc, IE_ST_WHENCE & status); if (status & (IE_ST_RECV | IE_ST_RNR)) { #ifdef DEBUG in_ierint++; if (ie_debug & IED_RINT) if_printf(sc->ifp, "rint\n"); #endif ierint(sc); #ifdef DEBUG in_ierint--; #endif } if (status & IE_ST_DONE) { #ifdef DEBUG in_ietint++; if (ie_debug & IED_TINT) if_printf(sc->ifp, "tint\n"); #endif ietint(sc); #ifdef DEBUG in_ietint--; #endif } if (status & IE_ST_RNR) { #ifdef DEBUG if (ie_debug & IED_RNR) if_printf(sc->ifp, "rnr\n"); #endif iernr(sc); } #ifdef DEBUG if ((status & IE_ST_ALLDONE) && (ie_debug & IED_CNA)) if_printf(sc->ifp, "cna\n"); #endif if ((status = sc->scb->ie_status) & IE_ST_WHENCE) goto loop; /* Clear the interrupt latch on the 3C507. */ if (sc->hard_type == IE_3C507) outb(PORT(sc) + IE507_ICTRL, 1); /* enable interrupts on the EE16. */ if (sc->hard_type == IE_EE16) outb(PORT(sc) + IEE16_IRQ, sc->irq_encoded | IEE16_IRQ_ENABLE); IE_UNLOCK(sc); } /* * Process a received-frame interrupt. */ static int ierint(struct ie_softc *sc) { int i, status; static int timesthru = 1024; i = sc->rfhead; while (1) { status = sc->rframes[i]->ie_fd_status; if ((status & IE_FD_COMPLETE) && (status & IE_FD_OK)) { sc->ifp->if_ipackets++; if (!--timesthru) { sc->ifp->if_ierrors += sc->scb->ie_err_crc + sc->scb->ie_err_align + sc->scb->ie_err_resource + sc->scb->ie_err_overrun; sc->scb->ie_err_crc = 0; sc->scb->ie_err_align = 0; sc->scb->ie_err_resource = 0; sc->scb->ie_err_overrun = 0; timesthru = 1024; } ie_readframe(sc, i); } else { if (status & IE_FD_RNR) { if (!(sc->scb->ie_status & IE_RU_READY)) { sc->rframes[0]->ie_fd_next = MK_16(MEM(sc), sc->rbuffs[0]); sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]); command_and_wait(sc, IE_RU_START, 0, 0); } } break; } i = (i + 1) % sc->nframes; } return (0); } /* * Process a command-complete interrupt. These are only generated by * the transmission of frames. This routine is deceptively simple, since * most of the real work is done by iestart(). */ static int ietint(struct ie_softc *sc) { struct ifnet *ifp = sc->ifp; int status; int i; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; for (i = 0; i < sc->xmit_count; i++) { status = sc->xmit_cmds[i]->ie_xmit_status; if (status & IE_XS_LATECOLL) { if_printf(ifp, "late collision\n"); ifp->if_collisions++; ifp->if_oerrors++; } else if (status & IE_XS_NOCARRIER) { if_printf(ifp, "no carrier\n"); ifp->if_oerrors++; } else if (status & IE_XS_LOSTCTS) { if_printf(ifp, "lost CTS\n"); ifp->if_oerrors++; } else if (status & IE_XS_UNDERRUN) { if_printf(ifp, "DMA underrun\n"); ifp->if_oerrors++; } else if (status & IE_XS_EXCMAX) { if_printf(ifp, "too many collisions\n"); ifp->if_collisions += 16; ifp->if_oerrors++; } else { ifp->if_opackets++; ifp->if_collisions += status & IE_XS_MAXCOLL; } } sc->xmit_count = 0; /* * If multicast addresses were added or deleted while we were * transmitting, ie_mc_reset() set the want_mcsetup flag indicating * that we should do it. */ if (sc->want_mcsetup) { mc_setup(sc); sc->want_mcsetup = 0; } /* Wish I knew why this seems to be necessary... */ sc->xmit_cmds[0]->ie_xmit_status |= IE_STAT_COMPL; iestart_locked(ifp); return (0); /* shouldn't be necessary */ } /* * Process a receiver-not-ready interrupt. I believe that we get these * when there aren't enough buffers to go around. For now (FIXME), we * just restart the receiver, and hope everything's ok. */ static int iernr(struct ie_softc *sc) { #ifdef doesnt_work setup_rfa(sc, (v_caddr_t) sc->rframes[0]); sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]); command_and_wait(sc, IE_RU_START, 0, 0); #else /* This doesn't work either, but it doesn't hang either. */ command_and_wait(sc, IE_RU_DISABLE, 0, 0); /* just in case */ setup_rfa(sc, (v_caddr_t) sc->rframes[0]); /* ignore cast-qual */ sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]); command_and_wait(sc, IE_RU_START, 0, 0); /* was ENABLE */ #endif ie_ack(sc, IE_ST_WHENCE); sc->ifp->if_ierrors++; return (0); } /* * Compare two Ether/802 addresses for equality, inlined and * unrolled for speed. I'd love to have an inline assembler * version of this... */ static __inline int ether_equal(u_char * one, u_char * two) { if (one[0] != two[0]) return (0); if (one[1] != two[1]) return (0); if (one[2] != two[2]) return (0); if (one[3] != two[3]) return (0); if (one[4] != two[4]) return (0); if (one[5] != two[5]) return (0); return 1; } /* * Determine quickly whether we should bother reading in this packet. * This depends on whether BPF and/or bridging is enabled, whether we * are receiving multicast address, and whether promiscuous mode is enabled. * We assume that if IFF_PROMISC is set, then *somebody* wants to see * all incoming packets. */ static __inline int check_eh(struct ie_softc *sc, struct ether_header *eh) { /* Optimize the common case: normal operation. We've received either a unicast with our dest or a multicast packet. */ if (sc->promisc == 0) { int i; /* If not multicast, it's definitely for us */ if ((eh->ether_dhost[0] & 1) == 0) return (1); /* Accept broadcasts (loose but fast check) */ if (eh->ether_dhost[0] == 0xff) return (1); /* Compare against our multicast addresses */ for (i = 0; i < sc->mcast_count; i++) { if (ether_equal(eh->ether_dhost, (u_char *)&sc->mcast_addrs[i])) return (1); } return (0); } /* Always accept packets when in promiscuous mode */ if ((sc->promisc & IFF_PROMISC) != 0) return (1); /* Always accept packets directed at us */ if (ether_equal(eh->ether_dhost, IF_LLADDR(sc->ifp))) return (1); /* Must have IFF_ALLMULTI but not IFF_PROMISC set. The chip is actually in promiscuous mode, so discard unicast packets. */ return((eh->ether_dhost[0] & 1) != 0); } /* * We want to isolate the bits that have meaning... This assumes that * IE_RBUF_SIZE is an even power of two. If somehow the act_len exceeds * the size of the buffer, then we are screwed anyway. */ static __inline int ie_buflen(struct ie_softc *sc, int head) { return (sc->rbuffs[head]->ie_rbd_actual & (IE_RBUF_SIZE | (IE_RBUF_SIZE - 1))); } static __inline int ie_packet_len(struct ie_softc *sc) { int i; int head = sc->rbhead; int acc = 0; do { if (!(sc->rbuffs[sc->rbhead]->ie_rbd_actual & IE_RBD_USED)) { #ifdef DEBUG print_rbd(sc->rbuffs[sc->rbhead]); #endif log(LOG_ERR, "%s: receive descriptors out of sync at %d\n", sc->ifp->if_xname, sc->rbhead); iereset(sc); return (-1); } i = sc->rbuffs[head]->ie_rbd_actual & IE_RBD_LAST; acc += ie_buflen(sc, head); head = (head + 1) % sc->nrxbufs; } while (!i); return (acc); } /* * Read data off the interface, and turn it into an mbuf chain. * * This code is DRAMATICALLY different from the previous version; this * version tries to allocate the entire mbuf chain up front, given the * length of the data available. This enables us to allocate mbuf * clusters in many situations where before we would have had a long * chain of partially-full mbufs. This should help to speed up the * operation considerably. (Provided that it works, of course.) */ static __inline int ieget(struct ie_softc *sc, struct mbuf **mp) { struct ether_header eh; struct mbuf *m, *top, **mymp; int offset; int totlen, resid; int thismboff; int head; totlen = ie_packet_len(sc); if (totlen <= 0) return (-1); /* * Snarf the Ethernet header. */ bcopy(sc->cbuffs[sc->rbhead], &eh, sizeof(struct ether_header)); /* ignore cast-qual warning here */ /* * As quickly as possible, check if this packet is for us. If not, * don't waste a single cycle copying the rest of the packet in. * This is only a consideration when FILTER is defined; i.e., when * we are either running BPF or doing multicasting. */ if (!check_eh(sc, &eh)) { ie_drop_packet_buffer(sc); sc->ifp->if_ierrors--; /* just this case, it's not an * error */ return (-1); } MGETHDR(m, M_DONTWAIT, MT_DATA); if (!m) { ie_drop_packet_buffer(sc); /* XXXX if_ierrors++; */ return (-1); } *mp = m; m->m_pkthdr.rcvif = sc->ifp; m->m_len = MHLEN; resid = m->m_pkthdr.len = totlen; top = 0; mymp = ⊤ /* * This loop goes through and allocates mbufs for all the data we * will be copying in. It does not actually do the copying yet. */ do { /* while(resid > 0) */ /* * Try to allocate an mbuf to hold the data that we have. * If we already allocated one, just get another one and * stick it on the end (eventually). If we don't already * have one, try to allocate an mbuf cluster big enough to * hold the whole packet, if we think it's reasonable, or a * single mbuf which may or may not be big enough. Got that? */ if (top) { MGET(m, M_DONTWAIT, MT_DATA); if (!m) { m_freem(top); ie_drop_packet_buffer(sc); return (-1); } m->m_len = MLEN; } if (resid >= MINCLSIZE) { MCLGET(m, M_DONTWAIT); if (m->m_flags & M_EXT) m->m_len = min(resid, MCLBYTES); } else { if (resid < m->m_len) { if (!top && resid + max_linkhdr <= m->m_len) m->m_data += max_linkhdr; m->m_len = resid; } } resid -= m->m_len; *mymp = m; mymp = &m->m_next; } while (resid > 0); resid = totlen; /* remaining data */ offset = 0; /* packet offset */ thismboff = 0; /* offset in m */ m = top; /* current mbuf */ head = sc->rbhead; /* current rx buffer */ /* * Now we take the mbuf chain (hopefully only one mbuf most of the * time) and stuff the data into it. There are no possible failures * at or after this point. */ while (resid > 0) { /* while there's stuff left */ int thislen = ie_buflen(sc, head) - offset; /* * If too much data for the current mbuf, then fill the * current one up, go to the next one, and try again. */ if (thislen > m->m_len - thismboff) { int newlen = m->m_len - thismboff; bcopy((v_caddr_t) (sc->cbuffs[head] + offset), mtod(m, caddr_t) +thismboff, (unsigned) newlen); /* ignore cast-qual warning */ m = m->m_next; thismboff = 0; /* new mbuf, so no offset */ offset += newlen; /* we are now this far into * the packet */ resid -= newlen; /* so there is this much left * to get */ continue; } /* * If there is more than enough space in the mbuf to hold * the contents of this buffer, copy everything in, advance * pointers, and so on. */ if (thislen < m->m_len - thismboff) { bcopy((v_caddr_t) (sc->cbuffs[head] + offset), mtod(m, caddr_t) +thismboff, (unsigned) thislen); thismboff += thislen; /* we are this far into the * mbuf */ resid -= thislen; /* and this much is left */ goto nextbuf; } /* * Otherwise, there is exactly enough space to put this * buffer's contents into the current mbuf. Do the * combination of the above actions. */ bcopy((v_caddr_t) (sc->cbuffs[head] + offset), mtod(m, caddr_t) + thismboff, (unsigned) thislen); m = m->m_next; thismboff = 0; /* new mbuf, start at the beginning */ resid -= thislen; /* and we are this far through */ /* * Advance all the pointers. We can get here from either of * the last two cases, but never the first. */ nextbuf: offset = 0; sc->rbuffs[head]->ie_rbd_actual = 0; sc->rbuffs[head]->ie_rbd_length |= IE_RBD_LAST; sc->rbhead = head = (head + 1) % sc->nrxbufs; sc->rbuffs[sc->rbtail]->ie_rbd_length &= ~IE_RBD_LAST; sc->rbtail = (sc->rbtail + 1) % sc->nrxbufs; } /* * Unless something changed strangely while we were doing the copy, * we have now copied everything in from the shared memory. This * means that we are done. */ return (0); } /* * Read frame NUM from unit UNIT (pre-cached as IE). * * This routine reads the RFD at NUM, and copies in the buffers from * the list of RBD, then rotates the RBD and RFD lists so that the receiver * doesn't start complaining. Trailers are DROPPED---there's no point * in wasting time on confusing code to deal with them. Hopefully, * this machine will never ARP for trailers anyway. */ static void ie_readframe(struct ie_softc *sc, int num/* frame number to read */) { struct ifnet *ifp = sc->ifp; struct ie_recv_frame_desc rfd; struct mbuf *m = 0; #ifdef DEBUG struct ether_header *eh; #endif bcopy((v_caddr_t) (sc->rframes[num]), &rfd, sizeof(struct ie_recv_frame_desc)); /* * Immediately advance the RFD list, since we we have copied ours * now. */ sc->rframes[num]->ie_fd_status = 0; sc->rframes[num]->ie_fd_last |= IE_FD_LAST; sc->rframes[sc->rftail]->ie_fd_last &= ~IE_FD_LAST; sc->rftail = (sc->rftail + 1) % sc->nframes; sc->rfhead = (sc->rfhead + 1) % sc->nframes; if (rfd.ie_fd_status & IE_FD_OK) { if (ieget(sc, &m)) { sc->ifp->if_ierrors++; /* this counts as an * error */ return; } } #ifdef DEBUG eh = mtod(m, struct ether_header *); if (ie_debug & IED_READFRAME) { if_printf(ifp, "frame from ether %6D type %x\n", eh->ether_shost, ":", (unsigned) eh->ether_type); } if (ntohs(eh->ether_type) > ETHERTYPE_TRAIL && ntohs(eh->ether_type) < (ETHERTYPE_TRAIL + ETHERTYPE_NTRAILER)) printf("received trailer!\n"); #endif if (!m) return; /* * Finally pass this packet up to higher layers. */ IE_UNLOCK(sc); (*ifp->if_input)(ifp, m); IE_LOCK(sc); } static void ie_drop_packet_buffer(struct ie_softc *sc) { int i; do { /* * This means we are somehow out of sync. So, we reset the * adapter. */ if (!(sc->rbuffs[sc->rbhead]->ie_rbd_actual & IE_RBD_USED)) { #ifdef DEBUG print_rbd(sc->rbuffs[sc->rbhead]); #endif log(LOG_ERR, "%s: receive descriptors out of sync at %d\n", sc->ifp->if_xname, sc->rbhead); iereset(sc); return; } i = sc->rbuffs[sc->rbhead]->ie_rbd_actual & IE_RBD_LAST; sc->rbuffs[sc->rbhead]->ie_rbd_length |= IE_RBD_LAST; sc->rbuffs[sc->rbhead]->ie_rbd_actual = 0; sc->rbhead = (sc->rbhead + 1) % sc->nrxbufs; sc->rbuffs[sc->rbtail]->ie_rbd_length &= ~IE_RBD_LAST; sc->rbtail = (sc->rbtail + 1) % sc->nrxbufs; } while (!i); } /* * Start transmission on an interface. */ static void iestart(struct ifnet *ifp) { struct ie_softc *sc = ifp->if_softc; IE_LOCK(sc); iestart_locked(ifp); IE_UNLOCK(sc); } static void iestart_locked(struct ifnet *ifp) { struct ie_softc *sc = ifp->if_softc; struct mbuf *m0, *m; volatile unsigned char *buffer; u_short len; /* * This is not really volatile, in this routine, but it makes gcc * happy. */ volatile u_short *bptr = &sc->scb->ie_command_list; if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) return; if (ifp->if_drv_flags & IFF_DRV_OACTIVE) return; do { IF_DEQUEUE(&sc->ifp->if_snd, m); if (!m) break; buffer = sc->xmit_cbuffs[sc->xmit_count]; len = 0; for (m0 = m; m && len < IE_BUF_LEN; m = m->m_next) { bcopy(mtod(m, caddr_t), buffer, m->m_len); buffer += m->m_len; len += m->m_len; } m_freem(m0); len = max(len, ETHER_MIN_LEN); /* * See if bpf is listening on this interface, let it see the * packet before we commit it to the wire. */ BPF_TAP(sc->ifp, (void *)sc->xmit_cbuffs[sc->xmit_count], len); sc->xmit_buffs[sc->xmit_count]->ie_xmit_flags = IE_XMIT_LAST|len; sc->xmit_buffs[sc->xmit_count]->ie_xmit_next = 0xffff; sc->xmit_buffs[sc->xmit_count]->ie_xmit_buf = MK_24(sc->iomem, sc->xmit_cbuffs[sc->xmit_count]); sc->xmit_cmds[sc->xmit_count]->com.ie_cmd_cmd = IE_CMD_XMIT; sc->xmit_cmds[sc->xmit_count]->ie_xmit_status = 0; sc->xmit_cmds[sc->xmit_count]->ie_xmit_desc = MK_16(sc->iomem, sc->xmit_buffs[sc->xmit_count]); *bptr = MK_16(sc->iomem, sc->xmit_cmds[sc->xmit_count]); bptr = &sc->xmit_cmds[sc->xmit_count]->com.ie_cmd_link; sc->xmit_count++; } while (sc->xmit_count < sc->ntxbufs); /* * If we queued up anything for transmission, send it. */ if (sc->xmit_count) { sc->xmit_cmds[sc->xmit_count - 1]->com.ie_cmd_cmd |= IE_CMD_LAST | IE_CMD_INTR; /* * By passing the command pointer as a null, we tell * command_and_wait() to pretend that this isn't an action * command. I wish I understood what was happening here. */ command_and_wait(sc, IE_CU_START, 0, 0); ifp->if_drv_flags |= IFF_DRV_OACTIVE; } return; } /* * Check to see if there's an 82586 out there. */ int check_ie_present(struct ie_softc *sc) { volatile struct ie_sys_conf_ptr *scp; volatile struct ie_int_sys_conf_ptr *iscp; volatile struct ie_sys_ctl_block *scb; u_long realbase; realbase = (uintptr_t) sc->iomembot + sc->iosize - (1 << 24); scp = (volatile struct ie_sys_conf_ptr *) (uintptr_t) (realbase + IE_SCP_ADDR); bzero((volatile char *) scp, sizeof *scp); /* * First we put the ISCP at the bottom of memory; this tests to make * sure that our idea of the size of memory is the same as the * controller's. This is NOT where the ISCP will be in normal * operation. */ iscp = (volatile struct ie_int_sys_conf_ptr *) sc->iomembot; bzero((volatile char *)iscp, sizeof *iscp); scb = (volatile struct ie_sys_ctl_block *) sc->iomembot; bzero((volatile char *)scb, sizeof *scb); scp->ie_bus_use = sc->bus_use; /* 8-bit or 16-bit */ scp->ie_iscp_ptr = (caddr_t) (uintptr_t) ((volatile char *) iscp - (volatile char *) (uintptr_t) realbase); iscp->ie_busy = 1; iscp->ie_scb_offset = MK_16(realbase, scb) + 256; (*sc->ie_reset_586) (sc); (*sc->ie_chan_attn) (sc); DELAY(100); /* wait a while... */ if (iscp->ie_busy) { return (0); } /* * Now relocate the ISCP to its real home, and reset the controller * again. */ iscp = (void *) Align((caddr_t) (uintptr_t) (realbase + IE_SCP_ADDR - sizeof(struct ie_int_sys_conf_ptr))); bzero((volatile char *) iscp, sizeof *iscp); /* ignore cast-qual */ scp->ie_iscp_ptr = (caddr_t) (uintptr_t) ((volatile char *) iscp - (volatile char *) (uintptr_t) realbase); iscp->ie_busy = 1; iscp->ie_scb_offset = MK_16(realbase, scb); (*sc->ie_reset_586) (sc); (*sc->ie_chan_attn) (sc); DELAY(100); if (iscp->ie_busy) { return (0); } sc->iomem = (caddr_t) (uintptr_t) realbase; sc->iscp = iscp; sc->scb = scb; /* * Acknowledge any interrupts we may have caused... */ ie_ack(sc, IE_ST_WHENCE); return (1); } /* * Divine the memory size of ie board UNIT. * Better hope there's nothing important hiding just below the ie card... */ static void find_ie_mem_size(struct ie_softc *sc) { unsigned size; sc->iosize = 0; for (size = 65536; size >= 8192; size -= 8192) { if (check_ie_present(sc)) { return; } } return; } void el_reset_586(struct ie_softc *sc) { outb(PORT(sc) + IE507_CTRL, EL_CTRL_RESET); DELAY(100); outb(PORT(sc) + IE507_CTRL, EL_CTRL_NORMAL); DELAY(100); } void sl_reset_586(struct ie_softc *sc) { outb(PORT(sc) + IEATT_RESET, 0); } void ee16_reset_586(struct ie_softc *sc) { outb(PORT(sc) + IEE16_ECTRL, IEE16_RESET_586); DELAY(100); outb(PORT(sc) + IEE16_ECTRL, 0); DELAY(100); } void el_chan_attn(struct ie_softc *sc) { outb(PORT(sc) + IE507_ATTN, 1); } void sl_chan_attn(struct ie_softc *sc) { outb(PORT(sc) + IEATT_ATTN, 0); } void ee16_chan_attn(struct ie_softc *sc) { outb(PORT(sc) + IEE16_ATTN, 0); } u_short ee16_read_eeprom(struct ie_softc *sc, int location) { int ectrl, edata; ectrl = inb(sc->port + IEE16_ECTRL); ectrl &= IEE16_ECTRL_MASK; ectrl |= IEE16_ECTRL_EECS; outb(sc->port + IEE16_ECTRL, ectrl); ee16_eeprom_outbits(sc, IEE16_EEPROM_READ, IEE16_EEPROM_OPSIZE1); ee16_eeprom_outbits(sc, location, IEE16_EEPROM_ADDR_SIZE); edata = ee16_eeprom_inbits(sc); ectrl = inb(sc->port + IEE16_ECTRL); ectrl &= ~(IEE16_RESET_ASIC | IEE16_ECTRL_EEDI | IEE16_ECTRL_EECS); outb(sc->port + IEE16_ECTRL, ectrl); ee16_eeprom_clock(sc, 1); ee16_eeprom_clock(sc, 0); return edata; } static void ee16_eeprom_outbits(struct ie_softc *sc, int edata, int count) { int ectrl, i; ectrl = inb(sc->port + IEE16_ECTRL); ectrl &= ~IEE16_RESET_ASIC; for (i = count - 1; i >= 0; i--) { ectrl &= ~IEE16_ECTRL_EEDI; if (edata & (1 << i)) { ectrl |= IEE16_ECTRL_EEDI; } outb(sc->port + IEE16_ECTRL, ectrl); DELAY(1); /* eeprom data must be setup for 0.4 uSec */ ee16_eeprom_clock(sc, 1); ee16_eeprom_clock(sc, 0); } ectrl &= ~IEE16_ECTRL_EEDI; outb(sc->port + IEE16_ECTRL, ectrl); DELAY(1); /* eeprom data must be held for 0.4 uSec */ } static int ee16_eeprom_inbits(struct ie_softc *sc) { int ectrl, edata, i; ectrl = inb(sc->port + IEE16_ECTRL); ectrl &= ~IEE16_RESET_ASIC; for (edata = 0, i = 0; i < 16; i++) { edata = edata << 1; ee16_eeprom_clock(sc, 1); ectrl = inb(sc->port + IEE16_ECTRL); if (ectrl & IEE16_ECTRL_EEDO) { edata |= 1; } ee16_eeprom_clock(sc, 0); } return (edata); } static void ee16_eeprom_clock(struct ie_softc *sc, int state) { int ectrl; ectrl = inb(sc->port + IEE16_ECTRL); ectrl &= ~(IEE16_RESET_ASIC | IEE16_ECTRL_EESK); if (state) { ectrl |= IEE16_ECTRL_EESK; } outb(sc->port + IEE16_ECTRL, ectrl); DELAY(9); /* EESK must be stable for 8.38 uSec */ } static __inline void ee16_interrupt_enable(struct ie_softc *sc) { DELAY(100); outb(sc->port + IEE16_IRQ, sc->irq_encoded | IEE16_IRQ_ENABLE); DELAY(100); } void sl_read_ether(struct ie_softc *sc, unsigned char *addr) { int i; for (i = 0; i < 6; i++) addr[i] = inb(PORT(sc) + i); } static void iereset(struct ie_softc *sc) { struct ifnet *ifp = sc->ifp; if_printf(ifp, "reset\n"); ie_stop(sc); /* * Stop i82586 dead in its tracks. */ if (command_and_wait(sc, IE_RU_ABORT | IE_CU_ABORT, 0, 0)) if_printf(ifp, "abort commands timed out\n"); if (command_and_wait(sc, IE_RU_DISABLE | IE_CU_STOP, 0, 0)) if_printf(ifp, "disable commands timed out\n"); #ifdef notdef if (!check_ie_present(sc)) panic("ie disappeared!"); #endif if (ifp->if_flags & IFF_UP) ieinit_locked(sc); return; } /* * Send a command to the controller and wait for it to either * complete or be accepted, depending on the command. If the * command pointer is null, then pretend that the command is * not an action command. If the command pointer is not null, * and the command is an action command, wait for * ((volatile struct ie_cmd_common *)pcmd)->ie_cmd_status & MASK * to become true. */ static int command_and_wait(struct ie_softc *sc, int cmd, volatile void *pcmd, int mask) { volatile struct ie_cmd_common *cc = pcmd; int i; sc->scb->ie_command = (u_short) cmd; if (IE_ACTION_COMMAND(cmd) && pcmd) { (*sc->ie_chan_attn) (sc); /* * Now spin-lock waiting for status. This is not a very * nice thing to do, but I haven't figured out how, or * indeed if, we can put the process waiting for action to * sleep. (We may be getting called through some other * timeout running in the kernel.) * * According to the packet driver, the minimum timeout * should be .369 seconds, which we round up to .37. */ for (i = 0; i < 370; i++) { if (cc->ie_cmd_status & mask) return (0); DELAY(1000); } return (1); } else { /* * Otherwise, just wait for the command to be accepted. */ (*sc->ie_chan_attn) (sc); while (sc->scb->ie_command); /* spin lock */ return (0); } } /* * Run the time-domain reflectometer... */ static void run_tdr(struct ie_softc *sc, volatile struct ie_tdr_cmd *cmd) { int result; cmd->com.ie_cmd_status = 0; cmd->com.ie_cmd_cmd = IE_CMD_TDR | IE_CMD_LAST; cmd->com.ie_cmd_link = 0xffff; cmd->ie_tdr_time = 0; sc->scb->ie_command_list = MK_16(MEM(sc), cmd); cmd->ie_tdr_time = 0; if (command_and_wait(sc, IE_CU_START, cmd, IE_STAT_COMPL)) result = 0x2000; else result = cmd->ie_tdr_time; ie_ack(sc, IE_ST_WHENCE); if (result & IE_TDR_SUCCESS) return; if (result & IE_TDR_XCVR) { if_printf(sc->ifp, "transceiver problem\n"); } else if (result & IE_TDR_OPEN) { if_printf(sc->ifp, "TDR detected an open %d clocks away\n", result & IE_TDR_TIME); } else if (result & IE_TDR_SHORT) { if_printf(sc->ifp, "TDR detected a short %d clocks away\n", result & IE_TDR_TIME); } else { if_printf(sc->ifp, "TDR returned unknown status %x\n", result); } } static void start_receiver(struct ie_softc *sc) { sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]); command_and_wait(sc, IE_RU_START, 0, 0); ie_ack(sc, IE_ST_WHENCE); } /* * Here is a helper routine for iernr() and ieinit(). This sets up * the RFA. */ static v_caddr_t setup_rfa(struct ie_softc *sc, v_caddr_t ptr) { volatile struct ie_recv_frame_desc *rfd = (volatile void *)ptr; volatile struct ie_recv_buf_desc *rbd; int i; /* First lay them out */ for (i = 0; i < sc->nframes; i++) { sc->rframes[i] = rfd; bzero((volatile char *) rfd, sizeof *rfd); /* ignore cast-qual */ rfd++; } ptr = Alignvol(rfd); /* ignore cast-qual */ /* Now link them together */ for (i = 0; i < sc->nframes; i++) { sc->rframes[i]->ie_fd_next = MK_16(MEM(sc), sc->rframes[(i + 1) % sc->nframes]); } /* Finally, set the EOL bit on the last one. */ sc->rframes[sc->nframes - 1]->ie_fd_last |= IE_FD_LAST; /* * Now lay out some buffers for the incoming frames. Note that we * set aside a bit of slop in each buffer, to make sure that we have * enough space to hold a single frame in every buffer. */ rbd = (volatile void *) ptr; for (i = 0; i < sc->nrxbufs; i++) { sc->rbuffs[i] = rbd; bzero((volatile char *)rbd, sizeof *rbd); ptr = Alignvol(ptr + sizeof *rbd); rbd->ie_rbd_length = IE_RBUF_SIZE; rbd->ie_rbd_buffer = MK_24(MEM(sc), ptr); sc->cbuffs[i] = (volatile void *) ptr; ptr += IE_RBUF_SIZE; rbd = (volatile void *) ptr; } /* Now link them together */ for (i = 0; i < sc->nrxbufs; i++) { sc->rbuffs[i]->ie_rbd_next = MK_16(MEM(sc), sc->rbuffs[(i + 1) % sc->nrxbufs]); } /* Tag EOF on the last one */ sc->rbuffs[sc->nrxbufs - 1]->ie_rbd_length |= IE_RBD_LAST; /* * We use the head and tail pointers on receive to keep track of the * order in which RFDs and RBDs are used. */ sc->rfhead = 0; sc->rftail = sc->nframes - 1; sc->rbhead = 0; sc->rbtail = sc->nrxbufs - 1; sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]); sc->rframes[0]->ie_fd_buf_desc = MK_16(MEM(sc), sc->rbuffs[0]); ptr = Alignvol(ptr); return (ptr); } /* * Run the multicast setup command. */ static int mc_setup(struct ie_softc *sc) { volatile struct ie_mcast_cmd *cmd = (volatile void *)sc->xmit_cbuffs[0]; cmd->com.ie_cmd_status = 0; cmd->com.ie_cmd_cmd = IE_CMD_MCAST | IE_CMD_LAST; cmd->com.ie_cmd_link = 0xffff; /* ignore cast-qual */ bcopy((v_caddr_t) sc->mcast_addrs, (v_caddr_t) cmd->ie_mcast_addrs, sc->mcast_count * sizeof *sc->mcast_addrs); cmd->ie_mcast_bytes = sc->mcast_count * 6; /* grrr... */ sc->scb->ie_command_list = MK_16(MEM(sc), cmd); if (command_and_wait(sc, IE_CU_START, cmd, IE_STAT_COMPL) || !(cmd->com.ie_cmd_status & IE_STAT_OK)) { if_printf(sc->ifp, "multicast address setup command failed\n"); return (0); } return (1); } /* * This routine takes the environment generated by check_ie_present() * and adds to it all the other structures we need to operate the adapter. * This includes executing the CONFIGURE, IA-SETUP, and MC-SETUP commands, * starting the receiver unit, and clearing interrupts. */ static void ieinit(xsc) void *xsc; { struct ie_softc *sc = xsc; IE_LOCK(sc); ieinit_locked(sc); IE_UNLOCK(sc); } static void ieinit_locked(struct ie_softc *sc) { struct ifnet *ifp = sc->ifp; volatile struct ie_sys_ctl_block *scb = sc->scb; caddr_t ptr; int i; ptr = Alignvol((volatile char *) scb + sizeof *scb); /* * Send the configure command first. */ { volatile struct ie_config_cmd *cmd = (volatile void *) ptr; ie_setup_config(cmd, sc->promisc, sc->hard_type == IE_STARLAN10); cmd->com.ie_cmd_status = 0; cmd->com.ie_cmd_cmd = IE_CMD_CONFIG | IE_CMD_LAST; cmd->com.ie_cmd_link = 0xffff; scb->ie_command_list = MK_16(MEM(sc), cmd); if (command_and_wait(sc, IE_CU_START, cmd, IE_STAT_COMPL) || !(cmd->com.ie_cmd_status & IE_STAT_OK)) { if_printf(ifp, "configure command failed\n"); return; } } /* * Now send the Individual Address Setup command. */ { volatile struct ie_iasetup_cmd *cmd = (volatile void *) ptr; cmd->com.ie_cmd_status = 0; cmd->com.ie_cmd_cmd = IE_CMD_IASETUP | IE_CMD_LAST; cmd->com.ie_cmd_link = 0xffff; bcopy((volatile char *)IF_LLADDR(ifp), (volatile char *)&cmd->ie_address, sizeof cmd->ie_address); scb->ie_command_list = MK_16(MEM(sc), cmd); if (command_and_wait(sc, IE_CU_START, cmd, IE_STAT_COMPL) || !(cmd->com.ie_cmd_status & IE_STAT_OK)) { if_printf(ifp, "individual address " "setup command failed\n"); return; } } /* * Now run the time-domain reflectometer. */ run_tdr(sc, (volatile void *) ptr); /* * Acknowledge any interrupts we have generated thus far. */ ie_ack(sc, IE_ST_WHENCE); /* * Set up the RFA. */ ptr = setup_rfa(sc, ptr); /* * Finally, the transmit command and buffer are the last little bit * of work. */ /* transmit command buffers */ for (i = 0; i < sc->ntxbufs; i++) { sc->xmit_cmds[i] = (volatile void *) ptr; ptr += sizeof *sc->xmit_cmds[i]; ptr = Alignvol(ptr); sc->xmit_buffs[i] = (volatile void *)ptr; ptr += sizeof *sc->xmit_buffs[i]; ptr = Alignvol(ptr); } /* transmit buffers */ for (i = 0; i < sc->ntxbufs - 1; i++) { sc->xmit_cbuffs[i] = (volatile void *)ptr; ptr += IE_BUF_LEN; ptr = Alignvol(ptr); } sc->xmit_cbuffs[sc->ntxbufs - 1] = (volatile void *) ptr; for (i = 1; i < sc->ntxbufs; i++) { bzero((v_caddr_t) sc->xmit_cmds[i], sizeof *sc->xmit_cmds[i]); bzero((v_caddr_t) sc->xmit_buffs[i], sizeof *sc->xmit_buffs[i]); } /* * This must be coordinated with iestart() and ietint(). */ sc->xmit_cmds[0]->ie_xmit_status = IE_STAT_COMPL; /* take the ee16 out of loopback */ if (sc->hard_type == IE_EE16) { u_int8_t bart_config; bart_config = inb(PORT(sc) + IEE16_CONFIG); bart_config &= ~IEE16_BART_LOOPBACK; /* inb doesn't get bit! */ bart_config |= IEE16_BART_MCS16_TEST; outb(PORT(sc) + IEE16_CONFIG, bart_config); ee16_interrupt_enable(sc); ee16_chan_attn(sc); } ifp->if_drv_flags |= IFF_DRV_RUNNING; /* tell higher levels * we're here */ ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; start_receiver(sc); return; } static void ie_stop(struct ie_softc *sc) { struct ifnet *ifp = sc->ifp; ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); command_and_wait(sc, IE_RU_DISABLE, 0, 0); } static int ieioctl(struct ifnet *ifp, u_long command, caddr_t data) { int error = 0; struct ie_softc *sc = ifp->if_softc; switch (command) { case SIOCSIFFLAGS: /* * Note that this device doesn't have an "all multicast" * mode, so we must turn on promiscuous mode and do the * filtering manually. */ IE_LOCK(sc); if ((ifp->if_flags & IFF_UP) == 0 && (ifp->if_drv_flags & IFF_DRV_RUNNING)) { ie_stop(sc); } else if ((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { sc->promisc = ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI); ieinit_locked(sc); } else if (sc->promisc ^ (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI))) { sc->promisc = ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI); ieinit_locked(sc); } IE_UNLOCK(sc); break; case SIOCADDMULTI: case SIOCDELMULTI: /* * Update multicast listeners */ /* reset multicast filtering */ IE_LOCK(sc); ie_mc_reset(sc); IE_UNLOCK(sc); error = 0; break; default: error = ether_ioctl(ifp, command, data); break; } return (error); } static void ie_mc_reset(struct ie_softc *sc) { struct ifmultiaddr *ifma; /* * Step through the list of addresses. */ sc->mcast_count = 0; if_maddr_rlock(sc->ifp); TAILQ_FOREACH(ifma, &sc->ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; /* XXX - this is broken... */ if (sc->mcast_count >= MAXMCAST) { sc->ifp->if_flags |= IFF_ALLMULTI; if (sc->ifp->if_flags & IFF_UP) ieinit_locked(sc); goto setflag; } bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr), &(sc->mcast_addrs[sc->mcast_count]), 6); sc->mcast_count++; } if_maddr_runlock(sc->ifp); setflag: sc->want_mcsetup = 1; } #ifdef DEBUG static void print_rbd(volatile struct ie_recv_buf_desc * rbd) { printf("RBD at %p:\n" "actual %04x, next %04x, buffer %p\n" "length %04x, mbz %04x\n", (volatile void *) rbd, rbd->ie_rbd_actual, rbd->ie_rbd_next, (void *) rbd->ie_rbd_buffer, rbd->ie_rbd_length, rbd->mbz); } #endif /* DEBUG */ int ie_alloc_resources (device_t dev) { struct ie_softc * sc; int error; error = 0; sc = device_get_softc(dev); sc->io_res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &sc->io_rid, RF_ACTIVE); if (!sc->io_res) { device_printf(dev, "No I/O space?!\n"); error = ENOMEM; goto bad; } sc->io_bt = rman_get_bustag(sc->io_res); sc->io_bh = rman_get_bushandle(sc->io_res); sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->mem_rid, RF_ACTIVE); if (!sc->mem_res) { device_printf(dev, "No Memory!\n"); error = ENOMEM; goto bad; } sc->mem_bt = rman_get_bustag(sc->mem_res); sc->mem_bh = rman_get_bushandle(sc->mem_res); sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irq_rid, RF_ACTIVE); if (!sc->irq_res) { device_printf(dev, "No IRQ!\n"); error = ENOMEM; goto bad; } sc->port = rman_get_start(sc->io_res); /* XXX hack */ sc->iomembot = rman_get_virtual(sc->mem_res); sc->iosize = rman_get_size(sc->mem_res); return (0); bad: return (error); } void ie_release_resources (device_t dev) { struct ie_softc * sc; sc = device_get_softc(dev); if (sc->irq_ih) bus_teardown_intr(dev, sc->irq_res, sc->irq_ih); if (sc->rframes) free(sc->rframes, M_DEVBUF); if (sc->io_res) bus_release_resource(dev, SYS_RES_IOPORT, sc->io_rid, sc->io_res); if (sc->irq_res) bus_release_resource(dev, SYS_RES_IRQ, sc->irq_rid, sc->irq_res); if (sc->mem_res) bus_release_resource(dev, SYS_RES_MEMORY, sc->mem_rid, sc->mem_res); if (sc->ifp) if_free(sc->ifp); return; } int ie_detach (device_t dev) { struct ie_softc * sc; struct ifnet * ifp; sc = device_get_softc(dev); ifp = sc->ifp; IE_LOCK(sc); if (sc->hard_type == IE_EE16) ee16_shutdown(sc); ie_stop(sc); IE_UNLOCK(sc); ether_ifdetach(ifp); ie_release_resources(dev); mtx_destroy(&sc->lock); return (0); }