| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/send/@/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/send/@/dev/isci/scil/sati_read.c |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/sati_read.c 231689 2012-02-14 15:58:49Z jimharris $");
/**
* @file
* @brief This file contains the method implementations required to
* translate the SCSI read (6, 10, 12, or 16-byte) commands.
*/
#include <dev/isci/scil/sati_move.h>
#include <dev/isci/scil/sati_read.h>
#include <dev/isci/scil/sati_callbacks.h>
#include <dev/isci/scil/sati_util.h>
#include <dev/isci/scil/intel_ata.h>
#include <dev/isci/scil/intel_scsi.h>
//******************************************************************************
//* P R I V A T E M E T H O D S
//******************************************************************************
/**
* @brief This method performs the common translation functionality for
* all SCSI read operations that are 10 bytes in size or larger.
* Translated/Written items include:
* - Force Unit Access (FUA)
* - Sector Count/Transfer Length
* - Command register
*
* @param[in] sector_count This parameter specifies the number of sectors
* to be transferred by this request.
* @param[in] device_head This parameter points to device head register
* that is to be written into the ATA task file (register FIS).
*
* @return Indicate if the command translation succeeded.
* @see sati_move_set_sector_count() for additional return values.
*/
static
SATI_STATUS sati_read_large_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 sector_count,
U8 * device_head
)
{
sequence->data_direction = SATI_DATA_DIRECTION_IN;
return sati_move_large_translate_command(
sequence,
scsi_io,
ata_io,
sector_count,
device_head
);
}
/**
* @brief This method performs the common translation functionality for
* all SCSI read operations containing a 32-bit logical block
* address.
* Translated/Written items include:
* - Logical Block Address (LBA)
* - Force Unit Access (FUA)
* - Sector Count/Transfer Length
* - Command register
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @param[in] sector_count This parameter specifies the number of sectors
* to be transferred by this request.
* @param[in] control_byte_offset This parameter specifies the byte offset
* into the command descriptor block at which the control byte
* is located.
*
* @return Indicate if the command translation succeeded.
* @see sati_move_32_bit_lba_translate_command(), sati_move_set_sector_count()
* for additional return values.
*/
static
SATI_STATUS sati_read_32_bit_lba_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 sector_count,
U8 control_byte_offset
)
{
U8 device_head = 0;
SATI_STATUS status;
status = sati_read_large_translate_command(
sequence, scsi_io, ata_io, sector_count, &device_head
);
if (status == SATI_SUCCESS)
{
status = sati_move_32_bit_lba_translate_command(
sequence, scsi_io, ata_io, device_head
);
}
return status;
}
//******************************************************************************
//* P U B L I C M E T H O D S
//******************************************************************************
/**
* @brief This method will translate the SCSI read command into a
* corresponding ATA read 6 command. Depending upon the capabilities
* supported by the target different ATA commands can be selected.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if
* sense data has been created as a result of something specified
* in the CDB.
*/
SATI_STATUS sati_read_6_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
if(sati_device_state_stopped(sequence, scsi_io))
{
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
sequence->data_direction = SATI_DATA_DIRECTION_IN;
sequence->type = SATI_SEQUENCE_READ_6;
return sati_move_small_translate_command(sequence, scsi_io, ata_io);
}
}
/**
* @brief This method will translate the SCSI read 10 command into a
* corresponding ATA read command. Depending upon the capabilities
* supported by the target different ATA commands can be selected.
* It ensures that all translation required for this command is
* performed successfully.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @see sati_read_32_bit_lba_translate_command() for return values.
*/
SATI_STATUS sati_read_10_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
U32 sector_count = (sati_get_cdb_byte(cdb, 7) << 8) |
(sati_get_cdb_byte(cdb, 8));
if(sati_device_state_stopped(sequence, scsi_io))
{
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
sequence->type = SATI_SEQUENCE_READ_10;
return sati_read_32_bit_lba_translate_command(
sequence, scsi_io, ata_io, sector_count, 9
);
}
}
/**
* @brief This method will translate the SCSI read 12 command into a
* corresponding ATA read command. Depending upon the capabilities
* supported by the target different ATA commands can be selected.
* It ensures that all translation required for this command is
* performed successfully.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @see sati_read_32_bit_lba_translate_command() for return values.
*/
SATI_STATUS sati_read_12_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
U32 sector_count = (sati_get_cdb_byte(cdb, 6) << 24) |
(sati_get_cdb_byte(cdb, 7) << 16) |
(sati_get_cdb_byte(cdb, 8) << 8) |
(sati_get_cdb_byte(cdb, 9));
if(sati_device_state_stopped(sequence, scsi_io))
{
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
sequence->type = SATI_SEQUENCE_READ_12;
return sati_read_32_bit_lba_translate_command(
sequence, scsi_io, ata_io, sector_count, 11
);
}
}
/**
* @brief This method will translate the SCSI read 16 command into a
* corresponding ATA read command. Depending upon the capabilities
* supported by the target different ATA commands can be selected.
* It ensures that all translation required for this command is
* performed successfully.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @see sati_read_large_translate_command(), sati_move_translate_64_bit_lba()
* for additional return values.
*/
SATI_STATUS sati_read_16_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
SATI_STATUS status;
U8 device_head = 0;
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
U32 sector_count = (sati_get_cdb_byte(cdb, 10) << 24) |
(sati_get_cdb_byte(cdb, 11) << 16) |
(sati_get_cdb_byte(cdb, 12) << 8) |
(sati_get_cdb_byte(cdb, 13));
if(sati_device_state_stopped(sequence, scsi_io))
{
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
sequence->type = SATI_SEQUENCE_READ_16;
// Translate the sector count, write command register, and check various
// other parts of the CDB.
status = sati_read_large_translate_command(
sequence, scsi_io, ata_io, sector_count, &device_head
);
// Attempt to translate the 64-bit LBA field from the SCSI request
// into the 48-bits of LBA in the ATA register FIS.
if (status == SATI_SUCCESS)
{
sati_move_translate_command(sequence, scsi_io, ata_io, device_head);
status = sati_move_translate_64_bit_lba(sequence, scsi_io, ata_io);
}
return status;
}
}