| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/sound/driver/driver/@/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/sound/driver/driver/@/dev/isci/scil/scif_sas_remote_device_starting_substate_handlers.c |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/scif_sas_remote_device_starting_substate_handlers.c 231689 2012-02-14 15:58:49Z jimharris $");
/**
* @file
*
* @brief This file contains all of the method implementations pertaining
* to the framework remote device STARTING sub-state handler methods.
* The STARTING sub-state machine is responsible for ensuring that
* all initialization and configuration for a particular remote
* device is complete before transitioning to the READY state
* (i.e. before allowing normal host IO).
*/
#include <dev/isci/scil/scic_remote_device.h>
#include <dev/isci/scil/scif_sas_logger.h>
#include <dev/isci/scil/scif_sas_remote_device.h>
#include <dev/isci/scil/scif_sas_domain.h>
#include <dev/isci/scil/scif_sas_task_request.h>
//******************************************************************************
//* G E N E R A L S T O P H A N D L E R S
//******************************************************************************
/**
* @brief This method provides startig sub-state specific handling for
* when the remote device is requested to stop. This will occur
* when there is a link failure during the starting operation.
*
* @param[in] remote_device This parameter specifies the remote device
* object for which the failure condition occurred.
*
* @return This method returns an indication as to whether the failure
* operation completed successfully.
*/
static
SCI_STATUS
scif_sas_remote_device_starting_state_general_stop_handler(
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T *)
remote_device;
SCIF_LOG_INFO((
sci_base_object_get_logger(fw_device),
SCIF_LOG_OBJECT_REMOTE_DEVICE,
"RemoteDevice:0x%x starting device requested to stop\n",
fw_device
));
fw_device->domain->device_start_in_progress_count--;
sci_base_state_machine_change_state(
&fw_device->parent.state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING
);
return SCI_SUCCESS;
}
//******************************************************************************
//* A W A I T C O M P L E T E H A N D L E R S
//******************************************************************************
/**
* @brief This method provides AWAIT START COMPLETE sub-state specific
* handling for when the remote device undergoes a failure
* condition.
*
* @param[in] remote_device This parameter specifies the remote device
* object for which the failure condition occurred.
*
* @return This method returns an indication as to whether the failure
* operation completed successfully.
*/
static
SCI_STATUS scif_sas_remote_device_starting_await_complete_fail_handler(
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T *)
remote_device;
SCIF_LOG_WARNING((
sci_base_object_get_logger(fw_device),
SCIF_LOG_OBJECT_REMOTE_DEVICE,
"RemoteDevice:0x%x starting device failed, start complete not received\n",
fw_device
));
sci_base_state_machine_change_state(
&fw_device->parent.state_machine, SCI_BASE_REMOTE_DEVICE_STATE_FAILED
);
return SCI_SUCCESS;
}
/**
* @brief This method provides AWAIT COMPLETE state specific handling for
* when the core remote device object issues a device not ready
* notification. In the AWAIT COMPLETE state we do not inform
* the framework user of the state change of the device, since the
* user is unaware of the remote device start process.
*
* @param[in] remote_device This parameter specifies the remote device
* object for which the notification occurred.
*
* @return none.
*/
static
void scif_sas_remote_device_starting_await_complete_not_ready_handler(
SCIF_SAS_REMOTE_DEVICE_T * fw_device,
U32 reason_code
)
{
}
/**
* @brief This method provides AWAIT START COMPLETE sub-state specific
* handling for when the core provides a start complete notification
* for the remote device. If the start completion status indicates
* a successful start, then the device is transitioned into the
* READY state. All other status cause a transition to the
* FAILED state and a scif_cb_controller_error() notification
* message to the framework user.
*
* @param[in] fw_device This parameter specifies the remote device
* object for which the notification has occurred.
*
* @return none.
*/
static
void scif_sas_remote_device_starting_await_complete_start_complete_handler(
SCIF_SAS_REMOTE_DEVICE_T * fw_device,
SCI_STATUS completion_status
)
{
if (completion_status == SCI_SUCCESS)
{
/** @todo need to add support for resetting the device first. This can
wait until 1.3. */
/** @todo Update to comprehend situations (i.e. SATA) where config is
needed. */
sci_base_state_machine_change_state(
&fw_device->starting_substate_machine,
SCIF_SAS_REMOTE_DEVICE_STARTING_SUBSTATE_AWAIT_READY
);
}
else
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(fw_device),
SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_REMOTE_DEVICE_CONFIG,
"Device:0x%x Status:0x%x failed to start core device\n",
fw_device
));
sci_base_state_machine_change_state(
&fw_device->parent.state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_FAILED
);
// Something is seriously wrong. Starting the core remote device
// shouldn't fail in anyway in this state.
scif_cb_controller_error(fw_device->domain->controller,
SCI_CONTROLLER_REMOTE_DEVICE_ERROR);
}
}
//******************************************************************************
//* C O M P L E T E H A N D L E R S
//******************************************************************************
/**
* @brief This method provides STARTING AWAIT READY sub-state specific
* handling for when the core provides a device ready notification
* for the remote device. This essentially, causes a transition
* of the framework remote device into the READY state.
*
* @param[in] fw_device This parameter specifies the remote device
* object for which the notification has occurred.
*
* @return none.
*/
static
void scif_sas_remote_device_starting_await_ready_ready_handler(
SCIF_SAS_REMOTE_DEVICE_T * fw_device
)
{
#if !defined(DISABLE_WIDE_PORTED_TARGETS)
if (fw_device->destination_state ==
SCIF_SAS_REMOTE_DEVICE_DESTINATION_STATE_UPDATING_PORT_WIDTH)
{
{
sci_base_state_machine_change_state(
&fw_device->parent.state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_UPDATING_PORT_WIDTH
);
}
}
else
#endif
{
sci_base_state_machine_change_state(
&fw_device->parent.state_machine, SCI_BASE_REMOTE_DEVICE_STATE_READY
);
}
#if !defined(DISABLE_WIDE_PORTED_TARGETS)
scif_sas_domain_remote_device_start_complete(fw_device->domain,fw_device);
#endif
}
SCIF_SAS_REMOTE_DEVICE_STATE_HANDLER_T
scif_sas_remote_device_starting_substate_handler_table[] =
{
// SCIF_SAS_REMOTE_DEVICE_STARTING_SUBSTATE_AWAIT_COMPLETE
{
{
scif_sas_remote_device_default_start_handler,
scif_sas_remote_device_starting_state_general_stop_handler,
scif_sas_remote_device_starting_await_complete_fail_handler,
scif_sas_remote_device_default_destruct_handler,
scif_sas_remote_device_default_reset_handler,
scif_sas_remote_device_default_reset_complete_handler,
scif_sas_remote_device_default_start_io_handler,
scif_sas_remote_device_default_complete_io_handler,
scif_sas_remote_device_default_continue_io_handler,
scif_sas_remote_device_default_start_task_handler,
scif_sas_remote_device_default_complete_task_handler
},
scif_sas_remote_device_starting_await_complete_start_complete_handler,
scif_sas_remote_device_default_stop_complete_handler,
scif_sas_remote_device_default_ready_handler,
scif_sas_remote_device_starting_await_complete_not_ready_handler,
scif_sas_remote_device_default_start_io_handler,
scif_sas_remote_device_default_complete_high_priority_io_handler
},
// SCIF_SAS_REMOTE_DEVICE_STARTING_SUBSTATE_AWAIT_READY
{
{
scif_sas_remote_device_default_start_handler,
scif_sas_remote_device_starting_state_general_stop_handler,
scif_sas_remote_device_starting_await_complete_fail_handler,
scif_sas_remote_device_default_destruct_handler,
scif_sas_remote_device_default_reset_handler,
scif_sas_remote_device_default_reset_complete_handler,
scif_sas_remote_device_default_start_io_handler,
scif_sas_remote_device_default_complete_io_handler,
scif_sas_remote_device_default_continue_io_handler,
scif_sas_remote_device_default_start_task_handler,
scif_sas_remote_device_default_complete_task_handler
},
scif_sas_remote_device_default_start_complete_handler,
scif_sas_remote_device_default_stop_complete_handler,
scif_sas_remote_device_starting_await_ready_ready_handler,
scif_sas_remote_device_default_not_ready_handler,
scif_sas_remote_device_default_start_io_handler,
scif_sas_remote_device_default_complete_high_priority_io_handler
}
};