Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/ste/@/dev/mps/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/ste/@/dev/mps/mps_ioctl.h |
/*- * Copyright (c) 2008 Yahoo!, Inc. * All rights reserved. * Written by: John Baldwin <jhb@FreeBSD.org> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * LSI MPT-Fusion Host Adapter FreeBSD userland interface * * $FreeBSD: release/9.1.0/sys/dev/mps/mps_ioctl.h 237876 2012-07-01 05:22:45Z ken $ */ /*- * Copyright (c) 2011, 2012 LSI Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * LSI MPT-Fusion Host Adapter FreeBSD * * $FreeBSD: release/9.1.0/sys/dev/mps/mps_ioctl.h 237876 2012-07-01 05:22:45Z ken $ */ #ifndef _MPS_IOCTL_H_ #define _MPS_IOCTL_H_ #include <dev/mps/mpi/mpi2_type.h> #include <dev/mps/mpi/mpi2.h> #include <dev/mps/mpi/mpi2_cnfg.h> #include <dev/mps/mpi/mpi2_sas.h> /* * For the read header requests, the header should include the page * type or extended page type, page number, and page version. The * buffer and length are unused. The completed header is returned in * the 'header' member. * * For the read page and write page requests, 'buf' should point to a * buffer of 'len' bytes which holds the entire page (including the * header). * * All requests specify the page address in 'page_address'. */ struct mps_cfg_page_req { MPI2_CONFIG_PAGE_HEADER header; uint32_t page_address; void *buf; int len; uint16_t ioc_status; }; struct mps_ext_cfg_page_req { MPI2_CONFIG_EXTENDED_PAGE_HEADER header; uint32_t page_address; void *buf; int len; uint16_t ioc_status; }; struct mps_raid_action { uint8_t action; uint8_t volume_bus; uint8_t volume_id; uint8_t phys_disk_num; uint32_t action_data_word; void *buf; int len; uint32_t volume_status; uint32_t action_data[4]; uint16_t action_status; uint16_t ioc_status; uint8_t write; }; struct mps_usr_command { void *req; uint32_t req_len; void *rpl; uint32_t rpl_len; void *buf; int len; uint32_t flags; }; typedef struct mps_pci_bits { union { struct { uint32_t DeviceNumber :5; uint32_t FunctionNumber :3; uint32_t BusNumber :24; } bits; uint32_t AsDWORD; } u; uint32_t PciSegmentId; } mps_pci_bits_t; /* * The following is the MPSIOCTL_GET_ADAPTER_DATA data structure. This data * structure is setup so that we hopefully are properly aligned for both * 32-bit and 64-bit mode applications. * * Adapter Type - Value = 4 = SCSI Protocol through SAS-2 adapter * * MPI Port Number - The PCI Function number for this device * * PCI Device HW Id - The PCI device number for this device * */ #define MPSIOCTL_ADAPTER_TYPE_SAS2 4 #define MPSIOCTL_ADAPTER_TYPE_SAS2_SSS6200 5 typedef struct mps_adapter_data { uint32_t StructureLength; uint32_t AdapterType; uint32_t MpiPortNumber; uint32_t PCIDeviceHwId; uint32_t PCIDeviceHwRev; uint32_t SubSystemId; uint32_t SubsystemVendorId; uint32_t Reserved1; uint32_t MpiFirmwareVersion; uint32_t BiosVersion; uint8_t DriverVersion[32]; uint8_t Reserved2; uint8_t ScsiId; uint16_t Reserved3; mps_pci_bits_t PciInformation; } mps_adapter_data_t; typedef struct mps_update_flash { uint64_t PtrBuffer; uint32_t ImageChecksum; uint32_t ImageOffset; uint32_t ImageSize; uint32_t ImageType; } mps_update_flash_t; #define MPS_PASS_THRU_DIRECTION_NONE 0 #define MPS_PASS_THRU_DIRECTION_READ 1 #define MPS_PASS_THRU_DIRECTION_WRITE 2 #define MPS_PASS_THRU_DIRECTION_BOTH 3 typedef struct mps_pass_thru { uint64_t PtrRequest; uint64_t PtrReply; uint64_t PtrData; uint32_t RequestSize; uint32_t ReplySize; uint32_t DataSize; uint32_t DataDirection; uint64_t PtrDataOut; uint32_t DataOutSize; uint32_t Timeout; } mps_pass_thru_t; /* * Event queue defines */ #define MPS_EVENT_QUEUE_SIZE (50) /* Max Events stored in driver */ #define MPS_MAX_EVENT_DATA_LENGTH (48) /* Size of each event in Dwords */ typedef struct mps_event_query { uint16_t Entries; uint16_t Reserved; uint32_t Types[4]; } mps_event_query_t; typedef struct mps_event_enable { uint32_t Types[4]; } mps_event_enable_t; /* * Event record entry for ioctl. */ typedef struct mps_event_entry { uint32_t Type; uint32_t Number; uint32_t Data[MPS_MAX_EVENT_DATA_LENGTH]; } mps_event_entry_t; typedef struct mps_event_report { uint32_t Size; uint64_t PtrEvents; } mps_event_report_t; typedef struct mps_pci_info { uint32_t BusNumber; uint8_t DeviceNumber; uint8_t FunctionNumber; uint16_t InterruptVector; uint8_t PciHeader[256]; } mps_pci_info_t; typedef struct mps_diag_action { uint32_t Action; uint32_t Length; uint64_t PtrDiagAction; uint32_t ReturnCode; } mps_diag_action_t; #define MPS_FW_DIAGNOSTIC_UID_NOT_FOUND (0xFF) #define MPS_FW_DIAG_NEW (0x806E6577) #define MPS_FW_DIAG_TYPE_REGISTER (0x00000001) #define MPS_FW_DIAG_TYPE_UNREGISTER (0x00000002) #define MPS_FW_DIAG_TYPE_QUERY (0x00000003) #define MPS_FW_DIAG_TYPE_READ_BUFFER (0x00000004) #define MPS_FW_DIAG_TYPE_RELEASE (0x00000005) #define MPS_FW_DIAG_INVALID_UID (0x00000000) #define MPS_DIAG_SUCCESS 0 #define MPS_DIAG_FAILURE 1 #define MPS_FW_DIAG_ERROR_SUCCESS (0x00000000) #define MPS_FW_DIAG_ERROR_FAILURE (0x00000001) #define MPS_FW_DIAG_ERROR_INVALID_PARAMETER (0x00000002) #define MPS_FW_DIAG_ERROR_POST_FAILED (0x00000010) #define MPS_FW_DIAG_ERROR_INVALID_UID (0x00000011) #define MPS_FW_DIAG_ERROR_RELEASE_FAILED (0x00000012) #define MPS_FW_DIAG_ERROR_NO_BUFFER (0x00000013) #define MPS_FW_DIAG_ERROR_ALREADY_RELEASED (0x00000014) typedef struct mps_fw_diag_register { uint8_t ExtendedType; uint8_t BufferType; uint16_t ApplicationFlags; uint32_t DiagnosticFlags; uint32_t ProductSpecific[23]; uint32_t RequestedBufferSize; uint32_t UniqueId; } mps_fw_diag_register_t; typedef struct mps_fw_diag_unregister { uint32_t UniqueId; } mps_fw_diag_unregister_t; #define MPS_FW_DIAG_FLAG_APP_OWNED (0x0001) #define MPS_FW_DIAG_FLAG_BUFFER_VALID (0x0002) #define MPS_FW_DIAG_FLAG_FW_BUFFER_ACCESS (0x0004) typedef struct mps_fw_diag_query { uint8_t ExtendedType; uint8_t BufferType; uint16_t ApplicationFlags; uint32_t DiagnosticFlags; uint32_t ProductSpecific[23]; uint32_t TotalBufferSize; uint32_t DriverAddedBufferSize; uint32_t UniqueId; } mps_fw_diag_query_t; typedef struct mps_fw_diag_release { uint32_t UniqueId; } mps_fw_diag_release_t; #define MPS_FW_DIAG_FLAG_REREGISTER (0x0001) #define MPS_FW_DIAG_FLAG_FORCE_RELEASE (0x0002) typedef struct mps_diag_read_buffer { uint8_t Status; uint8_t Reserved; uint16_t Flags; uint32_t StartingOffset; uint32_t BytesToRead; uint32_t UniqueId; uint64_t PtrDataBuffer; } mps_diag_read_buffer_t; /* * Register Access */ #define REG_IO_READ 1 #define REG_IO_WRITE 2 #define REG_MEM_READ 3 #define REG_MEM_WRITE 4 typedef struct mps_reg_access { uint32_t Command; uint32_t RegOffset; uint32_t RegData; } mps_reg_access_t; typedef struct mps_btdh_mapping { uint16_t TargetID; uint16_t Bus; uint16_t DevHandle; uint16_t Reserved; } mps_btdh_mapping_t; #define MPSIO_MPS_COMMAND_FLAG_VERBOSE 0x01 #define MPSIO_MPS_COMMAND_FLAG_DEBUG 0x02 #define MPSIO_READ_CFG_HEADER _IOWR('M', 200, struct mps_cfg_page_req) #define MPSIO_READ_CFG_PAGE _IOWR('M', 201, struct mps_cfg_page_req) #define MPSIO_READ_EXT_CFG_HEADER _IOWR('M', 202, struct mps_ext_cfg_page_req) #define MPSIO_READ_EXT_CFG_PAGE _IOWR('M', 203, struct mps_ext_cfg_page_req) #define MPSIO_WRITE_CFG_PAGE _IOWR('M', 204, struct mps_cfg_page_req) #define MPSIO_RAID_ACTION _IOWR('M', 205, struct mps_raid_action) #define MPSIO_MPS_COMMAND _IOWR('M', 210, struct mps_usr_command) #define MPTIOCTL ('I') #define MPTIOCTL_GET_ADAPTER_DATA _IOWR(MPTIOCTL, 1,\ struct mps_adapter_data) #define MPTIOCTL_UPDATE_FLASH _IOWR(MPTIOCTL, 2,\ struct mps_update_flash) #define MPTIOCTL_RESET_ADAPTER _IO(MPTIOCTL, 3) #define MPTIOCTL_PASS_THRU _IOWR(MPTIOCTL, 4,\ struct mps_pass_thru) #define MPTIOCTL_EVENT_QUERY _IOWR(MPTIOCTL, 5,\ struct mps_event_query) #define MPTIOCTL_EVENT_ENABLE _IOWR(MPTIOCTL, 6,\ struct mps_event_enable) #define MPTIOCTL_EVENT_REPORT _IOWR(MPTIOCTL, 7,\ struct mps_event_report) #define MPTIOCTL_GET_PCI_INFO _IOWR(MPTIOCTL, 8,\ struct mps_pci_info) #define MPTIOCTL_DIAG_ACTION _IOWR(MPTIOCTL, 9,\ struct mps_diag_action) #define MPTIOCTL_REG_ACCESS _IOWR(MPTIOCTL, 10,\ struct mps_reg_access) #define MPTIOCTL_BTDH_MAPPING _IOWR(MPTIOCTL, 11,\ struct mps_btdh_mapping) #endif /* !_MPS_IOCTL_H_ */