| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/stge/@/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/stge/@/dev/isci/scil/sati_reassign_blocks.c |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/sati_reassign_blocks.c 231689 2012-02-14 15:58:49Z jimharris $");
/**
* @file
* @brief This file contains the method implementations required to
* translate the SCSI reassign blocks command.
*/
#if !defined(DISABLE_SATI_REASSIGN_BLOCKS)
#include <dev/isci/scil/sati_reassign_blocks.h>
#include <dev/isci/scil/sati_callbacks.h>
#include <dev/isci/scil/sati_move.h>
#include <dev/isci/scil/sati_write.h>
#include <dev/isci/scil/sati_translator_sequence.h>
#include <dev/isci/scil/sati_util.h>
#include <dev/isci/scil/intel_scsi.h>
//******************************************************************************
//* P R I V A T E M E T H O D S
//******************************************************************************
// static SATI_REASSIGN_BLOCKS_PROCESSING_STATE_T reassign_blocks_processing_state;
/**
* @brief This method copies short 24bits LBA bytes to the command register
* @return Indicate if the method was successfully completed.
* @retval SATI_SUCCESS This is returned in all other cases.
*/
static
void set_current_lba(U8 * lba, void * ata_io)
{
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_set_ata_lba_low(register_fis, lba[0]);
sati_set_ata_lba_mid(register_fis, lba[1]);
sati_set_ata_lba_high(register_fis, lba[2]);
sati_set_ata_device_head(register_fis, ATA_DEV_HEAD_REG_LBA_MODE_ENABLE | (lba[3] & 0x0F));
}
/**
* @brief This method copies short 48bits LBA bytes to the command register
* @return Indicate if the method was successfully completed.
* @retval SATI_SUCCESS This is returned in all other cases.
*/
static
void set_current_long_lba(U8 * lba, void * ata_io)
{
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_set_ata_lba_low(register_fis, lba[0]);
sati_set_ata_lba_mid(register_fis, lba[1]);
sati_set_ata_lba_high(register_fis, lba[2]);
sati_set_ata_lba_low_exp(register_fis, lba[3]);
sati_set_ata_lba_mid_exp(register_fis, lba[4]);
sati_set_ata_lba_high_exp(register_fis, lba[5]);
}
/**
* @brief This method performs the SCSI VERIFY command translation
* functionality.
* This includes:
* - setting the command register
* - setting the device head register
* - filling in fields in the SATI_TRANSLATOR_SEQUENCE object.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the method was successfully completed.
* @retval SATI_SUCCESS This is returned in all other cases.
*/
static
SATI_STATUS sati_reassign_blocks_verify_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_ata_non_data_command(ata_io, sequence);
// Ensure the device supports the 48 bit feature set.
if (sequence->device->capabilities & SATI_DEVICE_CAP_48BIT_ENABLE)
sati_set_ata_command(register_fis, ATA_READ_VERIFY_SECTORS_EXT);
else
sati_set_ata_command(register_fis, ATA_READ_VERIFY_SECTORS);
return SATI_SUCCESS;
}
/**
* @brief This method performs the SCSI Write sector command translation
* functionality.
* This includes:
* - setting the command register
* - setting the device head register
* - filling in fields in the SATI_TRANSLATOR_SEQUENCE object.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the method was successfully completed.
* @retval SATI_SUCCESS This is returned in all other cases.
*/
static
SATI_STATUS sati_reassign_blocks_write_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io);
sati_ata_non_data_command(ata_io, sequence);
sequence->data_direction = SATI_DATA_DIRECTION_OUT;
// sati_set_ata_sector_count(register_fis, 1);
// status=sati_move_set_sector_count(sequence,scsi_io,ata_io,1,0);
// Ensure the device supports the 48 bit feature set.
if (sequence->device->capabilities & SATI_DEVICE_CAP_48BIT_ENABLE)
sati_set_ata_command(register_fis, ATA_WRITE_DMA_EXT);
else
sati_set_ata_command(register_fis, ATA_WRITE_DMA);
return SATI_SUCCESS; //sati_move_set_sector_count(sequence,scsi_io,ata_io,1,0);
}
/**
* @brief This method performs the retrieving of parameter LBA praparation and setting
* processing flags before/after calling SCSI Verify sector command.
* @return Indicate if the method was successfully completed.
* @retval SATI_SUCCESS This is returned in all other cases.
*/
static
SATI_STATUS sati_reassign_blocks_verify_condition(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 current_lba_bytes[8] = {0,0,0,0,0,0,0,0};
U32 lba_offset;
U8 page_size;
U32 index;
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
lba_offset = sequence->command_specific_data.reassign_blocks_process_state.lba_offset;
page_size = sequence->command_specific_data.reassign_blocks_process_state.lba_size;
for(index = 0; index < page_size; index++)
{
sati_get_data_byte(sequence, scsi_io, lba_offset+index, ¤t_lba_bytes[index]);
}
if (page_size == 4)
set_current_lba(current_lba_bytes, ata_io);
else
set_current_long_lba(current_lba_bytes, ata_io);
status = sati_reassign_blocks_verify_command(sequence, scsi_io, ata_io);
sequence->command_specific_data.reassign_blocks_process_state.ata_command_sent_for_current_lba++;
sequence->command_specific_data.reassign_blocks_process_state.ata_command_status = SATI_REASSIGN_BLOCKS_READY_TO_SEND;
return status;
}
/**
* @brief This method performs the retrieving of parameter LBA praparation and setting
* processing flags before/after calling SCSI Write sector command.
* @return Indicate if the method was successfully completed.
* @retval SATI_SUCCESS This is returned in all other cases.
*/
static
SATI_STATUS sati_reassign_blocks_write_condition(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 current_lba_bytes[8] = {0,0,0,0,0,0,0,0};
U32 lba_offset;
U8 page_size;
U32 index;
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
lba_offset = sequence->command_specific_data.reassign_blocks_process_state.lba_offset;
page_size = sequence->command_specific_data.reassign_blocks_process_state.lba_size;
for(index = 0; index < page_size; index++)
{
sati_get_data_byte(sequence, scsi_io, lba_offset+index, ¤t_lba_bytes[index]);
}
if (page_size == 4)
set_current_lba(current_lba_bytes, ata_io);
else
set_current_long_lba(current_lba_bytes, ata_io);
status = sati_reassign_blocks_write_command(sequence, scsi_io, ata_io);
sequence->command_specific_data.reassign_blocks_process_state.ata_command_sent_for_current_lba++;
sequence->command_specific_data.reassign_blocks_process_state.ata_command_status = SATI_REASSIGN_BLOCKS_READY_TO_SEND;
return status ;
}
/**
* @brief This method will perform the pre-processing of Reassign Blocks command and parameter.
*/
static
void sati_reassign_blocks_initial_processing(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U32 index;
U8 long_lba_bit;
U8 long_list_bit;
U8 lba_offset;
U8 page_size;
U32 data_transfer_length;
U8 header_bytes[4]={0,0,0,0};
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
//A long LBA (LONGLBA) bit set to zero specifies that the REASSIGN BLOCKS defective LBA list contains four-byte LBAs.
//A LONGLBA bit set to one specifies that the REASSIGN BLOCKS defective LBA list contains eight-byte LBAs.
if ((sati_get_cdb_byte(cdb, 1) & SCSI_REASSIGN_BLOCKS_LONGLBA_BIT) == 0)
{
long_lba_bit=0;
page_size = 4; //beginning of lba list
}
else
{
long_lba_bit=1;
page_size = 8;
}
//The long list (LONGLIST) bit specifies which parameter list header
if ((sati_get_cdb_byte(cdb, 1) & SCSI_REASSIGN_BLOCKS_LONGLIST_BIT) == 0)
{
long_list_bit=0;
}
else
{
long_list_bit=1;
}
sequence->allocation_length = 4; //Pre-set allocation_length so that the header can be retrieved
//Get 4 bytes for headers (byte 2 & byte 3 for short header; long header all 4 bytes)
for(index = 0; index < 4; index++)
{
sati_get_data_byte(sequence, scsi_io, index, &header_bytes[index]);
}
lba_offset = 4; //beginning of lba list
if (long_list_bit==0)
{
//Header byte 2 and 3 is the parameter list length
data_transfer_length = (header_bytes[2]<<8) + header_bytes[3] + lba_offset;
}
else
{
//Header byte 0, 1, 2 and 3 contain the parameter list length
data_transfer_length = (header_bytes[0]<<24) + (header_bytes[1]<<16) +
(header_bytes[2]<<8) + header_bytes[3] + lba_offset;
}
sequence->allocation_length = data_transfer_length;
//Initialized the global processing state
sequence->command_specific_data.reassign_blocks_process_state.lba_size = page_size;
sequence->command_specific_data.reassign_blocks_process_state.lba_offset = lba_offset;
sequence->command_specific_data.reassign_blocks_process_state.ata_command_sent_for_current_lba = 0;
sequence->command_specific_data.reassign_blocks_process_state.block_lists_size = data_transfer_length - lba_offset;
sequence->command_specific_data.reassign_blocks_process_state.size_of_data_processed = 0;
sequence->command_specific_data.reassign_blocks_process_state.current_lba_processed = FALSE;
sequence->command_specific_data.reassign_blocks_process_state.ata_command_status = SATI_REASSIGN_BLOCKS_COMMAND_FAIL;
}
/**
* @brief This method will get the data size of not yet processed data.
*
* @param[in] lba_process_state This parameter points to the processing state fields
* of current block lba.
*
* @return This method returns the sizeof not yet processed data.
*/
static
U32 sati_reassign_blocks_unprocessed_data_size(
SATI_REASSIGN_BLOCKS_PROCESSING_STATE_T * lba_process_state
)
{
U32 unprocessed_data_size;
if(lba_process_state->block_lists_size >= lba_process_state->size_of_data_processed)
{
unprocessed_data_size = lba_process_state->block_lists_size -
lba_process_state->size_of_data_processed;
}
else
{
unprocessed_data_size = 0;
}
return unprocessed_data_size;
}
/**
* @brief This method will check verify the sector and issue multiple ATA set feature commands to complete the translation.
*
* @param[in] reassign_blocks_process_state This parameter points to the processing state fields
* of current lba block.
*
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_reassign_blocks_process_each_lba(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
SATI_REASSIGN_BLOCKS_PROCESSING_STATE_T * reassign_blocks_process_state;
reassign_blocks_process_state = &sequence->command_specific_data.reassign_blocks_process_state;
if((reassign_blocks_process_state->ata_command_sent_for_current_lba == 0)&&
(reassign_blocks_process_state->ata_command_status == SATI_REASSIGN_BLOCKS_COMMAND_FAIL))
{
reassign_blocks_process_state->size_of_data_processed += reassign_blocks_process_state->lba_size;
status = sati_reassign_blocks_verify_condition(sequence, scsi_io, ata_io);
}
else if((reassign_blocks_process_state->ata_command_sent_for_current_lba == 0)&&
(reassign_blocks_process_state->ata_command_status == SATI_REASSIGN_BLOCKS_COMMAND_SUCCESS))
{
// point to next lba
reassign_blocks_process_state->size_of_data_processed += reassign_blocks_process_state->lba_size;
reassign_blocks_process_state->lba_offset += reassign_blocks_process_state->lba_size;
status = sati_reassign_blocks_verify_condition(sequence, scsi_io, ata_io);
}
else if((reassign_blocks_process_state->ata_command_sent_for_current_lba == 1)&&
(reassign_blocks_process_state->ata_command_status == SATI_REASSIGN_BLOCKS_COMMAND_FAIL))
{
reassign_blocks_process_state->size_of_data_processed += reassign_blocks_process_state->lba_size;
status = sati_reassign_blocks_write_condition(sequence, scsi_io, ata_io);
}
else if((reassign_blocks_process_state->ata_command_sent_for_current_lba == 2) &&
(reassign_blocks_process_state->ata_command_status == SATI_REASSIGN_BLOCKS_COMMAND_SUCCESS))
{
reassign_blocks_process_state->size_of_data_processed += reassign_blocks_process_state->lba_size;
status = sati_reassign_blocks_verify_condition(sequence, scsi_io, ata_io);
}
else //commands sent is 2; SATI_REASSIGN_BLOCKS_COMMAND_FAIL
{
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
}
return status;
}
/**
* @brief This method will process the each lba.
*
* @param[in] reassign_blocks_process_state This parameter points to the processing state fields
* of current lba.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_reassign_blocks_process(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
U32 page_size = 0; // in bytes
U32 size_of_data_to_be_processed;
U32 lba_offset;
SATI_REASSIGN_BLOCKS_PROCESSING_STATE_T * reassign_blocks_process_state;
reassign_blocks_process_state = &sequence->command_specific_data.reassign_blocks_process_state;
lba_offset = reassign_blocks_process_state->lba_offset;
page_size = reassign_blocks_process_state->lba_size;
if(sati_reassign_blocks_unprocessed_data_size(reassign_blocks_process_state) < page_size)
{
return status;
}
// Any more lba blocks? If not, done.
if(reassign_blocks_process_state->block_lists_size ==
reassign_blocks_process_state->size_of_data_processed)
{
sequence->state = SATI_SEQUENCE_STATE_FINAL;
status = SATI_COMPLETE;
}
//start processing next lba
else
{
size_of_data_to_be_processed = reassign_blocks_process_state->block_lists_size
- reassign_blocks_process_state->size_of_data_processed;
status = sati_reassign_blocks_process_each_lba(sequence, scsi_io, ata_io);
}
return status;
}
//******************************************************************************
//* P U B L I C M E T H O D S
//******************************************************************************
/**
* @brief This method will translate the SCSI Reassign Blocks command
* into corresponding ATA commands. Depending upon the capabilities
* supported by the target different ATA commands can be selected.
* Additionally, in some cases more than a single ATA command may
* be required.
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
* @retval SCI_COMPLETE This is returned if the command translation was
* successful and no ATA commands need to be set.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if
* sense data has been created as a result of something specified
* in the parameter data fields.
*/
SATI_STATUS sati_reassign_blocks_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
SATI_REASSIGN_BLOCKS_PROCESSING_STATE_T * reassign_blocks_process_state;
reassign_blocks_process_state = &sequence->command_specific_data.reassign_blocks_process_state;
sequence->type = SATI_SEQUENCE_REASSIGN_BLOCKS;
//Initial processing if
if ( sequence->state != SATI_SEQUENCE_STATE_INCOMPLETE )
{
sati_reassign_blocks_initial_processing(
sequence,
scsi_io,
ata_io
);
}
// start processing current lba
if(reassign_blocks_process_state->current_lba_processed)
{
reassign_blocks_process_state->ata_command_sent_for_current_lba = 0;
reassign_blocks_process_state->current_lba_processed = FALSE;
}
status = sati_reassign_blocks_process(sequence, scsi_io, ata_io);
if(reassign_blocks_process_state->block_lists_size ==
reassign_blocks_process_state->size_of_data_processed)
{
// Done this lba
sequence->state = SATI_SEQUENCE_STATE_FINAL;
}
else
{
sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE;
}
if(status == SATI_FAILURE_CHECK_RESPONSE_DATA)
{
sequence->state = SATI_SEQUENCE_STATE_FINAL;
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_MEDIUM_ERROR,
SCSI_ASC_UNRECOVERED_READ_ERROR,
SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL
);
}
return status;
}
/**
* @brief This method will translate the ATA command register FIS
* response into an appropriate SCSI response for Reassign Blocks
* For more information on the parameters passed to this method,
* please reference sati_translate_response().
*
* @return Indicate if the response translation succeeded.
* @retval SCI_SUCCESS This is returned if the data translation was
* successful.
*/
SATI_STATUS sati_reassign_blocks_translate_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * register_fis = sati_cb_get_d2h_register_fis_address(ata_io);
SATI_REASSIGN_BLOCKS_PROCESSING_STATE_T * reassign_blocks_process_state;
reassign_blocks_process_state = &sequence->command_specific_data.reassign_blocks_process_state;
if (sati_get_ata_status(register_fis) & ATA_STATUS_REG_ERROR_BIT)
{
reassign_blocks_process_state->ata_command_status = SATI_REASSIGN_BLOCKS_COMMAND_FAIL;
//Checking for the number of ATA commands attempted on current LBA, stop
//the seaquence after 2 commands have returned errors.
if(reassign_blocks_process_state->ata_command_sent_for_current_lba < 2)
{
sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE;
reassign_blocks_process_state->size_of_data_processed -= reassign_blocks_process_state->lba_size;
return SATI_SEQUENCE_INCOMPLETE;
}
else
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_MEDIUM_ERROR,
SCSI_ASC_UNRECOVERED_READ_ERROR,
SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL
);
}
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
reassign_blocks_process_state->ata_command_status = SATI_REASSIGN_BLOCKS_COMMAND_SUCCESS;
if (reassign_blocks_process_state->ata_command_sent_for_current_lba != 2)
reassign_blocks_process_state->current_lba_processed = TRUE;
if (sequence->state == SATI_SEQUENCE_STATE_INCOMPLETE)
{
return SATI_SEQUENCE_INCOMPLETE;
}
}
return SATI_COMPLETE;
}
#endif // !defined(DISABLE_SATI_REASSIGN_BLOCKS)