| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/cdce/@/x86/acpica/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/cdce/@/x86/acpica/madt.c |
/*-
* Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/x86/acpica/madt.c 234147 2012-04-11 20:25:01Z jhb $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/smp.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <x86/apicreg.h>
#include <machine/intr_machdep.h>
#include <machine/apicvar.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/actables.h>
#include <dev/acpica/acpivar.h>
#include <dev/pci/pcivar.h>
/* These two arrays are indexed by APIC IDs. */
static struct {
void *io_apic;
UINT32 io_vector;
} *ioapics;
static struct lapic_info {
u_int la_enabled:1;
u_int la_acpi_id:8;
} lapics[MAX_APIC_ID + 1];
static int madt_found_sci_override;
static ACPI_TABLE_MADT *madt;
static vm_paddr_t madt_physaddr;
static vm_offset_t madt_length;
MALLOC_DEFINE(M_MADT, "madt_table", "ACPI MADT Table Items");
static enum intr_polarity interrupt_polarity(UINT16 IntiFlags, UINT8 Source);
static enum intr_trigger interrupt_trigger(UINT16 IntiFlags, UINT8 Source);
static int madt_find_cpu(u_int acpi_id, u_int *apic_id);
static int madt_find_interrupt(int intr, void **apic, u_int *pin);
static void madt_parse_apics(ACPI_SUBTABLE_HEADER *entry, void *arg);
static void madt_parse_interrupt_override(
ACPI_MADT_INTERRUPT_OVERRIDE *intr);
static void madt_parse_ints(ACPI_SUBTABLE_HEADER *entry,
void *arg __unused);
static void madt_parse_local_nmi(ACPI_MADT_LOCAL_APIC_NMI *nmi);
static void madt_parse_nmi(ACPI_MADT_NMI_SOURCE *nmi);
static int madt_probe(void);
static int madt_probe_cpus(void);
static void madt_probe_cpus_handler(ACPI_SUBTABLE_HEADER *entry,
void *arg __unused);
static void madt_register(void *dummy);
static int madt_setup_local(void);
static int madt_setup_io(void);
static void madt_walk_table(acpi_subtable_handler *handler, void *arg);
static struct apic_enumerator madt_enumerator = {
"MADT",
madt_probe,
madt_probe_cpus,
madt_setup_local,
madt_setup_io
};
/*
* Look for an ACPI Multiple APIC Description Table ("APIC")
*/
static int
madt_probe(void)
{
madt_physaddr = acpi_find_table(ACPI_SIG_MADT);
if (madt_physaddr == 0)
return (ENXIO);
return (0);
}
/*
* Run through the MP table enumerating CPUs.
*/
static int
madt_probe_cpus(void)
{
madt = acpi_map_table(madt_physaddr, ACPI_SIG_MADT);
madt_length = madt->Header.Length;
KASSERT(madt != NULL, ("Unable to re-map MADT"));
madt_walk_table(madt_probe_cpus_handler, NULL);
acpi_unmap_table(madt);
madt = NULL;
return (0);
}
/*
* Initialize the local APIC on the BSP.
*/
static int
madt_setup_local(void)
{
madt = pmap_mapbios(madt_physaddr, madt_length);
lapic_init(madt->Address);
printf("ACPI APIC Table: <%.*s %.*s>\n",
(int)sizeof(madt->Header.OemId), madt->Header.OemId,
(int)sizeof(madt->Header.OemTableId), madt->Header.OemTableId);
/*
* We ignore 64-bit local APIC override entries. Should we
* perhaps emit a warning here if we find one?
*/
return (0);
}
/*
* Enumerate I/O APICs and setup interrupt sources.
*/
static int
madt_setup_io(void)
{
void *ioapic;
u_int pin;
int i;
/* Try to initialize ACPI so that we can access the FADT. */
i = acpi_Startup();
if (ACPI_FAILURE(i)) {
printf("MADT: ACPI Startup failed with %s\n",
AcpiFormatException(i));
printf("Try disabling either ACPI or apic support.\n");
panic("Using MADT but ACPI doesn't work");
}
ioapics = malloc(sizeof(*ioapics) * (MAX_APIC_ID + 1), M_MADT,
M_WAITOK | M_ZERO);
/* First, we run through adding I/O APIC's. */
madt_walk_table(madt_parse_apics, NULL);
/* Second, we run through the table tweaking interrupt sources. */
madt_walk_table(madt_parse_ints, NULL);
/*
* If there was not an explicit override entry for the SCI,
* force it to use level trigger and active-low polarity.
*/
if (!madt_found_sci_override) {
if (madt_find_interrupt(AcpiGbl_FADT.SciInterrupt, &ioapic,
&pin) != 0)
printf("MADT: Could not find APIC for SCI IRQ %u\n",
AcpiGbl_FADT.SciInterrupt);
else {
printf(
"MADT: Forcing active-low polarity and level trigger for SCI\n");
ioapic_set_polarity(ioapic, pin, INTR_POLARITY_LOW);
ioapic_set_triggermode(ioapic, pin, INTR_TRIGGER_LEVEL);
}
}
/* Third, we register all the I/O APIC's. */
for (i = 0; i <= MAX_APIC_ID; i++)
if (ioapics[i].io_apic != NULL)
ioapic_register(ioapics[i].io_apic);
/* Finally, we throw the switch to enable the I/O APIC's. */
acpi_SetDefaultIntrModel(ACPI_INTR_APIC);
free(ioapics, M_MADT);
ioapics = NULL;
return (0);
}
static void
madt_register(void *dummy __unused)
{
apic_register_enumerator(&madt_enumerator);
}
SYSINIT(madt_register, SI_SUB_TUNABLES - 1, SI_ORDER_FIRST, madt_register, NULL);
/*
* Call the handler routine for each entry in the MADT table.
*/
static void
madt_walk_table(acpi_subtable_handler *handler, void *arg)
{
acpi_walk_subtables(madt + 1, (char *)madt + madt->Header.Length,
handler, arg);
}
static void
madt_probe_cpus_handler(ACPI_SUBTABLE_HEADER *entry, void *arg)
{
ACPI_MADT_LOCAL_APIC *proc;
struct lapic_info *la;
switch (entry->Type) {
case ACPI_MADT_TYPE_LOCAL_APIC:
/*
* The MADT does not include a BSP flag, so we have to
* let the MP code figure out which CPU is the BSP on
* its own.
*/
proc = (ACPI_MADT_LOCAL_APIC *)entry;
if (bootverbose)
printf("MADT: Found CPU APIC ID %u ACPI ID %u: %s\n",
proc->Id, proc->ProcessorId,
(proc->LapicFlags & ACPI_MADT_ENABLED) ?
"enabled" : "disabled");
if (!(proc->LapicFlags & ACPI_MADT_ENABLED))
break;
if (proc->Id > MAX_APIC_ID)
panic("%s: CPU ID %u too high", __func__, proc->Id);
la = &lapics[proc->Id];
KASSERT(la->la_enabled == 0,
("Duplicate local APIC ID %u", proc->Id));
la->la_enabled = 1;
la->la_acpi_id = proc->ProcessorId;
lapic_create(proc->Id, 0);
break;
}
}
/*
* Add an I/O APIC from an entry in the table.
*/
static void
madt_parse_apics(ACPI_SUBTABLE_HEADER *entry, void *arg __unused)
{
ACPI_MADT_IO_APIC *apic;
switch (entry->Type) {
case ACPI_MADT_TYPE_IO_APIC:
apic = (ACPI_MADT_IO_APIC *)entry;
if (bootverbose)
printf(
"MADT: Found IO APIC ID %u, Interrupt %u at %p\n",
apic->Id, apic->GlobalIrqBase,
(void *)(uintptr_t)apic->Address);
if (apic->Id > MAX_APIC_ID)
panic("%s: I/O APIC ID %u too high", __func__,
apic->Id);
if (ioapics[apic->Id].io_apic != NULL)
panic("%s: Double APIC ID %u", __func__, apic->Id);
if (apic->GlobalIrqBase >= FIRST_MSI_INT) {
printf("MADT: Ignoring bogus I/O APIC ID %u", apic->Id);
break;
}
ioapics[apic->Id].io_apic = ioapic_create(apic->Address,
apic->Id, apic->GlobalIrqBase);
ioapics[apic->Id].io_vector = apic->GlobalIrqBase;
break;
default:
break;
}
}
/*
* Determine properties of an interrupt source. Note that for ACPI these
* functions are only used for ISA interrupts, so we assume ISA bus values
* (Active Hi, Edge Triggered) for conforming values except for the ACPI
* SCI for which we use Active Lo, Level Triggered.
*/
static enum intr_polarity
interrupt_polarity(UINT16 IntiFlags, UINT8 Source)
{
switch (IntiFlags & ACPI_MADT_POLARITY_MASK) {
case ACPI_MADT_POLARITY_CONFORMS:
if (Source == AcpiGbl_FADT.SciInterrupt)
return (INTR_POLARITY_LOW);
else
return (INTR_POLARITY_HIGH);
case ACPI_MADT_POLARITY_ACTIVE_HIGH:
return (INTR_POLARITY_HIGH);
case ACPI_MADT_POLARITY_ACTIVE_LOW:
return (INTR_POLARITY_LOW);
default:
panic("Bogus Interrupt Polarity");
}
}
static enum intr_trigger
interrupt_trigger(UINT16 IntiFlags, UINT8 Source)
{
switch (IntiFlags & ACPI_MADT_TRIGGER_MASK) {
case ACPI_MADT_TRIGGER_CONFORMS:
if (Source == AcpiGbl_FADT.SciInterrupt)
return (INTR_TRIGGER_LEVEL);
else
return (INTR_TRIGGER_EDGE);
case ACPI_MADT_TRIGGER_EDGE:
return (INTR_TRIGGER_EDGE);
case ACPI_MADT_TRIGGER_LEVEL:
return (INTR_TRIGGER_LEVEL);
default:
panic("Bogus Interrupt Trigger Mode");
}
}
/*
* Find the local APIC ID associated with a given ACPI Processor ID.
*/
static int
madt_find_cpu(u_int acpi_id, u_int *apic_id)
{
int i;
for (i = 0; i <= MAX_APIC_ID; i++) {
if (!lapics[i].la_enabled)
continue;
if (lapics[i].la_acpi_id != acpi_id)
continue;
*apic_id = i;
return (0);
}
return (ENOENT);
}
/*
* Find the IO APIC and pin on that APIC associated with a given global
* interrupt.
*/
static int
madt_find_interrupt(int intr, void **apic, u_int *pin)
{
int i, best;
best = -1;
for (i = 0; i <= MAX_APIC_ID; i++) {
if (ioapics[i].io_apic == NULL ||
ioapics[i].io_vector > intr)
continue;
if (best == -1 ||
ioapics[best].io_vector < ioapics[i].io_vector)
best = i;
}
if (best == -1)
return (ENOENT);
*apic = ioapics[best].io_apic;
*pin = intr - ioapics[best].io_vector;
if (*pin > 32)
printf("WARNING: Found intpin of %u for vector %d\n", *pin,
intr);
return (0);
}
/*
* Parse an interrupt source override for an ISA interrupt.
*/
static void
madt_parse_interrupt_override(ACPI_MADT_INTERRUPT_OVERRIDE *intr)
{
void *new_ioapic, *old_ioapic;
u_int new_pin, old_pin;
enum intr_trigger trig;
enum intr_polarity pol;
char buf[64];
if (acpi_quirks & ACPI_Q_MADT_IRQ0 && intr->SourceIrq == 0 &&
intr->GlobalIrq == 2) {
if (bootverbose)
printf("MADT: Skipping timer override\n");
return;
}
if (bootverbose)
printf("MADT: Interrupt override: source %u, irq %u\n",
intr->SourceIrq, intr->GlobalIrq);
KASSERT(intr->Bus == 0, ("bus for interrupt overrides must be zero"));
if (madt_find_interrupt(intr->GlobalIrq, &new_ioapic, &new_pin) != 0) {
printf("MADT: Could not find APIC for vector %u (IRQ %u)\n",
intr->GlobalIrq, intr->SourceIrq);
return;
}
/*
* Lookup the appropriate trigger and polarity modes for this
* entry.
*/
trig = interrupt_trigger(intr->IntiFlags, intr->SourceIrq);
pol = interrupt_polarity(intr->IntiFlags, intr->SourceIrq);
/*
* If the SCI is identity mapped but has edge trigger and
* active-hi polarity or the force_sci_lo tunable is set,
* force it to use level/lo.
*/
if (intr->SourceIrq == AcpiGbl_FADT.SciInterrupt) {
madt_found_sci_override = 1;
if (getenv_string("hw.acpi.sci.trigger", buf, sizeof(buf))) {
if (tolower(buf[0]) == 'e')
trig = INTR_TRIGGER_EDGE;
else if (tolower(buf[0]) == 'l')
trig = INTR_TRIGGER_LEVEL;
else
panic(
"Invalid trigger %s: must be 'edge' or 'level'",
buf);
printf("MADT: Forcing SCI to %s trigger\n",
trig == INTR_TRIGGER_EDGE ? "edge" : "level");
}
if (getenv_string("hw.acpi.sci.polarity", buf, sizeof(buf))) {
if (tolower(buf[0]) == 'h')
pol = INTR_POLARITY_HIGH;
else if (tolower(buf[0]) == 'l')
pol = INTR_POLARITY_LOW;
else
panic(
"Invalid polarity %s: must be 'high' or 'low'",
buf);
printf("MADT: Forcing SCI to active %s polarity\n",
pol == INTR_POLARITY_HIGH ? "high" : "low");
}
}
/* Remap the IRQ if it is mapped to a different interrupt vector. */
if (intr->SourceIrq != intr->GlobalIrq) {
/*
* If the SCI is remapped to a non-ISA global interrupt,
* then override the vector we use to setup and allocate
* the interrupt.
*/
if (intr->GlobalIrq > 15 &&
intr->SourceIrq == AcpiGbl_FADT.SciInterrupt)
acpi_OverrideInterruptLevel(intr->GlobalIrq);
else
ioapic_remap_vector(new_ioapic, new_pin,
intr->SourceIrq);
if (madt_find_interrupt(intr->SourceIrq, &old_ioapic,
&old_pin) != 0)
printf("MADT: Could not find APIC for source IRQ %u\n",
intr->SourceIrq);
else if (ioapic_get_vector(old_ioapic, old_pin) ==
intr->SourceIrq)
ioapic_disable_pin(old_ioapic, old_pin);
}
/* Program the polarity and trigger mode. */
ioapic_set_triggermode(new_ioapic, new_pin, trig);
ioapic_set_polarity(new_ioapic, new_pin, pol);
}
/*
* Parse an entry for an NMI routed to an IO APIC.
*/
static void
madt_parse_nmi(ACPI_MADT_NMI_SOURCE *nmi)
{
void *ioapic;
u_int pin;
if (madt_find_interrupt(nmi->GlobalIrq, &ioapic, &pin) != 0) {
printf("MADT: Could not find APIC for vector %u\n",
nmi->GlobalIrq);
return;
}
ioapic_set_nmi(ioapic, pin);
if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
ioapic_set_triggermode(ioapic, pin,
interrupt_trigger(nmi->IntiFlags, 0));
if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
ioapic_set_polarity(ioapic, pin,
interrupt_polarity(nmi->IntiFlags, 0));
}
/*
* Parse an entry for an NMI routed to a local APIC LVT pin.
*/
static void
madt_parse_local_nmi(ACPI_MADT_LOCAL_APIC_NMI *nmi)
{
u_int apic_id, pin;
if (nmi->ProcessorId == 0xff)
apic_id = APIC_ID_ALL;
else if (madt_find_cpu(nmi->ProcessorId, &apic_id) != 0) {
if (bootverbose)
printf("MADT: Ignoring local NMI routed to "
"ACPI CPU %u\n", nmi->ProcessorId);
return;
}
if (nmi->Lint == 0)
pin = LVT_LINT0;
else
pin = LVT_LINT1;
lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_NMI);
if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS))
lapic_set_lvt_triggermode(apic_id, pin,
interrupt_trigger(nmi->IntiFlags, 0));
if (!(nmi->IntiFlags & ACPI_MADT_POLARITY_CONFORMS))
lapic_set_lvt_polarity(apic_id, pin,
interrupt_polarity(nmi->IntiFlags, 0));
}
/*
* Parse interrupt entries.
*/
static void
madt_parse_ints(ACPI_SUBTABLE_HEADER *entry, void *arg __unused)
{
switch (entry->Type) {
case ACPI_MADT_TYPE_INTERRUPT_OVERRIDE:
madt_parse_interrupt_override(
(ACPI_MADT_INTERRUPT_OVERRIDE *)entry);
break;
case ACPI_MADT_TYPE_NMI_SOURCE:
madt_parse_nmi((ACPI_MADT_NMI_SOURCE *)entry);
break;
case ACPI_MADT_TYPE_LOCAL_APIC_NMI:
madt_parse_local_nmi((ACPI_MADT_LOCAL_APIC_NMI *)entry);
break;
}
}
/*
* Setup per-CPU ACPI IDs.
*/
static void
madt_set_ids(void *dummy)
{
struct lapic_info *la;
struct pcpu *pc;
u_int i;
if (madt == NULL)
return;
CPU_FOREACH(i) {
pc = pcpu_find(i);
KASSERT(pc != NULL, ("no pcpu data for CPU %u", i));
la = &lapics[pc->pc_apic_id];
if (!la->la_enabled)
panic("APIC: CPU with APIC ID %u is not enabled",
pc->pc_apic_id);
pc->pc_acpi_id = la->la_acpi_id;
if (bootverbose)
printf("APIC: CPU %u has ACPI ID %u\n", i,
la->la_acpi_id);
}
}
SYSINIT(madt_set_ids, SI_SUB_CPU, SI_ORDER_ANY, madt_set_ids, NULL);