Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/run/@/dev/mii/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/run/@/dev/mii/tdkphy.c |
/*- * Copyright (c) 2000,2001 Jonathan Chen. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/dev/mii/tdkphy.c 229093 2011-12-31 14:12:12Z hselasky $"); /* * Driver for the TDK 78Q2120 MII * * References: * Datasheet for the 78Q2120 - http://www.tsc.tdk.com/lan/78q2120.pdf * Most of this code stolen from ukphy.c */ /* * The TDK 78Q2120 is found on some Xircom X3201 based CardBus cards, * also spotted on some 3C575 cards. It's just like any other normal * phy, except it does auto negotiation in a different way. */ #include <sys/param.h> #include <sys/systm.h> #include <sys/kernel.h> #include <sys/socket.h> #include <sys/errno.h> #include <sys/module.h> #include <sys/bus.h> #include <net/if.h> #include <net/if_media.h> #include <dev/mii/mii.h> #include <dev/mii/miivar.h> #include "miidevs.h" #include <dev/mii/tdkphyreg.h> #include "miibus_if.h" static int tdkphy_probe(device_t); static int tdkphy_attach(device_t); static device_method_t tdkphy_methods[] = { /* device interface */ DEVMETHOD(device_probe, tdkphy_probe), DEVMETHOD(device_attach, tdkphy_attach), DEVMETHOD(device_detach, mii_phy_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD_END }; static devclass_t tdkphy_devclass; static driver_t tdkphy_driver = { "tdkphy", tdkphy_methods, sizeof(struct mii_softc) }; DRIVER_MODULE(tdkphy, miibus, tdkphy_driver, tdkphy_devclass, 0, 0); static int tdkphy_service(struct mii_softc *, struct mii_data *, int); static void tdkphy_status(struct mii_softc *); static const struct mii_phydesc tdkphys[] = { MII_PHY_DESC(xxTSC, 78Q2120), MII_PHY_END }; static const struct mii_phy_funcs tdkphy_funcs = { tdkphy_service, tdkphy_status, mii_phy_reset }; static int tdkphy_probe(device_t dev) { return (mii_phy_dev_probe(dev, tdkphys, BUS_PROBE_DEFAULT)); } static int tdkphy_attach(device_t dev) { mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &tdkphy_funcs, 1); return (0); } static int tdkphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) { switch (cmd) { case MII_POLLSTAT: break; case MII_MEDIACHG: /* * If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; mii_phy_setmedia(sc); break; case MII_TICK: if (mii_phy_tick(sc) == EJUSTRETURN) return (0); break; } /* Update the media status. */ PHY_STATUS(sc); if (sc->mii_pdata->mii_media_active & IFM_FDX) PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) | BMCR_FDX); else PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) & ~BMCR_FDX); /* Callback if something changed. */ mii_phy_update(sc, cmd); return (0); } static void tdkphy_status(struct mii_softc *phy) { struct mii_data *mii = phy->mii_pdata; struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int bmsr, bmcr, anlpar, diag; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(phy, MII_BMSR) | PHY_READ(phy, MII_BMSR); if (bmsr & BMSR_LINK) mii->mii_media_status |= IFM_ACTIVE; bmcr = PHY_READ(phy, MII_BMCR); if (bmcr & BMCR_ISO) { mii->mii_media_active |= IFM_NONE; mii->mii_media_status = 0; return; } if (bmcr & BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; if (bmcr & BMCR_AUTOEN) { /* * NWay autonegotiation takes the highest-order common * bit of the ANAR and ANLPAR (i.e. best media advertised * both by us and our link partner). */ if ((bmsr & BMSR_ACOMP) == 0) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } anlpar = PHY_READ(phy, MII_ANAR) & PHY_READ(phy, MII_ANLPAR); /* * ANLPAR doesn't get set on my card, but we check it anyway, * since it is mentioned in the 78Q2120 specs. */ if (anlpar & ANLPAR_TX_FD) mii->mii_media_active |= IFM_100_TX|IFM_FDX; else if (anlpar & ANLPAR_T4) mii->mii_media_active |= IFM_100_T4|IFM_HDX; else if (anlpar & ANLPAR_TX) mii->mii_media_active |= IFM_100_TX|IFM_HDX; else if (anlpar & ANLPAR_10_FD) mii->mii_media_active |= IFM_10_T|IFM_FDX; else if (anlpar & ANLPAR_10) mii->mii_media_active |= IFM_10_T|IFM_HDX; else { /* * ANLPAR isn't set, which leaves two possibilities: * 1) Auto negotiation failed * 2) Auto negotiation completed, but the card forgot * to set ANLPAR. * So we check the MII_DIAG(18) register... */ diag = PHY_READ(phy, MII_DIAG); if (diag & DIAG_NEGFAIL) /* assume 10baseT if no neg */ mii->mii_media_active |= IFM_10_T|IFM_HDX; else { if (diag & DIAG_DUPLEX) mii->mii_media_active |= IFM_FDX; else mii->mii_media_active |= IFM_HDX; if (diag & DIAG_RATE_100) mii->mii_media_active |= IFM_100_TX; else mii->mii_media_active |= IFM_10_T; } } if ((mii->mii_media_active & IFM_FDX) != 0) mii->mii_media_active |= mii_phy_flowstatus(phy); } else mii->mii_media_active = ife->ifm_media; }