| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/run/@/powerpc/powermac/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/run/@/powerpc/powermac/cpcht.c |
/*-
* Copyright (C) 2008-2010 Nathan Whitehorn
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/powerpc/powermac/cpcht.c 235060 2012-05-05 16:41:17Z nwhitehorn $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/pciio.h>
#include <sys/rman.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_pci.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <machine/bus.h>
#include <machine/intr_machdep.h>
#include <machine/md_var.h>
#include <machine/openpicvar.h>
#include <machine/pio.h>
#include <machine/resource.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <powerpc/ofw/ofw_pci.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include "pcib_if.h"
#include "pic_if.h"
/*
* IBM CPC9X5 Hypertransport Device interface.
*/
static int cpcht_probe(device_t);
static int cpcht_attach(device_t);
static void cpcht_configure_htbridge(device_t, phandle_t);
/*
* pcib interface.
*/
static u_int32_t cpcht_read_config(device_t, u_int, u_int, u_int,
u_int, int);
static void cpcht_write_config(device_t, u_int, u_int, u_int,
u_int, u_int32_t, int);
static int cpcht_route_interrupt(device_t, device_t, int);
static int cpcht_alloc_msi(device_t dev, device_t child,
int count, int maxcount, int *irqs);
static int cpcht_release_msi(device_t dev, device_t child,
int count, int *irqs);
static int cpcht_alloc_msix(device_t dev, device_t child,
int *irq);
static int cpcht_release_msix(device_t dev, device_t child,
int irq);
static int cpcht_map_msi(device_t dev, device_t child,
int irq, uint64_t *addr, uint32_t *data);
/*
* Driver methods.
*/
static device_method_t cpcht_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, cpcht_probe),
DEVMETHOD(device_attach, cpcht_attach),
/* pcib interface */
DEVMETHOD(pcib_read_config, cpcht_read_config),
DEVMETHOD(pcib_write_config, cpcht_write_config),
DEVMETHOD(pcib_route_interrupt, cpcht_route_interrupt),
DEVMETHOD(pcib_alloc_msi, cpcht_alloc_msi),
DEVMETHOD(pcib_release_msi, cpcht_release_msi),
DEVMETHOD(pcib_alloc_msix, cpcht_alloc_msix),
DEVMETHOD(pcib_release_msix, cpcht_release_msix),
DEVMETHOD(pcib_map_msi, cpcht_map_msi),
DEVMETHOD_END
};
struct cpcht_irq {
enum {
IRQ_NONE, IRQ_HT, IRQ_MSI, IRQ_INTERNAL
} irq_type;
int ht_source;
vm_offset_t ht_base;
vm_offset_t apple_eoi;
uint32_t eoi_data;
int edge;
};
static struct cpcht_irq *cpcht_irqmap = NULL;
uint32_t cpcht_msipic = 0;
struct cpcht_softc {
struct ofw_pci_softc pci_sc;
vm_offset_t sc_data;
uint64_t sc_populated_slots;
struct cpcht_irq htirq_map[128];
struct mtx htirq_mtx;
};
static devclass_t cpcht_devclass;
DEFINE_CLASS_1(pcib, cpcht_driver, cpcht_methods, sizeof(struct cpcht_softc),
ofw_pci_driver);
DRIVER_MODULE(cpcht, nexus, cpcht_driver, cpcht_devclass, 0, 0);
#define CPCHT_IOPORT_BASE 0xf4000000UL /* Hardwired */
#define CPCHT_IOPORT_SIZE 0x00400000UL
#define HTAPIC_REQUEST_EOI 0x20
#define HTAPIC_TRIGGER_LEVEL 0x02
#define HTAPIC_MASK 0x01
static int
cpcht_probe(device_t dev)
{
const char *type, *compatible;
type = ofw_bus_get_type(dev);
compatible = ofw_bus_get_compat(dev);
if (type == NULL || compatible == NULL)
return (ENXIO);
if (strcmp(type, "ht") != 0)
return (ENXIO);
if (strcmp(compatible, "u3-ht") != 0)
return (ENXIO);
device_set_desc(dev, "IBM CPC9X5 HyperTransport Tunnel");
return (0);
}
static int
cpcht_attach(device_t dev)
{
struct cpcht_softc *sc;
phandle_t node, child;
u_int32_t reg[3];
int i;
node = ofw_bus_get_node(dev);
sc = device_get_softc(dev);
if (OF_getprop(node, "reg", reg, sizeof(reg)) < 12)
return (ENXIO);
if (OF_getproplen(node, "ranges") <= 0)
sc->pci_sc.sc_quirks = OFW_PCI_QUIRK_RANGES_ON_CHILDREN;
sc->sc_populated_slots = 0;
sc->sc_data = (vm_offset_t)pmap_mapdev(reg[1], reg[2]);
/*
* Set up the resource manager and the HT->MPIC mapping. For cpcht,
* the ranges are properties of the child bridges, and this is also
* where we get the HT interrupts properties.
*/
#if 0
/* I/O port mappings are usually not in the device tree */
rman_manage_region(&sc->pci_sc.sc_io_rman, 0, CPCHT_IOPORT_SIZE - 1);
#endif
bzero(sc->htirq_map, sizeof(sc->htirq_map));
mtx_init(&sc->htirq_mtx, "cpcht irq", NULL, MTX_DEF);
for (i = 0; i < 8; i++)
sc->htirq_map[i].irq_type = IRQ_INTERNAL;
for (child = OF_child(node); child != 0; child = OF_peer(child))
cpcht_configure_htbridge(dev, child);
/* Now make the mapping table available to the MPIC */
cpcht_irqmap = sc->htirq_map;
return (ofw_pci_attach(dev));
}
static void
cpcht_configure_htbridge(device_t dev, phandle_t child)
{
struct cpcht_softc *sc;
struct ofw_pci_register pcir;
int ptr, nextptr;
uint32_t vend, val;
int i, nirq, irq;
u_int b, f, s;
sc = device_get_softc(dev);
if (OF_getprop(child, "reg", &pcir, sizeof(pcir)) == -1)
return;
b = OFW_PCI_PHYS_HI_BUS(pcir.phys_hi);
s = OFW_PCI_PHYS_HI_DEVICE(pcir.phys_hi);
f = OFW_PCI_PHYS_HI_FUNCTION(pcir.phys_hi);
/*
* Mark this slot is populated. The remote south bridge does
* not like us talking to unpopulated slots on the root bus.
*/
sc->sc_populated_slots |= (1 << s);
/*
* Next build up any HT->MPIC mappings for this sub-bus. One would
* naively hope that enabling, disabling, and EOIing interrupts would
* cause the appropriate HT bus transactions to that effect. This is
* not the case.
*
* Instead, we have to muck about on the HT peer's root PCI bridges,
* figure out what interrupts they send, enable them, and cache
* the location of their WaitForEOI registers so that we can
* send EOIs later.
*/
/* All the devices we are interested in have caps */
if (!(PCIB_READ_CONFIG(dev, b, s, f, PCIR_STATUS, 2)
& PCIM_STATUS_CAPPRESENT))
return;
nextptr = PCIB_READ_CONFIG(dev, b, s, f, PCIR_CAP_PTR, 1);
while (nextptr != 0) {
ptr = nextptr;
nextptr = PCIB_READ_CONFIG(dev, b, s, f,
ptr + PCICAP_NEXTPTR, 1);
/* Find the HT IRQ capabilities */
if (PCIB_READ_CONFIG(dev, b, s, f,
ptr + PCICAP_ID, 1) != PCIY_HT)
continue;
val = PCIB_READ_CONFIG(dev, b, s, f, ptr + PCIR_HT_COMMAND, 2);
if ((val & PCIM_HTCMD_CAP_MASK) != PCIM_HTCAP_INTERRUPT)
continue;
/* Ask for the IRQ count */
PCIB_WRITE_CONFIG(dev, b, s, f, ptr + PCIR_HT_COMMAND, 0x1, 1);
nirq = PCIB_READ_CONFIG(dev, b, s, f, ptr + 4, 4);
nirq = ((nirq >> 16) & 0xff) + 1;
device_printf(dev, "%d HT IRQs on device %d.%d\n", nirq, s, f);
for (i = 0; i < nirq; i++) {
PCIB_WRITE_CONFIG(dev, b, s, f,
ptr + PCIR_HT_COMMAND, 0x10 + (i << 1), 1);
irq = PCIB_READ_CONFIG(dev, b, s, f, ptr + 4, 4);
/*
* Mask this interrupt for now.
*/
PCIB_WRITE_CONFIG(dev, b, s, f, ptr + 4,
irq | HTAPIC_MASK, 4);
irq = (irq >> 16) & 0xff;
sc->htirq_map[irq].irq_type = IRQ_HT;
sc->htirq_map[irq].ht_source = i;
sc->htirq_map[irq].ht_base = sc->sc_data +
(((((s & 0x1f) << 3) | (f & 0x07)) << 8) | (ptr));
PCIB_WRITE_CONFIG(dev, b, s, f,
ptr + PCIR_HT_COMMAND, 0x11 + (i << 1), 1);
sc->htirq_map[irq].eoi_data =
PCIB_READ_CONFIG(dev, b, s, f, ptr + 4, 4) |
0x80000000;
/*
* Apple uses a non-compliant IO/APIC that differs
* in how we signal EOIs. Check if this device was
* made by Apple, and act accordingly.
*/
vend = PCIB_READ_CONFIG(dev, b, s, f,
PCIR_DEVVENDOR, 4);
if ((vend & 0xffff) == 0x106b)
sc->htirq_map[irq].apple_eoi =
(sc->htirq_map[irq].ht_base - ptr) + 0x60;
}
}
}
static u_int32_t
cpcht_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
int width)
{
struct cpcht_softc *sc;
vm_offset_t caoff;
sc = device_get_softc(dev);
caoff = sc->sc_data +
(((((slot & 0x1f) << 3) | (func & 0x07)) << 8) | reg);
if (bus == 0 && (!(sc->sc_populated_slots & (1 << slot)) || func > 0))
return (0xffffffff);
if (bus > 0)
caoff += 0x01000000UL + (bus << 16);
switch (width) {
case 1:
return (in8rb(caoff));
break;
case 2:
return (in16rb(caoff));
break;
case 4:
return (in32rb(caoff));
break;
}
return (0xffffffff);
}
static void
cpcht_write_config(device_t dev, u_int bus, u_int slot, u_int func,
u_int reg, u_int32_t val, int width)
{
struct cpcht_softc *sc;
vm_offset_t caoff;
sc = device_get_softc(dev);
caoff = sc->sc_data +
(((((slot & 0x1f) << 3) | (func & 0x07)) << 8) | reg);
if (bus == 0 && (!(sc->sc_populated_slots & (1 << slot)) || func > 0))
return;
if (bus > 0)
caoff += 0x01000000UL + (bus << 16);
switch (width) {
case 1:
out8rb(caoff, val);
break;
case 2:
out16rb(caoff, val);
break;
case 4:
out32rb(caoff, val);
break;
}
}
static int
cpcht_route_interrupt(device_t bus, device_t dev, int pin)
{
return (pin);
}
static int
cpcht_alloc_msi(device_t dev, device_t child, int count, int maxcount,
int *irqs)
{
struct cpcht_softc *sc;
int i, j;
sc = device_get_softc(dev);
j = 0;
/* Bail if no MSI PIC yet */
if (cpcht_msipic == 0)
return (ENXIO);
mtx_lock(&sc->htirq_mtx);
for (i = 8; i < 124 - count; i++) {
for (j = 0; j < count; j++) {
if (sc->htirq_map[i+j].irq_type != IRQ_NONE)
break;
}
if (j == count)
break;
i += j; /* We know there isn't a large enough run */
}
if (j != count) {
mtx_unlock(&sc->htirq_mtx);
return (ENXIO);
}
for (j = 0; j < count; j++) {
irqs[j] = MAP_IRQ(cpcht_msipic, i+j);
sc->htirq_map[i+j].irq_type = IRQ_MSI;
}
mtx_unlock(&sc->htirq_mtx);
return (0);
}
static int
cpcht_release_msi(device_t dev, device_t child, int count, int *irqs)
{
struct cpcht_softc *sc;
int i;
sc = device_get_softc(dev);
mtx_lock(&sc->htirq_mtx);
for (i = 0; i < count; i++)
sc->htirq_map[irqs[i] & 0xff].irq_type = IRQ_NONE;
mtx_unlock(&sc->htirq_mtx);
return (0);
}
static int
cpcht_alloc_msix(device_t dev, device_t child, int *irq)
{
struct cpcht_softc *sc;
int i;
sc = device_get_softc(dev);
/* Bail if no MSI PIC yet */
if (cpcht_msipic == 0)
return (ENXIO);
mtx_lock(&sc->htirq_mtx);
for (i = 8; i < 124; i++) {
if (sc->htirq_map[i].irq_type == IRQ_NONE) {
sc->htirq_map[i].irq_type = IRQ_MSI;
*irq = MAP_IRQ(cpcht_msipic, i);
mtx_unlock(&sc->htirq_mtx);
return (0);
}
}
mtx_unlock(&sc->htirq_mtx);
return (ENXIO);
}
static int
cpcht_release_msix(device_t dev, device_t child, int irq)
{
struct cpcht_softc *sc;
sc = device_get_softc(dev);
mtx_lock(&sc->htirq_mtx);
sc->htirq_map[irq & 0xff].irq_type = IRQ_NONE;
mtx_unlock(&sc->htirq_mtx);
return (0);
}
static int
cpcht_map_msi(device_t dev, device_t child, int irq, uint64_t *addr,
uint32_t *data)
{
device_t pcib;
struct pci_devinfo *dinfo;
struct pcicfg_ht *ht = NULL;
for (pcib = child; pcib != dev; pcib =
device_get_parent(device_get_parent(pcib))) {
dinfo = device_get_ivars(pcib);
ht = &dinfo->cfg.ht;
if (ht == NULL)
continue;
}
if (ht == NULL)
return (ENXIO);
*addr = ht->ht_msiaddr;
*data = irq & 0xff;
return (0);
}
/*
* Driver for the integrated MPIC on U3/U4 (CPC925/CPC945)
*/
static int openpic_cpcht_probe(device_t);
static int openpic_cpcht_attach(device_t);
static void openpic_cpcht_config(device_t, u_int irq,
enum intr_trigger trig, enum intr_polarity pol);
static void openpic_cpcht_enable(device_t, u_int irq, u_int vector);
static void openpic_cpcht_unmask(device_t, u_int irq);
static void openpic_cpcht_eoi(device_t, u_int irq);
static device_method_t openpic_cpcht_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, openpic_cpcht_probe),
DEVMETHOD(device_attach, openpic_cpcht_attach),
/* PIC interface */
DEVMETHOD(pic_bind, openpic_bind),
DEVMETHOD(pic_config, openpic_cpcht_config),
DEVMETHOD(pic_dispatch, openpic_dispatch),
DEVMETHOD(pic_enable, openpic_cpcht_enable),
DEVMETHOD(pic_eoi, openpic_cpcht_eoi),
DEVMETHOD(pic_ipi, openpic_ipi),
DEVMETHOD(pic_mask, openpic_mask),
DEVMETHOD(pic_unmask, openpic_cpcht_unmask),
{ 0, 0 },
};
struct openpic_cpcht_softc {
struct openpic_softc sc_openpic;
struct mtx sc_ht_mtx;
};
static driver_t openpic_cpcht_driver = {
"htpic",
openpic_cpcht_methods,
sizeof(struct openpic_cpcht_softc),
};
DRIVER_MODULE(openpic, unin, openpic_cpcht_driver, openpic_devclass, 0, 0);
static int
openpic_cpcht_probe(device_t dev)
{
const char *type = ofw_bus_get_type(dev);
if (strcmp(type, "open-pic") != 0)
return (ENXIO);
device_set_desc(dev, OPENPIC_DEVSTR);
return (0);
}
static int
openpic_cpcht_attach(device_t dev)
{
struct openpic_cpcht_softc *sc;
phandle_t node;
int err, irq;
node = ofw_bus_get_node(dev);
err = openpic_common_attach(dev, node);
if (err != 0)
return (err);
/*
* The HT APIC stuff is not thread-safe, so we need a mutex to
* protect it.
*/
sc = device_get_softc(dev);
mtx_init(&sc->sc_ht_mtx, "htpic", NULL, MTX_SPIN);
/*
* Interrupts 0-3 are internally sourced and are level triggered
* active low. Interrupts 4-123 are connected to a pulse generator
* and should be programmed as edge triggered low-to-high.
*
* IBM CPC945 Manual, Section 9.3.
*/
for (irq = 0; irq < 4; irq++)
openpic_config(dev, irq, INTR_TRIGGER_LEVEL, INTR_POLARITY_LOW);
for (irq = 4; irq < 124; irq++)
openpic_config(dev, irq, INTR_TRIGGER_EDGE, INTR_POLARITY_LOW);
/*
* Use this PIC for MSI only if it is the root PIC. This may not
* be necessary, but Linux does it, and I cannot find any U3 machines
* with MSI devices to test.
*/
if (dev == root_pic)
cpcht_msipic = node;
return (0);
}
static void
openpic_cpcht_config(device_t dev, u_int irq, enum intr_trigger trig,
enum intr_polarity pol)
{
struct openpic_cpcht_softc *sc;
uint32_t ht_irq;
/*
* The interrupt settings for the MPIC are completely determined
* by the internal wiring in the northbridge. Real changes to these
* settings need to be negotiated with the remote IO-APIC on the HT
* link.
*/
sc = device_get_softc(dev);
if (cpcht_irqmap != NULL && irq < 128 &&
cpcht_irqmap[irq].ht_base > 0 && !cpcht_irqmap[irq].edge) {
mtx_lock_spin(&sc->sc_ht_mtx);
/* Program the data port */
out8rb(cpcht_irqmap[irq].ht_base + PCIR_HT_COMMAND,
0x10 + (cpcht_irqmap[irq].ht_source << 1));
/* Grab the IRQ config register */
ht_irq = in32rb(cpcht_irqmap[irq].ht_base + 4);
/* Mask the IRQ while we fiddle settings */
out32rb(cpcht_irqmap[irq].ht_base + 4, ht_irq | HTAPIC_MASK);
/* Program the interrupt sense */
ht_irq &= ~(HTAPIC_TRIGGER_LEVEL | HTAPIC_REQUEST_EOI);
if (trig == INTR_TRIGGER_EDGE) {
cpcht_irqmap[irq].edge = 1;
} else {
cpcht_irqmap[irq].edge = 0;
ht_irq |= HTAPIC_TRIGGER_LEVEL | HTAPIC_REQUEST_EOI;
}
out32rb(cpcht_irqmap[irq].ht_base + 4, ht_irq);
mtx_unlock_spin(&sc->sc_ht_mtx);
}
}
static void
openpic_cpcht_enable(device_t dev, u_int irq, u_int vec)
{
struct openpic_cpcht_softc *sc;
uint32_t ht_irq;
openpic_enable(dev, irq, vec);
sc = device_get_softc(dev);
if (cpcht_irqmap != NULL && irq < 128 &&
cpcht_irqmap[irq].ht_base > 0) {
mtx_lock_spin(&sc->sc_ht_mtx);
/* Program the data port */
out8rb(cpcht_irqmap[irq].ht_base + PCIR_HT_COMMAND,
0x10 + (cpcht_irqmap[irq].ht_source << 1));
/* Unmask the interrupt */
ht_irq = in32rb(cpcht_irqmap[irq].ht_base + 4);
ht_irq &= ~HTAPIC_MASK;
out32rb(cpcht_irqmap[irq].ht_base + 4, ht_irq);
mtx_unlock_spin(&sc->sc_ht_mtx);
}
openpic_cpcht_eoi(dev, irq);
}
static void
openpic_cpcht_unmask(device_t dev, u_int irq)
{
struct openpic_cpcht_softc *sc;
uint32_t ht_irq;
openpic_unmask(dev, irq);
sc = device_get_softc(dev);
if (cpcht_irqmap != NULL && irq < 128 &&
cpcht_irqmap[irq].ht_base > 0) {
mtx_lock_spin(&sc->sc_ht_mtx);
/* Program the data port */
out8rb(cpcht_irqmap[irq].ht_base + PCIR_HT_COMMAND,
0x10 + (cpcht_irqmap[irq].ht_source << 1));
/* Unmask the interrupt */
ht_irq = in32rb(cpcht_irqmap[irq].ht_base + 4);
ht_irq &= ~HTAPIC_MASK;
out32rb(cpcht_irqmap[irq].ht_base + 4, ht_irq);
mtx_unlock_spin(&sc->sc_ht_mtx);
}
openpic_cpcht_eoi(dev, irq);
}
static void
openpic_cpcht_eoi(device_t dev, u_int irq)
{
struct openpic_cpcht_softc *sc;
uint32_t off, mask;
if (irq == 255)
return;
sc = device_get_softc(dev);
if (cpcht_irqmap != NULL && irq < 128 &&
cpcht_irqmap[irq].ht_base > 0 && !cpcht_irqmap[irq].edge) {
/* If this is an HT IRQ, acknowledge it at the remote APIC */
if (cpcht_irqmap[irq].apple_eoi) {
off = (cpcht_irqmap[irq].ht_source >> 3) & ~3;
mask = 1 << (cpcht_irqmap[irq].ht_source & 0x1f);
out32rb(cpcht_irqmap[irq].apple_eoi + off, mask);
} else {
mtx_lock_spin(&sc->sc_ht_mtx);
out8rb(cpcht_irqmap[irq].ht_base + PCIR_HT_COMMAND,
0x11 + (cpcht_irqmap[irq].ht_source << 1));
out32rb(cpcht_irqmap[irq].ht_base + 4,
cpcht_irqmap[irq].eoi_data);
mtx_unlock_spin(&sc->sc_ht_mtx);
}
}
openpic_eoi(dev, irq);
}