| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/ucom/@/contrib/octeon-sdk/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/ucom/@/contrib/octeon-sdk/cvmx-raid.h |
/***********************license start***************
* Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Networks nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Interface to RAID block. This is not available on all chips.
*
* <hr>$Revision: 49448 $<hr>
*/
#ifndef __CVMX_RAID_H__
#define __CVMX_RAID_H__
#ifdef __cplusplus
extern "C" {
#endif
/**
* This structure defines the type of command words the RAID block
* will accept.
*/
typedef union
{
uint64_t u64;
struct
{
uint64_t reserved_37_63 : 27; /**< Must be zero */
uint64_t q_cmp : 1; /**< Indicates whether the Q pipe is in normal mode (CWORD[Q_CMP]=0) or in non-zero
byte detect mode (CWORD[Q_CMP]=1).
In non-zero byte detect mode, the Q OWORD[PTR] result is the non-zero detect
result, which indicates the position of the first non-zero byte in the pipe result bytes.
CWORD[Q_CMP] must not be set when CWORD[QOUT]=0, and must not be set
when CWORD[Q_XOR] is set. */
uint64_t p_cmp : 1; /**< Indicates whether the P pipe is in normal mode (CWORD[P_CMP]=0) or in non-zero
byte detect mode (CWORD[P_CMP]=1).
In non-zero byte detect mode, the P OWORD[PTR] result is the non-zero detect
result, which indicates the position of the first non-zero byte in the pipe result bytes.
CWORD[P_CMP] must not be set when CWORD[POUT]=0, and must not be set
when CWORD[P_XOR] is set. */
uint64_t q_xor : 1; /**< Indicates whether the Q output buffer bytes are the normal Q pipe result or the
normal Q pipe result exclusive-OR'ed with the P pipe result.
When CWORD[Q_XOR]=0 (and CWORD[Q_CMP]=0), the Q output buffer bytes are
the normal Q pipe result, which does not include the P pipe result in any way.
When CWORD[Q_XOR]=1, the Q output buffer bytes are the normal Q pipe result
exclusive-OR'ed with the P pipe result, as if the P pipe result were another Q IWORD
for the Q pipe with QMULT=1.
CWORD[Q_XOR] must not be set unless both CWORD[POUT,QOUT] are set, and
must not be set when CWORD[Q_CMP] is set. */
uint64_t p_xor : 1; /**< Indicates whether the P output buffer bytes are the normal P pipe result or the
normal P pipe result exclusive-OR'ed with the Q pipe result.
When CWORD[P_XOR]=0 (and CWORD[P_CMP]=0), the P output buffer bytes are
the normal P pipe result, which does not include the Q pipe result in any way.
When CWORD[P_XOR]=1, the P output buffer bytes are the normal P pipe result
exclusive-OR'ed with the Q pipe result, as if the Q pipe result were another P
IWORD for the P pipe.
CWORD[P_XOR] must not be set unless both CWORD[POUT,QOUT] are set, and
must not be set when CWORD[P_CMP] is set. */
uint64_t wqe : 1; /**< Indicates whether RAD submits a work queue entry or writes an L2/DRAM byte to
zero after completing the instruction.
When CWORD[WQE] is set and RESP[PTR]!=0, RAD adds the work queue entry
indicated by RESP[PTR] to the selected POW input queue after completing the
instruction.
When CWORD[WQE] is clear and RESP[PTR]!=0, RAD writes the L2/DRAM byte
indicated by RESP[PTR] to zero after completing the instruction. */
uint64_t qout : 1; /**< Indicates whether the Q pipe is used by this instruction.
If CWORD[QOUT] is set, IWORD[QEN] must be set for at least one IWORD.
At least one of CWORD[QOUT,POUT] must be set. */
uint64_t pout : 1; /**< Indicates whether the P pipe is used by this instruction.
If CWORD[POUT] is set, IWORD[PEN] must be set for at least one IWORD.
At least one of CWORD[QOUT,POUT] must be set. */
uint64_t iword : 6; /**< Indicates the number of input buffers used.
1 <= CWORD[IWORD] <= 32. */
uint64_t size : 24; /**< Indicates the size in bytes of all input buffers. When CWORD[Q_CMP,P_CMP]=0,
also indicates the size of the Q/P output buffers.
CWORD[SIZE] must be a multiple of 8B (i.e. <2:0> must be zero). */
} cword;
struct
{
uint64_t reserved_58_63 : 6; /**< Must be zero */
uint64_t fw : 1; /**< When set, indicates that RAD can modify any byte in any (128B) cache line touched
by L2/DRAM addresses OWORD[PTR] through OWORD[PTR]+CWORD[SIZE]1.
Setting OWORD[FW] can improve hardware performance, as some DRAM loads can
be avoided on L2 cache misses. The Q OWORD[FW] must not be set when
CWORD[Q_CMP] is set, and the P OWORD[FW] must not be set when
CWORD[P_CMP] is set. */
uint64_t nc : 1; /**< When set, indicates that RAD should not allocate L2 cache space for the P/Q data on
L2 cache misses.
OWORD[NC] should typically be clear, though setting OWORD[NC] can improve
performance in some circumstances, as the L2 cache will not be polluted by P/Q data.
The Q OWORD[NC] must not be set when CWORD[Q_CMP] is set, and the P
OWORD[NC] must not be set when CWORD[P_CMP] is set. */
uint64_t reserved_40_55 : 16; /**< Must be zero */
uint64_t addr : 40; /**< When CWORD[P_CMP,Q_CMP]=0, OWORD[PTR] indicates the starting address of
the L2/DRAM buffer that will receive the P/Q data. In the non-compare mode, the
output buffer receives all of the output buffer bytes.
When CWORD[P_CMP,Q_CMP]=1, the corresponding P/Q pipe is in compare mode,
and the only output of the pipe is the non-zero detect result. In this case,
OWORD[PTR] indicates the 8-byte location of the non-zero detect result. */
} oword;
struct
{
uint64_t reserved_57_63 : 7; /**< Must be zero */
uint64_t nc : 1; /**< When set, indicates that RAD should not allocate L2 cache space for this input buffer
data on L2 cache misses.
Setting IWORD[NC] may improve performance in some circumstances, as the L2
cache may not be polluted with input buffer data. */
uint64_t reserved_50_55 : 6; /**< Must be zero */
uint64_t qen : 1; /**< Indicates that this input buffer data should participate in the Q pipe result.
The Q pipe hardware multiplies each participating input byte by IWORD[QMULT]
before accumulating them by exclusive-OR'ing.
IWORD[QEN] must not be set when CWORD[QOUT] is not set.
If CWORD[QOUT] is set, IWORD[QEN] must be set for at least one IWORD. */
uint64_t pen : 1; /**< Indicates that this input buffer data should participate in the P pipe result.
The P pipe hardware accumulates each participating input byte by bit-wise
exclusive-OR'ing it.
IWORD[PEN] must not be set when CWORD[POUT] is not set.
If CWORD[POUT] is set, IWORD[PEN] must be set for at least one IWORD. */
uint64_t qmult : 8; /**< The Q pipe multiplier for the input buffer. Section 26.1 above describes the GF(28)
multiplication algorithm.
IWORD[QMULT] must be zero when IWORD[QEN] is not set.
IWORD[QMULT] must not be zero when IWORD[QEN] is set.
When IWORD[QMULT] is 1, the multiplication simplifies to the identity function,
and the Q pipe performs the same XOR function as the P pipe. */
uint64_t addr : 40; /**< The starting address of the input buffer in L2/DRAM.
IWORD[PTR] must be naturally-aligned on an 8 byte boundary (i.e. <2:0> must be
zero). */
} iword;
} cvmx_raid_word_t;
/**
* Initialize the RAID block
*
* @param polynomial Coefficients for the RAID polynomial
*
* @return Zero on success, negative on failure
*/
int cvmx_raid_initialize(cvmx_rad_reg_polynomial_t polynomial);
/**
* Shutdown the RAID block. RAID must be idle when
* this function is called.
*
* @return Zero on success, negative on failure
*/
int cvmx_raid_shutdown(void);
/**
* Submit a command to the RAID block
*
* @param num_words Number of command words to submit
* @param words Command words
*
* @return Zero on success, negative on failure
*/
int cvmx_raid_submit(int num_words, cvmx_raid_word_t words[]);
#ifdef __cplusplus
}
#endif
#endif // __CVMX_CMD_QUEUE_H__