| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/umodem/@/mips/cavium/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/umodem/@/mips/cavium/cvmx_config.h |
/***********************license start***************
* Copyright (c) 2003-2008 Cavium Networks (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* * Neither the name of Cavium Networks nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
*
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS
* OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH
* RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET
* POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT
* OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
*
*
* For any questions regarding licensing please contact marketing@caviumnetworks.com
*
***********************license end**************************************/
/* $FreeBSD: release/9.1.0/sys/mips/cavium/cvmx_config.h 217214 2011-01-10 03:48:41Z jmallett $ */
#ifndef _CVMX_CONFIG_H
#define _CVMX_CONFIG_H
#include "opt_cvmx.h"
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/pmap.h>
#include <machine/stdarg.h>
#define asm __asm
#define CVMX_DONT_INCLUDE_CONFIG
/* Define to enable the use of simple executive packet output functions.
** For packet I/O setup enable the helper functions below.
*/
#define CVMX_ENABLE_PKO_FUNCTIONS
/* Define to enable the use of simple executive helper functions. These
** include many harware setup functions. See cvmx-helper.[ch] for
** details.
*/
#define CVMX_ENABLE_HELPER_FUNCTIONS
/* CVMX_HELPER_FIRST_MBUFF_SKIP is the number of bytes to reserve before
** the beginning of the packet. If necessary, override the default
** here. See the IPD section of the hardware manual for MBUFF SKIP
** details.*/
#define CVMX_HELPER_FIRST_MBUFF_SKIP 184
/* CVMX_HELPER_NOT_FIRST_MBUFF_SKIP is the number of bytes to reserve in each
** chained packet element. If necessary, override the default here */
#define CVMX_HELPER_NOT_FIRST_MBUFF_SKIP 0
/* CVMX_HELPER_ENABLE_BACK_PRESSURE controls whether back pressure is enabled
** for all input ports. This controls if IPD sends backpressure to all ports if
** Octeon's FPA pools don't have enough packet or work queue entries. Even when
** this is off, it is still possible to get backpressure from individual
** hardware ports. When configuring backpressure, also check
** CVMX_HELPER_DISABLE_*_BACKPRESSURE below. If necessary, override the default
** here */
#define CVMX_HELPER_ENABLE_BACK_PRESSURE 1
/* CVMX_HELPER_ENABLE_IPD controls if the IPD is enabled in the helper
** function. Once it is enabled the hardware starts accepting packets. You
** might want to skip the IPD enable if configuration changes are need
** from the default helper setup. If necessary, override the default here */
#define CVMX_HELPER_ENABLE_IPD 1
/* CVMX_HELPER_INPUT_TAG_TYPE selects the type of tag that the IPD assigns
** to incoming packets. */
#define CVMX_HELPER_INPUT_TAG_TYPE CVMX_POW_TAG_TYPE_ORDERED
/* The following select which fields are used by the PIP to generate
** the tag on INPUT
** 0: don't include
** 1: include */
#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP 0
#define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP 0
#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT 0
#define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT 0
#define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER 0
#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP 0
#define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP 0
#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT 0
#define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT 0
#define CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL 0
#define CVMX_HELPER_INPUT_TAG_INPUT_PORT 1
/* Select skip mode for input ports */
#define CVMX_HELPER_INPUT_PORT_SKIP_MODE CVMX_PIP_PORT_CFG_MODE_SKIPL2
/* Define the number of queues per output port */
#define CVMX_HELPER_PKO_QUEUES_PER_PORT_INTERFACE0 1
#define CVMX_HELPER_PKO_QUEUES_PER_PORT_INTERFACE1 1
/* Configure PKO to use per-core queues (PKO lockless operation).
** Please see the related SDK documentation for PKO that illustrates
** how to enable and configure this option. */
//#define CVMX_ENABLE_PKO_LOCKLESS_OPERATION 1
//#define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 8
//#define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 8
/* Force backpressure to be disabled. This overrides all other
** backpressure configuration */
#define CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE 1
/* Disable the SPI4000's processing of backpressure packets and backpressure
** generation. When this is 1, the SPI4000 will not stop sending packets when
** receiving backpressure. It will also not generate backpressure packets when
** its internal FIFOs are full. */
#define CVMX_HELPER_DISABLE_SPI4000_BACKPRESSURE 1
/* CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI initialization
** routines wait for SPI training. You can override the value using
** executive-config.h if necessary */
#define CVMX_HELPER_SPI_TIMEOUT 10
/* Select the number of low latency memory ports (interfaces) that
** will be configured. Valid values are 1 and 2.
*/
#define CVMX_LLM_CONFIG_NUM_PORTS 2
/* Enable the fix for PKI-100 errata ("Size field is 8 too large in WQE and next
** pointers"). If CVMX_ENABLE_LEN_M8_FIX is set to 0, the fix for this errata will
** not be enabled.
** 0: Fix is not enabled
** 1: Fix is enabled, if supported by hardware
*/
#define CVMX_ENABLE_LEN_M8_FIX 1
#if defined(CVMX_ENABLE_HELPER_FUNCTIONS) && !defined(CVMX_ENABLE_PKO_FUNCTIONS)
#define CVMX_ENABLE_PKO_FUNCTIONS
#endif
/************************* Config Specific Defines ************************/
#define CVMX_LLM_NUM_PORTS 1
#define CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 1 /**< PKO queues per port for interface 0 (ports 0-15) */
#define CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 1 /**< PKO queues per port for interface 1 (ports 16-31) */
#define CVMX_PKO_MAX_PORTS_INTERFACE0 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 /**< Limit on the number of PKO ports enabled for interface 0 */
#define CVMX_PKO_MAX_PORTS_INTERFACE1 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 /**< Limit on the number of PKO ports enabled for interface 1 */
#define CVMX_PKO_QUEUES_PER_PORT_PCI 1 /**< PKO queues per port for PCI (ports 32-35) */
#define CVMX_PKO_QUEUES_PER_PORT_LOOP 1 /**< PKO queues per port for Loop devices (ports 36-39) */
/************************* FPA allocation *********************************/
/* Pool sizes in bytes, must be multiple of a cache line */
#define CVMX_FPA_POOL_0_SIZE (15 * CVMX_CACHE_LINE_SIZE)
#define CVMX_FPA_POOL_1_SIZE (1 * CVMX_CACHE_LINE_SIZE)
#define CVMX_FPA_POOL_2_SIZE (8 * CVMX_CACHE_LINE_SIZE)
#define CVMX_FPA_POOL_3_SIZE (0 * CVMX_CACHE_LINE_SIZE)
#define CVMX_FPA_POOL_4_SIZE (0 * CVMX_CACHE_LINE_SIZE)
#define CVMX_FPA_POOL_5_SIZE (0 * CVMX_CACHE_LINE_SIZE)
#define CVMX_FPA_POOL_6_SIZE (0 * CVMX_CACHE_LINE_SIZE)
#define CVMX_FPA_POOL_7_SIZE (0 * CVMX_CACHE_LINE_SIZE)
/* Pools in use */
#define CVMX_FPA_PACKET_POOL (0) /**< Packet buffers */
#define CVMX_FPA_PACKET_POOL_SIZE CVMX_FPA_POOL_0_SIZE
#define CVMX_FPA_WQE_POOL (1) /**< Work queue entrys */
#define CVMX_FPA_WQE_POOL_SIZE CVMX_FPA_POOL_1_SIZE
#define CVMX_FPA_OUTPUT_BUFFER_POOL (2) /**< PKO queue command buffers */
#define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE CVMX_FPA_POOL_2_SIZE
/************************* FAU allocation ********************************/
#define CVMX_FAU_REG_END 2048
#define CVMX_SCR_SCRATCH 0
#endif /* !_CVMX_CONFIG_H */