| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urio/@/amd64/compile/hs32/modules/usr/src/sys/modules/padlock/@/mips/mips/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urio/@/amd64/compile/hs32/modules/usr/src/sys/modules/padlock/@/mips/mips/vm_machdep.c |
/*-
* Copyright (c) 1982, 1986 The Regents of the University of California.
* Copyright (c) 1989, 1990 William Jolitz
* Copyright (c) 1994 John Dyson
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department, and William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)vm_machdep.c 7.3 (Berkeley) 5/13/91
* Utah $Hdr: vm_machdep.c 1.16.1.1 89/06/23$
* from: src/sys/i386/i386/vm_machdep.c,v 1.132.2.2 2000/08/26 04:19:26 yokota
* JNPR: vm_machdep.c,v 1.8.2.2 2007/08/16 15:59:17 girish
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/mips/mips/vm_machdep.c 217944 2011-01-27 14:49:22Z jchandra $");
#include "opt_cputype.h"
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <sys/syscall.h>
#include <sys/buf.h>
#include <sys/vnode.h>
#include <sys/vmmeter.h>
#include <sys/kernel.h>
#include <sys/sysctl.h>
#include <sys/unistd.h>
#include <machine/asm.h>
#include <machine/cache.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/md_var.h>
#include <machine/pcb.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <vm/pmap.h>
#include <vm/vm_kern.h>
#include <vm/vm_map.h>
#include <vm/vm_page.h>
#include <vm/vm_pageout.h>
#include <vm/vm_param.h>
#include <vm/uma.h>
#include <vm/uma_int.h>
#include <sys/user.h>
#include <sys/mbuf.h>
#include <sys/sf_buf.h>
#ifndef NSFBUFS
#define NSFBUFS (512 + maxusers * 16)
#endif
#ifndef __mips_n64
static void sf_buf_init(void *arg);
SYSINIT(sock_sf, SI_SUB_MBUF, SI_ORDER_ANY, sf_buf_init, NULL);
/*
* Expanded sf_freelist head. Really an SLIST_HEAD() in disguise, with the
* sf_freelist head with the sf_lock mutex.
*/
static struct {
SLIST_HEAD(, sf_buf) sf_head;
struct mtx sf_lock;
} sf_freelist;
static u_int sf_buf_alloc_want;
#endif
/*
* Finish a fork operation, with process p2 nearly set up.
* Copy and update the pcb, set up the stack so that the child
* ready to run and return to user mode.
*/
void
cpu_fork(register struct thread *td1,register struct proc *p2,
struct thread *td2,int flags)
{
register struct proc *p1;
struct pcb *pcb2;
p1 = td1->td_proc;
if ((flags & RFPROC) == 0)
return;
/* It is assumed that the vm_thread_alloc called
* cpu_thread_alloc() before cpu_fork is called.
*/
/* Point the pcb to the top of the stack */
pcb2 = td2->td_pcb;
/* Copy p1's pcb, note that in this case
* our pcb also includes the td_frame being copied
* too. The older mips2 code did an additional copy
* of the td_frame, for us that's not needed any
* longer (this copy does them both)
*/
bcopy(td1->td_pcb, pcb2, sizeof(*pcb2));
/* Point mdproc and then copy over td1's contents
* md_proc is empty for MIPS
*/
td2->td_md.md_flags = td1->td_md.md_flags & MDTD_FPUSED;
/*
* Set up return-value registers as fork() libc stub expects.
*/
td2->td_frame->v0 = 0;
td2->td_frame->v1 = 1;
td2->td_frame->a3 = 0;
if (td1 == PCPU_GET(fpcurthread))
MipsSaveCurFPState(td1);
pcb2->pcb_context[PCB_REG_RA] = (register_t)(intptr_t)fork_trampoline;
/* Make sp 64-bit aligned */
pcb2->pcb_context[PCB_REG_SP] = (register_t)(((vm_offset_t)td2->td_pcb &
~(sizeof(__int64_t) - 1)) - CALLFRAME_SIZ);
pcb2->pcb_context[PCB_REG_S0] = (register_t)(intptr_t)fork_return;
pcb2->pcb_context[PCB_REG_S1] = (register_t)(intptr_t)td2;
pcb2->pcb_context[PCB_REG_S2] = (register_t)(intptr_t)td2->td_frame;
pcb2->pcb_context[PCB_REG_SR] = mips_rd_status() &
(MIPS_SR_KX | MIPS_SR_UX | MIPS_SR_INT_MASK);
/*
* FREEBSD_DEVELOPERS_FIXME:
* Setup any other CPU-Specific registers (Not MIPS Standard)
* and/or bits in other standard MIPS registers (if CPU-Specific)
* that are needed.
*/
td2->td_md.md_tls = td1->td_md.md_tls;
td2->td_md.md_saved_intr = MIPS_SR_INT_IE;
td2->td_md.md_spinlock_count = 1;
#ifdef CPU_CNMIPS
pcb2->pcb_context[PCB_REG_SR] |= MIPS_SR_COP_2_BIT | MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX | MIPS_SR_SX;
#endif
}
/*
* Intercept the return address from a freshly forked process that has NOT
* been scheduled yet.
*
* This is needed to make kernel threads stay in kernel mode.
*/
void
cpu_set_fork_handler(struct thread *td, void (*func) __P((void *)), void *arg)
{
/*
* Note that the trap frame follows the args, so the function
* is really called like this: func(arg, frame);
*/
td->td_pcb->pcb_context[PCB_REG_S0] = (register_t)(intptr_t)func;
td->td_pcb->pcb_context[PCB_REG_S1] = (register_t)(intptr_t)arg;
}
void
cpu_exit(struct thread *td)
{
}
void
cpu_thread_exit(struct thread *td)
{
if (PCPU_GET(fpcurthread) == td)
PCPU_GET(fpcurthread) = (struct thread *)0;
}
void
cpu_thread_free(struct thread *td)
{
}
void
cpu_thread_clean(struct thread *td)
{
}
void
cpu_thread_swapin(struct thread *td)
{
pt_entry_t *pte;
int i;
/*
* The kstack may be at a different physical address now.
* Cache the PTEs for the Kernel stack in the machine dependent
* part of the thread struct so cpu_switch() can quickly map in
* the pcb struct and kernel stack.
*/
for (i = 0; i < KSTACK_PAGES; i++) {
pte = pmap_pte(kernel_pmap, td->td_kstack + i * PAGE_SIZE);
td->td_md.md_upte[i] = *pte & ~TLBLO_SWBITS_MASK;
}
}
void
cpu_thread_swapout(struct thread *td)
{
}
void
cpu_thread_alloc(struct thread *td)
{
pt_entry_t *pte;
int i;
KASSERT((td->td_kstack & (1 << PAGE_SHIFT)) == 0, ("kernel stack must be aligned."));
td->td_pcb = (struct pcb *)(td->td_kstack +
td->td_kstack_pages * PAGE_SIZE) - 1;
td->td_frame = &td->td_pcb->pcb_regs;
for (i = 0; i < KSTACK_PAGES; i++) {
pte = pmap_pte(kernel_pmap, td->td_kstack + i * PAGE_SIZE);
td->td_md.md_upte[i] = *pte & ~TLBLO_SWBITS_MASK;
}
}
void
cpu_set_syscall_retval(struct thread *td, int error)
{
struct trapframe *locr0 = td->td_frame;
unsigned int code;
int quad_syscall;
code = locr0->v0;
quad_syscall = 0;
#if defined(__mips_o32)
if (code == SYS___syscall)
quad_syscall = 1;
#endif
if (code == SYS_syscall)
code = locr0->a0;
else if (code == SYS___syscall) {
if (quad_syscall)
code = _QUAD_LOWWORD ? locr0->a1 : locr0->a0;
else
code = locr0->a0;
}
switch (error) {
case 0:
if (quad_syscall && code != SYS_lseek) {
/*
* System call invoked through the
* SYS___syscall interface but the
* return value is really just 32
* bits.
*/
locr0->v0 = td->td_retval[0];
if (_QUAD_LOWWORD)
locr0->v1 = td->td_retval[0];
locr0->a3 = 0;
} else {
locr0->v0 = td->td_retval[0];
locr0->v1 = td->td_retval[1];
locr0->a3 = 0;
}
break;
case ERESTART:
locr0->pc = td->td_pcb->pcb_tpc;
break;
case EJUSTRETURN:
break; /* nothing to do */
default:
if (quad_syscall && code != SYS_lseek) {
locr0->v0 = error;
if (_QUAD_LOWWORD)
locr0->v1 = error;
locr0->a3 = 1;
} else {
locr0->v0 = error;
locr0->a3 = 1;
}
}
}
/*
* Initialize machine state (pcb and trap frame) for a new thread about to
* upcall. Put enough state in the new thread's PCB to get it to go back
* userret(), where we can intercept it again to set the return (upcall)
* Address and stack, along with those from upcalls that are from other sources
* such as those generated in thread_userret() itself.
*/
void
cpu_set_upcall(struct thread *td, struct thread *td0)
{
struct pcb *pcb2;
/* Point the pcb to the top of the stack. */
pcb2 = td->td_pcb;
/*
* Copy the upcall pcb. This loads kernel regs.
* Those not loaded individually below get their default
* values here.
*
* XXXKSE It might be a good idea to simply skip this as
* the values of the other registers may be unimportant.
* This would remove any requirement for knowing the KSE
* at this time (see the matching comment below for
* more analysis) (need a good safe default).
* In MIPS, the trapframe is the first element of the PCB
* and gets copied when we copy the PCB. No separate copy
* is needed.
*/
bcopy(td0->td_pcb, pcb2, sizeof(*pcb2));
/*
* Set registers for trampoline to user mode.
*/
pcb2->pcb_context[PCB_REG_RA] = (register_t)(intptr_t)fork_trampoline;
/* Make sp 64-bit aligned */
pcb2->pcb_context[PCB_REG_SP] = (register_t)(((vm_offset_t)td->td_pcb &
~(sizeof(__int64_t) - 1)) - CALLFRAME_SIZ);
pcb2->pcb_context[PCB_REG_S0] = (register_t)(intptr_t)fork_return;
pcb2->pcb_context[PCB_REG_S1] = (register_t)(intptr_t)td;
pcb2->pcb_context[PCB_REG_S2] = (register_t)(intptr_t)td->td_frame;
/* Dont set IE bit in SR. sched lock release will take care of it */
pcb2->pcb_context[PCB_REG_SR] = mips_rd_status() &
(MIPS_SR_KX | MIPS_SR_UX | MIPS_SR_INT_MASK);
#ifdef CPU_CNMIPS
pcb2->pcb_context[PCB_REG_SR] |= MIPS_SR_COP_2_BIT | MIPS_SR_COP_0_BIT |
MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX | MIPS_SR_SX;
#endif
/*
* FREEBSD_DEVELOPERS_FIXME:
* Setup any other CPU-Specific registers (Not MIPS Standard)
* that are needed.
*/
/* SMP Setup to release sched_lock in fork_exit(). */
td->td_md.md_spinlock_count = 1;
td->td_md.md_saved_intr = MIPS_SR_INT_IE;
#if 0
/* Maybe we need to fix this? */
td->td_md.md_saved_sr = ( (MIPS_SR_COP_2_BIT | MIPS_SR_COP_0_BIT) |
(MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX | MIPS_SR_SX) |
(MIPS_SR_INT_IE | MIPS_HARD_INT_MASK));
#endif
}
/*
* Set that machine state for performing an upcall that has to
* be done in thread_userret() so that those upcalls generated
* in thread_userret() itself can be done as well.
*/
void
cpu_set_upcall_kse(struct thread *td, void (*entry)(void *), void *arg,
stack_t *stack)
{
struct trapframe *tf;
register_t sp;
/*
* At the point where a function is called, sp must be 8
* byte aligned[for compatibility with 64-bit CPUs]
* in ``See MIPS Run'' by D. Sweetman, p. 269
* align stack */
sp = ((register_t)(intptr_t)(stack->ss_sp + stack->ss_size) & ~0x7) -
CALLFRAME_SIZ;
/*
* Set the trap frame to point at the beginning of the uts
* function.
*/
tf = td->td_frame;
bzero(tf, sizeof(struct trapframe));
tf->sp = sp;
tf->pc = (register_t)(intptr_t)entry;
/*
* MIPS ABI requires T9 to be the same as PC
* in subroutine entry point
*/
tf->t9 = (register_t)(intptr_t)entry;
tf->a0 = (register_t)(intptr_t)arg;
/*
* Keep interrupt mask
*/
td->td_frame->sr = MIPS_SR_KSU_USER | MIPS_SR_EXL | MIPS_SR_INT_IE |
(mips_rd_status() & MIPS_SR_INT_MASK);
#if defined(__mips_n32)
td->td_frame->sr |= MIPS_SR_PX;
#elif defined(__mips_n64)
td->td_frame->sr |= MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX;
#endif
#ifdef CPU_CNMIPS
tf->sr |= MIPS_SR_INT_IE | MIPS_SR_COP_0_BIT | MIPS_SR_PX | MIPS_SR_UX |
MIPS_SR_KX;
#endif
/* tf->sr |= (ALL_INT_MASK & idle_mask) | SR_INT_ENAB; */
/**XXX the above may now be wrong -- mips2 implements this as panic */
/*
* FREEBSD_DEVELOPERS_FIXME:
* Setup any other CPU-Specific registers (Not MIPS Standard)
* that are needed.
*/
}
/*
* Convert kernel VA to physical address
*/
u_long
kvtop(void *addr)
{
vm_offset_t va;
va = pmap_kextract((vm_offset_t)addr);
if (va == 0)
panic("kvtop: zero page frame");
return((intptr_t)va);
}
/*
* Implement the pre-zeroed page mechanism.
* This routine is called from the idle loop.
*/
#define ZIDLE_LO(v) ((v) * 2 / 3)
#define ZIDLE_HI(v) ((v) * 4 / 5)
/*
* Allocate a pool of sf_bufs (sendfile(2) or "super-fast" if you prefer. :-))
*/
#ifndef __mips_n64
static void
sf_buf_init(void *arg)
{
struct sf_buf *sf_bufs;
vm_offset_t sf_base;
int i;
nsfbufs = NSFBUFS;
TUNABLE_INT_FETCH("kern.ipc.nsfbufs", &nsfbufs);
mtx_init(&sf_freelist.sf_lock, "sf_bufs list lock", NULL, MTX_DEF);
SLIST_INIT(&sf_freelist.sf_head);
sf_base = kmem_alloc_nofault(kernel_map, nsfbufs * PAGE_SIZE);
sf_bufs = malloc(nsfbufs * sizeof(struct sf_buf), M_TEMP,
M_NOWAIT | M_ZERO);
for (i = 0; i < nsfbufs; i++) {
sf_bufs[i].kva = sf_base + i * PAGE_SIZE;
SLIST_INSERT_HEAD(&sf_freelist.sf_head, &sf_bufs[i], free_list);
}
sf_buf_alloc_want = 0;
}
#endif
/*
* Get an sf_buf from the freelist. Will block if none are available.
*/
struct sf_buf *
sf_buf_alloc(struct vm_page *m, int flags)
{
#ifndef __mips_n64
struct sf_buf *sf;
int error;
mtx_lock(&sf_freelist.sf_lock);
while ((sf = SLIST_FIRST(&sf_freelist.sf_head)) == NULL) {
if (flags & SFB_NOWAIT)
break;
sf_buf_alloc_want++;
mbstat.sf_allocwait++;
error = msleep(&sf_freelist, &sf_freelist.sf_lock,
(flags & SFB_CATCH) ? PCATCH | PVM : PVM, "sfbufa", 0);
sf_buf_alloc_want--;
/*
* If we got a signal, don't risk going back to sleep.
*/
if (error)
break;
}
if (sf != NULL) {
SLIST_REMOVE_HEAD(&sf_freelist.sf_head, free_list);
sf->m = m;
nsfbufsused++;
nsfbufspeak = imax(nsfbufspeak, nsfbufsused);
pmap_qenter(sf->kva, &sf->m, 1);
}
mtx_unlock(&sf_freelist.sf_lock);
return (sf);
#else
return ((struct sf_buf *)m);
#endif
}
/*
* Release resources back to the system.
*/
void
sf_buf_free(struct sf_buf *sf)
{
#ifndef __mips_n64
pmap_qremove(sf->kva, 1);
mtx_lock(&sf_freelist.sf_lock);
SLIST_INSERT_HEAD(&sf_freelist.sf_head, sf, free_list);
nsfbufsused--;
if (sf_buf_alloc_want > 0)
wakeup(&sf_freelist);
mtx_unlock(&sf_freelist.sf_lock);
#endif
}
/*
* Software interrupt handler for queued VM system processing.
*/
void
swi_vm(void *dummy)
{
if (busdma_swi_pending)
busdma_swi();
}
int
cpu_set_user_tls(struct thread *td, void *tls_base)
{
td->td_md.md_tls = tls_base;
return (0);
}
#ifdef DDB
#include <ddb/ddb.h>
#define DB_PRINT_REG(ptr, regname) \
db_printf(" %-12s %p\n", #regname, (void *)(intptr_t)((ptr)->regname))
#define DB_PRINT_REG_ARRAY(ptr, arrname, regname) \
db_printf(" %-12s %p\n", #regname, (void *)(intptr_t)((ptr)->arrname[regname]))
static void
dump_trapframe(struct trapframe *trapframe)
{
db_printf("Trapframe at %p\n", trapframe);
DB_PRINT_REG(trapframe, zero);
DB_PRINT_REG(trapframe, ast);
DB_PRINT_REG(trapframe, v0);
DB_PRINT_REG(trapframe, v1);
DB_PRINT_REG(trapframe, a0);
DB_PRINT_REG(trapframe, a1);
DB_PRINT_REG(trapframe, a2);
DB_PRINT_REG(trapframe, a3);
DB_PRINT_REG(trapframe, t0);
DB_PRINT_REG(trapframe, t1);
DB_PRINT_REG(trapframe, t2);
DB_PRINT_REG(trapframe, t3);
DB_PRINT_REG(trapframe, t4);
DB_PRINT_REG(trapframe, t5);
DB_PRINT_REG(trapframe, t6);
DB_PRINT_REG(trapframe, t7);
DB_PRINT_REG(trapframe, s0);
DB_PRINT_REG(trapframe, s1);
DB_PRINT_REG(trapframe, s2);
DB_PRINT_REG(trapframe, s3);
DB_PRINT_REG(trapframe, s4);
DB_PRINT_REG(trapframe, s5);
DB_PRINT_REG(trapframe, s6);
DB_PRINT_REG(trapframe, s7);
DB_PRINT_REG(trapframe, t8);
DB_PRINT_REG(trapframe, t9);
DB_PRINT_REG(trapframe, k0);
DB_PRINT_REG(trapframe, k1);
DB_PRINT_REG(trapframe, gp);
DB_PRINT_REG(trapframe, sp);
DB_PRINT_REG(trapframe, s8);
DB_PRINT_REG(trapframe, ra);
DB_PRINT_REG(trapframe, sr);
DB_PRINT_REG(trapframe, mullo);
DB_PRINT_REG(trapframe, mulhi);
DB_PRINT_REG(trapframe, badvaddr);
DB_PRINT_REG(trapframe, cause);
DB_PRINT_REG(trapframe, pc);
}
DB_SHOW_COMMAND(pcb, ddb_dump_pcb)
{
struct thread *td;
struct pcb *pcb;
struct trapframe *trapframe;
/* Determine which thread to examine. */
if (have_addr)
td = db_lookup_thread(addr, TRUE);
else
td = curthread;
pcb = td->td_pcb;
db_printf("Thread %d at %p\n", td->td_tid, td);
db_printf("PCB at %p\n", pcb);
trapframe = &pcb->pcb_regs;
dump_trapframe(trapframe);
db_printf("PCB Context:\n");
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S0);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S1);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S2);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S3);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S4);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S5);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S6);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S7);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_SP);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S8);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_RA);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_SR);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_GP);
DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_PC);
db_printf("PCB onfault = %p\n", pcb->pcb_onfault);
db_printf("md_saved_intr = 0x%0lx\n", (long)td->td_md.md_saved_intr);
db_printf("md_spinlock_count = %d\n", td->td_md.md_spinlock_count);
if (td->td_frame != trapframe) {
db_printf("td->td_frame %p is not the same as pcb_regs %p\n",
td->td_frame, trapframe);
}
}
/*
* Dump the trapframe beginning at address specified by first argument.
*/
DB_SHOW_COMMAND(trapframe, ddb_dump_trapframe)
{
if (!have_addr)
return;
dump_trapframe((struct trapframe *)addr);
}
#endif /* DDB */