config root man

Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urio/@/amd64/compile/hs32/modules/usr/src/sys/modules/padlock/@/x86/cpufreq/

FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64
Upload File :
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urio/@/amd64/compile/hs32/modules/usr/src/sys/modules/padlock/@/x86/cpufreq/est.c

/*-
 * Copyright (c) 2004 Colin Percival
 * Copyright (c) 2005 Nate Lawson
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted providing that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR``AS IS'' AND ANY EXPRESS OR 
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/x86/cpufreq/est.c 220433 2011-04-07 23:28:28Z jkim $");

#include <sys/param.h>
#include <sys/bus.h>
#include <sys/cpu.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/smp.h>
#include <sys/systm.h>

#include "cpufreq_if.h"
#include <machine/clock.h>
#include <machine/cputypes.h>
#include <machine/md_var.h>
#include <machine/specialreg.h>

#include <contrib/dev/acpica/include/acpi.h>

#include <dev/acpica/acpivar.h>
#include "acpi_if.h"

/* Status/control registers (from the IA-32 System Programming Guide). */
#define MSR_PERF_STATUS		0x198
#define MSR_PERF_CTL		0x199

/* Register and bit for enabling SpeedStep. */
#define MSR_MISC_ENABLE		0x1a0
#define MSR_SS_ENABLE		(1<<16)

/* Frequency and MSR control values. */
typedef struct {
	uint16_t	freq;
	uint16_t	volts;
	uint16_t	id16;
	int		power;
} freq_info;

/* Identifying characteristics of a processor and supported frequencies. */
typedef struct {
	const u_int	vendor_id;
	uint32_t	id32;
	freq_info	*freqtab;
} cpu_info;

struct est_softc {
	device_t	dev;
	int		acpi_settings;
	int		msr_settings;
	freq_info	*freq_list;
};

/* Convert MHz and mV into IDs for passing to the MSR. */
#define ID16(MHz, mV, bus_clk)				\
	(((MHz / bus_clk) << 8) | ((mV ? mV - 700 : 0) >> 4))
#define ID32(MHz_hi, mV_hi, MHz_lo, mV_lo, bus_clk)	\
	((ID16(MHz_lo, mV_lo, bus_clk) << 16) | (ID16(MHz_hi, mV_hi, bus_clk)))

/* Format for storing IDs in our table. */
#define FREQ_INFO_PWR(MHz, mV, bus_clk, mW)		\
	{ MHz, mV, ID16(MHz, mV, bus_clk), mW }
#define FREQ_INFO(MHz, mV, bus_clk)			\
	FREQ_INFO_PWR(MHz, mV, bus_clk, CPUFREQ_VAL_UNKNOWN)
#define INTEL(tab, zhi, vhi, zlo, vlo, bus_clk)		\
	{ CPU_VENDOR_INTEL, ID32(zhi, vhi, zlo, vlo, bus_clk), tab }
#define CENTAUR(tab, zhi, vhi, zlo, vlo, bus_clk)	\
	{ CPU_VENDOR_CENTAUR, ID32(zhi, vhi, zlo, vlo, bus_clk), tab }

static int msr_info_enabled = 0;
TUNABLE_INT("hw.est.msr_info", &msr_info_enabled);
static int strict = -1;
TUNABLE_INT("hw.est.strict", &strict);

/* Default bus clock value for Centrino processors. */
#define INTEL_BUS_CLK		100

/* XXX Update this if new CPUs have more settings. */
#define EST_MAX_SETTINGS	10
CTASSERT(EST_MAX_SETTINGS <= MAX_SETTINGS);

/* Estimate in microseconds of latency for performing a transition. */
#define EST_TRANS_LAT		1000

/*
 * Frequency (MHz) and voltage (mV) settings.
 *
 * Dothan processors have multiple VID#s with different settings for
 * each VID#.  Since we can't uniquely identify this info
 * without undisclosed methods from Intel, we can't support newer
 * processors with this table method.  If ACPI Px states are supported,
 * we get info from them.
 *
 * Data from the "Intel Pentium M Processor Datasheet",
 * Order Number 252612-003, Table 5.
 */
static freq_info PM17_130[] = {
	/* 130nm 1.70GHz Pentium M */
	FREQ_INFO(1700, 1484, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1308, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1004, INTEL_BUS_CLK),
	FREQ_INFO( 600,  956, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM16_130[] = {
	/* 130nm 1.60GHz Pentium M */
	FREQ_INFO(1600, 1484, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1420, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1164, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 600,  956, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM15_130[] = {
	/* 130nm 1.50GHz Pentium M */
	FREQ_INFO(1500, 1484, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1452, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1356, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1228, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 600,  956, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM14_130[] = {
	/* 130nm 1.40GHz Pentium M */
	FREQ_INFO(1400, 1484, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1436, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1308, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1180, INTEL_BUS_CLK),
	FREQ_INFO( 600,  956, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM13_130[] = {
	/* 130nm 1.30GHz Pentium M */
	FREQ_INFO(1300, 1388, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1356, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1292, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1260, INTEL_BUS_CLK),
	FREQ_INFO( 600,  956, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM13_LV_130[] = {
	/* 130nm 1.30GHz Low Voltage Pentium M */
	FREQ_INFO(1300, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1164, INTEL_BUS_CLK),
	FREQ_INFO(1100, 1100, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1020, INTEL_BUS_CLK),
	FREQ_INFO( 900, 1004, INTEL_BUS_CLK),
	FREQ_INFO( 800,  988, INTEL_BUS_CLK),
	FREQ_INFO( 600,  956, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM12_LV_130[] = {
	/* 130 nm 1.20GHz Low Voltage Pentium M */
	FREQ_INFO(1200, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1100, 1164, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1100, INTEL_BUS_CLK),
	FREQ_INFO( 900, 1020, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1004, INTEL_BUS_CLK),
	FREQ_INFO( 600,  956, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM11_LV_130[] = {
	/* 130 nm 1.10GHz Low Voltage Pentium M */
	FREQ_INFO(1100, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1164, INTEL_BUS_CLK),
	FREQ_INFO( 900, 1100, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1020, INTEL_BUS_CLK),
	FREQ_INFO( 600,  956, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM11_ULV_130[] = {
	/* 130 nm 1.10GHz Ultra Low Voltage Pentium M */
	FREQ_INFO(1100, 1004, INTEL_BUS_CLK),
	FREQ_INFO(1000,  988, INTEL_BUS_CLK),
	FREQ_INFO( 900,  972, INTEL_BUS_CLK),
	FREQ_INFO( 800,  956, INTEL_BUS_CLK),
	FREQ_INFO( 600,  844, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM10_ULV_130[] = {
	/* 130 nm 1.00GHz Ultra Low Voltage Pentium M */
	FREQ_INFO(1000, 1004, INTEL_BUS_CLK),
	FREQ_INFO( 900,  988, INTEL_BUS_CLK),
	FREQ_INFO( 800,  972, INTEL_BUS_CLK),
	FREQ_INFO( 600,  844, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};

/*
 * Data from "Intel Pentium M Processor on 90nm Process with
 * 2-MB L2 Cache Datasheet", Order Number 302189-008, Table 5.
 */
static freq_info PM_765A_90[] = {
	/* 90 nm 2.10GHz Pentium M, VID #A */
	FREQ_INFO(2100, 1340, INTEL_BUS_CLK),
	FREQ_INFO(1800, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1132, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1084, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_765B_90[] = {
	/* 90 nm 2.10GHz Pentium M, VID #B */
	FREQ_INFO(2100, 1324, INTEL_BUS_CLK),
	FREQ_INFO(1800, 1260, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1212, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1132, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1084, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_765C_90[] = {
	/* 90 nm 2.10GHz Pentium M, VID #C */
	FREQ_INFO(2100, 1308, INTEL_BUS_CLK),
	FREQ_INFO(1800, 1244, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1212, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1164, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1116, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1084, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_765E_90[] = {
	/* 90 nm 2.10GHz Pentium M, VID #E */
	FREQ_INFO(2100, 1356, INTEL_BUS_CLK),
	FREQ_INFO(1800, 1292, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1244, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1196, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1148, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1100, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_755A_90[] = {
	/* 90 nm 2.00GHz Pentium M, VID #A */
	FREQ_INFO(2000, 1340, INTEL_BUS_CLK),
	FREQ_INFO(1800, 1292, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1244, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1196, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1148, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1100, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_755B_90[] = {
	/* 90 nm 2.00GHz Pentium M, VID #B */
	FREQ_INFO(2000, 1324, INTEL_BUS_CLK),
	FREQ_INFO(1800, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1132, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1084, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_755C_90[] = {
	/* 90 nm 2.00GHz Pentium M, VID #C */
	FREQ_INFO(2000, 1308, INTEL_BUS_CLK),
	FREQ_INFO(1800, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1132, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1084, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_755D_90[] = {
	/* 90 nm 2.00GHz Pentium M, VID #D */
	FREQ_INFO(2000, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1800, 1244, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1196, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1164, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1116, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1084, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_745A_90[] = {
	/* 90 nm 1.80GHz Pentium M, VID #A */
	FREQ_INFO(1800, 1340, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1292, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1164, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_745B_90[] = {
	/* 90 nm 1.80GHz Pentium M, VID #B */
	FREQ_INFO(1800, 1324, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1212, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1164, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_745C_90[] = {
	/* 90 nm 1.80GHz Pentium M, VID #C */
	FREQ_INFO(1800, 1308, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1260, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1212, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1148, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1100, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_745D_90[] = {
	/* 90 nm 1.80GHz Pentium M, VID #D */
	FREQ_INFO(1800, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1600, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1132, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1084, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_735A_90[] = {
	/* 90 nm 1.70GHz Pentium M, VID #A */
	FREQ_INFO(1700, 1340, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1244, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_735B_90[] = {
	/* 90 nm 1.70GHz Pentium M, VID #B */
	FREQ_INFO(1700, 1324, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1244, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_735C_90[] = {
	/* 90 nm 1.70GHz Pentium M, VID #C */
	FREQ_INFO(1700, 1308, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1164, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_735D_90[] = {
	/* 90 nm 1.70GHz Pentium M, VID #D */
	FREQ_INFO(1700, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1212, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1148, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1100, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_725A_90[] = {
	/* 90 nm 1.60GHz Pentium M, VID #A */
	FREQ_INFO(1600, 1340, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1212, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1132, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1068, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_725B_90[] = {
	/* 90 nm 1.60GHz Pentium M, VID #B */
	FREQ_INFO(1600, 1324, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1260, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1196, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1132, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1068, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_725C_90[] = {
	/* 90 nm 1.60GHz Pentium M, VID #C */
	FREQ_INFO(1600, 1308, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1244, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_725D_90[] = {
	/* 90 nm 1.60GHz Pentium M, VID #D */
	FREQ_INFO(1600, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1164, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_715A_90[] = {
	/* 90 nm 1.50GHz Pentium M, VID #A */
	FREQ_INFO(1500, 1340, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1228, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1148, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1068, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_715B_90[] = {
	/* 90 nm 1.50GHz Pentium M, VID #B */
	FREQ_INFO(1500, 1324, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1212, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1148, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1068, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_715C_90[] = {
	/* 90 nm 1.50GHz Pentium M, VID #C */
	FREQ_INFO(1500, 1308, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1212, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1132, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1068, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_715D_90[] = {
	/* 90 nm 1.50GHz Pentium M, VID #D */
	FREQ_INFO(1500, 1276, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1180, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1116, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_778_90[] = {
	/* 90 nm 1.60GHz Low Voltage Pentium M */
	FREQ_INFO(1600, 1116, INTEL_BUS_CLK),
	FREQ_INFO(1500, 1116, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1100, INTEL_BUS_CLK),
	FREQ_INFO(1300, 1084, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1068, INTEL_BUS_CLK),
	FREQ_INFO(1100, 1052, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 900, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1020, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_758_90[] = {
	/* 90 nm 1.50GHz Low Voltage Pentium M */
	FREQ_INFO(1500, 1116, INTEL_BUS_CLK),
	FREQ_INFO(1400, 1116, INTEL_BUS_CLK),
	FREQ_INFO(1300, 1100, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1084, INTEL_BUS_CLK),
	FREQ_INFO(1100, 1068, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 900, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1020, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_738_90[] = {
	/* 90 nm 1.40GHz Low Voltage Pentium M */
	FREQ_INFO(1400, 1116, INTEL_BUS_CLK),
	FREQ_INFO(1300, 1116, INTEL_BUS_CLK),
	FREQ_INFO(1200, 1100, INTEL_BUS_CLK),
	FREQ_INFO(1100, 1068, INTEL_BUS_CLK),
	FREQ_INFO(1000, 1052, INTEL_BUS_CLK),
	FREQ_INFO( 900, 1036, INTEL_BUS_CLK),
	FREQ_INFO( 800, 1020, INTEL_BUS_CLK),
	FREQ_INFO( 600,  988, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_773G_90[] = {
	/* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #G */
	FREQ_INFO(1300,  956, INTEL_BUS_CLK),
	FREQ_INFO(1200,  940, INTEL_BUS_CLK),
	FREQ_INFO(1100,  924, INTEL_BUS_CLK),
	FREQ_INFO(1000,  908, INTEL_BUS_CLK),
	FREQ_INFO( 900,  876, INTEL_BUS_CLK),
	FREQ_INFO( 800,  860, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_773H_90[] = {
	/* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #H */
	FREQ_INFO(1300,  940, INTEL_BUS_CLK),
	FREQ_INFO(1200,  924, INTEL_BUS_CLK),
	FREQ_INFO(1100,  908, INTEL_BUS_CLK),
	FREQ_INFO(1000,  892, INTEL_BUS_CLK),
	FREQ_INFO( 900,  876, INTEL_BUS_CLK),
	FREQ_INFO( 800,  860, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_773I_90[] = {
	/* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #I */
	FREQ_INFO(1300,  924, INTEL_BUS_CLK),
	FREQ_INFO(1200,  908, INTEL_BUS_CLK),
	FREQ_INFO(1100,  892, INTEL_BUS_CLK),
	FREQ_INFO(1000,  876, INTEL_BUS_CLK),
	FREQ_INFO( 900,  860, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_773J_90[] = {
	/* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #J */
	FREQ_INFO(1300,  908, INTEL_BUS_CLK),
	FREQ_INFO(1200,  908, INTEL_BUS_CLK),
	FREQ_INFO(1100,  892, INTEL_BUS_CLK),
	FREQ_INFO(1000,  876, INTEL_BUS_CLK),
	FREQ_INFO( 900,  860, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_773K_90[] = {
	/* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #K */
	FREQ_INFO(1300,  892, INTEL_BUS_CLK),
	FREQ_INFO(1200,  892, INTEL_BUS_CLK),
	FREQ_INFO(1100,  876, INTEL_BUS_CLK),
	FREQ_INFO(1000,  860, INTEL_BUS_CLK),
	FREQ_INFO( 900,  860, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_773L_90[] = {
	/* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #L */
	FREQ_INFO(1300,  876, INTEL_BUS_CLK),
	FREQ_INFO(1200,  876, INTEL_BUS_CLK),
	FREQ_INFO(1100,  860, INTEL_BUS_CLK),
	FREQ_INFO(1000,  860, INTEL_BUS_CLK),
	FREQ_INFO( 900,  844, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_753G_90[] = {
	/* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #G */
	FREQ_INFO(1200,  956, INTEL_BUS_CLK),
	FREQ_INFO(1100,  940, INTEL_BUS_CLK),
	FREQ_INFO(1000,  908, INTEL_BUS_CLK),
	FREQ_INFO( 900,  892, INTEL_BUS_CLK),
	FREQ_INFO( 800,  860, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_753H_90[] = {
	/* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #H */
	FREQ_INFO(1200,  940, INTEL_BUS_CLK),
	FREQ_INFO(1100,  924, INTEL_BUS_CLK),
	FREQ_INFO(1000,  908, INTEL_BUS_CLK),
	FREQ_INFO( 900,  876, INTEL_BUS_CLK),
	FREQ_INFO( 800,  860, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_753I_90[] = {
	/* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #I */
	FREQ_INFO(1200,  924, INTEL_BUS_CLK),
	FREQ_INFO(1100,  908, INTEL_BUS_CLK),
	FREQ_INFO(1000,  892, INTEL_BUS_CLK),
	FREQ_INFO( 900,  876, INTEL_BUS_CLK),
	FREQ_INFO( 800,  860, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_753J_90[] = {
	/* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #J */
	FREQ_INFO(1200,  908, INTEL_BUS_CLK),
	FREQ_INFO(1100,  892, INTEL_BUS_CLK),
	FREQ_INFO(1000,  876, INTEL_BUS_CLK),
	FREQ_INFO( 900,  860, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_753K_90[] = {
	/* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #K */
	FREQ_INFO(1200,  892, INTEL_BUS_CLK),
	FREQ_INFO(1100,  892, INTEL_BUS_CLK),
	FREQ_INFO(1000,  876, INTEL_BUS_CLK),
	FREQ_INFO( 900,  860, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_753L_90[] = {
	/* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #L */
	FREQ_INFO(1200,  876, INTEL_BUS_CLK),
	FREQ_INFO(1100,  876, INTEL_BUS_CLK),
	FREQ_INFO(1000,  860, INTEL_BUS_CLK),
	FREQ_INFO( 900,  844, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};

static freq_info PM_733JG_90[] = {
	/* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #G */
	FREQ_INFO(1100,  956, INTEL_BUS_CLK),
	FREQ_INFO(1000,  940, INTEL_BUS_CLK),
	FREQ_INFO( 900,  908, INTEL_BUS_CLK),
	FREQ_INFO( 800,  876, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_733JH_90[] = {
	/* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #H */
	FREQ_INFO(1100,  940, INTEL_BUS_CLK),
	FREQ_INFO(1000,  924, INTEL_BUS_CLK),
	FREQ_INFO( 900,  892, INTEL_BUS_CLK),
	FREQ_INFO( 800,  876, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_733JI_90[] = {
	/* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #I */
	FREQ_INFO(1100,  924, INTEL_BUS_CLK),
	FREQ_INFO(1000,  908, INTEL_BUS_CLK),
	FREQ_INFO( 900,  892, INTEL_BUS_CLK),
	FREQ_INFO( 800,  860, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_733JJ_90[] = {
	/* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #J */
	FREQ_INFO(1100,  908, INTEL_BUS_CLK),
	FREQ_INFO(1000,  892, INTEL_BUS_CLK),
	FREQ_INFO( 900,  876, INTEL_BUS_CLK),
	FREQ_INFO( 800,  860, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_733JK_90[] = {
	/* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #K */
	FREQ_INFO(1100,  892, INTEL_BUS_CLK),
	FREQ_INFO(1000,  876, INTEL_BUS_CLK),
	FREQ_INFO( 900,  860, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_733JL_90[] = {
	/* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #L */
	FREQ_INFO(1100,  876, INTEL_BUS_CLK),
	FREQ_INFO(1000,  876, INTEL_BUS_CLK),
	FREQ_INFO( 900,  860, INTEL_BUS_CLK),
	FREQ_INFO( 800,  844, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
};
static freq_info PM_733_90[] = {
	/* 90 nm 1.10GHz Ultra Low Voltage Pentium M */
	FREQ_INFO(1100,  940, INTEL_BUS_CLK),
	FREQ_INFO(1000,  924, INTEL_BUS_CLK),
	FREQ_INFO( 900,  892, INTEL_BUS_CLK),
	FREQ_INFO( 800,  876, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};
static freq_info PM_723_90[] = {
	/* 90 nm 1.00GHz Ultra Low Voltage Pentium M */
	FREQ_INFO(1000,  940, INTEL_BUS_CLK),
	FREQ_INFO( 900,  908, INTEL_BUS_CLK),
	FREQ_INFO( 800,  876, INTEL_BUS_CLK),
	FREQ_INFO( 600,  812, INTEL_BUS_CLK),
	FREQ_INFO(   0,    0, 1),
};

/*
 * VIA C7-M 500 MHz FSB, 400 MHz FSB, and ULV variants.
 * Data from the "VIA C7-M Processor BIOS Writer's Guide (v2.17)" datasheet.
 */
static freq_info C7M_795[] = {
	/* 2.00GHz Centaur C7-M 533 Mhz FSB */
	FREQ_INFO_PWR(2000, 1148, 133, 20000),
	FREQ_INFO_PWR(1867, 1132, 133, 18000),
	FREQ_INFO_PWR(1600, 1100, 133, 15000),
	FREQ_INFO_PWR(1467, 1052, 133, 13000),
	FREQ_INFO_PWR(1200, 1004, 133, 10000),
	FREQ_INFO_PWR( 800,  844, 133,  7000),
	FREQ_INFO_PWR( 667,  844, 133,  6000),
	FREQ_INFO_PWR( 533,  844, 133,  5000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_785[] = {
	/* 1.80GHz Centaur C7-M 533 Mhz FSB */
	FREQ_INFO_PWR(1867, 1148, 133, 18000),
	FREQ_INFO_PWR(1600, 1100, 133, 15000),
	FREQ_INFO_PWR(1467, 1052, 133, 13000),
	FREQ_INFO_PWR(1200, 1004, 133, 10000),
	FREQ_INFO_PWR( 800,  844, 133,  7000),
	FREQ_INFO_PWR( 667,  844, 133,  6000),
	FREQ_INFO_PWR( 533,  844, 133,  5000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_765[] = {
	/* 1.60GHz Centaur C7-M 533 Mhz FSB */
	FREQ_INFO_PWR(1600, 1084, 133, 15000),
	FREQ_INFO_PWR(1467, 1052, 133, 13000),
	FREQ_INFO_PWR(1200, 1004, 133, 10000),
	FREQ_INFO_PWR( 800,  844, 133,  7000),
	FREQ_INFO_PWR( 667,  844, 133,  6000),
	FREQ_INFO_PWR( 533,  844, 133,  5000),
	FREQ_INFO(0, 0, 1),
};

static freq_info C7M_794[] = {
	/* 2.00GHz Centaur C7-M 400 Mhz FSB */
	FREQ_INFO_PWR(2000, 1148, 100, 20000),
	FREQ_INFO_PWR(1800, 1132, 100, 18000),
	FREQ_INFO_PWR(1600, 1100, 100, 15000),
	FREQ_INFO_PWR(1400, 1052, 100, 13000),
	FREQ_INFO_PWR(1000, 1004, 100, 10000),
	FREQ_INFO_PWR( 800,  844, 100,  7000),
	FREQ_INFO_PWR( 600,  844, 100,  6000),
	FREQ_INFO_PWR( 400,  844, 100,  5000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_784[] = {
	/* 1.80GHz Centaur C7-M 400 Mhz FSB */
	FREQ_INFO_PWR(1800, 1148, 100, 18000),
	FREQ_INFO_PWR(1600, 1100, 100, 15000),
	FREQ_INFO_PWR(1400, 1052, 100, 13000),
	FREQ_INFO_PWR(1000, 1004, 100, 10000),
	FREQ_INFO_PWR( 800,  844, 100,  7000),
	FREQ_INFO_PWR( 600,  844, 100,  6000),
	FREQ_INFO_PWR( 400,  844, 100,  5000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_764[] = {
	/* 1.60GHz Centaur C7-M 400 Mhz FSB */
	FREQ_INFO_PWR(1600, 1084, 100, 15000),
	FREQ_INFO_PWR(1400, 1052, 100, 13000),
	FREQ_INFO_PWR(1000, 1004, 100, 10000),
	FREQ_INFO_PWR( 800,  844, 100,  7000),
	FREQ_INFO_PWR( 600,  844, 100,  6000),
	FREQ_INFO_PWR( 400,  844, 100,  5000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_754[] = {
	/* 1.50GHz Centaur C7-M 400 Mhz FSB */
	FREQ_INFO_PWR(1500, 1004, 100, 12000),
	FREQ_INFO_PWR(1400,  988, 100, 11000),
	FREQ_INFO_PWR(1000,  940, 100,  9000),
	FREQ_INFO_PWR( 800,  844, 100,  7000),
	FREQ_INFO_PWR( 600,  844, 100,  6000),
	FREQ_INFO_PWR( 400,  844, 100,  5000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_771[] = {
	/* 1.20GHz Centaur C7-M 400 Mhz FSB */
	FREQ_INFO_PWR(1200,  860, 100,  7000),
	FREQ_INFO_PWR(1000,  860, 100,  6000),
	FREQ_INFO_PWR( 800,  844, 100,  5500),
	FREQ_INFO_PWR( 600,  844, 100,  5000),
	FREQ_INFO_PWR( 400,  844, 100,  4000),
	FREQ_INFO(0, 0, 1),
};

static freq_info C7M_775_ULV[] = {
	/* 1.50GHz Centaur C7-M ULV */
	FREQ_INFO_PWR(1500,  956, 100,  7500),
	FREQ_INFO_PWR(1400,  940, 100,  6000),
	FREQ_INFO_PWR(1000,  860, 100,  5000),
	FREQ_INFO_PWR( 800,  828, 100,  2800),
	FREQ_INFO_PWR( 600,  796, 100,  2500),
	FREQ_INFO_PWR( 400,  796, 100,  2000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_772_ULV[] = {
	/* 1.20GHz Centaur C7-M ULV */
	FREQ_INFO_PWR(1200,  844, 100,  5000),
	FREQ_INFO_PWR(1000,  844, 100,  4000),
	FREQ_INFO_PWR( 800,  828, 100,  2800),
	FREQ_INFO_PWR( 600,  796, 100,  2500),
	FREQ_INFO_PWR( 400,  796, 100,  2000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_779_ULV[] = {
	/* 1.00GHz Centaur C7-M ULV */
	FREQ_INFO_PWR(1000,  796, 100,  3500),
	FREQ_INFO_PWR( 800,  796, 100,  2800),
	FREQ_INFO_PWR( 600,  796, 100,  2500),
	FREQ_INFO_PWR( 400,  796, 100,  2000),
	FREQ_INFO(0, 0, 1),
};
static freq_info C7M_770_ULV[] = {
	/* 1.00GHz Centaur C7-M ULV */
	FREQ_INFO_PWR(1000,  844, 100,  5000),
	FREQ_INFO_PWR( 800,  796, 100,  2800),
	FREQ_INFO_PWR( 600,  796, 100,  2500),
	FREQ_INFO_PWR( 400,  796, 100,  2000),
	FREQ_INFO(0, 0, 1),
};

static cpu_info ESTprocs[] = {
	INTEL(PM17_130,		1700, 1484, 600, 956, INTEL_BUS_CLK),
	INTEL(PM16_130,		1600, 1484, 600, 956, INTEL_BUS_CLK),
	INTEL(PM15_130,		1500, 1484, 600, 956, INTEL_BUS_CLK),
	INTEL(PM14_130,		1400, 1484, 600, 956, INTEL_BUS_CLK),
	INTEL(PM13_130,		1300, 1388, 600, 956, INTEL_BUS_CLK),
	INTEL(PM13_LV_130,	1300, 1180, 600, 956, INTEL_BUS_CLK),
	INTEL(PM12_LV_130,	1200, 1180, 600, 956, INTEL_BUS_CLK),
	INTEL(PM11_LV_130,	1100, 1180, 600, 956, INTEL_BUS_CLK),
	INTEL(PM11_ULV_130,	1100, 1004, 600, 844, INTEL_BUS_CLK),
	INTEL(PM10_ULV_130,	1000, 1004, 600, 844, INTEL_BUS_CLK),
	INTEL(PM_765A_90,	2100, 1340, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_765B_90,	2100, 1324, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_765C_90,	2100, 1308, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_765E_90,	2100, 1356, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_755A_90,	2000, 1340, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_755B_90,	2000, 1324, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_755C_90,	2000, 1308, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_755D_90,	2000, 1276, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_745A_90,	1800, 1340, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_745B_90,	1800, 1324, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_745C_90,	1800, 1308, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_745D_90,	1800, 1276, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_735A_90,	1700, 1340, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_735B_90,	1700, 1324, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_735C_90,	1700, 1308, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_735D_90,	1700, 1276, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_725A_90,	1600, 1340, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_725B_90,	1600, 1324, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_725C_90,	1600, 1308, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_725D_90,	1600, 1276, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_715A_90,	1500, 1340, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_715B_90,	1500, 1324, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_715C_90,	1500, 1308, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_715D_90,	1500, 1276, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_778_90,	1600, 1116, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_758_90,	1500, 1116, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_738_90,	1400, 1116, 600, 988, INTEL_BUS_CLK),
	INTEL(PM_773G_90,	1300,  956, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_773H_90,	1300,  940, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_773I_90,	1300,  924, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_773J_90,	1300,  908, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_773K_90,	1300,  892, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_773L_90,	1300,  876, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_753G_90,	1200,  956, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_753H_90,	1200,  940, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_753I_90,	1200,  924, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_753J_90,	1200,  908, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_753K_90,	1200,  892, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_753L_90,	1200,  876, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_733JG_90,	1100,  956, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_733JH_90,	1100,  940, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_733JI_90,	1100,  924, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_733JJ_90,	1100,  908, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_733JK_90,	1100,  892, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_733JL_90,	1100,  876, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_733_90,	1100,  940, 600, 812, INTEL_BUS_CLK),
	INTEL(PM_723_90,	1000,  940, 600, 812, INTEL_BUS_CLK),

	CENTAUR(C7M_795,	2000, 1148, 533, 844, 133),
	CENTAUR(C7M_794,	2000, 1148, 400, 844, 100),
	CENTAUR(C7M_785,	1867, 1148, 533, 844, 133),
	CENTAUR(C7M_784,	1800, 1148, 400, 844, 100),
	CENTAUR(C7M_765,	1600, 1084, 533, 844, 133),
	CENTAUR(C7M_764,	1600, 1084, 400, 844, 100),
	CENTAUR(C7M_754,	1500, 1004, 400, 844, 100),
	CENTAUR(C7M_775_ULV,	1500,  956, 400, 796, 100),
	CENTAUR(C7M_771,	1200,  860, 400, 844, 100),
	CENTAUR(C7M_772_ULV,	1200,  844, 400, 796, 100),
	CENTAUR(C7M_779_ULV,	1000,  796, 400, 796, 100),
	CENTAUR(C7M_770_ULV,	1000,  844, 400, 796, 100),
	{ 0, 0, NULL },
};

static void	est_identify(driver_t *driver, device_t parent);
static int	est_features(driver_t *driver, u_int *features);
static int	est_probe(device_t parent);
static int	est_attach(device_t parent);
static int	est_detach(device_t parent);
static int	est_get_info(device_t dev);
static int	est_acpi_info(device_t dev, freq_info **freqs);
static int	est_table_info(device_t dev, uint64_t msr, freq_info **freqs);
static int	est_msr_info(device_t dev, uint64_t msr, freq_info **freqs);
static freq_info *est_get_current(freq_info *freq_list);
static int	est_settings(device_t dev, struct cf_setting *sets, int *count);
static int	est_set(device_t dev, const struct cf_setting *set);
static int	est_get(device_t dev, struct cf_setting *set);
static int	est_type(device_t dev, int *type);
static int	est_set_id16(device_t dev, uint16_t id16, int need_check);
static void	est_get_id16(uint16_t *id16_p);

static device_method_t est_methods[] = {
	/* Device interface */
	DEVMETHOD(device_identify,	est_identify),
	DEVMETHOD(device_probe,		est_probe),
	DEVMETHOD(device_attach,	est_attach),
	DEVMETHOD(device_detach,	est_detach),

	/* cpufreq interface */
	DEVMETHOD(cpufreq_drv_set,	est_set),
	DEVMETHOD(cpufreq_drv_get,	est_get),
	DEVMETHOD(cpufreq_drv_type,	est_type),
	DEVMETHOD(cpufreq_drv_settings,	est_settings),

	/* ACPI interface */
	DEVMETHOD(acpi_get_features,	est_features),

	{0, 0}
};

static driver_t est_driver = {
	"est",
	est_methods,
	sizeof(struct est_softc),
};

static devclass_t est_devclass;
DRIVER_MODULE(est, cpu, est_driver, est_devclass, 0, 0);

static int
est_features(driver_t *driver, u_int *features)
{

	/*
	 * Notify the ACPI CPU that we support direct access to MSRs.
	 * XXX C1 "I/O then Halt" seems necessary for some broken BIOS.
	 */
	*features = ACPI_CAP_PERF_MSRS | ACPI_CAP_C1_IO_HALT;
	return (0);
}

static void
est_identify(driver_t *driver, device_t parent)
{
	device_t child;

	/* Make sure we're not being doubly invoked. */
	if (device_find_child(parent, "est", -1) != NULL)
		return;

	/* Check that CPUID is supported and the vendor is Intel.*/
	if (cpu_high == 0 || (cpu_vendor_id != CPU_VENDOR_INTEL &&
	    cpu_vendor_id != CPU_VENDOR_CENTAUR))
		return;

	/*
	 * Check if the CPU supports EST.
	 */
	if (!(cpu_feature2 & CPUID2_EST))
		return;

	/*
	 * We add a child for each CPU since settings must be performed
	 * on each CPU in the SMP case.
	 */
	child = BUS_ADD_CHILD(parent, 10, "est", -1);
	if (child == NULL)
		device_printf(parent, "add est child failed\n");
}

static int
est_probe(device_t dev)
{
	device_t perf_dev;
	uint64_t msr;
	int error, type;

	if (resource_disabled("est", 0))
		return (ENXIO);

	/*
	 * If the ACPI perf driver has attached and is not just offering
	 * info, let it manage things.
	 */
	perf_dev = device_find_child(device_get_parent(dev), "acpi_perf", -1);
	if (perf_dev && device_is_attached(perf_dev)) {
		error = CPUFREQ_DRV_TYPE(perf_dev, &type);
		if (error == 0 && (type & CPUFREQ_FLAG_INFO_ONLY) == 0)
			return (ENXIO);
	}

	/* Attempt to enable SpeedStep if not currently enabled. */
	msr = rdmsr(MSR_MISC_ENABLE);
	if ((msr & MSR_SS_ENABLE) == 0) {
		wrmsr(MSR_MISC_ENABLE, msr | MSR_SS_ENABLE);
		if (bootverbose)
			device_printf(dev, "enabling SpeedStep\n");

		/* Check if the enable failed. */
		msr = rdmsr(MSR_MISC_ENABLE);
		if ((msr & MSR_SS_ENABLE) == 0) {
			device_printf(dev, "failed to enable SpeedStep\n");
			return (ENXIO);
		}
	}

	device_set_desc(dev, "Enhanced SpeedStep Frequency Control");
	return (0);
}

static int
est_attach(device_t dev)
{
	struct est_softc *sc;

	sc = device_get_softc(dev);
	sc->dev = dev;

	/* On SMP system we can't guarantie independent freq setting. */
	if (strict == -1 && mp_ncpus > 1)
		strict = 0;
	/* Check CPU for supported settings. */
	if (est_get_info(dev))
		return (ENXIO);

	cpufreq_register(dev);
	return (0);
}

static int
est_detach(device_t dev)
{
	struct est_softc *sc;
	int error;

	error = cpufreq_unregister(dev);
	if (error)
		return (error);

	sc = device_get_softc(dev);
	if (sc->acpi_settings || sc->msr_settings)
		free(sc->freq_list, M_DEVBUF);
	return (0);
}

/*
 * Probe for supported CPU settings.  First, check our static table of
 * settings.  If no match, try using the ones offered by acpi_perf
 * (i.e., _PSS).  We use ACPI second because some systems (IBM R/T40
 * series) export both legacy SMM IO-based access and direct MSR access
 * but the direct access specifies invalid values for _PSS.
 */
static int
est_get_info(device_t dev)
{
	struct est_softc *sc;
	uint64_t msr;
	int error;

	sc = device_get_softc(dev);
	msr = rdmsr(MSR_PERF_STATUS);
	error = est_table_info(dev, msr, &sc->freq_list);
	if (error)
		error = est_acpi_info(dev, &sc->freq_list);
	if (error)
		error = est_msr_info(dev, msr, &sc->freq_list);

	if (error) {
		printf(
	"est: CPU supports Enhanced Speedstep, but is not recognized.\n"
	"est: cpu_vendor %s, msr %0jx\n", cpu_vendor, msr);
		return (ENXIO);
	}

	return (0);
}

static int
est_acpi_info(device_t dev, freq_info **freqs)
{
	struct est_softc *sc;
	struct cf_setting *sets;
	freq_info *table;
	device_t perf_dev;
	int count, error, i, j;
	uint16_t saved_id16;

	perf_dev = device_find_child(device_get_parent(dev), "acpi_perf", -1);
	if (perf_dev == NULL || !device_is_attached(perf_dev))
		return (ENXIO);

	/* Fetch settings from acpi_perf. */
	sc = device_get_softc(dev);
	table = NULL;
	sets = malloc(MAX_SETTINGS * sizeof(*sets), M_TEMP, M_NOWAIT);
	if (sets == NULL)
		return (ENOMEM);
	count = MAX_SETTINGS;
	error = CPUFREQ_DRV_SETTINGS(perf_dev, sets, &count);
	if (error)
		goto out;

	/* Parse settings into our local table format. */
	table = malloc((count + 1) * sizeof(freq_info), M_DEVBUF, M_NOWAIT);
	if (table == NULL) {
		error = ENOMEM;
		goto out;
	}
	est_get_id16(&saved_id16);
	for (i = 0, j = 0; i < count; i++) {
		/*
		 * Confirm id16 value is correct.
		 */
		if (sets[i].freq > 0) {
			error = est_set_id16(dev, sets[i].spec[0], strict);
			if (error != 0) {
				if (bootverbose)
					device_printf(dev, "Invalid freq %u, "
					    "ignored.\n", sets[i].freq);
				continue;
			}
			table[j].freq = sets[i].freq;
			table[j].volts = sets[i].volts;
			table[j].id16 = sets[i].spec[0];
			table[j].power = sets[i].power;
			++j;
		}
	}
	/* restore saved setting */
	est_set_id16(dev, saved_id16, 0);

	/* Mark end of table with a terminator. */
	bzero(&table[j], sizeof(freq_info));

	sc->acpi_settings = TRUE;
	*freqs = table;
	error = 0;

out:
	if (sets)
		free(sets, M_TEMP);
	if (error && table)
		free(table, M_DEVBUF);
	return (error);
}

static int
est_table_info(device_t dev, uint64_t msr, freq_info **freqs)
{
	cpu_info *p;
	uint32_t id;

	/* Find a table which matches (vendor, id32). */
	id = msr >> 32;
	for (p = ESTprocs; p->id32 != 0; p++) {
		if (p->vendor_id == cpu_vendor_id && p->id32 == id)
			break;
	}
	if (p->id32 == 0)
		return (EOPNOTSUPP);

	/* Make sure the current setpoint is valid. */
	if (est_get_current(p->freqtab) == NULL) {
		device_printf(dev, "current setting not found in table\n");
		return (EOPNOTSUPP);
	}

	*freqs = p->freqtab;
	return (0);
}

static int
bus_speed_ok(int bus)
{

	switch (bus) {
	case 100:
	case 133:
	case 333:
		return (1);
	default:
		return (0);
	}
}

/*
 * Flesh out a simple rate table containing the high and low frequencies
 * based on the current clock speed and the upper 32 bits of the MSR.
 */
static int
est_msr_info(device_t dev, uint64_t msr, freq_info **freqs)
{
	struct est_softc *sc;
	freq_info *fp;
	int bus, freq, volts;
	uint16_t id;

	if (!msr_info_enabled)
		return (EOPNOTSUPP);

	/* Figure out the bus clock. */
	freq = atomic_load_acq_64(&tsc_freq) / 1000000;
	id = msr >> 32;
	bus = freq / (id >> 8);
	device_printf(dev, "Guessed bus clock (high) of %d MHz\n", bus);
	if (!bus_speed_ok(bus)) {
		/* We may be running on the low frequency. */
		id = msr >> 48;
		bus = freq / (id >> 8);
		device_printf(dev, "Guessed bus clock (low) of %d MHz\n", bus);
		if (!bus_speed_ok(bus))
			return (EOPNOTSUPP);

		/* Calculate high frequency. */
		id = msr >> 32;
		freq = ((id >> 8) & 0xff) * bus;
	}

	/* Fill out a new freq table containing just the high and low freqs. */
	sc = device_get_softc(dev);
	fp = malloc(sizeof(freq_info) * 3, M_DEVBUF, M_WAITOK | M_ZERO);

	/* First, the high frequency. */
	volts = id & 0xff;
	if (volts != 0) {
		volts <<= 4;
		volts += 700;
	}
	fp[0].freq = freq;
	fp[0].volts = volts;
	fp[0].id16 = id;
	fp[0].power = CPUFREQ_VAL_UNKNOWN;
	device_printf(dev, "Guessed high setting of %d MHz @ %d Mv\n", freq,
	    volts);

	/* Second, the low frequency. */
	id = msr >> 48;
	freq = ((id >> 8) & 0xff) * bus;
	volts = id & 0xff;
	if (volts != 0) {
		volts <<= 4;
		volts += 700;
	}
	fp[1].freq = freq;
	fp[1].volts = volts;
	fp[1].id16 = id;
	fp[1].power = CPUFREQ_VAL_UNKNOWN;
	device_printf(dev, "Guessed low setting of %d MHz @ %d Mv\n", freq,
	    volts);

	/* Table is already terminated due to M_ZERO. */
	sc->msr_settings = TRUE;
	*freqs = fp;
	return (0);
}

static void
est_get_id16(uint16_t *id16_p)
{
	*id16_p = rdmsr(MSR_PERF_STATUS) & 0xffff;
}

static int
est_set_id16(device_t dev, uint16_t id16, int need_check)
{
	uint64_t msr;
	uint16_t new_id16;
	int ret = 0;

	/* Read the current register, mask out the old, set the new id. */
	msr = rdmsr(MSR_PERF_CTL);
	msr = (msr & ~0xffff) | id16;
	wrmsr(MSR_PERF_CTL, msr);

	/* Wait a short while for the new setting.  XXX Is this necessary? */
	DELAY(EST_TRANS_LAT);

	if  (need_check) {
		est_get_id16(&new_id16);
		if (new_id16 != id16) {
			if (bootverbose)
				device_printf(dev, "Invalid id16 (set, cur) "
				    "= (%u, %u)\n", id16, new_id16);
			ret = ENXIO;
		}
	}
	return (ret);
}

static freq_info *
est_get_current(freq_info *freq_list)
{
	freq_info *f;
	int i;
	uint16_t id16;

	/*
	 * Try a few times to get a valid value.  Sometimes, if the CPU
	 * is in the middle of an asynchronous transition (i.e., P4TCC),
	 * we get a temporary invalid result.
	 */
	for (i = 0; i < 5; i++) {
		est_get_id16(&id16);
		for (f = freq_list; f->id16 != 0; f++) {
			if (f->id16 == id16)
				return (f);
		}
		DELAY(100);
	}
	return (NULL);
}

static int
est_settings(device_t dev, struct cf_setting *sets, int *count)
{
	struct est_softc *sc;
	freq_info *f;
	int i;

	sc = device_get_softc(dev);
	if (*count < EST_MAX_SETTINGS)
		return (E2BIG);

	i = 0;
	for (f = sc->freq_list; f->freq != 0; f++, i++) {
		sets[i].freq = f->freq;
		sets[i].volts = f->volts;
		sets[i].power = f->power;
		sets[i].lat = EST_TRANS_LAT;
		sets[i].dev = dev;
	}
	*count = i;

	return (0);
}

static int
est_set(device_t dev, const struct cf_setting *set)
{
	struct est_softc *sc;
	freq_info *f;

	/* Find the setting matching the requested one. */
	sc = device_get_softc(dev);
	for (f = sc->freq_list; f->freq != 0; f++) {
		if (f->freq == set->freq)
			break;
	}
	if (f->freq == 0)
		return (EINVAL);

	/* Read the current register, mask out the old, set the new id. */
	est_set_id16(dev, f->id16, 0);

	return (0);
}

static int
est_get(device_t dev, struct cf_setting *set)
{
	struct est_softc *sc;
	freq_info *f;

	sc = device_get_softc(dev);
	f = est_get_current(sc->freq_list);
	if (f == NULL)
		return (ENXIO);

	set->freq = f->freq;
	set->volts = f->volts;
	set->power = f->power;
	set->lat = EST_TRANS_LAT;
	set->dev = dev;
	return (0);
}

static int
est_type(device_t dev, int *type)
{

	if (type == NULL)
		return (EINVAL);

	*type = CPUFREQ_TYPE_ABSOLUTE;
	return (0);
}

Man Man