| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urio/@/dev/vxge/include/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urio/@/dev/vxge/include/vxgehal-ll.h |
/*-
* Copyright(c) 2002-2011 Exar Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification are permitted provided the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the Exar Corporation nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*$FreeBSD: release/9.1.0/sys/dev/vxge/include/vxgehal-ll.h 229461 2012-01-04 03:37:41Z eadler $*/
#ifndef VXGE_HAL_LL_H
#define VXGE_HAL_LL_H
#include <dev/vxge/include/vxgehal-version.h>
#include <dev/vxge/include/vxge-defs.h>
#include <dev/vxge/include/vxge-os-pal.h>
#include "vxgehal-status.h"
#include <dev/vxge/include/vxgehal-types.h>
#include <dev/vxge/include/vxge-debug.h>
#include <dev/vxge/include/vxge-list.h>
#include <dev/vxge/include/vxge-queue.h>
#include <dev/vxge/include/vxgehal-config.h>
#include <dev/vxge/include/vxgehal-stats.h>
#include <dev/vxge/include/vxgehal-mgmt.h>
#include <dev/vxge/include/vxgehal-mgmtaux.h>
__EXTERN_BEGIN_DECLS
/*
* Driver
*/
/*
* enum vxge_hal_xpak_alarm_type_e - XPAK Alarm types
* @VXGE_HAL_XPAK_ALARM_EXCESS_TEMP: Excess temparature alarm
* @VXGE_HAL_XPAK_ALARM_EXCESS_BIAS_CURRENT: Excess bias current alarm
* @VXGE_HAL_XPAK_ALARM_EXCESS_LASER_OUTPUT: Excess laser output alarm
*
* XPAK alarm types
*/
typedef enum vxge_hal_xpak_alarm_type_e {
VXGE_HAL_XPAK_ALARM_EXCESS_TEMP = 1,
VXGE_HAL_XPAK_ALARM_EXCESS_BIAS_CURRENT = 2,
VXGE_HAL_XPAK_ALARM_EXCESS_LASER_OUTPUT = 3,
} vxge_hal_xpak_alarm_type_e;
/*
* function vxge_uld_sched_timer_cb_f - Per-device periodic timer
* callback.
* @devh: HAL device handle.
* @userdata: Per-device user data (a.k.a. context) specified via
* vxge_hal_device_initialize().
*
* Periodic or one-shot timer callback. If specified (that is, not NULL)
* HAL invokes this callback periodically. The call is performed in the
* interrupt context, or more exactly, in the context of HAL's ISR
* vxge_hal_device_continue_irq().
*
* See also: vxge_hal_device_initialize {}
*/
typedef void (*vxge_uld_sched_timer_cb_f) (
vxge_hal_device_h devh,
void *userdata);
/*
* function vxge_uld_link_up_f - Link-Up callback provided by upper-layer
* driver.
* @devh: HAL device handle.
* @userdata: Opaque context set by the ULD via
* vxge_hal_device_private_set()
* (typically - at HAL device iinitialization time).
*
* Link-up notification callback provided by the ULD.
* This is one of the per-driver callbacks, see vxge_hal_uld_cbs_t {}.
*
* See also: vxge_hal_uld_cbs_t {}, vxge_uld_link_down_f {},
* vxge_hal_driver_initialize(), vxge_hal_device_private_set().
*/
typedef void (*vxge_uld_link_up_f) (
vxge_hal_device_h devh,
void *userdata);
/*
* function vxge_uld_link_down_f - Link-Down callback provided by
* upper-layer driver.
* @devh: HAL device handle.
* @userdata: Opaque context set by the ULD via
* vxge_hal_device_private_set()
* (typically - at HAL device iinitialization time).
*
* Link-Down notification callback provided by the upper-layer driver.
* This is one of the per-driver callbacks, see vxge_hal_uld_cbs_t {}.
*
* See also: vxge_hal_uld_cbs_t {}, vxge_uld_link_up_f {},
* vxge_hal_driver_initialize(), vxge_hal_device_private_set().
*/
typedef void (*vxge_uld_link_down_f) (
vxge_hal_device_h devh,
void *userdata);
/*
* function vxge_uld_crit_err_f - Critical Error notification callback.
* @devh: HAL device handle.
* @userdata: Opaque context set by the ULD via
* vxge_hal_device_private_set()
* (typically - at HAL device iinitialization time).
* @type: Enumerated hw error, e.g.: double ECC.
* @serr_data: X3100 status.
* @ext_data: Extended data. The contents depends on the @type.
*
* Critical error notification callback provided by the upper-layer driver.
* This is one of the per-driver callbacks, see vxge_hal_uld_cbs_t {}.
*
* See also: vxge_hal_uld_cbs_t {}, vxge_hal_event_e {},
* vxge_hal_device_private_set(), vxge_hal_driver_initialize().
*/
typedef void (*vxge_uld_crit_err_f) (
vxge_hal_device_h devh,
void *userdata,
vxge_hal_event_e type,
u64 ext_data);
/*
* function vxge_uld_xpak_alarm_log_f - ULD "XPAK alarm log" callback.
* @devh: HAL device handle.
* @port: Port number
* @type: XPAK Alarm type
*
* Unless NULL is specified, HAL invokes the callback after checking XPAK
* counters
*/
typedef void (*vxge_uld_xpak_alarm_log_f) (
vxge_hal_device_h devh,
u32 port,
vxge_hal_xpak_alarm_type_e type);
/*
* struct vxge_hal_uld_cbs_t - Upper-layer driver "slow-path" callbacks.
* @link_up: See vxge_uld_link_up_f {}.
* @link_down: See vxge_uld_link_down_f {}.
* @crit_err: See vxge_uld_crit_err_f {}.
* @sched_timer: See vxge_uld_sched_timer_cb_f {}.
* @xpak_alarm_log:
*
* Upper layer driver slow-path (per-driver) callbacks.
* Implemented by ULD and provided to HAL via
* vxge_hal_driver_initialize().
* Note that these callbacks are not mandatory: HAL will not invoke
* a callback if NULL is specified.
*
* See also: vxge_hal_driver_initialize().
*/
typedef struct vxge_hal_uld_cbs_t {
vxge_uld_link_up_f link_up;
vxge_uld_link_down_f link_down;
vxge_uld_crit_err_f crit_err;
vxge_uld_sched_timer_cb_f sched_timer;
vxge_uld_xpak_alarm_log_f xpak_alarm_log;
} vxge_hal_uld_cbs_t;
/*
* vxge_hal_driver_initialize - Initialize HAL.
* @config: HAL configuration, see vxge_hal_driver_config_t {}.
* @uld_callbacks: Upper-layer driver callbacks, e.g. link-up.
*
* HAL initialization entry point. Not to confuse with device initialization
* (note that HAL "contains" zero or more X3100 devices).
*
* Returns: VXGE_HAL_OK - success;
* VXGE_HAL_ERR_BAD_DRIVER_CONFIG - Driver configuration params invalid.
*
*/
vxge_hal_status_e
vxge_hal_driver_initialize(
vxge_hal_driver_config_t *config,
vxge_hal_uld_cbs_t *uld_callbacks);
/*
* vxge_hal_driver_debug_set - Set the debug module, level and timestamp
* @level: Debug level as defined in enum vxge_debug_level_e
*
* This routine is used to dynamically change the debug output
*/
void
vxge_hal_driver_debug_set(
vxge_debug_level_e level);
/*
* vxge_hal_driver_debug_get - Get the debug level
*
* This routine returns the current debug level set
*/
u32
vxge_hal_driver_debug_get(void);
/*
* vxge_hal_driver_terminate - Terminate HAL.
*
* HAL termination entry point.
*/
void
vxge_hal_driver_terminate(void);
void *
vxge_hal_device_get_legacy_reg(pci_dev_h pdev, pci_reg_h regh, u8 *bar0);
/*
* RX Descriptor
*/
/*
* enum vxge_hal_rxd_state_e - Descriptor (RXD) state.
* @VXGE_HAL_RXD_STATE_NONE: Invalid state.
* @VXGE_HAL_RXD_STATE_AVAIL: Descriptor is available for reservation.
* @VXGE_HAL_RXD_STATE_POSTED: Descriptor is posted for processing by the
* device.
* @VXGE_HAL_RXD_STATE_FREED: Descriptor is free and can be reused for
* filling-in and posting later.
*
* X3100/HAL descriptor states.
*
*/
typedef enum vxge_hal_rxd_state_e {
VXGE_HAL_RXD_STATE_NONE = 0,
VXGE_HAL_RXD_STATE_AVAIL = 1,
VXGE_HAL_RXD_STATE_POSTED = 2,
VXGE_HAL_RXD_STATE_FREED = 3
} vxge_hal_rxd_state_e;
/*
* Ring
*/
/*
* struct vxge_hal_ring_rxd_info_t - Extended information associated with a
* completed ring descriptor.
* @syn_flag: SYN flag
* @is_icmp: Is ICMP
* @fast_path_eligible: Fast Path Eligible flag
* @l3_cksum_valid: in L3 checksum is valid
* @l3_cksum: Result of IP checksum check (by X3100 hardware).
* This field containing VXGE_HAL_L3_CKSUM_OK would mean that
* the checksum is correct, otherwise - the datagram is
* corrupted.
* @l4_cksum_valid: in L4 checksum is valid
* @l4_cksum: Result of TCP/UDP checksum check (by X3100 hardware).
* This field containing VXGE_HAL_L4_CKSUM_OK would mean that
* the checksum is correct. Otherwise - the packet is
* corrupted.
* @frame: Zero or more of vxge_hal_frame_type_e flags.
* See vxge_hal_frame_type_e {}.
* @proto: zero or more of vxge_hal_frame_proto_e flags. Reporting bits for
* various higher-layer protocols, including (but note restricted to)
* TCP and UDP. See vxge_hal_frame_proto_e {}.
* @is_vlan: If vlan tag is valid
* @vlan: VLAN tag extracted from the received frame.
* @rth_bucket: RTH bucket
* @rth_it_hit: Set, If RTH hash value calculated by the X3100 hardware
* has a matching entry in the Indirection table.
* @rth_spdm_hit: Set, If RTH hash value calculated by the X3100 hardware
* has a matching entry in the Socket Pair Direct Match table.
* @rth_hash_type: RTH hash code of the function used to calculate the hash.
* @rth_value: Receive Traffic Hashing(RTH) hash value. Produced by X3100
* hardware if RTH is enabled.
*/
typedef struct vxge_hal_ring_rxd_info_t {
u32 syn_flag;
u32 is_icmp;
u32 fast_path_eligible;
u32 l3_cksum_valid;
u32 l3_cksum;
u32 l4_cksum_valid;
u32 l4_cksum;
u32 frame;
u32 proto;
u32 is_vlan;
#define VXGE_HAL_VLAN_VID_MASK 0xfff
u32 vlan;
u32 rth_bucket;
u32 rth_it_hit;
u32 rth_spdm_hit;
u32 rth_hash_type;
u32 rth_value;
} vxge_hal_ring_rxd_info_t;
/*
* enum vxge_hal_frame_type_e - Ethernet frame format.
* @VXGE_HAL_FRAME_TYPE_DIX: DIX (Ethernet II) format.
* @VXGE_HAL_FRAME_TYPE_LLC: LLC format.
* @VXGE_HAL_FRAME_TYPE_SNAP: SNAP format.
* @VXGE_HAL_FRAME_TYPE_IPX: IPX format.
*
* Ethernet frame format.
*/
typedef enum vxge_hal_frame_type_e {
VXGE_HAL_FRAME_TYPE_DIX = 0x0,
VXGE_HAL_FRAME_TYPE_LLC = 0x1,
VXGE_HAL_FRAME_TYPE_SNAP = 0x2,
VXGE_HAL_FRAME_TYPE_IPX = 0x3,
} vxge_hal_frame_type_e;
typedef enum vxge_hal_tcp_option_e {
VXGE_HAL_TCPOPT_NOP = 1, /* Padding */
VXGE_HAL_TCPOPT_EOL = 0, /* End of options */
VXGE_HAL_TCPOPT_MSS = 2, /* Segment size negotiating */
VXGE_HAL_TCPOPT_WINDOW = 3, /* Window scaling */
VXGE_HAL_TCPOPT_SACK_PERM = 4, /* SACK Permitted */
VXGE_HAL_TCPOPT_SACK = 5, /* SACK Block */
VXGE_HAL_TCPOPT_TIMESTAMP = 8, /* Better RTT estimations/PAWS */
VXGE_HAL_TCPOPT_MD5SIG = 19, /* MD5 Signature (RFC2385) */
VXGE_HAL_TCPOLEN_TIMESTAMP = 10,
VXGE_HAL_TCPOLEN_TSTAMP_ALIGNED = 12
} vxge_hal_tcp_option_e;
/*
* enum vxge_hal_frame_proto_e - Higher-layer ethernet protocols.
* @VXGE_HAL_FRAME_PROTO_VLAN_TAGGED: VLAN.
* @VXGE_HAL_FRAME_PROTO_IPV4: IPv4.
* @VXGE_HAL_FRAME_PROTO_IPV6: IPv6.
* @VXGE_HAL_FRAME_PROTO_IP_FRAG: IP fragmented.
* @VXGE_HAL_FRAME_PROTO_TCP: TCP.
* @VXGE_HAL_FRAME_PROTO_UDP: UDP.
* @VXGE_HAL_FRAME_PROTO_TCP_OR_UDP: TCP or UDP.
*
* Higher layer ethernet protocols and options.
*/
typedef enum vxge_hal_frame_proto_e {
VXGE_HAL_FRAME_PROTO_VLAN_TAGGED = 0x80,
VXGE_HAL_FRAME_PROTO_IPV4 = 0x10,
VXGE_HAL_FRAME_PROTO_IPV6 = 0x08,
VXGE_HAL_FRAME_PROTO_IP_FRAG = 0x04,
VXGE_HAL_FRAME_PROTO_TCP = 0x02,
VXGE_HAL_FRAME_PROTO_UDP = 0x01,
VXGE_HAL_FRAME_PROTO_TCP_OR_UDP = (VXGE_HAL_FRAME_PROTO_TCP | \
VXGE_HAL_FRAME_PROTO_UDP)
} vxge_hal_frame_proto_e;
/*
* enum vxge_hal_ring_tcode_e - Transfer codes returned by adapter
* @VXGE_HAL_RING_T_CODE_OK: Transfer ok.
* @VXGE_HAL_RING_T_CODE_L3_CKSUM_MISMATCH: Layer 3 checksum presentation
* configuration mismatch.
* @VXGE_HAL_RING_T_CODE_L4_CKSUM_MISMATCH: Layer 4 checksum presentation
* configuration mismatch.
* @VXGE_HAL_RING_T_CODE_L3_L4_CKSUM_MISMATCH: Layer 3 and Layer 4 checksum
* presentation configuration mismatch.
* @VXGE_HAL_RING_T_CODE_L3_PKT_ERR: Layer 3 error¸unparseable packet,
* such as unknown IPv6 header.
* @VXGE_HAL_RING_T_CODE_L2_FRM_ERR: Layer 2 error¸frame integrity
* error, such as FCS or ECC).
* @VXGE_HAL_RING_T_CODE_BUF_SIZE_ERR: Buffer size error¸the RxD buffer(
* s) were not appropriately sized and data loss occurred.
* @VXGE_HAL_RING_T_CODE_INT_ECC_ERR: Internal ECC error¸RxD corrupted.
* @VXGE_HAL_RING_T_CODE_BENIGN_OVFLOW: Benign overflow¸the contents of
* Segment1 exceeded the capacity of Buffer1 and the remainder
* was placed in Buffer2. Segment2 now starts in Buffer3.
* No data loss or errors occurred.
* @VXGE_HAL_RING_T_CODE_ZERO_LEN_BUFF: Buffer size 0¸one of the RxDs
* assigned buffers has a size of 0 bytes.
* @VXGE_HAL_RING_T_CODE_FRM_DROP: Frame dropped¸either due to
* VPath Reset or because of a VPIN mismatch.
* @VXGE_HAL_RING_T_CODE_UNUSED: Unused
* @VXGE_HAL_RING_T_CODE_MULTI_ERR: Multiple errors¸more than one
* transfer code condition occurred.
*
* Transfer codes returned by adapter.
*/
typedef enum vxge_hal_ring_tcode_e {
VXGE_HAL_RING_T_CODE_OK = 0x0,
VXGE_HAL_RING_T_CODE_L3_CKSUM_MISMATCH = 0x1,
VXGE_HAL_RING_T_CODE_L4_CKSUM_MISMATCH = 0x2,
VXGE_HAL_RING_T_CODE_L3_L4_CKSUM_MISMATCH = 0x3,
VXGE_HAL_RING_T_CODE_L3_PKT_ERR = 0x5,
VXGE_HAL_RING_T_CODE_L2_FRM_ERR = 0x6,
VXGE_HAL_RING_T_CODE_BUF_SIZE_ERR = 0x7,
VXGE_HAL_RING_T_CODE_INT_ECC_ERR = 0x8,
VXGE_HAL_RING_T_CODE_BENIGN_OVFLOW = 0x9,
VXGE_HAL_RING_T_CODE_ZERO_LEN_BUFF = 0xA,
VXGE_HAL_RING_T_CODE_FRM_DROP = 0xC,
VXGE_HAL_RING_T_CODE_UNUSED = 0xE,
VXGE_HAL_RING_T_CODE_MULTI_ERR = 0xF
} vxge_hal_ring_tcode_e;
/*
* enum vxge_hal_ring_hash_type_e - RTH hash types
* @VXGE_HAL_RING_HASH_TYPE_NONE: No Hash
* @VXGE_HAL_RING_HASH_TYPE_TCP_IPV4: TCP IPv4
* @VXGE_HAL_RING_HASH_TYPE_UDP_IPV4: UDP IPv4
* @VXGE_HAL_RING_HASH_TYPE_IPV4: IPv4
* @VXGE_HAL_RING_HASH_TYPE_TCP_IPV6: TCP IPv6
* @VXGE_HAL_RING_HASH_TYPE_UDP_IPV6: UDP IPv6
* @VXGE_HAL_RING_HASH_TYPE_IPV6: IPv6
* @VXGE_HAL_RING_HASH_TYPE_TCP_IPV6_EX: TCP IPv6 extension
* @VXGE_HAL_RING_HASH_TYPE_UDP_IPV6_EX: UDP IPv6 extension
* @VXGE_HAL_RING_HASH_TYPE_IPV6_EX: IPv6 extension
*
* RTH hash types
*/
typedef enum vxge_hal_ring_hash_type_e {
VXGE_HAL_RING_HASH_TYPE_NONE = 0x0,
VXGE_HAL_RING_HASH_TYPE_TCP_IPV4 = 0x1,
VXGE_HAL_RING_HASH_TYPE_UDP_IPV4 = 0x2,
VXGE_HAL_RING_HASH_TYPE_IPV4 = 0x3,
VXGE_HAL_RING_HASH_TYPE_TCP_IPV6 = 0x4,
VXGE_HAL_RING_HASH_TYPE_UDP_IPV6 = 0x5,
VXGE_HAL_RING_HASH_TYPE_IPV6 = 0x6,
VXGE_HAL_RING_HASH_TYPE_TCP_IPV6_EX = 0x7,
VXGE_HAL_RING_HASH_TYPE_UDP_IPV6_EX = 0x8,
VXGE_HAL_RING_HASH_TYPE_IPV6_EX = 0x9
} vxge_hal_ring_hash_type_e;
/*
* struct vxge_hal_ring_rxd_1_t - One buffer mode RxD for ring
* @host_control: This field is exclusively for host use and is "readonly"
* from the adapter's perspective.
* @control_0:Bits 0 to 6 - RTH_Bucket get
* Bit 7 - Own Descriptor ownership bit. This bit is set to 1 by the
* host, and is set to 0 by the adapter.
* 0 - Host owns RxD and buffer.
* 1 - The adapter owns RxD and buffer.
* Bit 8 - Fast_Path_Eligible When set, indicates that the received
* frame meets all of the criteria for fast path processing.
* The required criteria are as follows:
* !SYN &
* (Transfer_Code == "Transfer OK") &
* (!Is_IP_Fragment) &
* ((Is_IPv4 & computed_L3_checksum == 0xFFFF) |
* (Is_IPv6)) &
* ((Is_TCP & computed_L4_checksum == 0xFFFF) |
* (Is_UDP & (computed_L4_checksum == 0xFFFF |
* computed _L4_checksum == 0x0000)))
* (same meaning for all RxD buffer modes)
* Bit 9 - L3 Checksum Correct
* Bit 10 - L4 Checksum Correct
* Bit 11 - Reserved
* Bit 12 to 15 - This field is written by the adapter. It is used
* to report the status of the frame transfer to the host.
* 0x0 - Transfer OK
* 0x4 - RDA Failure During Transfer
* 0x5 - Unparseable Packet, such as unknown IPv6 header.
* 0x6 - Frame integrity error (FCS or ECC).
* 0x7 - Buffer Size Error. The provided buffer(s) were not
* appropriately sized and data loss occurred.
* 0x8 - Internal ECC Error. RxD corrupted.
* 0x9 - IPv4 Checksum error
* 0xA - TCP/UDP Checksum error
* 0xF - Unknown Error or Multiple Error. Indicates an unknown
* problem or that more than one of transfer codes is set.
* Bit 16 - SYN The adapter sets this field to indicate that the
* incoming frame contained a TCP segment with its SYN bit set
* and its ACK bit NOT set. (same meaning for all RxD buffer modes)
* Bit 17 - Is ICMP
* Bit 18 - RTH_SPDM_HIT Set to 1 if there was a match in the
* Socket
* Pair Direct Match Table and the frame was steered based on SPDM.
* Bit 19 - RTH_IT_HIT Set to 1 if there was a match in the
* Indirection Table and the frame was steered based on hash
* indirection.
* Bit 20 to 23 - RTH_HASH_TYPE Indicates the function (hash type)
* that was used to calculate the hash.
* Bit 19 - IS_VLAN Set to '1' if the frame was/is VLAN tagged.
* Bit 25 to 26 - ETHER_ENCAP Reflects the Ethernet encapsulation
* of the received frame.
* 0x0 - Ethernet DIX
* 0x1 - LLC
* 0x2 - SNAP (includes Jumbo-SNAP)
* 0x3 - IPX
* Bit 27 - IS_IPV4 Set to '1' if the frame contains IPv4 packet.
* Bit 28 - IS_IPV6 Set to '1' if the frame contains IPv6 packet.
* Bit 29 - IS_IP_FRAG Set to '1' if the frame contains a
* fragmented IP packet.
* Bit 30 - IS_TCP Set to '1' if the frame contains a TCP segment.
* Bit 31 - IS_UDP Set to '1' if the frame contains a UDP message.
* Bit 32 to 47 - L3_Checksum[0:15] The IPv4 checksum value that
* arrived with the frame. If the resulting computed IPv4 header
* checksum for the frame did not produce the expected 0xFFFF value,
* then the transfer code would be set to 0x9.
* Bit 48 to 63 - L4_Checksum[0:15] TCP/UDP checksum value that
* arrived with the frame. If the resulting computed TCP/UDP checksum
* for the frame did not produce the expected 0xFFFF value, then the
* transfer code would be set to 0xA.
* @control_1:Bits 0 to 1 - Reserved
* Bits 2 to 15 - Buffer0_Size.This field is set by the host and
* eventually overwritten by the adapter. The host writes the
* available buffer size in bytes when it passes the descriptor to
* the adapter. When a frame is delivered the host, the adapter
* populates this field with the number of bytes written into the
* buffer. The largest supported buffer is 16, 383 bytes.
* Bit 16 to 47 - RTH Hash Value 32-bit RTH hash value. Only valid
* if RTH_HASH_TYPE (Control_0, bits 20:23) is nonzero.
* Bit 48 to 63 - VLAN_Tag[0:15] The contents of the variable
* portion of the VLAN tag, if one was detected by the adapter.
* This field is populated even if VLAN-tag stripping is enabled.
* @buffer0_ptr: Pointer to buffer. This field is populated by the driver.
*
* One buffer mode RxD for ring structure
*/
typedef struct vxge_hal_ring_rxd_1_t {
u64 host_control;
u64 control_0;
#define VXGE_HAL_RING_RXD_RTH_BUCKET_GET(ctrl0) bVAL7(ctrl0, 0)
#define VXGE_HAL_RING_RXD_RTH_BUCKET_ADAPTER vBIT(val, 0, 7)
#define VXGE_HAL_RING_RXD_LIST_OWN_GET(ctrl0) bVAL1(ctrl0, 7)
#define VXGE_HAL_RING_RXD_LIST_OWN_ADAPTER mBIT(7)
#define VXGE_HAL_RING_RXD_FAST_PATH_ELIGIBLE_GET(ctrl0) bVAL1(ctrl0, 8)
#define VXGE_HAL_RING_RXD_FAST_PATH_ELIGIBLE mBIT(8)
#define VXGE_HAL_RING_RXD_L3_CKSUM_CORRECT_GET(ctrl0) bVAL1(ctrl0, 9)
#define VXGE_HAL_RING_RXD_L3_CKSUM_CORRECT mBIT(9)
#define VXGE_HAL_RING_RXD_L4_CKSUM_CORRECT_GET(ctrl0) bVAL1(ctrl0, 10)
#define VXGE_HAL_RING_RXD_L4_CKSUM_CORRECT mBIT(10)
#define VXGE_HAL_RING_RXD_T_CODE_GET(ctrl0) bVAL4(ctrl0, 12)
#define VXGE_HAL_RING_RXD_T_CODE(val) vBIT(val, 12, 4)
#define VXGE_HAL_RING_RXD_T_CODE_OK VXGE_HAL_RING_T_CODE_OK
#define VXGE_HAL_RING_RXD_T_CODE_L3_CKSUM_MISMATCH \
VXGE_HAL_RING_T_CODE_L3_CKSUM_MISMATCH
#define VXGE_HAL_RING_RXD_T_CODE_L4_CKSUM_MISMATCH \
VXGE_HAL_RING_T_CODE_L4_CKSUM_MISMATCH
#define VXGE_HAL_RING_RXD_T_CODE_L3_L4_CKSUM_MISMATCH \
VXGE_HAL_RING_T_CODE_L3_L4_CKSUM_MISMATCH
#define VXGE_HAL_RING_RXD_T_CODE_L3_PKT_ERR VXGE_HAL_RING_T_CODE_L3_PKT_ERR
#define VXGE_HAL_RING_RXD_T_CODE_L2_FRM_ERR VXGE_HAL_RING_T_CODE_L2_FRM_ERR
#define VXGE_HAL_RING_RXD_T_CODE_BUF_SIZE_ERR \
VXGE_HAL_RING_T_CODE_BUF_SIZE_ERR
#define VXGE_HAL_RING_RXD_T_CODE_INT_ECC_ERR VXGE_HAL_RING_T_CODE_INT_ECC_ERR
#define VXGE_HAL_RING_RXD_T_CODE_BENIGN_OVFLOW \
VXGE_HAL_RING_T_CODE_BENIGN_OVFLOW
#define VXGE_HAL_RING_RXD_T_CODE_ZERO_LEN_BUFF \
VXGE_HAL_RING_T_CODE_ZERO_LEN_BUFF
#define VXGE_HAL_RING_RXD_T_CODE_FRM_DROP VXGE_HAL_RING_T_CODE_FRM_DROP
#define VXGE_HAL_RING_RXD_T_CODE_UNUSED VXGE_HAL_RING_T_CODE_UNUSED
#define VXGE_HAL_RING_RXD_T_CODE_MULTI_ERR VXGE_HAL_RING_T_CODE_MULTI_ERR
#define VXGE_HAL_RING_RXD_SYN_GET(ctrl0) bVAL1(ctrl0, 16)
#define VXGE_HAL_RING_RXD_SYN mBIT(16)
#define VXGE_HAL_RING_RXD_IS_ICMP_GET(ctrl0) bVAL1(ctrl0, 17)
#define VXGE_HAL_RING_RXD_IS_ICMP mBIT(17)
#define VXGE_HAL_RING_RXD_RTH_SPDM_HIT_GET(ctrl0) bVAL1(ctrl0, 18)
#define VXGE_HAL_RING_RXD_RTH_SPDM_HIT mBIT(18)
#define VXGE_HAL_RING_RXD_RTH_IT_HIT_GET(ctrl0) bVAL1(ctrl0, 19)
#define VXGE_HAL_RING_RXD_RTH_IT_HIT mBIT(19)
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_GET(ctrl0) bVAL4(ctrl0, 20)
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE(val) vBIT(val, 20, 4)
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_NONE VXGE_HAL_RING_HASH_TYPE_NONE
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV4 \
VXGE_HAL_RING_HASH_TYPE_TCP_IPV4
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV4 \
VXGE_HAL_RING_HASH_TYPE_UDP_IPV4
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV4 VXGE_HAL_RING_HASH_TYPE_IPV4
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV6 \
VXGE_HAL_RING_HASH_TYPE_TCP_IPV6
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV6 \
VXGE_HAL_RING_HASH_TYPE_UDP_IPV6
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV6 VXGE_HAL_RING_HASH_TYPE_IPV6
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV6_EX \
VXGE_HAL_RING_HASH_TYPE_TCP_IPV6_EX
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV6_EX \
VXGE_HAL_RING_HASH_TYPE_UDP_IPV6_EX
#define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV6_EX VXGE_HAL_RING_HASH_TYPE_IPV6_EX
#define VXGE_HAL_RING_RXD_IS_VLAN_GET(ctrl0) bVAL1(ctrl0, 24)
#define VXGE_HAL_RING_RXD_IS_VLAN mBIT(24)
#define VXGE_HAL_RING_RXD_ETHER_ENCAP_GET(ctrl0) bVAL2(ctrl0, 25)
#define VXGE_HAL_RING_RXD_ETHER_ENCAP(val) vBIT(val, 25, 2)
#define VXGE_HAL_RING_RXD_ETHER_ENCAP_DIX VXGE_HAL_FRAME_TYPE_DIX
#define VXGE_HAL_RING_RXD_ETHER_ENCAP_LLC VXGE_HAL_FRAME_TYPE_LLC
#define VXGE_HAL_RING_RXD_ETHER_ENCAP_SNAP VXGE_HAL_FRAME_TYPE_SNAP
#define VXGE_HAL_RING_RXD_ETHER_ENCAP_IPX VXGE_HAL_FRAME_TYPE_IPX
#define VXGE_HAL_RING_RXD_IS_IPV4_GET(ctrl0) bVAL1(ctrl0, 27)
#define VXGE_HAL_RING_RXD_IS_IPV4 mBIT(27)
#define VXGE_HAL_RING_RXD_IS_IPV6_GET(ctrl0) bVAL1(ctrl0, 28)
#define VXGE_HAL_RING_RXD_IS_IPV6 mBIT(28)
#define VXGE_HAL_RING_RXD_IS_IPV_FRAG_GET(ctrl0) bVAL1(ctrl0, 29)
#define VXGE_HAL_RING_RXD_IS_IPV_FRAG mBIT(29)
#define VXGE_HAL_RING_RXD_IS_TCP_GET(ctrl0) bVAL1(ctrl0, 30)
#define VXGE_HAL_RING_RXD_IS_TCP mBIT(30)
#define VXGE_HAL_RING_RXD_IS_UDP_GET(ctrl0) bVAL1(ctrl0, 31)
#define VXGE_HAL_RING_RXD_IS_UDP mBIT(31)
#define VXGE_HAL_RING_RXD_FRAME_PROTO_GET(ctrl0) bVAL5(ctrl0, 27)
#define VXGE_HAL_RING_RXD_FRAME_PROTO(val) vBIT(val, 27, 5)
#define VXGE_HAL_RING_RXD_FRAME_PROTO_IPV4 VXGE_HAL_FRAME_PROTO_IPV4
#define VXGE_HAL_RING_RXD_FRAME_PROTO_IPV6 VXGE_HAL_FRAME_PROTO_IPV6
#define VXGE_HAL_RING_RXD_FRAME_PROTO_IP_FRAG VXGE_HAL_FRAME_PROTO_IP_FRAG
#define VXGE_HAL_RING_RXD_FRAME_PROTO_TCP VXGE_HAL_FRAME_PROTO_TCP
#define VXGE_HAL_RING_RXD_FRAME_PROTO_UDP VXGE_HAL_FRAME_PROTO_UDP
#define VXGE_HAL_RING_RXD_FRAME_PROTO_TCP_OR_UDP (VXGE_HAL_FRAME_PROTO_TCP |\
VXGE_HAL_FRAME_PROTO_UDP)
#define VXGE_HAL_RING_RXD_L3_CKSUM_GET(ctrl0) bVAL16(ctrl0, 32)
#define VXGE_HAL_RING_RXD_L3_CKSUM(val) vBIT(val, 32, 16)
#define VXGE_HAL_RING_RXD_L4_CKSUM_GET(ctrl0) bVAL16(ctrl0, 48)
#define VXGE_HAL_RING_RXD_L4_CKSUM(val) vBIT(val, 48, 16)
u64 control_1;
#define VXGE_HAL_RING_RXD_LIST_TAIL_OWN_ADAPTER mBIT(0)
#define VXGE_HAL_RING_RXD_1_BUFFER0_SIZE_GET(ctrl1) bVAL14(ctrl1, 2)
#define VXGE_HAL_RING_RXD_1_BUFFER0_SIZE(val) vBIT(val, 2, 14)
#define VXGE_HAL_RING_RXD_1_BUFFER0_SIZE_MASK vBIT(0x3FFF, 2, 14)
#define VXGE_HAL_RING_RXD_1_RTH_HASH_VAL_GET(ctrl1) bVAL32(ctrl1, 16)
#define VXGE_HAL_RING_RXD_1_RTH_HASH_VAL(val) vBIT(val, 16, 32)
#define VXGE_HAL_RING_RXD_VLAN_TAG_GET(ctrl1) bVAL16(ctrl1, 48)
#define VXGE_HAL_RING_RXD_VLAN_TAG(val) vBIT(val, 48, 16)
u64 buffer0_ptr;
} vxge_hal_ring_rxd_1_t;
/*
* struct vxge_hal_ring_rxd_3_t - Three buffer mode RxD for ring
* @host_control: This field is exclusively for host use and is "readonly"
* from the adapter's perspective.
* @control_0:Bits 0 to 6 - RTH_Bucket get
* Bit 7 - Own Descriptor ownership bit. This bit is set to 1
* by the host, and is set to 0 by the adapter.
* 0 - Host owns RxD and buffer.
* 1 - The adapter owns RxD and buffer.
* Bit 8 - Fast_Path_Eligible When set, indicates that the
* received frame meets all of the criteria for fast path processing.
* The required criteria are as follows:
* !SYN &
* (Transfer_Code == "Transfer OK") &
* (!Is_IP_Fragment) &
* ((Is_IPv4 & computed_L3_checksum == 0xFFFF) |
* (Is_IPv6)) &
* ((Is_TCP & computed_L4_checksum == 0xFFFF) |
* (Is_UDP & (computed_L4_checksum == 0xFFFF |
* computed _L4_checksum == 0x0000)))
* (same meaning for all RxD buffer modes)
* Bit 9 - L3 Checksum Correct
* Bit 10 - L4 Checksum Correct
* Bit 11 - Reserved
* Bit 12 to 15 - This field is written by the adapter. It is used
* to report the status of the frame transfer to the host.
* 0x0 - Transfer OK
* 0x4 - RDA Failure During Transfer
* 0x5 - Unparseable Packet, such as unknown IPv6 header.
* 0x6 - Frame integrity error (FCS or ECC).
* 0x7 - Buffer Size Error. The provided buffer(s) were not
* appropriately sized and data loss occurred.
* 0x8 - Internal ECC Error. RxD corrupted.
* 0x9 - IPv4 Checksum error
* 0xA - TCP/UDP Checksum error
* 0xF - Unknown Error or Multiple Error. Indicates an unknown
* problem or that more than one of transfer codes is set.
* Bit 16 - SYN The adapter sets this field to indicate that the
* incoming frame contained a TCP segment with its SYN bit set
* and its ACK bit NOT set. (same meaning for all RxD buffer modes)
* Bit 17 - Is ICMP
* Bit 18 - RTH_SPDM_HIT Set to 1 if there was a match in the
* Socket
* Pair Direct Match Table and the frame was steered based on SPDM.
* Bit 19 - RTH_IT_HIT Set to 1 if there was a match in the
* Indirection Table and the frame was steered based on hash
* indirection.
* Bit 20 to 23 - RTH_HASH_TYPE Indicates the function (hash type)
* that was used to calculate the hash.
* Bit 19 - IS_VLAN Set to '1' if the frame was/is VLAN tagged.
* Bit 25 to 26 - ETHER_ENCAP Reflects the Ethernet encapsulation
* of the received frame.
* 0x0 - Ethernet DIX
* 0x1 - LLC
* 0x2 - SNAP (includes Jumbo-SNAP)
* 0x3 - IPX
* Bit 27 - IS_IPV4 Set to '1' if the frame contains IPv4 packet.
* Bit 28 - IS_IPV6 Set to '1' if the frame contains IPv6 packet.
* Bit 29 - IS_IP_FRAG Set to '1' if the frame contains a
* fragmented IP packet.
* Bit 30 - IS_TCP Set to '1' if the frame contains a TCP segment.
* Bit 31 - IS_UDP Set to '1' if the frame contains a UDP message.
* Bit 32 to 47 - L3_Checksum[0:15] The IPv4 checksum value that
* arrived with the frame. If the resulting computed IPv4 header
* checksum for the frame did not produce the expected 0xFFFF value,
* then the transfer code would be set to 0x9.
* Bit 48 to 63 - L4_Checksum[0:15] TCP/UDP checksum value that
* arrived with the frame. If the resulting computed TCP/UDP checksum
* for the frame did not produce the expected 0xFFFF value, then the
* transfer code would be set to 0xA.
* @control_1:Bit 0 - This field must be used in conjunction with the Ownership
* field (above).
* 1 - Set by the host to indicate that the RxD points to fresh
* buffers.
* 0 - Cleared by the adapter to indicate that frame data has been
* placed into the assigned buffers, and that the host once again
* owns the descriptor.
* (Note: Please observe the usage guidelines outlined in the
* Ownership field (above)).
* Bit 1 - Unused. Ignored by Adapter on RxD read. Set to 0
* by Adapter on RxD write.
* Bits 2 to 15 - This field is written by the host and by X3100.
* The host writes the available buffer 0 size in bytes when it
* passes the descriptor to the X3100. The X3100 writes the number
* of bytes written to the buffer when it passes the descriptor back
* to the host.
* Bits 16 to 17 - Reserved
* Bits 18 to 31 - This field is set by the host and eventually
* overwritten by the adapter. The host writes the available
* buffer 1size in bytes when it passes the descriptor to the adapter.
* When a frame is delivered the host, the adapter populates this field
* with the number of bytes written into the buffer 1. The largest
* supported buffer is 16, 383 bytes.
* Bits 32 to 33 - Reserved
* Bits 34 to 47 - This field is set by the host and eventually
* overwritten by the adapter. The host writes the available
* buffer 2 size in bytes when it passes the descriptor to the adapter.
* When a frame is delivered the host, the adapter populates this field
* with the number of bytes written into the buffer 2. The largest
* supported buffer is 16, 383 bytes.
* Bit 48 to 63 - VLAN_Tag[0:15] The contents of the variable
* portion of the VLAN tag, if one was detected by the adapter. This
* field is populated even if VLAN-tag stripping is enabled.
* @buffer0_ptr: Pointer to buffer 0. This field is populated by the driver.
* In 3-buffer mode, when the RxD is returned to the host,
* buffer0_ptr field will be overwritten if the following conditions
* are met:
* 1 - RTH_Disable in the PRC_CTRL register is not set.
* 2 - RTH is enabled and a valid hash value was calculated for the
* frame. This will be indicated by a non-zero value in the
* RTH_HASH_TYPE field (Control_0, bits 20:23). In the event that the
* pointer is overwritten on return to the host, bits 0:31 will be
* all zeroes while bits 32:63 will contain the calculated hash value.
* @buffer1_ptr: Pointer to buffer 1. This field is populated by the driver.
* @buffer2_ptr: Pointer to buffer 2. This field is populated by the driver.
*
* Three buffer mode RxD for ring structure
*/
typedef struct vxge_hal_ring_rxd_3_t {
u64 host_control;
u64 control_0;
/*
* The following bit fields are common in all the three buffer modes and are
* defined in vxge_hal_ring_rxd_1_t
* #define VXGE_HAL_RING_RXD_RTH_BUCKET_GET(ctrl0) bVAL7(ctrl0, 0)
* #define VXGE_HAL_RING_RXD_RTH_BUCKET_ADAPTER vBIT(val, 0, 7)
*
* #define VXGE_HAL_RING_RXD_LIST_OWN_GET(ctrl0) bVAL1(ctrl0, 7)
* #define VXGE_HAL_RING_RXD_LIST_OWN_ADAPTER mBIT(7)
*
* #define VXGE_HAL_RING_RXD_FAST_PATH_ELIGIBLE_GET(ctrl0) \
* bVAL1(ctrl0, 8)
* #define VXGE_HAL_RING_RXD_FAST_PATH_ELIGIBLE mBIT(8)
*
* #define VXGE_HAL_RING_RXD_L3_CKSUM_CORRECT_GET(ctrl0) \
* bVAL1(ctrl0, 9)
* #define VXGE_HAL_RING_RXD_L3_CKSUM_CORRECT mBIT(9)
*
* #define VXGE_HAL_RING_RXD_L4_CKSUM_CORRECT_GET(ctrl0) \
* bVAL1(ctrl0, 10)
* #define VXGE_HAL_RING_RXD_L4_CKSUM_CORRECT mBIT(10)
*
* #define VXGE_HAL_RING_RXD_T_CODE_GET(ctrl0) bVAL4(ctrl0, 12)
* #define VXGE_HAL_RING_RXD_T_CODE(val) vBIT(val, 12, 4)
* #define VXGE_HAL_RING_RXD_T_CODE_OK VXGE_HAL_RING_T_CODE_OK
* #define VXGE_HAL_RING_RXD_T_CODE_L3_CKSUM_MISMATCH \
* VXGE_HAL_RING_T_CODE_L3_CKSUM_MISMATCH
* #define VXGE_HAL_RING_RXD_T_CODE_L4_CKSUM_MISMATCH \
* VXGE_HAL_RING_T_CODE_L4_CKSUM_MISMATCH
* #define VXGE_HAL_RING_RXD_T_CODE_L3_L4_CKSUM_MISMATCH \
* VXGE_HAL_RING_T_CODE_L3_L4_CKSUM_MISMATCH
* #define VXGE_HAL_RING_RXD_T_CODE_L3_PKT_ERR \
* VXGE_HAL_RING_T_CODE_L3_PKT_ERR
* #define VXGE_HAL_RING_RXD_T_CODE_L2_FRM_ERR \
* VXGE_HAL_RING_T_CODE_L2_FRM_ERR
* #define VXGE_HAL_RING_RXD_T_CODE_BUF_SIZE_ERR \
* VXGE_HAL_RING_T_CODE_BUF_SIZE_ERR
* #define VXGE_HAL_RING_RXD_T_CODE_INT_ECC_ERR \
* VXGE_HAL_RING_T_CODE_INT_ECC_ERR
* #define VXGE_HAL_RING_RXD_T_CODE_BENIGN_OVFLOW \
* VXGE_HAL_RING_T_CODE_BENIGN_OVFLOW
* #define VXGE_HAL_RING_RXD_T_CODE_ZERO_LEN_BUFF \
* VXGE_HAL_RING_T_CODE_ZERO_LEN_BUFF
* #define VXGE_HAL_RING_RXD_T_CODE_FRM_DROP VXGE_HAL_RING_T_CODE_FRM_DROP
* #define VXGE_HAL_RING_RXD_T_CODE_UNUSED VXGE_HAL_RING_T_CODE_UNUSED
* #define VXGE_HAL_RING_RXD_T_CODE_MULTI_ERR \
* VXGE_HAL_RING_T_CODE_MULTI_ERR
*
* #define VXGE_HAL_RING_RXD_SYN_GET(ctrl0) bVAL1(ctrl0, 16)
* #define VXGE_HAL_RING_RXD_SYN mBIT(16)
*
* #define VXGE_HAL_RING_RXD_IS_ICMP_GET(ctrl0) bVAL1(ctrl0, 17)
* #define VXGE_HAL_RING_RXD_IS_ICMP mBIT(17)
*
* #define VXGE_HAL_RING_RXD_RTH_SPDM_HIT_GET(ctrl0) bVAL1(ctrl0, 18)
* #define VXGE_HAL_RING_RXD_RTH_SPDM_HIT mBIT(18)
*
* #define VXGE_HAL_RING_RXD_RTH_IT_HIT_GET(ctrl0) bVAL1(ctrl0, 19)
* #define VXGE_HAL_RING_RXD_RTH_IT_HIT mBIT(19)
*
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_GET(ctrl0) bVAL4(ctrl0, 20)
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE(val) vBIT(val, 20, 4)
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_NONE \
* VXGE_HAL_RING_HASH_TYPE_NONE
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV4 \
* VXGE_HAL_RING_HASH_TYPE_TCP_IPV4
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV4 \
* VXGE_HAL_RING_HASH_TYPE_UDP_IPV4
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV4 \
* VXGE_HAL_RING_HASH_TYPE_IPV4
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV6 \
* VXGE_HAL_RING_HASH_TYPE_TCP_IPV6
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV6 \
* VXGE_HAL_RING_HASH_TYPE_UDP_IPV6
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV6 \
* VXGE_HAL_RING_HASH_TYPE_IPV6
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV6_EX \
* VXGE_HAL_RING_HASH_TYPE_TCP_IPV6_EX
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV6_EX \
* VXGE_HAL_RING_HASH_TYPE_UDP_IPV6_EX
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV6_EX \
* VXGE_HAL_RING_HASH_TYPE_IPV6_EX
*
* #define VXGE_HAL_RING_RXD_IS_VLAN_GET(ctrl0) bVAL1(ctrl0, 24)
* #define VXGE_HAL_RING_RXD_IS_VLAN mBIT(24)
*
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_GET(ctrl0) bVAL2(ctrl0, 25)
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP(val) vBIT(val, 25, 2)
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_DIX VXGE_HAL_FRAME_TYPE_DIX
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_LLC VXGE_HAL_FRAME_TYPE_LLC
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_SNAP VXGE_HAL_FRAME_TYPE_SNAP
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_IPX VXGE_HAL_FRAME_TYPE_IPX
*
* #define VXGE_HAL_RING_RXD_IS_IPV4_GET(ctrl0) bVAL1(ctrl0, 27)
* #define VXGE_HAL_RING_RXD_IS_IPV4 mBIT(27)
*
* #define VXGE_HAL_RING_RXD_IS_IPV6_GET(ctrl0) bVAL1(ctrl0, 28)
* #define VXGE_HAL_RING_RXD_IS_IPV6 mBIT(28)
*
* #define VXGE_HAL_RING_RXD_IS_IPV_FRAG_GET(ctrl0) bVAL1(ctrl0, 29)
* #define VXGE_HAL_RING_RXD_IS_IPV_FRAG mBIT(29)
*
* #define VXGE_HAL_RING_RXD_IS_TCP_GET(ctrl0) bVAL1(ctrl0, 30)
* #define VXGE_HAL_RING_RXD_IS_TCP mBIT(30)
*
* #define VXGE_HAL_RING_RXD_IS_UDP_GET(ctrl0) bVAL1(ctrl0, 31)
* #define VXGE_HAL_RING_RXD_IS_UDP mBIT(31)
*
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_GET(ctrl0) bVAL5(ctrl0, 27)
* #define VXGE_HAL_RING_RXD_FRAME_PROTO(val) vBIT(val, 27, 5)
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_IPV4 \
* VXGE_HAL_FRAME_PROTO_IPV4
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_IPV6 \
* VXGE_HAL_FRAME_PROTO_IPV6
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_IP_FRAG \
* VXGE_HAL_FRAME_PROTO_IP_FRAG
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_TCP \
* VXGE_HAL_FRAME_PROTO_TCP
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_UDP \
* VXGE_HAL_FRAME_PROTO_UDP
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_TCP_OR_UDP \
* (VXGE_HAL_FRAME_PROTO_TCP | VXGE_HAL_FRAME_PROTO_UDP)
*
* #define VXGE_HAL_RING_RXD_L3_CKSUM_GET(ctrl0) bVAL16(ctrl0, 32)
* #define VXGE_HAL_RING_RXD_L3_CKSUM(val) vBIT(val, 32, 16)
*
* #define VXGE_HAL_RING_RXD_L4_CKSUM_GET(ctrl0) bVAL16(ctrl0, 48)
* #define VXGE_HAL_RING_RXD_L4_CKSUM(val) vBIT(val, 48, 16)
*/
u64 control_1;
#define VXGE_HAL_RING_RXD_3_BUFFER_EMPTY_GET(ctrl1) bVAL1(ctrl1, 0)
#define VXGE_HAL_RING_RXD_3_BUFFER_EMPTY mBIT(0)
#define VXGE_HAL_RING_RXD_3_BUFFER0_SIZE_GET(ctrl1) bVAL14(ctrl1, 2)
#define VXGE_HAL_RING_RXD_3_BUFFER0_SIZE(val) vBIT(val, 2, 14)
#define VXGE_HAL_RING_RXD_3_BUFFER0_SIZE_MASK vBIT(0x3FFc, 2, 14)
#define VXGE_HAL_RING_RXD_3_BUFFER1_SIZE_GET(ctrl1) bVAL14(ctrl1, 18)
#define VXGE_HAL_RING_RXD_3_BUFFER1_SIZE(val) vBIT(val, 18, 14)
#define VXGE_HAL_RING_RXD_3_BUFFER1_SIZE_MASK vBIT(0x3FFc, 18, 14)
#define VXGE_HAL_RING_RXD_3_BUFFER2_SIZE_GET(ctrl1) bVAL14(ctrl1, 34)
#define VXGE_HAL_RING_RXD_3_BUFFER2_SIZE(val) vBIT(val, 34, 14)
#define VXGE_HAL_RING_RXD_3_BUFFER2_SIZE_MASK vBIT(0x3FFc, 34, 14)
/*
* The following bit fields are common in all the three buffer modes and are
* defined in vxge_hal_ring_rxd_1_t
* #define VXGE_HAL_RING_RXD_VLAN_TAG_GET(ctrl1) bVAL16(ctrl1, 48)
* #define VXGE_HAL_RING_RXD_VLAN_TAG(val) vBIT(val, 48, 16)
*/
u64 buffer0_ptr;
#define VXGE_HAL_RING_RXD_3_RTH_HASH_VALUE_GET(b0_ptr) bVAL32(b0_ptr, 32)
#define VXGE_HAL_RING_RXD_3_RTH_HASH_VALUE(val) vBIT(val, 32, 32)
u64 buffer1_ptr;
u64 buffer2_ptr;
} vxge_hal_ring_rxd_3_t;
/*
* struct vxge_hal_ring_rxd_5_t - Five buffer mode RxD for ring
* @host_control: This 32 bitfield is exclusively for host use and is "readonly"
* from the adapter's perspective.
* @control_2: Bits 0 to 1 - Reserved
* Bits 2 to 15 - This field is set by the host and eventually
* overwritten by the adapter. The host writes the available buffer
* 3 size in bytes when it pas ses the descriptor to the adapter.
* When a frame is delivered the host, the adapter populates this
* field with the number of bytes written into the buffer. The
* largest supported buffer is 16, 383 bytes.
* Bits 16 to 17 - Reserved
* Bits 18 to 31 - This field is set by the host and eventually
* overwritten by the adapter. The host writes the available buffer
* 4 size in bytes when it passes the descriptor to the adapter.
* When a frame is delivered the host, the adapter populates this
* field with the number of bytes written into the buffer.
* The largest supported buffer is 16, 383 bytes.
* @control_0: Bits 0 to 6 - RTH_Bucket get
* Bit 7 - Own Descriptor ownership bit. This bit is set to 1 by
* the host, and is set to 0 by the adapter.
* 0 - Host owns RxD and buffer.
* 1 - The adapter owns RxD and buffer.
* Bit 8 - Fast_Path_Eligible When set,indicates that the received
* frame meets all of the criteria for fast path processing.
* The required criteria are as follows:
* !SYN &
* (Transfer_Code == "Transfer OK") &
* (!Is_IP_Fragment) &
* ((Is_IPv4 & computed_L3_checksum == 0xFFFF) |
* (Is_IPv6)) &
* ((Is_TCP & computed_L4_checksum == 0xFFFF) |
* (Is_UDP & (computed_L4_checksum == 0xFFFF |
* computed _L4_checksum == 0x0000)))
* (same meaning for all RxD buffer modes)
* Bit 9 - L3 Checksum Correct
* Bit 10 - L4 Checksum Correct
* Bit 11 - Reserved
* Bit 12 to 15 - This field is written by the adapter. It is used
* to report the status of the frame transfer to the host.
* 0x0 - Transfer OK
* 0x4 - RDA Failure During Transfer
* 0x5 - Unparseable Packet, such as unknown IPv6 header.
* 0x6 - Frame integrity error (FCS or ECC).
* 0x7 - Buffer Size Error. The provided buffer(s) were not
* appropriately sized and data loss occurred.
* 0x8 - Internal ECC Error. RxD corrupted.
* 0x9 - IPv4 Checksum error
* 0xA - TCP/UDP Checksum error
* 0xF - Unknown Error or Multiple Error. Indicates an unknown
* problem or that more than one of transfer codes is set.
* Bit 16 - SYN The adapter sets this field to indicate that the
* incoming frame contained a TCP segment with its SYN bit set
* and its ACK bit NOT set. (same meaning for all RxD buffer modes)
* Bit 17 - Is ICMP
* Bit 18 - RTH_SPDM_HIT Set to 1 if there was a match in the
* Socket Pair Direct Match Table and the frame was steered based on
* SPDM.
* Bit 19 - RTH_IT_HIT Set to 1 if there was a match in the
* Indirection Table and the frame was steered based on hash
* indirection.
* Bit 20 to 23 - RTH_HASH_TYPE Indicates the function (hash type)
* that was used to calculate the hash.
* Bit 19 - IS_VLAN Set to '1' if the frame was/is VLAN tagged.
* Bit 25 to 26 - ETHER_ENCAP Reflects the Ethernet encapsulation
* of the received frame.
* 0x0 - Ethernet DIX
* 0x1 - LLC
* 0x2 - SNAP (includes Jumbo-SNAP)
* 0x3 - IPX
* Bit 27 - IS_IPV4 Set to '1' if the frame contains IPv4 packet.
* Bit 28 - IS_IPV6 Set to '1' if the frame contains IPv6 packet.
* Bit 29 - IS_IP_FRAG Set to '1' if the frame contains a
* fragmented IP packet.
* Bit 30 - IS_TCP Set to '1' if the frame contains a TCP segment.
* Bit 31 - IS_UDP Set to '1' if the frame contains a UDP message.
* Bit 32 to 47 - L3_Checksum[0:15] The IPv4 checksum value that
* arrived with the frame. If the resulting computed IPv4 header
* checksum for the frame did not produce the expected 0xFFFF value,
* then the transfer code would be set to 0x9.
* Bit 48 to 63 - L4_Checksum[0:15] TCP/UDP checksum value that
* arrived with the frame. If the resulting computed TCP/UDP checksum
* for the frame did not produce the expected 0xFFFF value, then the
* transfer code would be set to 0xA.
* @control_1: Bits 0 to 1 - Reserved.
* Bits 2 to 15 - This field is written by the host and by X3100.
* The host writes the available buffer 0 size in bytes when it
* passes the descriptor to the X3100. The X3100 writes the number
* of bytes written to the buffer when it passes the descriptor back
* to the host.
* Bits 16 to 17 - Reserved
* Bits 18 to 31 - This field is set by the host and eventually
* overwritten by the adapter. The host writes the available
* buffer 1 size in bytes when it passes the descriptor to the adapter.
* When a frame is delivered the host, the adapter populates this field
* with the number of bytes written into the buffer 1. The largest
* supported buffer is 16, 383 bytes.
* Bits 32 to 33 - Reserved
* Bits 34 to 47 - This field is set by the host and eventually
* overwritten by the adapter. The host writes the available
* buffer 2 size in bytes when it passes the descriptor to the adapter.
* When a frame is delivered the host, the adapter populates this field
* with the number of bytes written into the buffer 2. The largest
* supported buffer is 16, 383 bytes.
* Bit 48 to 63 - VLAN_Tag[0:15] The contents of the variable
* portion of the VLAN tag, if one was detected by the adapter. This
* field is populated even if VLAN-tag stripping is enabled.
* @buffer0_ptr: Pointer to buffer 0. This field is populated by the driver.
* In 5-buffer mode, when the RxD is returned to the host,
* buffer0_ptr field will be overwritten if the following conditions
* are met:
* 1 - RTH_Disable in the PRC_CTRL register is not set.
* 2 - RTH is enabled and a valid hash value was calculated for the
* frame. This will be indicated by a non-zero value in the
* RTH_HASH_TYPE field (Control_0, bits 20:23). In the event that the
* pointer is overwritten on return to the host, bits 0:31 will be
* all zeroes while bits 32:63 will contain the calculated hash value.
* @buffer1_ptr: Pointer to buffer 1. This field is populated by the driver.
* @buffer2_ptr: Pointer to buffer 2. This field is populated by the driver.
* @buffer3_ptr: Pointer to buffer 3. This field is populated by the driver.
* @buffer4_ptr: Pointer to buffer 4. This field is populated by the driver.
* @pad: Pad to align at cache line boundary
*
* Three buffer mode RxD for ring structure
*/
typedef struct vxge_hal_ring_rxd_5_t {
#if defined(VXGE_OS_HOST_BIG_ENDIAN)
u32 host_control;
u32 control_2;
#else
u32 control_2;
u32 host_control;
#endif
#define VXGE_HAL_RING_RXD_5_BUFFER3_SIZE_GET(ctrl2) bVAL14(ctrl2, 34)
#define VXGE_HAL_RING_RXD_5_BUFFER3_SIZE(val) vBIT(val, 34, 14)
#define VXGE_HAL_RING_RXD_5_BUFFER3_SIZE_MASK vBIT(0x3FFF, 34, 14)
#define VXGE_HAL_RING_RXD_5_BUFFER4_SIZE_GET(ctrl2) bVAL14(ctrl2, 50)
#define VXGE_HAL_RING_RXD_5_BUFFER4_SIZE(val) vBIT(val, 50, 14)
#define VXGE_HAL_RING_RXD_5_BUFFER4_SIZE_MASK vBIT(0x3FFF, 50, 14)
u64 control_0;
/*
* The following bit fields are common in all the three buffer modes and are
* defined in vxge_hal_ring_rxd_1_t
* #define VXGE_HAL_RING_RXD_RTH_BUCKET_GET(ctrl0) bVAL7(ctrl0, 0)
* #define VXGE_HAL_RING_RXD_RTH_BUCKET_ADAPTER vBIT(val, 0, 7)
*
* #define VXGE_HAL_RING_RXD_LIST_OWN_GET(ctrl0) bVAL1(ctrl0, 7)
* #define VXGE_HAL_RING_RXD_LIST_OWN_ADAPTER mBIT(7)
*
* #define VXGE_HAL_RING_RXD_FAST_PATH_ELIGIBLE_GET(ctrl0 \
* bVAL1(ctrl0, 8)
* #define VXGE_HAL_RING_RXD_FAST_PATH_ELIGIBLE mBIT(8)
*
* #define VXGE_HAL_RING_RXD_L3_CKSUM_CORRECT_GET(ctrl0) \
* bVAL1(ctrl0, 9)
* #define VXGE_HAL_RING_RXD_L3_CKSUM_CORRECT mBIT(9)
*
* #define VXGE_HAL_RING_RXD_L4_CKSUM_CORRECT_GET(ctrl0) \
* bVAL1(ctrl0, 10)
* #define VXGE_HAL_RING_RXD_L4_CKSUM_CORRECT mBIT(10)
*
* #define VXGE_HAL_RING_RXD_T_CODE_GET(ctrl0) bVAL4(ctrl0, 12)
* #define VXGE_HAL_RING_RXD_T_CODE(val) vBIT(val, 12, 4)
* #define VXGE_HAL_RING_RXD_T_CODE_OK \
* VXGE_HAL_RING_T_CODE_OK
* #define VXGE_HAL_RING_RXD_T_CODE_L3_CKSUM_MISMATCH \
* VXGE_HAL_RING_T_CODE_L3_CKSUM_MISMATCH
* #define VXGE_HAL_RING_RXD_T_CODE_L4_CKSUM_MISMATCH \
* VXGE_HAL_RING_T_CODE_L4_CKSUM_MISMATCH
* #define VXGE_HAL_RING_RXD_T_CODE_L3_L4_CKSUM_MISMATCH \
* VXGE_HAL_RING_T_CODE_L3_L4_CKSUM_MISMATCH
* #define VXGE_HAL_RING_RXD_T_CODE_L3_PKT_ERR \
* VXGE_HAL_RING_T_CODE_L3_PKT_ERR
* #define VXGE_HAL_RING_RXD_T_CODE_L2_FRM_ERR \
* VXGE_HAL_RING_T_CODE_L2_FRM_ERR
* #define VXGE_HAL_RING_RXD_T_CODE_BUF_SIZE_ERR \
* VXGE_HAL_RING_T_CODE_BUF_SIZE_ERR
* #define VXGE_HAL_RING_RXD_T_CODE_INT_ECC_ERR \
* VXGE_HAL_RING_T_CODE_INT_ECC_ERR
* #define VXGE_HAL_RING_RXD_T_CODE_BENIGN_OVFLOW \
* VXGE_HAL_RING_T_CODE_BENIGN_OVFLOW
* #define VXGE_HAL_RING_RXD_T_CODE_ZERO_LEN_BUFF \
* VXGE_HAL_RING_T_CODE_ZERO_LEN_BUFF
* #define VXGE_HAL_RING_RXD_T_CODE_FRM_DROP \
* VXGE_HAL_RING_T_CODE_FRM_DROP
* #define VXGE_HAL_RING_RXD_T_CODE_UNUSED \
* VXGE_HAL_RING_T_CODE_UNUSED
* #define VXGE_HAL_RING_RXD_T_CODE_MULTI_ERR \
* VXGE_HAL_RING_T_CODE_MULTI_ERR
*
* #define VXGE_HAL_RING_RXD_SYN_GET(ctrl0) bVAL1(ctrl0, 16)
* #define VXGE_HAL_RING_RXD_SYN mBIT(16)
*
* #define VXGE_HAL_RING_RXD_IS_ICMP_GET(ctrl0) bVAL1(ctrl0, 17)
* #define VXGE_HAL_RING_RXD_IS_ICMP mBIT(17)
*
* #define VXGE_HAL_RING_RXD_RTH_SPDM_HIT_GET(ctrl0) bVAL1(ctrl0, 18)
* #define VXGE_HAL_RING_RXD_RTH_SPDM_HIT mBIT(18)
*
* #define VXGE_HAL_RING_RXD_RTH_IT_HIT_GET(ctrl0) bVAL1(ctrl0, 19)
* #define VXGE_HAL_RING_RXD_RTH_IT_HIT mBIT(19)
*
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_GET(ctrl0) bVAL4(ctrl0, 20)
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE(val) vBIT(val, 20, 4)
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_NONE \
* VXGE_HAL_RING_HASH_TYPE_NONE
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV4 \
* VXGE_HAL_RING_HASH_TYPE_TCP_IPV4
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV4 \
* VXGE_HAL_RING_HASH_TYPE_UDP_IPV4
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV4 \
* VXGE_HAL_RING_HASH_TYPE_IPV4
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV6 \
* VXGE_HAL_RING_HASH_TYPE_TCP_IPV6
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV6 \
* VXGE_HAL_RING_HASH_TYPE_UDP_IPV6
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV6 \
* VXGE_HAL_RING_HASH_TYPE_IPV6
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_TCP_IPV6_EX \
* VXGE_HAL_RING_HASH_TYPE_TCP_IPV6_EX
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_UDP_IPV6_EX \
* VXGE_HAL_RING_HASH_TYPE_UDP_IPV6_EX
* #define VXGE_HAL_RING_RXD_RTH_HASH_TYPE_IPV6_EX \
* VXGE_HAL_RING_HASH_TYPE_IPV6_EX
*
* #define VXGE_HAL_RING_RXD_IS_VLAN_GET(ctrl0) bVAL1(ctrl0, 24)
* #define VXGE_HAL_RING_RXD_IS_VLAN mBIT(24)
*
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_GET(ctrl0) bVAL2(ctrl0, 25)
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP(val) vBIT(val, 25, 2)
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_DIX VXGE_HAL_FRAME_TYPE_DIX
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_LLC VXGE_HAL_FRAME_TYPE_LLC
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_SNAP VXGE_HAL_FRAME_TYPE_SNAP
* #define VXGE_HAL_RING_RXD_ETHER_ENCAP_IPX VXGE_HAL_FRAME_TYPE_IPX
*
* #define VXGE_HAL_RING_RXD_IS_IPV4_GET(ctrl0) bVAL1(ctrl0, 27)
* #define VXGE_HAL_RING_RXD_IS_IPV4 mBIT(27)
*
* #define VXGE_HAL_RING_RXD_IS_IPV6_GET(ctrl0) bVAL1(ctrl0, 28)
* #define VXGE_HAL_RING_RXD_IS_IPV6 mBIT(28)
*
* #define VXGE_HAL_RING_RXD_IS_IPV_FRAG_GET(ctrl0) bVAL1(ctrl0, 29)
* #define VXGE_HAL_RING_RXD_IS_IPV_FRAG mBIT(29)
*
* #define VXGE_HAL_RING_RXD_IS_TCP_GET(ctrl0) bVAL1(ctrl0, 30)
* #define VXGE_HAL_RING_RXD_IS_TCP mBIT(30)
*
* #define VXGE_HAL_RING_RXD_IS_UDP_GET(ctrl0) bVAL1(ctrl0, 31)
* #define VXGE_HAL_RING_RXD_IS_UDP mBIT(31)
*
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_GET(ctrl0) bVAL5(ctrl0, 27)
* #define VXGE_HAL_RING_RXD_FRAME_PROTO(val) vBIT(val, 27, 5)
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_IPV4 VXGE_HAL_FRAME_PROTO_IPV4
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_IPV6 VXGE_HAL_FRAME_PROTO_IPV6
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_IP_FRAG \
* VXGE_HAL_FRAME_PROTO_IP_FRAG
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_TCP VXGE_HAL_FRAME_PROTO_TCP
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_UDP VXGE_HAL_FRAME_PROTO_UDP
* #define VXGE_HAL_RING_RXD_FRAME_PROTO_TCP_OR_UDP \
* (VXGE_HAL_FRAME_PROTO_TCP | VXGE_HAL_FRAME_PROTO_UDP)
*
* #define VXGE_HAL_RING_RXD_L3_CKSUM_GET(ctrl0) bVAL16(ctrl0, 32)
* #define VXGE_HAL_RING_RXD_L3_CKSUM(val) vBIT(val, 32, 16)
*
* #define VXGE_HAL_RING_RXD_L4_CKSUM_GET(ctrl0) bVAL16(ctrl0, 48)
* #define VXGE_HAL_RING_RXD_L4_CKSUM(val) vBIT(val, 48, 16)
*/
u64 control_1;
#define VXGE_HAL_RING_RXD_5_BUFFER0_SIZE_GET(ctrl1) bVAL14(ctrl1, 2)
#define VXGE_HAL_RING_RXD_5_BUFFER0_SIZE(val) vBIT(val, 2, 14)
#define VXGE_HAL_RING_RXD_5_BUFFER0_SIZE_MASK vBIT(0x3FFF, 2, 14)
#define VXGE_HAL_RING_RXD_5_BUFFER1_SIZE_GET(ctrl1) bVAL14(ctrl1, 18)
#define VXGE_HAL_RING_RXD_5_BUFFER1_SIZE(val) vBIT(val, 18, 14)
#define VXGE_HAL_RING_RXD_5_BUFFER1_SIZE_MASK vBIT(0x3FFF, 18, 14)
#define VXGE_HAL_RING_RXD_5_BUFFER2_SIZE_GET(ctrl1) bVAL14(ctrl1, 34)
#define VXGE_HAL_RING_RXD_5_BUFFER2_SIZE(val) vBIT(val, 34, 14)
#define VXGE_HAL_RING_RXD_5_BUFFER2_SIZE_MASK vBIT(0xFFFF, 34, 14)
/*
* The following bit fields are common in all the three buffer modes and are
* defined in vxge_hal_ring_rxd_1_t
* #define VXGE_HAL_RING_RXD_VLAN_TAG_GET(ctrl1) bVAL16(ctrl1, 48)
* #define VXGE_HAL_RING_RXD_VLAN_TAG(val) vBIT(val, 48, 16)
*/
u64 buffer0_ptr;
#define VXGE_HAL_RING_RXD_5_RTH_HASH_VALUE_GET(b0_ptr) bVAL32(b0_ptr, 32)
#define VXGE_HAL_RING_RXD_5_RTH_HASH_VALUE(val) vBIT(val, 32, 32)
u64 buffer1_ptr;
u64 buffer2_ptr;
u64 buffer3_ptr;
u64 buffer4_ptr;
} vxge_hal_ring_rxd_5_t;
/*
* function vxge_hal_ring_callback_f - Ring callback.
* @vpath_handle: Virtual Path whose Ring "containing" 1 or more completed
* descriptors.
* @rxdh: First completed descriptor.
* @rxd_priv: Pointer to per rxd space allocated
* @t_code: Transfer code, as per X3100 User Guide.
* Returned by HAL.
* @userdata: Opaque per-ring data specified at ring open
* time, via vxge_hal_vpath_open().
*
* ring completion callback (type declaration). A single per-ring
* callback is specified at virtual path open time, via
* vxge_hal_vpath_open().
* Typically gets called as part of the processing of the Interrupt
* Service Routine.
*
* ring callback gets called by HAL if, and only if, there is at least
* one new completion on a given ring . Upon processing the first @rxdh
* ULD is _supposed_ to continue consuming completions
* using - vxge_hal_ring_rxd_next_completed().
*
* Note that failure to process new completions in a timely fashion
* leads to VXGE_HAL_INF_OUT_OF_DESCRIPTORS condition.
*
* Non-zero @t_code means failure to process receive descriptor.
*
* In the "transmit" case the failure could happen, for instance, when the
* link is down, in which case X3100 completes the descriptor because it
* is not able to send the data out.
*
* For details please refer to X3100 User Guide.
*
* See also: vxge_hal_ring_rxd_next_completed(), vxge_hal_ring_rxd_term_f {}.
*/
typedef vxge_hal_status_e(*vxge_hal_ring_callback_f) (
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
void *rxd_priv,
u8 t_code,
void *userdata);
/*
* function vxge_hal_ring_rxd_init_f - Initialize descriptor callback.
* @vpath_handle: Virtual path whose ring "containing" the @rxdh descriptor.
* @rxdh: Descriptor.
* @rxd_priv: Pointer to per rxd space allocated
* @index: Index of the descriptor in the ring's set of descriptors.
* @userdata: Per-ring user data (a.k.a. context) specified at
* ring open time, via vxge_hal_vpath_open().
* @reopen: See vxge_hal_reopen_e {}.
*
* Initialize descriptor callback. Unless NULL is specified in the
* vxge_hal_ring_attr_t {} structure passed to vxge_hal_vpath_open()),
* HAL invokes the callback as part of the ring create in vxge_hal_vpath_open()
* implementation.
* The ULD is expected to fill in this descriptor with buffer(s)
* and control information.
*
* See also: vxge_hal_ring_attr_t {}, vxge_hal_ring_rxd_term_f {}.
*/
typedef vxge_hal_status_e(*vxge_hal_ring_rxd_init_f) (
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
void *rxd_priv,
u32 index,
void *userdata,
vxge_hal_reopen_e reopen);
/*
* function vxge_hal_ring_rxd_term_f - Terminate descriptor callback.
* @vpath_handle: Virtual path whose ring "containing" the @rxdh descriptor.
* @rxdh: First completed descriptor.
* @rxd_priv: Pointer to per rxd space allocated
* @state: One of the vxge_hal_rxd_state_e {} enumerated states.
* @userdata: Per-ring user data (a.k.a. context) specified at
* ring open time, via vxge_hal_vpath_open().
* @reopen: See vxge_hal_reopen_e {}.
*
* Terminate descriptor callback. Unless NULL is specified in the
* vxge_hal_ring_attr_t {} structure passed to vxge_hal_vpath_open()),
* HAL invokes the callback as part of closing the corresponding
* ring, prior to de-allocating the ring and associated data
* structures (including descriptors).
* ULD should utilize the callback to (for instance) unmap
* and free DMA data buffers associated with the posted (state =
* VXGE_HAL_RXD_STATE_POSTED) descriptors,
* as well as other relevant cleanup functions.
*
* See also: vxge_hal_ring_attr_t {}, vxge_hal_ring_rxd_init_f {}.
*/
typedef void (*vxge_hal_ring_rxd_term_f) (
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
void *rxd_priv,
vxge_hal_rxd_state_e state,
void *userdata,
vxge_hal_reopen_e reopen);
/*
* struct vxge_hal_ring_attr_t - Ring open "template".
* @callback: Ring completion callback. HAL invokes the callback when there
* are new completions on that ring. In many implementations
* the @callback executes in the hw interrupt context.
* @rxd_init: Ring's descriptor-initialize callback.
* See vxge_hal_ring_rxd_init_f {}.
* If not NULL, HAL invokes the callback when opening
* the ring.
* @rxd_term: Ring's descriptor-terminate callback. If not NULL,
* HAL invokes the callback when closing the corresponding ring.
* See also vxge_hal_ring_rxd_term_f {}.
* @userdata: User-defined "context" of _that_ ring. Passed back to the
* user as one of the @callback, @rxd_init, and @rxd_term arguments.
* @per_rxd_space: If specified (i.e., greater than zero): extra space
* reserved by HAL per each receive descriptor. Can be used to store,
* and retrieve on completion, information specific
* to the upper-layer.
*
* Ring open "template". User fills the structure with ring
* attributes and passes it to vxge_hal_vpath_open().
*/
typedef struct vxge_hal_ring_attr_t {
vxge_hal_ring_callback_f callback;
vxge_hal_ring_rxd_init_f rxd_init;
vxge_hal_ring_rxd_term_f rxd_term;
void *userdata;
u32 per_rxd_space;
} vxge_hal_ring_attr_t;
/*
* vxge_hal_ring_rxd_size_get - Get the size of ring descriptor.
* @buf_mode: Buffer mode (1, 3 or 5)
*
* This function returns the size of RxD for given buffer mode
*/
static inline u32
/* LINTED */
vxge_hal_ring_rxd_size_get(
u32 buf_mode)
{
return ((u32) (buf_mode == 1 ? sizeof(vxge_hal_ring_rxd_1_t) : \
(buf_mode == 3 ? sizeof(vxge_hal_ring_rxd_3_t) : \
sizeof(vxge_hal_ring_rxd_5_t))));
}
/*
* vxge_hal_ring_rxds_per_block_get - Get the number of rxds per block.
* @buf_mode: Buffer mode (1, 3 or 5)
*
* This function returns the number of RxD for RxD block for given buffer mode
*/
static inline u32
/* LINTED */
vxge_hal_ring_rxds_per_block_get(
u32 buf_mode)
{
return ((u32) ((VXGE_OS_HOST_PAGE_SIZE - 16) /
((buf_mode == 1) ? sizeof(vxge_hal_ring_rxd_1_t) :
((buf_mode == 3) ? sizeof(vxge_hal_ring_rxd_3_t) :
sizeof(vxge_hal_ring_rxd_5_t)))));
}
/*
* vxge_hal_ring_rxd_reserve - Reserve ring descriptor.
* @vpath_handle: virtual Path handle.
* @rxdh: Reserved descriptor. On success HAL fills this "out" parameter
* with a valid handle.
* @rxd_priv: Buffer to return the pointer to per rxd space allocated
*
* Reserve Rx descriptor for the subsequent filling-in (by upper layer
* driver (ULD)) and posting on the corresponding ring
* via vxge_hal_ring_rxd_post().
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_INF_OUT_OF_DESCRIPTORS - Currently no descriptors available.
*
*/
vxge_hal_status_e
vxge_hal_ring_rxd_reserve(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h *rxdh,
void **rxd_priv);
/*
* vxge_hal_ring_rxd_1b_set - Prepare 1-buffer-mode descriptor.
* @rxdh: Descriptor handle.
* @dma_pointer: DMA address of a single receive buffer this descriptor
* should carry. Note that by the time
* vxge_hal_ring_rxd_1b_set is called, the
* receive buffer should be already mapped
* to the corresponding X3100 device.
* @size: Size of the receive @dma_pointer buffer.
*
* Prepare 1-buffer-mode Rx descriptor for posting
* (via vxge_hal_ring_rxd_post()).
*
* This inline helper-function does not return any parameters and always
* succeeds.
*
*/
static inline
/* LINTED */
void vxge_hal_ring_rxd_1b_set(
vxge_hal_rxd_h rxdh,
dma_addr_t dma_pointer,
int size)
{
vxge_hal_ring_rxd_1_t *rxdp = (vxge_hal_ring_rxd_1_t *) rxdh;
rxdp->buffer0_ptr = dma_pointer;
rxdp->control_1 &= ~VXGE_HAL_RING_RXD_1_BUFFER0_SIZE_MASK;
rxdp->control_1 |= VXGE_HAL_RING_RXD_1_BUFFER0_SIZE(size);
}
/*
* vxge_hal_ring_rxd_3b_set - Prepare 3-buffer-mode descriptor.
* @rxdh: Descriptor handle.
* @dma_pointers: Array of DMA addresses. Contains exactly 3 receive buffers
* _this_ descriptor should carry. Note that by the time
* vxge_hal_ring_rxd_3b_set is called, the receive buffers should
* be mapped to the corresponding X3100 device.
* @sizes: Array of receive buffer sizes. Contains 3 sizes: one size per
* buffer from @dma_pointers.
*
* Prepare 3-buffer-mode Rx descriptor for posting (via
* vxge_hal_ring_rxd_post()).
* This inline helper-function does not return any parameters and always
* succeeds.
*
*/
static inline
/* LINTED */
void vxge_hal_ring_rxd_3b_set(
vxge_hal_rxd_h rxdh,
dma_addr_t dma_pointers[],
u32 sizes[])
{
vxge_hal_ring_rxd_3_t *rxdp = (vxge_hal_ring_rxd_3_t *) rxdh;
rxdp->buffer0_ptr = dma_pointers[0];
rxdp->control_1 &= (~VXGE_HAL_RING_RXD_3_BUFFER0_SIZE_MASK);
rxdp->control_1 |= VXGE_HAL_RING_RXD_3_BUFFER0_SIZE(sizes[0]);
rxdp->buffer1_ptr = dma_pointers[1];
rxdp->control_1 &= (~VXGE_HAL_RING_RXD_3_BUFFER1_SIZE_MASK);
rxdp->control_1 |= VXGE_HAL_RING_RXD_3_BUFFER1_SIZE(sizes[1]);
rxdp->buffer2_ptr = dma_pointers[2];
rxdp->control_1 &= (~VXGE_HAL_RING_RXD_3_BUFFER2_SIZE_MASK);
rxdp->control_1 |= VXGE_HAL_RING_RXD_3_BUFFER2_SIZE(sizes[2]);
}
/*
* vxge_hal_ring_rxd_5b_set - Prepare 5-buffer-mode descriptor.
* @rxdh: Descriptor handle.
* @dma_pointers: Array of DMA addresses. Contains exactly 5 receive buffers
* _this_ descriptor should carry. Note that by the time
* vxge_hal_ring_rxd_5b_set is called, the receive buffers should
* be mapped to the corresponding X3100 device.
* @sizes: Array of receive buffer sizes. Contains 5 sizes: one size per buffer
* from @dma_pointers.
*
* Prepare 5-buffer-mode Rx descriptor for posting
* (via vxge_hal_ring_rxd_post()).
* This inline helper-function does not return any
* values and always succeeds.
*
* See also: vxge_hal_ring_rxd_1b_set(), vxge_hal_ring_rxd_3b_set().
*/
static inline
/* LINTED */
void vxge_hal_ring_rxd_5b_set(
vxge_hal_rxd_h rxdh,
dma_addr_t dma_pointers[],
u32 sizes[])
{
vxge_hal_ring_rxd_5_t *rxdp = (vxge_hal_ring_rxd_5_t *) rxdh;
rxdp->buffer0_ptr = dma_pointers[0];
rxdp->control_1 &= (~VXGE_HAL_RING_RXD_5_BUFFER0_SIZE_MASK);
rxdp->control_1 |= VXGE_HAL_RING_RXD_5_BUFFER0_SIZE(sizes[0]);
rxdp->buffer1_ptr = dma_pointers[1];
rxdp->control_1 &= (~VXGE_HAL_RING_RXD_5_BUFFER1_SIZE_MASK);
rxdp->control_1 |= VXGE_HAL_RING_RXD_5_BUFFER1_SIZE(sizes[1]);
rxdp->buffer2_ptr = dma_pointers[2];
rxdp->control_1 &= (~VXGE_HAL_RING_RXD_5_BUFFER2_SIZE_MASK);
rxdp->control_1 |= VXGE_HAL_RING_RXD_5_BUFFER2_SIZE(sizes[2]);
rxdp->buffer3_ptr = dma_pointers[3];
rxdp->control_2 &= (~VXGE_HAL_RING_RXD_5_BUFFER3_SIZE_MASK);
rxdp->control_2 |= VXGE_HAL_RING_RXD_5_BUFFER3_SIZE(sizes[3]);
rxdp->buffer4_ptr = dma_pointers[4];
rxdp->control_2 &= (~VXGE_HAL_RING_RXD_5_BUFFER4_SIZE_MASK);
rxdp->control_2 |= VXGE_HAL_RING_RXD_5_BUFFER4_SIZE(sizes[4]);
}
/*
* vxge_hal_ring_rxd_pre_post - Prepare rxd and post
* @vpath_handle: virtual Path handle.
* @rxdh: Descriptor handle.
*
* This routine prepares a rxd and posts
*/
void
vxge_hal_ring_rxd_pre_post(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh);
/*
* vxge_hal_ring_rxd_post_post - Process rxd after post.
* @vpath_handle: virtual Path handle.
* @rxdh: Descriptor handle.
*
* Processes rxd after post
*/
void
vxge_hal_ring_rxd_post_post(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh);
/*
* vxge_hal_ring_rxd_post_post_db - Post Doorbell after posting the rxd(s).
* @vpath_handle: virtual Path handle.
*
* Post Doorbell after posting the rxd(s).
*/
void
vxge_hal_ring_rxd_post_post_db(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_ring_rxd_post_post_wmb - Process rxd after post with memory barrier
* @vpath_handle: virtual Path handle.
* @rxdh: Descriptor handle.
*
* Processes rxd after post with memory barrier.
*/
void
vxge_hal_ring_rxd_post_post_wmb(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh);
/*
* vxge_hal_ring_rxd_post - Post descriptor on the ring.
* @vpath_handle: virtual Path handle.
* @rxdh: Descriptor obtained via vxge_hal_ring_rxd_reserve().
*
* Post descriptor on the ring.
* Prior to posting the descriptor should be filled in accordance with
* Host/X3100 interface specification for a given service (LL, etc.).
*
*/
void
vxge_hal_ring_rxd_post(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh);
/*
* vxge_hal_ring_is_next_rxd_completed - Check if the next rxd is completed
* @vpath_handle: Virtual Path handle.
*
* Checks if the _next_ completed descriptor is in host memory
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS - No completed descriptors
* are currently available for processing.
*/
vxge_hal_status_e
vxge_hal_ring_is_next_rxd_completed(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_ring_rxd_next_completed - Get the _next_ completed descriptor.
* @vpath_handle: Virtual path handle.
* @rxdh: Descriptor handle. Returned by HAL.
* @rxd_priv: Buffer to return a pointer to the per rxd space allocated
* @t_code: Transfer code, as per X3100 User Guide,
* Receive Descriptor Format. Returned by HAL.
*
* Retrieve the _next_ completed descriptor.
* HAL uses ring callback (*vxge_hal_ring_callback_f) to notifiy
* upper-layer driver (ULD) of new completed descriptors. After that
* the ULD can use vxge_hal_ring_rxd_next_completed to retrieve the rest
* completions (the very first completion is passed by HAL via
* vxge_hal_ring_callback_f).
*
* Implementation-wise, the upper-layer driver is free to call
* vxge_hal_ring_rxd_next_completed either immediately from inside the
* ring callback, or in a deferred fashion and separate (from HAL)
* context.
*
* Non-zero @t_code means failure to fill-in receive buffer(s)
* of the descriptor.
* For instance, parity error detected during the data transfer.
* In this case X3100 will complete the descriptor and indicate
* for the host that the received data is not to be used.
* For details please refer to X3100 User Guide.
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS - No completed descriptors
* are currently available for processing.
*
* See also: vxge_hal_ring_callback_f {},
* vxge_hal_fifo_txdl_next_completed(), vxge_hal_status_e {}.
*/
vxge_hal_status_e
vxge_hal_ring_rxd_next_completed(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h *rxdh,
void **rxd_priv,
u8 *t_code);
/*
* vxge_hal_ring_handle_tcode - Handle transfer code.
* @vpath_handle: Virtual Path handle.
* @rxdh: Descriptor handle.
* @t_code: One of the enumerated (and documented in the X3100 user guide)
* "transfer codes".
*
* Handle descriptor's transfer code. The latter comes with each completed
* descriptor.
*
* Returns: one of the vxge_hal_status_e {} enumerated types.
* VXGE_HAL_OK - for success.
* VXGE_HAL_ERR_CRITICAL - when encounters critical error.
*/
vxge_hal_status_e
vxge_hal_ring_handle_tcode(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
u8 t_code);
/*
* vxge_hal_ring_rxd_1b_get - Get data from the completed 1-buf
* descriptor.
* @vpath_handle: Virtual Path handle.
* @rxdh: Descriptor handle.
* @dma_pointer: DMA address of a single receive buffer _this_ descriptor
* carries. Returned by HAL.
* @pkt_length: Length (in bytes) of the data in the buffer pointed by
* @dma_pointer. Returned by HAL.
*
* Retrieve protocol data from the completed 1-buffer-mode Rx descriptor.
* This inline helper-function uses completed descriptor to populate receive
* buffer pointer and other "out" parameters. The function always succeeds.
*
*/
static inline
/* LINTED */
void vxge_hal_ring_rxd_1b_get(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
dma_addr_t *dma_pointer,
u32 *pkt_length)
{
vxge_hal_ring_rxd_1_t *rxdp = (vxge_hal_ring_rxd_1_t *) rxdh;
*pkt_length =
(u32) VXGE_HAL_RING_RXD_1_BUFFER0_SIZE_GET(rxdp->control_1);
*dma_pointer = rxdp->buffer0_ptr;
}
/*
* vxge_hal_ring_rxd_3b_get - Get data from the completed 3-buf
* descriptor.
* @vpath_handle: Virtual Path handle.
* @rxdh: Descriptor handle.
* @dma_pointers: DMA addresses of the 3 receive buffers _this_ descriptor
* carries. The first two buffers contain ethernet and
* (IP + transport) headers. The 3rd buffer contains packet
* data.
* @sizes: Array of receive buffer sizes. Contains 3 sizes: one size per
* buffer from @dma_pointers. Returned by HAL.
*
* Retrieve protocol data from the completed 3-buffer-mode Rx descriptor.
* This inline helper-function uses completed descriptor to populate receive
* buffer pointer and other "out" parameters. The function always succeeds.
*
*/
static inline
/* LINTED */
void vxge_hal_ring_rxd_3b_get(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
dma_addr_t dma_pointers[],
u32 sizes[])
{
vxge_hal_ring_rxd_3_t *rxdp = (vxge_hal_ring_rxd_3_t *) rxdh;
dma_pointers[0] = rxdp->buffer0_ptr;
sizes[0] = (u32) VXGE_HAL_RING_RXD_3_BUFFER0_SIZE_GET(rxdp->control_1);
dma_pointers[1] = rxdp->buffer1_ptr;
sizes[1] = (u32) VXGE_HAL_RING_RXD_3_BUFFER1_SIZE_GET(rxdp->control_1);
dma_pointers[2] = rxdp->buffer2_ptr;
sizes[2] = (u32) VXGE_HAL_RING_RXD_3_BUFFER2_SIZE_GET(rxdp->control_1);
}
/*
* vxge_hal_ring_rxd_5b_get - Get data from the completed 5-buf descriptor.
* @vpath_handle: Virtual Path handle.
* @rxdh: Descriptor handle.
* @dma_pointers: DMA addresses of the 5 receive buffers _this_ descriptor
* carries. The first 4 buffers contains L2 (ethernet) through
* L5 headers. The 5th buffer contain received (applicaion)
* data. Returned by HAL.
* @sizes: Array of receive buffer sizes. Contains 5 sizes: one size per
* buffer from @dma_pointers. Returned by HAL.
*
* Retrieve protocol data from the completed 5-buffer-mode Rx descriptor.
* This inline helper-function uses completed descriptor to populate receive
* buffer pointer and other "out" parameters. The function always succeeds.
*
* See also: vxge_hal_ring_rxd_3b_get(), vxge_hal_ring_rxd_5b_get().
*/
static inline
/* LINTED */
void vxge_hal_ring_rxd_5b_get(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
dma_addr_t dma_pointers[],
int sizes[])
{
vxge_hal_ring_rxd_5_t *rxdp = (vxge_hal_ring_rxd_5_t *) rxdh;
dma_pointers[0] = rxdp->buffer0_ptr;
sizes[0] = (u32) VXGE_HAL_RING_RXD_5_BUFFER0_SIZE_GET(rxdp->control_1);
dma_pointers[1] = rxdp->buffer1_ptr;
sizes[1] = (u32) VXGE_HAL_RING_RXD_5_BUFFER1_SIZE_GET(rxdp->control_1);
dma_pointers[2] = rxdp->buffer2_ptr;
sizes[2] = (u32) VXGE_HAL_RING_RXD_5_BUFFER2_SIZE_GET(rxdp->control_1);
dma_pointers[3] = rxdp->buffer3_ptr;
sizes[3] = (u32) VXGE_HAL_RING_RXD_5_BUFFER3_SIZE_GET(rxdp->control_2);
dma_pointers[4] = rxdp->buffer4_ptr;
sizes[4] = (u32) VXGE_HAL_RING_RXD_5_BUFFER3_SIZE_GET(rxdp->control_2);
}
/*
* vxge_hal_ring_rxd_1b_info_get - Get extended information associated with
* a completed receive descriptor for 1b mode.
* @vpath_handle: Virtual Path handle.
* @rxdh: Descriptor handle.
* @rxd_info: Descriptor information
*
* Retrieve extended information associated with a completed receive descriptor.
*
*/
static inline
/* LINTED */
void vxge_hal_ring_rxd_1b_info_get(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
vxge_hal_ring_rxd_info_t *rxd_info)
{
vxge_hal_ring_rxd_1_t *rxdp = (vxge_hal_ring_rxd_1_t *) rxdh;
rxd_info->syn_flag =
(u32) VXGE_HAL_RING_RXD_SYN_GET(rxdp->control_0);
rxd_info->is_icmp =
(u32) VXGE_HAL_RING_RXD_IS_ICMP_GET(rxdp->control_0);
rxd_info->fast_path_eligible =
(u32) VXGE_HAL_RING_RXD_FAST_PATH_ELIGIBLE_GET(rxdp->control_0);
rxd_info->l3_cksum_valid =
(u32) VXGE_HAL_RING_RXD_L3_CKSUM_CORRECT_GET(rxdp->control_0);
rxd_info->l3_cksum =
(u32) VXGE_HAL_RING_RXD_L3_CKSUM_GET(rxdp->control_0);
rxd_info->l4_cksum_valid =
(u32) VXGE_HAL_RING_RXD_L4_CKSUM_CORRECT_GET(rxdp->control_0);
rxd_info->l4_cksum =
(u32) VXGE_HAL_RING_RXD_L4_CKSUM_GET(rxdp->control_0);
rxd_info->frame =
(u32) VXGE_HAL_RING_RXD_ETHER_ENCAP_GET(rxdp->control_0);
rxd_info->proto =
(u32) VXGE_HAL_RING_RXD_FRAME_PROTO_GET(rxdp->control_0);
rxd_info->is_vlan =
(u32) VXGE_HAL_RING_RXD_IS_VLAN_GET(rxdp->control_0);
rxd_info->vlan =
(u32) VXGE_HAL_RING_RXD_VLAN_TAG_GET(rxdp->control_1);
rxd_info->rth_bucket =
(u32) VXGE_HAL_RING_RXD_RTH_BUCKET_GET(rxdp->control_0);
rxd_info->rth_it_hit =
(u32) VXGE_HAL_RING_RXD_RTH_IT_HIT_GET(rxdp->control_0);
rxd_info->rth_spdm_hit =
(u32) VXGE_HAL_RING_RXD_RTH_SPDM_HIT_GET(rxdp->control_0);
rxd_info->rth_hash_type =
(u32) VXGE_HAL_RING_RXD_RTH_HASH_TYPE_GET(rxdp->control_0);
rxd_info->rth_value =
(u32) VXGE_HAL_RING_RXD_1_RTH_HASH_VAL_GET(rxdp->control_1);
}
/*
* vxge_hal_ring_rxd_3b_5b_info_get - Get extended information associated with
* a completed receive descriptor for 3b & 5b mode.
* @vpath_handle: Virtual Path handle.
* @rxdh: Descriptor handle.
* @rxd_info: Descriptor information
*
* Retrieve extended information associated with a completed receive descriptor.
*
*/
static inline
/* LINTED */
void vxge_hal_ring_rxd_3b_5b_info_get(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh,
vxge_hal_ring_rxd_info_t *rxd_info)
{
vxge_hal_ring_rxd_3_t *rxdp = (vxge_hal_ring_rxd_3_t *) rxdh;
rxd_info->syn_flag =
(u32) VXGE_HAL_RING_RXD_SYN_GET(rxdp->control_0);
rxd_info->is_icmp =
(u32) VXGE_HAL_RING_RXD_IS_ICMP_GET(rxdp->control_0);
rxd_info->fast_path_eligible =
(u32) VXGE_HAL_RING_RXD_FAST_PATH_ELIGIBLE_GET(rxdp->control_0);
rxd_info->l3_cksum_valid =
(u32) VXGE_HAL_RING_RXD_L3_CKSUM_CORRECT_GET(rxdp->control_0);
rxd_info->l3_cksum =
(u32) VXGE_HAL_RING_RXD_L3_CKSUM_GET(rxdp->control_0);
rxd_info->l4_cksum_valid =
(u32) VXGE_HAL_RING_RXD_L4_CKSUM_CORRECT_GET(rxdp->control_0);
rxd_info->l4_cksum =
(u32) VXGE_HAL_RING_RXD_L4_CKSUM_GET(rxdp->control_0);
rxd_info->frame =
(u32) VXGE_HAL_RING_RXD_ETHER_ENCAP_GET(rxdp->control_0);
rxd_info->proto =
(u32) VXGE_HAL_RING_RXD_FRAME_PROTO_GET(rxdp->control_0);
rxd_info->is_vlan =
(u32) VXGE_HAL_RING_RXD_IS_VLAN_GET(rxdp->control_0);
rxd_info->vlan =
(u32) VXGE_HAL_RING_RXD_VLAN_TAG_GET(rxdp->control_1);
rxd_info->rth_bucket =
(u32) VXGE_HAL_RING_RXD_RTH_BUCKET_GET(rxdp->control_0);
rxd_info->rth_it_hit =
(u32) VXGE_HAL_RING_RXD_RTH_IT_HIT_GET(rxdp->control_0);
rxd_info->rth_spdm_hit =
(u32) VXGE_HAL_RING_RXD_RTH_SPDM_HIT_GET(rxdp->control_0);
rxd_info->rth_hash_type =
(u32) VXGE_HAL_RING_RXD_RTH_HASH_TYPE_GET(rxdp->control_0);
rxd_info->rth_value = (u32) VXGE_HAL_RING_RXD_3_RTH_HASH_VALUE_GET(
rxdp->buffer0_ptr);
}
/*
* vxge_hal_device_is_privileged
* @host_type: host type.
* @func_id: function id.
*
*/
vxge_hal_status_e
vxge_hal_device_is_privileged(
u32 host_type,
u32 func_id);
/*
* vxge_hal_ring_rxd_private_get - Get ULD private per-descriptor data
* @vpath_handle: Virtual Path handle.
* @rxdh: Descriptor handle.
*
* Returns: private ULD info associated with the descriptor.
* ULD requests per-descriptor space via vxge_hal_ring_attr.
*
*/
void *
vxge_hal_ring_rxd_private_get(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh);
/*
* vxge_hal_ring_rxd_free - Free descriptor.
* @vpath_handle: Virtual Path handle.
* @rxdh: Descriptor handle.
*
* Free the reserved descriptor. This operation is "symmetrical" to
* vxge_hal_ring_rxd_reserve. The "free-ing" completes the descriptor's
* lifecycle.
*
* After free-ing (see vxge_hal_ring_rxd_free()) the descriptor again can
* be:
*
* - reserved (vxge_hal_ring_rxd_reserve);
*
* - posted (vxge_hal_ring_rxd_post);
*
* - completed (vxge_hal_ring_rxd_next_completed);
*
* - and recycled again (vxge_hal_ring_rxd_free).
*
* For alternative state transitions and more details please refer to
* the design doc.
*
*/
void
vxge_hal_ring_rxd_free(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rxd_h rxdh);
/*
* Fifo
*/
/*
* TX Descriptor
*/
/*
* enum vxge_hal_txdl_state_e - Descriptor (TXDL) state.
* @VXGE_HAL_TXDL_STATE_NONE: Invalid state.
* @VXGE_HAL_TXDL_STATE_AVAIL: Descriptor is available for reservation.
* @VXGE_HAL_TXDL_STATE_POSTED: Descriptor is posted for processing by the
* device.
* @VXGE_HAL_TXDL_STATE_FREED: Descriptor is free and can be reused for
* filling-in and posting later.
*
* X3100/HAL descriptor states.
*
*/
typedef enum vxge_hal_txdl_state_e {
VXGE_HAL_TXDL_STATE_NONE = 0,
VXGE_HAL_TXDL_STATE_AVAIL = 1,
VXGE_HAL_TXDL_STATE_POSTED = 2,
VXGE_HAL_TXDL_STATE_FREED = 3
} vxge_hal_txdl_state_e;
/*
* enum vxge_hal_fifo_tcode_e - tcodes used in fifo
* @VXGE_HAL_FIFO_T_CODE_OK: Transfer OK
* @VXGE_HAL_FIFO_T_CODE_PCI_READ_CORRUPT: PCI read transaction (either TxD or
* frame data) returned with corrupt data.
* @VXGE_HAL_FIFO_T_CODE_PCI_READ_FAIL:PCI read transaction was returned
* with no data.
* @VXGE_HAL_FIFO_T_CODE_INVALID_MSS: The host attempted to send either a
* frame or LSO MSS that was too long (>9800B).
* @VXGE_HAL_FIFO_T_CODE_LSO_ERROR: Error detected during TCP/UDP Large Send
* Offload operation, due to improper header template,
* unsupported protocol, etc.
* @VXGE_HAL_FIFO_T_CODE_UNUSED: Unused
* @VXGE_HAL_FIFO_T_CODE_MULTI_ERROR: Set to 1 by the adapter if multiple
* data buffer transfer errors are encountered (see below).
* Otherwise it is set to 0.
*
* These tcodes are returned in various API for TxD status
*/
typedef enum vxge_hal_fifo_tcode_e {
VXGE_HAL_FIFO_T_CODE_OK = 0x0,
VXGE_HAL_FIFO_T_CODE_PCI_READ_CORRUPT = 0x1,
VXGE_HAL_FIFO_T_CODE_PCI_READ_FAIL = 0x2,
VXGE_HAL_FIFO_T_CODE_INVALID_MSS = 0x3,
VXGE_HAL_FIFO_T_CODE_LSO_ERROR = 0x4,
VXGE_HAL_FIFO_T_CODE_UNUSED = 0x7,
VXGE_HAL_FIFO_T_CODE_MULTI_ERROR = 0x8
} vxge_hal_fifo_tcode_e;
/*
* enum vxge_hal_fifo_host_steer_e - Host steer type
* @VXGE_HAL_FIFO_HOST_STEER_NORMAL: Normal. Use Destination/MAC Address
* lookup to determine the transmit porte
* @VXGE_HAL_FIFO_HOST_STEER_PORT1: Send on physical Port1
* @VXGE_HAL_FIFO_HOST_STEER_PORT0: Send on physical Port0
* @VXGE_HAL_FIFO_HOST_STEER_BOTH: Send on both ports.
*
* Host steer type
*/
typedef enum vxge_hal_fifo_host_steer_e {
VXGE_HAL_FIFO_HOST_STEER_NORMAL = 0x0,
VXGE_HAL_FIFO_HOST_STEER_PORT1 = 0x1,
VXGE_HAL_FIFO_HOST_STEER_PORT0 = 0x2,
VXGE_HAL_FIFO_HOST_STEER_BOTH = 0x3
} vxge_hal_fifo_host_steer_e;
/*
* enum vxge_hal_fifo_gather_code_e - Gather codes used in fifo TxD
* @VXGE_HAL_FIFO_GATHER_CODE_FIRST: First TxDL
* @VXGE_HAL_FIFO_GATHER_CODE_MIDDLE: Middle TxDL
* @VXGE_HAL_FIFO_GATHER_CODE_LAST: Last TxDL
* @VXGE_HAL_FIFO_GATHER_CODE_FIRST_LAST: First and Last TxDL.
*
* These gather codes are used to indicate the position of a TxD in a TxD list
*/
typedef enum vxge_hal_fifo_gather_code_e {
VXGE_HAL_FIFO_GATHER_CODE_FIRST = 0x2,
VXGE_HAL_FIFO_GATHER_CODE_MIDDLE = 0x0,
VXGE_HAL_FIFO_GATHER_CODE_LAST = 0x1,
VXGE_HAL_FIFO_GATHER_CODE_FIRST_LAST = 0x3
} vxge_hal_fifo_gather_code_e;
/*
* enum vxge_hal_fifo_lso_frm_encap_e - LSO Frame Encapsulation
* @VXGE_HAL_FIFO_LSO_FRM_ENCAP_AUTO: auto mode (best guess)
* @VXGE_HAL_FIFO_LSO_FRM_ENCAP_LLC: LLC
* @VXGE_HAL_FIFO_LSO_FRM_ENCAP_SNAP: SNAP
* @VXGE_HAL_FIFO_LSO_FRM_ENCAP_DIX: DIX
*
* LSO Frame Encapsulation type
*/
typedef enum vxge_hal_fifo_lso_frm_encap_e {
VXGE_HAL_FIFO_LSO_FRM_ENCAP_AUTO = 0x0,
VXGE_HAL_FIFO_LSO_FRM_ENCAP_LLC = 0x1,
VXGE_HAL_FIFO_LSO_FRM_ENCAP_SNAP = 0x2,
VXGE_HAL_FIFO_LSO_FRM_ENCAP_DIX = 0x3
} vxge_hal_fifo_lso_frm_encap_e;
/*
* struct vxge_hal_fifo_txd_t - Transmit Descriptor
* @control_0: Bits 0 to 6 - Reserved.
* Bit 7 - List Ownership. This field should be initialized
* to '1' by the driver before the transmit list pointer is
* written to the adapter. This field will be set to '0' by the
* adapter once it has completed transmitting the frame or frames
* in the list. Note - This field is only valid in TxD0.
* Additionally, for multi-list sequences, the driver should not
* release any buffers until the ownership of the last list in the
* multi-list sequence has been returned to the host.
* Bits 8 to 11 - Reserved
* Bits 12 to 15 - Transfer_Code. This field is only valid in
* TxD0. It is used to describe the status of the transmit data
* buffer transfer. This field is always overwritten by the
* adapter, so this field may be initialized to any value.
* Bits 16 to 17 - Host steering. This field allows the host to
* override the selection of the physical transmit port.
* Attention:
* Normal sounds as if learned from the switch rather than from
* the aggregation algorythms.
* 00: Normal. Use Destination/MAC Address
* lookup to determine the transmit port.
* 01: Send on physical Port1.
* 10: Send on physical Port0.
* 11: Send on both ports.
* Bits 18 to 21 - Reserved
* Bits 22 to 23 - Gather_Code. This field is set by the host and
* is used to describe how individual buffers comprise a frame.
* 10: First descriptor of a frame.
* 00: Middle of a multi-descriptor frame.
* 01: Last descriptor of a frame.
* 11: First and last descriptor of a frame (the entire frame
* resides in a single buffer).
* For multi-descriptor frames, the only valid gather code sequence
* is {10, [00], 01}. In other words,the descriptors must be placed
* in the list in the correct order.
* Bits 24 to 27 - Reserved
* Bits 28 to 29 - LSO_Frm_Encap. LSO Frame Encapsulation
* definition. Only valid in TxD0. This field allows the host to
* indicate the Ethernet encapsulation of an outbound LSO packet.
* 00 - classic mode (best guess)
* 01 - LLC
* 10 - SNAP
* 11 - DIX
* If "classic mode" is selected, the adapter will attempt to
* decode the frame's Ethernet encapsulation by examining the L/T
* field as follows:
* <= 0x05DC LLC/SNAP encoding; must examine DSAP/SSAP to determine
* if packet is IPv4 or IPv6.
* 0x8870 Jumbo-SNAP encoding.
* 0x0800 IPv4 DIX encoding
* 0x86DD IPv6 DIX encoding
* others illegal encapsulation
* Bits 30 - LSO_ Flag. Large Send Offload (LSO) flag.
* Set to 1 to perform segmentation offload for TCP/UDP.
* This field is valid only in TxD0.
* Bits 31 to 33 - Reserved.
* Bits 34 to 47 - LSO_MSS. TCP/UDP LSO Maximum Segment Size
* This field is meaningful only when LSO_Control is non-zero.
* When LSO_Control is set to TCP_LSO, the single (possibly large)
* TCP segment described by this TxDL will be sent as a series of
* TCP segments each of which contains no more than LSO_MSS
* payload bytes.
* When LSO_Control is set to UDP_LSO, the single (possibly large)
* UDP datagram described by this TxDL will be sent as a series of
* UDP datagrams each of which contains no more than LSO_MSS
* payload bytes.
* All outgoing frames from this TxDL will have LSO_MSS bytes of
* UDP or TCP payload, with the exception of the last, which will
* have <= LSO_MSS bytes of payload.
* Bits 48 to 63 - Buffer_Size. Number of valid bytes in the
* buffer to be read by the adapter. This field is written by the
* host. A value of 0 is illegal.
* Bits 32 to 63 - This value is written by the adapter upon
* completion of a UDP or TCP LSO operation and indicates the
* number of UDP or TCP payload bytes that were transmitted.
* 0x0000 will bereturned for any non-LSO operation.
* @control_1: Bits 0 to 4 - Reserved.
* Bit 5 - Tx_CKO_IPv4 Set to a '1' to enable IPv4 header checksum
* offload. This field is only valid in the first TxD of a frame.
* Bit 6 - Tx_CKO_TCP Set to a '1' to enable TCP checksum offload.
* This field is only valid in the first TxD of a frame (the TxD's
* gather code must be 10 or 11). The driver should only set this
* Bit if it can guarantee that TCP is present.
* Bit 7 - Tx_CKO_UDP Set to a '1' to enable UDP checksum offload.
* This field is only valid in the first TxD of a frame (the TxD's
* gather code must be 10 or 11). The driver should only set this
* Bit if it can guarantee that UDP is present.
* Bits 8 to 14 - Reserved.
* Bit 15 - Tx_VLAN_Enable VLAN tag insertion flag. Set to a '1' to
* instruct the adapter to insert the VLAN tag specified by the
* Tx_VLAN_Tag field. This field is only valid in the first TxD of
* a frame.
* Bits 16 to 31 - Tx_VLAN_Tag. Variable portion of the VLAN tag
* to be inserted into the frame by the adapter(the first two bytes
* of a VLAN tag are always 0x8100).This field is only valid if the
* Tx_VLAN_Enable field is set to '1'.
* Bits 32 to 33 - Reserved.
* Bits 34 to 39 - Tx_Int_Number. Indicates which Tx interrupt
* number the frame associated with. This field is written by the
* host. It is only valid in the first TxD of a frame.
* Bits 40 to 42 - Reserved.
* Bit 43 - Set to 1 to exclude the frame from bandwidth metering
* functions. This field is valid only in the first TxD
* of a frame.
* Bits 44 to 45 - Reserved.
* Bit 46 - Tx_Int_Per_List Set to a '1' to instruct the adapter to
* generate an interrupt as soon as all of the frames in the list
* have been transmitted. In order to have per-frame interrupts,
* the driver should place a maximum of one frame per list. This
* field is only valid in the first TxD of a frame.
* Bit 47 - Tx_Int_Utilization Set to a '1' to instruct the adapter
* to count the frame toward the utilization interrupt specified in
* the Tx_Int_Number field. This field is only valid in the first
* TxD of a frame.
* Bits 48 to 63 - Reserved.
* @buffer_pointer: Buffer start address.
* @host_control: Host_Control.Opaque 64bit data stored by ULD inside the X3100
* descriptor prior to posting the latter on the fifo
* via vxge_hal_fifo_txdl_post().The %host_control is returned as is to
* the ULD with each completed descriptor.
*
* Transmit descriptor (TxD).Fifo descriptor contains configured number
* (list) of TxDs. * For more details please refer to X3100 User Guide,
* Section 5.4.2 "Transmit Descriptor (TxD) Format".
*/
typedef struct vxge_hal_fifo_txd_t {
u64 control_0;
#define VXGE_HAL_FIFO_TXD_LIST_OWN_GET(ctrl0) bVAL1(ctrl0, 7)
#define VXGE_HAL_FIFO_TXD_LIST_OWN_ADAPTER mBIT(7)
#define VXGE_HAL_FIFO_TXD_T_CODE_GET(ctrl0) bVAL4(ctrl0, 12)
#define VXGE_HAL_FIFO_TXD_T_CODE(val) vBIT(val, 12, 4)
#define VXGE_HAL_FIFO_TXD_T_CODE_OK VXGE_HAL_FIFO_T_CODE_OK
#define VXGE_HAL_FIFO_TXD_T_CODE_PCI_READ_CORRUPT \
VXGE_HAL_FIFO_T_CODE_PCI_READ_CORRUPT
#define VXGE_HAL_FIFO_TXD_T_CODE_PCI_READ_FAIL \
VXGE_HAL_FIFO_T_CODE_PCI_READ_FAIL
#define VXGE_HAL_FIFO_TXD_T_CODE_INVALID_MSS VXGE_HAL_FIFO_T_CODE_INVALID_MSS
#define VXGE_HAL_FIFO_TXD_T_CODE_LSO_ERROR VXGE_HAL_FIFO_T_CODE_LSO_ERROR
#define VXGE_HAL_FIFO_TXD_T_CODE_UNUSED VXGE_HAL_FIFO_T_CODE_UNUSED
#define VXGE_HAL_FIFO_TXD_T_CODE_MULTI_ERROR VXGE_HAL_FIFO_T_CODE_MULTI_ERROR
#define VXGE_HAL_FIFO_TXD_HOST_STEER_GET(ctrl0) bVAL2(ctrl0, 16)
#define VXGE_HAL_FIFO_TXD_HOST_STEER(val) vBIT(val, 16, 2)
#define VXGE_HAL_FIFO_TXD_HOST_STEER_NORMAL VXGE_HAL_FIFO_HOST_STEER_NORMAL
#define VXGE_HAL_FIFO_TXD_HOST_STEER_PORT1 VXGE_HAL_FIFO_HOST_STEER_PORT1
#define VXGE_HAL_FIFO_TXD_HOST_STEER_PORT0 VXGE_HAL_FIFO_HOST_STEER_PORT0
#define VXGE_HAL_FIFO_TXD_HOST_STEER_BOTH VXGE_HAL_FIFO_HOST_STEER_BOTH
#define VXGE_HAL_FIFO_TXD_GATHER_CODE_GET(ctrl0) bVAL2(ctrl0, 22)
#define VXGE_HAL_FIFO_TXD_GATHER_CODE(val) vBIT(val, 22, 2)
#define VXGE_HAL_FIFO_TXD_GATHER_CODE_FIRST VXGE_HAL_FIFO_GATHER_CODE_FIRST
#define VXGE_HAL_FIFO_TXD_GATHER_CODE_MIDDLE VXGE_HAL_FIFO_GATHER_CODE_MIDDLE
#define VXGE_HAL_FIFO_TXD_GATHER_CODE_LAST VXGE_HAL_FIFO_GATHER_CODE_LAST
#define VXGE_HAL_FIFO_TXD_GATHER_CODE_FIRST_LAST \
VXGE_HAL_FIFO_GATHER_CODE_FIRST_LAST
#define VXGE_HAL_FIFO_TXD_LSO_FRM_ENCAP_GET(ctrl0) bVAL2(ctrl0, 28)
#define VXGE_HAL_FIFO_TXD_LSO_FRM_ENCAP(val) vBIT(val, 28, 2)
#define VXGE_HAL_FIFO_TXD_LSO_FRM_ENCAP_AUTO VXGE_HAL_FIFO_LSO_FRM_ENCAP_AUTO
#define VXGE_HAL_FIFO_TXD_LSO_FRM_ENCAP_LLC VXGE_HAL_FIFO_LSO_FRM_ENCAP_LLC
#define VXGE_HAL_FIFO_TXD_LSO_FRM_ENCAP_SNAP VXGE_HAL_FIFO_LSO_FRM_ENCAP_SNAP
#define VXGE_HAL_FIFO_TXD_LSO_FRM_ENCAP_DIX VXGE_HAL_FIFO_LSO_FRM_ENCAP_DIX
#define VXGE_HAL_FIFO_TXD_LSO_FLAG_GET(ctrl0) bVAL1(ctrl0, 30)
#define VXGE_HAL_FIFO_TXD_LSO_FLAG mBIT(30)
#define VXGE_HAL_FIFO_TXD_LSO_MSS_GET(ctrl0) bVAL14(ctrl0, 34)
#define VXGE_HAL_FIFO_TXD_LSO_MSS(val) vBIT(val, 34, 14)
#define VXGE_HAL_FIFO_TXD_BUFFER_SIZE_GET(ctrl0) bVAL16(ctrl0, 48)
#define VXGE_HAL_FIFO_TXD_BUFFER_SIZE(val) vBIT(val, 48, 16)
#define VXGE_HAL_FIFO_TXD_LSO_BYTES_SENT_GET(ctrl0) bVAL32(ctrl0, 32)
#define VXGE_HAL_FIFO_TXD_LSO_BYTES_SENT(val) vBIT(val, 32, 32)
u64 control_1;
#define VXGE_HAL_FIFO_TXD_TX_CKO_IPV4_EN_GET(ctrl1) bVAL1(ctrl1, 5)
#define VXGE_HAL_FIFO_TXD_TX_CKO_IPV4_EN mBIT(5)
#define VXGE_HAL_FIFO_TXD_TX_CKO_TCP_EN_GET(ctrl1) bVAL1(ctrl1, 6)
#define VXGE_HAL_FIFO_TXD_TX_CKO_TCP_EN mBIT(6)
#define VXGE_HAL_FIFO_TXD_TX_CKO_UDP_EN_GET(ctrl1) bVAL1(ctrl1, 7)
#define VXGE_HAL_FIFO_TXD_TX_CKO_UDP_EN mBIT(7)
#define VXGE_HAL_FIFO_TXD_TX_CKO_CONTROL (mBIT(5)|mBIT(6)|mBIT(7))
#define VXGE_HAL_FIFO_TXD_VLAN_ENABLE_GET(ctrl1) bVAL1(ctrl1, 15)
#define VXGE_HAL_FIFO_TXD_VLAN_ENABLE mBIT(15)
#define VXGE_HAL_FIFO_TXD_VLAN_TAG_GET(ctrl1) bVAL16(ctrl1, 16)
#define VXGE_HAL_FIFO_TXD_VLAN_TAG(val) vBIT(val, 16, 16)
#define VXGE_HAL_FIFO_TXD_INT_NUMBER_GET(ctrl1) bVAL6(ctrl1, 34)
#define VXGE_HAL_FIFO_TXD_INT_NUMBER(val) vBIT(val, 34, 6)
#define VXGE_HAL_FIFO_TXD_NO_BW_LIMIT_GET(ctrl1) bVAL1(ctrl1, 43)
#define VXGE_HAL_FIFO_TXD_NO_BW_LIMIT mBIT(43)
#define VXGE_HAL_FIFO_TXD_INT_TYPE_PER_LIST_GET(ctrl1) bVAL1(ctrl1, 46)
#define VXGE_HAL_FIFO_TXD_INT_TYPE_PER_LIST mBIT(46)
#define VXGE_HAL_FIFO_TXD_INT_TYPE_UTILZ_GET(ctrl1) bVAL1(ctrl1, 47)
#define VXGE_HAL_FIFO_TXD_INT_TYPE_UTILZ mBIT(47)
u64 buffer_pointer;
u64 host_control;
} vxge_hal_fifo_txd_t;
typedef vxge_hal_fifo_txd_t *vxge_hal_fifo_txdl_t;
/*
* function vxge_hal_fifo_callback_f - FIFO callback.
* @vpath_handle: Virtual path whose Fifo "containing" 1 or more completed
* descriptors.
* @txdlh: First completed descriptor.
* @txdl_priv: Pointer to per txdl space allocated
* @t_code: Transfer code, as per X3100 User Guide.
* Returned by HAL.
* @host_control: Opaque 64bit data stored by ULD inside the X3100
* descriptor prior to posting the latter on the fifo
* via vxge_hal_fifo_txdl_post(). The @host_control is returned
* as is to the ULD with each completed descriptor.
* @userdata: Opaque per-fifo data specified at fifo open
* time, via vxge_hal_vpath_open().
*
* Fifo completion callback (type declaration). A single per-fifo
* callback is specified at fifo open time, via
* vxge_hal_vpath_open(). Typically gets called as part of the processing
* of the Interrupt Service Routine.
*
* Fifo callback gets called by HAL if, and only if, there is at least
* one new completion on a given fifo. Upon processing the first @txdlh ULD
* is _supposed_ to continue consuming completions using:
* - vxge_hal_fifo_txdl_next_completed()
*
* Note that failure to process new completions in a timely fashion
* leads to VXGE_HAL_INF_OUT_OF_DESCRIPTORS condition.
*
* Non-zero @t_code means failure to process transmit descriptor.
*
* In the "transmit" case the failure could happen, for instance, when the
* link is down, in which case X3100 completes the descriptor because it
* is not able to send the data out.
*
* For details please refer to X3100 User Guide.
*
* See also: vxge_hal_fifo_txdl_next_completed(), vxge_hal_fifo_txdl_term_f {}.
*/
typedef vxge_hal_status_e(*vxge_hal_fifo_callback_f) (
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
void *txdl_priv,
vxge_hal_fifo_tcode_e t_code,
void *userdata);
/*
* function vxge_hal_fifo_txdl_init_f - Initialize descriptor callback.
* @vpath_handle: Virtual path whose Fifo "containing" the @txdlh descriptor.
* @txdlh: Descriptor.
* @txdl_priv: Pointer to per txdl space allocated
* @index: Index of the descriptor in the fifo's set of descriptors.
* @userdata: Per-fifo user data (a.k.a. context) specified at
* fifo open time, via vxge_hal_vpath_open().
* @reopen: See vxge_hal_reopen_e {}.
*
* Initialize descriptor callback. Unless NULL is specified in the
* vxge_hal_fifo_attr_t {} structure passed to vxge_hal_vpath_open()),
* HAL invokes the callback as part of the vxge_hal_vpath_open()
* implementation.
* The ULD could use the callback to pre-set DMA mappings and/or alignment
* buffers.
*
* See also: vxge_hal_fifo_attr_t {}, vxge_hal_fifo_txdl_term_f {}.
*/
typedef vxge_hal_status_e(*vxge_hal_fifo_txdl_init_f) (
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
void *txdl_priv,
u32 index,
void *userdata,
vxge_hal_reopen_e reopen);
/*
* function vxge_hal_fifo_txdl_term_f - Terminate descriptor callback.
* @vpath_handle: Virtual path whose Fifo "containing" the @txdlh descriptor.
* @txdlh: First completed descriptor.
* @txdl_priv: Pointer to per txdl space allocated
* @state: One of the vxge_hal_txdl_state_e {} enumerated states.
* @userdata: Per-fifo user data (a.k.a. context) specified at
* fifo open time, via vxge_hal_vpath_open().
* @reopen: See vxge_hal_reopen_e {}.
*
* Terminate descriptor callback. Unless NULL is specified in the
* vxge_hal_fifo_attr_t {} structure passed to vxge_hal_vpath_open()),
* HAL invokes the callback as part of closing fifo, prior to
* de-allocating the ring and associated data structures
* (including descriptors).
* ULD should utilize the callback to (for instance) unmap
* and free DMA data buffers associated with the posted (state =
* VXGE_HAL_TXDL_STATE_POSTED) descriptors,
* as well as other relevant cleanup functions.
*
* See also: vxge_hal_fifo_attr_t {}, vxge_hal_fifo_txdl_init_f {}.
*/
typedef void (*vxge_hal_fifo_txdl_term_f) (
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
void *txdl_priv,
vxge_hal_txdl_state_e state,
void *userdata,
vxge_hal_reopen_e reopen);
/*
* struct vxge_hal_fifo_attr_t - Fifo open "template".
* @callback: Fifo completion callback. HAL invokes the callback when there
* are new completions on that fifo. In many implementations
* the @callback executes in the hw interrupt context.
* @txdl_init: Fifo's descriptor-initialize callback.
* See vxge_hal_fifo_txdl_init_f {}.
* If not NULL, HAL invokes the callback when opening
* the fifo via vxge_hal_vpath_open().
* @txdl_term: Fifo's descriptor-terminate callback. If not NULL,
* HAL invokes the callback when closing the corresponding fifo.
* See also vxge_hal_fifo_txdl_term_f {}.
* @userdata: User-defined "context" of _that_ fifo. Passed back to the
* user as one of the @callback, @txdl_init, and @txdl_term arguments.
* @per_txdl_space: If specified (i.e., greater than zero): extra space
* reserved by HAL per each transmit descriptor. Can be used to
* store, and retrieve on completion, information specific
* to the upper-layer.
*
* Fifo open "template". User fills the structure with fifo
* attributes and passes it to vxge_hal_vpath_open().
*/
typedef struct vxge_hal_fifo_attr_t {
vxge_hal_fifo_callback_f callback;
vxge_hal_fifo_txdl_init_f txdl_init;
vxge_hal_fifo_txdl_term_f txdl_term;
void *userdata;
u32 per_txdl_space;
} vxge_hal_fifo_attr_t;
/*
* vxge_hal_fifo_doorbell_reset - Resets the doorbell fifo
* @vpath_handle: Vpath Handle
*
* This function resets the doorbell fifo during if fifo error occurs
*/
vxge_hal_status_e
vxge_hal_fifo_doorbell_reset(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_fifo_txdl_reserve - Reserve fifo descriptor.
* @vpath_handle: virtual path handle.
* @txdlh: Reserved descriptor. On success HAL fills this "out" parameter
* with a valid handle.
* @txdl_priv: Buffer to return the pointer to per txdl space allocated
*
* Reserve a single TxDL (that is, fifo descriptor)
* for the subsequent filling-in by upper layerdriver (ULD))
* and posting on the corresponding fifo
* via vxge_hal_fifo_txdl_post().
*
* Note: it is the responsibility of ULD to reserve multiple descriptors
* for lengthy (e.g., LSO) transmit operation. A single fifo descriptor
* carries up to configured number (fifo.max_frags) of contiguous buffers.
*
* Returns: VXGE_HAL_OK - success;
* VXGE_HAL_INF_OUT_OF_DESCRIPTORS - Currently no descriptors available
*
*/
vxge_hal_status_e
vxge_hal_fifo_txdl_reserve(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h *txdlh,
void **txdl_priv);
/*
* vxge_hal_fifo_txdl_cksum_set_bits - Offload checksum.
* @txdlh: Descriptor handle.
* @cksum_bits: Specifies which checksums are to be offloaded: IPv4,
* and/or TCP and/or UDP.
*
* Ask X3100 to calculate IPv4 & transport checksums for _this_ transmit
* descriptor.
* This API is part of the preparation of the transmit descriptor for posting
* (via vxge_hal_fifo_txdl_post()). The related "preparation" APIs include
* vxge_hal_fifo_txdl_mss_set(), vxge_hal_fifo_txdl_buffer_set_aligned(),
* and vxge_hal_fifo_txdl_buffer_set().
* All these APIs fill in the fields of the fifo descriptor,
* in accordance with the X3100 specification.
*
*/
static inline
/* LINTED */
void vxge_hal_fifo_txdl_cksum_set_bits(
vxge_hal_txdl_h txdlh,
u64 cksum_bits)
{
vxge_hal_fifo_txd_t *txdp = (vxge_hal_fifo_txd_t *) txdlh;
txdp->control_1 |= cksum_bits;
}
/*
* vxge_hal_fifo_txdl_interrupt_type_set - Set the interrupt type for the txdl
* @txdlh: Descriptor handle.
* @interrupt_type: utiliz based interupt or List interrupt
*
* vxge_hal_fifo_txdl_interrupt_type_set is used to set the interrupt type for
* each xmit txdl dynamically
*/
static inline
/* LINTED */
void vxge_hal_fifo_txdl_interrupt_type_set(
vxge_hal_txdl_h txdlh,
u64 interrupt_type)
{
vxge_hal_fifo_txd_t *txdp = (vxge_hal_fifo_txd_t *) txdlh;
txdp->control_1 |= interrupt_type;
}
/*
* vxge_hal_fifo_txdl_lso_set - Set LSO Parameters.
* @txdlh: Descriptor handle.
* @encap: LSO Encapsulation
* @mss: MSS size for LSO.
*
* This API is part of the preparation of the transmit descriptor for posting
* (via vxge_hal_fifo_txdl_post()). The related "preparation" APIs include
* vxge_hal_fifo_txdl_buffer_set(), vxge_hal_fifo_txdl_buffer_set_aligned(),
* and vxge_hal_fifo_txdl_cksum_set_bits().
* All these APIs fill in the fields of the fifo descriptor,
* in accordance with the X3100 specification.
*
*/
static inline
/* LINTED */
void vxge_hal_fifo_txdl_lso_set(
vxge_hal_txdl_h txdlh,
u32 encap,
u32 mss)
{
vxge_hal_fifo_txd_t *txdp = (vxge_hal_fifo_txd_t *) txdlh;
txdp->control_0 |= VXGE_HAL_FIFO_TXD_LSO_FRM_ENCAP(encap) |
VXGE_HAL_FIFO_TXD_LSO_FLAG | VXGE_HAL_FIFO_TXD_LSO_MSS(mss);
}
/*
* vxge_hal_fifo_txdl_lso_bytes_sent - Get the lso bytes sent.
* @txdlh: Descriptor handle.
*
* Returns the lso bytes sent
*/
static inline
/* LINTED */
u32 vxge_hal_fifo_txdl_lso_bytes_sent(
vxge_hal_txdl_h txdlh)
{
vxge_hal_fifo_txd_t *txdp = (vxge_hal_fifo_txd_t *) txdlh;
return (u32) VXGE_HAL_FIFO_TXD_LSO_BYTES_SENT_GET(txdp->control_0);
}
/*
* vxge_hal_fifo_txdl_vlan_set - Set VLAN tag.
* @txdlh: Descriptor handle.
* @vlan_tag: 16bit VLAN tag.
*
* Insert VLAN tag into specified transmit descriptor.
* The actual insertion of the tag into outgoing frame is done by the hardware.
*/
static inline
/* LINTED */
void vxge_hal_fifo_txdl_vlan_set(
vxge_hal_txdl_h txdlh,
u16 vlan_tag)
{
vxge_hal_fifo_txd_t *txdp = (vxge_hal_fifo_txd_t *) txdlh;
txdp->control_1 |= VXGE_HAL_FIFO_TXD_VLAN_ENABLE;
txdp->control_1 |= VXGE_HAL_FIFO_TXD_VLAN_TAG(vlan_tag);
}
/*
* vxge_hal_fifo_txdl_buffer_set - Set transmit buffer pointer in the
* descriptor.
* @vpath_handle: virtual path handle.
* @txdlh: Descriptor handle.
* @frag_idx: Index of the data buffer in the caller's scatter-gather list¤
* (of buffers).
* @dma_pointer: DMA address of the data buffer referenced by @frag_idx.
* @size: Size of the data buffer (in bytes).
*
* This API is part of the preparation of the transmit descriptor for posting
* (via vxge_hal_fifo_txdl_post()). The related "preparation" APIs include
* vxge_hal_fifo_txdl_mss_set() and vxge_hal_fifo_txdl_cksum_set_bits().
* All three APIs fill in the fields of the fifo descriptor,
* in accordance with the X3100 specification.
*
*/
void
vxge_hal_fifo_txdl_buffer_set(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
u32 frag_idx,
dma_addr_t dma_pointer,
unsigned long size);
/*
* vxge_hal_fifo_txdl_buffer_set_aligned - Align transmit buffer and fill
* in fifo descriptor.
* @vpath_handle: Virtual path handle.
* @txdlh: Descriptor handle.
* @frag_idx: Index of the data buffer in the caller's scatter-gather list¤
* (of buffers).
* @vaddr: Virtual address of the data buffer.
* @dma_pointer: DMA address of the data buffer referenced by @frag_idx.
* @size: Size of the data buffer (in bytes).
* @misaligned_size: Size (in bytes) of the misaligned portion of the
* data buffer. Calculated by the caller, based on the platform/OS/other
* specific criteria, which is outside of HAL's domain. See notes below.
*
* This API is part of the transmit descriptor preparation for posting
* (via vxge_hal_fifo_txdl_post()). The related "preparation" APIs include
* vxge_hal_fifo_txdl_mss_set() and vxge_hal_fifo_txdl_cksum_set_bits().
* All three APIs fill in the fields of the fifo descriptor,
* in accordance with the X3100 specification.
* On the PCI-X based systems aligning transmit data typically provides better
* transmit performance. The typical alignment granularity: L2 cacheline size.
* However, HAL does not make assumptions in terms of the alignment granularity;
* this is specified via additional @misaligned_size parameter described above.
* Prior to calling vxge_hal_fifo_txdl_buffer_set_aligned(),
* ULD is supposed to check alignment of a given fragment/buffer. For this HAL
* provides a separate vxge_hal_check_alignment() API sufficient to cover
* most (but not all) possible alignment criteria.
* If the buffer appears to be aligned, the ULD calls
* vxge_hal_fifo_txdl_buffer_set().
* Otherwise, ULD calls vxge_hal_fifo_txdl_buffer_set_aligned().
*
* Note; This API is a "superset" of vxge_hal_fifo_txdl_buffer_set(). In
* addition to filling in the specified descriptor it aligns transmit data on
* the specified boundary.
* Note: Decision on whether to align or not to align a given contiguous
* transmit buffer is outside of HAL's domain. To this end ULD can use any
* programmable criteria, which can help to 1) boost transmit performance,
* and/or 2) provide a workaround for PCI bridge bugs, if any.
*
*/
vxge_hal_status_e
vxge_hal_fifo_txdl_buffer_set_aligned(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
u32 frag_idx,
void *vaddr,
dma_addr_t dma_pointer,
u32 size,
u32 misaligned_size);
/*
* vxge_hal_fifo_txdl_buffer_append - Append the contents of virtually
* contiguous data buffer to a single physically contiguous buffer.
* @vpath_handle: Virtual path handle.
* @txdlh: Descriptor handle.
* @vaddr: Virtual address of the data buffer.
* @size: Size of the data buffer (in bytes).
*
* This API is part of the transmit descriptor preparation for posting
* (via vxge_hal_fifo_txdl_post()).
* The main difference of this API wrt to the APIs
* vxge_hal_fifo_txdl_buffer_set_aligned() is that this API appends the
* contents of virtually contiguous data buffers received from
* upper layer into a single physically contiguous data buffer and the
* device will do a DMA from this buffer.
*
* See Also: vxge_hal_fifo_txdl_buffer_finalize(),
* vxge_hal_fifo_txdl_buffer_set(),
* vxge_hal_fifo_txdl_buffer_set_aligned().
*/
vxge_hal_status_e
vxge_hal_fifo_txdl_buffer_append(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
void *vaddr,
u32 size);
/*
* vxge_hal_fifo_txdl_buffer_finalize - Prepares a descriptor that contains the
* single physically contiguous buffer.
*
* @vpath_handle: Virtual path handle.
* @txdlh: Descriptor handle.
* @frag_idx: Index of the data buffer in the Txdl list.
*
* This API in conjuction with vxge_hal_fifo_txdl_buffer_append() prepares
* a descriptor that consists of a single physically contiguous buffer
* which inturn contains the contents of one or more virtually contiguous
* buffers received from the upper layer.
*
* See Also: vxge_hal_fifo_txdl_buffer_append().
*/
void
vxge_hal_fifo_txdl_buffer_finalize(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
u32 frag_idx);
/*
* vxge_hal_fifo_txdl_new_frame_set - Start the new packet by setting TXDL flags
* @vpath_handle: virtual path handle.
* @txdlh: Descriptor handle.
*
* This API is part of the preparation of the transmit descriptor for posting
* (via vxge_hal_fifo_txdl_post()). This api is used to mark the end of previous
* frame and start of a new frame.
*
*/
void
vxge_hal_fifo_txdl_new_frame_set(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
u32 tagged);
/*
* vxge_hal_fifo_txdl_post - Post descriptor on the fifo.
* @vpath_handle: Virtual path handle.
* @txdlh: Descriptor obtained via vxge_hal_fifo_txdl_reserve()
*
* Post descriptor on the fifo for transmission.
* Prior to posting the descriptor should be filled in accordance with
* Host/X3100 interface specification for a given service (LL, etc.).
*
*/
void
vxge_hal_fifo_txdl_post(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
u32 tagged);
/*
* vxge_hal_fifo_is_next_txdl_completed - Checks if the next txdl is completed
* @vpath_handle: Virtual path handle.
*/
vxge_hal_status_e
vxge_hal_fifo_is_next_txdl_completed(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_fifo_free_txdl_count_get - returns the number of txdls available
* in the fifo
* @vpath_handle: Virtual path handle.
*/
u32
vxge_hal_fifo_free_txdl_count_get(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_fifo_txdl_next_completed - Retrieve next completed descriptor.
* @vpath_handle: Virtual path handle.
* @txdlh: Descriptor handle. Returned by HAL.
* @txdl_priv: Buffer to return the pointer to per txdl space allocated
* @t_code: Transfer code, as per X3100 User Guide,
* Transmit Descriptor Format.
* Returned by HAL.
*
* Retrieve the _next_ completed descriptor.
* HAL uses fifo callback (*vxge_hal_fifo_callback_f) to notifiy
* upper-layer driver (ULD) of new completed descriptors. After that
* the ULD can use vxge_hal_fifo_txdl_next_completed to retrieve the rest
* completions (the very first completion is passed by HAL via
* vxge_hal_fifo_callback_f).
*
* Implementation-wise, the upper-layer driver is free to call
* vxge_hal_fifo_txdl_next_completed either immediately from inside the
* fifo callback, or in a deferred fashion and separate (from HAL)
* context.
*
* Non-zero @t_code means failure to process the descriptor.
* The failure could happen, for instance, when the link is
* down, in which case X3100 completes the descriptor because it
* is not able to send the data out.
*
* For details please refer to X3100 User Guide.
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_INF_NO_MORE_COMPLETED_DESCRIPTORS - No completed descriptors
* are currently available for processing.
*
*/
vxge_hal_status_e
vxge_hal_fifo_txdl_next_completed(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h *txdlh,
void **txdl_priv,
vxge_hal_fifo_tcode_e *t_code);
/*
* vxge_hal_fifo_handle_tcode - Handle transfer code.
* @vpath_handle: Virtual Path handle.
* @txdlh: Descriptor handle.
* @t_code: One of the enumerated (and documented in the X3100 user guide)
* "transfer codes".
*
* Handle descriptor's transfer code. The latter comes with each completed
* descriptor.
*
* Returns: one of the vxge_hal_status_e {} enumerated types.
* VXGE_HAL_OK - for success.
* VXGE_HAL_ERR_CRITICAL - when encounters critical error.
*/
vxge_hal_status_e
vxge_hal_fifo_handle_tcode(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh,
vxge_hal_fifo_tcode_e t_code);
/*
* vxge_hal_fifo_txdl_private_get - Retrieve per-descriptor private data.
* @vpath_handle: Virtual path handle.
* @txdlh: Descriptor handle.
*
* Retrieve per-descriptor private data.
* Note that ULD requests per-descriptor space via
* vxge_hal_fifo_attr_t passed to
* vxge_hal_vpath_open().
*
* Returns: private ULD data associated with the descriptor.
*/
void *
vxge_hal_fifo_txdl_private_get(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh);
/*
* vxge_hal_fifo_txdl_free - Free descriptor.
* @vpath_handle: Virtual path handle.
* @txdlh: Descriptor handle.
*
* Free the reserved descriptor. This operation is "symmetrical" to
* vxge_hal_fifo_txdl_reserve. The "free-ing" completes the descriptor's
* lifecycle.
*
* After free-ing (see vxge_hal_fifo_txdl_free()) the descriptor again can
* be:
*
* - reserved (vxge_hal_fifo_txdl_reserve);
*
* - posted (vxge_hal_fifo_txdl_post);
*
* - completed (vxge_hal_fifo_txdl_next_completed);
*
* - and recycled again (vxge_hal_fifo_txdl_free).
*
* For alternative state transitions and more details please refer to
* the design doc.
*
*/
void
vxge_hal_fifo_txdl_free(
vxge_hal_vpath_h vpath_handle,
vxge_hal_txdl_h txdlh);
/*
* Device
*/
/*
* enum vxge_hal_card_e - X3100 adapter type.
* @VXGE_HAL_CARD_UNKNOWN: Unknown device.
* @VXGE_HAL_CARD_TITAN: X3100 device.
*
* Enumerates X3100 adapter types.
*
* See also: vxge_hal_device_check_id().
*/
typedef enum vxge_hal_card_e {
VXGE_HAL_CARD_UNKNOWN = 0,
VXGE_HAL_CARD_TITAN_1 = 1,
VXGE_HAL_CARD_TITAN_1A = 2,
VXGE_HAL_CARD_TITAN_2 = 3
} vxge_hal_card_e;
/*
* struct vxge_hal_device_attr_t - Device memory spaces.
* @regh0: BAR0 mapped memory handle (Solaris), or simply PCI device @pdev
* (Linux and the rest.)
* @regh1: BAR1 mapped memory handle. Same comment as above.
* @regh2: BAR2 mapped memory handle. Same comment as above.
* @bar0: BAR0 virtual address.
* @bar1: BAR1 virtual address.
* @bar2: BAR2 virtual address.
* @irqh: IRQ handle (Solaris).
* @cfgh: Configuration space handle (Solaris), or PCI device @pdev (Linux).
* @pdev: PCI device object.
*
* Device memory spaces. Includes configuration, BAR0, BAR1, etc. per device
* mapped memories. Also, includes a pointer to OS-specific PCI device object.
*/
typedef struct vxge_hal_device_attr_t {
pci_reg_h regh0;
pci_reg_h regh1;
pci_reg_h regh2;
u8 *bar0;
u8 *bar1;
u8 *bar2;
pci_irq_h irqh;
pci_cfg_h cfgh;
pci_dev_h pdev;
} vxge_hal_device_attr_t;
/*
* enum vxge_hal_device_link_state_e - Link state enumeration.
* @VXGE_HAL_LINK_NONE: Invalid link state.
* @VXGE_HAL_LINK_DOWN: Link is down.
* @VXGE_HAL_LINK_UP: Link is up.
*
*/
typedef enum vxge_hal_device_link_state_e {
VXGE_HAL_LINK_NONE,
VXGE_HAL_LINK_DOWN,
VXGE_HAL_LINK_UP
} vxge_hal_device_link_state_e;
/*
* enum vxge_hal_device_data_rate_e - Data rate enumeration.
* @VXGE_HAL_DATA_RATE_UNKNOWN: Unknown .
* @VXGE_HAL_DATA_RATE_1G: 1G.
* @VXGE_HAL_DATA_RATE_10G: 10G.
*
*/
typedef enum vxge_hal_device_data_rate_e {
VXGE_HAL_DATA_RATE_UNKNOWN,
VXGE_HAL_DATA_RATE_1G,
VXGE_HAL_DATA_RATE_10G
} vxge_hal_device_data_rate_e;
/*
* enum vxge_hal_device_lag_mode_e - X3100 adapter lag mode
* @VXGE_HAL_DEVICE_LAG_MODE_UNKNOWN: Unknown mode.
* @VXGE_HAL_DEVICE_LAG_MODE_HW_LACP: Hardware Link Aggregation.
* @VXGE_HAL_DEVICE_LAG_MODE_ACTIVE_PASSIVE: Active Passive.
* @VXGE_HAL_DEVICE_LAG_MODE_SINGLE_PORT: Single Port.
* @VXGE_HAL_DEVICE_LAG_MODE_DUAL_PORT: Dual Port.
* @VXGE_HAL_DEVICE_LAG_MODE_DISABLED: Disabled.
*
* Enumerates X3100 adapter lag modes.
*
*/
typedef enum vxge_hal_device_lag_mode_e {
VXGE_HAL_DEVICE_LAG_MODE_UNKNOWN = 0,
VXGE_HAL_DEVICE_LAG_MODE_HW_LACP,
VXGE_HAL_DEVICE_LAG_MODE_ACTIVE_PASSIVE,
VXGE_HAL_DEVICE_LAG_MODE_SINGLE_PORT,
VXGE_HAL_DEVICE_LAG_MODE_DUAL_PORT,
VXGE_HAL_DEVICE_LAG_MODE_DISABLED
} vxge_hal_device_lag_mode_e;
/*
* enum vxge_hal_pci_e_signalling_rate_e - PCI-E Lane signalling rate
* @VXGE_HAL_PCI_E_SIGNALLING_RATE_2_5GB: PCI-E signalling rate 2.5 GB
* @VXGE_HAL_PCI_E_SIGNALLING_RATE_5GB: PCI-E signalling rate 5 GB
* @VXGE_HAL_PCI_E_SIGNALLING_RATE_UNKNOWN: Unrecognized PCI bus frequency
*
* PCI-E Lane signalling rate
*/
typedef enum vxge_hal_pci_e_signalling_rate_e {
VXGE_HAL_PCI_E_SIGNALLING_RATE_2_5GB = 1,
VXGE_HAL_PCI_E_SIGNALLING_RATE_5GB = 2,
VXGE_HAL_PCI_E_SIGNALLING_RATE_UNKNOWN = 0
} vxge_hal_pci_e_signalling_rate_e;
/*
* enum vxge_hal_pci_e_link_width_e - PCI-E Link width enumeration.
* @VXGE_HAL_PCI_E_LINK_WIDTH_X1: 1 Lane.
* @VXGE_HAL_PCI_E_LINK_WIDTH_X2: 2 Lane.
* @VXGE_HAL_PCI_E_LINK_WIDTH_X4: 4 Lane.
* @VXGE_HAL_PCI_E_LINK_WIDTH_X8: 8 Lane.
* @VXGE_HAL_PCI_E_LINK_WIDTH_X12: 12 Lane.
* @VXGE_HAL_PCI_E_LINK_WIDTH_X16: 16 Lane.
* @VXGE_HAL_PCI_E_LINK_WIDTH_X32: 32 Lane.
* @VXGE_HAL_PCI_E_LINK_WIDTH_UNKNOWN: Unknown
*
* PCI-E Link width enumeration.
*/
typedef enum vxge_hal_pci_e_link_width_e {
VXGE_HAL_PCI_E_LINK_WIDTH_X1 = 1,
VXGE_HAL_PCI_E_LINK_WIDTH_X2 = 2,
VXGE_HAL_PCI_E_LINK_WIDTH_X4 = 4,
VXGE_HAL_PCI_E_LINK_WIDTH_X8 = 8,
VXGE_HAL_PCI_E_LINK_WIDTH_X12 = 12,
VXGE_HAL_PCI_E_LINK_WIDTH_X16 = 16,
VXGE_HAL_PCI_E_LINK_WIDTH_X32 = 32,
VXGE_HAL_PCI_E_LINK_WIDTH_UNKNOWN = 0
} vxge_hal_pci_e_link_width_e;
#define VXGE_HAL_DEVICE_STATS_SW_INFO_NOT_TRAFFIC_INTR(hldev) \
((vxge_hal_device_t *)hldev)->not_traffic_intr_cnt++
#define VXGE_HAL_DEVICE_STATS_SW_INFO_TRAFFIC_INTR(hldev) \
((vxge_hal_device_t *)hldev)->traffic_intr_cnt++
/*
* struct vxge_hal_device_t - Hal device object
* @magic: Magic Number
* @device_id: PCI Device Id of the adapter
* @revision: PCI Device major revision
* @upper_layer_data: Private data set by LL driver
* @signalling_rate: PCI-E signalling rate
* @link_width: see vxge_hal_pci_e_link_width_e {}
* @regh0: BAR0 mapped memory handle (Solaris), or simply PCI device @pdev
* (Linux and the rest.)
* @regh1: BAR1 mapped memory handle. Same comment as above.
* @regh2: BAR2 mapped memory handle. Same comment as above.
* @bar0: BAR0 virtual address.
* @bar1: BAR1 virtual address.
* @bar2: BAR2 virtual address.
* @irqh: IRQ handle
* @cfgh: Configuration space handle
* @pdev: Physical device handle
* @config: Confguration passed by the LL driver at initialization
* @is_initialized: Flag to specify if device is initialized
* @msix_enabled: Flag to indicate if msix is enabled
* @terminating: Flag to specify if the device is terminating
* @link_state: Link state
* @data_rate: Data rate
* @not_traffic_intr_cnt: Number of times the host was interrupted
* without new completions.
* "Non-traffic interrupt counter".
* @traffic_intr_cnt: Number of traffic interrupts for the device.
* @debug_module_mask: Debug module mask
* @debug_level: Debug Level
*
* HAL device object. Represents Titan adapter
*/
typedef struct vxge_hal_device_t {
u32 magic;
#define VXGE_HAL_DEVICE_MAGIC 0x12345678
#define VXGE_HAL_DEVICE_DEAD 0xDEADDEAD
u16 device_id;
u16 revision;
void *upper_layer_data;
vxge_hal_pci_e_signalling_rate_e signalling_rate;
vxge_hal_pci_e_link_width_e link_width;
pci_reg_h regh0;
pci_reg_h regh1;
pci_reg_h regh2;
u8 *bar0;
u8 *bar1;
u8 *bar2;
pci_irq_h irqh;
pci_cfg_h cfgh;
pci_dev_h pdev;
vxge_hal_device_config_t config;
volatile u32 is_initialized;
volatile u32 msix_enabled;
volatile u32 terminating;
volatile vxge_hal_device_link_state_e link_state;
volatile vxge_hal_device_data_rate_e data_rate;
volatile u32 not_traffic_intr_cnt;
volatile u32 traffic_intr_cnt;
u32 debug_module_mask;
u32 debug_level;
} vxge_hal_device_t;
/*
* struct vxge_hal_device_date_t - Date Format
* @day: Day
* @month: Month
* @year: Year
* @date: Date in string format
*
* Structure for returning date
*/
typedef struct vxge_hal_device_date_t {
u32 day;
u32 month;
u32 year;
char date[16];
} vxge_hal_device_date_t;
/*
* struct vxge_hal_device_version_t - Version Format
* @major: Major Version
* @minor: Minor Version
* @build: Build Number
* @version: Version in string format
*
* Structure for returning version
*/
typedef struct vxge_hal_device_version_t {
u32 major;
u32 minor;
u32 build;
char version[32];
} vxge_hal_device_version_t;
/*
* struct vxge_hal_device_pmd_info_t - PMD Information
* @type: PMD Type
* @vendor: Vender name
* @part_num: PMD Part Number
* @ser_num: PMD Serial Number
*
* Structure for returning PMD info
*/
typedef struct vxge_hal_device_pmd_info_t {
u32 type;
#define VXGE_HAL_DEVICE_PMD_TYPE_UNKNOWN 0
#define VXGE_HAL_DEVICE_PMD_TYPE_10G_SR 1
#define VXGE_HAL_DEVICE_PMD_TYPE_10G_LR 2
#define VXGE_HAL_DEVICE_PMD_TYPE_10G_LRM 3
#define VXGE_HAL_DEVICE_PMD_TYPE_10G_DIRECT 4
#define VXGE_HAL_DEVICE_PMD_TYPE_10G_CX4 5
#define VXGE_HAL_DEVICE_PMD_TYPE_10G_BASE_T 6
#define VXGE_HAL_DEVICE_PMD_TYPE_10G_OTHER 7
#define VXGE_HAL_DEVICE_PMD_TYPE_1G_SX 8
#define VXGE_HAL_DEVICE_PMD_TYPE_1G_LX 9
#define VXGE_HAL_DEVICE_PMD_TYPE_1G_CX 10
#define VXGE_HAL_DEVICE_PMD_TYPE_1G_DIRECT 11
#define VXGE_HAL_DEVICE_PMD_TYPE_1G_CX4 12
#define VXGE_HAL_DEVICE_PMD_TYPE_1G_BASE_T 13
#define VXGE_HAL_DEVICE_PMD_TYPE_1G_OTHER 14
u32 unused;
char vendor[24];
char part_num[24];
char ser_num[24];
} vxge_hal_device_pmd_info_t;
/*
* struct vxge_hal_device_hw_info_t - Device information
* @host_type: Host Type
* @function_mode: PCI Function Mode
* @func_id: Function Id
* @vpath_mask: vpath bit mask
* @fw_version: Firmware version
* @fw_date: Firmware Date
* @flash_version: Firmware version
* @flash_date: Firmware Date
* @serial_number: Card Serial Number
* @part_number: Card Part Number
* @product_description: Card Product Description
* @unused: For Solaris alignment purpose
* @ports: Number of ports present
* @pmd_port0: Port 0 PMD Info
* @pmd_port1: Port 1 PMD Info
* @mac_addrs: Mac addresses for each vpath
* @mac_addr_masks: Mac address masks for each vpath
*
* Returns the vpath mask that has the bits set for each vpath allocated
* for the driver and teh first mac addresse for each vpath
*/
typedef struct vxge_hal_device_hw_info_t {
u32 host_type;
#define VXGE_HAL_NO_MR_NO_SR_NORMAL_FUNCTION 0
#define VXGE_HAL_MR_NO_SR_VH0_BASE_FUNCTION 1
#define VXGE_HAL_NO_MR_SR_VH0_FUNCTION0 2
#define VXGE_HAL_NO_MR_SR_VH0_VIRTUAL_FUNCTION 3
#define VXGE_HAL_MR_SR_VH0_INVALID_CONFIG 4
#define VXGE_HAL_SR_VH_FUNCTION0 5
#define VXGE_HAL_SR_VH_VIRTUAL_FUNCTION 6
#define VXGE_HAL_VH_NORMAL_FUNCTION 7
u64 function_mode;
u32 func_id;
u64 vpath_mask;
vxge_hal_device_version_t fw_version;
vxge_hal_device_date_t fw_date;
vxge_hal_device_version_t flash_version;
vxge_hal_device_date_t flash_date;
u8 serial_number[24];
u8 part_number[24];
u8 product_description[72];
u32 unused;
u32 ports;
vxge_hal_device_pmd_info_t pmd_port0;
vxge_hal_device_pmd_info_t pmd_port1;
macaddr_t mac_addrs[VXGE_HAL_MAX_VIRTUAL_PATHS];
macaddr_t mac_addr_masks[VXGE_HAL_MAX_VIRTUAL_PATHS];
} vxge_hal_device_hw_info_t;
/*
* vxge_hal_device_hw_info_get - Get the hw information
* @pdev: PCI device object.
* @regh0: BAR0 mapped memory handle (Solaris), or simply PCI device @pdev
* (Linux and the rest.)
* @bar0: Address of BAR0 in PCI config
* @hw_info: Buffer to return vxge_hal_device_hw_info_t {} structure
*
* Returns the vpath mask that has the bits set for each vpath allocated
* for the driver, FW version information and the first mac addresse for
* each vpath
*/
vxge_hal_status_e
vxge_hal_device_hw_info_get(
pci_dev_h pdev,
pci_reg_h regh0,
u8 *bar0,
vxge_hal_device_hw_info_t *hw_info);
/*
* vxge_hal_device_config_default_get - Initialize device config with defaults.
* @device_config: Configuration structure to be initialized,
* For the X3100 configuration "knobs" please
* refer to vxge_hal_device_config_t and X3100
* User Guide.
*
* Initialize X3100 device config with default values.
*
* See also: vxge_hal_device_initialize(), vxge_hal_device_terminate(),
* vxge_hal_status_e {} vxge_hal_device_attr_t {}.
*/
vxge_hal_status_e
vxge_hal_device_config_default_get(
vxge_hal_device_config_t *device_config);
/*
* vxge_hal_device_initialize - Initialize X3100 device.
* @devh: Buffer to return HAL device handle.
* @attr: pointer to vxge_hal_device_attr_t structure
* @device_config: Configuration to be _applied_ to the device,
* For the X3100 configuration "knobs" please refer to
* vxge_hal_device_config_t and X3100 User Guide.
*
* Initialize X3100 device. Note that all the arguments of this public API
* are 'IN', except @hldev. Upper-layer driver (ULD) cooperates with
* OS to find new X3100 device, locate its PCI and memory spaces.
*
* When done, the ULD allocates sizeof(vxge_hal_device_t) bytes for HAL
* to enable the latter to perform X3100 hardware initialization.
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_ERR_DRIVER_NOT_INITIALIZED - Driver is not initialized.
* VXGE_HAL_ERR_BAD_DEVICE_CONFIG - Device configuration params are not
* valid.
* VXGE_HAL_ERR_OUT_OF_MEMORY - Memory allocation failed.
* VXGE_HAL_ERR_BAD_SUBSYSTEM_ID - Device subsystem id is invalid.
* VXGE_HAL_ERR_INVALID_MAC_ADDRESS - Device mac address in not valid.
* VXGE_HAL_INF_MEM_STROBE_CMD_EXECUTING - Failed to retrieve the mac
* address within the time(timeout) or TTI/RTI initialization failed.
* VXGE_HAL_ERR_SWAPPER_CTRL - Failed to configure swapper control.
*
* See also: vxge_hal_device_terminate(), vxge_hal_status_e {}
* vxge_hal_device_attr_t {}.
*/
vxge_hal_status_e
vxge_hal_device_initialize(
vxge_hal_device_h *devh,
vxge_hal_device_attr_t *attr,
vxge_hal_device_config_t *device_config);
/*
* vxge_hal_device_check_id - Verify device ID.
* @devh: HAL device handle.
*
* Verify device ID.
* Returns: one of the vxge_hal_card_e {} enumerated types.
* See also: vxge_hal_card_e {}.
*/
static inline
/* LINTED */
vxge_hal_card_e vxge_hal_device_check_id(
vxge_hal_device_h devh)
{
vxge_hal_device_t *hldev = (vxge_hal_device_t *) devh;
switch (hldev->device_id) {
case VXGE_PCI_DEVICE_ID_TITAN_1:
if (hldev->revision == VXGE_PCI_REVISION_TITAN_1)
return (VXGE_HAL_CARD_TITAN_1);
else if (hldev->revision == VXGE_PCI_REVISION_TITAN_1A)
return (VXGE_HAL_CARD_TITAN_1A);
else
break;
case VXGE_PCI_DEVICE_ID_TITAN_2:
if (hldev->revision == VXGE_PCI_REVISION_TITAN_2)
return (VXGE_HAL_CARD_TITAN_2);
else
break;
default:
break;
}
return (VXGE_HAL_CARD_UNKNOWN);
}
/*
* vxge_hal_device_revision_get - Get Device revision number.
* @devh: HAL device handle.
*
* Returns: Device revision number
*/
static inline
/* LINTED */
u32 vxge_hal_device_revision_get(
vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->revision);
}
/*
* vxge_hal_device_pciconfig_get - Read the content of given address
* in pci config space.
* @devh: Device handle.
* @offset: Configuration address(offset)to read from
* @length: Length of the data (1, 2 or 4 bytes)
* @val: Pointer to a buffer to return the content of the address
*
* Read from the pci config space.
*
*/
vxge_hal_status_e
vxge_hal_device_pciconfig_get(
vxge_hal_device_h devh,
u32 offset,
u32 length,
void *val);
/*
* vxge_hal_device_bar0_get - Get BAR0 mapped address.
* @devh: HAL device handle.
*
* Returns: BAR0 address of the specified device.
*/
static inline
/* LINTED */
u8 *vxge_hal_device_bar0_get(
vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->bar0);
}
/*
* vxge_hal_device_bar1_get - Get BAR1 mapped address.
* @devh: HAL device handle.
*
* Returns: BAR1 address of the specified device.
*/
static inline
/* LINTED */
u8 *vxge_hal_device_bar1_get(
vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->bar1);
}
/*
* vxge_hal_device_bar2_get - Get BAR2 mapped address.
* @devh: HAL device handle.
*
* Returns: BAR2 address of the specified device.
*/
static inline
/* LINTED */
u8 *vxge_hal_device_bar2_get(
vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->bar2);
}
/*
* vxge_hal_device_bar0_set - Set BAR0 mapped address.
* @devh: HAL device handle.
* @bar0: BAR0 mapped address.
* * Set BAR0 address in the HAL device object.
*/
static inline
/* LINTED */
void
vxge_hal_device_bar0_set(
vxge_hal_device_h devh,
u8 *bar0)
{
((vxge_hal_device_t *) devh)->bar0 = bar0;
}
/*
* vxge_hal_device_bar1_set - Set BAR1 mapped address.
* @devh: HAL device handle.
* @bar1: BAR1 mapped address.
*
* Set BAR1 address in the HAL Device Object.
*/
static inline
/* LINTED */
void
vxge_hal_device_bar1_set(
vxge_hal_device_h devh,
u8 *bar1)
{
((vxge_hal_device_t *) devh)->bar1 = bar1;
}
/*
* vxge_hal_device_bar2_set - Set BAR2 mapped address.
* @devh: HAL device handle.
* @bar2: BAR2 mapped address.
*
* Set BAR2 address in the HAL Device Object.
*/
static inline
/* LINTED */
void
vxge_hal_device_bar2_set(
vxge_hal_device_h devh,
u8 *bar2)
{
((vxge_hal_device_t *) devh)->bar2 = bar2;
}
/*
* vxge_hal_device_enable - Enable device.
* @devh: HAL device handle.
*
* Enable the specified device: bring up the link/interface.
*
*/
vxge_hal_status_e
vxge_hal_device_enable(
vxge_hal_device_h devh);
/*
* vxge_hal_device_disable - Disable X3100 adapter.
* @devh: HAL device handle.
*
* Disable this device. To gracefully reset the adapter, the host should:
*
* - call vxge_hal_device_disable();
*
* - call vxge_hal_device_intr_disable();
*
* - do some work (error recovery, change mtu, reset, etc);
*
* - call vxge_hal_device_enable();
*
* - call vxge_hal_device_intr_enable().
*
* Note: Disabling the device does _not_ include disabling of interrupts.
* After disabling the device stops receiving new frames but those frames
* that were already in the pipe will keep coming for some few milliseconds.
*
*
*/
vxge_hal_status_e
vxge_hal_device_disable(
vxge_hal_device_h devh);
/*
* vxge_hal_device_pci_info_get - Get PCI bus informations such as width,
* frequency, and mode from previously stored values.
* @devh: HAL device handle.
* @signalling_rate: pointer to a variable of enumerated type
* vxge_hal_pci_e_signalling_rate_e {}.
* @link_width: pointer to a variable of enumerated type
* vxge_hal_pci_e_link_width_e {}.
*
* Get pci-e signalling rate and link width.
*
* Returns: one of the vxge_hal_status_e {} enumerated types.
* VXGE_HAL_OK - for success.
* VXGE_HAL_ERR_INVALID_DEVICE - for invalid device handle.
*/
static inline
/* LINTED */
vxge_hal_status_e vxge_hal_device_pci_info_get(
vxge_hal_device_h devh,
vxge_hal_pci_e_signalling_rate_e *signalling_rate,
vxge_hal_pci_e_link_width_e *link_width)
{
vxge_hal_device_t *hldev = (vxge_hal_device_t *) devh;
if (!hldev || !hldev->is_initialized ||
(hldev->magic != VXGE_HAL_DEVICE_MAGIC)) {
return (VXGE_HAL_ERR_INVALID_DEVICE);
}
*signalling_rate = hldev->signalling_rate;
*link_width = hldev->link_width;
return (VXGE_HAL_OK);
}
/*
* vxge_hal_device_link_state_test - Test the link state.
* @devh: HAL device handle.
*
* Test link state.
* Returns: link state.
*/
vxge_hal_device_link_state_e
vxge_hal_device_link_state_test(
vxge_hal_device_h devh);
/*
* vxge_hal_device_link_state_get - Get link state.
* @devh: HAL device handle.
*
* Get link state.
* Returns: link state.
*/
static inline
/* LINTED */
vxge_hal_device_link_state_e vxge_hal_device_link_state_get(
vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->link_state);
}
/*
* vxge_hal_device_link_state_poll - Poll for the link state.
* @devh: HAL device handle.
*
* Get link state.
* Returns: link state.
*/
vxge_hal_device_link_state_e
vxge_hal_device_link_state_poll(
vxge_hal_device_h devh);
/*
* vxge_hal_device_data_rate_get - Get data rate.
* @devh: HAL device handle.
*
* Get data rate.
* Returns: data rate(1G or 10G).
*/
static inline
/* LINTED */
vxge_hal_device_data_rate_e vxge_hal_device_data_rate_get(
vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->data_rate);
}
/*
* vxge_hal_device_data_rate_poll - Poll for the data rate.
* @devh: HAL device handle.
*
* Get data rate.
* Returns: data rate.
*/
vxge_hal_device_data_rate_e
vxge_hal_device_data_rate_poll(
vxge_hal_device_h devh);
/*
* vxge_hal_device_lag_mode_get - Get Current LAG Mode
* @devh: HAL device handle.
*
* Get Current LAG Mode
*/
vxge_hal_device_lag_mode_e
vxge_hal_device_lag_mode_get(
vxge_hal_device_h devh);
/*
* vxge_hal_device_reset - Reset device.
* @devh: HAL device handle.
*
* Soft-reset the device, reset the device stats except reset_cnt.
*
* After reset is done, will try to re-initialize HW.
*
* Returns: VXGE_HAL_PENDING - successfully sent reset to device.
* VXGE_HAL_ERR_DEVICE_NOT_INITIALIZED - Device is not initialized.
* VXGE_HAL_ERR_RESET_FAILED - Reset failed.
*
*/
vxge_hal_status_e
vxge_hal_device_reset(
vxge_hal_device_h devh);
/*
* vxge_hal_device_reset_poll - Poll the device for reset complete.
* @devh: HAL device handle.
*
* Poll the device for reset complete
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_ERR_DEVICE_NOT_INITIALIZED - Device is not initialized.
* VXGE_HAL_ERR_RESET_FAILED - Reset failed.
*
* See also: vxge_hal_status_e {}.
*/
vxge_hal_status_e
vxge_hal_device_reset_poll(vxge_hal_device_h devh);
/*
* vxge_hal_device_mrpcim_reset_poll - Poll the device for mrpcim reset
* complete.
* @devh: HAL device handle.
*
* Poll the device for mrpcim reset complete
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_ERR_DEVICE_NOT_INITIALIZED - Device is not initialized.
* VXGE_HAL_ERR_RESET_FAILED - Reset failed.
* VXGE_HAL_ERR_MANAGER_NOT_FOUND - MRPCIM/SRPCIM manager not found
* VXGE_HAL_ERR_TIME_OUT - Device Reset timed out
*
* See also: vxge_hal_status_e {}.
*/
vxge_hal_status_e
vxge_hal_device_mrpcim_reset_poll(vxge_hal_device_h devh);
/*
* vxge_hal_device_terminating - Mark the device as 'terminating'.
* @devh: HAL device handle.
*
* Mark the device as 'terminating', going to terminate. Can be used
* to serialize termination with other running processes/contexts.
*
* See also: vxge_hal_device_terminate().
*/
static inline void
/* LINTED */
vxge_hal_device_terminating(vxge_hal_device_h devh)
{
((vxge_hal_device_t *) devh)->terminating = 1;
}
/*
* vxge_hal_device_terminate - Terminate X3100 device.
* @devh: HAL device handle.
*
* Terminate HAL device.
*
* See also: vxge_hal_device_initialize().
*/
void
vxge_hal_device_terminate(
vxge_hal_device_h devh);
/*
* vxge_hal_device_private_set - Set ULD context.
* @devh: HAL device handle.
* @data: pointer to ULD context
*
* Use HAL device to set upper-layer driver (ULD) context.
*
* See also: vxge_hal_device_private_get()
*/
static inline
/* LINTED */
void vxge_hal_device_private_set(
vxge_hal_device_h devh,
void *data)
{
((vxge_hal_device_t *) devh)->upper_layer_data = data;
}
/*
* vxge_hal_device_private_get - Get ULD context.
* @devh: HAL device handle.
*
* Use HAL device to set upper-layer driver (ULD) context.
*
* See also: vxge_hal_device_private_get()
*/
static inline
/* LINTED */
void *vxge_hal_device_private_get(
vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->upper_layer_data);
}
/*
* vxge_hal_device_status - Check whether X3100 hardware is ready for
* operation.
* @devh: HAL device handle.
* @hw_status: X3100 status register. Returned by HAL.
*
* Check whether X3100 hardware is ready for operation.
* The checking includes TDMA, RDMA, PFC, PIC, MC_DRAM, and the rest
* hardware functional blocks.
*
* Returns: VXGE_HAL_OK if the device is ready for operation. Otherwise
* returns VXGE_HAL_FAIL. Also, fills in adapter status (in @hw_status).
*
* See also: vxge_hal_status_e {}.
* Usage: See ex_open {}.
*/
vxge_hal_status_e
vxge_hal_device_status(vxge_hal_device_h devh, u64 *hw_status);
/*
* vxge_hal_device_is_slot_freeze
* @devh: the device
*
* Returns non-zero if the slot is freezed.
* The determination is made based on the adapter_status
* register which will never give all FFs, unless PCI read
* cannot go through.
*/
int
vxge_hal_device_is_slot_freeze(vxge_hal_device_h devh);
/*
* vxge_hal_device_is_traffic_interrupt
* @reason: The reason returned by the vxge)hal_device_begin_irq
* @vp_id: Id of vpath for which to check the interrupt
*
* Returns non-zero if traffic interrupt raised, 0 otherwise
*/
static inline u64
/* LINTED */
vxge_hal_device_is_traffic_interrupt(u64 reason, u32 vp_id)
{
return (reason & mBIT(vp_id + 3));
}
/*
* vxge_hal_device_intr_enable - Enable X3100 interrupts.
* @devh: HAL device handle.
* @op: One of the vxge_hal_device_intr_e enumerated values specifying
* the type(s) of interrupts to enable.
*
* Enable X3100 interrupts. The function is to be executed the last in
* X3100 initialization sequence.
*
* See also: vxge_hal_device_intr_disable()
*/
void
vxge_hal_device_intr_enable(
vxge_hal_device_h devh);
/*
* vxge_hal_device_intr_disable - Disable X3100 interrupts.
* @devh: HAL device handle.
* @op: One of the vxge_hal_device_intr_e enumerated values specifying
* the type(s) of interrupts to disable.
*
* Disable X3100 interrupts.
*
* See also: vxge_hal_device_intr_enable()
*/
void
vxge_hal_device_intr_disable(
vxge_hal_device_h devh);
/*
* vxge_hal_device_mask_all - Mask all device interrupts.
* @devh: HAL device handle.
*
* Mask all device interrupts.
*
* See also: vxge_hal_device_unmask_all()
*/
void
vxge_hal_device_mask_all(
vxge_hal_device_h devh);
/*
* vxge_hal_device_unmask_all - Unmask all device interrupts.
* @devh: HAL device handle.
*
* Unmask all device interrupts.
*
* See also: vxge_hal_device_mask_all()
*/
void
vxge_hal_device_unmask_all(
vxge_hal_device_h devh);
/*
* vxge_hal_device_begin_irq - Begin IRQ processing.
* @devh: HAL device handle.
* @skip_alarms: Do not clear the alarms
* @reason: "Reason" for the interrupt, the value of X3100's
* general_int_status register.
*
* The function performs two actions, It first checks whether (shared IRQ) the
* interrupt was raised by the device. Next, it masks the device interrupts.
*
* Note:
* vxge_hal_device_begin_irq() does not flush MMIO writes through the
* bridge. Therefore, two back-to-back interrupts are potentially possible.
* It is the responsibility of the ULD to make sure that only one
* vxge_hal_device_continue_irq() runs at a time.
*
* Returns: 0, if the interrupt is not "ours" (note that in this case the
* device remain enabled).
* Otherwise, vxge_hal_device_begin_irq() returns 64bit general adapter
* status.
* See also: vxge_hal_device_handle_irq()
*/
vxge_hal_status_e
vxge_hal_device_begin_irq(
vxge_hal_device_h devh,
u32 skip_alarms,
u64 *reason);
/*
* vxge_hal_device_continue_irq - Continue handling IRQ: process all
* completed descriptors.
* @devh: HAL device handle.
*
* Process completed descriptors and unmask the device interrupts.
*
* The vxge_hal_device_continue_irq() walks all open virtual paths
* and calls upper-layer driver (ULD) via supplied completion
* callback.
*
* Note that the vxge_hal_device_continue_irq is part of the _fast_ path.
* To optimize the processing, the function does _not_ check for
* errors and alarms.
*
* Returns: VXGE_HAL_OK.
*
* See also: vxge_hal_device_handle_irq(),
* vxge_hal_ring_rxd_next_completed(),
* vxge_hal_fifo_txdl_next_completed(), vxge_hal_ring_callback_f {},
* vxge_hal_fifo_callback_f {}.
*/
vxge_hal_status_e
vxge_hal_device_continue_irq(
vxge_hal_device_h devh);
/*
* vxge_hal_device_handle_irq - Handle device IRQ.
* @devh: HAL device handle.
* @skip_alarms: Do not clear the alarms
*
* Perform the complete handling of the line interrupt. The function
* performs two calls.
* First it uses vxge_hal_device_begin_irq() to check the reason for
* the interrupt and mask the device interrupts.
* Second, it calls vxge_hal_device_continue_irq() to process all
* completed descriptors and re-enable the interrupts.
*
* Returns: VXGE_HAL_OK - success;
* VXGE_HAL_ERR_WRONG_IRQ - (shared) IRQ produced by other device.
*
* See also: vxge_hal_device_begin_irq(), vxge_hal_device_continue_irq().
*/
vxge_hal_status_e
vxge_hal_device_handle_irq(
vxge_hal_device_h devh,
u32 skip_alarms);
/*
* vxge_hal_device_mask_tx - Mask Tx interrupts.
* @devh: HAL device.
*
* Mask Tx device interrupts.
*
* See also: vxge_hal_device_unmask_tx(), vxge_hal_device_mask_rx(),
* vxge_hal_device_clear_tx().
*/
void
vxge_hal_device_mask_tx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_clear_tx - Acknowledge (that is, clear) the
* condition that has caused the TX interrupt.
* @devh: HAL device.
*
* Acknowledge (that is, clear) the condition that has caused
* the Tx interrupt.
* See also: vxge_hal_device_begin_irq(), vxge_hal_device_continue_irq(),
* vxge_hal_device_clear_rx(), vxge_hal_device_mask_tx().
*/
void
vxge_hal_device_clear_tx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_unmask_tx - Unmask Tx interrupts.
* @devh: HAL device.
*
* Unmask Tx device interrupts.
*
* See also: vxge_hal_device_mask_tx(), vxge_hal_device_clear_tx().
*/
void
vxge_hal_device_unmask_tx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_mask_rx - Mask Rx interrupts.
* @devh: HAL device.
*
* Mask Rx device interrupts.
*
* See also: vxge_hal_device_unmask_rx(), vxge_hal_device_mask_tx(),
* vxge_hal_device_clear_rx().
*/
void
vxge_hal_device_mask_rx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_clear_rx - Acknowledge (that is, clear) the
* condition that has caused the RX interrupt.
* @devh: HAL device.
*
* Acknowledge (that is, clear) the condition that has caused
* the Rx interrupt.
* See also: vxge_hal_device_begin_irq(), vxge_hal_device_continue_irq(),
* vxge_hal_device_clear_tx(), vxge_hal_device_mask_rx().
*/
void
vxge_hal_device_clear_rx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_unmask_rx - Unmask Rx interrupts.
* @devh: HAL device.
*
* Unmask Rx device interrupts.
*
* See also: vxge_hal_device_mask_rx(), vxge_hal_device_clear_rx().
*/
void
vxge_hal_device_unmask_rx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_mask_tx_rx - Mask Tx and Rx interrupts.
* @devh: HAL device.
*
* Mask Tx and Rx device interrupts.
*
* See also: vxge_hal_device_unmask_tx_rx(), vxge_hal_device_clear_tx_rx().
*/
void
vxge_hal_device_mask_tx_rx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_clear_tx_rx - Acknowledge (that is, clear) the
* condition that has caused the Tx and RX interrupt.
* @devh: HAL device.
*
* Acknowledge (that is, clear) the condition that has caused
* the Tx and Rx interrupt.
* See also: vxge_hal_device_begin_irq(), vxge_hal_device_continue_irq(),
* vxge_hal_device_mask_tx_rx(), vxge_hal_device_unmask_tx_rx().
*/
void
vxge_hal_device_clear_tx_rx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_unmask_tx_rx - Unmask Tx and Rx interrupts.
* @devh: HAL device.
*
* Unmask Tx and Rx device interrupts.
*
* See also: vxge_hal_device_mask_tx_rx(), vxge_hal_device_clear_tx_rx().
*/
void
vxge_hal_device_unmask_tx_rx(
vxge_hal_device_h devh);
/*
* vxge_hal_device_msix_mode - Is MSIX enabled?
* @devh: HAL device handle.
*
* Returns 0 if MSIX is enabled for the specified device,
* non-zero otherwise.
*/
static inline int
/* LINTED */
vxge_hal_device_msix_mode(vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->msix_enabled);
}
#if defined(VXGE_TRACE_INTO_CIRCULAR_ARR)
/*
* vxge_hal_device_trace_write - Write the trace from the given buffer into
* circular trace buffer
* @devh: HAL device handle.
* @trace_buf: Buffer containing the trace.
* @trace_len: Length of the trace in the buffer
*
* Writes the trace from the given buffer into the circular trace buffer
*
*/
void
vxge_hal_device_trace_write(vxge_hal_device_h devh,
u8 *trace_buf,
u32 trace_len);
/*
* vxge_hal_device_trace_dump - Dump the trace buffer.
* @devh: HAL device handle.
*
* Dump the trace buffer contents.
*/
void
vxge_hal_device_trace_dump(vxge_hal_device_h devh);
/*
* vxge_hal_device_trace_read - Read trace buffer contents.
* @devh: HAL device handle.
* @buffer: Buffer to store the trace buffer contents.
* @buf_size: Size of the buffer.
* @read_length: Size of the valid data in the buffer.
*
* Read HAL trace buffer contents starting from the offset
* upto the size of the buffer or till EOF is reached.
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_EOF_TRACE_BUF - No more data in the trace buffer.
*
*/
vxge_hal_status_e
vxge_hal_device_trace_read(vxge_hal_device_h devh,
char *buffer,
unsigned buf_size,
unsigned *read_length);
#endif
/*
* vxge_hal_device_debug_set - Set the debug module, level and timestamp
* @devh: Hal device object
* @level: Debug level as defined in enum vxge_debug_level_e
* @mask: An or value of component masks as defined in vxge_debug.h
*
* This routine is used to dynamically change the debug output
*/
void
vxge_hal_device_debug_set(
vxge_hal_device_h devh,
vxge_debug_level_e level,
u32 mask);
/*
* vxge_hal_device_debug_level_get - Get the debug level
* @devh: Hal device object
*
* This routine returns the current debug level set
*/
static inline u32
/* LINTED */
vxge_hal_device_debug_level_get(vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->debug_level);
}
/*
* vxge_hal_device_debug_mask_get - Get the debug mask
* @devh: Hal device object
*
* This routine returns the current debug mask set
*/
static inline u32
/* LINTED */
vxge_hal_device_debug_mask_get(vxge_hal_device_h devh)
{
return (((vxge_hal_device_t *) devh)->debug_module_mask);
}
/*
* vxge_hal_device_flick_link_led - Flick (blink) link LED.
* @devh: HAL device handle.
* @port : Port number 0, or 1
* @on_off: TRUE if flickering to be on, FALSE to be off
*
* Flicker the link LED.
*/
vxge_hal_status_e
vxge_hal_device_flick_link_led(
vxge_hal_device_h devh,
u32 port,
u32 on_off);
/*
* vxge_hal_device_getpause_data -Pause frame frame generation and reception.
* @devh: HAL device handle.
* @port : Port number 0, 1, or 2
* @tx : A field to return the pause generation capability of the NIC.
* @rx : A field to return the pause reception capability of the NIC.
*
* Returns the Pause frame generation and reception capability of the NIC.
* Return value:
* status
*/
vxge_hal_status_e
vxge_hal_device_getpause_data(
vxge_hal_device_h devh,
u32 port,
u32 *tx,
u32 *rx);
/*
* Privileged operations
*/
/*
* enum vxge_hal_pcie_function_mode_e - PCIE Function modes
* @VXGE_HAL_PCIE_FUNC_MODE_SF1_VP17: Single Function
* - 1 function with 17 VPATHs
* @VXGE_HAL_PCIE_FUNC_MODE_MF8_VP2: Multi Function
* - 8 functions with 2 VPATHs per function
* @VXGE_HAL_PCIE_FUNC_MODE_SR17_VP1: SRIOV
* - 17 VFs with 1 VPATH per VF
* @VXGE_HAL_PCIE_FUNC_MODE_MR17_VP1: MRIOV
* - 17 Virtual Hierarchies, 1 Path/Function/Hierarchy
* @VXGE_HAL_PCIE_FUNC_MODE_MR8_VP2: MRIOV
* - 8 Virtual Hierarchies, 2 Path/Function/Hierarchy
* @VXGE_HAL_PCIE_FUNC_MODE_MF17_VP1: Multi Function
* - 17 functions, 1 Path/Function (PCIe ARI)
* @VXGE_HAL_PCIE_FUNC_MODE_SR8_VP2: SRIOV
* - 1 PF, 7 VF, 2 Paths/Function
* @VXGE_HAL_PCIE_FUNC_MODE_SR4_VP4: SRIOV
* - 1 PF, 3 VF, 4 Paths/Function
* @VXGE_HAL_PCIE_FUNC_MODE_MF2_VP8: Multi Function
* - 2 functions, 8 Paths/Function (funcs 2-7 have no resources)
*/
typedef enum vxge_hal_pcie_function_mode_e {
VXGE_HAL_PCIE_FUNC_MODE_SF1_VP17,
VXGE_HAL_PCIE_FUNC_MODE_MF8_VP2,
VXGE_HAL_PCIE_FUNC_MODE_SR17_VP1,
VXGE_HAL_PCIE_FUNC_MODE_MR17_VP1,
VXGE_HAL_PCIE_FUNC_MODE_MR8_VP2,
VXGE_HAL_PCIE_FUNC_MODE_MF17_VP1,
VXGE_HAL_PCIE_FUNC_MODE_SR8_VP2,
VXGE_HAL_PCIE_FUNC_MODE_SR4_VP4,
VXGE_HAL_PCIE_FUNC_MODE_MF2_VP8,
VXGE_HAL_PCIE_FUNC_MODE_MF4_VP4,
VXGE_HAL_PCIE_FUNC_MODE_MR4_VP4,
VXGE_HAL_PCIE_FUNC_MODE_MF8P_VP2
} vxge_hal_pcie_function_mode_e;
/* Behavior on failure */
typedef enum vxge_hal_xmac_nwif_behavior_on_failure {
VXGE_HAL_XMAC_NWIF_OnFailure_NoMove,
VXGE_HAL_XMAC_NWIF_OnFailure_OtherPort,
VXGE_HAL_XMAC_NWIF_OnFailure_OtherPortBackOnRestore
} vxge_hal_xmac_nwif_behavior_on_failure;
/*
* Network Port configuration cmds
*/
typedef enum vxge_hal_nwif_cmds {
VXGE_HAL_XMAC_NWIF_Cmd_Version = 0x0,
VXGE_HAL_XMAC_NWIF_Cmd_SetMode = 0x1,
VXGE_HAL_XMAC_NWIF_Cmd_CfgSnglPort = 0x4,
VXGE_HAL_XMAC_NWIF_Cmd_Avail = 0x6,
VXGE_HAL_XMAC_NWIF_Cmd_CfgSetActPassPreferredPort = 0x7,
VXGE_HAL_XMAC_NWIF_Cmd_CfgSetBehaviourOnFailure = 0x8,
VXGE_HAL_XMAC_NWIF_Cmd_CfgDualPort_L2SwitchEnable = 0x9,
VXGE_HAL_XMAC_NWIF_Cmd_CfgDualPort_VPathVector = 0xa,
VXGE_HAL_XMAC_NWIF_Cmd_Get_Active_Config = 0xb
} vxge_hal_nwif_cmds;
/* Network port get active config options */
typedef enum vxge_hal_xmac_nwif_actconfig {
VXGE_HAL_XMAC_NWIF_ActConfig_Avail = 0,
VXGE_HAL_XMAC_NWIF_ActConfig_NWPortMode = 1,
VXGE_HAL_XMAC_NWIF_ActConfig_PreferredPort = 2,
VXGE_HAL_XMAC_NWIF_ActConfig_BehaviourOnFail = 3,
VXGE_HAL_XMAC_NWIF_ActConfig_ActivePort = 4,
VXGE_HAL_XMAC_NWIF_ActConfig_L2SwitchEnabled = 5,
VXGE_HAL_XMAC_NWIF_ActConfig_DualPortPath = 6
} vxge_hal_xmac_nwif_actconfig;
/* Dual port modes */
typedef enum vxge_hal_xmac_nwif_dp_mode {
VXGE_HAL_DP_NP_MODE_DEFAULT,
VXGE_HAL_DP_NP_MODE_LINK_AGGR,
VXGE_HAL_DP_NP_MODE_ACTIVE_PASSIVE,
VXGE_HAL_DP_NP_MODE_SINGLE_PORT,
VXGE_HAL_DP_NP_MODE_DUAL_PORT,
VXGE_HAL_DP_NP_MODE_DISABLE_PORT_MGMT
} vxge_hal_xmac_nwif_dp_mode;
/* L2 switch status */
typedef enum vxge_hal_xmac_nwif_l2_switch_status {
VXGE_HAL_XMAC_NWIF_L2_SWITCH_DISABLE,
VXGE_HAL_XMAC_NWIF_L2_SWITCH_ENABLE
} vxge_hal_xmac_nwif_l2_switch_status;
/*
* vxge_hal_srpcim_alarm_process - Process srpcim Alarms.
* @devh: Device Handle.
* @skip_alarms: Flasg to indicate not to clear alarms
*
* Process srpcim alarms.
*
*/
vxge_hal_status_e
vxge_hal_srpcim_alarm_process(vxge_hal_device_h devh, u32 skip_alarms);
/*
* vxge_hal_srpcim_intr_enable - Enable srpcim interrupts.
* @devh: Device Handle.
*
* Enable srpcim interrupts.
*
* See also: vxge_hal_srpcim_intr_disable()
*/
vxge_hal_status_e
vxge_hal_srpcim_intr_enable(vxge_hal_device_h devh);
/*
* vxge_hal_srpcim_intr_disable - Disable srpcim interrupts.
* @devh: Device Handle.
*
* Disable srpcim interrupts.
*
* See also: vxge_hal_srpcim_intr_enable()
*/
vxge_hal_status_e
vxge_hal_srpcim_intr_disable(vxge_hal_device_h devh);
/*
* vxge_hal_srpcim_msix_set - Associate MSIX vector with srpcim alarm
* @devh: Device Handle.
* @alarm_msix_id: MSIX vector for alarm.
*
* This API will associate a given MSIX vector numbers with srpcim alarm
*/
vxge_hal_status_e
vxge_hal_srpcim_msix_set(vxge_hal_device_h devh, int alarm_msix_id);
/*
* vxge_hal_srpcim_msix_mask - Mask MSIX Vector.
* @devh: Device Handle.
*
* The function masks the srpcim msix interrupt
*
*/
void
vxge_hal_srpcim_msix_mask(vxge_hal_device_h devh);
/*
* vxge_hal_srpcim_msix_clear - Clear MSIX Vector.
* @devh: Device Handle.
*
* The function clears the srpcim msix interrupt
*
*/
void
vxge_hal_srpcim_msix_clear(vxge_hal_device_h devh);
/*
* vxge_hal_srpcim_msix_unmask - Unmask MSIX Vector.
* @devh: Device Handle.
*
* The function unmasks the srpcim msix interrupt
*
*/
void
vxge_hal_srpcim_msix_unmask(vxge_hal_device_h devh);
vxge_hal_status_e
vxge_hal_func_mode_count(vxge_hal_device_h devh,
u32 func_mode, u32 *num_funcs);
vxge_hal_status_e
vxge_hal_send_message(vxge_hal_device_h devh, u64 vp_id, u8 msg_type,
u8 msg_dst, u32 msg_data, u64 *msg_sent_to_vpaths);
/*
* vxge_hal_func_mode_set - Set PCI-E function mode
* @devh: Device Handle.
* @func_mode: PCI-E func mode. Please see vxge_hal_pcie_function_mode_e{}
*
* Set PCI-E function mode.
*
*/
vxge_hal_status_e
vxge_hal_func_mode_get(vxge_hal_device_h devh, u32 *func_mode);
/*
* vxge_hal_func_mode_set - Set PCI-E function mode
* @devh: Device Handle.
* @func_mode: PCI-E func mode. Please see vxge_hal_pcie_function_mode_e{}
*
* Set PCI-E function mode.
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_pcie_func_mode_set(vxge_hal_device_h devh,
vxge_hal_pcie_function_mode_e func_mode);
/*
* vxge_hal_get_active_config - Get active configuration
* @devh: Device Handle.
*
*/
vxge_hal_status_e
vxge_hal_get_active_config(vxge_hal_device_h devh,
vxge_hal_xmac_nwif_actconfig req_config, u64 *cur_config);
/*
* vxge_hw_set_port_mode - Set dual port mode
* override the default dual port mode
* @devh: Device Handle.
*
*/
vxge_hal_status_e
vxge_hal_set_port_mode(vxge_hal_device_h devh,
vxge_hal_xmac_nwif_dp_mode port_mode);
/*
* vxge_hal_set_behavior_on_failure - Set port behaviour
* change port behavior on failure
* @devh: Device Handle.
*/
vxge_hal_status_e
vxge_hal_set_behavior_on_failure(vxge_hal_device_h devh,
vxge_hal_xmac_nwif_behavior_on_failure behave_on_failure);
/*
* vxge_hal_set_l2switch_mode - Set port behaviour
* set l2switch mode
* @devh: Device Handle.
*/
vxge_hal_status_e
vxge_hal_set_l2switch_mode(vxge_hal_device_h devh,
enum vxge_hal_xmac_nwif_l2_switch_status l2_switch);
/*
* vxge_hal_set_fw_api - Setup FW api
* @devh: Device Handle.
*
*/
vxge_hal_status_e
vxge_hal_set_fw_api(vxge_hal_device_h devh, u64 vp_id, u32 action,
u32 offset, u64 data0, u64 data1);
vxge_hal_status_e
vxge_hal_config_vpath_map(vxge_hal_device_h devh, u64 port_map);
vxge_hal_status_e
vxge_hal_get_vpath_mask(vxge_hal_device_h devh, u32 vf_id,
u32 *no_of_vpath, u64 *vpath_mask);
vxge_hal_status_e
vxge_hal_get_vpath_list(vxge_hal_device_h devh, u32 vf_id,
u64 *vpath_list, u32 *vpath_count);
vxge_hal_status_e
vxge_hal_rx_bw_priority_set(vxge_hal_device_h devh, u64 vp_id);
vxge_hal_status_e
vxge_hal_tx_bw_priority_set(vxge_hal_device_h devh, u64 vp_id);
vxge_hal_status_e
vxge_hal_bw_priority_get(vxge_hal_device_h devh, u64 vp_id,
u32 *bandwidth, u32 *priority);
vxge_hal_status_e
vxge_hal_vf_rx_bw_get(vxge_hal_device_h devh, u64 func_id,
u32 *bandwidth, u32 *priority);
/*
* vxge_hal_mrpcim_serial_number_get - Returns the serial number
* @devh: Device Handle.
*
* Return the serial number
*/
const u8 *
vxge_hal_mrpcim_serial_number_get(vxge_hal_device_h devh);
/*
* vxge_hal_mrpcim_fw_upgrade - Upgrade firmware
* @pdev: PCI device object.
* @regh0: BAR0 mapped memory handle (Solaris), or simply PCI device @pdev
* (Linux and the rest.)
* @bar0: Address of BAR0 in PCI config
* @buffer: Buffer containing F/W image
* @length: F/W image length
*
* Upgrade firmware
*/
vxge_hal_status_e
vxge_hal_mrpcim_fw_upgrade(
pci_dev_h pdev,
pci_reg_h regh0,
u8 *bar0,
u8 *buffer,
u32 length);
/*
* vxge_hal_mrpcim_vpath_map_get - Returns the assigned vpaths map
* @pdev: PCI device object.
* @regh0: BAR0 mapped memory handle (Solaris), or simply PCI device @pdev
* (Linux and the rest.)
* @bar0: Address of BAR0 in PCI config
* @func: Function Number
*
* Returns the assigned vpaths map
*/
u64
vxge_hal_mrpcim_vpath_map_get(
pci_dev_h pdev,
pci_reg_h regh0,
u8 *bar0,
u32 func);
/*
* vxge_hal_mrpcim_vpath_qos_set - Set the priority, Guaranteed and maximum
* bandwidth for a vpath.
* @devh: HAL device handle.
* @vp_id: Vpath Id.
* @priority: Priority
* @min_bandwidth: Minimum Bandwidth
* @max_bandwidth: Maximum Bandwidth
*
* Set the Priority, Guaranteed and maximum bandwidth for a given vpath
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_vpath_qos_set(
vxge_hal_device_h devh,
u32 vp_id,
u32 priority,
u32 min_bandwidth,
u32 max_bandwidth);
/*
* vxge_hal_mrpcim_vpath_qos_get - Get the priority, Guaranteed and maximum
* bandwidth for a vpath.
* @devh: HAL device handle.
* @vp_id: Vpath Id.
* @priority: Buffer to return Priority
* @min_bandwidth: Buffer to return Minimum Bandwidth
* @max_bandwidth: Buffer to return Maximum Bandwidth
*
* Get the Priority, Guaranteed and maximum bandwidth for a given vpath
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_vpath_qos_get(
vxge_hal_device_h devh,
u32 vp_id,
u32 *priority,
u32 *min_bandwidth,
u32 *max_bandwidth);
/*
* vxge_hal_mrpcim_mac_addr_add - Add the mac address entry
* into MAC address table.
* @devh: Device handle.
* @offset: Index into the DA table to add the mac address.
* @macaddr: MAC address to be added for this vpath into the list
* @macaddr_mask: MAC address mask for macaddr
* @vpath_vector: Bit mask specifying the vpaths to which the mac address
* applies
* @duplicate_mode: Duplicate MAC address add mode. Please see
* vxge_hal_vpath_mac_addr_add_mode_e {}
*
* Adds the given mac address, mac address mask and vpath vector into the list
*
* see also: vxge_hal_vpath_mac_addr_delete, vxge_hal_vpath_mac_addr_get and
* vxge_hal_vpath_mac_addr_get_next
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_mac_addr_add(
vxge_hal_device_h devh,
u32 offset,
macaddr_t macaddr,
macaddr_t macaddr_mask,
u64 vpath_vector,
u32 duplicate_mode);
/*
* vxge_hal_mrpcim_mac_addr_get - Read the mac address entry
* into MAC address table.
* @devh: Device handle.
* @offset: Index into the DA table to execute the command on.
* @macaddr: Buffer to return MAC address to be added for this vpath
* @macaddr_mask: Buffer to return MAC address mask for macaddr
* @vpath_vector: Buffer to return Bit mask specifying the vpaths to which
* the mac address applies
*
* Reads the mac address,mac address mask and vpath vector from the given offset
*
* see also: vxge_hal_mrpcim_mac_addr_add
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_mac_addr_get(
vxge_hal_device_h devh,
u32 offset,
macaddr_t macaddr,
macaddr_t macaddr_mask,
u64 *vpath_vector);
/*
* vxge_hal_mrpcim_reset - Reset the entire device.
* @devh: HAL device handle.
*
* Soft-reset the device, reset the device stats except reset_cnt.
*
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_ERR_DEVICE_NOT_INITIALIZED - Device is not initialized.
* VXGE_HAL_ERR_RESET_FAILED - Reset failed.
*
* See also: vxge_hal_status_e {}.
*/
vxge_hal_status_e
vxge_hal_mrpcim_reset(vxge_hal_device_h devh);
/*
* vxge_hal_mrpcim_reset_poll - Poll the device for reset complete.
* @devh: HAL device handle.
*
* Soft-reset the device, reset the device stats except reset_cnt.
*
* After reset is done, will try to re-initialize HW.
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_ERR_DEVICE_NOT_INITIALIZED - Device is not initialized.
* VXGE_HAL_ERR_RESET_FAILED - Reset failed.
*
* See also: vxge_hal_status_e {}.
*/
vxge_hal_status_e
vxge_hal_mrpcim_reset_poll(vxge_hal_device_h devh);
/*
* vxge_hal_mrpcim_strip_repl_vlan_tag_enable - Enable strip Repl vlan tag.
* @devh: Device handle.
*
* Enable X3100 strip Repl vlan tag.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_strip_repl_vlan_tag_enable(
vxge_hal_device_h devh);
/*
* vxge_hal_mrpcim_strip_repl_vlan_tag_disable - Disable strip Repl vlan tag.
* @devh: Device handle.
*
* Disable X3100 strip Repl vlan tag.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_strip_repl_vlan_tag_disable(
vxge_hal_device_h devh);
/*
* vxge_hal_mrpcim_intr_enable - Enable the interrupts on mrpcim.
* @devh: HAL device handle.
*
* Enable mrpcim interrupts
*
* See also: vxge_hal_mrpcim_intr_disable().
*/
vxge_hal_status_e
vxge_hal_mrpcim_intr_enable(vxge_hal_device_h devh);
/*
* vxge_hal_mrpcim_intr_disable - Disable the interrupts on mrpcim.
* @devh: HAL device handle.
*
* Disable mrpcim interrupts
*
* See also: vxge_hal_mrpcim_intr_enable().
*/
vxge_hal_status_e
vxge_hal_mrpcim_intr_disable(vxge_hal_device_h devh);
/*
* vxge_hal_mrpcim_lag_config_get - Get the LAG config.
* @devh: Device handle.
* @lconfig: LAG Configuration
*
* Returns the current LAG configuration.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_lag_config_get(
vxge_hal_device_h devh,
vxge_hal_lag_config_t *lconfig);
/*
* vxge_hal_mrpcim_lag_config_set - Set the LAG config.
* @devh: Device handle.
* @lconfig: LAG Configuration
*
* Sets the LAG configuration.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_lag_config_set(
vxge_hal_device_h devh,
vxge_hal_lag_config_t *lconfig);
/*
* vxge_hal_mrpcim_getpause_data -Pause frame frame generation and reception.
* @devh: HAL device handle.
* @port : Port number 0, 1, or 2
* @tx : A field to return the pause generation capability of the NIC.
* @rx : A field to return the pause reception capability of the NIC.
*
* Returns the Pause frame generation and reception capability of the NIC.
* Return value:
* status
*/
vxge_hal_status_e
vxge_hal_mrpcim_getpause_data(vxge_hal_device_h devh,
u32 port,
u32 *tx,
u32 *rx);
/*
* vxge_hal_mrpcim_setpause_data - set/reset pause frame generation.
* @devh: HAL device handle.
* @port : Port number 0, 1, or 2
* @tx: A field that indicates the pause generation capability to be
* set on the NIC.
* @rx: A field that indicates the pause reception capability to be
* set on the NIC.
*
* It can be used to set or reset Pause frame generation or reception
* support of the NIC.
* Return value:
* int, returns 0 on Success
*/
vxge_hal_status_e
vxge_hal_mrpcim_setpause_data(
vxge_hal_device_h devh,
u32 port,
u32 tx,
u32 rx);
/*
* vxge_hal_mrpcim_bist_test - invokes the MemBist test of the card .
* @devh: HAL device handle.
* @data:variable that returns the result of each of the test conducted by
* the driver.
*
* This invokes the MemBist test of the card. We give around
* 2 secs time for the Test to complete. If it's still not complete
* within this peiod, we consider that the test failed.
* Return value:
* 0 on success and -1 on failure.
*/
vxge_hal_status_e
vxge_hal_mrpcim_bist_test(vxge_hal_device_h devh, u64 *data);
/*
* vxge_hal_mrpcim_udp_rth_enable - Enable UDP/RTH.
* @devh: HAL device handle.
*
* enable udp rth
*
*/
vxge_hal_status_e
vxge_hal_mrpcim_udp_rth_enable(
vxge_hal_device_h devh);
/*
* Virtual Paths
*/
/*
* struct vxge_hal_vpath_attr_t - Attributes of virtual path
* @vp_id: Identifier of Virtual Path
* @ring_attr: Attributes of ring for non-offload receive
* @fifo_attr: Attributes of fifo for non-offload transmit
*
* Attributes of virtual path. This structure is passed as parameter
* to the vxge_hal_vpath_open() routine to set the attributes of DMQ, UMQ,
* ring and fifo. After virtual path is open, iWARP/RDMA module can attach
* to virtual path.
*/
typedef struct vxge_hal_vpath_attr_t {
u32 vp_id;
vxge_hal_ring_attr_t ring_attr;
vxge_hal_fifo_attr_t fifo_attr;
} vxge_hal_vpath_attr_t;
/*
* vxge_hal_vpath_open - Open a virtual path on a given adapter
* @devh: handle to device object
* @attr: Virtual path attributes
* @cb_fn: Call back to be called to complete an asynchronous function call
* @client_handle: handle to be returned in the callback
* @vpath_handle: Buffer to return a handle to the vpath
*
* This function is used to open access to virtual path of an
* adapter for offload, LRO and SPDM operations. This function returns
* synchronously.
*/
vxge_hal_status_e
vxge_hal_vpath_open(
vxge_hal_device_h devh,
vxge_hal_vpath_attr_t *attr,
vxge_hal_vpath_callback_f cb_fn,
vxge_hal_client_h client_handle,
vxge_hal_vpath_h *vpath_handle);
/*
* vxge_hal_vpath_enable
* @vpath_handle: Handle to the vpath object
*
* This routine clears the vpath reset and puts vpath in service
*/
vxge_hal_status_e
vxge_hal_vpath_enable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_id - Get virtual path ID
* @vpath_handle: Handle got from previous vpath open
*
* This function returns virtual path id
*/
u32
vxge_hal_vpath_id(vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_close - Close the handle got from previous vpath (vpath) open
* @vpath_handle: Handle got from previous vpath open
*
* This function is used to close access to virtual path opened
* earlier. This function returns synchronously.
*/
vxge_hal_status_e
vxge_hal_vpath_close(vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_reset - Resets vpath
* @vpath_handle: Handle got from previous vpath open
*
* This function is used to request a reset of vpath
*/
vxge_hal_status_e
vxge_hal_vpath_reset(vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_reset_poll - Poll for reset complete
* @vpath_handle: Handle got from previous vpath open
*
* This function is used to poll for the vpath reset completion
*/
vxge_hal_status_e
vxge_hal_vpath_reset_poll(vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_obj_count_get - Get the Object usage count for a given
* virtual path
* @vpath_handle: Virtal path handle
* @obj_counts: Buffer to return object counts
*
* This function returns the object counts for virtual path. This function
* returns synchronously.
*/
vxge_hal_status_e
vxge_hal_vpath_obj_count_get(vxge_hal_vpath_h vpath_handle,
vxge_hal_vpath_sw_obj_count_t *obj_counts);
/*
* vxge_hal_vpath_mtu_check - check MTU value for ranges
* @vpath_handle: Virtal path handle
* @new_mtu: new MTU value to check
*
* Will do sanity check for new MTU value.
*
* Returns: VXGE_HAL_OK - success.
* VXGE_HAL_ERR_INVALID_MTU_SIZE - MTU is invalid.
*
* See also: vxge_hal_vpath_mtu_set()
*/
vxge_hal_status_e
vxge_hal_device_mtu_check(vxge_hal_vpath_h vpath_handle,
unsigned long new_mtu);
/*
* vxge_hal_vpath_mtu_set - Set MTU.
* @vpath_handle: Virtal path handle
* @new_mtu: New MTU size to configure.
*
* Set new MTU value. Example, to use jumbo frames:
* vxge_hal_vpath_mtu_set(my_device, 9600);
*
*/
vxge_hal_status_e
vxge_hal_vpath_mtu_set(vxge_hal_vpath_h vpath_handle,
unsigned long new_mtu);
typedef enum vxge_hal_vpath_mac_addr_add_mode_e {
VXGE_HAL_VPATH_MAC_ADDR_ADD_DUPLICATE = 0,
VXGE_HAL_VPATH_MAC_ADDR_DISCARD_DUPLICATE = 1,
VXGE_HAL_VPATH_MAC_ADDR_REPLACE_DUPLICATE = 2
} vxge_hal_vpath_mac_addr_add_mode_e;
/*
* vxge_hal_vpath_mac_addr_add - Add the mac address entry for this vpath
* to MAC address table.
* @vpath_handle: Vpath handle.
* @macaddr: MAC address to be added for this vpath into the list
* @macaddr_mask: MAC address mask for mac_addr
* @duplicate_mode: Duplicate MAC address add mode. Please see
* vxge_hal_vpath_mac_addr_add_mode_e {}
*
* Adds the given mac address and mac address mask into the list for this
* vpath.
* see also: vxge_hal_vpath_mac_addr_delete, vxge_hal_vpath_mac_addr_get and
* vxge_hal_vpath_mac_addr_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_mac_addr_add(
vxge_hal_vpath_h vpath_handle,
macaddr_t macaddr,
macaddr_t macaddr_mask,
vxge_hal_vpath_mac_addr_add_mode_e duplicate_mode);
/*
* vxge_hal_vpath_mac_addr_get - Get the first mac address entry for this vpath
* from MAC address table.
* @vpath_handle: Vpath handle.
* @macaddr: First MAC address entry for this vpath in the list
* @macaddr_mask: MAC address mask for mac_addr
*
* Returns the first mac address and mac address mask in the list for this
* vpath.
* see also: vxge_hal_vpath_mac_addr_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_mac_addr_get(
vxge_hal_vpath_h vpath_handle,
macaddr_t macaddr,
macaddr_t macaddr_mask);
/*
* vxge_hal_vpath_mac_addr_get_next - Get the next mac address entry for this
* vpath from MAC address table.
* @vpath_handle: Vpath handle.
* @macaddr: Next MAC address entry for this vpath in the list
* @macaddr_mask: MAC address mask for mac_addr
*
* Returns the next mac address and mac address mask in the list for this
* vpath.
* see also: vxge_hal_vpath_mac_addr_get
*
*/
vxge_hal_status_e
vxge_hal_vpath_mac_addr_get_next(
vxge_hal_vpath_h vpath_handle,
macaddr_t macaddr,
macaddr_t macaddr_mask);
/*
* vxge_hal_vpath_mac_addr_delete - Delete the mac address entry for this vpath
* to MAC address table.
* @vpath_handle: Vpath handle.
* @macaddr: MAC address to be added for this vpath into the list
* @macaddr_mask: MAC address mask for macaddr
*
* Delete the given mac address and mac address mask into the list for this
* vpath.
* see also: vxge_hal_vpath_mac_addr_add, vxge_hal_vpath_mac_addr_get and
* vxge_hal_vpath_mac_addr_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_mac_addr_delete(
vxge_hal_vpath_h vpath_handle,
macaddr_t macaddr,
macaddr_t macaddr_mask);
/*
* vxge_hal_vpath_vid_add - Add the vlan id entry for this vpath
* to vlan id table.
* @vpath_handle: Vpath handle.
* @vid: vlan id to be added for this vpath into the list
*
* Adds the given vlan id into the list for this vpath.
* see also: vxge_hal_vpath_vid_delete, vxge_hal_vpath_vid_get and
* vxge_hal_vpath_vid_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_vid_add(
vxge_hal_vpath_h vpath_handle,
u64 vid);
/*
* vxge_hal_vpath_vid_get - Get the first vid entry for this vpath
* from vlan id table.
* @vpath_handle: Vpath handle.
* @vid: Buffer to return vlan id
*
* Returns the first vlan id in the list for this vpath.
* see also: vxge_hal_vpath_vid_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_vid_get(
vxge_hal_vpath_h vpath_handle,
u64 *vid);
/*
* vxge_hal_vpath_vid_get_next - Get the next vid entry for this vpath
* from vlan id table.
* @vpath_handle: Vpath handle.
* @vid: Buffer to return vlan id
*
* Returns the next vlan id in the list for this vpath.
* see also: vxge_hal_vpath_vid_get
*
*/
vxge_hal_status_e
vxge_hal_vpath_vid_get_next(
vxge_hal_vpath_h vpath_handle,
u64 *vid);
/*
* vxge_hal_vpath_vid_delete - Delete the vlan id entry for this vpath
* to vlan id table.
* @vpath_handle: Vpath handle.
* @vid: vlan id to be added for this vpath into the list
*
* Adds the given vlan id into the list for this vpath.
* see also: vxge_hal_vpath_vid_add, vxge_hal_vpath_vid_get and
* vxge_hal_vpath_vid_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_vid_delete(
vxge_hal_vpath_h vpath_handle,
u64 vid);
/*
* vxge_hal_vpath_etype_add - Add the Ethertype entry for this vpath
* to Ethertype table.
* @vpath_handle: Vpath handle.
* @etype: ethertype to be added for this vpath into the list
*
* Adds the given Ethertype into the list for this vpath.
* see also: vxge_hal_vpath_etype_delete, vxge_hal_vpath_etype_get and
* vxge_hal_vpath_etype_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_etype_add(
vxge_hal_vpath_h vpath_handle,
u64 etype);
/*
* vxge_hal_vpath_etype_get - Get the first ethertype entry for this vpath
* from Ethertype table.
* @vpath_handle: Vpath handle.
* @etype: Buffer to return Ethertype
*
* Returns the first ethype entry in the list for this vpath.
* see also: vxge_hal_vpath_etype_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_etype_get(
vxge_hal_vpath_h vpath_handle,
u64 *etype);
/*
* vxge_hal_vpath_etype_get_next - Get the next Ethertype entry for this vpath
* from Ethertype table.
* @vpath_handle: Vpath handle.
* @etype: Buffer to return Ethwrtype
*
* Returns the next Ethwrtype in the list for this vpath.
* see also: vxge_hal_vpath_etype_get
*
*/
vxge_hal_status_e
vxge_hal_vpath_etype_get_next(
vxge_hal_vpath_h vpath_handle,
u64 *etype);
/*
* vxge_hal_vpath_etype_delete - Delete the Ethertype entry for this vpath
* to Ethertype table.
* @vpath_handle: Vpath handle.
* @etype: ethertype to be added for this vpath into the list
*
* Adds the given Ethertype into the list for this vpath.
* see also: vxge_hal_vpath_etype_add, vxge_hal_vpath_etype_get and
* vxge_hal_vpath_etype_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_etype_delete(
vxge_hal_vpath_h vpath_handle,
u64 etype);
/*
* vxge_hal_vpath_port_add - Add the port entry for this vpath
* to port number table.
* @vpath_handle: Vpath handle.
* @port_type: if 0 - Src port or 1 - Dest port
* @protocol: if 0 - TCP or 1 - UDP
* @port: port to be added for this vpath into the list
*
* Adds the given port into the list for this vpath.
* see also: vxge_hal_vpath_port_delete, vxge_hal_vpath_port_get and
* vxge_hal_vpath_port_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_port_add(
vxge_hal_vpath_h vpath_handle,
u32 port_type,
u32 protocol,
u32 port);
/*
* vxge_hal_vpath_port_get - Get the first port number entry for this vpath
* from port number table.
* @vpath_handle: Vpath handle.
* @port_type: Buffer to return if 0 - Src port or 1 - Dest port
* @protocol: Buffer to return if 0 - TCP or 1 - UDP
* @port: Buffer to return port number
*
* Returns the first port number entry in the list for this vpath.
* see also: vxge_hal_vpath_port_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_port_get(
vxge_hal_vpath_h vpath_handle,
u32 *port_type,
u32 *protocol,
u32 *port);
/*
* vxge_hal_vpath_port_get_next - Get the next port number entry for this vpath
* from port number table.
* @vpath_handle: Vpath handle.
* @port_type: Buffer to return if 0 - Src port or 1 - Dest port
* @protocol: Buffer to return if 0 - TCP or 1 - UDP
* @port: Buffer to return port number
*
* Returns the next port number entry in the list for this vpath.
* see also: vxge_hal_vpath_port_get
*
*/
vxge_hal_status_e
vxge_hal_vpath_port_get_next(
vxge_hal_vpath_h vpath_handle,
u32 *port_type,
u32 *protocol,
u32 *port);
/*
* vxge_hal_vpath_port_delete - Delete the port entry for this vpath
* to port number table.
* @vpath_handle: Vpath handle.
* @port_type: if 0 - Src port or 1 - Dest port
* @protocol: if 0 - TCP or 1 - UDP
* @port: port to be added for this vpath into the list
*
* Adds the given port into the list for this vpath.
* see also: vxge_hal_vpath_port_add, vxge_hal_vpath_port_get and
* vxge_hal_vpath_port_get_next
*
*/
vxge_hal_status_e
vxge_hal_vpath_port_delete(
vxge_hal_vpath_h vpath_handle,
u32 port_type,
u32 protocol,
u32 port);
typedef enum vxge_hal_rth_algoritms_t {
RTH_ALG_NONE = -1,
RTH_ALG_JENKINS = 0,
RTH_ALG_MS_RSS = 1,
RTH_ALG_CRC32C = 2
} vxge_hal_rth_algoritms_t;
/*
* struct vxge_hal_rth_hash_types_t - RTH hash types.
* @hash_type_tcpipv4_en: Enables RTH field type HashTypeTcpIPv4
* @hash_type_ipv4_en: Enables RTH field type HashTypeIPv4
* @hash_type_tcpipv6_en: Enables RTH field type HashTypeTcpIPv6
* @hash_type_ipv6_en: Enables RTH field type HashTypeIPv6
* @hash_type_tcpipv6ex_en: Enables RTH field type HashTypeTcpIPv6Ex
* @hash_type_ipv6ex_en: Enables RTH field type HashTypeIPv6Ex
*
* Used to pass RTH hash types to rts_rts_set.
*
* See also: vxge_hal_vpath_rts_rth_set(), vxge_hal_vpath_rts_rth_get().
*/
typedef struct vxge_hal_rth_hash_types_t {
u8 hash_type_tcpipv4_en;
u8 hash_type_ipv4_en;
u8 hash_type_tcpipv6_en;
u8 hash_type_ipv6_en;
u8 hash_type_tcpipv6ex_en;
u8 hash_type_ipv6ex_en;
} vxge_hal_rth_hash_types_t;
/*
* vxge_hal_vpath_udp_rth_disable - Disable UDP/RTH.
* @vpath_handle: Vpath handle.
*
* Disable udp rth
*
*/
vxge_hal_status_e
vxge_hal_vpath_udp_rth_disable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_rts_rth_set - Set/configure RTS hashing.
* @vpath_handle: Virtual Path handle.
* @algorithm: Algorithm Select
* @hash_type: Hash Type
* @bucket_size: no of least significant bits to be used for hashing.
* @it_switch: Itable switch required
*
* Used to set/configure all RTS hashing related stuff.
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_itable_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_set(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rth_algoritms_t algorithm,
vxge_hal_rth_hash_types_t *hash_type,
u16 bucket_size,
u16 it_switch);
/*
* vxge_hal_vpath_rts_rth_get - Read RTS hashing.
* @vpath_handle: Virtual Path handle.
* @algorithm: Buffer to return Algorithm Select
* @hash_type: Buffer to return Hash Type
* @table_select: Buffer to return active Table
* @bucket_size: Buffer to return no of least significant bits used for hashing.
*
* Used to read all RTS hashing related stuff.
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_itable_set(),
* vxge_hal_vpath_rts_rth_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_get(
vxge_hal_vpath_h vpath_handle,
vxge_hal_rth_algoritms_t *algorithm,
vxge_hal_rth_hash_types_t *hash_type,
u8 *table_select,
u16 *bucket_size);
/*
* vxge_hal_vpath_rts_rth_key_set - Configure 40byte secret for hash calc.
*
* @vpath_handle: Virtual Path ahandle.
* @KeySize: Number of 64-bit words
* @Key: upto 40-byte array of 64-bit values
* This function configures the 40-byte secret which is used for hash
* calculation.
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_key_set(
vxge_hal_vpath_h vpath_handle,
u8 KeySize,
u64 *Key);
/*
* vxge_hal_vpath_rts_rth_key_get - Read 40byte secret for hash calc.
*
* @vpath_handle: Virtual Path ahandle.
* @KeySize: Number of 64-bit words
* @Key: Buffer to return the key
* This function reads the 40-byte secret which is used for hash
* calculation.
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_set(),
* vxge_hal_vpath_rts_rth_key_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_key_get(
vxge_hal_vpath_h vpath_handle,
u8 KeySize,
u64 *Key);
/*
* vxge_hal_vpath_rts_rth_jhash_cfg_set - Configure JHASH algorithm
*
* @vpath_handle: Virtual Path ahandle.
* @golden_ratio: Golden ratio
* @init_value: Initial value
* This function configures JENKIN's HASH algorithm
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_jhash_cfg_set(
vxge_hal_vpath_h vpath_handle,
u32 golden_ratio,
u32 init_value);
/*
* vxge_hal_vpath_rts_rth_jhash_cfg_get - Read JHASH algorithm
*
* @vpath_handle: Virtual Path ahandle.
* @golden_ratio: Buffer to return Golden ratio
* @init_value: Buffer to return Initial value
* This function reads JENKIN's HASH algorithm
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_set(),
* vxge_hal_vpath_rts_rth_jhash_cfg_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_jhash_cfg_get(
vxge_hal_vpath_h vpath_handle,
u32 *golden_ratio,
u32 *init_value);
/*
* vxge_hal_vpath_rts_rth_mask_set - Set/configure JHASH mask.
* @vpath_handle: Virtual Path ahandle.
* @table_size: Size of the mask table
* @hash_mask_ipv6sa: IPv6SA Hash Mask
* @hash_mask_ipv6da: IPv6DA Hash Mask
* @hash_mask_ipv4sa: IPv4SA Hash Mask
* @hash_mask_ipv4da: IPv4DA Hash Mask
* @hash_mask_l4sp: L4SP Hash Mask
* @hash_mask_l4dp: L4DP Hash Mask
*
* Used to set/configure indirection table masks.
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_mask_set(
vxge_hal_vpath_h vpath_handle,
u32 table_size,
u32 *hash_mask_ipv6sa,
u32 *hash_mask_ipv6da,
u32 *hash_mask_ipv4sa,
u32 *hash_mask_ipv4da,
u32 *hash_mask_l4sp,
u32 *hash_mask_l4dp);
/*
* vxge_hal_vpath_rts_rth_mask_get - Read JHASH mask.
* @vpath_handle: Virtual Path ahandle.
* @table_size: Size of the mask table
* @hash_mask_ipv6sa: Buffer to return IPv6SA Hash Mask
* @hash_mask_ipv6da: Buffer to return IPv6DA Hash Mask
* @hash_mask_ipv4sa: Buffer to return IPv4SA Hash Mask
* @hash_mask_ipv4da: Buffer to return IPv4DA Hash Mask
* @hash_mask_l4sp: Buffer to return L4SP Hash Mask
* @hash_mask_l4dp: Buffer to return L4DP Hash Mask
*
* Used to read rth mask.
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_set(),
* vxge_hal_vpath_rts_rth_mask_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_mask_get(
vxge_hal_vpath_h vpath_handle,
u32 table_size,
u32 *hash_mask_ipv6sa,
u32 *hash_mask_ipv6da,
u32 *hash_mask_ipv4sa,
u32 *hash_mask_ipv4da,
u32 *hash_mask_l4sp,
u32 *hash_mask_l4dp);
/*
* vxge_hal_vpath_rts_rth_itable_set - Set/configure indirection table (IT).
* @vpath_handles: Virtual Path handles.
* @vpath_count: Number of vpath handles passed in vpath_handles
* @itable: Pointer to indirection table
* @itable_size: Number of entries in itable
*
* Used to set/configure indirection table.
* It enables the required no of entries in the IT.
* It adds entries to the IT.
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_itable_set(
vxge_hal_vpath_h *vpath_handles,
u32 vpath_count,
u8 *itable,
u32 itable_size);
/*
* vxge_hal_vpath_rts_rth_itable_get - Read indirection table (IT).
* @vpath_handles: Virtual Path handles.
* @vpath_count: Number of vpath handles passed in vpath_handles
* @itable: Pointer to the buffer to return indirection table
* @itable_size: pointer to buffer to return Number of entries in itable
*
* Used to read indirection table.
*
* See also: vxge_hal_vpath_rts_rth_clr(), vxge_hal_vpath_rts_rth_set(),
* vxge_hal_vpath_rts_rth_itable_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_itable_get(
vxge_hal_vpath_h *vpath_handles,
u32 vpath_count,
u8 *itable,
u32 itable_size);
/*
* vxge_hal_vpath_rts_rth_clr - Clear RTS hashing.
* @vpath_handles: Virtual Path handles.
* @vpath_count: Number of vpath handles passed in vpath_handles
*
* This function is used to clear all RTS hashing related stuff.
*
* See also: vxge_hal_vpath_rts_rth_set(), vxge_hal_vpath_rts_rth_itable_set().
*/
vxge_hal_status_e
vxge_hal_vpath_rts_rth_clr(
vxge_hal_vpath_h *vpath_handles,
u32 vpath_count);
/*
* vxge_hal_vpath_promisc_enable - Enable promiscuous mode.
* @vpath_handle: Vpath handle.
*
* Enable promiscuous mode of X3100 operation.
*
* See also: vxge_hal_vpath_promisc_disable().
*/
vxge_hal_status_e
vxge_hal_vpath_promisc_enable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_promisc_disable - Disable promiscuous mode.
* @vpath_handle: Vpath handle.
*
* Disable promiscuous mode of X3100 operation.
*
* See also: vxge_hal_vpath_promisc_enable().
*/
vxge_hal_status_e
vxge_hal_vpath_promisc_disable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_bcast_enable - Enable broadcast
* @vpath_handle: Vpath handle.
*
* Enable receiving broadcasts.
*/
vxge_hal_status_e
vxge_hal_vpath_bcast_enable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_bcast_disable - Disable broadcast
* @vpath_handle: Vpath handle.
*
* Disable receiving broadcasts.
*/
vxge_hal_status_e
vxge_hal_vpath_bcast_disable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_mcast_enable - Enable multicast addresses.
* @vpath_handle: Vpath handle.
*
* Enable X3100 multicast addresses.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_vpath_mcast_enable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_mcast_disable - Disable multicast addresses.
* @vpath_handle: Vpath handle.
*
* Disable X3100 multicast addresses.
* Returns: VXGE_HAL_OK - success.
*
*/
vxge_hal_status_e
vxge_hal_vpath_mcast_disable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_ucast_enable - Enable unicast addresses.
* @vpath_handle: Vpath handle.
*
* Enable X3100 unicast addresses.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_vpath_ucast_enable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_ucast_disable - Disable unicast addresses.
* @vpath_handle: Vpath handle.
*
* Disable X3100 unicast addresses.
* Returns: VXGE_HAL_OK - success.
*
*/
vxge_hal_status_e
vxge_hal_vpath_ucast_disable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_all_vid_enable - Enable all Vlan Ids.
* @vpath_handle: Vpath handle.
*
* Enable X3100 vlan ids.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_vpath_all_vid_enable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_all_vid_disable - Disable all Vlan Ids.
* @vpath_handle: Vpath handle.
*
* Disable X3100 vlan ids.
* Returns: VXGE_HAL_OK - success.
*
*/
vxge_hal_status_e
vxge_hal_vpath_all_vid_disable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_strip_vlan_tag_enable - Enable strip vlan tag.
* @vpath_handle: Vpath handle.
*
* Enable X3100 strip vlan tag.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_vpath_strip_vlan_tag_enable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_strip_vlan_tag_disable - Disable strip vlan tag.
* @vpath_handle: Vpath handle.
*
* Disable X3100 strip vlan tag.
* Returns: VXGE_HAL_OK on success.
*
*/
vxge_hal_status_e
vxge_hal_vpath_strip_vlan_tag_disable(
vxge_hal_vpath_h vpath_handle);
void
vxge_hal_vpath_dynamic_tti_rtimer_set(vxge_hal_vpath_h vpath_handle,
u32 timer_val);
void
vxge_hal_vpath_dynamic_rti_rtimer_set(vxge_hal_vpath_h vpath_handle,
u32 timer_val);
void
vxge_hal_vpath_tti_ci_set(vxge_hal_vpath_h vpath_handle);
void
vxge_hal_vpath_tti_ci_reset(vxge_hal_vpath_h vpath_handle);
void
vxge_hal_vpath_rti_ci_set(vxge_hal_vpath_h vpath_handle);
void
vxge_hal_vpath_rti_ci_reset(vxge_hal_vpath_h vpath_handle);
/*
* struct vxge_hal_vpath_tpa_params - Vpath TPA Parameters.
* @tpa_lsov2_en: LSOv2 Behaviour for IP ID roll-over
* 1 - enable, 0 - disable,
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @tpa_ignore_frame_error: Ignore Frame Error. TPA may detect frame integrity
* errors as it processes each frame. If this bit is set to '0',
* the TPA will tag such frames as invalid and they will be dropped
* by the transmit MAC. If the bit is set to '1',the frame will not
* be tagged as "errored". Detectable errors include:
* 1) early end-of-frame error, which occurs when the frame ends
* before the number of bytes predicted by the IP "total length"
* field have been received;
* 2) IP version mismatches;
* 3) IPv6 packets that include routing headers that are not type 0
* 4) Frames which contain IP packets but have an illegal SNAP-OUI
* or LLC-CTRL fields, unless IGNORE_SNAP_OUI or IGNORE_LLC_CTRL
* are set (see below).
* setting the value of this field to VXGE_HAL_DEFAULT_32 - don't
* change current setting
* @tpa_ipv6_keep_searching: If unknown IPv6 header is found,
* 0 - stop searching for TCP
* 1 - keep searching for TCP
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @tpa_l4_pshdr_present: If asserted true, indicates the host has provided a
* valid pseudo header for TCP or UDP running over IPv4 or IPv6
* if set to VXGE_HAL_DEFAULT_32 - don't change current setting
* @tpa_support_mobile_ipv6_hdrs: This register is somewhat equivalent to
* asserting both Hercules register fields LSO_RT2_EN and
* LSO_IPV6_HAO_EN. Enable/disable support for Type 2 Routing
* Headers, and for Mobile-IPv6 Home Address Option (HAO), as
* defined by mobile-ipv6. if set to VXGE_HAL_DEFAULT_32 -
* don't change current setting
*
* See also: vxge_hal_vpath_tpa_set()
*/
typedef struct vxge_hal_vpath_tpa_params {
u32 tpa_lsov2_en;
u32 tpa_ignore_frame_error;
u32 tpa_ipv6_keep_searching;
u32 tpa_l4_pshdr_present;
u32 tpa_support_mobile_ipv6_hdrs;
} vxge_hal_vpath_tpa_params;
/*
* vxge_hal_vpath_tpa_set - Set tpa parameters.
* @vpath_handle: Virtual Path ahandle.
* @params: vxge_hal_vpath_tpa_params {} structure with parameters
*
* The function sets the tpa parametrs for the vpath.
*
* See also: vxge_hal_vpath_tpa_params {}
*/
vxge_hal_status_e
vxge_hal_vpath_tpa_set(
vxge_hal_vpath_h vpath_handle,
vxge_hal_vpath_tpa_params *params);
/*
* struct vxge_hal_vpath_rpa_params - Vpath RPA Parameters.
*
* @rpa_ipv4_tcp_incl_ph: Determines if the pseudo-header is included in the
* calculation of the L4 checksum that is passed to the host. This
* field applies to TCP/IPv4 packets only. This field affects both
* non-offload and LRO traffic. Note that the RPA always includes
* the pseudo-header in the "Checksum Ok" L4 checksum calculation
* i.e. the checksum that decides whether a frame is a candidate to
* be offloaded.
* 0 - Do not include the pseudo-header in L4 checksum calculation.
* This setting should be used if the adapter is incorrectly
* calculating the pseudo-header.
* 1 - Include the pseudo-header in L4 checksum calculation
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_ipv6_tcp_incl_ph: Determines whether the pseudo-header is included in
* the calculation of the L4 checksum that is passed to the host.
* This field applies to TCP/IPv6 packets only. This field affects
* both non-offload and LRO traffic. Note that the RPA always
* includes the pseudo-header in the "Checksum Ok" L4 checksum
* calculation. i.e. the checksum that decides whether a frame
* is a candidate to be offloaded.
* 0 - Do not include the pseudo-header in L4 checksum calculation.
* This setting should be used if the adapter is incorrectly
* calculating the pseudo-header.
* 1 - Include the pseudo-header in L4 checksum calculation
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_ipv4_udp_incl_ph: Determines whether the pseudo-header is included in
* the calculation of the L4 checksum that is passed to the host.
* This field applies to UDP/IPv4 packets only. It only affects
* non-offload traffic(since UDP frames are not candidates for LRO)
* 0 - Do not include the pseudo-header in L4 checksum calculation.
* This setting should be used if the adapter is incorrectly
* calculating the pseudo-header.
* 1 - Include the pseudo-header in L4 checksum calculation
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_ipv6_udp_incl_ph: Determines if the pseudo-header is included in the
* calculation of the L4 checksum that is passed to the host. This
* field applies to UDP/IPv6 packets only. It only affects
* non-offload traffic(since UDP frames are not candidates for LRO)
* 0 - Do not include the pseudo-header in L4 checksum calculation.
* This setting should be used if the adapter is incorrectly
* calculating the pseudo-header.
* 1 - Include the pseudo-header in L4 checksum calculation
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_l4_incl_cf: Determines whether the checksum field (CF) of the received
* frame is included in the calculation of the L4 checksum that is
* passed to the host. This field affects both non-offload and LRO
* traffic. Note that the RPA always includes the checksum field in
* the "Checksum Ok" L4 checksum calculation -- i.e. the checksum
* that decides whether a frame is a candidate to be offloaded.
* 0 - Do not include the checksum field in L4 checksum calculation
* 1 - Include the checksum field in L4 checksum calculation
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_strip_vlan_tag: Strip VLAN Tag enable/disable. Instructs the device to
* remove the VLAN tag from all received tagged frames that are not
* replicated at the internal L2 switch.
* 0 - Do not strip the VLAN tag.
* 1 - Strip the VLAN tag. Regardless of this setting,VLAN tags are
* always placed into the RxDMA descriptor.
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_l4_comp_csum: Determines whether the calculated L4 checksum should be
* complemented before it is passed to the host This field affects
* both non-offload and LRO traffic.
* 0 - Do not complement the calculated L4 checksum.
* 1 - Complement the calculated L4 checksum
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_l3_incl_cf: Determines whether the checksum field (CF) of the received
* frame is included in the calculation of the L3 checksum that is
* passed to the host. This field affects both non-offload and LRO
* traffic. Note that the RPA always includes the checksum field in
* the "Checksum Ok" L3 checksum calculation -- i.e. the checksum
* that decides whether a frame is a candidate to be offloaded.
* 0 - Do not include the checksum field in L3 checksum calculation
* 1 - Include the checksum field in L3 checksum calculation
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_l3_comp_csum: Determines whether the calculated L3 checksum should be
* complemented before it is passed to the host This field affects
* both non-offload and LRO traffic.
* 0 - Do not complement the calculated L3 checksum.
* 1 - Complement the calculated L3 checksum
* VXGE_HAL_DEFAULT_32 - don't change current setting
* @rpa_ucast_all_addr_en: Enables frames with any unicast address (as its
* destination address) to be passed to the host.
* Setting this field to VXGE_HAL_DEFAULT_32 - don't change current
* setting
* @rpa_mcast_all_addr_en: Enables frames with any multicast address (as its
* destination address) to be passed to the host.
* Setting this field to VXGE_HAL_DEFAULT_32 - don't change current
* setting
* @rpa_bcast_en: Enables frames with any broadicast address (as its
* destination address) to be passed to the host.
* Setting this field to VXGE_HAL_DEFAULT_32 - don't change current
* setting
* @rpa_all_vid_en: romiscuous mode, it overrides the value held in this field.
* 0 - Disable;
* 1 - Enable
* VXGE_HAL_DEFAULT_32 - don't change current setting
* Note: RXMAC_GLOBAL_CFG.AUTHORIZE_VP_ALL_VID must be set to
* allow this.
*
* See also: vxge_hal_vpath_rpa_set()
*/
typedef struct vxge_hal_vpath_rpa_params {
u32 rpa_ipv4_tcp_incl_ph;
u32 rpa_ipv6_tcp_incl_ph;
u32 rpa_ipv4_udp_incl_ph;
u32 rpa_ipv6_udp_incl_ph;
u32 rpa_l4_incl_cf;
u32 rpa_strip_vlan_tag;
u32 rpa_l4_comp_csum;
u32 rpa_l3_incl_cf;
u32 rpa_l3_comp_csum;
u32 rpa_ucast_all_addr_en;
u32 rpa_mcast_all_addr_en;
u32 rpa_bcast_en;
u32 rpa_all_vid_en;
} vxge_hal_vpath_rpa_params;
/*
* vxge_hal_vpath_rpa_set - Set rpa parameters.
* @vpath_handle: Virtual Path ahandle.
* @params: vxge_hal_vpath_rpa_params {} structure with parameters
*
* The function sets the rpa parametrs for the vpath.
*
* See also: vxge_hal_vpath_rpa_params {}
*/
vxge_hal_status_e
vxge_hal_vpath_rpa_set(
vxge_hal_vpath_h vpath_handle,
vxge_hal_vpath_rpa_params *params);
/*
* vxge_hal_vpath_poll_rx - Poll Rx od Virtual Path for completed
* descriptors and process the same.
* @vpath_handle: Virtual Path ahandle.
* @got_rx: Buffer to return the flag set if receive interrupt is occured
*
* The function polls the Rx for the completed descriptors and calls
* the upper-layer driver (ULD) via supplied completion callback.
*
* Returns: VXGE_HAL_OK, if the polling is completed successful.
* VXGE_HAL_COMPLETIONS_REMAIN: There are still more completed
* descriptors available which are yet to be processed.
*
* See also: vxge_hal_vpath_poll_tx()
*/
vxge_hal_status_e
vxge_hal_vpath_poll_rx(
vxge_hal_vpath_h vpath_handle,
u32 *got_rx);
/*
* vxge_hal_vpath_poll_tx - Poll Tx for completed descriptors and process
* the same.
* @vpath_handle: Virtual Path ahandle.
* @got_tx: Buffer to return the flag set if transmit interrupt is occured
*
* The function polls the Tx for the completed descriptors and calls
* the upper-layer driver (ULD) via supplied completion callback.
*
* Returns: VXGE_HAL_OK, if the polling is completed successful.
* VXGE_HAL_COMPLETIONS_REMAIN: There are still more completed
* descriptors available which are yet to be processed.
*
* See also: vxge_hal_vpath_poll_rx().
*/
vxge_hal_status_e
vxge_hal_vpath_poll_tx(
vxge_hal_vpath_h vpath_handle,
u32 *got_tx);
/*
* vxge_hal_vpath_intr_enable - Enable vpath interrupts.
* @vpath_handle: Virtual Path handle.
* @op: One of the vxge_hal_vpath_intr_e enumerated values specifying
* the type(s) of interrupts to enable.
*
* Enable vpath interrupts. The function is to be executed the last in
* vpath initialization sequence.
*
* See also: vxge_hal_vpath_intr_disable()
*/
vxge_hal_status_e
vxge_hal_vpath_intr_enable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_intr_disable - Disable vpath interrupts.
* @vpath_handle: Virtual Path handle.
* @op: One of the vxge_hal_vpath_intr_e enumerated values specifying
* the type(s) of interrupts to disable.
*
* Disable vpath interrupts.
*
* See also: vxge_hal_vpath_intr_enable()
*/
vxge_hal_status_e
vxge_hal_vpath_intr_disable(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_mask_all - Mask all vpath interrupts.
* @vpath_handle: Virtual Path handle.
*
* Mask all vpath interrupts.
*
* See also: vxge_hal_vpath_unmask_all()
*/
void
vxge_hal_vpath_mask_all(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_unmask_all - Unmask all vpath interrupts.
* @vpath_handle: Virtual Path handle.
*
* Unmask all vpath interrupts.
*
* See also: vxge_hal_vpath_mask_all()
*/
void
vxge_hal_vpath_unmask_all(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_begin_irq - Begin IRQ processing.
* @vpath_handle: Virtual Path handle.
* @skip_alarms: Do not clear the alarms
* @reason: "Reason" for the interrupt, the value of vpath's
* general_int_status register.
*
* The function performs two actions, It first checks whether (shared IRQ) the
* interrupt was raised by the device. Next, it masks the device interrupts.
*
* Note:
* vxge_hal_vpath_begin_irq() does not flush MMIO writes through the
* bridge. Therefore, two back-to-back interrupts are potentially possible.
* It is the responsibility of the ULD to make sure that only one
* vxge_hal_vpath_continue_irq() runs at a time.
*
* Returns: 0, if the interrupt is not "ours" (note that in this case the
* vpath remain enabled).
* Otherwise, vxge_hal_vpath_begin_irq() returns 64bit general adapter
* status.
* See also: vxge_hal_vpath_handle_irq()
*/
vxge_hal_status_e
vxge_hal_vpath_begin_irq(
vxge_hal_vpath_h vpath_handle,
u32 skip_alarms,
u64 *reason);
/*
* vxge_hal_vpath_continue_irq - Continue handling IRQ: process all
* completed descriptors.
* @vpath_handle: Virtual Path handle.
*
* Process completed descriptors and unmask the vpath interrupts.
*
* The vxge_hal_vpath_continue_irq() calls upper-layer driver (ULD)
* via supplied completion callback.
*
* Note that the vxge_hal_vpath_continue_irq is part of the _fast_ path.
* To optimize the processing, the function does _not_ check for
* errors and alarms.
*
* Returns: VXGE_HAL_OK.
*
* See also: vxge_hal_vpath_handle_irq(),
* vxge_hal_ring_rxd_next_completed(),
* vxge_hal_fifo_txdl_next_completed(), vxge_hal_ring_callback_f {},
* vxge_hal_fifo_callback_f {}.
*/
vxge_hal_status_e
vxge_hal_vpath_continue_irq(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpathe_handle_irq - Handle vpath IRQ.
* @vpath_handle: Virtual Path handle.
* @skip_alarms: Do not clear the alarms
*
* Perform the complete handling of the line interrupt. The function
* performs two calls.
* First it uses vxge_hal_vpath_begin_irq() to check the reason for
* the interrupt and mask the vpath interrupts.
* Second, it calls vxge_hal_vpath_continue_irq() to process all
* completed descriptors and re-enable the interrupts.
*
* Returns: VXGE_HAL_OK - success;
* VXGE_HAL_ERR_WRONG_IRQ - (shared) IRQ produced by other device.
*
* See also: vxge_hal_vpath_begin_irq(), vxge_hal_vpath_continue_irq().
*/
vxge_hal_status_e
vxge_hal_vpath_handle_irq(
vxge_hal_vpath_h vpath_handle,
u32 skip_alarms);
/*
* vxge_hal_vpath_mask_tx - Mask Tx interrupts.
* @vpath_handle: Virtual Path handle.
*
* Mask Tx device interrupts.
*
* See also: vxge_hal_vpath_unmask_tx(), vxge_hal_vpath_mask_rx(),
* vxge_hal_vpath_clear_tx().
*/
void
vxge_hal_vpath_mask_tx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_clear_tx - Acknowledge (that is, clear) the
* condition that has caused the TX interrupt.
* @vpath_handle: Virtual Path handle.
*
* Acknowledge (that is, clear) the condition that has caused
* the Tx interrupt.
* See also: vxge_hal_vpath_begin_irq(), vxge_hal_vpath_continue_irq(),
* vxge_hal_vpath_clear_rx(), vxge_hal_vpath_mask_tx().
*/
void
vxge_hal_vpath_clear_tx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_unmask_tx - Unmask Tx interrupts.
* @vpath_handle: Virtual Path handle.
*
* Unmask Tx vpath interrupts.
*
* See also: vxge_hal_vpath_mask_tx(), vxge_hal_vpath_clear_tx().
*/
void
vxge_hal_vpath_unmask_tx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_mask_rx - Mask Rx interrupts.
* @vpath_handle: Virtual Path handle.
*
* Mask Rx vpath interrupts.
*
* See also: vxge_hal_vpath_unmask_rx(), vxge_hal_vpath_mask_tx(),
* vxge_hal_vpath_clear_rx().
*/
void
vxge_hal_vpath_mask_rx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_clear_rx - Acknowledge (that is, clear) the
* condition that has caused the RX interrupt.
* @vpath_handle: Virtual Path handle.
*
* Acknowledge (that is, clear) the condition that has caused
* the Rx interrupt.
* See also: vxge_hal_vpath_begin_irq(), vxge_hal_vpath_continue_irq(),
* vxge_hal_vpath_clear_tx(), vxge_hal_vpath_mask_rx().
*/
void
vxge_hal_vpath_clear_rx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_unmask_rx - Unmask Rx interrupts.
* @vpath_handle: Virtual Path handle.
*
* Unmask Rx vpath interrupts.
*
* See also: vxge_hal_vpath_mask_rx(), vxge_hal_vpath_clear_rx().
*/
void
vxge_hal_vpath_unmask_rx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_mask_tx_rx - Mask Tx and Rx interrupts.
* @vpath_handle: Virtual Path handle.
*
* Mask Tx and Rx vpath interrupts.
*
* See also: vxge_hal_vpath_unmask_tx_rx(), vxge_hal_vpath_clear_tx_rx().
*/
void
vxge_hal_vpath_mask_tx_rx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_clear_tx_rx - Acknowledge (that is, clear) the
* condition that has caused the Tx and RX interrupt.
* @vpath_handle: Virtual Path handle.
*
* Acknowledge (that is, clear) the condition that has caused
* the Tx and Rx interrupt.
* See also: vxge_hal_vpath_begin_irq(), vxge_hal_vpath_continue_irq(),
* vxge_hal_vpath_clear_tx_rx(), vxge_hal_vpath_mask_tx_rx().
*/
void
vxge_hal_vpath_clear_tx_rx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_unmask_tx_rx - Unmask Tx and Rx interrupts.
* @vpath_handle: Virtual Path handle.
*
* Unmask Tx and Rx vpath interrupts.
*
* See also: vxge_hal_vpath_mask_tx_rx(), vxge_hal_vpath_clear_tx_rx().
*/
void
vxge_hal_vpath_unmask_tx_rx(
vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_alarm_process - Process Alarms.
* @vpath: Virtual Path.
* @skip_alarms: Do not clear the alarms
*
* Process vpath alarms.
*
*/
vxge_hal_status_e
vxge_hal_vpath_alarm_process(
vxge_hal_vpath_h vpath_handle,
u32 skip_alarms);
/* NEWCODE */
vxge_hal_status_e
vxge_hal_vpath_mf_msix_set(vxge_hal_vpath_h vpath_handle,
int *tim_msix_id, int alarm_msix_id);
void
vxge_hal_vpath_mf_msix_clear(vxge_hal_vpath_h vpath_handle, int msix_id);
void
vxge_hal_vpath_mf_msix_mask(vxge_hal_vpath_h vpath_handle, int msix_id);
void
vxge_hal_vpath_mf_msix_unmask(vxge_hal_vpath_h vpath_handle, int msix_id);
/* NEWCODE */
/*
* vxge_hal_vpath_msix_mode - Is MSIX enabled?
* @vpath_handle: Virtual Path handle.
*
* Returns 0 if MSI is enabled for the specified device,
* non-zero otherwise.
*/
u32
vxge_hal_vpath_msix_mode(vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_msix_set - Associate MSIX vectors with TIM interrupts and
* alrms
* @vpath_handle: Virtual Path handle.
* @tim_msix_id: MSIX vectors associated with VXGE_HAL_VPATH_MSIX_MAX number of
* interrupts(Valid numbers 0 to 3).
* @alarm_msix_id: MSIX vector for alarm (Valid numbers 0 to 3).
*
* This API will associate a given MSIX vector numbers with the four TIM
* interrupts and alarm interrupt.
*/
vxge_hal_status_e
vxge_hal_vpath_msix_set(vxge_hal_vpath_h vpath_handle,
int *tim_msix_id,
int alarm_msix_id);
/*
* vxge_hal_vpath_msix_mask - Mask MSIX Vector.
* @vpath_handle: Virtual Path handle.
* @msix_id: MSIX ID
*
* The function masks the msix interrupt for the given msix_id
*
* Note:
*
* Returns: 0,
* Otherwise, VXGE_HAL_ERR_WRONG_IRQ if the msix index is out of range
* status.
* See also:
*/
void
vxge_hal_vpath_msix_mask(vxge_hal_vpath_h vpath_handle, int msix_id);
/*
* vxge_hal_vpath_msix_clear - Clear MSIX Vector.
* @vpath_handle: Virtual Path handle.
* @msix_id: MSI ID
*
* The function clears the msix interrupt for the given msix_id
*
* Note:
*
* Returns: 0,
* Otherwise, VXGE_HAL_ERR_WRONG_IRQ if the msix index is out of range
* status.
* See also:
*/
void
vxge_hal_vpath_msix_clear(vxge_hal_vpath_h vpath_handle, int msix_id);
/*
* vxge_hal_vpath_msix_unmask - Unmask MSIX Vector.
* @vpath_handle: Virtual Path handle.
* @msix_id: MSI ID
*
* The function unmasks the msix interrupt for the given msix_id
*
* Note:
*
* Returns: 0,
* Otherwise, VXGE_HAL_ERR_WRONG_IRQ if the msix index is out of range
* status.
* See also:
*/
void
vxge_hal_vpath_msix_unmask(vxge_hal_vpath_h vpath_handle, int msix_id);
/*
* vxge_hal_vpath_msix_mask_all - Mask all MSIX vectors for the vpath.
* @vpath_handle: Virtual Path handle.
*
* The function masks the msix interrupt for the given vpath
*
*/
void
vxge_hal_vpath_msix_mask_all(vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_msix_unmask_all - Unmask all MSIX vectors for the vpath.
* @vpath_handle: Virtual Path handle.
*
* The function unmasks the msix interrupt for the given vpath
*
*/
void
vxge_hal_vpath_msix_unmask_all(vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_vpath_is_rxdmem_leak - Check for the rxd memory leak.
* @vpath_handle: Virtual Path handle.
*
* The function checks for the rxd memory leak.
*
*/
u32
vxge_hal_vpath_is_rxdmem_leak(vxge_hal_vpath_h vpath_handle);
/*
* vxge_hal_rldram_test - offline test for access to the RldRam chip on
* the NIC
* @devh: HAL device handle.
* @data: variable that returns the result of each of the test
* conducted by the driver.
*
* This is one of the offline test that tests the read and write
* access to the RldRam chip on the NIC.
* Return value:
* 0 on success.
*/
vxge_hal_status_e
vxge_hal_rldram_test(
vxge_hal_device_h devh,
u64 *data);
/*
* vxge_hal_check_alignment - Check buffer alignment and calculate the
* "misaligned" portion.
* @dma_pointer: DMA address of the buffer.
* @size: Buffer size, in bytes.
* @alignment: Alignment "granularity" (see below), in bytes.
* @copy_size: Maximum number of bytes to "extract" from the buffer
* (in order to spost it as a separate scatter-gather entry). See below.
*
* Check buffer alignment and calculate "misaligned" portion, if exists.
* The buffer is considered aligned if its address is multiple of
* the specified @alignment. If this is the case,
* vxge_hal_check_alignment() returns zero.
* Otherwise, vxge_hal_check_alignment() uses the last argument,
* @copy_size,
* to calculate the size to "extract" from the buffer. The @copy_size
* may or may not be equal @alignment. The difference between these two
* arguments is that the @alignment is used to make the decision: aligned
* or not aligned. While the @copy_size is used to calculate the portion
* of the buffer to "extract", i.e. to post as a separate entry in the
* transmit descriptor. For example, the combination
* @alignment=8 and @copy_size=64 will work okay on AMD Opteron boxes.
*
* Note: @copy_size should be a multiple of @alignment. In many practical
* cases @copy_size and @alignment will probably be equal.
*
* See also: vxge_hal_fifo_txdl_buffer_set_aligned().
*/
u32
vxge_hal_check_alignment(
dma_addr_t dma_pointer,
u32 size,
u32 alignment,
u32 copy_size);
void
vxge_hw_vpath_set_zero_rx_frm_len(vxge_hal_device_h devh, u32 vp_id);
void
vxge_hw_vpath_wait_receive_idle(vxge_hal_device_h devh, u32 vp_id,
u32 *count, u32 *total_count);
#define VXGE_HW_MIN_SUCCESSIVE_IDLE_COUNT 5
#define VXGE_HW_MAX_POLLING_COUNT 160
__EXTERN_END_DECLS
#include <dev/vxge/include/vxge-os-debug.h>
#endif /* VXGE_HAL_LL_H */