Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urtw/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/ip_input/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/uslcom/@/amd64/compile/hs32/modules/usr/src/sys/modules/geom/geom_linux_lvm/@/mips/cavium/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urtw/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/ip_input/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/uslcom/@/amd64/compile/hs32/modules/usr/src/sys/modules/geom/geom_linux_lvm/@/mips/cavium/octopci.c |
/*- * Copyright (c) 2010-2011 Juli Mallett <jmallett@FreeBSD.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/mips/cavium/octopci.c 229093 2011-12-31 14:12:12Z hselasky $ */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/mips/cavium/octopci.c 229093 2011-12-31 14:12:12Z hselasky $"); #include <sys/param.h> #include <sys/systm.h> #include <sys/bus.h> #include <sys/endian.h> #include <sys/interrupt.h> #include <sys/malloc.h> #include <sys/kernel.h> #include <sys/module.h> #include <sys/rman.h> #include <vm/vm.h> #include <vm/pmap.h> #include <vm/vm_extern.h> #include <machine/bus.h> #include <machine/cpu.h> #include <machine/pmap.h> #include <contrib/octeon-sdk/cvmx.h> #include <contrib/octeon-sdk/cvmx-interrupt.h> #include <contrib/octeon-sdk/cvmx-pcie.h> #include <dev/pci/pcireg.h> #include <dev/pci/pcivar.h> #include <dev/pci/pcib_private.h> #include <mips/cavium/octopcireg.h> #include <mips/cavium/octopcivar.h> #include "pcib_if.h" #define NPI_WRITE(addr, value) cvmx_write64_uint32((addr) ^ 4, (value)) #define NPI_READ(addr) cvmx_read64_uint32((addr) ^ 4) struct octopci_softc { device_t sc_dev; unsigned sc_domain; unsigned sc_bus; bus_addr_t sc_io_base; unsigned sc_io_next; struct rman sc_io; bus_addr_t sc_mem1_base; unsigned sc_mem1_next; struct rman sc_mem1; }; static void octopci_identify(driver_t *, device_t); static int octopci_probe(device_t); static int octopci_attach(device_t); static int octopci_read_ivar(device_t, device_t, int, uintptr_t *); static struct resource *octopci_alloc_resource(device_t, device_t, int, int *, u_long, u_long, u_long, u_int); static int octopci_activate_resource(device_t, device_t, int, int, struct resource *); static int octopci_maxslots(device_t); static uint32_t octopci_read_config(device_t, u_int, u_int, u_int, u_int, int); static void octopci_write_config(device_t, u_int, u_int, u_int, u_int, uint32_t, int); static int octopci_route_interrupt(device_t, device_t, int); static unsigned octopci_init_bar(device_t, unsigned, unsigned, unsigned, unsigned, uint8_t *); static unsigned octopci_init_device(device_t, unsigned, unsigned, unsigned, unsigned); static unsigned octopci_init_bus(device_t, unsigned); static void octopci_init_pci(device_t); static uint64_t octopci_cs_addr(unsigned, unsigned, unsigned, unsigned); static void octopci_identify(driver_t *drv, device_t parent) { /* XXX Check sysinfo flag. */ BUS_ADD_CHILD(parent, 0, "pcib", 0); if (octeon_has_feature(OCTEON_FEATURE_PCIE)) BUS_ADD_CHILD(parent, 0, "pcib", 1); } static int octopci_probe(device_t dev) { if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { device_set_desc(dev, "Cavium Octeon PCIe bridge"); return (0); } if (device_get_unit(dev) != 0) return (ENXIO); device_set_desc(dev, "Cavium Octeon PCI bridge"); return (0); } static int octopci_attach(device_t dev) { struct octopci_softc *sc; unsigned subbus; int error; sc = device_get_softc(dev); sc->sc_dev = dev; if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { sc->sc_domain = device_get_unit(dev); error = cvmx_pcie_rc_initialize(sc->sc_domain); if (error != 0) { device_printf(dev, "Failed to put PCIe bus in host mode.\n"); return (ENXIO); } /* * In RC mode, the Simple Executive programs the first bus to * be numbered as bus 1, because some IDT bridges used in * Octeon systems object to being attached to bus 0. */ sc->sc_bus = 1; sc->sc_io_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(sc->sc_domain)); sc->sc_io.rm_descr = "Cavium Octeon PCIe I/O Ports"; sc->sc_mem1_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_mem_base_address(sc->sc_domain)); sc->sc_mem1.rm_descr = "Cavium Octeon PCIe Memory"; } else { octopci_init_pci(dev); sc->sc_domain = 0; sc->sc_bus = 0; sc->sc_io_base = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_IO)); sc->sc_io.rm_descr = "Cavium Octeon PCI I/O Ports"; sc->sc_mem1_base = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_MEM1)); sc->sc_mem1.rm_descr = "Cavium Octeon PCI Memory"; } sc->sc_io.rm_type = RMAN_ARRAY; error = rman_init(&sc->sc_io); if (error != 0) return (error); error = rman_manage_region(&sc->sc_io, CVMX_OCT_PCI_IO_BASE, CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE); if (error != 0) return (error); sc->sc_mem1.rm_type = RMAN_ARRAY; error = rman_init(&sc->sc_mem1); if (error != 0) return (error); error = rman_manage_region(&sc->sc_mem1, CVMX_OCT_PCI_MEM1_BASE, CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE); if (error != 0) return (error); /* * Next offsets for resource allocation in octopci_init_bar. */ sc->sc_io_next = 0; sc->sc_mem1_next = 0; /* * Configure devices. */ octopci_write_config(dev, sc->sc_bus, 0, 0, PCIR_SUBBUS_1, 0xff, 1); subbus = octopci_init_bus(dev, sc->sc_bus); octopci_write_config(dev, sc->sc_bus, 0, 0, PCIR_SUBBUS_1, subbus, 1); device_add_child(dev, "pci", device_get_unit(dev)); return (bus_generic_attach(dev)); } static int octopci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) { struct octopci_softc *sc; sc = device_get_softc(dev); switch (which) { case PCIB_IVAR_DOMAIN: *result = sc->sc_domain; return (0); case PCIB_IVAR_BUS: *result = sc->sc_bus; return (0); } return (ENOENT); } static struct resource * octopci_alloc_resource(device_t bus, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct octopci_softc *sc; struct resource *res; struct rman *rm; int error; sc = device_get_softc(bus); switch (type) { case SYS_RES_IRQ: res = bus_generic_alloc_resource(bus, child, type, rid, start, end, count, flags); if (res != NULL) return (res); return (NULL); case SYS_RES_MEMORY: rm = &sc->sc_mem1; break; case SYS_RES_IOPORT: rm = &sc->sc_io; break; default: return (NULL); } res = rman_reserve_resource(rm, start, end, count, flags, child); if (res == NULL) return (NULL); rman_set_rid(res, *rid); rman_set_bustag(res, octopci_bus_space); switch (type) { case SYS_RES_MEMORY: rman_set_bushandle(res, sc->sc_mem1_base + rman_get_start(res)); break; case SYS_RES_IOPORT: rman_set_bushandle(res, sc->sc_io_base + rman_get_start(res)); #if __mips_n64 rman_set_virtual(res, (void *)rman_get_bushandle(res)); #else /* * XXX * We can't access ports via a 32-bit pointer. */ rman_set_virtual(res, NULL); #endif break; } if ((flags & RF_ACTIVE) != 0) { error = bus_activate_resource(child, type, *rid, res); if (error != 0) { rman_release_resource(res); return (NULL); } } return (res); } static int octopci_activate_resource(device_t bus, device_t child, int type, int rid, struct resource *res) { bus_space_handle_t bh; int error; switch (type) { case SYS_RES_IRQ: error = bus_generic_activate_resource(bus, child, type, rid, res); if (error != 0) return (error); return (0); case SYS_RES_MEMORY: case SYS_RES_IOPORT: error = bus_space_map(rman_get_bustag(res), rman_get_bushandle(res), rman_get_size(res), 0, &bh); if (error != 0) return (error); rman_set_bushandle(res, bh); break; default: return (ENXIO); } error = rman_activate_resource(res); if (error != 0) return (error); return (0); } static int octopci_maxslots(device_t dev) { return (PCI_SLOTMAX); } static uint32_t octopci_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg, int bytes) { struct octopci_softc *sc; uint64_t addr; uint32_t data; sc = device_get_softc(dev); if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { if (bus == 0 && slot == 0 && func == 0) return ((uint32_t)-1); switch (bytes) { case 4: return (cvmx_pcie_config_read32(sc->sc_domain, bus, slot, func, reg)); case 2: return (cvmx_pcie_config_read16(sc->sc_domain, bus, slot, func, reg)); case 1: return (cvmx_pcie_config_read8(sc->sc_domain, bus, slot, func, reg)); default: return ((uint32_t)-1); } } addr = octopci_cs_addr(bus, slot, func, reg); switch (bytes) { case 4: data = le32toh(cvmx_read64_uint32(addr)); return (data); case 2: data = le16toh(cvmx_read64_uint16(addr)); return (data); case 1: data = cvmx_read64_uint8(addr); return (data); default: return ((uint32_t)-1); } } static void octopci_write_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg, uint32_t data, int bytes) { struct octopci_softc *sc; uint64_t addr; sc = device_get_softc(dev); if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { switch (bytes) { case 4: cvmx_pcie_config_write32(sc->sc_domain, bus, slot, func, reg, data); return; case 2: cvmx_pcie_config_write16(sc->sc_domain, bus, slot, func, reg, data); return; case 1: cvmx_pcie_config_write8(sc->sc_domain, bus, slot, func, reg, data); return; default: return; } } addr = octopci_cs_addr(bus, slot, func, reg); switch (bytes) { case 4: cvmx_write64_uint32(addr, htole32(data)); return; case 2: cvmx_write64_uint16(addr, htole16(data)); return; case 1: cvmx_write64_uint8(addr, data); return; default: return; } } static int octopci_route_interrupt(device_t dev, device_t child, int pin) { struct octopci_softc *sc; unsigned bus, slot, func; unsigned irq; sc = device_get_softc(dev); if (octeon_has_feature(OCTEON_FEATURE_PCIE)) return (CVMX_IRQ_PCI_INT0 + pin - 1); bus = pci_get_bus(child); slot = pci_get_slot(child); func = pci_get_function(child); /* * Board types we have to know at compile-time. */ #if defined(OCTEON_BOARD_CAPK_0100ND) if (bus == 0 && slot == 12 && func == 0) return (CVMX_IRQ_PCI_INT2); #endif /* * For board types we can determine at runtime. */ switch (cvmx_sysinfo_get()->board_type) { #if defined(OCTEON_VENDOR_LANNER) case CVMX_BOARD_TYPE_CUST_LANNER_MR955: return (CVMX_IRQ_PCI_INT0 + pin - 1); case CVMX_BOARD_TYPE_CUST_LANNER_MR320: if (slot < 32) { if (slot == 3 || slot == 9) irq = pin; else irq = pin - 1; return (CVMX_IRQ_PCI_INT0 + (irq & 3)); } break; #endif default: break; } irq = slot + pin - 3; return (CVMX_IRQ_PCI_INT0 + (irq & 3)); } static unsigned octopci_init_bar(device_t dev, unsigned b, unsigned s, unsigned f, unsigned barnum, uint8_t *commandp) { struct octopci_softc *sc; uint64_t bar; unsigned size; int barsize; sc = device_get_softc(dev); octopci_write_config(dev, b, s, f, PCIR_BAR(barnum), 0xffffffff, 4); bar = octopci_read_config(dev, b, s, f, PCIR_BAR(barnum), 4); if (bar == 0) { /* Bar not implemented; got to next bar. */ return (barnum + 1); } if (PCI_BAR_IO(bar)) { size = ~(bar & PCIM_BAR_IO_BASE) + 1; sc->sc_io_next = (sc->sc_io_next + size - 1) & ~(size - 1); if (sc->sc_io_next + size > CVMX_OCT_PCI_IO_SIZE) { device_printf(dev, "%02x.%02x:%02x: no ports for BAR%u.\n", b, s, f, barnum); return (barnum + 1); } octopci_write_config(dev, b, s, f, PCIR_BAR(barnum), CVMX_OCT_PCI_IO_BASE + sc->sc_io_next, 4); sc->sc_io_next += size; /* * Enable I/O ports. */ *commandp |= PCIM_CMD_PORTEN; return (barnum + 1); } else { if (PCIR_BAR(barnum) == PCIR_BIOS) { /* * ROM BAR is always 32-bit. */ barsize = 1; } else { switch (bar & PCIM_BAR_MEM_TYPE) { case PCIM_BAR_MEM_64: /* * XXX * High 32 bits are all zeroes for now. */ octopci_write_config(dev, b, s, f, PCIR_BAR(barnum + 1), 0, 4); barsize = 2; break; default: barsize = 1; break; } } size = ~(bar & (uint32_t)PCIM_BAR_MEM_BASE) + 1; sc->sc_mem1_next = (sc->sc_mem1_next + size - 1) & ~(size - 1); if (sc->sc_mem1_next + size > CVMX_OCT_PCI_MEM1_SIZE) { device_printf(dev, "%02x.%02x:%02x: no memory for BAR%u.\n", b, s, f, barnum); return (barnum + barsize); } octopci_write_config(dev, b, s, f, PCIR_BAR(barnum), CVMX_OCT_PCI_MEM1_BASE + sc->sc_mem1_next, 4); sc->sc_mem1_next += size; /* * Enable memory access. */ *commandp |= PCIM_CMD_MEMEN; return (barnum + barsize); } } static unsigned octopci_init_device(device_t dev, unsigned b, unsigned s, unsigned f, unsigned secbus) { unsigned barnum, bars; uint8_t brctl; uint8_t class, subclass; uint8_t command; uint8_t hdrtype; /* Read header type (again.) */ hdrtype = octopci_read_config(dev, b, s, f, PCIR_HDRTYPE, 1); /* * Disable memory and I/O while programming BARs. */ command = octopci_read_config(dev, b, s, f, PCIR_COMMAND, 1); command &= ~(PCIM_CMD_MEMEN | PCIM_CMD_PORTEN); octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1); DELAY(10000); /* Program BARs. */ switch (hdrtype & PCIM_HDRTYPE) { case PCIM_HDRTYPE_NORMAL: bars = 6; break; case PCIM_HDRTYPE_BRIDGE: bars = 2; break; case PCIM_HDRTYPE_CARDBUS: bars = 0; break; default: device_printf(dev, "%02x.%02x:%02x: invalid header type %#x\n", b, s, f, hdrtype); return (secbus); } barnum = 0; while (barnum < bars) barnum = octopci_init_bar(dev, b, s, f, barnum, &command); /* Enable bus mastering. */ command |= PCIM_CMD_BUSMASTEREN; /* Enable whatever facilities the BARs require. */ octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1); DELAY(10000); /* * Set cache line size. On Octeon it should be 128 bytes, * but according to Linux some Intel bridges have trouble * with values over 64 bytes, so use 64 bytes. */ octopci_write_config(dev, b, s, f, PCIR_CACHELNSZ, 16, 1); /* Set latency timer. */ octopci_write_config(dev, b, s, f, PCIR_LATTIMER, 48, 1); /* Board-specific or device-specific fixups and workarounds. */ switch (cvmx_sysinfo_get()->board_type) { #if defined(OCTEON_VENDOR_LANNER) case CVMX_BOARD_TYPE_CUST_LANNER_MR955: if (b == 1 && s == 7 && f == 0) { bus_addr_t busaddr, unitbusaddr; uint32_t bar; uint32_t tmp; unsigned unit; /* * Set Tx DMA power. */ bar = octopci_read_config(dev, b, s, f, PCIR_BAR(3), 4); busaddr = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_MEM1)); busaddr += (bar & (uint32_t)PCIM_BAR_MEM_BASE); for (unit = 0; unit < 4; unit++) { unitbusaddr = busaddr + 0x430 + (unit << 8); tmp = le32toh(cvmx_read64_uint32(unitbusaddr)); tmp &= ~0x700; tmp |= 0x300; cvmx_write64_uint32(unitbusaddr, htole32(tmp)); } } break; #endif default: break; } /* Configure PCI-PCI bridges. */ class = octopci_read_config(dev, b, s, f, PCIR_CLASS, 1); if (class != PCIC_BRIDGE) return (secbus); subclass = octopci_read_config(dev, b, s, f, PCIR_SUBCLASS, 1); if (subclass != PCIS_BRIDGE_PCI) return (secbus); /* Enable memory and I/O access. */ command |= PCIM_CMD_MEMEN | PCIM_CMD_PORTEN; octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1); /* Enable errors and parity checking. Do a bus reset. */ brctl = octopci_read_config(dev, b, s, f, PCIR_BRIDGECTL_1, 1); brctl |= PCIB_BCR_PERR_ENABLE | PCIB_BCR_SERR_ENABLE; /* Perform a secondary bus reset. */ brctl |= PCIB_BCR_SECBUS_RESET; octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1); DELAY(100000); brctl &= ~PCIB_BCR_SECBUS_RESET; octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1); secbus++; /* Program memory and I/O ranges. */ octopci_write_config(dev, b, s, f, PCIR_MEMBASE_1, CVMX_OCT_PCI_MEM1_BASE >> 16, 2); octopci_write_config(dev, b, s, f, PCIR_MEMLIMIT_1, (CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE - 1) >> 16, 2); octopci_write_config(dev, b, s, f, PCIR_IOBASEL_1, CVMX_OCT_PCI_IO_BASE >> 8, 1); octopci_write_config(dev, b, s, f, PCIR_IOBASEH_1, CVMX_OCT_PCI_IO_BASE >> 16, 2); octopci_write_config(dev, b, s, f, PCIR_IOLIMITL_1, (CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE - 1) >> 8, 1); octopci_write_config(dev, b, s, f, PCIR_IOLIMITH_1, (CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE - 1) >> 16, 2); /* Program prefetchable memory decoder. */ /* XXX */ /* Probe secondary/subordinate buses. */ octopci_write_config(dev, b, s, f, PCIR_PRIBUS_1, b, 1); octopci_write_config(dev, b, s, f, PCIR_SECBUS_1, secbus, 1); octopci_write_config(dev, b, s, f, PCIR_SUBBUS_1, 0xff, 1); /* Perform a secondary bus reset. */ brctl |= PCIB_BCR_SECBUS_RESET; octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1); DELAY(100000); brctl &= ~PCIB_BCR_SECBUS_RESET; octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1); /* Give the bus time to settle now before reading configspace. */ DELAY(100000); secbus = octopci_init_bus(dev, secbus); octopci_write_config(dev, b, s, f, PCIR_SUBBUS_1, secbus, 1); return (secbus); } static unsigned octopci_init_bus(device_t dev, unsigned b) { unsigned s, f; uint8_t hdrtype; unsigned secbus; secbus = b; for (s = 0; s <= PCI_SLOTMAX; s++) { for (f = 0; f <= PCI_FUNCMAX; f++) { hdrtype = octopci_read_config(dev, b, s, f, PCIR_HDRTYPE, 1); if (hdrtype == 0xff) { if (f == 0) break; /* Next slot. */ continue; /* Next function. */ } secbus = octopci_init_device(dev, b, s, f, secbus); if (f == 0 && (hdrtype & PCIM_MFDEV) == 0) break; /* Next slot. */ } } return (secbus); } static uint64_t octopci_cs_addr(unsigned bus, unsigned slot, unsigned func, unsigned reg) { octeon_pci_config_space_address_t pci_addr; pci_addr.u64 = 0; pci_addr.s.upper = 2; pci_addr.s.io = 1; pci_addr.s.did = 3; pci_addr.s.subdid = CVMX_OCT_SUBDID_PCI_CFG; pci_addr.s.endian_swap = 1; pci_addr.s.bus = bus; pci_addr.s.dev = slot; pci_addr.s.func = func; pci_addr.s.reg = reg; return (pci_addr.u64); } static void octopci_init_pci(device_t dev) { cvmx_npi_mem_access_subid_t npi_mem_access_subid; cvmx_npi_pci_int_arb_cfg_t npi_pci_int_arb_cfg; cvmx_npi_ctl_status_t npi_ctl_status; cvmx_pci_ctl_status_2_t pci_ctl_status_2; cvmx_pci_cfg56_t pci_cfg56; cvmx_pci_cfg22_t pci_cfg22; cvmx_pci_cfg16_t pci_cfg16; cvmx_pci_cfg19_t pci_cfg19; cvmx_pci_cfg01_t pci_cfg01; unsigned i; /* * Reset the PCI bus. */ cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1); cvmx_read_csr(CVMX_CIU_SOFT_PRST); DELAY(2000); npi_ctl_status.u64 = 0; npi_ctl_status.s.max_word = 1; npi_ctl_status.s.timer = 1; cvmx_write_csr(CVMX_NPI_CTL_STATUS, npi_ctl_status.u64); /* * Set host mode. */ switch (cvmx_sysinfo_get()->board_type) { #if defined(OCTEON_VENDOR_LANNER) case CVMX_BOARD_TYPE_CUST_LANNER_MR320: case CVMX_BOARD_TYPE_CUST_LANNER_MR955: /* 32-bit PCI-X */ cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x0); break; #endif default: /* 64-bit PCI-X */ cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4); break; } cvmx_read_csr(CVMX_CIU_SOFT_PRST); DELAY(2000); /* * Enable BARs and configure big BAR mode. */ pci_ctl_status_2.u32 = 0; pci_ctl_status_2.s.bb1_hole = 5; /* 256MB hole in BAR1 */ pci_ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */ pci_ctl_status_2.s.bb_ca = 1; /* Bypass cache for big BAR */ pci_ctl_status_2.s.bb_es = 1; /* Do big BAR byte-swapping */ pci_ctl_status_2.s.bb1 = 1; /* BAR1 is big */ pci_ctl_status_2.s.bb0 = 1; /* BAR0 is big */ pci_ctl_status_2.s.bar2pres = 1; /* BAR2 present */ pci_ctl_status_2.s.pmo_amod = 1; /* Round-robin priority */ pci_ctl_status_2.s.tsr_hwm = 1; pci_ctl_status_2.s.bar2_enb = 1; /* Enable BAR2 */ pci_ctl_status_2.s.bar2_esx = 1; /* Do BAR2 byte-swapping */ pci_ctl_status_2.s.bar2_cax = 1; /* Bypass cache for BAR2 */ NPI_WRITE(CVMX_NPI_PCI_CTL_STATUS_2, pci_ctl_status_2.u32); DELAY(2000); pci_ctl_status_2.u32 = NPI_READ(CVMX_NPI_PCI_CTL_STATUS_2); device_printf(dev, "%u-bit PCI%s bus.\n", pci_ctl_status_2.s.ap_64ad ? 64 : 32, pci_ctl_status_2.s.ap_pcix ? "-X" : ""); /* * Set up transaction splitting, etc., parameters. */ pci_cfg19.u32 = 0; pci_cfg19.s.mrbcm = 1; if (pci_ctl_status_2.s.ap_pcix) { pci_cfg19.s.mdrrmc = 0; pci_cfg19.s.tdomc = 4; } else { pci_cfg19.s.mdrrmc = 2; pci_cfg19.s.tdomc = 1; } NPI_WRITE(CVMX_NPI_PCI_CFG19, pci_cfg19.u32); NPI_READ(CVMX_NPI_PCI_CFG19); /* * Set up PCI error handling and memory access. */ pci_cfg01.u32 = 0; pci_cfg01.s.fbbe = 1; pci_cfg01.s.see = 1; pci_cfg01.s.pee = 1; pci_cfg01.s.me = 1; pci_cfg01.s.msae = 1; if (pci_ctl_status_2.s.ap_pcix) { pci_cfg01.s.fbb = 0; } else { pci_cfg01.s.fbb = 1; } NPI_WRITE(CVMX_NPI_PCI_CFG01, pci_cfg01.u32); NPI_READ(CVMX_NPI_PCI_CFG01); /* * Enable the Octeon bus arbiter. */ npi_pci_int_arb_cfg.u64 = 0; npi_pci_int_arb_cfg.s.en = 1; cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, npi_pci_int_arb_cfg.u64); /* * Disable master latency timer. */ pci_cfg16.u32 = 0; pci_cfg16.s.mltd = 1; NPI_WRITE(CVMX_NPI_PCI_CFG16, pci_cfg16.u32); NPI_READ(CVMX_NPI_PCI_CFG16); /* * Configure master arbiter. */ pci_cfg22.u32 = 0; pci_cfg22.s.flush = 1; pci_cfg22.s.mrv = 255; NPI_WRITE(CVMX_NPI_PCI_CFG22, pci_cfg22.u32); NPI_READ(CVMX_NPI_PCI_CFG22); /* * Set up PCI-X capabilities. */ if (pci_ctl_status_2.s.ap_pcix) { pci_cfg56.u32 = 0; pci_cfg56.s.most = 3; pci_cfg56.s.roe = 1; /* Enable relaxed ordering */ pci_cfg56.s.dpere = 1; pci_cfg56.s.ncp = 0xe8; pci_cfg56.s.pxcid = 7; NPI_WRITE(CVMX_NPI_PCI_CFG56, pci_cfg56.u32); NPI_READ(CVMX_NPI_PCI_CFG56); } NPI_WRITE(CVMX_NPI_PCI_READ_CMD_6, 0x22); NPI_READ(CVMX_NPI_PCI_READ_CMD_6); NPI_WRITE(CVMX_NPI_PCI_READ_CMD_C, 0x33); NPI_READ(CVMX_NPI_PCI_READ_CMD_C); NPI_WRITE(CVMX_NPI_PCI_READ_CMD_E, 0x33); NPI_READ(CVMX_NPI_PCI_READ_CMD_E); /* * Configure MEM1 sub-DID access. */ npi_mem_access_subid.u64 = 0; npi_mem_access_subid.s.esr = 1; /* Byte-swap on read */ npi_mem_access_subid.s.esw = 1; /* Byte-swap on write */ switch (cvmx_sysinfo_get()->board_type) { #if defined(OCTEON_VENDOR_LANNER) case CVMX_BOARD_TYPE_CUST_LANNER_MR955: npi_mem_access_subid.s.shortl = 1; break; #endif default: break; } cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, npi_mem_access_subid.u64); /* * Configure BAR2. Linux says this has to come first. */ NPI_WRITE(CVMX_NPI_PCI_CFG08, 0x00000000); NPI_READ(CVMX_NPI_PCI_CFG08); NPI_WRITE(CVMX_NPI_PCI_CFG09, 0x00000080); NPI_READ(CVMX_NPI_PCI_CFG09); /* * Disable BAR1 IndexX. */ for (i = 0; i < 32; i++) { NPI_WRITE(CVMX_NPI_PCI_BAR1_INDEXX(i), 0); NPI_READ(CVMX_NPI_PCI_BAR1_INDEXX(i)); } /* * Configure BAR0 and BAR1. */ NPI_WRITE(CVMX_NPI_PCI_CFG04, 0x00000000); NPI_READ(CVMX_NPI_PCI_CFG04); NPI_WRITE(CVMX_NPI_PCI_CFG05, 0x00000000); NPI_READ(CVMX_NPI_PCI_CFG05); NPI_WRITE(CVMX_NPI_PCI_CFG06, 0x80000000); NPI_READ(CVMX_NPI_PCI_CFG06); NPI_WRITE(CVMX_NPI_PCI_CFG07, 0x00000000); NPI_READ(CVMX_NPI_PCI_CFG07); /* * Clear PCI interrupts. */ cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, 0xffffffffffffffffull); } static device_method_t octopci_methods[] = { /* Device interface */ DEVMETHOD(device_identify, octopci_identify), DEVMETHOD(device_probe, octopci_probe), DEVMETHOD(device_attach, octopci_attach), /* Bus interface */ DEVMETHOD(bus_read_ivar, octopci_read_ivar), DEVMETHOD(bus_alloc_resource, octopci_alloc_resource), DEVMETHOD(bus_release_resource, bus_generic_release_resource), DEVMETHOD(bus_activate_resource,octopci_activate_resource), DEVMETHOD(bus_deactivate_resource,bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), DEVMETHOD(bus_add_child, bus_generic_add_child), /* pcib interface */ DEVMETHOD(pcib_maxslots, octopci_maxslots), DEVMETHOD(pcib_read_config, octopci_read_config), DEVMETHOD(pcib_write_config, octopci_write_config), DEVMETHOD(pcib_route_interrupt, octopci_route_interrupt), DEVMETHOD_END }; static driver_t octopci_driver = { "pcib", octopci_methods, sizeof(struct octopci_softc), }; static devclass_t octopci_devclass; DRIVER_MODULE(octopci, ciu, octopci_driver, octopci_devclass, 0, 0);