| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urtw/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/ip_input/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/uslcom/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/bridge/@/contrib/dev/acpica/executer/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urtw/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/ip_input/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/uslcom/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/bridge/@/contrib/dev/acpica/executer/exregion.c |
/******************************************************************************
*
* Module Name: exregion - ACPI default OpRegion (address space) handlers
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define __EXREGION_C__
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/acinterp.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME ("exregion")
/*******************************************************************************
*
* FUNCTION: AcpiExSystemMemorySpaceHandler
*
* PARAMETERS: Function - Read or Write operation
* Address - Where in the space to read or write
* BitWidth - Field width in bits (8, 16, or 32)
* Value - Pointer to in or out value
* HandlerContext - Pointer to Handler's context
* RegionContext - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the System Memory address space (Op Region)
*
******************************************************************************/
ACPI_STATUS
AcpiExSystemMemorySpaceHandler (
UINT32 Function,
ACPI_PHYSICAL_ADDRESS Address,
UINT32 BitWidth,
UINT64 *Value,
void *HandlerContext,
void *RegionContext)
{
ACPI_STATUS Status = AE_OK;
void *LogicalAddrPtr = NULL;
ACPI_MEM_SPACE_CONTEXT *MemInfo = RegionContext;
UINT32 Length;
ACPI_SIZE MapLength;
ACPI_SIZE PageBoundaryMapLength;
#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
UINT32 Remainder;
#endif
ACPI_FUNCTION_TRACE (ExSystemMemorySpaceHandler);
/* Validate and translate the bit width */
switch (BitWidth)
{
case 8:
Length = 1;
break;
case 16:
Length = 2;
break;
case 32:
Length = 4;
break;
case 64:
Length = 8;
break;
default:
ACPI_ERROR ((AE_INFO, "Invalid SystemMemory width %u",
BitWidth));
return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
}
#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
/*
* Hardware does not support non-aligned data transfers, we must verify
* the request.
*/
(void) AcpiUtShortDivide ((UINT64) Address, Length, NULL, &Remainder);
if (Remainder != 0)
{
return_ACPI_STATUS (AE_AML_ALIGNMENT);
}
#endif
/*
* Does the request fit into the cached memory mapping?
* Is 1) Address below the current mapping? OR
* 2) Address beyond the current mapping?
*/
if ((Address < MemInfo->MappedPhysicalAddress) ||
(((UINT64) Address + Length) >
((UINT64)
MemInfo->MappedPhysicalAddress + MemInfo->MappedLength)))
{
/*
* The request cannot be resolved by the current memory mapping;
* Delete the existing mapping and create a new one.
*/
if (MemInfo->MappedLength)
{
/* Valid mapping, delete it */
AcpiOsUnmapMemory (MemInfo->MappedLogicalAddress,
MemInfo->MappedLength);
}
/*
* October 2009: Attempt to map from the requested address to the
* end of the region. However, we will never map more than one
* page, nor will we cross a page boundary.
*/
MapLength = (ACPI_SIZE)
((MemInfo->Address + MemInfo->Length) - Address);
/*
* If mapping the entire remaining portion of the region will cross
* a page boundary, just map up to the page boundary, do not cross.
* On some systems, crossing a page boundary while mapping regions
* can cause warnings if the pages have different attributes
* due to resource management.
*
* This has the added benefit of constraining a single mapping to
* one page, which is similar to the original code that used a 4k
* maximum window.
*/
PageBoundaryMapLength =
ACPI_ROUND_UP (Address, ACPI_DEFAULT_PAGE_SIZE) - Address;
if (PageBoundaryMapLength == 0)
{
PageBoundaryMapLength = ACPI_DEFAULT_PAGE_SIZE;
}
if (MapLength > PageBoundaryMapLength)
{
MapLength = PageBoundaryMapLength;
}
/* Create a new mapping starting at the address given */
MemInfo->MappedLogicalAddress = AcpiOsMapMemory (
(ACPI_PHYSICAL_ADDRESS) Address, MapLength);
if (!MemInfo->MappedLogicalAddress)
{
ACPI_ERROR ((AE_INFO,
"Could not map memory at 0x%8.8X%8.8X, size %u",
ACPI_FORMAT_NATIVE_UINT (Address), (UINT32) MapLength));
MemInfo->MappedLength = 0;
return_ACPI_STATUS (AE_NO_MEMORY);
}
/* Save the physical address and mapping size */
MemInfo->MappedPhysicalAddress = Address;
MemInfo->MappedLength = MapLength;
}
/*
* Generate a logical pointer corresponding to the address we want to
* access
*/
LogicalAddrPtr = MemInfo->MappedLogicalAddress +
((UINT64) Address - (UINT64) MemInfo->MappedPhysicalAddress);
ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
"System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n",
BitWidth, Function, ACPI_FORMAT_NATIVE_UINT (Address)));
/*
* Perform the memory read or write
*
* Note: For machines that do not support non-aligned transfers, the target
* address was checked for alignment above. We do not attempt to break the
* transfer up into smaller (byte-size) chunks because the AML specifically
* asked for a transfer width that the hardware may require.
*/
switch (Function)
{
case ACPI_READ:
*Value = 0;
switch (BitWidth)
{
case 8:
*Value = (UINT64) ACPI_GET8 (LogicalAddrPtr);
break;
case 16:
*Value = (UINT64) ACPI_GET16 (LogicalAddrPtr);
break;
case 32:
*Value = (UINT64) ACPI_GET32 (LogicalAddrPtr);
break;
case 64:
*Value = (UINT64) ACPI_GET64 (LogicalAddrPtr);
break;
default:
/* BitWidth was already validated */
break;
}
break;
case ACPI_WRITE:
switch (BitWidth)
{
case 8:
ACPI_SET8 (LogicalAddrPtr) = (UINT8) *Value;
break;
case 16:
ACPI_SET16 (LogicalAddrPtr) = (UINT16) *Value;
break;
case 32:
ACPI_SET32 ( LogicalAddrPtr) = (UINT32) *Value;
break;
case 64:
ACPI_SET64 (LogicalAddrPtr) = (UINT64) *Value;
break;
default:
/* BitWidth was already validated */
break;
}
break;
default:
Status = AE_BAD_PARAMETER;
break;
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExSystemIoSpaceHandler
*
* PARAMETERS: Function - Read or Write operation
* Address - Where in the space to read or write
* BitWidth - Field width in bits (8, 16, or 32)
* Value - Pointer to in or out value
* HandlerContext - Pointer to Handler's context
* RegionContext - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the System IO address space (Op Region)
*
******************************************************************************/
ACPI_STATUS
AcpiExSystemIoSpaceHandler (
UINT32 Function,
ACPI_PHYSICAL_ADDRESS Address,
UINT32 BitWidth,
UINT64 *Value,
void *HandlerContext,
void *RegionContext)
{
ACPI_STATUS Status = AE_OK;
UINT32 Value32;
ACPI_FUNCTION_TRACE (ExSystemIoSpaceHandler);
ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
"System-IO (width %u) R/W %u Address=%8.8X%8.8X\n",
BitWidth, Function, ACPI_FORMAT_NATIVE_UINT (Address)));
/* Decode the function parameter */
switch (Function)
{
case ACPI_READ:
Status = AcpiHwReadPort ((ACPI_IO_ADDRESS) Address,
&Value32, BitWidth);
*Value = Value32;
break;
case ACPI_WRITE:
Status = AcpiHwWritePort ((ACPI_IO_ADDRESS) Address,
(UINT32) *Value, BitWidth);
break;
default:
Status = AE_BAD_PARAMETER;
break;
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExPciConfigSpaceHandler
*
* PARAMETERS: Function - Read or Write operation
* Address - Where in the space to read or write
* BitWidth - Field width in bits (8, 16, or 32)
* Value - Pointer to in or out value
* HandlerContext - Pointer to Handler's context
* RegionContext - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the PCI Config address space (Op Region)
*
******************************************************************************/
ACPI_STATUS
AcpiExPciConfigSpaceHandler (
UINT32 Function,
ACPI_PHYSICAL_ADDRESS Address,
UINT32 BitWidth,
UINT64 *Value,
void *HandlerContext,
void *RegionContext)
{
ACPI_STATUS Status = AE_OK;
ACPI_PCI_ID *PciId;
UINT16 PciRegister;
ACPI_FUNCTION_TRACE (ExPciConfigSpaceHandler);
/*
* The arguments to AcpiOs(Read|Write)PciConfiguration are:
*
* PciSegment is the PCI bus segment range 0-31
* PciBus is the PCI bus number range 0-255
* PciDevice is the PCI device number range 0-31
* PciFunction is the PCI device function number
* PciRegister is the Config space register range 0-255 bytes
*
* Value - input value for write, output address for read
*
*/
PciId = (ACPI_PCI_ID *) RegionContext;
PciRegister = (UINT16) (UINT32) Address;
ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
"Pci-Config %u (%u) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
Function, BitWidth, PciId->Segment, PciId->Bus, PciId->Device,
PciId->Function, PciRegister));
switch (Function)
{
case ACPI_READ:
*Value = 0;
Status = AcpiOsReadPciConfiguration (PciId, PciRegister,
Value, BitWidth);
break;
case ACPI_WRITE:
Status = AcpiOsWritePciConfiguration (PciId, PciRegister,
*Value, BitWidth);
break;
default:
Status = AE_BAD_PARAMETER;
break;
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExCmosSpaceHandler
*
* PARAMETERS: Function - Read or Write operation
* Address - Where in the space to read or write
* BitWidth - Field width in bits (8, 16, or 32)
* Value - Pointer to in or out value
* HandlerContext - Pointer to Handler's context
* RegionContext - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the CMOS address space (Op Region)
*
******************************************************************************/
ACPI_STATUS
AcpiExCmosSpaceHandler (
UINT32 Function,
ACPI_PHYSICAL_ADDRESS Address,
UINT32 BitWidth,
UINT64 *Value,
void *HandlerContext,
void *RegionContext)
{
ACPI_STATUS Status = AE_OK;
ACPI_FUNCTION_TRACE (ExCmosSpaceHandler);
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExPciBarSpaceHandler
*
* PARAMETERS: Function - Read or Write operation
* Address - Where in the space to read or write
* BitWidth - Field width in bits (8, 16, or 32)
* Value - Pointer to in or out value
* HandlerContext - Pointer to Handler's context
* RegionContext - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the PCI BarTarget address space (Op Region)
*
******************************************************************************/
ACPI_STATUS
AcpiExPciBarSpaceHandler (
UINT32 Function,
ACPI_PHYSICAL_ADDRESS Address,
UINT32 BitWidth,
UINT64 *Value,
void *HandlerContext,
void *RegionContext)
{
ACPI_STATUS Status = AE_OK;
ACPI_FUNCTION_TRACE (ExPciBarSpaceHandler);
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExDataTableSpaceHandler
*
* PARAMETERS: Function - Read or Write operation
* Address - Where in the space to read or write
* BitWidth - Field width in bits (8, 16, or 32)
* Value - Pointer to in or out value
* HandlerContext - Pointer to Handler's context
* RegionContext - Pointer to context specific to the
* accessed region
*
* RETURN: Status
*
* DESCRIPTION: Handler for the Data Table address space (Op Region)
*
******************************************************************************/
ACPI_STATUS
AcpiExDataTableSpaceHandler (
UINT32 Function,
ACPI_PHYSICAL_ADDRESS Address,
UINT32 BitWidth,
UINT64 *Value,
void *HandlerContext,
void *RegionContext)
{
ACPI_FUNCTION_TRACE (ExDataTableSpaceHandler);
/*
* Perform the memory read or write. The BitWidth was already
* validated.
*/
switch (Function)
{
case ACPI_READ:
ACPI_MEMCPY (ACPI_CAST_PTR (char, Value), ACPI_PHYSADDR_TO_PTR (Address),
ACPI_DIV_8 (BitWidth));
break;
case ACPI_WRITE:
ACPI_MEMCPY (ACPI_PHYSADDR_TO_PTR (Address), ACPI_CAST_PTR (char, Value),
ACPI_DIV_8 (BitWidth));
break;
default:
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
return_ACPI_STATUS (AE_OK);
}