Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urtw/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/ip_input/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/uslcom/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/bridge/@/contrib/octeon-sdk/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/usb/urtw/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/ip_input/@/amd64/compile/hs32/modules/usr/src/sys/modules/usb/uslcom/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/bridge/@/contrib/octeon-sdk/cvmx-wqe.h |
/***********************license start*************** * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights * reserved. * * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * * Neither the name of Cavium Networks nor the names of * its contributors may be used to endorse or promote products * derived from this software without specific prior written * permission. * This Software, including technical data, may be subject to U.S. export control * laws, including the U.S. Export Administration Act and its associated * regulations, and may be subject to export or import regulations in other * countries. * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. ***********************license end**************************************/ /** * @file * * This header file defines the work queue entry (wqe) data structure. * Since this is a commonly used structure that depends on structures * from several hardware blocks, those definitions have been placed * in this file to create a single point of definition of the wqe * format. * Data structures are still named according to the block that they * relate to. * * This file must not depend on any other header files, except for cvmx.h!!! * * * <hr>$Revision: 49448 $<hr> * * */ #ifndef __CVMX_WQE_H__ #define __CVMX_WQE_H__ #ifdef __cplusplus extern "C" { #endif #define OCT_TAG_TYPE_STRING(x) (((x) == CVMX_POW_TAG_TYPE_ORDERED) ? "ORDERED" : \ (((x) == CVMX_POW_TAG_TYPE_ATOMIC) ? "ATOMIC" : \ (((x) == CVMX_POW_TAG_TYPE_NULL) ? "NULL" : \ "NULL_NULL"))) /** * HW decode / err_code in work queue entry */ typedef union { uint64_t u64; /** Use this struct if the hardware determines that the packet is IP */ struct { uint64_t bufs : 8; /**< HW sets this to the number of buffers used by this packet */ uint64_t ip_offset : 8; /**< HW sets to the number of L2 bytes prior to the IP */ uint64_t vlan_valid : 1; /**< set to 1 if we found DSA/VLAN in the L2 */ uint64_t vlan_stacked : 1; /**< Set to 1 if the DSA/VLAN tag is stacked */ uint64_t unassigned : 1; uint64_t vlan_cfi : 1; /**< HW sets to the DSA/VLAN CFI flag (valid when vlan_valid) */ uint64_t vlan_id :12; /**< HW sets to the DSA/VLAN_ID field (valid when vlan_valid) */ uint64_t pr : 4; /**< Ring Identifier (if PCIe). Requires PIP_GBL_CTL[RING_EN]=1 */ uint64_t unassigned2 : 8; uint64_t dec_ipcomp : 1; /**< the packet needs to be decompressed */ uint64_t tcp_or_udp : 1; /**< the packet is either TCP or UDP */ uint64_t dec_ipsec : 1; /**< the packet needs to be decrypted (ESP or AH) */ uint64_t is_v6 : 1; /**< the packet is IPv6 */ /* (rcv_error, not_IP, IP_exc, is_frag, L4_error, software, etc.) */ uint64_t software : 1; /**< reserved for software use, hardware will clear on packet creation */ /* exceptional conditions below */ uint64_t L4_error : 1; /**< the receive interface hardware detected an L4 error (only applies if !is_frag) (only applies if !rcv_error && !not_IP && !IP_exc && !is_frag) failure indicated in err_code below, decode: - 1 = Malformed L4 - 2 = L4 Checksum Error: the L4 checksum value is - 3 = UDP Length Error: The UDP length field would make the UDP data longer than what remains in the IP packet (as defined by the IP header length field). - 4 = Bad L4 Port: either the source or destination TCP/UDP port is 0. - 8 = TCP FIN Only: the packet is TCP and only the FIN flag set. - 9 = TCP No Flags: the packet is TCP and no flags are set. - 10 = TCP FIN RST: the packet is TCP and both FIN and RST are set. - 11 = TCP SYN URG: the packet is TCP and both SYN and URG are set. - 12 = TCP SYN RST: the packet is TCP and both SYN and RST are set. - 13 = TCP SYN FIN: the packet is TCP and both SYN and FIN are set. */ uint64_t is_frag : 1; /**< set if the packet is a fragment */ uint64_t IP_exc : 1; /**< the receive interface hardware detected an IP error / exception (only applies if !rcv_error && !not_IP) failure indicated in err_code below, decode: - 1 = Not IP: the IP version field is neither 4 nor 6. - 2 = IPv4 Header Checksum Error: the IPv4 header has a checksum violation. - 3 = IP Malformed Header: the packet is not long enough to contain the IP header. - 4 = IP Malformed: the packet is not long enough to contain the bytes indicated by the IP header. Pad is allowed. - 5 = IP TTL Hop: the IPv4 TTL field or the IPv6 Hop Count field are zero. - 6 = IP Options */ uint64_t is_bcast : 1; /**< set if the hardware determined that the packet is a broadcast */ uint64_t is_mcast : 1; /**< set if the hardware determined that the packet is a multi-cast */ uint64_t not_IP : 1; /**< set if the packet may not be IP (must be zero in this case) */ uint64_t rcv_error : 1; /**< the receive interface hardware detected a receive error (must be zero in this case) */ /* lower err_code = first-level descriptor of the work */ /* zero for packet submitted by hardware that isn't on the slow path */ uint64_t err_code : 8; /**< type is cvmx_pip_err_t */ } s; /**< use this to get at the 16 vlan bits */ struct { uint64_t unused1 :16; uint64_t vlan :16; uint64_t unused2 :32; } svlan; /**< use this struct if the hardware could not determine that the packet is ip */ struct { uint64_t bufs : 8; /**< HW sets this to the number of buffers used by this packet */ uint64_t unused : 8; uint64_t vlan_valid : 1; /**< set to 1 if we found DSA/VLAN in the L2 */ uint64_t vlan_stacked : 1; /**< Set to 1 if the DSA/VLAN tag is stacked */ uint64_t unassigned : 1; uint64_t vlan_cfi : 1; /**< HW sets to the DSA/VLAN CFI flag (valid when vlan_valid) */ uint64_t vlan_id :12; /**< HW sets to the DSA/VLAN_ID field (valid when vlan_valid) */ uint64_t pr : 4; /**< Ring Identifier (if PCIe). Requires PIP_GBL_CTL[RING_EN]=1 */ uint64_t unassigned2 :12; uint64_t software : 1; /**< reserved for software use, hardware will clear on packet creation */ uint64_t unassigned3 : 1; uint64_t is_rarp : 1; /**< set if the hardware determined that the packet is rarp */ uint64_t is_arp : 1; /**< set if the hardware determined that the packet is arp */ uint64_t is_bcast : 1; /**< set if the hardware determined that the packet is a broadcast */ uint64_t is_mcast : 1; /**< set if the hardware determined that the packet is a multi-cast */ uint64_t not_IP : 1; /**< set if the packet may not be IP (must be one in this case) */ uint64_t rcv_error : 1; /**< the receive interface hardware detected a receive error. Failure indicated in err_code below, decode: - 1 = partial error: a packet was partially received, but internal buffering / bandwidth was not adequate to receive the entire packet. - 2 = jabber error: the RGMII packet was too large and is truncated. - 3 = overrun error: the RGMII packet is longer than allowed and had an FCS error. - 4 = oversize error: the RGMII packet is longer than allowed. - 5 = alignment error: the RGMII packet is not an integer number of bytes and had an FCS error (100M and 10M only). - 6 = fragment error: the RGMII packet is shorter than allowed and had an FCS error. - 7 = GMX FCS error: the RGMII packet had an FCS error. - 8 = undersize error: the RGMII packet is shorter than allowed. - 9 = extend error: the RGMII packet had an extend error. - 10 = length mismatch error: the RGMII packet had a length that did not match the length field in the L2 HDR. - 11 = RGMII RX error/SPI4 DIP4 Error: the RGMII packet had one or more data reception errors (RXERR) or the SPI4 packet had one or more DIP4 errors. - 12 = RGMII skip error/SPI4 Abort Error: the RGMII packet was not large enough to cover the skipped bytes or the SPI4 packet was terminated with an About EOPS. - 13 = RGMII nibble error/SPI4 Port NXA Error: the RGMII packet had a studder error (data not repeated - 10/100M only) or the SPI4 packet was sent to an NXA. - 16 = FCS error: a SPI4.2 packet had an FCS error. - 17 = Skip error: a packet was not large enough to cover the skipped bytes. - 18 = L2 header malformed: the packet is not long enough to contain the L2 */ /* lower err_code = first-level descriptor of the work */ /* zero for packet submitted by hardware that isn't on the slow path */ uint64_t err_code : 8; /* type is cvmx_pip_err_t (union, so can't use directly */ } snoip; } cvmx_pip_wqe_word2; /** * Work queue entry format * * must be 8-byte aligned */ typedef struct { /***************************************************************** * WORD 0 * HW WRITE: the following 64 bits are filled by HW when a packet arrives */ /** * raw chksum result generated by the HW */ uint16_t hw_chksum; /** * Field unused by hardware - available for software */ uint8_t unused; /** * Next pointer used by hardware for list maintenance. * May be written/read by HW before the work queue * entry is scheduled to a PP * (Only 36 bits used in Octeon 1) */ uint64_t next_ptr : 40; /***************************************************************** * WORD 1 * HW WRITE: the following 64 bits are filled by HW when a packet arrives */ /** * HW sets to the total number of bytes in the packet */ uint64_t len :16; /** * HW sets this to input physical port */ uint64_t ipprt : 6; /** * HW sets this to what it thought the priority of the input packet was */ uint64_t qos : 3; /** * the group that the work queue entry will be scheduled to */ uint64_t grp : 4; /** * the type of the tag (ORDERED, ATOMIC, NULL) */ cvmx_pow_tag_type_t tag_type : 3; /** * the synchronization/ordering tag */ uint64_t tag :32; /** * WORD 2 * HW WRITE: the following 64-bits are filled in by hardware when a packet arrives * This indicates a variety of status and error conditions. */ cvmx_pip_wqe_word2 word2; /** * Pointer to the first segment of the packet. */ cvmx_buf_ptr_t packet_ptr; /** * HW WRITE: octeon will fill in a programmable amount from the * packet, up to (at most, but perhaps less) the amount * needed to fill the work queue entry to 128 bytes * If the packet is recognized to be IP, the hardware starts (except that * the IPv4 header is padded for appropriate alignment) writing here where * the IP header starts. * If the packet is not recognized to be IP, the hardware starts writing * the beginning of the packet here. */ uint8_t packet_data[96]; /** * If desired, SW can make the work Q entry any length. For the * purposes of discussion here, Assume 128B always, as this is all that * the hardware deals with. * */ } CVMX_CACHE_LINE_ALIGNED cvmx_wqe_t; #ifdef __cplusplus } #endif #endif /* __CVMX_WQE_H__ */