| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/vpo/@/dev/iwi/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/vpo/@/dev/iwi/if_iwivar.h |
/* $FreeBSD: release/9.1.0/sys/dev/iwi/if_iwivar.h 213729 2010-10-12 16:52:13Z bschmidt $ */
/*-
* Copyright (c) 2004, 2005
* Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
struct iwi_rx_radiotap_header {
struct ieee80211_radiotap_header wr_ihdr;
uint8_t wr_flags;
uint8_t wr_rate;
uint16_t wr_chan_freq;
uint16_t wr_chan_flags;
int8_t wr_antsignal;
int8_t wr_antnoise;
uint8_t wr_antenna;
};
#define IWI_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \
(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | \
(1 << IEEE80211_RADIOTAP_ANTENNA))
struct iwi_tx_radiotap_header {
struct ieee80211_radiotap_header wt_ihdr;
uint8_t wt_flags;
uint16_t wt_chan_freq;
uint16_t wt_chan_flags;
};
#define IWI_TX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_CHANNEL))
struct iwi_cmd_ring {
bus_dma_tag_t desc_dmat;
bus_dmamap_t desc_map;
bus_addr_t physaddr;
struct iwi_cmd_desc *desc;
int count;
int queued;
int cur;
int next;
};
struct iwi_tx_data {
bus_dmamap_t map;
struct mbuf *m;
struct ieee80211_node *ni;
};
struct iwi_tx_ring {
bus_dma_tag_t desc_dmat;
bus_dma_tag_t data_dmat;
bus_dmamap_t desc_map;
bus_addr_t physaddr;
bus_addr_t csr_ridx;
bus_addr_t csr_widx;
struct iwi_tx_desc *desc;
struct iwi_tx_data *data;
int count;
int queued;
int cur;
int next;
};
struct iwi_rx_data {
bus_dmamap_t map;
bus_addr_t physaddr;
uint32_t reg;
struct mbuf *m;
};
struct iwi_rx_ring {
bus_dma_tag_t data_dmat;
struct iwi_rx_data *data;
int count;
int cur;
};
struct iwi_node {
struct ieee80211_node in_node;
int in_station;
#define IWI_MAX_IBSSNODE 32
};
struct iwi_fw {
const struct firmware *fp; /* image handle */
const char *data; /* firmware image data */
size_t size; /* firmware image size */
const char *name; /* associated image name */
};
struct iwi_vap {
struct ieee80211vap iwi_vap;
int (*iwi_newstate)(struct ieee80211vap *,
enum ieee80211_state, int);
};
#define IWI_VAP(vap) ((struct iwi_vap *)(vap))
struct iwi_softc {
struct ifnet *sc_ifp;
void (*sc_node_free)(struct ieee80211_node *);
device_t sc_dev;
struct mtx sc_mtx;
uint8_t sc_mcast[IEEE80211_ADDR_LEN];
struct unrhdr *sc_unr;
uint32_t flags;
#define IWI_FLAG_FW_INITED (1 << 0)
#define IWI_FLAG_BUSY (1 << 3) /* busy sending a command */
#define IWI_FLAG_ASSOCIATED (1 << 4) /* currently associated */
#define IWI_FLAG_CHANNEL_SCAN (1 << 5)
uint32_t fw_state;
#define IWI_FW_IDLE 0
#define IWI_FW_LOADING 1
#define IWI_FW_ASSOCIATING 2
#define IWI_FW_DISASSOCIATING 3
#define IWI_FW_SCANNING 4
struct iwi_cmd_ring cmdq;
struct iwi_tx_ring txq[WME_NUM_AC];
struct iwi_rx_ring rxq;
struct resource *irq;
struct resource *mem;
bus_space_tag_t sc_st;
bus_space_handle_t sc_sh;
void *sc_ih;
int mem_rid;
int irq_rid;
/*
* The card needs external firmware images to work, which is made of a
* bootloader, microcode and firmware proper. In version 3.00 and
* above, all pieces are contained in a single image, preceded by a
* struct iwi_firmware_hdr indicating the size of the 3 pieces.
* Old firmware < 3.0 has separate boot and ucode, so we need to
* load all of them explicitly.
* To avoid issues related to fragmentation, we keep the block of
* dma-ble memory around until detach time, and reallocate it when
* it becomes too small. fw_dma_size is the size currently allocated.
*/
int fw_dma_size;
uint32_t fw_flags; /* allocation status */
#define IWI_FW_HAVE_DMAT 0x01
#define IWI_FW_HAVE_MAP 0x02
#define IWI_FW_HAVE_PHY 0x04
bus_dma_tag_t fw_dmat;
bus_dmamap_t fw_map;
bus_addr_t fw_physaddr;
void *fw_virtaddr;
enum ieee80211_opmode fw_mode; /* mode of current firmware */
struct iwi_fw fw_boot; /* boot firmware */
struct iwi_fw fw_uc; /* microcode */
struct iwi_fw fw_fw; /* operating mode support */
int curchan; /* current h/w channel # */
int antenna;
int bluetooth;
struct iwi_associate assoc;
struct iwi_wme_params wme[3];
u_int sc_scangen;
struct task sc_radiontask; /* radio on processing */
struct task sc_radiofftask; /* radio off processing */
struct task sc_restarttask; /* restart adapter processing */
struct task sc_disassoctask;
struct task sc_wmetask; /* set wme parameters */
struct task sc_monitortask;
unsigned int sc_softled : 1, /* enable LED gpio status */
sc_ledstate: 1, /* LED on/off state */
sc_blinking: 1; /* LED blink operation active */
u_int sc_nictype; /* NIC type from EEPROM */
u_int sc_ledpin; /* mask for activity LED */
u_int sc_ledidle; /* idle polling interval */
int sc_ledevent; /* time of last LED event */
u_int8_t sc_rxrate; /* current rx rate for LED */
u_int8_t sc_rxrix;
u_int8_t sc_txrate; /* current tx rate for LED */
u_int8_t sc_txrix;
u_int16_t sc_ledoff; /* off time for current blink */
struct callout sc_ledtimer; /* led off timer */
struct callout sc_wdtimer; /* watchdog timer */
struct callout sc_rftimer; /* rfkill timer */
int sc_tx_timer;
int sc_state_timer; /* firmware state timer */
int sc_busy_timer; /* firmware cmd timer */
struct iwi_rx_radiotap_header sc_rxtap;
struct iwi_tx_radiotap_header sc_txtap;
};
#define IWI_STATE_BEGIN(_sc, _state) do { \
KASSERT(_sc->fw_state == IWI_FW_IDLE, \
("iwi firmware not idle, state %s", iwi_fw_states[_sc->fw_state]));\
_sc->fw_state = _state; \
_sc->sc_state_timer = 5; \
DPRINTF(("enter %s state\n", iwi_fw_states[_state])); \
} while (0)
#define IWI_STATE_END(_sc, _state) do { \
if (_sc->fw_state == _state) \
DPRINTF(("exit %s state\n", iwi_fw_states[_state])); \
else \
DPRINTF(("expected %s state, got %s\n", \
iwi_fw_states[_state], iwi_fw_states[_sc->fw_state])); \
_sc->fw_state = IWI_FW_IDLE; \
wakeup(_sc); \
_sc->sc_state_timer = 0; \
} while (0)
/*
* NB.: This models the only instance of async locking in iwi_init_locked
* and must be kept in sync.
*/
#define IWI_LOCK_INIT(sc) \
mtx_init(&(sc)->sc_mtx, device_get_nameunit((sc)->sc_dev), \
MTX_NETWORK_LOCK, MTX_DEF)
#define IWI_LOCK_DESTROY(sc) mtx_destroy(&(sc)->sc_mtx)
#define IWI_LOCK_DECL int __waslocked = 0
#define IWI_LOCK_ASSERT(sc) mtx_assert(&(sc)->sc_mtx, MA_OWNED)
#define IWI_LOCK(sc) do { \
if (!(__waslocked = mtx_owned(&(sc)->sc_mtx))) \
mtx_lock(&(sc)->sc_mtx); \
} while (0)
#define IWI_UNLOCK(sc) do { \
if (!__waslocked) \
mtx_unlock(&(sc)->sc_mtx); \
} while (0)