| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/xl/@/contrib/dev/acpica/debugger/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/xl/@/contrib/dev/acpica/debugger/dbxface.c |
/*******************************************************************************
*
* Module Name: dbxface - AML Debugger external interfaces
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/amlcode.h>
#include <contrib/dev/acpica/include/acdebug.h>
#include <contrib/dev/acpica/include/acdisasm.h>
#ifdef ACPI_DEBUGGER
#define _COMPONENT ACPI_CA_DEBUGGER
ACPI_MODULE_NAME ("dbxface")
/* Local prototypes */
static ACPI_STATUS
AcpiDbStartCommand (
ACPI_WALK_STATE *WalkState,
ACPI_PARSE_OBJECT *Op);
#ifdef ACPI_OBSOLETE_FUNCTIONS
void
AcpiDbMethodEnd (
ACPI_WALK_STATE *WalkState);
#endif
/*******************************************************************************
*
* FUNCTION: AcpiDbStartCommand
*
* PARAMETERS: WalkState - Current walk
* Op - Current executing Op, from AML interpreter
*
* RETURN: Status
*
* DESCRIPTION: Enter debugger command loop
*
******************************************************************************/
static ACPI_STATUS
AcpiDbStartCommand (
ACPI_WALK_STATE *WalkState,
ACPI_PARSE_OBJECT *Op)
{
ACPI_STATUS Status;
/* TBD: [Investigate] are there namespace locking issues here? */
/* AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); */
/* Go into the command loop and await next user command */
AcpiGbl_MethodExecuting = TRUE;
Status = AE_CTRL_TRUE;
while (Status == AE_CTRL_TRUE)
{
if (AcpiGbl_DebuggerConfiguration == DEBUGGER_MULTI_THREADED)
{
/* Handshake with the front-end that gets user command lines */
Status = AcpiUtReleaseMutex (ACPI_MTX_DEBUG_CMD_COMPLETE);
if (ACPI_FAILURE (Status))
{
return (Status);
}
Status = AcpiUtAcquireMutex (ACPI_MTX_DEBUG_CMD_READY);
if (ACPI_FAILURE (Status))
{
return (Status);
}
}
else
{
/* Single threaded, we must get a command line ourselves */
/* Force output to console until a command is entered */
AcpiDbSetOutputDestination (ACPI_DB_CONSOLE_OUTPUT);
/* Different prompt if method is executing */
if (!AcpiGbl_MethodExecuting)
{
AcpiOsPrintf ("%1c ", ACPI_DEBUGGER_COMMAND_PROMPT);
}
else
{
AcpiOsPrintf ("%1c ", ACPI_DEBUGGER_EXECUTE_PROMPT);
}
/* Get the user input line */
Status = AcpiOsGetLine (AcpiGbl_DbLineBuf,
ACPI_DB_LINE_BUFFER_SIZE, NULL);
if (ACPI_FAILURE (Status))
{
ACPI_EXCEPTION ((AE_INFO, Status, "While parsing command line"));
return (Status);
}
}
Status = AcpiDbCommandDispatch (AcpiGbl_DbLineBuf, WalkState, Op);
}
/* AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); */
return (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDbSingleStep
*
* PARAMETERS: WalkState - Current walk
* Op - Current executing op (from aml interpreter)
* OpcodeClass - Class of the current AML Opcode
*
* RETURN: Status
*
* DESCRIPTION: Called just before execution of an AML opcode.
*
******************************************************************************/
ACPI_STATUS
AcpiDbSingleStep (
ACPI_WALK_STATE *WalkState,
ACPI_PARSE_OBJECT *Op,
UINT32 OpcodeClass)
{
ACPI_PARSE_OBJECT *Next;
ACPI_STATUS Status = AE_OK;
UINT32 OriginalDebugLevel;
ACPI_PARSE_OBJECT *DisplayOp;
ACPI_PARSE_OBJECT *ParentOp;
ACPI_FUNCTION_ENTRY ();
/* Check the abort flag */
if (AcpiGbl_AbortMethod)
{
AcpiGbl_AbortMethod = FALSE;
return (AE_ABORT_METHOD);
}
/* Check for single-step breakpoint */
if (WalkState->MethodBreakpoint &&
(WalkState->MethodBreakpoint <= Op->Common.AmlOffset))
{
/* Check if the breakpoint has been reached or passed */
/* Hit the breakpoint, resume single step, reset breakpoint */
AcpiOsPrintf ("***Break*** at AML offset %X\n", Op->Common.AmlOffset);
AcpiGbl_CmSingleStep = TRUE;
AcpiGbl_StepToNextCall = FALSE;
WalkState->MethodBreakpoint = 0;
}
/* Check for user breakpoint (Must be on exact Aml offset) */
else if (WalkState->UserBreakpoint &&
(WalkState->UserBreakpoint == Op->Common.AmlOffset))
{
AcpiOsPrintf ("***UserBreakpoint*** at AML offset %X\n",
Op->Common.AmlOffset);
AcpiGbl_CmSingleStep = TRUE;
AcpiGbl_StepToNextCall = FALSE;
WalkState->MethodBreakpoint = 0;
}
/*
* Check if this is an opcode that we are interested in --
* namely, opcodes that have arguments
*/
if (Op->Common.AmlOpcode == AML_INT_NAMEDFIELD_OP)
{
return (AE_OK);
}
switch (OpcodeClass)
{
case AML_CLASS_UNKNOWN:
case AML_CLASS_ARGUMENT: /* constants, literals, etc. do nothing */
return (AE_OK);
default:
/* All other opcodes -- continue */
break;
}
/*
* Under certain debug conditions, display this opcode and its operands
*/
if ((AcpiGbl_DbOutputToFile) ||
(AcpiGbl_CmSingleStep) ||
(AcpiDbgLevel & ACPI_LV_PARSE))
{
if ((AcpiGbl_DbOutputToFile) ||
(AcpiDbgLevel & ACPI_LV_PARSE))
{
AcpiOsPrintf ("\n[AmlDebug] Next AML Opcode to execute:\n");
}
/*
* Display this op (and only this op - zero out the NEXT field
* temporarily, and disable parser trace output for the duration of
* the display because we don't want the extraneous debug output)
*/
OriginalDebugLevel = AcpiDbgLevel;
AcpiDbgLevel &= ~(ACPI_LV_PARSE | ACPI_LV_FUNCTIONS);
Next = Op->Common.Next;
Op->Common.Next = NULL;
DisplayOp = Op;
ParentOp = Op->Common.Parent;
if (ParentOp)
{
if ((WalkState->ControlState) &&
(WalkState->ControlState->Common.State ==
ACPI_CONTROL_PREDICATE_EXECUTING))
{
/*
* We are executing the predicate of an IF or WHILE statement
* Search upwards for the containing IF or WHILE so that the
* entire predicate can be displayed.
*/
while (ParentOp)
{
if ((ParentOp->Common.AmlOpcode == AML_IF_OP) ||
(ParentOp->Common.AmlOpcode == AML_WHILE_OP))
{
DisplayOp = ParentOp;
break;
}
ParentOp = ParentOp->Common.Parent;
}
}
else
{
while (ParentOp)
{
if ((ParentOp->Common.AmlOpcode == AML_IF_OP) ||
(ParentOp->Common.AmlOpcode == AML_ELSE_OP) ||
(ParentOp->Common.AmlOpcode == AML_SCOPE_OP) ||
(ParentOp->Common.AmlOpcode == AML_METHOD_OP) ||
(ParentOp->Common.AmlOpcode == AML_WHILE_OP))
{
break;
}
DisplayOp = ParentOp;
ParentOp = ParentOp->Common.Parent;
}
}
}
/* Now we can display it */
#ifdef ACPI_DISASSEMBLER
AcpiDmDisassemble (WalkState, DisplayOp, ACPI_UINT32_MAX);
#endif
if ((Op->Common.AmlOpcode == AML_IF_OP) ||
(Op->Common.AmlOpcode == AML_WHILE_OP))
{
if (WalkState->ControlState->Common.Value)
{
AcpiOsPrintf ("Predicate = [True], IF block was executed\n");
}
else
{
AcpiOsPrintf ("Predicate = [False], Skipping IF block\n");
}
}
else if (Op->Common.AmlOpcode == AML_ELSE_OP)
{
AcpiOsPrintf ("Predicate = [False], ELSE block was executed\n");
}
/* Restore everything */
Op->Common.Next = Next;
AcpiOsPrintf ("\n");
if ((AcpiGbl_DbOutputToFile) ||
(AcpiDbgLevel & ACPI_LV_PARSE))
{
AcpiOsPrintf ("\n");
}
AcpiDbgLevel = OriginalDebugLevel;
}
/* If we are not single stepping, just continue executing the method */
if (!AcpiGbl_CmSingleStep)
{
return (AE_OK);
}
/*
* If we are executing a step-to-call command,
* Check if this is a method call.
*/
if (AcpiGbl_StepToNextCall)
{
if (Op->Common.AmlOpcode != AML_INT_METHODCALL_OP)
{
/* Not a method call, just keep executing */
return (AE_OK);
}
/* Found a method call, stop executing */
AcpiGbl_StepToNextCall = FALSE;
}
/*
* If the next opcode is a method call, we will "step over" it
* by default.
*/
if (Op->Common.AmlOpcode == AML_INT_METHODCALL_OP)
{
/* Force no more single stepping while executing called method */
AcpiGbl_CmSingleStep = FALSE;
/*
* Set the breakpoint on/before the call, it will stop execution
* as soon as we return
*/
WalkState->MethodBreakpoint = 1; /* Must be non-zero! */
}
Status = AcpiDbStartCommand (WalkState, Op);
/* User commands complete, continue execution of the interrupted method */
return (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDbInitialize
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Init and start debugger
*
******************************************************************************/
ACPI_STATUS
AcpiDbInitialize (
void)
{
ACPI_STATUS Status;
/* Init globals */
AcpiGbl_DbBuffer = NULL;
AcpiGbl_DbFilename = NULL;
AcpiGbl_DbOutputToFile = FALSE;
AcpiGbl_DbDebugLevel = ACPI_LV_VERBOSITY2;
AcpiGbl_DbConsoleDebugLevel = ACPI_NORMAL_DEFAULT | ACPI_LV_TABLES;
AcpiGbl_DbOutputFlags = ACPI_DB_CONSOLE_OUTPUT;
AcpiGbl_DbOpt_tables = FALSE;
AcpiGbl_DbOpt_stats = FALSE;
#ifdef ACPI_DISASSEMBLER
AcpiGbl_DbOpt_disasm = FALSE;
AcpiGbl_DbOpt_verbose = TRUE;
#endif
AcpiGbl_DbOpt_ini_methods = TRUE;
AcpiGbl_DbBuffer = AcpiOsAllocate (ACPI_DEBUG_BUFFER_SIZE);
if (!AcpiGbl_DbBuffer)
{
return (AE_NO_MEMORY);
}
ACPI_MEMSET (AcpiGbl_DbBuffer, 0, ACPI_DEBUG_BUFFER_SIZE);
/* Initial scope is the root */
AcpiGbl_DbScopeBuf [0] = '\\';
AcpiGbl_DbScopeBuf [1] = 0;
AcpiGbl_DbScopeNode = AcpiGbl_RootNode;
/*
* If configured for multi-thread support, the debug executor runs in
* a separate thread so that the front end can be in another address
* space, environment, or even another machine.
*/
if (AcpiGbl_DebuggerConfiguration & DEBUGGER_MULTI_THREADED)
{
/* These were created with one unit, grab it */
Status = AcpiUtAcquireMutex (ACPI_MTX_DEBUG_CMD_COMPLETE);
if (ACPI_FAILURE (Status))
{
AcpiOsPrintf ("Could not get debugger mutex\n");
return (Status);
}
Status = AcpiUtAcquireMutex (ACPI_MTX_DEBUG_CMD_READY);
if (ACPI_FAILURE (Status))
{
AcpiOsPrintf ("Could not get debugger mutex\n");
return (Status);
}
/* Create the debug execution thread to execute commands */
Status = AcpiOsExecute (OSL_DEBUGGER_THREAD, AcpiDbExecuteThread, NULL);
if (ACPI_FAILURE (Status))
{
AcpiOsPrintf ("Could not start debugger thread\n");
return (Status);
}
}
#ifdef ACPI_DISASSEMBLER
if (!AcpiGbl_DbOpt_verbose)
{
AcpiGbl_DbOpt_disasm = TRUE;
AcpiGbl_DbOpt_stats = FALSE;
}
#endif
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AcpiDbTerminate
*
* PARAMETERS: None
*
* RETURN: None
*
* DESCRIPTION: Stop debugger
*
******************************************************************************/
void
AcpiDbTerminate (
void)
{
if (AcpiGbl_DbBuffer)
{
AcpiOsFree (AcpiGbl_DbBuffer);
}
}
#ifdef ACPI_OBSOLETE_FUNCTIONS
/*******************************************************************************
*
* FUNCTION: AcpiDbMethodEnd
*
* PARAMETERS: WalkState - Current walk
*
* RETURN: Status
*
* DESCRIPTION: Called at method termination
*
******************************************************************************/
void
AcpiDbMethodEnd (
ACPI_WALK_STATE *WalkState)
{
if (!AcpiGbl_CmSingleStep)
{
return;
}
AcpiOsPrintf ("<Method Terminating>\n");
AcpiDbStartCommand (WalkState, NULL);
}
#endif
#endif /* ACPI_DEBUGGER */