config root man

Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/xl/@/dev/isci/scil/

FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64
Upload File :
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/xl/@/dev/isci/scil/sci_controller_constants.h

/*-
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD: release/9.1.0/sys/dev/isci/scil/sci_controller_constants.h 231689 2012-02-14 15:58:49Z jimharris $
 */
#ifndef _SCI_CONTROLLER_CONSTANTS_H_
#define _SCI_CONTROLLER_CONSTANTS_H_

/**
 * @file
 *
 * @brief This file contains constant values that change based on the type
 *        of core or framework being managed.  These constants are exported
 *        in order to provide the user with information as to the bounds
 *        (i.e. how many) of specific objects.
 */

#ifdef __cplusplus
extern "C" {
#endif // __cplusplus

#ifdef SCIC_SDS_4_ENABLED

#ifndef SCI_MAX_PHYS
/**
 * This constant defines the maximum number of phy objects that can be
 * supported for the SCU Driver Standard (SDS) library.  This is tied
 * directly to silicon capabilities.
 */
#define SCI_MAX_PHYS  (4)
#endif

#ifndef SCI_MAX_PORTS
/**
 * This constant defines the maximum number of port objects that can be
 * supported for the SCU Driver Standard (SDS) library.  This is tied
 * directly to silicon capabilities.
 */
#define SCI_MAX_PORTS SCI_MAX_PHYS
#endif

#ifndef SCI_MIN_SMP_PHYS
/**
 * This constant defines the minimum number of SMP phy objects that
 * can be supported for a single expander level.
 * This was determined by using 36 physical phys and room for 2 virtual
 * phys.
 */
#define SCI_MIN_SMP_PHYS  (38)
#endif

#ifndef SCI_MAX_SMP_PHYS
/**
 * This constant defines the maximum number of SMP phy objects that
 * can be supported for the SCU Driver Standard (SDS) library.
 * This number can be increased if required.
 */
#define SCI_MAX_SMP_PHYS  (384)
#endif

#ifndef SCI_MAX_REMOTE_DEVICES
/**
 * This constant defines the maximum number of remote device objects that
 * can be supported for the SCU Driver Standard (SDS) library.  This is tied
 * directly to silicon capabilities.
 */
#define SCI_MAX_REMOTE_DEVICES (256)
#endif

#ifndef SCI_MIN_REMOTE_DEVICES
/**
 * This constant defines the minimum number of remote device objects that
 * can be supported for the SCU Driver Standard (SDS) library.  This # can
 * be configured for minimum memory environments to any value less than
 * SCI_MAX_REMOTE_DEVICES
 */
#define SCI_MIN_REMOTE_DEVICES (16)
#endif

#ifndef SCI_MAX_IO_REQUESTS
/**
 * This constant defines the maximum number of IO request objects that
 * can be supported for the SCU Driver Standard (SDS) library.  This is tied
 * directly to silicon capabilities.
 */
#define SCI_MAX_IO_REQUESTS (256)
#endif

#ifndef SCI_MIN_IO_REQUESTS
/**
 * This constant defines the minimum number of IO request objects that
 * can be supported for the SCU Driver Standard (SDS) library.  This #
 * can be configured for minimum memory environments to any value less
 * than SCI_MAX_IO_REQUESTS.
 */
#define SCI_MIN_IO_REQUESTS (1)
#endif

#ifndef SCI_MAX_SCATTER_GATHER_ELEMENTS
/**
 * This constant defines the maximum number of Scatter-Gather Elements
 * to be used by any SCI component.
 */
#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130
#endif

#ifndef SCI_MIN_SCATTER_GATHER_ELEMENTS
/**
 * This constant defines the minimum number of Scatter-Gather Elements
 * to be used by any SCI component.
 */
#define SCI_MIN_SCATTER_GATHER_ELEMENTS 1
#endif

#else // SCIC_SDS_4_ENABLED

#error "SCI Core configuration left unspecified (e.g. SCIC_SDS_4_ENABLED)"

#endif // SCIC_SDS_4_ENABLED

/**
 * This constant defines the maximum number of PCI devices that can be supported
 * by the driver.
 */
#define SCI_MAX_PCI_DEVICES (2)

/**
 * This constant defines the maximum number of controllers that can
 * occur in a single silicon package.
 */
#define SCI_MAX_CONTROLLERS_PER_PCI_DEVICE  (2)

/**
 * This constant defines the maximum number of controllers that can
 * be supported by a library object.  The user specified maximum controller
 * count must be less than or equal to this number.  This is a driver
 * specific constant that is not tied to silicon capabilities.
 */
#if !defined(SCI_MAX_CONTROLLERS)
#define SCI_MAX_CONTROLLERS  (2)
#endif

#ifndef SCI_MAX_MSIX_MESSAGES_PER_CONTROLLER
/**
 * This constant defines the maximum number of MSI-X interrupt vectors/messages
 * supported for an SCU hardware controller instance.
 */
#define SCI_MAX_MSIX_MESSAGES_PER_CONTROLLER  (2)
#endif

/**
 * This constant defines the maximum number of MSI-X interrupt vectors/messages
 * supported for an SCU device.
 */
#define SCI_MAX_MSIX_MESSAGES \
    (SCI_MAX_MSIX_MESSAGES_PER_CONTROLLER * SCI_MAX_CONTROLLERS)

/**
 * The maximum number of supported domain objects is currently tied to the
 * maximum number of support port objects.
 */
#define SCI_MAX_DOMAINS  SCI_MAX_PORTS

#ifdef __cplusplus
}
#endif // __cplusplus

#endif // _SCI_CONTROLLER_CONSTANTS_H_


Man Man