config root man

/*-
 * Copyright(c) 2002-2011 Exar Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification are permitted provided the following conditions are met:
 *
 *    1. Redistributions of source code must retain the above copyright notice,
 *       this list of conditions and the following disclaimer.
 *
 *    2. Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *
 *    3. Neither the name of the Exar Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived from
 *       this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */
/*$FreeBSD: release/9.1.0/sys/dev/vxge/vxgehal/vxgehal-ring.h 221167 2011-04-28 14:33:15Z gnn $*/

#ifndef	VXGE_HAL_RING_H
#define	VXGE_HAL_RING_H

__EXTERN_BEGIN_DECLS

typedef u8 vxge_hal_ring_block_t[VXGE_OS_HOST_PAGE_SIZE];

#define	VXGE_HAL_RING_NEXT_BLOCK_POINTER_OFFSET (VXGE_OS_HOST_PAGE_SIZE-8)
#define	VXGE_HAL_RING_MEMBLOCK_IDX_OFFSET	(VXGE_OS_HOST_PAGE_SIZE-16)

/*
 * struct __hal_ring_rxd_priv_t - Receive descriptor HAL-private data.
 * @dma_addr: DMA (mapped) address of _this_ descriptor.
 * @dma_handle: DMA handle used to map the descriptor onto device.
 * @dma_offset: Descriptor's offset in the memory block. HAL allocates
 *		descriptors in memory blocks of %VXGE_OS_HOST_PAGE_SIZE
 *		bytes. Each memblock is contiguous DMA-able memory. Each
 *		memblock contains 1 or more 4KB RxD blocks visible to the
 *		X3100 hardware.
 * @dma_object: DMA address and handle of the memory block that contains
 *		the descriptor. This member is used only in the "checked"
 *		version of the HAL (to enforce certain assertions);
 *		otherwise it gets compiled out.
 * @allocated: True if the descriptor is reserved, 0 otherwise. Internal usage.
 * @db_bytes: Number of doorbell bytes to be posted for this Rxd. This includes
 *		next RxD block pointers
 *
 * Per-receive decsriptor HAL-private data. HAL uses the space to keep DMA
 * information associated with the descriptor. Note that ULD can ask HAL
 * to allocate additional per-descriptor space for its own (ULD-specific)
 * purposes.
 */
typedef struct __hal_ring_rxd_priv_t {
	dma_addr_t		dma_addr;
	pci_dma_h		dma_handle;
	ptrdiff_t		dma_offset;
#if defined(VXGE_DEBUG_ASSERT)
	vxge_hal_mempool_dma_t	*dma_object;
#endif
#if defined(VXGE_OS_MEMORY_CHECK)
	u32			allocated;
#endif
	u32			db_bytes;
} __hal_ring_rxd_priv_t;


/*
 * struct __hal_ring_t - Ring channel.
 * @channel: Channel "base" of this ring, the common part of all HAL
 *	channels.
 * @mempool: Memory pool, the pool from which descriptors get allocated.
 *	(See vxge_hal_mm.h).
 * @config: Ring configuration, part of device configuration
 *	(see vxge_hal_device_config_t {}).
 * @ring_length: Length of the ring
 * @buffer_mode: 1, 3, or 5. The value specifies a receive buffer mode,
 *	as per X3100 User Guide.
 * @indicate_max_pkts: Maximum number of packets processed within a single
 *	interrupt. Can be used to limit the time spent inside hw interrupt.
 * @rxd_size: RxD sizes for 1-, 3- or 5- buffer modes. As per X3100 spec,
 *	1-buffer mode descriptor is 32 byte long, etc.
 * @rxd_priv_size: Per RxD size reserved (by HAL) for ULD to keep per-descriptor
 *		data (e.g., DMA handle for Solaris)
 * @per_rxd_space: Per rxd space requested by ULD
 * @rxds_per_block: Number of descriptors per hardware-defined RxD
 *		block. Depends on the (1-, 3-, 5-) buffer mode.
 * @rxdblock_priv_size: Reserved at the end of each RxD block. HAL internal
 *			usage. Not to confuse with @rxd_priv_size.
 * @rxd_mem_avail: Available RxD memory
 * @db_byte_count: Number of doorbell bytes to be posted
 * @cmpl_cnt: Completion counter. Is reset to zero upon entering the ISR.
 *	Used in conjunction with @indicate_max_pkts.
 * @active_sw_lros: List of Software LRO sessions in progess
 * @active_sw_lro_count: Number of Software LRO sessions in progess
 * @free_sw_lros: List of Software LRO sessions free
 * @free_sw_lro_count: Number of Software LRO sessions free
 * @sw_lro_lock: LRO session lists' lock
 * @callback: Channel completion callback. HAL invokes the callback when there
 *	    are new completions on that channel. In many implementations
 *	    the @callback executes in the hw interrupt context.
 * @rxd_init: Channel's descriptor-initialize callback.
 *	    See vxge_hal_ring_rxd_init_f {}.
 *	    If not NULL, HAL invokes the callback when opening the ring.
 * @rxd_term: Channel's descriptor-terminate callback. If not NULL,
 *	HAL invokes the callback when closing the corresponding channel.
 *	See also vxge_hal_channel_rxd_term_f {}.
 * @stats: Statistics for ring
 * Ring channel.
 *
 * Note: The structure is cache line aligned to better utilize
 *	   CPU cache performance.
 */
typedef struct __hal_ring_t {
	__hal_channel_t				channel;
	vxge_hal_mempool_t			*mempool;
	vxge_hal_ring_config_t			*config;
	u32					ring_length;
	u32					buffer_mode;
	u32					indicate_max_pkts;
	u32					rxd_size;
	u32					rxd_priv_size;
	u32					per_rxd_space;
	u32					rxds_per_block;
	u32					rxdblock_priv_size;
	u32					rxd_mem_avail;
	u32					db_byte_count;
	u32					cmpl_cnt;
	vxge_hal_ring_callback_f		callback;
	vxge_hal_ring_rxd_init_f		rxd_init;
	vxge_hal_ring_rxd_term_f		rxd_term;
	vxge_hal_vpath_stats_sw_ring_info_t *stats;
} __vxge_os_attr_cacheline_aligned __hal_ring_t;

#define	VXGE_HAL_RING_ULD_PRIV(ring, rxdh)				\
	ring->channel.dtr_arr[						\
	    ((vxge_hal_ring_rxd_5_t *)(rxdh))->host_control].uld_priv

#define	VXGE_HAL_RING_HAL_PRIV(ring, rxdh)				\
	((__hal_ring_rxd_priv_t *)(ring->channel.dtr_arr[		\
	    ((vxge_hal_ring_rxd_5_t *)(rxdh))->host_control].hal_priv))

#define	VXGE_HAL_RING_POST_DOORBELL(vph, ringh)				\
{									\
	if (((__hal_ring_t *)(ringh))->config->post_mode ==		\
	    VXGE_HAL_RING_POST_MODE_DOORBELL) {				\
		vxge_hal_ring_rxd_post_post_db(vph);			\
	}								\
}

#define	VXGE_HAL_RING_RXD_INDEX(rxdp)	\
	(u32)((vxge_hal_ring_rxd_5_t *)rxdp)->host_control

/* ========================== RING PRIVATE API ============================ */

u64
__hal_ring_first_block_address_get(
    vxge_hal_ring_h ringh);

vxge_hal_status_e
__hal_ring_create(
    vxge_hal_vpath_h vpath_handle,
    vxge_hal_ring_attr_t *attr);

void
__hal_ring_abort(
    vxge_hal_ring_h ringh,
    vxge_hal_reopen_e reopen);

vxge_hal_status_e
__hal_ring_reset(
    vxge_hal_ring_h ringh);

void
__hal_ring_delete(
    vxge_hal_vpath_h vpath_handle);

vxge_hal_status_e
vxge_hal_ring_initial_replenish(
    __hal_ring_t *ring,
    vxge_hal_reopen_e reopen);

vxge_hal_status_e
__hal_ring_frame_length_set(
    __hal_virtualpath_t *vpath,
    u32 new_frmlen);

__EXTERN_END_DECLS

#endif	/* VXGE_HAL_RING_H */