| Current Path : /sys/boot/arm/at91/libat91/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/boot/arm/at91/libat91/mci_device.h |
/*-
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* This software is derived from software provide by Kwikbyte who specifically
* disclaimed copyright on the code.
*
* $FreeBSD: release/9.1.0/sys/boot/arm/at91/libat91/mci_device.h 164137 2006-11-09 20:32:36Z imp $
*/
//*---------------------------------------------------------------------------
//* ATMEL Microcontroller Software Support - ROUSSET -
//*---------------------------------------------------------------------------
//* The software is delivered "AS IS" without warranty or condition of any
//* kind, either express, implied or statutory. This includes without
//* limitation any warranty or condition with respect to merchantability or
//* fitness for any particular purpose, or against the infringements of
//* intellectual property rights of others.
//*---------------------------------------------------------------------------
//* File Name : AT91C_MCI_Device.h
//* Object : Data Flash Atmel Description File
//* Translator :
//*
//* 1.0 26/11/02 FB : Creation
//*---------------------------------------------------------------------------
#ifndef __MCI_Device_h
#define __MCI_Device_h
#include <sys/types.h>
typedef unsigned int AT91S_MCIDeviceStatus;
///////////////////////////////////////////////////////////////////////////////
#define AT91C_CARD_REMOVED 0
#define AT91C_MMC_CARD_INSERTED 1
#define AT91C_SD_CARD_INSERTED 2
#define AT91C_NO_ARGUMENT 0x0
#define AT91C_FIRST_RCA 0xCAFE
#define AT91C_MAX_MCI_CARDS 10
#define AT91C_BUS_WIDTH_1BIT 0x00
#define AT91C_BUS_WIDTH_4BITS 0x02
/* Driver State */
#define AT91C_MCI_IDLE 0x0
#define AT91C_MCI_TIMEOUT_ERROR 0x1
#define AT91C_MCI_RX_SINGLE_BLOCK 0x2
#define AT91C_MCI_RX_MULTIPLE_BLOCK 0x3
#define AT91C_MCI_RX_STREAM 0x4
#define AT91C_MCI_TX_SINGLE_BLOCK 0x5
#define AT91C_MCI_TX_MULTIPLE_BLOCK 0x6
#define AT91C_MCI_TX_STREAM 0x7
/* TimeOut */
#define AT91C_TIMEOUT_CMDRDY 30
///////////////////////////////////////////////////////////////////////////////
// MMC & SDCard Structures
///////////////////////////////////////////////////////////////////////////////
/*---------------------------------------------*/
/* MCI Device Structure Definition */
/*---------------------------------------------*/
typedef struct _AT91S_MciDevice
{
volatile unsigned char state;
unsigned char SDCard_bus_width;
unsigned int RCA; // RCA
unsigned int READ_BL_LEN;
#ifdef REPORT_SIZE
unsigned int Memory_Capacity;
#endif
} AT91S_MciDevice;
#include <dev/mmc/mmcreg.h>
///////////////////////////////////////////////////////////////////////////////
// Functions returnals
///////////////////////////////////////////////////////////////////////////////
#define AT91C_CMD_SEND_OK 0 // Command ok
#define AT91C_CMD_SEND_ERROR -1 // Command failed
#define AT91C_INIT_OK 2 // Init Successfull
#define AT91C_INIT_ERROR 3 // Init Failed
#define AT91C_READ_OK 4 // Read Successfull
#define AT91C_READ_ERROR 5 // Read Failed
#define AT91C_WRITE_OK 6 // Write Successfull
#define AT91C_WRITE_ERROR 7 // Write Failed
#define AT91C_ERASE_OK 8 // Erase Successfull
#define AT91C_ERASE_ERROR 9 // Erase Failed
#define AT91C_CARD_SELECTED_OK 10 // Card Selection Successfull
#define AT91C_CARD_SELECTED_ERROR 11 // Card Selection Failed
#define AT91C_MCI_SR_ERROR (AT91C_MCI_UNRE | AT91C_MCI_OVRE | AT91C_MCI_DTOE | \
AT91C_MCI_DCRCE | AT91C_MCI_RTOE | AT91C_MCI_RENDE | AT91C_MCI_RCRCE | \
AT91C_MCI_RDIRE | AT91C_MCI_RINDE)
#define MMC_CMDNB (0x1Fu << 0) // Command Number
#define MMC_RSPTYP (0x3u << 6) // Response Type
#define MMC_RSPTYP_NO (0x0u << 6) // No response
#define MMC_RSPTYP_48 (0x1u << 6) // 48-bit response
#define MMC_RSPTYP_136 (0x2u << 6) // 136-bit response
#define MMC_SPCMD (0x7u << 8) // Special CMD
#define MMC_SPCMD_NONE (0x0u << 8) // Not a special CMD
#define MMC_SPCMD_INIT (0x1u << 8) // Initialization CMD
#define MMC_SPCMD_SYNC (0x2u << 8) // Synchronized CMD
#define MMC_SPCMD_IT_CMD (0x4u << 8) // Interrupt command
#define MMC_SPCMD_IT_REP (0x5u << 8) // Interrupt response
#define MMC_OPDCMD (0x1u << 11) // Open Drain Command
#define MMC_MAXLAT (0x1u << 12) // Maximum Latency for Command to respond
#define MMC_TRCMD (0x3u << 16) // Transfer CMD
#define MMC_TRCMD_NO (0x0u << 16) // No transfer
#define MMC_TRCMD_START (0x1u << 16) // Start transfer
#define MMC_TRCMD_STOP (0x2u << 16) // Stop transfer
#define MMC_TRDIR (0x1u << 18) // Transfer Direction
#define MMC_TRTYP (0x3u << 19) // Transfer Type
#define MMC_TRTYP_BLOCK (0x0u << 19) // Block Transfer type
#define MMC_TRTYP_MULTIPLE (0x1u << 19) // Multiple Block transfer type
#define MMC_TRTYP_STREAM (0x2u << 19) // Stream transfer type
///////////////////////////////////////////////////////////////////////////////
// MCI_CMD Register Value
///////////////////////////////////////////////////////////////////////////////
#define POWER_ON_INIT \
(0 | MMC_TRCMD_NO | MMC_SPCMD_INIT | MMC_OPDCMD)
/////////////////////////////////////////////////////////////////
// Class 0 & 1 commands: Basic commands and Read Stream commands
/////////////////////////////////////////////////////////////////
#define GO_IDLE_STATE_CMD \
(0 | MMC_TRCMD_NO | MMC_SPCMD_NONE )
#define MMC_GO_IDLE_STATE_CMD \
(0 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_OPDCMD)
#define MMC_SEND_OP_COND_CMD \
(1 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_48 | \
MMC_OPDCMD)
#define ALL_SEND_CID_CMD \
(2 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_136)
#define MMC_ALL_SEND_CID_CMD \
(2 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_136 | \
MMC_OPDCMD)
#define SET_RELATIVE_ADDR_CMD \
(3 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_48 | \
MMC_MAXLAT)
#define MMC_SET_RELATIVE_ADDR_CMD \
(3 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_48 | \
MMC_MAXLAT | MMC_OPDCMD)
#define SET_DSR_CMD \
(4 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_NO | \
MMC_MAXLAT) // no tested
#define SEL_DESEL_CARD_CMD \
(7 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_48 | \
MMC_MAXLAT)
#define SEND_CSD_CMD \
(9 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_136 | \
MMC_MAXLAT)
#define SEND_CID_CMD \
(10 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_136 | \
MMC_MAXLAT)
#define MMC_READ_DAT_UNTIL_STOP_CMD \
(11 | MMC_TRTYP_STREAM | MMC_SPCMD_NONE | \
MMC_RSPTYP_48 | MMC_TRDIR | MMC_TRCMD_START | \
MMC_MAXLAT)
#define STOP_TRANSMISSION_CMD \
(12 | MMC_TRCMD_STOP | MMC_SPCMD_NONE | MMC_RSPTYP_48 | \
MMC_MAXLAT)
#define STOP_TRANSMISSION_SYNC_CMD \
(12 | MMC_TRCMD_STOP | MMC_SPCMD_SYNC | MMC_RSPTYP_48 | \
MMC_MAXLAT)
#define SEND_STATUS_CMD \
(13 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_48 | \
MMC_MAXLAT)
#define GO_INACTIVE_STATE_CMD \
(15 | MMC_RSPTYP_NO)
//*------------------------------------------------
//* Class 2 commands: Block oriented Read commands
//*------------------------------------------------
#define SET_BLOCKLEN_CMD (16 | MMC_TRCMD_NO | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_MAXLAT )
#define READ_SINGLE_BLOCK_CMD (17 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_START | MMC_TRTYP_BLOCK | MMC_TRDIR | MMC_MAXLAT)
#define READ_MULTIPLE_BLOCK_CMD (18 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_START | MMC_TRTYP_MULTIPLE | MMC_TRDIR | MMC_MAXLAT)
//*--------------------------------------------
//* Class 3 commands: Sequential write commands
//*--------------------------------------------
#define MMC_WRITE_DAT_UNTIL_STOP_CMD (20 | MMC_TRTYP_STREAM| MMC_SPCMD_NONE | MMC_RSPTYP_48 & ~(MMC_TRDIR) | MMC_TRCMD_START | MMC_MAXLAT ) // MMC
//*------------------------------------------------
//* Class 4 commands: Block oriented write commands
//*------------------------------------------------
#define WRITE_BLOCK_CMD (24 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_START | (MMC_TRTYP_BLOCK & ~(MMC_TRDIR)) | MMC_MAXLAT)
#define WRITE_MULTIPLE_BLOCK_CMD (25 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_START | (MMC_TRTYP_MULTIPLE & ~(MMC_TRDIR)) | MMC_MAXLAT)
#define PROGRAM_CSD_CMD (27 | MMC_RSPTYP_48 )
//*----------------------------------------
//* Class 6 commands: Group Write protect
//*----------------------------------------
#define SET_WRITE_PROT_CMD (28 | MMC_RSPTYP_48 )
#define CLR_WRITE_PROT_CMD (29 | MMC_RSPTYP_48 )
#define SEND_WRITE_PROT_CMD (30 | MMC_RSPTYP_48 )
//*----------------------------------------
//* Class 5 commands: Erase commands
//*----------------------------------------
#define TAG_SECTOR_START_CMD (32 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define TAG_SECTOR_END_CMD (33 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define MMC_UNTAG_SECTOR_CMD (34 | MMC_RSPTYP_48 )
#define MMC_TAG_ERASE_GROUP_START_CMD (35 | MMC_RSPTYP_48 )
#define MMC_TAG_ERASE_GROUP_END_CMD (36 | MMC_RSPTYP_48 )
#define MMC_UNTAG_ERASE_GROUP_CMD (37 | MMC_RSPTYP_48 )
#define ERASE_CMD (38 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT )
//*----------------------------------------
//* Class 7 commands: Lock commands
//*----------------------------------------
#define LOCK_UNLOCK (42 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT) // no tested
//*-----------------------------------------------
// Class 8 commands: Application specific commands
//*-----------------------------------------------
#define APP_CMD (55 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define GEN_CMD (56 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT) // no tested
#define SDCARD_SET_BUS_WIDTH_CMD (6 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define SDCARD_STATUS_CMD (13 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define SDCARD_SEND_NUM_WR_BLOCKS_CMD (22 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define SDCARD_SET_WR_BLK_ERASE_COUNT_CMD (23 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define SDCARD_APP_OP_COND_CMD (41 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO )
#define SDCARD_SET_CLR_CARD_DETECT_CMD (42 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define SDCARD_SEND_SCR_CMD (51 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
#define SDCARD_APP_ALL_CMD (SDCARD_SET_BUS_WIDTH_CMD +\
SDCARD_STATUS_CMD +\
SDCARD_SEND_NUM_WR_BLOCKS_CMD +\
SDCARD_SET_WR_BLK_ERASE_COUNT_CMD +\
SDCARD_APP_OP_COND_CMD +\
SDCARD_SET_CLR_CARD_DETECT_CMD +\
SDCARD_SEND_SCR_CMD)
//*----------------------------------------
//* Class 9 commands: IO Mode commands
//*----------------------------------------
#define MMC_FAST_IO_CMD (39 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_MAXLAT)
#define MMC_GO_IRQ_STATE_CMD (40 | MMC_SPCMD_NONE | MMC_RSPTYP_48 | MMC_TRCMD_NO | MMC_MAXLAT)
///////////////////////////////////////////////////////////////////////////////
// OCR Register
///////////////////////////////////////////////////////////////////////////////
#define AT91C_VDD_16_17 (1 << 4)
#define AT91C_VDD_17_18 (1 << 5)
#define AT91C_VDD_18_19 (1 << 6)
#define AT91C_VDD_19_20 (1 << 7)
#define AT91C_VDD_20_21 (1 << 8)
#define AT91C_VDD_21_22 (1 << 9)
#define AT91C_VDD_22_23 (1 << 10)
#define AT91C_VDD_23_24 (1 << 11)
#define AT91C_VDD_24_25 (1 << 12)
#define AT91C_VDD_25_26 (1 << 13)
#define AT91C_VDD_26_27 (1 << 14)
#define AT91C_VDD_27_28 (1 << 15)
#define AT91C_VDD_28_29 (1 << 16)
#define AT91C_VDD_29_30 (1 << 17)
#define AT91C_VDD_30_31 (1 << 18)
#define AT91C_VDD_31_32 (1 << 19)
#define AT91C_VDD_32_33 (1 << 20)
#define AT91C_VDD_33_34 (1 << 21)
#define AT91C_VDD_34_35 (1 << 22)
#define AT91C_VDD_35_36 (1 << 23)
#define AT91C_CARD_POWER_UP_BUSY (1 << 31)
#define AT91C_MMC_HOST_VOLTAGE_RANGE (AT91C_VDD_27_28 | AT91C_VDD_28_29 | \
AT91C_VDD_29_30 | AT91C_VDD_30_31 | AT91C_VDD_31_32 | AT91C_VDD_32_33)
///////////////////////////////////////////////////////////////////////////////
// CURRENT_STATE & READY_FOR_DATA in SDCard Status Register definition (response type R1)
///////////////////////////////////////////////////////////////////////////////
#define AT91C_SR_READY_FOR_DATA (1 << 8) // corresponds to buffer empty signalling on the bus
#define AT91C_SR_IDLE (0 << 9)
#define AT91C_SR_READY (1 << 9)
#define AT91C_SR_IDENT (2 << 9)
#define AT91C_SR_STBY (3 << 9)
#define AT91C_SR_TRAN (4 << 9)
#define AT91C_SR_DATA (5 << 9)
#define AT91C_SR_RCV (6 << 9)
#define AT91C_SR_PRG (7 << 9)
#define AT91C_SR_DIS (8 << 9)
#define AT91C_SR_CARD_SELECTED (AT91C_SR_READY_FOR_DATA + AT91C_SR_TRAN)
#define MMC_FIRST_RCA 0xCAFE
///////////////////////////////////////////////////////////////////////////////
// MMC CSD register header File
// CSD_x_xxx_S for shift value for word x
// CSD_x_xxx_M for mask value for word x
///////////////////////////////////////////////////////////////////////////////
// First Response INT <=> CSD[3] : bits 0 to 31
#define CSD_3_BIT0_S 0 // [0:0]
#define CSD_3_BIT0_M 0x01
#define CSD_3_CRC_S 1 // [7:1]
#define CSD_3_CRC_M 0x7F
#define CSD_3_MMC_ECC_S 8 // [9:8] reserved for MMC compatibility
#define CSD_3_MMC_ECC_M 0x03
#define CSD_3_FILE_FMT_S 10 // [11:10]
#define CSD_3_FILE_FMT_M 0x03
#define CSD_3_TMP_WP_S 12 // [12:12]
#define CSD_3_TMP_WP_M 0x01
#define CSD_3_PERM_WP_S 13 // [13:13]
#define CSD_3_PERM_WP_M 0x01
#define CSD_3_COPY_S 14 // [14:14]
#define CSD_3_COPY_M 0x01
#define CSD_3_FILE_FMT_GRP_S 15 // [15:15]
#define CSD_3_FILE_FMT_GRP_M 0x01
// reserved 16 // [20:16]
// reserved 0x1F
#define CSD_3_WBLOCK_P_S 21 // [21:21]
#define CSD_3_WBLOCK_P_M 0x01
#define CSD_3_WBLEN_S 22 // [25:22]
#define CSD_3_WBLEN_M 0x0F
#define CSD_3_R2W_F_S 26 // [28:26]
#define CSD_3_R2W_F_M 0x07
#define CSD_3_MMC_DEF_ECC_S 29 // [30:29] reserved for MMC compatibility
#define CSD_3_MMC_DEF_ECC_M 0x03
#define CSD_3_WP_GRP_EN_S 31 // [31:31]
#define CSD_3_WP_GRP_EN_M 0x01
// Seconde Response INT <=> CSD[2] : bits 32 to 63
#define CSD_2_v21_WP_GRP_SIZE_S 0 // [38:32]
#define CSD_2_v21_WP_GRP_SIZE_M 0x7F
#define CSD_2_v21_SECT_SIZE_S 7 // [45:39]
#define CSD_2_v21_SECT_SIZE_M 0x7F
#define CSD_2_v21_ER_BLEN_EN_S 14 // [46:46]
#define CSD_2_v21_ER_BLEN_EN_M 0x01
#define CSD_2_v22_WP_GRP_SIZE_S 0 // [36:32]
#define CSD_2_v22_WP_GRP_SIZE_M 0x1F
#define CSD_2_v22_ER_GRP_SIZE_S 5 // [41:37]
#define CSD_2_v22_ER_GRP_SIZE_M 0x1F
#define CSD_2_v22_SECT_SIZE_S 10 // [46:42]
#define CSD_2_v22_SECT_SIZE_M 0x1F
#define CSD_2_C_SIZE_M_S 15 // [49:47]
#define CSD_2_C_SIZE_M_M 0x07
#define CSD_2_VDD_WMAX_S 18 // [52:50]
#define CSD_2_VDD_WMAX_M 0x07
#define CSD_2_VDD_WMIN_S 21 // [55:53]
#define CSD_2_VDD_WMIN_M 0x07
#define CSD_2_RCUR_MAX_S 24 // [58:56]
#define CSD_2_RCUR_MAX_M 0x07
#define CSD_2_RCUR_MIN_S 27 // [61:59]
#define CSD_2_RCUR_MIN_M 0x07
#define CSD_2_CSIZE_L_S 30 // [63:62] <=> 2 LSB of CSIZE
#define CSD_2_CSIZE_L_M 0x03
// Third Response INT <=> CSD[1] : bits 64 to 95
#define CSD_1_CSIZE_H_S 0 // [73:64] <=> 10 MSB of CSIZE
#define CSD_1_CSIZE_H_M 0x03FF
// reserved 10 // [75:74]
// reserved 0x03
#define CSD_1_DSR_I_S 12 // [76:76]
#define CSD_1_DSR_I_M 0x01
#define CSD_1_RD_B_MIS_S 13 // [77:77]
#define CSD_1_RD_B_MIS_M 0x01
#define CSD_1_WR_B_MIS_S 14 // [78:78]
#define CSD_1_WR_B_MIS_M 0x01
#define CSD_1_RD_B_PAR_S 15 // [79:79]
#define CSD_1_RD_B_PAR_M 0x01
#define CSD_1_RD_B_LEN_S 16 // [83:80]
#define CSD_1_RD_B_LEN_M 0x0F
#define CSD_1_CCC_S 20 // [95:84]
#define CSD_1_CCC_M 0x0FFF
// Fourth Response INT <=> CSD[0] : bits 96 to 127
#define CSD_0_TRANS_SPEED_S 0 // [103:96]
#define CSD_0_TRANS_SPEED_M 0xFF
#define CSD_0_NSAC_S 8 // [111:104]
#define CSD_0_NSAC_M 0xFF
#define CSD_0_TAAC_S 16 // [119:112]
#define CSD_0_TAAC_M 0xFF
// reserved 24 // [121:120]
// reserved 0x03
#define CSD_0_MMC_SPEC_VERS_S 26 // [125:122] reserved for MMC compatibility
#define CSD_0_MMC_SPEC_VERS_M 0x0F
#define CSD_0_STRUCT_S 30 // [127:126]
#define CSD_0_STRUCT_M 0x03
///////////////////////////////////////////////////////////////////////////////
#endif