Current Path : /sys/contrib/dev/acpica/compiler/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/contrib/dev/acpica/compiler/aslerror.c |
/****************************************************************************** * * Module Name: aslerror - Error handling and statistics * *****************************************************************************/ /* * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #define ASL_EXCEPTIONS #include <contrib/dev/acpica/compiler/aslcompiler.h> #define _COMPONENT ACPI_COMPILER ACPI_MODULE_NAME ("aslerror") /* Local prototypes */ static void AeAddToErrorLog ( ASL_ERROR_MSG *Enode); void AeClearErrorLog ( void) { ASL_ERROR_MSG *Enode = Gbl_ErrorLog; ASL_ERROR_MSG *Next; /* Walk the error node list */ while (Enode) { Next = Enode->Next; ACPI_FREE (Enode); Enode = Next; } Gbl_ErrorLog = NULL; } /******************************************************************************* * * FUNCTION: AeAddToErrorLog * * PARAMETERS: Enode - An error node to add to the log * * RETURN: None * * DESCRIPTION: Add a new error node to the error log. The error log is * ordered by the "logical" line number (cumulative line number * including all include files.) * ******************************************************************************/ static void AeAddToErrorLog ( ASL_ERROR_MSG *Enode) { ASL_ERROR_MSG *Next; ASL_ERROR_MSG *Prev; /* If Gbl_ErrorLog is null, this is the first error node */ if (!Gbl_ErrorLog) { Gbl_ErrorLog = Enode; return; } /* * Walk error list until we find a line number greater than ours. * List is sorted according to line number. */ Prev = NULL; Next = Gbl_ErrorLog; while ((Next) && (Next->LogicalLineNumber <= Enode->LogicalLineNumber)) { Prev = Next; Next = Next->Next; } /* Found our place in the list */ Enode->Next = Next; if (Prev) { Prev->Next = Enode; } else { Gbl_ErrorLog = Enode; } } /******************************************************************************* * * FUNCTION: AePrintException * * PARAMETERS: FileId - ID of output file * Enode - Error node to print * Header - Additional text before each message * * RETURN: None * * DESCRIPTION: Print the contents of an error node. * * NOTE: We don't use the FlxxxFile I/O functions here because on error * they abort the compiler and call this function! Since we * are reporting errors here, we ignore most output errors and * just try to get out as much as we can. * ******************************************************************************/ void AePrintException ( UINT32 FileId, ASL_ERROR_MSG *Enode, char *Header) { UINT8 SourceByte; int Actual; size_t RActual; UINT32 MsgLength; char *MainMessage; char *ExtraMessage; UINT32 SourceColumn; UINT32 ErrorColumn; FILE *OutputFile; FILE *SourceFile; long FileSize; BOOLEAN PrematureEOF = FALSE; if (Gbl_NoErrors) { return; } /* * Only listing files have a header, and remarks/optimizations * are always output */ if (!Header) { /* Ignore remarks if requested */ switch (Enode->Level) { case ASL_REMARK: if (!Gbl_DisplayRemarks) { return; } break; case ASL_OPTIMIZATION: if (!Gbl_DisplayOptimizations) { return; } break; default: break; } } /* Get the file handles */ OutputFile = Gbl_Files[FileId].Handle; /* Use the merged header/source file if present, otherwise use input file */ SourceFile = Gbl_Files[ASL_FILE_SOURCE_OUTPUT].Handle; if (!SourceFile) { SourceFile = Gbl_Files[ASL_FILE_INPUT].Handle; } if (SourceFile) { /* Determine if the error occurred at source file EOF */ fseek (SourceFile, 0, SEEK_END); FileSize = ftell (SourceFile); if ((long) Enode->LogicalByteOffset >= FileSize) { PrematureEOF = TRUE; } } if (Header) { fprintf (OutputFile, "%s", Header); } /* Print filename and line number if present and valid */ if (Enode->Filename) { if (Gbl_VerboseErrors) { fprintf (OutputFile, "%6s", Enode->Filename); if (Enode->LineNumber) { fprintf (OutputFile, " %6u: ", Enode->LineNumber); /* * If not at EOF, get the corresponding source code line and * display it. Don't attempt this if we have a premature EOF * condition. */ if (!PrematureEOF) { /* * Seek to the offset in the combined source file, read * the source line, and write it to the output. */ Actual = fseek (SourceFile, (long) Enode->LogicalByteOffset, (int) SEEK_SET); if (Actual) { fprintf (OutputFile, "[*** iASL: Seek error on source code temp file %s ***]", Gbl_Files[ASL_FILE_SOURCE_OUTPUT].Filename); } else { RActual = fread (&SourceByte, 1, 1, SourceFile); if (!RActual) { fprintf (OutputFile, "[*** iASL: Read error on source code temp file %s ***]", Gbl_Files[ASL_FILE_SOURCE_OUTPUT].Filename); } else while (RActual && SourceByte && (SourceByte != '\n')) { fwrite (&SourceByte, 1, 1, OutputFile); RActual = fread (&SourceByte, 1, 1, SourceFile); } } } fprintf (OutputFile, "\n"); } } else { fprintf (OutputFile, "%s", Enode->Filename); if (Enode->LineNumber) { fprintf (OutputFile, "(%u) : ", Enode->LineNumber); } } } /* NULL message ID, just print the raw message */ if (Enode->MessageId == 0) { fprintf (OutputFile, "%s\n", Enode->Message); } else { /* Decode the message ID */ fprintf (OutputFile, "%s %4.4d - ", AslErrorLevel[Enode->Level], Enode->MessageId + ((Enode->Level+1) * 1000)); MainMessage = AslMessages[Enode->MessageId]; ExtraMessage = Enode->Message; if (Enode->LineNumber) { MsgLength = strlen (MainMessage); if (MsgLength == 0) { MainMessage = Enode->Message; MsgLength = strlen (MainMessage); ExtraMessage = NULL; } if (Gbl_VerboseErrors && !PrematureEOF) { SourceColumn = Enode->Column + Enode->FilenameLength + 6 + 2; ErrorColumn = ASL_ERROR_LEVEL_LENGTH + 5 + 2 + 1; if ((MsgLength + ErrorColumn) < (SourceColumn - 1)) { fprintf (OutputFile, "%*s%s", (int) ((SourceColumn - 1) - ErrorColumn), MainMessage, " ^ "); } else { fprintf (OutputFile, "%*s %s", (int) ((SourceColumn - ErrorColumn) + 1), "^", MainMessage); } } else { fprintf (OutputFile, " %s", MainMessage); } /* Print the extra info message if present */ if (ExtraMessage) { fprintf (OutputFile, " (%s)", ExtraMessage); } if (PrematureEOF) { fprintf (OutputFile, " and premature End-Of-File"); } fprintf (OutputFile, "\n"); if (Gbl_VerboseErrors) { fprintf (OutputFile, "\n"); } } else { fprintf (OutputFile, " %s %s\n\n", MainMessage, ExtraMessage); } } } /******************************************************************************* * * FUNCTION: AePrintErrorLog * * PARAMETERS: FileId - Where to output the error log * * RETURN: None * * DESCRIPTION: Print the entire contents of the error log * ******************************************************************************/ void AePrintErrorLog ( UINT32 FileId) { ASL_ERROR_MSG *Enode = Gbl_ErrorLog; /* Walk the error node list */ while (Enode) { AePrintException (FileId, Enode, NULL); Enode = Enode->Next; } } /******************************************************************************* * * FUNCTION: AslCommonError * * PARAMETERS: Level - Seriousness (Warning/error, etc.) * MessageId - Index into global message buffer * CurrentLineNumber - Actual file line number * LogicalLineNumber - Cumulative line number * LogicalByteOffset - Byte offset in source file * Column - Column in current line * Filename - source filename * ExtraMessage - additional error message * * RETURN: None * * DESCRIPTION: Create a new error node and add it to the error log * ******************************************************************************/ void AslCommonError ( UINT8 Level, UINT8 MessageId, UINT32 CurrentLineNumber, UINT32 LogicalLineNumber, UINT32 LogicalByteOffset, UINT32 Column, char *Filename, char *ExtraMessage) { UINT32 MessageSize; char *MessageBuffer = NULL; ASL_ERROR_MSG *Enode; Enode = UtLocalCalloc (sizeof (ASL_ERROR_MSG)); if (ExtraMessage) { /* Allocate a buffer for the message and a new error node */ MessageSize = strlen (ExtraMessage) + 1; MessageBuffer = UtLocalCalloc (MessageSize); /* Keep a copy of the extra message */ ACPI_STRCPY (MessageBuffer, ExtraMessage); } /* Initialize the error node */ if (Filename) { Enode->Filename = Filename; Enode->FilenameLength = strlen (Filename); if (Enode->FilenameLength < 6) { Enode->FilenameLength = 6; } } Enode->MessageId = MessageId; Enode->Level = Level; Enode->LineNumber = CurrentLineNumber; Enode->LogicalLineNumber = LogicalLineNumber; Enode->LogicalByteOffset = LogicalByteOffset; Enode->Column = Column; Enode->Message = MessageBuffer; /* Add the new node to the error node list */ AeAddToErrorLog (Enode); if (Gbl_DebugFlag) { /* stderr is a file, send error to it immediately */ AePrintException (ASL_FILE_STDERR, Enode, NULL); } Gbl_ExceptionCount[Level]++; if (Gbl_ExceptionCount[ASL_ERROR] > ASL_MAX_ERROR_COUNT) { printf ("\nMaximum error count (%u) exceeded\n", ASL_MAX_ERROR_COUNT); Gbl_SourceLine = 0; Gbl_NextError = Gbl_ErrorLog; CmDoOutputFiles (); CmCleanupAndExit (); exit(1); } return; } /******************************************************************************* * * FUNCTION: AslError * * PARAMETERS: Level - Seriousness (Warning/error, etc.) * MessageId - Index into global message buffer * Op - Parse node where error happened * ExtraMessage - additional error message * * RETURN: None * * DESCRIPTION: Main error reporting routine for the ASL compiler (all code * except the parser.) * ******************************************************************************/ void AslError ( UINT8 Level, UINT8 MessageId, ACPI_PARSE_OBJECT *Op, char *ExtraMessage) { switch (Level) { case ASL_WARNING2: case ASL_WARNING3: if (Gbl_WarningLevel < Level) { return; } break; default: break; } if (Op) { AslCommonError (Level, MessageId, Op->Asl.LineNumber, Op->Asl.LogicalLineNumber, Op->Asl.LogicalByteOffset, Op->Asl.Column, Op->Asl.Filename, ExtraMessage); } else { AslCommonError (Level, MessageId, 0, 0, 0, 0, NULL, ExtraMessage); } } /******************************************************************************* * * FUNCTION: AslCoreSubsystemError * * PARAMETERS: Op - Parse node where error happened * Status - The ACPI CA Exception * ExtraMessage - additional error message * Abort - TRUE -> Abort compilation * * RETURN: None * * DESCRIPTION: Error reporting routine for exceptions returned by the ACPI * CA core subsystem. * ******************************************************************************/ void AslCoreSubsystemError ( ACPI_PARSE_OBJECT *Op, ACPI_STATUS Status, char *ExtraMessage, BOOLEAN Abort) { sprintf (MsgBuffer, "%s %s", AcpiFormatException (Status), ExtraMessage); if (Op) { AslCommonError (ASL_ERROR, ASL_MSG_CORE_EXCEPTION, Op->Asl.LineNumber, Op->Asl.LogicalLineNumber, Op->Asl.LogicalByteOffset, Op->Asl.Column, Op->Asl.Filename, MsgBuffer); } else { AslCommonError (ASL_ERROR, ASL_MSG_CORE_EXCEPTION, 0, 0, 0, 0, NULL, MsgBuffer); } if (Abort) { AslAbort (); } } /******************************************************************************* * * FUNCTION: AslCompilererror * * PARAMETERS: CompilerMessage - Error message from the parser * * RETURN: Status (0 for now) * * DESCRIPTION: Report an error situation discovered in a production * NOTE: don't change the name of this function, it is called * from the auto-generated parser. * ******************************************************************************/ int AslCompilererror ( char *CompilerMessage) { AslCommonError (ASL_ERROR, ASL_MSG_SYNTAX, Gbl_CurrentLineNumber, Gbl_LogicalLineNumber, Gbl_CurrentLineOffset, Gbl_CurrentColumn, Gbl_Files[ASL_FILE_INPUT].Filename, CompilerMessage); return 0; }