| Current Path : /sys/contrib/dev/acpica/namespace/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/contrib/dev/acpica/namespace/nsaccess.c |
/*******************************************************************************
*
* Module Name: nsaccess - Top-level functions for accessing ACPI namespace
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define __NSACCESS_C__
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/amlcode.h>
#include <contrib/dev/acpica/include/acnamesp.h>
#include <contrib/dev/acpica/include/acdispat.h>
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME ("nsaccess")
/*******************************************************************************
*
* FUNCTION: AcpiNsRootInitialize
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Allocate and initialize the default root named objects
*
* MUTEX: Locks namespace for entire execution
*
******************************************************************************/
ACPI_STATUS
AcpiNsRootInitialize (
void)
{
ACPI_STATUS Status;
const ACPI_PREDEFINED_NAMES *InitVal = NULL;
ACPI_NAMESPACE_NODE *NewNode;
ACPI_OPERAND_OBJECT *ObjDesc;
ACPI_STRING Val = NULL;
ACPI_FUNCTION_TRACE (NsRootInitialize);
Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/*
* The global root ptr is initially NULL, so a non-NULL value indicates
* that AcpiNsRootInitialize() has already been called; just return.
*/
if (AcpiGbl_RootNode)
{
Status = AE_OK;
goto UnlockAndExit;
}
/*
* Tell the rest of the subsystem that the root is initialized
* (This is OK because the namespace is locked)
*/
AcpiGbl_RootNode = &AcpiGbl_RootNodeStruct;
/* Enter the pre-defined names in the name table */
ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
"Entering predefined entries into namespace\n"));
for (InitVal = AcpiGbl_PreDefinedNames; InitVal->Name; InitVal++)
{
/* _OSI is optional for now, will be permanent later */
if (!ACPI_STRCMP (InitVal->Name, "_OSI") && !AcpiGbl_CreateOsiMethod)
{
continue;
}
Status = AcpiNsLookup (NULL, InitVal->Name, InitVal->Type,
ACPI_IMODE_LOAD_PASS2, ACPI_NS_NO_UPSEARCH,
NULL, &NewNode);
if (ACPI_FAILURE (Status) || (!NewNode)) /* Must be on same line for code converter */
{
ACPI_EXCEPTION ((AE_INFO, Status,
"Could not create predefined name %s",
InitVal->Name));
}
/*
* Name entered successfully. If entry in PreDefinedNames[] specifies
* an initial value, create the initial value.
*/
if (InitVal->Val)
{
Status = AcpiOsPredefinedOverride (InitVal, &Val);
if (ACPI_FAILURE (Status))
{
ACPI_ERROR ((AE_INFO,
"Could not override predefined %s",
InitVal->Name));
}
if (!Val)
{
Val = InitVal->Val;
}
/*
* Entry requests an initial value, allocate a
* descriptor for it.
*/
ObjDesc = AcpiUtCreateInternalObject (InitVal->Type);
if (!ObjDesc)
{
Status = AE_NO_MEMORY;
goto UnlockAndExit;
}
/*
* Convert value string from table entry to
* internal representation. Only types actually
* used for initial values are implemented here.
*/
switch (InitVal->Type)
{
case ACPI_TYPE_METHOD:
ObjDesc->Method.ParamCount = (UINT8) ACPI_TO_INTEGER (Val);
ObjDesc->Common.Flags |= AOPOBJ_DATA_VALID;
#if defined (ACPI_ASL_COMPILER)
/* Save the parameter count for the iASL compiler */
NewNode->Value = ObjDesc->Method.ParamCount;
#else
/* Mark this as a very SPECIAL method */
ObjDesc->Method.InfoFlags = ACPI_METHOD_INTERNAL_ONLY;
ObjDesc->Method.Dispatch.Implementation = AcpiUtOsiImplementation;
#endif
break;
case ACPI_TYPE_INTEGER:
ObjDesc->Integer.Value = ACPI_TO_INTEGER (Val);
break;
case ACPI_TYPE_STRING:
/* Build an object around the static string */
ObjDesc->String.Length = (UINT32) ACPI_STRLEN (Val);
ObjDesc->String.Pointer = Val;
ObjDesc->Common.Flags |= AOPOBJ_STATIC_POINTER;
break;
case ACPI_TYPE_MUTEX:
ObjDesc->Mutex.Node = NewNode;
ObjDesc->Mutex.SyncLevel = (UINT8) (ACPI_TO_INTEGER (Val) - 1);
/* Create a mutex */
Status = AcpiOsCreateMutex (&ObjDesc->Mutex.OsMutex);
if (ACPI_FAILURE (Status))
{
AcpiUtRemoveReference (ObjDesc);
goto UnlockAndExit;
}
/* Special case for ACPI Global Lock */
if (ACPI_STRCMP (InitVal->Name, "_GL_") == 0)
{
AcpiGbl_GlobalLockMutex = ObjDesc;
/* Create additional counting semaphore for global lock */
Status = AcpiOsCreateSemaphore (
1, 0, &AcpiGbl_GlobalLockSemaphore);
if (ACPI_FAILURE (Status))
{
AcpiUtRemoveReference (ObjDesc);
goto UnlockAndExit;
}
}
break;
default:
ACPI_ERROR ((AE_INFO, "Unsupported initial type value 0x%X",
InitVal->Type));
AcpiUtRemoveReference (ObjDesc);
ObjDesc = NULL;
continue;
}
/* Store pointer to value descriptor in the Node */
Status = AcpiNsAttachObject (NewNode, ObjDesc,
ObjDesc->Common.Type);
/* Remove local reference to the object */
AcpiUtRemoveReference (ObjDesc);
}
}
UnlockAndExit:
(void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
/* Save a handle to "_GPE", it is always present */
if (ACPI_SUCCESS (Status))
{
Status = AcpiNsGetNode (NULL, "\\_GPE", ACPI_NS_NO_UPSEARCH,
&AcpiGbl_FadtGpeDevice);
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiNsLookup
*
* PARAMETERS: ScopeInfo - Current scope info block
* Pathname - Search pathname, in internal format
* (as represented in the AML stream)
* Type - Type associated with name
* InterpreterMode - IMODE_LOAD_PASS2 => add name if not found
* Flags - Flags describing the search restrictions
* WalkState - Current state of the walk
* ReturnNode - Where the Node is placed (if found
* or created successfully)
*
* RETURN: Status
*
* DESCRIPTION: Find or enter the passed name in the name space.
* Log an error if name not found in Exec mode.
*
* MUTEX: Assumes namespace is locked.
*
******************************************************************************/
ACPI_STATUS
AcpiNsLookup (
ACPI_GENERIC_STATE *ScopeInfo,
char *Pathname,
ACPI_OBJECT_TYPE Type,
ACPI_INTERPRETER_MODE InterpreterMode,
UINT32 Flags,
ACPI_WALK_STATE *WalkState,
ACPI_NAMESPACE_NODE **ReturnNode)
{
ACPI_STATUS Status;
char *Path = Pathname;
ACPI_NAMESPACE_NODE *PrefixNode;
ACPI_NAMESPACE_NODE *CurrentNode = NULL;
ACPI_NAMESPACE_NODE *ThisNode = NULL;
UINT32 NumSegments;
UINT32 NumCarats;
ACPI_NAME SimpleName;
ACPI_OBJECT_TYPE TypeToCheckFor;
ACPI_OBJECT_TYPE ThisSearchType;
UINT32 SearchParentFlag = ACPI_NS_SEARCH_PARENT;
UINT32 LocalFlags;
ACPI_FUNCTION_TRACE (NsLookup);
if (!ReturnNode)
{
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
LocalFlags = Flags & ~(ACPI_NS_ERROR_IF_FOUND | ACPI_NS_SEARCH_PARENT);
*ReturnNode = ACPI_ENTRY_NOT_FOUND;
AcpiGbl_NsLookupCount++;
if (!AcpiGbl_RootNode)
{
return_ACPI_STATUS (AE_NO_NAMESPACE);
}
/* Get the prefix scope. A null scope means use the root scope */
if ((!ScopeInfo) ||
(!ScopeInfo->Scope.Node))
{
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Null scope prefix, using root node (%p)\n",
AcpiGbl_RootNode));
PrefixNode = AcpiGbl_RootNode;
}
else
{
PrefixNode = ScopeInfo->Scope.Node;
if (ACPI_GET_DESCRIPTOR_TYPE (PrefixNode) != ACPI_DESC_TYPE_NAMED)
{
ACPI_ERROR ((AE_INFO, "%p is not a namespace node [%s]",
PrefixNode, AcpiUtGetDescriptorName (PrefixNode)));
return_ACPI_STATUS (AE_AML_INTERNAL);
}
if (!(Flags & ACPI_NS_PREFIX_IS_SCOPE))
{
/*
* This node might not be a actual "scope" node (such as a
* Device/Method, etc.) It could be a Package or other object
* node. Backup up the tree to find the containing scope node.
*/
while (!AcpiNsOpensScope (PrefixNode->Type) &&
PrefixNode->Type != ACPI_TYPE_ANY)
{
PrefixNode = PrefixNode->Parent;
}
}
}
/* Save type. TBD: may be no longer necessary */
TypeToCheckFor = Type;
/*
* Begin examination of the actual pathname
*/
if (!Pathname)
{
/* A Null NamePath is allowed and refers to the root */
NumSegments = 0;
ThisNode = AcpiGbl_RootNode;
Path = "";
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Null Pathname (Zero segments), Flags=%X\n", Flags));
}
else
{
/*
* Name pointer is valid (and must be in internal name format)
*
* Check for scope prefixes:
*
* As represented in the AML stream, a namepath consists of an
* optional scope prefix followed by a name segment part.
*
* If present, the scope prefix is either a Root Prefix (in
* which case the name is fully qualified), or one or more
* Parent Prefixes (in which case the name's scope is relative
* to the current scope).
*/
if (*Path == (UINT8) AML_ROOT_PREFIX)
{
/* Pathname is fully qualified, start from the root */
ThisNode = AcpiGbl_RootNode;
SearchParentFlag = ACPI_NS_NO_UPSEARCH;
/* Point to name segment part */
Path++;
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Path is absolute from root [%p]\n", ThisNode));
}
else
{
/* Pathname is relative to current scope, start there */
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Searching relative to prefix scope [%4.4s] (%p)\n",
AcpiUtGetNodeName (PrefixNode), PrefixNode));
/*
* Handle multiple Parent Prefixes (carat) by just getting
* the parent node for each prefix instance.
*/
ThisNode = PrefixNode;
NumCarats = 0;
while (*Path == (UINT8) AML_PARENT_PREFIX)
{
/* Name is fully qualified, no search rules apply */
SearchParentFlag = ACPI_NS_NO_UPSEARCH;
/*
* Point past this prefix to the name segment
* part or the next Parent Prefix
*/
Path++;
/* Backup to the parent node */
NumCarats++;
ThisNode = ThisNode->Parent;
if (!ThisNode)
{
/* Current scope has no parent scope */
ACPI_ERROR ((AE_INFO,
"ACPI path has too many parent prefixes (^) "
"- reached beyond root node"));
return_ACPI_STATUS (AE_NOT_FOUND);
}
}
if (SearchParentFlag == ACPI_NS_NO_UPSEARCH)
{
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Search scope is [%4.4s], path has %u carat(s)\n",
AcpiUtGetNodeName (ThisNode), NumCarats));
}
}
/*
* Determine the number of ACPI name segments in this pathname.
*
* The segment part consists of either:
* - A Null name segment (0)
* - A DualNamePrefix followed by two 4-byte name segments
* - A MultiNamePrefix followed by a byte indicating the
* number of segments and the segments themselves.
* - A single 4-byte name segment
*
* Examine the name prefix opcode, if any, to determine the number of
* segments.
*/
switch (*Path)
{
case 0:
/*
* Null name after a root or parent prefixes. We already
* have the correct target node and there are no name segments.
*/
NumSegments = 0;
Type = ThisNode->Type;
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Prefix-only Pathname (Zero name segments), Flags=%X\n",
Flags));
break;
case AML_DUAL_NAME_PREFIX:
/* More than one NameSeg, search rules do not apply */
SearchParentFlag = ACPI_NS_NO_UPSEARCH;
/* Two segments, point to first name segment */
NumSegments = 2;
Path++;
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Dual Pathname (2 segments, Flags=%X)\n", Flags));
break;
case AML_MULTI_NAME_PREFIX_OP:
/* More than one NameSeg, search rules do not apply */
SearchParentFlag = ACPI_NS_NO_UPSEARCH;
/* Extract segment count, point to first name segment */
Path++;
NumSegments = (UINT32) (UINT8) *Path;
Path++;
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Multi Pathname (%u Segments, Flags=%X)\n",
NumSegments, Flags));
break;
default:
/*
* Not a Null name, no Dual or Multi prefix, hence there is
* only one name segment and Pathname is already pointing to it.
*/
NumSegments = 1;
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Simple Pathname (1 segment, Flags=%X)\n", Flags));
break;
}
ACPI_DEBUG_EXEC (AcpiNsPrintPathname (NumSegments, Path));
}
/*
* Search namespace for each segment of the name. Loop through and
* verify (or add to the namespace) each name segment.
*
* The object type is significant only at the last name
* segment. (We don't care about the types along the path, only
* the type of the final target object.)
*/
ThisSearchType = ACPI_TYPE_ANY;
CurrentNode = ThisNode;
while (NumSegments && CurrentNode)
{
NumSegments--;
if (!NumSegments)
{
/* This is the last segment, enable typechecking */
ThisSearchType = Type;
/*
* Only allow automatic parent search (search rules) if the caller
* requested it AND we have a single, non-fully-qualified NameSeg
*/
if ((SearchParentFlag != ACPI_NS_NO_UPSEARCH) &&
(Flags & ACPI_NS_SEARCH_PARENT))
{
LocalFlags |= ACPI_NS_SEARCH_PARENT;
}
/* Set error flag according to caller */
if (Flags & ACPI_NS_ERROR_IF_FOUND)
{
LocalFlags |= ACPI_NS_ERROR_IF_FOUND;
}
}
/* Extract one ACPI name from the front of the pathname */
ACPI_MOVE_32_TO_32 (&SimpleName, Path);
/* Try to find the single (4 character) ACPI name */
Status = AcpiNsSearchAndEnter (SimpleName, WalkState, CurrentNode,
InterpreterMode, ThisSearchType, LocalFlags, &ThisNode);
if (ACPI_FAILURE (Status))
{
if (Status == AE_NOT_FOUND)
{
/* Name not found in ACPI namespace */
ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
"Name [%4.4s] not found in scope [%4.4s] %p\n",
(char *) &SimpleName, (char *) &CurrentNode->Name,
CurrentNode));
}
*ReturnNode = ThisNode;
return_ACPI_STATUS (Status);
}
/* More segments to follow? */
if (NumSegments > 0)
{
/*
* If we have an alias to an object that opens a scope (such as a
* device or processor), we need to dereference the alias here so
* that we can access any children of the original node (via the
* remaining segments).
*/
if (ThisNode->Type == ACPI_TYPE_LOCAL_ALIAS)
{
if (!ThisNode->Object)
{
return_ACPI_STATUS (AE_NOT_EXIST);
}
if (AcpiNsOpensScope (((ACPI_NAMESPACE_NODE *)
ThisNode->Object)->Type))
{
ThisNode = (ACPI_NAMESPACE_NODE *) ThisNode->Object;
}
}
}
/* Special handling for the last segment (NumSegments == 0) */
else
{
/*
* Sanity typecheck of the target object:
*
* If 1) This is the last segment (NumSegments == 0)
* 2) And we are looking for a specific type
* (Not checking for TYPE_ANY)
* 3) Which is not an alias
* 4) Which is not a local type (TYPE_SCOPE)
* 5) And the type of target object is known (not TYPE_ANY)
* 6) And target object does not match what we are looking for
*
* Then we have a type mismatch. Just warn and ignore it.
*/
if ((TypeToCheckFor != ACPI_TYPE_ANY) &&
(TypeToCheckFor != ACPI_TYPE_LOCAL_ALIAS) &&
(TypeToCheckFor != ACPI_TYPE_LOCAL_METHOD_ALIAS) &&
(TypeToCheckFor != ACPI_TYPE_LOCAL_SCOPE) &&
(ThisNode->Type != ACPI_TYPE_ANY) &&
(ThisNode->Type != TypeToCheckFor))
{
/* Complain about a type mismatch */
ACPI_WARNING ((AE_INFO,
"NsLookup: Type mismatch on %4.4s (%s), searching for (%s)",
ACPI_CAST_PTR (char, &SimpleName),
AcpiUtGetTypeName (ThisNode->Type),
AcpiUtGetTypeName (TypeToCheckFor)));
}
/*
* If this is the last name segment and we are not looking for a
* specific type, but the type of found object is known, use that
* type to (later) see if it opens a scope.
*/
if (Type == ACPI_TYPE_ANY)
{
Type = ThisNode->Type;
}
}
/* Point to next name segment and make this node current */
Path += ACPI_NAME_SIZE;
CurrentNode = ThisNode;
}
/* Always check if we need to open a new scope */
if (!(Flags & ACPI_NS_DONT_OPEN_SCOPE) && (WalkState))
{
/*
* If entry is a type which opens a scope, push the new scope on the
* scope stack.
*/
if (AcpiNsOpensScope (Type))
{
Status = AcpiDsScopeStackPush (ThisNode, Type, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
}
}
*ReturnNode = ThisNode;
return_ACPI_STATUS (AE_OK);
}