| Current Path : /sys/dev/ata/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/dev/ata/ata-all.h |
/*-
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/ata/ata-all.h 233717 2012-03-30 23:56:16Z marius $
*/
#include "opt_ata.h"
#if 0
#define ATA_LEGACY_SUPPORT /* Enable obsolete features that break
* some modern devices */
#endif
/* ATA register defines */
#define ATA_DATA 0 /* (RW) data */
#define ATA_FEATURE 1 /* (W) feature */
#define ATA_F_DMA 0x01 /* enable DMA */
#define ATA_F_OVL 0x02 /* enable overlap */
#define ATA_COUNT 2 /* (W) sector count */
#define ATA_SECTOR 3 /* (RW) sector # */
#define ATA_CYL_LSB 4 /* (RW) cylinder# LSB */
#define ATA_CYL_MSB 5 /* (RW) cylinder# MSB */
#define ATA_DRIVE 6 /* (W) Sector/Drive/Head */
#define ATA_D_LBA 0x40 /* use LBA addressing */
#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */
#define ATA_COMMAND 7 /* (W) command */
#define ATA_ERROR 8 /* (R) error */
#define ATA_E_ILI 0x01 /* illegal length */
#define ATA_E_NM 0x02 /* no media */
#define ATA_E_ABORT 0x04 /* command aborted */
#define ATA_E_MCR 0x08 /* media change request */
#define ATA_E_IDNF 0x10 /* ID not found */
#define ATA_E_MC 0x20 /* media changed */
#define ATA_E_UNC 0x40 /* uncorrectable data */
#define ATA_E_ICRC 0x80 /* UDMA crc error */
#define ATA_E_ATAPI_SENSE_MASK 0xf0 /* ATAPI sense key mask */
#define ATA_IREASON 9 /* (R) interrupt reason */
#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */
#define ATA_I_IN 0x02 /* read (1) | write (0) */
#define ATA_I_RELEASE 0x04 /* released bus (1) */
#define ATA_I_TAGMASK 0xf8 /* tag mask */
#define ATA_STATUS 10 /* (R) status */
#define ATA_ALTSTAT 11 /* (R) alternate status */
#define ATA_S_ERROR 0x01 /* error */
#define ATA_S_INDEX 0x02 /* index */
#define ATA_S_CORR 0x04 /* data corrected */
#define ATA_S_DRQ 0x08 /* data request */
#define ATA_S_DSC 0x10 /* drive seek completed */
#define ATA_S_SERVICE 0x10 /* drive needs service */
#define ATA_S_DWF 0x20 /* drive write fault */
#define ATA_S_DMA 0x20 /* DMA ready */
#define ATA_S_READY 0x40 /* drive ready */
#define ATA_S_BUSY 0x80 /* busy */
#define ATA_CONTROL 12 /* (W) control */
#define ATA_CTLOFFSET 0x206 /* control register offset */
#define ATA_PCCARD_CTLOFFSET 0x0e /* do for PCCARD devices */
#define ATA_PC98_CTLOFFSET 0x10c /* do for PC98 devices */
#define ATA_A_IDS 0x02 /* disable interrupts */
#define ATA_A_RESET 0x04 /* RESET controller */
#ifdef ATA_LEGACY_SUPPORT
#define ATA_A_4BIT 0x08 /* 4 head bits: obsolete 1996 */
#else
#define ATA_A_4BIT 0x00
#endif
#define ATA_A_HOB 0x80 /* High Order Byte enable */
/* SATA register defines */
#define ATA_SSTATUS 13
#define ATA_SS_DET_MASK 0x0000000f
#define ATA_SS_DET_NO_DEVICE 0x00000000
#define ATA_SS_DET_DEV_PRESENT 0x00000001
#define ATA_SS_DET_PHY_ONLINE 0x00000003
#define ATA_SS_DET_PHY_OFFLINE 0x00000004
#define ATA_SS_SPD_MASK 0x000000f0
#define ATA_SS_SPD_NO_SPEED 0x00000000
#define ATA_SS_SPD_GEN1 0x00000010
#define ATA_SS_SPD_GEN2 0x00000020
#define ATA_SS_IPM_MASK 0x00000f00
#define ATA_SS_IPM_NO_DEVICE 0x00000000
#define ATA_SS_IPM_ACTIVE 0x00000100
#define ATA_SS_IPM_PARTIAL 0x00000200
#define ATA_SS_IPM_SLUMBER 0x00000600
#define ATA_SERROR 14
#define ATA_SE_DATA_CORRECTED 0x00000001
#define ATA_SE_COMM_CORRECTED 0x00000002
#define ATA_SE_DATA_ERR 0x00000100
#define ATA_SE_COMM_ERR 0x00000200
#define ATA_SE_PROT_ERR 0x00000400
#define ATA_SE_HOST_ERR 0x00000800
#define ATA_SE_PHY_CHANGED 0x00010000
#define ATA_SE_PHY_IERROR 0x00020000
#define ATA_SE_COMM_WAKE 0x00040000
#define ATA_SE_DECODE_ERR 0x00080000
#define ATA_SE_PARITY_ERR 0x00100000
#define ATA_SE_CRC_ERR 0x00200000
#define ATA_SE_HANDSHAKE_ERR 0x00400000
#define ATA_SE_LINKSEQ_ERR 0x00800000
#define ATA_SE_TRANSPORT_ERR 0x01000000
#define ATA_SE_UNKNOWN_FIS 0x02000000
#define ATA_SCONTROL 15
#define ATA_SC_DET_MASK 0x0000000f
#define ATA_SC_DET_IDLE 0x00000000
#define ATA_SC_DET_RESET 0x00000001
#define ATA_SC_DET_DISABLE 0x00000004
#define ATA_SC_SPD_MASK 0x000000f0
#define ATA_SC_SPD_NO_SPEED 0x00000000
#define ATA_SC_SPD_SPEED_GEN1 0x00000010
#define ATA_SC_SPD_SPEED_GEN2 0x00000020
#define ATA_SC_IPM_MASK 0x00000f00
#define ATA_SC_IPM_NONE 0x00000000
#define ATA_SC_IPM_DIS_PARTIAL 0x00000100
#define ATA_SC_IPM_DIS_SLUMBER 0x00000200
#define ATA_SACTIVE 16
/* SATA AHCI v1.0 register defines */
#define ATA_AHCI_CAP 0x00
#define ATA_AHCI_CAP_NPMASK 0x0000001f
#define ATA_AHCI_CAP_SXS 0x00000020
#define ATA_AHCI_CAP_EMS 0x00000040
#define ATA_AHCI_CAP_CCCS 0x00000080
#define ATA_AHCI_CAP_NCS 0x00001F00
#define ATA_AHCI_CAP_NCS_SHIFT 8
#define ATA_AHCI_CAP_PSC 0x00002000
#define ATA_AHCI_CAP_SSC 0x00004000
#define ATA_AHCI_CAP_PMD 0x00008000
#define ATA_AHCI_CAP_FBSS 0x00010000
#define ATA_AHCI_CAP_SPM 0x00020000
#define ATA_AHCI_CAP_SAM 0x00080000
#define ATA_AHCI_CAP_ISS 0x00F00000
#define ATA_AHCI_CAP_ISS_SHIFT 20
#define ATA_AHCI_CAP_SCLO 0x01000000
#define ATA_AHCI_CAP_SAL 0x02000000
#define ATA_AHCI_CAP_SALP 0x04000000
#define ATA_AHCI_CAP_SSS 0x08000000
#define ATA_AHCI_CAP_SMPS 0x10000000
#define ATA_AHCI_CAP_SSNTF 0x20000000
#define ATA_AHCI_CAP_SNCQ 0x40000000
#define ATA_AHCI_CAP_64BIT 0x80000000
#define ATA_AHCI_GHC 0x04
#define ATA_AHCI_GHC_AE 0x80000000
#define ATA_AHCI_GHC_IE 0x00000002
#define ATA_AHCI_GHC_HR 0x00000001
#define ATA_AHCI_IS 0x08
#define ATA_AHCI_PI 0x0c
#define ATA_AHCI_VS 0x10
#define ATA_AHCI_OFFSET 0x80
#define ATA_AHCI_P_CLB 0x100
#define ATA_AHCI_P_CLBU 0x104
#define ATA_AHCI_P_FB 0x108
#define ATA_AHCI_P_FBU 0x10c
#define ATA_AHCI_P_IS 0x110
#define ATA_AHCI_P_IE 0x114
#define ATA_AHCI_P_IX_DHR 0x00000001
#define ATA_AHCI_P_IX_PS 0x00000002
#define ATA_AHCI_P_IX_DS 0x00000004
#define ATA_AHCI_P_IX_SDB 0x00000008
#define ATA_AHCI_P_IX_UF 0x00000010
#define ATA_AHCI_P_IX_DP 0x00000020
#define ATA_AHCI_P_IX_PC 0x00000040
#define ATA_AHCI_P_IX_DI 0x00000080
#define ATA_AHCI_P_IX_PRC 0x00400000
#define ATA_AHCI_P_IX_IPM 0x00800000
#define ATA_AHCI_P_IX_OF 0x01000000
#define ATA_AHCI_P_IX_INF 0x04000000
#define ATA_AHCI_P_IX_IF 0x08000000
#define ATA_AHCI_P_IX_HBD 0x10000000
#define ATA_AHCI_P_IX_HBF 0x20000000
#define ATA_AHCI_P_IX_TFE 0x40000000
#define ATA_AHCI_P_IX_CPD 0x80000000
#define ATA_AHCI_P_CMD 0x118
#define ATA_AHCI_P_CMD_ST 0x00000001
#define ATA_AHCI_P_CMD_SUD 0x00000002
#define ATA_AHCI_P_CMD_POD 0x00000004
#define ATA_AHCI_P_CMD_CLO 0x00000008
#define ATA_AHCI_P_CMD_FRE 0x00000010
#define ATA_AHCI_P_CMD_CCS_MASK 0x00001f00
#define ATA_AHCI_P_CMD_ISS 0x00002000
#define ATA_AHCI_P_CMD_FR 0x00004000
#define ATA_AHCI_P_CMD_CR 0x00008000
#define ATA_AHCI_P_CMD_CPS 0x00010000
#define ATA_AHCI_P_CMD_PMA 0x00020000
#define ATA_AHCI_P_CMD_HPCP 0x00040000
#define ATA_AHCI_P_CMD_ISP 0x00080000
#define ATA_AHCI_P_CMD_CPD 0x00100000
#define ATA_AHCI_P_CMD_ATAPI 0x01000000
#define ATA_AHCI_P_CMD_DLAE 0x02000000
#define ATA_AHCI_P_CMD_ALPE 0x04000000
#define ATA_AHCI_P_CMD_ASP 0x08000000
#define ATA_AHCI_P_CMD_ICC_MASK 0xf0000000
#define ATA_AHCI_P_CMD_NOOP 0x00000000
#define ATA_AHCI_P_CMD_ACTIVE 0x10000000
#define ATA_AHCI_P_CMD_PARTIAL 0x20000000
#define ATA_AHCI_P_CMD_SLUMBER 0x60000000
#define ATA_AHCI_P_TFD 0x120
#define ATA_AHCI_P_SIG 0x124
#define ATA_AHCI_P_SSTS 0x128
#define ATA_AHCI_P_SCTL 0x12c
#define ATA_AHCI_P_SERR 0x130
#define ATA_AHCI_P_SACT 0x134
#define ATA_AHCI_P_CI 0x138
#define ATA_AHCI_P_SNTF 0x13C
#define ATA_AHCI_P_FBS 0x140
#define ATA_AHCI_CL_SIZE 32
#define ATA_AHCI_CL_OFFSET 0
#define ATA_AHCI_FB_OFFSET (ATA_AHCI_CL_SIZE * 32)
#define ATA_AHCI_CT_OFFSET (ATA_AHCI_FB_OFFSET + 4096)
#define ATA_AHCI_CT_SIZE (2176 + 128)
struct ata_ahci_dma_prd {
u_int64_t dba;
u_int32_t reserved;
u_int32_t dbc; /* 0 based */
#define ATA_AHCI_PRD_MASK 0x003fffff /* max 4MB */
#define ATA_AHCI_PRD_IPC (1<<31)
} __packed;
struct ata_ahci_cmd_tab {
u_int8_t cfis[64];
u_int8_t acmd[32];
u_int8_t reserved[32];
#define ATA_AHCI_DMA_ENTRIES 129
struct ata_ahci_dma_prd prd_tab[ATA_AHCI_DMA_ENTRIES];
} __packed;
struct ata_ahci_cmd_list {
u_int16_t cmd_flags;
#define ATA_AHCI_CMD_ATAPI 0x0020
#define ATA_AHCI_CMD_WRITE 0x0040
#define ATA_AHCI_CMD_PREFETCH 0x0080
#define ATA_AHCI_CMD_RESET 0x0100
#define ATA_AHCI_CMD_BIST 0x0200
#define ATA_AHCI_CMD_CLR_BUSY 0x0400
u_int16_t prd_length; /* PRD entries */
u_int32_t bytecount;
u_int64_t cmd_table_phys; /* 128byte aligned */
} __packed;
/* DMA register defines */
#define ATA_DMA_ENTRIES 256
#define ATA_DMA_EOT 0x80000000
#define ATA_BMCMD_PORT 17
#define ATA_BMCMD_START_STOP 0x01
#define ATA_BMCMD_WRITE_READ 0x08
#define ATA_BMDEVSPEC_0 18
#define ATA_BMSTAT_PORT 19
#define ATA_BMSTAT_ACTIVE 0x01
#define ATA_BMSTAT_ERROR 0x02
#define ATA_BMSTAT_INTERRUPT 0x04
#define ATA_BMSTAT_MASK 0x07
#define ATA_BMSTAT_DMA_MASTER 0x20
#define ATA_BMSTAT_DMA_SLAVE 0x40
#define ATA_BMSTAT_DMA_SIMPLEX 0x80
#define ATA_BMDEVSPEC_1 20
#define ATA_BMDTP_PORT 21
#define ATA_IDX_ADDR 22
#define ATA_IDX_DATA 23
#define ATA_MAX_RES 24
/* misc defines */
#define ATA_PRIMARY 0x1f0
#define ATA_SECONDARY 0x170
#define ATA_PC98_BANK 0x432
#define ATA_IOSIZE 0x08
#define ATA_PC98_IOSIZE 0x10
#define ATA_CTLIOSIZE 0x01
#define ATA_BMIOSIZE 0x08
#define ATA_PC98_BANKIOSIZE 0x01
#define ATA_IOADDR_RID 0
#define ATA_CTLADDR_RID 1
#define ATA_BMADDR_RID 0x20
#define ATA_PC98_CTLADDR_RID 8
#define ATA_PC98_BANKADDR_RID 9
#define ATA_IRQ_RID 0
#define ATA_DEV(unit) ((unit > 0) ? 0x10 : 0)
#define ATA_CFA_MAGIC1 0x844A
#define ATA_CFA_MAGIC2 0x848A
#define ATA_CFA_MAGIC3 0x8400
#define ATAPI_MAGIC_LSB 0x14
#define ATAPI_MAGIC_MSB 0xeb
#define ATAPI_P_READ (ATA_S_DRQ | ATA_I_IN)
#define ATAPI_P_WRITE (ATA_S_DRQ)
#define ATAPI_P_CMDOUT (ATA_S_DRQ | ATA_I_CMD)
#define ATAPI_P_DONEDRQ (ATA_S_DRQ | ATA_I_CMD | ATA_I_IN)
#define ATAPI_P_DONE (ATA_I_CMD | ATA_I_IN)
#define ATAPI_P_ABORT 0
#define ATA_INTR_FLAGS (INTR_MPSAFE|INTR_TYPE_BIO|INTR_ENTROPY)
#define ATA_OP_CONTINUES 0
#define ATA_OP_FINISHED 1
#define ATA_MAX_28BIT_LBA 268435455UL
#ifndef ATA_REQUEST_TIMEOUT
#define ATA_REQUEST_TIMEOUT 10
#endif
/* structure used for composite atomic operations */
#define MAX_COMPOSITES 32 /* u_int32_t bits */
struct ata_composite {
struct mtx lock; /* control lock */
u_int32_t rd_needed; /* needed read subdisks */
u_int32_t rd_done; /* done read subdisks */
u_int32_t wr_needed; /* needed write subdisks */
u_int32_t wr_depend; /* write depends on subdisks */
u_int32_t wr_done; /* done write subdisks */
struct ata_request *request[MAX_COMPOSITES];
u_int32_t residual; /* bytes still to transfer */
caddr_t data_1;
caddr_t data_2;
};
/* structure used to queue an ATA/ATAPI request */
struct ata_request {
device_t dev; /* device handle */
device_t parent; /* channel handle */
int unit; /* physical unit */
union {
struct {
u_int8_t command; /* command reg */
u_int16_t feature; /* feature reg */
u_int16_t count; /* count reg */
u_int64_t lba; /* lba reg */
} ata;
struct {
u_int8_t ccb[16]; /* ATAPI command block */
struct atapi_sense sense; /* ATAPI request sense data */
u_int8_t saved_cmd; /* ATAPI saved command */
} atapi;
} u;
u_int32_t bytecount; /* bytes to transfer */
u_int32_t transfersize; /* bytes pr transfer */
caddr_t data; /* pointer to data buf */
u_int32_t tag; /* HW tag of this request */
int flags;
#define ATA_R_CONTROL 0x00000001
#define ATA_R_READ 0x00000002
#define ATA_R_WRITE 0x00000004
#define ATA_R_ATAPI 0x00000008
#define ATA_R_DMA 0x00000010
#define ATA_R_QUIET 0x00000020
#define ATA_R_TIMEOUT 0x00000040
#define ATA_R_48BIT 0x00000080
#define ATA_R_ORDERED 0x00000100
#define ATA_R_AT_HEAD 0x00000200
#define ATA_R_REQUEUE 0x00000400
#define ATA_R_THREAD 0x00000800
#define ATA_R_DIRECT 0x00001000
#define ATA_R_ATAPI16 0x00010000
#define ATA_R_ATAPI_INTR 0x00020000
#define ATA_R_DEBUG 0x10000000
#define ATA_R_DANGER1 0x20000000
#define ATA_R_DANGER2 0x40000000
struct ata_dmaslot *dma; /* DMA slot of this request */
u_int8_t status; /* ATA status */
u_int8_t error; /* ATA error */
u_int32_t donecount; /* bytes transferred */
int result; /* result error code */
void (*callback)(struct ata_request *request);
struct sema done; /* request done sema */
int retries; /* retry count */
int timeout; /* timeout for this cmd */
struct callout callout; /* callout management */
struct task task; /* task management */
struct bio *bio; /* bio for this request */
int this; /* this request ID */
struct ata_composite *composite; /* for composite atomic ops */
void *driver; /* driver specific */
TAILQ_ENTRY(ata_request) chain; /* list management */
#ifdef ATA_CAM
union ccb *ccb;
#endif
};
/* define this for debugging request processing */
#if 0
#define ATA_DEBUG_RQ(request, string) \
{ \
if (request->flags & ATA_R_DEBUG) \
device_printf(request->parent, "req=%p %s " string "\n", \
request, ata_cmd2str(request)); \
}
#else
#define ATA_DEBUG_RQ(request, string)
#endif
/* structure describing an ATA/ATAPI device */
struct ata_device {
device_t dev; /* device handle */
int unit; /* physical unit */
#define ATA_MASTER 0x00
#define ATA_SLAVE 0x01
#define ATA_PM 0x0f
struct ata_params param; /* ata param structure */
int mode; /* current transfermode */
u_int32_t max_iosize; /* max IO size */
int spindown; /* idle spindown timeout */
struct callout spindown_timer;
int spindown_state;
int flags;
#define ATA_D_USE_CHS 0x0001
#define ATA_D_MEDIA_CHANGED 0x0002
#define ATA_D_ENC_PRESENT 0x0004
};
/* structure for holding DMA Physical Region Descriptors (PRD) entries */
struct ata_dma_prdentry {
u_int32_t addr;
u_int32_t count;
};
/* structure used by the setprd function */
struct ata_dmasetprd_args {
void *dmatab;
int nsegs;
int error;
};
struct ata_dmaslot {
u_int8_t status; /* DMA status */
bus_dma_tag_t sg_tag; /* SG list DMA tag */
bus_dmamap_t sg_map; /* SG list DMA map */
void *sg; /* DMA transfer table */
bus_addr_t sg_bus; /* bus address of dmatab */
bus_dma_tag_t data_tag; /* data DMA tag */
bus_dmamap_t data_map; /* data DMA map */
};
/* structure holding DMA related information */
struct ata_dma {
bus_dma_tag_t dmatag; /* parent DMA tag */
bus_dma_tag_t work_tag; /* workspace DMA tag */
bus_dmamap_t work_map; /* workspace DMA map */
u_int8_t *work; /* workspace */
bus_addr_t work_bus; /* bus address of dmatab */
#define ATA_DMA_SLOTS 1
int dma_slots; /* DMA slots allocated */
struct ata_dmaslot slot[ATA_DMA_SLOTS];
u_int32_t alignment; /* DMA SG list alignment */
u_int32_t boundary; /* DMA SG list boundary */
u_int32_t segsize; /* DMA SG list segment size */
u_int32_t max_iosize; /* DMA data max IO size */
u_int64_t max_address; /* highest DMA'able address */
int flags;
#define ATA_DMA_ACTIVE 0x01 /* DMA transfer in progress */
void (*alloc)(device_t dev);
void (*free)(device_t dev);
void (*setprd)(void *xsc, bus_dma_segment_t *segs, int nsegs, int error);
int (*load)(struct ata_request *request, void *addr, int *nsegs);
int (*unload)(struct ata_request *request);
int (*start)(struct ata_request *request);
int (*stop)(struct ata_request *request);
void (*reset)(device_t dev);
};
/* structure holding lowlevel functions */
struct ata_lowlevel {
u_int32_t (*softreset)(device_t dev, int pmport);
int (*pm_read)(device_t dev, int port, int reg, u_int32_t *result);
int (*pm_write)(device_t dev, int port, int reg, u_int32_t value);
int (*status)(device_t dev);
int (*begin_transaction)(struct ata_request *request);
int (*end_transaction)(struct ata_request *request);
int (*command)(struct ata_request *request);
void (*tf_read)(struct ata_request *request);
void (*tf_write)(struct ata_request *request);
};
/* structure holding resources for an ATA channel */
struct ata_resource {
struct resource *res;
int offset;
};
#ifdef ATA_CAM
struct ata_cam_device {
u_int revision;
int mode;
u_int bytecount;
u_int atapi;
u_int caps;
};
#endif
/* structure describing an ATA channel */
struct ata_channel {
device_t dev; /* device handle */
int unit; /* physical channel */
int attached; /* channel is attached */
struct ata_resource r_io[ATA_MAX_RES];/* I/O resources */
struct resource *r_irq; /* interrupt of this channel */
void *ih; /* interrupt handle */
struct ata_lowlevel hw; /* lowlevel HW functions */
struct ata_dma dma; /* DMA data / functions */
int flags; /* channel flags */
#define ATA_NO_SLAVE 0x01
#define ATA_USE_16BIT 0x02
#define ATA_ATAPI_DMA_RO 0x04
#define ATA_NO_48BIT_DMA 0x08
#define ATA_ALWAYS_DMASTAT 0x10
#define ATA_CHECKS_CABLE 0x20
#define ATA_NO_ATAPI_DMA 0x40
#define ATA_SATA 0x80
#define ATA_DMA_BEFORE_CMD 0x100
#define ATA_KNOWN_PRESENCE 0x200
#define ATA_STATUS_IS_LONG 0x400
#define ATA_PERIODIC_POLL 0x800
int pm_level; /* power management level */
int devices; /* what is present */
#define ATA_ATA_MASTER 0x00000001
#define ATA_ATA_SLAVE 0x00000002
#define ATA_PORTMULTIPLIER 0x00008000
#define ATA_ATAPI_MASTER 0x00010000
#define ATA_ATAPI_SLAVE 0x00020000
struct mtx state_mtx; /* state lock */
int state; /* ATA channel state */
#define ATA_IDLE 0x0000
#define ATA_ACTIVE 0x0001
#define ATA_STALL_QUEUE 0x0002
struct mtx queue_mtx; /* queue lock */
TAILQ_HEAD(, ata_request) ata_queue; /* head of ATA queue */
struct ata_request *freezepoint; /* composite freezepoint */
struct ata_request *running; /* currently running request */
struct task conntask; /* PHY events handling task */
#ifdef ATA_CAM
struct cam_sim *sim;
struct cam_path *path;
struct ata_cam_device user[16]; /* User-specified settings */
struct ata_cam_device curr[16]; /* Current settings */
int requestsense; /* CCB waiting for SENSE. */
#endif
struct callout poll_callout; /* Periodic status poll. */
};
/* disk bay/enclosure related */
#define ATA_LED_OFF 0x00
#define ATA_LED_RED 0x01
#define ATA_LED_GREEN 0x02
#define ATA_LED_ORANGE 0x03
#define ATA_LED_MASK 0x03
/* externs */
extern int (*ata_raid_ioctl_func)(u_long cmd, caddr_t data);
extern struct intr_config_hook *ata_delayed_attach;
extern devclass_t ata_devclass;
extern int ata_wc;
extern int ata_setmax;
extern int ata_dma_check_80pin;
/* public prototypes */
/* ata-all.c: */
int ata_probe(device_t dev);
int ata_attach(device_t dev);
int ata_detach(device_t dev);
int ata_reinit(device_t dev);
int ata_suspend(device_t dev);
int ata_resume(device_t dev);
void ata_interrupt(void *data);
int ata_device_ioctl(device_t dev, u_long cmd, caddr_t data);
int ata_getparam(struct ata_device *atadev, int init);
int ata_identify(device_t dev);
void ata_default_registers(device_t dev);
void ata_modify_if_48bit(struct ata_request *request);
void ata_udelay(int interval);
const char *ata_unit2str(struct ata_device *atadev);
const char *ata_mode2str(int mode);
int ata_str2mode(const char *str);
const char *ata_satarev2str(int rev);
int ata_atapi(device_t dev, int target);
int ata_pmode(struct ata_params *ap);
int ata_wmode(struct ata_params *ap);
int ata_umode(struct ata_params *ap);
int ata_limit_mode(device_t dev, int mode, int maxmode);
void ata_setmode(device_t dev);
void ata_print_cable(device_t dev, u_int8_t *who);
int ata_check_80pin(device_t dev, int mode);
#ifdef ATA_CAM
void ata_cam_begin_transaction(device_t dev, union ccb *ccb);
void ata_cam_end_transaction(device_t dev, struct ata_request *request);
#endif
/* ata-queue.c: */
int ata_controlcmd(device_t dev, u_int8_t command, u_int16_t feature, u_int64_t lba, u_int16_t count);
int ata_atapicmd(device_t dev, u_int8_t *ccb, caddr_t data, int count, int flags, int timeout);
void ata_queue_request(struct ata_request *request);
void ata_start(device_t dev);
void ata_finish(struct ata_request *request);
void ata_timeout(struct ata_request *);
void ata_catch_inflight(device_t dev);
void ata_fail_requests(device_t dev);
void ata_drop_requests(device_t dev);
const char *ata_cmd2str(struct ata_request *request);
/* ata-lowlevel.c: */
void ata_generic_hw(device_t dev);
int ata_begin_transaction(struct ata_request *);
int ata_end_transaction(struct ata_request *);
void ata_generic_reset(device_t dev);
int ata_generic_command(struct ata_request *request);
/* ata-dma.c: */
void ata_dmainit(device_t);
void ata_dmafini(device_t dev);
/* ata-sata.c: */
void ata_sata_phy_check_events(device_t dev, int port);
int ata_sata_scr_read(struct ata_channel *ch, int port, int reg, uint32_t *val);
int ata_sata_scr_write(struct ata_channel *ch, int port, int reg, uint32_t val);
int ata_sata_phy_reset(device_t dev, int port, int quick);
int ata_sata_setmode(device_t dev, int target, int mode);
int ata_sata_getrev(device_t dev, int target);
int ata_request2fis_h2d(struct ata_request *request, u_int8_t *fis);
void ata_pm_identify(device_t dev);
/* macros for alloc/free of struct ata_request */
extern uma_zone_t ata_request_zone;
#define ata_alloc_request() uma_zalloc(ata_request_zone, M_NOWAIT | M_ZERO)
#define ata_free_request(request) { \
if (!(request->flags & ATA_R_DANGER2)) \
uma_zfree(ata_request_zone, request); \
}
/* macros for alloc/free of struct ata_composite */
extern uma_zone_t ata_composite_zone;
#define ata_alloc_composite() uma_zalloc(ata_composite_zone, M_NOWAIT | M_ZERO)
#define ata_free_composite(composite) uma_zfree(ata_composite_zone, composite)
MALLOC_DECLARE(M_ATA);
/* misc newbus defines */
#define GRANDPARENT(dev) device_get_parent(device_get_parent(dev))
/* macros to hide busspace uglyness */
#define ATA_INB(res, offset) \
bus_read_1((res), (offset))
#define ATA_INW(res, offset) \
bus_read_2((res), (offset))
#define ATA_INL(res, offset) \
bus_read_4((res), (offset))
#define ATA_INSW(res, offset, addr, count) \
bus_read_multi_2((res), (offset), (addr), (count))
#define ATA_INSW_STRM(res, offset, addr, count) \
bus_read_multi_stream_2((res), (offset), (addr), (count))
#define ATA_INSL(res, offset, addr, count) \
bus_read_multi_4((res), (offset), (addr), (count))
#define ATA_INSL_STRM(res, offset, addr, count) \
bus_read_multi_stream_4((res), (offset), (addr), (count))
#define ATA_OUTB(res, offset, value) \
bus_write_1((res), (offset), (value))
#define ATA_OUTW(res, offset, value) \
bus_write_2((res), (offset), (value))
#define ATA_OUTL(res, offset, value) \
bus_write_4((res), (offset), (value))
#define ATA_OUTSW(res, offset, addr, count) \
bus_write_multi_2((res), (offset), (addr), (count))
#define ATA_OUTSW_STRM(res, offset, addr, count) \
bus_write_multi_stream_2((res), (offset), (addr), (count))
#define ATA_OUTSL(res, offset, addr, count) \
bus_write_multi_4((res), (offset), (addr), (count))
#define ATA_OUTSL_STRM(res, offset, addr, count) \
bus_write_multi_stream_4((res), (offset), (addr), (count))
#define ATA_IDX_INB(ch, idx) \
ATA_INB(ch->r_io[idx].res, ch->r_io[idx].offset)
#define ATA_IDX_INW(ch, idx) \
ATA_INW(ch->r_io[idx].res, ch->r_io[idx].offset)
#define ATA_IDX_INL(ch, idx) \
ATA_INL(ch->r_io[idx].res, ch->r_io[idx].offset)
#define ATA_IDX_INSW(ch, idx, addr, count) \
ATA_INSW(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
#define ATA_IDX_INSW_STRM(ch, idx, addr, count) \
ATA_INSW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
#define ATA_IDX_INSL(ch, idx, addr, count) \
ATA_INSL(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
#define ATA_IDX_INSL_STRM(ch, idx, addr, count) \
ATA_INSL_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
#define ATA_IDX_OUTB(ch, idx, value) \
ATA_OUTB(ch->r_io[idx].res, ch->r_io[idx].offset, value)
#define ATA_IDX_OUTW(ch, idx, value) \
ATA_OUTW(ch->r_io[idx].res, ch->r_io[idx].offset, value)
#define ATA_IDX_OUTL(ch, idx, value) \
ATA_OUTL(ch->r_io[idx].res, ch->r_io[idx].offset, value)
#define ATA_IDX_OUTSW(ch, idx, addr, count) \
ATA_OUTSW(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
#define ATA_IDX_OUTSW_STRM(ch, idx, addr, count) \
ATA_OUTSW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
#define ATA_IDX_OUTSL(ch, idx, addr, count) \
ATA_OUTSL(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)
#define ATA_IDX_OUTSL_STRM(ch, idx, addr, count) \
ATA_OUTSL_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count)