| Current Path : /sys/dev/ath/ath_hal/ar5210/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/dev/ath/ath_hal/ar5210/ar5210reg.h |
/* * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * Copyright (c) 2002-2004 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $FreeBSD: release/9.1.0/sys/dev/ath/ath_hal/ar5210/ar5210reg.h 229733 2012-01-06 21:19:43Z dim $ */ #ifndef _DEV_ATH_AR5210REG_H #define _DEV_ATH_AR5210REG_H /* * Register defintions for the Atheros AR5210/5110 MAC/Basedband * Processor for IEEE 802.11a 5-GHz Wireless LANs. */ #ifndef PCI_VENDOR_ATHEROS #define PCI_VENDOR_ATHEROS 0x168c #endif #define PCI_PRODUCT_ATHEROS_AR5210 0x0007 #define PCI_PRODUCT_ATHEROS_AR5210_OLD 0x0004 /* DMA Registers */ #define AR_TXDP0 0x0000 /* TX queue pointer 0 register */ #define AR_TXDP1 0x0004 /* TX queue pointer 1 register */ #define AR_CR 0x0008 /* Command register */ #define AR_RXDP 0x000c /* RX queue descriptor ptr register */ #define AR_CFG 0x0014 /* Configuration and status register */ #define AR_ISR 0x001c /* Interrupt status register */ #define AR_IMR 0x0020 /* Interrupt mask register */ #define AR_IER 0x0024 /* Interrupt global enable register */ #define AR_BCR 0x0028 /* Beacon control register */ #define AR_BSR 0x002c /* Beacon status register */ #define AR_TXCFG 0x0030 /* TX configuration register */ #define AR_RXCFG 0x0034 /* RX configuration register */ #define AR_MIBC 0x0040 /* MIB control register */ #define AR_TOPS 0x0044 /* Timeout prescale register */ #define AR_RXNOFRM 0x0048 /* RX no frame timeout register */ #define AR_TXNOFRM 0x004c /* TX no frame timeout register */ #define AR_RPGTO 0x0050 /* RX frame gap timeout register */ #define AR_RFCNT 0x0054 /* RX frame count limit register */ #define AR_MISC 0x0058 /* Misc control and status register */ #define AR_RC 0x4000 /* Reset control */ #define AR_SCR 0x4004 /* Sleep control */ #define AR_INTPEND 0x4008 /* Interrupt pending */ #define AR_SFR 0x400c /* Force sleep */ #define AR_PCICFG 0x4010 /* PCI configuration */ #define AR_GPIOCR 0x4014 /* GPIO configuration */ #define AR_GPIODO 0x4018 /* GPIO data output */ #define AR_GPIODI 0x401c /* GPIO data input */ #define AR_SREV 0x4020 /* Silicon revision */ /* EEPROM Access Registers */ #define AR_EP_AIR_BASE 0x6000 /* EEPROM access initiation regs base */ #define AR_EP_AIR(n) (AR_EP_AIR_BASE + (n)*4) #define AR_EP_RDATA 0x6800 /* EEPROM read data register */ #define AR_EP_STA 0x6c00 /* EEPROM access status register */ /* PCU Registers */ #define AR_STA_ID0 0x8000 /* Lower 32bits of MAC address */ #define AR_STA_ID1 0x8004 /* Upper 16bits of MAC address */ #define AR_BSS_ID0 0x8008 /* Lower 32bits of BSSID */ #define AR_BSS_ID1 0x800c /* Upper 16bits of BSSID */ #define AR_SLOT_TIME 0x8010 /* Length of a back-off */ #define AR_TIME_OUT 0x8014 /* Timeout to wait for ACK and CTS */ #define AR_RSSI_THR 0x8018 /* Beacon RSSI warning threshold */ #define AR_RETRY_LMT 0x801c /* Short and long frame retry limit */ #define AR_USEC 0x8020 /* Transmit latency */ #define AR_BEACON 0x8024 /* Beacon control */ #define AR_CFP_PERIOD 0x8028 /* CFP period */ #define AR_TIMER0 0x802c /* Next beacon time */ #define AR_TIMER1 0x8030 /* Next DMA beacon alert time */ #define AR_TIMER2 0x8034 /* Next software beacon alert time */ #define AR_TIMER3 0x8038 /* Next ATIM window time */ #define AR_IFS0 0x8040 /* Protocol timers */ #define AR_IFS1 0x8044 /* Protocol time and control */ #define AR_CFP_DUR 0x8048 /* Maximum CFP duration */ #define AR_RX_FILTER 0x804c /* Receive filter */ #define AR_MCAST_FIL0 0x8050 /* Lower 32bits of mcast filter mask */ #define AR_MCAST_FIL1 0x8054 /* Upper 16bits of mcast filter mask */ #define AR_TX_MASK0 0x8058 /* Lower 32bits of TX mask */ #define AR_TX_MASK1 0x805c /* Upper 16bits of TX mask */ #define AR_CLR_TMASK 0x8060 /* Clear TX mask */ #define AR_TRIG_LEV 0x8064 /* Minimum FIFO fill level before TX */ #define AR_DIAG_SW 0x8068 /* PCU control */ #define AR_TSF_L32 0x806c /* Lower 32bits of local clock */ #define AR_TSF_U32 0x8070 /* Upper 32bits of local clock */ #define AR_LAST_TSTP 0x8080 /* Lower 32bits of last beacon tstamp */ #define AR_RETRY_CNT 0x8084 /* Current short or long retry cnt */ #define AR_BACKOFF 0x8088 /* Back-off status */ #define AR_NAV 0x808c /* Current NAV value */ #define AR_RTS_OK 0x8090 /* RTS success counter */ #define AR_RTS_FAIL 0x8094 /* RTS failure counter */ #define AR_ACK_FAIL 0x8098 /* ACK failure counter */ #define AR_FCS_FAIL 0x809c /* FCS failure counter */ #define AR_BEACON_CNT 0x80a0 /* Valid beacon counter */ #define AR_KEYTABLE_0 0x9000 /* Encryption key table */ #define AR_KEYTABLE(n) (AR_KEYTABLE_0 + ((n)*32)) #define AR_CR_TXE0 0x00000001 /* TX queue 0 enable */ #define AR_CR_TXE1 0x00000002 /* TX queue 1 enable */ #define AR_CR_RXE 0x00000004 /* RX enable */ #define AR_CR_TXD0 0x00000008 /* TX queue 0 disable */ #define AR_CR_TXD1 0x00000010 /* TX queue 1 disable */ #define AR_CR_RXD 0x00000020 /* RX disable */ #define AR_CR_SWI 0x00000040 /* software interrupt */ #define AR_CR_BITS \ "\20\1TXE0\2TXE1\3RXE\4TXD0\5TXD1\6RXD\7SWI" #define AR_CFG_SWTD 0x00000001 /* BE for TX desc */ #define AR_CFG_SWTB 0x00000002 /* BE for TX data */ #define AR_CFG_SWRD 0x00000004 /* BE for RX desc */ #define AR_CFG_SWRB 0x00000008 /* BE for RX data */ #define AR_CFG_SWRG 0x00000010 /* BE for registers */ #define AR_CFG_EEBS 0x00000200 /* EEPROM busy */ #define AR_CFG_TXCNT 0x00007800 /* number of TX desc in Q */ #define AR_CFG_TXCNT_S 11 #define AR_CFG_TXFSTAT 0x00008000 /* TX DMA status */ #define AR_CFG_TXFSTRT 0x00010000 /* re-enable TX DMA */ #define AR_CFG_BITS \ "\20\1SWTD\2SWTB\3SWRD\4SWRB\5SWRG\14EEBS\17TXFSTAT\20TXFSTRT" #define AR_ISR_RXOK_INT 0x00000001 /* RX frame OK */ #define AR_ISR_RXDESC_INT 0x00000002 /* RX intr request */ #define AR_ISR_RXERR_INT 0x00000004 /* RX error */ #define AR_ISR_RXNOFRM_INT 0x00000008 /* no frame received */ #define AR_ISR_RXEOL_INT 0x00000010 /* RX desc empty */ #define AR_ISR_RXORN_INT 0x00000020 /* RX fifo overrun */ #define AR_ISR_TXOK_INT 0x00000040 /* TX frame OK */ #define AR_ISR_TXDESC_INT 0x00000080 /* TX intr request */ #define AR_ISR_TXERR_INT 0x00000100 /* TX error */ #define AR_ISR_TXNOFRM_INT 0x00000200 /* no frame transmitted */ #define AR_ISR_TXEOL_INT 0x00000400 /* TX desc empty */ #define AR_ISR_TXURN_INT 0x00000800 /* TX fifo underrun */ #define AR_ISR_MIB_INT 0x00001000 /* MIB interrupt */ #define AR_ISR_SWI_INT 0x00002000 /* software interrupt */ #define AR_ISR_RXPHY_INT 0x00004000 /* PHY RX error */ #define AR_ISR_RXKCM_INT 0x00008000 /* Key cache miss */ #define AR_ISR_SWBA_INT 0x00010000 /* software beacon alert */ #define AR_ISR_BRSSI_INT 0x00020000 /* beacon threshold */ #define AR_ISR_BMISS_INT 0x00040000 /* beacon missed */ #define AR_ISR_MCABT_INT 0x00100000 /* master cycle abort */ #define AR_ISR_SSERR_INT 0x00200000 /* SERR on PCI */ #define AR_ISR_DPERR_INT 0x00400000 /* Parity error on PCI */ #define AR_ISR_GPIO_INT 0x01000000 /* GPIO interrupt */ #define AR_ISR_BITS \ "\20\1RXOK\2RXDESC\3RXERR\4RXNOFM\5RXEOL\6RXORN\7TXOK\10TXDESC"\ "\11TXERR\12TXNOFRM\13TXEOL\14TXURN\15MIB\16SWI\17RXPHY\20RXKCM"\ "\21SWBA\22BRSSI\23BMISS\24MCABT\25SSERR\26DPERR\27GPIO" #define AR_IMR_RXOK_INT 0x00000001 /* RX frame OK */ #define AR_IMR_RXDESC_INT 0x00000002 /* RX intr request */ #define AR_IMR_RXERR_INT 0x00000004 /* RX error */ #define AR_IMR_RXNOFRM_INT 0x00000008 /* no frame received */ #define AR_IMR_RXEOL_INT 0x00000010 /* RX desc empty */ #define AR_IMR_RXORN_INT 0x00000020 /* RX fifo overrun */ #define AR_IMR_TXOK_INT 0x00000040 /* TX frame OK */ #define AR_IMR_TXDESC_INT 0x00000080 /* TX intr request */ #define AR_IMR_TXERR_INT 0x00000100 /* TX error */ #define AR_IMR_TXNOFRM_INT 0x00000200 /* no frame transmitted */ #define AR_IMR_TXEOL_INT 0x00000400 /* TX desc empty */ #define AR_IMR_TXURN_INT 0x00000800 /* TX fifo underrun */ #define AR_IMR_MIB_INT 0x00001000 /* MIB interrupt */ #define AR_IMR_SWI_INT 0x00002000 /* software interrupt */ #define AR_IMR_RXPHY_INT 0x00004000 /* PHY RX error */ #define AR_IMR_RXKCM_INT 0x00008000 /* Key cache miss */ #define AR_IMR_SWBA_INT 0x00010000 /* software beacon alert */ #define AR_IMR_BRSSI_INT 0x00020000 /* beacon threshold */ #define AR_IMR_BMISS_INT 0x00040000 /* beacon missed */ #define AR_IMR_MCABT_INT 0x00100000 /* master cycle abort */ #define AR_IMR_SSERR_INT 0x00200000 /* SERR on PCI */ #define AR_IMR_DPERR_INT 0x00400000 /* Parity error on PCI */ #define AR_IMR_GPIO_INT 0x01000000 /* GPIO interrupt */ #define AR_IMR_BITS AR_ISR_BITS #define AR_IER_DISABLE 0x00000000 /* pseudo-flag */ #define AR_IER_ENABLE 0x00000001 /* global interrupt enable */ #define AR_IER_BITS "\20\1ENABLE" #define AR_BCR_BCMD 0x00000001 /* ad hoc beacon mode */ #define AR_BCR_BDMAE 0x00000002 /* beacon DMA enable */ #define AR_BCR_TQ1FV 0x00000004 /* use TXQ1 for non-beacon */ #define AR_BCR_TQ1V 0x00000008 /* TXQ1 valid for beacon */ #define AR_BCR_BCGET 0x00000010 /* force a beacon fetch */ #define AR_BCR_BITS "\20\1BCMD\2BDMAE\3TQ1FV\4TQ1V\5BCGET" #define AR_BSR_BDLYSW 0x00000001 /* software beacon delay */ #define AR_BSR_BDLYDMA 0x00000002 /* DMA beacon delay */ #define AR_BSR_TXQ1F 0x00000004 /* TXQ1 fetch */ #define AR_BSR_ATIMDLY 0x00000008 /* ATIM delay */ #define AR_BSR_SNPBCMD 0x00000100 /* snapshot of BCMD */ #define AR_BSR_SNPBDMAE 0x00000200 /* snapshot of BDMAE */ #define AR_BSR_SNPTQ1FV 0x00000400 /* snapshot of TQ1FV */ #define AR_BSR_SNPTQ1V 0x00000800 /* snapshot of TQ1V */ #define AR_BSR_SNAPPEDBCRVALID 0x00001000 /* snapshot of BCR are valid */ #define AR_BSR_SWBA_CNT 0x00ff0000 /* software beacon alert cnt */ #define AR_BSR_BITS \ "\20\1BDLYSW\2BDLYDMA\3TXQ1F\4ATIMDLY\11SNPBCMD\12SNPBDMAE"\ "\13SNPTQ1FV\14SNPTQ1V\15SNAPPEDBCRVALID" #define AR_TXCFG_SDMAMR 0x00000007 /* DMA burst size 2^(2+x) */ #define AR_TXCFG_TXFSTP 0x00000008 /* Stop TX DMA on filtered */ #define AR_TXCFG_TXFULL 0x00000070 /* TX DMA desc Q full thresh */ #define AR_TXCFG_TXCONT_EN 0x00000080 /* Enable continuous TX mode */ #define AR_TXCFG_BITS "\20\3TXFSTP\7TXCONT_EN" #define AR_RXCFG_SDMAMW 0x00000007 /* DMA burst size 2^(2+x) */ #define AR_RXCFG_ZLFDMA 0x00000010 /* enable zero length DMA */ /* DMA sizes used for both AR_TXCFG_SDMAMR and AR_RXCFG_SDMAMW */ #define AR_DMASIZE_4B 0 /* DMA size 4 bytes */ #define AR_DMASIZE_8B 1 /* DMA size 8 bytes */ #define AR_DMASIZE_16B 2 /* DMA size 16 bytes */ #define AR_DMASIZE_32B 3 /* DMA size 32 bytes */ #define AR_DMASIZE_64B 4 /* DMA size 64 bytes */ #define AR_DMASIZE_128B 5 /* DMA size 128 bytes */ #define AR_DMASIZE_256B 6 /* DMA size 256 bytes */ #define AR_DMASIZE_512B 7 /* DMA size 512 bytes */ #define AR_MIBC_COW 0x00000001 /* counter overflow warning */ #define AR_MIBC_FMC 0x00000002 /* freeze MIB counters */ #define AR_MIBC_CMC 0x00000004 /* clear MIB counters */ #define AR_MIBC_MCS 0x00000008 /* MIB counter strobe */ #define AR_RFCNT_RFCL 0x0000000f /* RX frame count limit */ #define AR_MISC_LED_DECAY 0x001c0000 /* LED decay rate */ #define AR_MISC_LED_BLINK 0x00e00000 /* LED blink rate */ #define AR_RC_RPCU 0x00000001 /* PCU Warm Reset */ #define AR_RC_RDMA 0x00000002 /* DMA Warm Reset */ #define AR_RC_RMAC 0x00000004 /* MAC Warm Reset */ #define AR_RC_RPHY 0x00000008 /* PHY Warm Reset */ #define AR_RC_RPCI 0x00000010 /* PCI Core Warm Reset */ #define AR_RC_BITS "\20\1RPCU\2RDMA\3RMAC\4RPHY\5RPCI" #define AR_SCR_SLDUR 0x0000ffff /* sleep duration */ #define AR_SCR_SLE 0x00030000 /* sleep enable */ #define AR_SCR_SLE_S 16 /* * The previous values for the following three defines were: * * AR_SCR_SLE_WAKE 0x00000000 * AR_SCR_SLE_SLP 0x00010000 * AR_SCR_SLE_ALLOW 0x00020000 * * However, these have been pre-shifted with AR_SCR_SLE_S. The * OS_REG_READ() macro would attempt to shift them again, effectively * shifting out any of the set bits completely. */ #define AR_SCR_SLE_WAKE 0 /* force wake */ #define AR_SCR_SLE_SLP 1 /* force sleep */ #define AR_SCR_SLE_ALLOW 2 /* allow to control sleep */ #define AR_SCR_BITS "\20\20SLE_SLP\21SLE_ALLOW" #define AR_INTPEND_IP 0x00000001 /* interrupt pending */ #define AR_INTPEND_BITS "\20\1IP" #define AR_SFR_SF 0x00000001 /* force sleep immediately */ #define AR_PCICFG_EEPROMSEL 0x00000001 /* EEPROM access enable */ #define AR_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable */ #define AR_PCICFG_LED_PEND 0x00000020 /* LED for assoc pending */ #define AR_PCICFG_LED_ACT 0x00000040 /* LED for assoc active */ #define AR_PCICFG_SL_INTEN 0x00000800 /* Enable sleep intr */ #define AR_PCICFG_LED_BCTL 0x00001000 /* LED blink for local act */ #define AR_PCICFG_SL_INPEN 0x00002800 /* sleep even intr pending */ #define AR_PCICFG_SPWR_DN 0x00010000 /* sleep indication */ #define AR_PCICFG_BITS \ "\20\1EEPROMSEL\3CLKRUNEN\5LED_PEND\6LED_ACT\13SL_INTEN"\ "\14LED_BCTL\20SPWR_DN" #define AR_GPIOCR_IN(n) (0<<((n)*2)) /* input-only */ #define AR_GPIOCR_OUT0(n) (1<<((n)*2)) /* output-only if GPIODO = 0 */ #define AR_GPIOCR_OUT1(n) (2<<((n)*2)) /* output-only if GPIODO = 1 */ #define AR_GPIOCR_OUT(n) (3<<((n)*2)) /* always output */ #define AR_GPIOCR_ALL(n) (3<<((n)*2)) /* all bits for pin */ #define AR_GPIOCR_INT_SEL(n) ((n)<<12) /* GPIO interrupt pin select */ #define AR_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ #define AR_GPIOCR_INT_SELL 0x00000000 /* Interrupt if pin is low */ #define AR_GPIOCR_INT_SELH 0x00010000 /* Interrupt if pin is high */ #define AR_SREV_CRETE 4 /* Crete 1st version */ #define AR_SREV_CRETE_MS 5 /* Crete FCS version */ #define AR_SREV_CRETE_23 8 /* Crete version 2.3 */ #define AR_EP_STA_RDERR 0x00000001 /* read error */ #define AR_EP_STA_RDCMPLT 0x00000002 /* read complete */ #define AR_EP_STA_WRERR 0x00000004 /* write error */ #define AR_EP_STA_WRCMPLT 0x00000008 /* write complete */ #define AR_EP_STA_BITS \ "\20\1RDERR\2RDCMPLT\3WRERR\4WRCMPLT" #define AR_STA_ID1_AP 0x00010000 /* Access Point Operation */ #define AR_STA_ID1_ADHOC 0x00020000 /* ad hoc Operation */ #define AR_STA_ID1_PWR_SV 0x00040000 /* power save report enable */ #define AR_STA_ID1_NO_KEYSRCH 0x00080000 /* key table search disable */ #define AR_STA_ID1_NO_PSPOLL 0x00100000 /* auto PS-POLL disable */ #define AR_STA_ID1_PCF 0x00200000 /* PCF observation enable */ #define AR_STA_ID1_DESC_ANTENNA 0x00400000 /* use antenna in TX desc */ #define AR_STA_ID1_DEFAULT_ANTENNA 0x00800000 /* toggle default antenna */ #define AR_STA_ID1_ACKCTS_6MB 0x01000000 /* use 6Mbps for ACK/CTS */ #define AR_STA_ID1_BITS \ "\20\20AP\21ADHOC\22PWR_SV\23NO_KEYSRCH\24NO_PSPOLL\25PCF"\ "\26DESC_ANTENNA\27DEFAULT_ANTENNA\30ACKCTS_6MB" #define AR_BSS_ID1_AID 0xffff0000 /* association ID */ #define AR_BSS_ID1_AID_S 16 #define AR_TIME_OUT_ACK 0x00001fff /* ACK timeout */ #define AR_TIME_OUT_ACK_S 0 #define AR_TIME_OUT_CTS 0x1fff0000 /* CTS timeout */ #define AR_TIME_OUT_CTS_S 16 #define AR_RSSI_THR_BM_THR 0x00000700 /* missed beacon threshold */ #define AR_RSSI_THR_BM_THR_S 8 #define AR_RETRY_LMT_SH_RETRY 0x0000000f /* short frame retry limit */ #define AR_RETRY_LMT_SH_RETRY_S 0 #define AR_RETRY_LMT_LG_RETRY 0x000000f0 /* long frame retry limit */ #define AR_RETRY_LMT_LG_RETRY_S 4 #define AR_RETRY_LMT_SSH_RETRY 0x00003f00 /* short station retry limit */ #define AR_RETRY_LMT_SSH_RETRY_S 8 #define AR_RETRY_LMT_SLG_RETRY 0x000fc000 /* long station retry limit */ #define AR_RETRY_LMT_SLG_RETRY_S 14 #define AR_RETRY_LMT_CW_MIN 0x3ff00000 /* minimum contention window */ #define AR_RETRY_LMT_CW_MIN_S 20 #define AR_USEC_1 0x0000007f /* number of clk in 1us */ #define AR_USEC_1_S 0 #define AR_USEC_32 0x00003f80 /* number of 32MHz clk in 1us */ #define AR_USEC_32_S 7 #define AR_USEC_TX_LATENCY 0x000fc000 /* transmit latency in us */ #define AR_USEC_TX_LATENCY_S 14 #define AR_USEC_RX_LATENCY 0x03f00000 /* receive latency in us */ #define AR_USEC_RX_LATENCY_S 20 #define AR_BEACON_PERIOD 0x0000ffff /* beacon period in TU/ms */ #define AR_BEACON_PERIOD_S 0 #define AR_BEACON_TIM 0x007f0000 /* byte offset */ #define AR_BEACON_TIM_S 16 #define AR_BEACON_EN 0x00800000 /* beacon transmission enable */ #define AR_BEACON_RESET_TSF 0x01000000 /* TSF reset oneshot */ #define AR_BEACON_BITS "\20\27ENABLE\30RESET_TSF" #define AR_IFS0_SIFS 0x000007ff /* SIFS in core clock cycles */ #define AR_IFS0_SIFS_S 0 #define AR_IFS0_DIFS 0x007ff800 /* DIFS in core clock cycles */ #define AR_IFS0_DIFS_S 11 #define AR_IFS1_PIFS 0x00000fff /* Programmable IFS */ #define AR_IFS1_PIFS_S 0 #define AR_IFS1_EIFS 0x03fff000 /* EIFS in core clock cycles */ #define AR_IFS1_EIFS_S 12 #define AR_IFS1_CS_EN 0x04000000 /* carrier sense enable */ #define AR_RX_FILTER_UNICAST 0x00000001 /* unicast frame enable */ #define AR_RX_FILTER_MULTICAST 0x00000002 /* multicast frame enable */ #define AR_RX_FILTER_BROADCAST 0x00000004 /* broadcast frame enable */ #define AR_RX_FILTER_CONTROL 0x00000008 /* control frame enable */ #define AR_RX_FILTER_BEACON 0x00000010 /* beacon frame enable */ #define AR_RX_FILTER_PROMISCUOUS 0x00000020 /* promiscuous receive enable */ #define AR_RX_FILTER_BITS \ "\20\1UCAST\2MCAST\3BCAST\4CONTROL\5BEACON\6PROMISC" #define AR_DIAG_SW_DIS_WEP_ACK 0x00000001 /* disable ACK if no key found*/ #define AR_DIAG_SW_DIS_ACK 0x00000002 /* disable ACK generation */ #define AR_DIAG_SW_DIS_CTS 0x00000004 /* disable CTS generation */ #define AR_DIAG_SW_DIS_ENC 0x00000008 /* encryption disable */ #define AR_DIAG_SW_DIS_DEC 0x00000010 /* decryption disable */ #define AR_DIAG_SW_DIS_TX 0x00000020 /* TX disable */ #define AR_DIAG_SW_DIS_RX 0x00000040 /* RX disable */ #define AR_DIAG_SW_LOOP_BACK 0x00000080 /* TX data loopback enable */ #define AR_DIAG_SW_CORR_FCS 0x00000100 /* corrupt FCS enable */ #define AR_DIAG_SW_CHAN_INFO 0x00000200 /* channel information enable */ #define AR_DIAG_SW_EN_SCRAM_SEED 0x00000400 /* use fixed scrambler seed */ #define AR_DIAG_SW_SCVRAM_SEED 0x0003f800 /* fixed scrambler seed */ #define AR_DIAG_SW_DIS_SEQ_INC 0x00040000 /* seq increment disable */ #define AR_DIAG_SW_FRAME_NV0 0x00080000 /* accept frame vers != 0 */ #define AR_DIAG_SW_BITS \ "\20\1DIS_WEP_ACK\2DIS_ACK\3DIS_CTS\4DIS_ENC\5DIS_DEC\6DIS_TX"\ "\7DIS_RX\10LOOP_BACK\11CORR_FCS\12CHAN_INFO\13EN_SCRAM_SEED"\ "\22DIS_SEQ_INC\24FRAME_NV0" #define AR_RETRY_CNT_SSH 0x0000003f /* current short retry count */ #define AR_RETRY_CNT_SLG 0x00000fc0 /* current long retry count */ #define AR_BACKOFF_CW 0x000003ff /* current contention window */ #define AR_BACKOFF_CNT 0x03ff0000 /* backoff count */ #define AR_KEYTABLE_KEY0(n) (AR_KEYTABLE(n) + 0) /* key bit 0-31 */ #define AR_KEYTABLE_KEY1(n) (AR_KEYTABLE(n) + 4) /* key bit 32-47 */ #define AR_KEYTABLE_KEY2(n) (AR_KEYTABLE(n) + 8) /* key bit 48-79 */ #define AR_KEYTABLE_KEY3(n) (AR_KEYTABLE(n) + 12) /* key bit 80-95 */ #define AR_KEYTABLE_KEY4(n) (AR_KEYTABLE(n) + 16) /* key bit 96-127 */ #define AR_KEYTABLE_TYPE(n) (AR_KEYTABLE(n) + 20) /* key type */ #define AR_KEYTABLE_TYPE_40 0x00000000 /* 40 bit key */ #define AR_KEYTABLE_TYPE_104 0x00000001 /* 104 bit key */ #define AR_KEYTABLE_TYPE_128 0x00000003 /* 128 bit key */ #define AR_KEYTABLE_MAC0(n) (AR_KEYTABLE(n) + 24) /* MAC address 1-32 */ #define AR_KEYTABLE_MAC1(n) (AR_KEYTABLE(n) + 28) /* MAC address 33-47 */ #define AR_KEYTABLE_VALID 0x00008000 /* key and MAC address valid */ #endif /* _DEV_ATH_AR5210REG_H */