Current Path : /sys/dev/iwi/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/dev/iwi/if_iwivar.h |
/* $FreeBSD: release/9.1.0/sys/dev/iwi/if_iwivar.h 213729 2010-10-12 16:52:13Z bschmidt $ */ /*- * Copyright (c) 2004, 2005 * Damien Bergamini <damien.bergamini@free.fr>. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ struct iwi_rx_radiotap_header { struct ieee80211_radiotap_header wr_ihdr; uint8_t wr_flags; uint8_t wr_rate; uint16_t wr_chan_freq; uint16_t wr_chan_flags; int8_t wr_antsignal; int8_t wr_antnoise; uint8_t wr_antenna; }; #define IWI_RX_RADIOTAP_PRESENT \ ((1 << IEEE80211_RADIOTAP_FLAGS) | \ (1 << IEEE80211_RADIOTAP_RATE) | \ (1 << IEEE80211_RADIOTAP_CHANNEL) | \ (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \ (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | \ (1 << IEEE80211_RADIOTAP_ANTENNA)) struct iwi_tx_radiotap_header { struct ieee80211_radiotap_header wt_ihdr; uint8_t wt_flags; uint16_t wt_chan_freq; uint16_t wt_chan_flags; }; #define IWI_TX_RADIOTAP_PRESENT \ ((1 << IEEE80211_RADIOTAP_FLAGS) | \ (1 << IEEE80211_RADIOTAP_CHANNEL)) struct iwi_cmd_ring { bus_dma_tag_t desc_dmat; bus_dmamap_t desc_map; bus_addr_t physaddr; struct iwi_cmd_desc *desc; int count; int queued; int cur; int next; }; struct iwi_tx_data { bus_dmamap_t map; struct mbuf *m; struct ieee80211_node *ni; }; struct iwi_tx_ring { bus_dma_tag_t desc_dmat; bus_dma_tag_t data_dmat; bus_dmamap_t desc_map; bus_addr_t physaddr; bus_addr_t csr_ridx; bus_addr_t csr_widx; struct iwi_tx_desc *desc; struct iwi_tx_data *data; int count; int queued; int cur; int next; }; struct iwi_rx_data { bus_dmamap_t map; bus_addr_t physaddr; uint32_t reg; struct mbuf *m; }; struct iwi_rx_ring { bus_dma_tag_t data_dmat; struct iwi_rx_data *data; int count; int cur; }; struct iwi_node { struct ieee80211_node in_node; int in_station; #define IWI_MAX_IBSSNODE 32 }; struct iwi_fw { const struct firmware *fp; /* image handle */ const char *data; /* firmware image data */ size_t size; /* firmware image size */ const char *name; /* associated image name */ }; struct iwi_vap { struct ieee80211vap iwi_vap; int (*iwi_newstate)(struct ieee80211vap *, enum ieee80211_state, int); }; #define IWI_VAP(vap) ((struct iwi_vap *)(vap)) struct iwi_softc { struct ifnet *sc_ifp; void (*sc_node_free)(struct ieee80211_node *); device_t sc_dev; struct mtx sc_mtx; uint8_t sc_mcast[IEEE80211_ADDR_LEN]; struct unrhdr *sc_unr; uint32_t flags; #define IWI_FLAG_FW_INITED (1 << 0) #define IWI_FLAG_BUSY (1 << 3) /* busy sending a command */ #define IWI_FLAG_ASSOCIATED (1 << 4) /* currently associated */ #define IWI_FLAG_CHANNEL_SCAN (1 << 5) uint32_t fw_state; #define IWI_FW_IDLE 0 #define IWI_FW_LOADING 1 #define IWI_FW_ASSOCIATING 2 #define IWI_FW_DISASSOCIATING 3 #define IWI_FW_SCANNING 4 struct iwi_cmd_ring cmdq; struct iwi_tx_ring txq[WME_NUM_AC]; struct iwi_rx_ring rxq; struct resource *irq; struct resource *mem; bus_space_tag_t sc_st; bus_space_handle_t sc_sh; void *sc_ih; int mem_rid; int irq_rid; /* * The card needs external firmware images to work, which is made of a * bootloader, microcode and firmware proper. In version 3.00 and * above, all pieces are contained in a single image, preceded by a * struct iwi_firmware_hdr indicating the size of the 3 pieces. * Old firmware < 3.0 has separate boot and ucode, so we need to * load all of them explicitly. * To avoid issues related to fragmentation, we keep the block of * dma-ble memory around until detach time, and reallocate it when * it becomes too small. fw_dma_size is the size currently allocated. */ int fw_dma_size; uint32_t fw_flags; /* allocation status */ #define IWI_FW_HAVE_DMAT 0x01 #define IWI_FW_HAVE_MAP 0x02 #define IWI_FW_HAVE_PHY 0x04 bus_dma_tag_t fw_dmat; bus_dmamap_t fw_map; bus_addr_t fw_physaddr; void *fw_virtaddr; enum ieee80211_opmode fw_mode; /* mode of current firmware */ struct iwi_fw fw_boot; /* boot firmware */ struct iwi_fw fw_uc; /* microcode */ struct iwi_fw fw_fw; /* operating mode support */ int curchan; /* current h/w channel # */ int antenna; int bluetooth; struct iwi_associate assoc; struct iwi_wme_params wme[3]; u_int sc_scangen; struct task sc_radiontask; /* radio on processing */ struct task sc_radiofftask; /* radio off processing */ struct task sc_restarttask; /* restart adapter processing */ struct task sc_disassoctask; struct task sc_wmetask; /* set wme parameters */ struct task sc_monitortask; unsigned int sc_softled : 1, /* enable LED gpio status */ sc_ledstate: 1, /* LED on/off state */ sc_blinking: 1; /* LED blink operation active */ u_int sc_nictype; /* NIC type from EEPROM */ u_int sc_ledpin; /* mask for activity LED */ u_int sc_ledidle; /* idle polling interval */ int sc_ledevent; /* time of last LED event */ u_int8_t sc_rxrate; /* current rx rate for LED */ u_int8_t sc_rxrix; u_int8_t sc_txrate; /* current tx rate for LED */ u_int8_t sc_txrix; u_int16_t sc_ledoff; /* off time for current blink */ struct callout sc_ledtimer; /* led off timer */ struct callout sc_wdtimer; /* watchdog timer */ struct callout sc_rftimer; /* rfkill timer */ int sc_tx_timer; int sc_state_timer; /* firmware state timer */ int sc_busy_timer; /* firmware cmd timer */ struct iwi_rx_radiotap_header sc_rxtap; struct iwi_tx_radiotap_header sc_txtap; }; #define IWI_STATE_BEGIN(_sc, _state) do { \ KASSERT(_sc->fw_state == IWI_FW_IDLE, \ ("iwi firmware not idle, state %s", iwi_fw_states[_sc->fw_state]));\ _sc->fw_state = _state; \ _sc->sc_state_timer = 5; \ DPRINTF(("enter %s state\n", iwi_fw_states[_state])); \ } while (0) #define IWI_STATE_END(_sc, _state) do { \ if (_sc->fw_state == _state) \ DPRINTF(("exit %s state\n", iwi_fw_states[_state])); \ else \ DPRINTF(("expected %s state, got %s\n", \ iwi_fw_states[_state], iwi_fw_states[_sc->fw_state])); \ _sc->fw_state = IWI_FW_IDLE; \ wakeup(_sc); \ _sc->sc_state_timer = 0; \ } while (0) /* * NB.: This models the only instance of async locking in iwi_init_locked * and must be kept in sync. */ #define IWI_LOCK_INIT(sc) \ mtx_init(&(sc)->sc_mtx, device_get_nameunit((sc)->sc_dev), \ MTX_NETWORK_LOCK, MTX_DEF) #define IWI_LOCK_DESTROY(sc) mtx_destroy(&(sc)->sc_mtx) #define IWI_LOCK_DECL int __waslocked = 0 #define IWI_LOCK_ASSERT(sc) mtx_assert(&(sc)->sc_mtx, MA_OWNED) #define IWI_LOCK(sc) do { \ if (!(__waslocked = mtx_owned(&(sc)->sc_mtx))) \ mtx_lock(&(sc)->sc_mtx); \ } while (0) #define IWI_UNLOCK(sc) do { \ if (!__waslocked) \ mtx_unlock(&(sc)->sc_mtx); \ } while (0)