| Current Path : /sys/dev/mii/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/dev/mii/e1000phy.c |
/*-
* Principal Author: Parag Patel
* Copyright (c) 2001
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Additional Copyright (c) 2001 by Traakan Software under same licence.
* Secondary Author: Matthew Jacob
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/mii/e1000phy.c 229093 2011-12-31 14:12:12Z hselasky $");
/*
* driver for the Marvell 88E1000 series external 1000/100/10-BT PHY.
*/
/*
* Support added for the Marvell 88E1011 (Alaska) 1000/100/10baseTX and
* 1000baseSX PHY.
* Nathan Binkert <nate@openbsd.org>
* Jung-uk Kim <jkim@niksun.com>
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/e1000phyreg.h>
#include "miibus_if.h"
static int e1000phy_probe(device_t);
static int e1000phy_attach(device_t);
static device_method_t e1000phy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, e1000phy_probe),
DEVMETHOD(device_attach, e1000phy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static devclass_t e1000phy_devclass;
static driver_t e1000phy_driver = {
"e1000phy",
e1000phy_methods,
sizeof(struct mii_softc)
};
DRIVER_MODULE(e1000phy, miibus, e1000phy_driver, e1000phy_devclass, 0, 0);
static int e1000phy_service(struct mii_softc *, struct mii_data *, int);
static void e1000phy_status(struct mii_softc *);
static void e1000phy_reset(struct mii_softc *);
static int e1000phy_mii_phy_auto(struct mii_softc *, int);
static const struct mii_phydesc e1000phys[] = {
MII_PHY_DESC(MARVELL, E1000),
MII_PHY_DESC(MARVELL, E1011),
MII_PHY_DESC(MARVELL, E1000_3),
MII_PHY_DESC(MARVELL, E1000_5),
MII_PHY_DESC(MARVELL, E1111),
MII_PHY_DESC(xxMARVELL, E1000),
MII_PHY_DESC(xxMARVELL, E1011),
MII_PHY_DESC(xxMARVELL, E1000_3),
MII_PHY_DESC(xxMARVELL, E1000S),
MII_PHY_DESC(xxMARVELL, E1000_5),
MII_PHY_DESC(xxMARVELL, E1101),
MII_PHY_DESC(xxMARVELL, E3082),
MII_PHY_DESC(xxMARVELL, E1112),
MII_PHY_DESC(xxMARVELL, E1149),
MII_PHY_DESC(xxMARVELL, E1111),
MII_PHY_DESC(xxMARVELL, E1116),
MII_PHY_DESC(xxMARVELL, E1116R),
MII_PHY_DESC(xxMARVELL, E1118),
MII_PHY_DESC(xxMARVELL, E1149R),
MII_PHY_DESC(xxMARVELL, E3016),
MII_PHY_DESC(xxMARVELL, PHYG65G),
MII_PHY_END
};
static const struct mii_phy_funcs e1000phy_funcs = {
e1000phy_service,
e1000phy_status,
e1000phy_reset
};
static int
e1000phy_probe(device_t dev)
{
return (mii_phy_dev_probe(dev, e1000phys, BUS_PROBE_DEFAULT));
}
static int
e1000phy_attach(device_t dev)
{
struct mii_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &e1000phy_funcs, 0);
ifp = sc->mii_pdata->mii_ifp;
if (strcmp(ifp->if_dname, "msk") == 0 &&
(sc->mii_flags & MIIF_MACPRIV0) != 0)
sc->mii_flags |= MIIF_PHYPRIV0;
switch (sc->mii_mpd_model) {
case MII_MODEL_xxMARVELL_E1011:
case MII_MODEL_xxMARVELL_E1112:
if (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK)
sc->mii_flags |= MIIF_HAVEFIBER;
break;
case MII_MODEL_xxMARVELL_E1149:
case MII_MODEL_xxMARVELL_E1149R:
/*
* Some 88E1149 PHY's page select is initialized to
* point to other bank instead of copper/fiber bank
* which in turn resulted in wrong registers were
* accessed during PHY operation. It is believed that
* page 0 should be used for copper PHY so reinitialize
* E1000_EADR to select default copper PHY. If parent
* device know the type of PHY(either copper or fiber),
* that information should be used to select default
* type of PHY.
*/
PHY_WRITE(sc, E1000_EADR, 0);
break;
}
PHY_RESET(sc);
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & sc->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
device_printf(dev, " ");
mii_phy_add_media(sc);
printf("\n");
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static void
e1000phy_reset(struct mii_softc *sc)
{
uint16_t reg, page;
reg = PHY_READ(sc, E1000_SCR);
if ((sc->mii_flags & MIIF_HAVEFIBER) != 0) {
reg &= ~E1000_SCR_AUTO_X_MODE;
PHY_WRITE(sc, E1000_SCR, reg);
if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1112) {
/* Select 1000BASE-X only mode. */
page = PHY_READ(sc, E1000_EADR);
PHY_WRITE(sc, E1000_EADR, 2);
reg = PHY_READ(sc, E1000_SCR);
reg &= ~E1000_SCR_MODE_MASK;
reg |= E1000_SCR_MODE_1000BX;
PHY_WRITE(sc, E1000_SCR, reg);
if ((sc->mii_flags & MIIF_PHYPRIV0) != 0) {
/* Set SIGDET polarity low for SFP module. */
PHY_WRITE(sc, E1000_EADR, 1);
reg = PHY_READ(sc, E1000_SCR);
reg |= E1000_SCR_FIB_SIGDET_POLARITY;
PHY_WRITE(sc, E1000_SCR, reg);
}
PHY_WRITE(sc, E1000_EADR, page);
}
} else {
switch (sc->mii_mpd_model) {
case MII_MODEL_xxMARVELL_E1111:
case MII_MODEL_xxMARVELL_E1112:
case MII_MODEL_xxMARVELL_E1116:
case MII_MODEL_xxMARVELL_E1118:
case MII_MODEL_xxMARVELL_E1149:
case MII_MODEL_xxMARVELL_E1149R:
case MII_MODEL_xxMARVELL_PHYG65G:
/* Disable energy detect mode. */
reg &= ~E1000_SCR_EN_DETECT_MASK;
reg |= E1000_SCR_AUTO_X_MODE;
if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1116)
reg &= ~E1000_SCR_POWER_DOWN;
reg |= E1000_SCR_ASSERT_CRS_ON_TX;
break;
case MII_MODEL_xxMARVELL_E3082:
reg |= (E1000_SCR_AUTO_X_MODE >> 1);
reg |= E1000_SCR_ASSERT_CRS_ON_TX;
break;
case MII_MODEL_xxMARVELL_E3016:
reg |= E1000_SCR_AUTO_MDIX;
reg &= ~(E1000_SCR_EN_DETECT |
E1000_SCR_SCRAMBLER_DISABLE);
reg |= E1000_SCR_LPNP;
/* XXX Enable class A driver for Yukon FE+ A0. */
PHY_WRITE(sc, 0x1C, PHY_READ(sc, 0x1C) | 0x0001);
break;
default:
reg &= ~E1000_SCR_AUTO_X_MODE;
reg |= E1000_SCR_ASSERT_CRS_ON_TX;
break;
}
if (sc->mii_mpd_model != MII_MODEL_xxMARVELL_E3016) {
/* Auto correction for reversed cable polarity. */
reg &= ~E1000_SCR_POLARITY_REVERSAL;
}
PHY_WRITE(sc, E1000_SCR, reg);
if (sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1116 ||
sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1149 ||
sc->mii_mpd_model == MII_MODEL_xxMARVELL_E1149R) {
PHY_WRITE(sc, E1000_EADR, 2);
reg = PHY_READ(sc, E1000_SCR);
reg |= E1000_SCR_RGMII_POWER_UP;
PHY_WRITE(sc, E1000_SCR, reg);
PHY_WRITE(sc, E1000_EADR, 0);
}
}
switch (sc->mii_mpd_model) {
case MII_MODEL_xxMARVELL_E3082:
case MII_MODEL_xxMARVELL_E1112:
case MII_MODEL_xxMARVELL_E1118:
break;
case MII_MODEL_xxMARVELL_E1116:
page = PHY_READ(sc, E1000_EADR);
/* Select page 3, LED control register. */
PHY_WRITE(sc, E1000_EADR, 3);
PHY_WRITE(sc, E1000_SCR,
E1000_SCR_LED_LOS(1) | /* Link/Act */
E1000_SCR_LED_INIT(8) | /* 10Mbps */
E1000_SCR_LED_STAT1(7) | /* 100Mbps */
E1000_SCR_LED_STAT0(7)); /* 1000Mbps */
/* Set blink rate. */
PHY_WRITE(sc, E1000_IER, E1000_PULSE_DUR(E1000_PULSE_170MS) |
E1000_BLINK_RATE(E1000_BLINK_84MS));
PHY_WRITE(sc, E1000_EADR, page);
break;
case MII_MODEL_xxMARVELL_E3016:
/* LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED. */
PHY_WRITE(sc, 0x16, 0x0B << 8 | 0x05 << 4 | 0x04);
/* Integrated register calibration workaround. */
PHY_WRITE(sc, 0x1D, 17);
PHY_WRITE(sc, 0x1E, 0x3F60);
break;
default:
/* Force TX_CLK to 25MHz clock. */
reg = PHY_READ(sc, E1000_ESCR);
reg |= E1000_ESCR_TX_CLK_25;
PHY_WRITE(sc, E1000_ESCR, reg);
break;
}
/* Reset the PHY so all changes take effect. */
reg = PHY_READ(sc, E1000_CR);
reg |= E1000_CR_RESET;
PHY_WRITE(sc, E1000_CR, reg);
}
static int
e1000phy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
uint16_t speed, gig;
int reg;
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO) {
e1000phy_mii_phy_auto(sc, ife->ifm_media);
break;
}
speed = 0;
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_1000_T:
if ((sc->mii_extcapabilities &
(EXTSR_1000TFDX | EXTSR_1000THDX)) == 0)
return (EINVAL);
speed = E1000_CR_SPEED_1000;
break;
case IFM_1000_SX:
if ((sc->mii_extcapabilities &
(EXTSR_1000XFDX | EXTSR_1000XHDX)) == 0)
return (EINVAL);
speed = E1000_CR_SPEED_1000;
break;
case IFM_100_TX:
speed = E1000_CR_SPEED_100;
break;
case IFM_10_T:
speed = E1000_CR_SPEED_10;
break;
case IFM_NONE:
reg = PHY_READ(sc, E1000_CR);
PHY_WRITE(sc, E1000_CR,
reg | E1000_CR_ISOLATE | E1000_CR_POWER_DOWN);
goto done;
default:
return (EINVAL);
}
if ((ife->ifm_media & IFM_FDX) != 0) {
speed |= E1000_CR_FULL_DUPLEX;
gig = E1000_1GCR_1000T_FD;
} else
gig = E1000_1GCR_1000T;
reg = PHY_READ(sc, E1000_CR);
reg &= ~E1000_CR_AUTO_NEG_ENABLE;
PHY_WRITE(sc, E1000_CR, reg | E1000_CR_RESET);
if (IFM_SUBTYPE(ife->ifm_media) == IFM_1000_T) {
gig |= E1000_1GCR_MS_ENABLE;
if ((ife->ifm_media & IFM_ETH_MASTER) != 0)
gig |= E1000_1GCR_MS_VALUE;
} else if ((sc->mii_extcapabilities &
(EXTSR_1000TFDX | EXTSR_1000THDX)) != 0)
gig = 0;
PHY_WRITE(sc, E1000_1GCR, gig);
PHY_WRITE(sc, E1000_AR, E1000_AR_SELECTOR_FIELD);
PHY_WRITE(sc, E1000_CR, speed | E1000_CR_RESET);
done:
break;
case MII_TICK:
/*
* Is the interface even up?
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return (0);
/*
* Only used for autonegotiation.
*/
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
sc->mii_ticks = 0;
break;
}
/*
* check for link.
* Read the status register twice; BMSR_LINK is latch-low.
*/
reg = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
if (reg & BMSR_LINK) {
sc->mii_ticks = 0;
break;
}
/* Announce link loss right after it happens. */
if (sc->mii_ticks++ == 0)
break;
if (sc->mii_ticks <= sc->mii_anegticks)
break;
sc->mii_ticks = 0;
PHY_RESET(sc);
e1000phy_mii_phy_auto(sc, ife->ifm_media);
break;
}
/* Update the media status. */
PHY_STATUS(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}
static void
e1000phy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
int bmcr, bmsr, ssr;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
bmsr = PHY_READ(sc, E1000_SR) | PHY_READ(sc, E1000_SR);
bmcr = PHY_READ(sc, E1000_CR);
ssr = PHY_READ(sc, E1000_SSR);
if (bmsr & E1000_SR_LINK_STATUS)
mii->mii_media_status |= IFM_ACTIVE;
if (bmcr & E1000_CR_LOOPBACK)
mii->mii_media_active |= IFM_LOOP;
if ((bmcr & E1000_CR_AUTO_NEG_ENABLE) != 0 &&
(ssr & E1000_SSR_SPD_DPLX_RESOLVED) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
switch (ssr & E1000_SSR_SPEED) {
case E1000_SSR_1000MBS:
mii->mii_media_active |= IFM_1000_T;
break;
case E1000_SSR_100MBS:
mii->mii_media_active |= IFM_100_TX;
break;
case E1000_SSR_10MBS:
mii->mii_media_active |= IFM_10_T;
break;
default:
mii->mii_media_active |= IFM_NONE;
return;
}
} else {
/*
* Some fiber PHY(88E1112) does not seem to set resolved
* speed so always assume we've got IFM_1000_SX.
*/
mii->mii_media_active |= IFM_1000_SX;
}
if (ssr & E1000_SSR_DUPLEX) {
mii->mii_media_active |= IFM_FDX;
if ((sc->mii_flags & MIIF_HAVEFIBER) == 0)
mii->mii_media_active |= mii_phy_flowstatus(sc);
} else
mii->mii_media_active |= IFM_HDX;
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) {
if (((PHY_READ(sc, E1000_1GSR) | PHY_READ(sc, E1000_1GSR)) &
E1000_1GSR_MS_CONFIG_RES) != 0)
mii->mii_media_active |= IFM_ETH_MASTER;
}
}
static int
e1000phy_mii_phy_auto(struct mii_softc *sc, int media)
{
uint16_t reg;
if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
reg = PHY_READ(sc, E1000_AR);
reg &= ~(E1000_AR_PAUSE | E1000_AR_ASM_DIR);
reg |= E1000_AR_10T | E1000_AR_10T_FD |
E1000_AR_100TX | E1000_AR_100TX_FD;
if ((media & IFM_FLOW) != 0 ||
(sc->mii_flags & MIIF_FORCEPAUSE) != 0)
reg |= E1000_AR_PAUSE | E1000_AR_ASM_DIR;
PHY_WRITE(sc, E1000_AR, reg | E1000_AR_SELECTOR_FIELD);
} else
PHY_WRITE(sc, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X);
if ((sc->mii_extcapabilities & (EXTSR_1000TFDX | EXTSR_1000THDX)) != 0)
PHY_WRITE(sc, E1000_1GCR,
E1000_1GCR_1000T_FD | E1000_1GCR_1000T);
PHY_WRITE(sc, E1000_CR,
E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG);
return (EJUSTRETURN);
}