| Current Path : /sys/dev/mps/mpi/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/dev/mps/mpi/mpi2_cnfg.h |
/*-
* Copyright (c) 2011, 2012 LSI Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* LSI MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD: release/9.1.0/sys/dev/mps/mpi/mpi2_cnfg.h 237876 2012-07-01 05:22:45Z ken $
*/
/*
* Copyright (c) 2000-2012 LSI Corporation.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
* mpi2_cnfg.h Version: 02.00.17
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
* Added Manufacturing Page 11.
* Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
* define.
* 06-26-07 02.00.02 Adding generic structure for product-specific
* Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
* Rework of BIOS Page 2 configuration page.
* Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
* forms.
* Added configuration pages IOC Page 8 and Driver
* Persistent Mapping Page 0.
* 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
* RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
* RAID Physical Disk Pages 0 and 1, RAID Configuration
* Page 0).
* Added new value for AccessStatus field of SAS Device
* Page 0 (_SATA_NEEDS_INITIALIZATION).
* 10-31-07 02.00.04 Added missing SEPDevHandle field to
* MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
* 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
* NVDATA.
* Modified IOC Page 7 to use masks and added field for
* SASBroadcastPrimitiveMasks.
* Added MPI2_CONFIG_PAGE_BIOS_4.
* Added MPI2_CONFIG_PAGE_LOG_0.
* 02-29-08 02.00.06 Modified various names to make them 32-character unique.
* Added SAS Device IDs.
* Updated Integrated RAID configuration pages including
* Manufacturing Page 4, IOC Page 6, and RAID Configuration
* Page 0.
* 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
* Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
* Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
* Added missing MaxNumRoutedSasAddresses field to
* MPI2_CONFIG_PAGE_EXPANDER_0.
* Added SAS Port Page 0.
* Modified structure layout for
* MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
* 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
* MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
* 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
* to 0x000000FF.
* Added two new values for the Physical Disk Coercion Size
* bits in the Flags field of Manufacturing Page 4.
* Added product-specific Manufacturing pages 16 to 31.
* Modified Flags bits for controlling write cache on SATA
* drives in IO Unit Page 1.
* Added new bit to AdditionalControlFlags of SAS IO Unit
* Page 1 to control Invalid Topology Correction.
* Added additional defines for RAID Volume Page 0
* VolumeStatusFlags field.
* Modified meaning of RAID Volume Page 0 VolumeSettings
* define for auto-configure of hot-swap drives.
* Added SupportedPhysDisks field to RAID Volume Page 1 and
* added related defines.
* Added PhysDiskAttributes field (and related defines) to
* RAID Physical Disk Page 0.
* Added MPI2_SAS_PHYINFO_PHY_VACANT define.
* Added three new DiscoveryStatus bits for SAS IO Unit
* Page 0 and SAS Expander Page 0.
* Removed multiplexing information from SAS IO Unit pages.
* Added BootDeviceWaitTime field to SAS IO Unit Page 4.
* Removed Zone Address Resolved bit from PhyInfo and from
* Expander Page 0 Flags field.
* Added two new AccessStatus values to SAS Device Page 0
* for indicating routing problems. Added 3 reserved words
* to this page.
* 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
* Inserted missing reserved field into structure for IOC
* Page 6.
* Added more pending task bits to RAID Volume Page 0
* VolumeStatusFlags defines.
* Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
* Added a new DiscoveryStatus bit for SAS IO Unit Page 0
* and SAS Expander Page 0 to flag a downstream initiator
* when in simplified routing mode.
* Removed SATA Init Failure defines for DiscoveryStatus
* fields of SAS IO Unit Page 0 and SAS Expander Page 0.
* Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
* Added PortGroups, DmaGroup, and ControlGroup fields to
* SAS Device Page 0.
* 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
* Unit Page 6.
* Added expander reduced functionality data to SAS
* Expander Page 0.
* Added SAS PHY Page 2 and SAS PHY Page 3.
* 07-30-09 02.00.12 Added IO Unit Page 7.
* Added new device ids.
* Added SAS IO Unit Page 5.
* Added partial and slumber power management capable flags
* to SAS Device Page 0 Flags field.
* Added PhyInfo defines for power condition.
* Added Ethernet configuration pages.
* 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
* Added SAS PHY Page 4 structure and defines.
* 02-10-10 02.00.14 Modified the comments for the configuration page
* structures that contain an array of data. The host
* should use the "count" field in the page data (e.g. the
* NumPhys field) to determine the number of valid elements
* in the array.
* Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
* Added PowerManagementCapabilities to IO Unit Page 7.
* Added PortWidthModGroup field to
* MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
* Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
* Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
* Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
* 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
* define.
* Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
* Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
* 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
* defines.
* 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
* MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
* the Pinout field.
* Added BoardTemperature and BoardTemperatureUnits fields
* to MPI2_CONFIG_PAGE_IO_UNIT_7.
* Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
* and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_CNFG_H
#define MPI2_CNFG_H
/*****************************************************************************
* Configuration Page Header and defines
*****************************************************************************/
/* Config Page Header */
typedef struct _MPI2_CONFIG_PAGE_HEADER
{
U8 PageVersion; /* 0x00 */
U8 PageLength; /* 0x01 */
U8 PageNumber; /* 0x02 */
U8 PageType; /* 0x03 */
} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER,
Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t;
typedef union _MPI2_CONFIG_PAGE_HEADER_UNION
{
MPI2_CONFIG_PAGE_HEADER Struct;
U8 Bytes[4];
U16 Word16[2];
U32 Word32;
} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion;
/* Extended Config Page Header */
typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER
{
U8 PageVersion; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 PageNumber; /* 0x02 */
U8 PageType; /* 0x03 */
U16 ExtPageLength; /* 0x04 */
U8 ExtPageType; /* 0x06 */
U8 Reserved2; /* 0x07 */
} MPI2_CONFIG_EXTENDED_PAGE_HEADER,
MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t;
typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION
{
MPI2_CONFIG_PAGE_HEADER Struct;
MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
U8 Bytes[8];
U16 Word16[4];
U32 Word32[2];
} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion;
/* PageType field values */
#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00)
#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10)
#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20)
#define MPI2_CONFIG_PAGEATTR_MASK (0xF0)
#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00)
#define MPI2_CONFIG_PAGETYPE_IOC (0x01)
#define MPI2_CONFIG_PAGETYPE_BIOS (0x02)
#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09)
#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F)
#define MPI2_CONFIG_PAGETYPE_MASK (0x0F)
#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF)
/* ExtPageType field values */
#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14)
#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15)
#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
/*****************************************************************************
* PageAddress defines
*****************************************************************************/
/* RAID Volume PageAddress format */
#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000)
#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000)
#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF)
/* RAID Physical Disk PageAddress format */
#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000)
#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000)
#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000)
#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000)
#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF)
/* SAS Expander PageAddress format */
#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000)
#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000)
#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000)
#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF)
#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000)
#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
/* SAS Device PageAddress format */
#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000)
#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
/* SAS PHY PageAddress format */
#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000)
#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000)
#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF)
#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF)
/* SAS Port PageAddress format */
#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000)
#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF)
/* SAS Enclosure PageAddress format */
#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000)
#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
/* RAID Configuration PageAddress format */
#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000)
#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000)
#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000)
#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF)
/* Driver Persistent Mapping PageAddress format */
#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000)
#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000)
#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000)
#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16)
#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
/* Ethernet PageAddress format */
#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
/****************************************************************************
* Configuration messages
****************************************************************************/
/* Configuration Request Message */
typedef struct _MPI2_CONFIG_REQUEST
{
U8 Action; /* 0x00 */
U8 SGLFlags; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 ExtPageLength; /* 0x04 */
U8 ExtPageType; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
U32 Reserved2; /* 0x0C */
U32 Reserved3; /* 0x10 */
MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */
U32 PageAddress; /* 0x18 */
MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */
} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST,
Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t;
/* values for the Action field */
#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00)
#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03)
#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07)
/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
/* Config Reply Message */
typedef struct _MPI2_CONFIG_REPLY
{
U8 Action; /* 0x00 */
U8 SGLFlags; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 ExtPageLength; /* 0x04 */
U8 ExtPageType; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
U16 Reserved2; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */
} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY,
Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t;
/*****************************************************************************
*
* C o n f i g u r a t i o n P a g e s
*
*****************************************************************************/
/****************************************************************************
* Manufacturing Config pages
****************************************************************************/
#define MPI2_MFGPAGE_VENDORID_LSI (0x1000)
/* SAS */
#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070)
#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072)
#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074)
#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076)
#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E)
#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
/* Manufacturing Page 0 */
typedef struct _MPI2_CONFIG_PAGE_MAN_0
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U8 ChipName[16]; /* 0x04 */
U8 ChipRevision[8]; /* 0x14 */
U8 BoardName[16]; /* 0x1C */
U8 BoardAssembly[16]; /* 0x2C */
U8 BoardTracerNumber[16]; /* 0x3C */
} MPI2_CONFIG_PAGE_MAN_0,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0,
Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t;
#define MPI2_MANUFACTURING0_PAGEVERSION (0x00)
/* Manufacturing Page 1 */
typedef struct _MPI2_CONFIG_PAGE_MAN_1
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U8 VPD[256]; /* 0x04 */
} MPI2_CONFIG_PAGE_MAN_1,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1,
Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t;
#define MPI2_MANUFACTURING1_PAGEVERSION (0x00)
typedef struct _MPI2_CHIP_REVISION_ID
{
U16 DeviceID; /* 0x00 */
U8 PCIRevisionID; /* 0x02 */
U8 Reserved; /* 0x03 */
} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID,
Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t;
/* Manufacturing Page 2 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check Header.PageLength at runtime.
*/
#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_MAN_2
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */
U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */
} MPI2_CONFIG_PAGE_MAN_2,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2,
Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t;
#define MPI2_MANUFACTURING2_PAGEVERSION (0x00)
/* Manufacturing Page 3 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check Header.PageLength at runtime.
*/
#ifndef MPI2_MAN_PAGE_3_INFO_WORDS
#define MPI2_MAN_PAGE_3_INFO_WORDS (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_MAN_3
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */
U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */
} MPI2_CONFIG_PAGE_MAN_3,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3,
Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t;
#define MPI2_MANUFACTURING3_PAGEVERSION (0x00)
/* Manufacturing Page 4 */
typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS
{
U8 PowerSaveFlags; /* 0x00 */
U8 InternalOperationsSleepTime; /* 0x01 */
U8 InternalOperationsRunTime; /* 0x02 */
U8 HostIdleTime; /* 0x03 */
} MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t;
/* defines for the PowerSaveFlags field */
#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03)
#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00)
#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01)
#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02)
typedef struct _MPI2_CONFIG_PAGE_MAN_4
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x04 */
U32 Flags; /* 0x08 */
U8 InquirySize; /* 0x0C */
U8 Reserved2; /* 0x0D */
U16 Reserved3; /* 0x0E */
U8 InquiryData[56]; /* 0x10 */
U32 RAID0VolumeSettings; /* 0x48 */
U32 RAID1EVolumeSettings; /* 0x4C */
U32 RAID1VolumeSettings; /* 0x50 */
U32 RAID10VolumeSettings; /* 0x54 */
U32 Reserved4; /* 0x58 */
U32 Reserved5; /* 0x5C */
MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */
U8 MaxOCEDisks; /* 0x64 */
U8 ResyncRate; /* 0x65 */
U16 DataScrubDuration; /* 0x66 */
U8 MaxHotSpares; /* 0x68 */
U8 MaxPhysDisksPerVol; /* 0x69 */
U8 MaxPhysDisks; /* 0x6A */
U8 MaxVolumes; /* 0x6B */
} MPI2_CONFIG_PAGE_MAN_4,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4,
Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t;
#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A)
/* Manufacturing Page 4 Flags field */
#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000)
#define MPI2_MANPAGE4_METADATA_512MB (0x00000000)
#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000)
#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000)
#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000)
#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00)
#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000)
#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400)
#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800)
#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00)
#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300)
#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000)
#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100)
#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200)
#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080)
#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040)
#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020)
#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010)
#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008)
#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004)
#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002)
#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001)
/* Manufacturing Page 5 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
#endif
typedef struct _MPI2_MANUFACTURING5_ENTRY
{
U64 WWID; /* 0x00 */
U64 DeviceName; /* 0x08 */
} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY,
Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t;
typedef struct _MPI2_CONFIG_PAGE_MAN_5
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U8 NumPhys; /* 0x04 */
U8 Reserved1; /* 0x05 */
U16 Reserved2; /* 0x06 */
U32 Reserved3; /* 0x08 */
U32 Reserved4; /* 0x0C */
MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */
} MPI2_CONFIG_PAGE_MAN_5,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5,
Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t;
#define MPI2_MANUFACTURING5_PAGEVERSION (0x03)
/* Manufacturing Page 6 */
typedef struct _MPI2_CONFIG_PAGE_MAN_6
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 ProductSpecificInfo;/* 0x04 */
} MPI2_CONFIG_PAGE_MAN_6,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6,
Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t;
#define MPI2_MANUFACTURING6_PAGEVERSION (0x00)
/* Manufacturing Page 7 */
typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO
{
U32 Pinout; /* 0x00 */
U8 Connector[16]; /* 0x04 */
U8 Location; /* 0x14 */
U8 ReceptacleID; /* 0x15 */
U16 Slot; /* 0x16 */
U32 Reserved2; /* 0x18 */
} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t;
/* defines for the Pinout field */
#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00)
#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8)
#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF)
#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00)
#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01)
#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02)
#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03)
#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04)
#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05)
#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06)
#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07)
#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08)
#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09)
#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A)
#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
/* defines for the Location field */
#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02)
#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04)
#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08)
#define MPI2_MANPAGE7_LOCATION_AUTO (0x10)
#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_MAN_7
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x04 */
U32 Reserved2; /* 0x08 */
U32 Flags; /* 0x0C */
U8 EnclosureName[16]; /* 0x10 */
U8 NumPhys; /* 0x20 */
U8 Reserved3; /* 0x21 */
U16 Reserved4; /* 0x22 */
MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */
} MPI2_CONFIG_PAGE_MAN_7,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7,
Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t;
#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
/* defines for the Flags field */
#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
/*
* Generic structure to use for product-specific manufacturing pages
* (currently Manufacturing Page 8 through Manufacturing Page 31).
*/
typedef struct _MPI2_CONFIG_PAGE_MAN_PS
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 ProductSpecificInfo;/* 0x04 */
} MPI2_CONFIG_PAGE_MAN_PS,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS,
Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t;
#define MPI2_MANUFACTURING8_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING9_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING10_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING11_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING12_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING13_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING14_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING15_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING16_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING17_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING18_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING19_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING20_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING21_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING22_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING23_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING24_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING25_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING26_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING27_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING28_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING29_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING30_PAGEVERSION (0x00)
#define MPI2_MANUFACTURING31_PAGEVERSION (0x00)
/****************************************************************************
* IO Unit Config Pages
****************************************************************************/
/* IO Unit Page 0 */
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U64 UniqueValue; /* 0x04 */
MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */
MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */
} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t;
#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02)
/* IO Unit Page 1 */
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 Flags; /* 0x04 */
} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t;
#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
/* IO Unit Page 1 Flags defines */
#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9)
#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400)
#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040)
#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
/* IO Unit Page 3 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for GPIOCount at runtime.
*/
#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U8 GPIOCount; /* 0x04 */
U8 Reserved1; /* 0x05 */
U16 Reserved2; /* 0x06 */
U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */
} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t;
#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01)
/* defines for IO Unit Page 3 GPIOVal field */
#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC)
#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000)
#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
/* IO Unit Page 5 */
/*
* Upper layer code (drivers, utilities, etc.) should leave this define set to
* one and check the value returned for NumDmaEngines at runtime.
*/
#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */
U64 RaidAcceleratorBufferSize; /* 0x0C */
U64 RaidAcceleratorControlBaseAddress; /* 0x14 */
U8 RAControlSize; /* 0x1C */
U8 NumDmaEngines; /* 0x1D */
U8 RAMinControlSize; /* 0x1E */
U8 RAMaxControlSize; /* 0x1F */
U32 Reserved1; /* 0x20 */
U32 Reserved2; /* 0x24 */
U32 Reserved3; /* 0x28 */
U32 DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */
} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t;
#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
/* defines for IO Unit Page 5 DmaEngineCapabilities field */
#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00)
#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
/* IO Unit Page 6 */
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U16 Flags; /* 0x04 */
U8 RAHostControlSize; /* 0x06 */
U8 Reserved0; /* 0x07 */
U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */
U32 Reserved1; /* 0x10 */
U32 Reserved2; /* 0x14 */
U32 Reserved3; /* 0x18 */
} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t;
#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
/* defines for IO Unit Page 6 Flags field */
#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
/* IO Unit Page 7 */
typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U16 Reserved1; /* 0x04 */
U8 PCIeWidth; /* 0x06 */
U8 PCIeSpeed; /* 0x07 */
U32 ProcessorState; /* 0x08 */
U32 PowerManagementCapabilities; /* 0x0C */
U16 IOCTemperature; /* 0x10 */
U8 IOCTemperatureUnits; /* 0x12 */
U8 IOCSpeed; /* 0x13 */
U16 BoardTemperature; /* 0x14 */
U8 BoardTemperatureUnits; /* 0x16 */
U8 Reserved3; /* 0x17 */
} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
#define MPI2_IOUNITPAGE7_PAGEVERSION (0x02)
/* defines for IO Unit Page 7 PCIeWidth field */
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
/* defines for IO Unit Page 7 PCIeSpeed field */
#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
/* defines for IO Unit Page 7 ProcessorState field */
#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
/* defines for IO Unit Page 7 PowerManagementCapabilities field */
#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008)
#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004)
/* defines for IO Unit Page 7 IOCTemperatureUnits field */
#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
/* defines for IO Unit Page 7 IOCSpeed field */
#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
/* defines for IO Unit Page 7 BoardTemperatureUnits field */
#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00)
#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
/****************************************************************************
* IOC Config Pages
****************************************************************************/
/* IOC Page 0 */
typedef struct _MPI2_CONFIG_PAGE_IOC_0
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x04 */
U32 Reserved2; /* 0x08 */
U16 VendorID; /* 0x0C */
U16 DeviceID; /* 0x0E */
U8 RevisionID; /* 0x10 */
U8 Reserved3; /* 0x11 */
U16 Reserved4; /* 0x12 */
U32 ClassCode; /* 0x14 */
U16 SubsystemVendorID; /* 0x18 */
U16 SubsystemID; /* 0x1A */
} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0,
Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t;
#define MPI2_IOCPAGE0_PAGEVERSION (0x02)
/* IOC Page 1 */
typedef struct _MPI2_CONFIG_PAGE_IOC_1
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 Flags; /* 0x04 */
U32 CoalescingTimeout; /* 0x08 */
U8 CoalescingDepth; /* 0x0C */
U8 PCISlotNum; /* 0x0D */
U8 PCIBusNum; /* 0x0E */
U8 PCIDomainSegment; /* 0x0F */
U32 Reserved1; /* 0x10 */
U32 Reserved2; /* 0x14 */
} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1,
Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t;
#define MPI2_IOCPAGE1_PAGEVERSION (0x05)
/* defines for IOC Page 1 Flags field */
#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001)
#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF)
#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF)
/* IOC Page 6 */
typedef struct _MPI2_CONFIG_PAGE_IOC_6
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 CapabilitiesFlags; /* 0x04 */
U8 MaxDrivesRAID0; /* 0x08 */
U8 MaxDrivesRAID1; /* 0x09 */
U8 MaxDrivesRAID1E; /* 0x0A */
U8 MaxDrivesRAID10; /* 0x0B */
U8 MinDrivesRAID0; /* 0x0C */
U8 MinDrivesRAID1; /* 0x0D */
U8 MinDrivesRAID1E; /* 0x0E */
U8 MinDrivesRAID10; /* 0x0F */
U32 Reserved1; /* 0x10 */
U8 MaxGlobalHotSpares; /* 0x14 */
U8 MaxPhysDisks; /* 0x15 */
U8 MaxVolumes; /* 0x16 */
U8 MaxConfigs; /* 0x17 */
U8 MaxOCEDisks; /* 0x18 */
U8 Reserved2; /* 0x19 */
U16 Reserved3; /* 0x1A */
U32 SupportedStripeSizeMapRAID0; /* 0x1C */
U32 SupportedStripeSizeMapRAID1E; /* 0x20 */
U32 SupportedStripeSizeMapRAID10; /* 0x24 */
U32 Reserved4; /* 0x28 */
U32 Reserved5; /* 0x2C */
U16 DefaultMetadataSize; /* 0x30 */
U16 Reserved6; /* 0x32 */
U16 MaxBadBlockTableEntries; /* 0x34 */
U16 Reserved7; /* 0x36 */
U32 IRNvsramVersion; /* 0x38 */
} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6,
Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t;
#define MPI2_IOCPAGE6_PAGEVERSION (0x04)
/* defines for IOC Page 6 CapabilitiesFlags */
#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010)
#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008)
#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004)
#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002)
#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
/* IOC Page 7 */
#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4)
typedef struct _MPI2_CONFIG_PAGE_IOC_7
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x04 */
U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */
U16 SASBroadcastPrimitiveMasks; /* 0x18 */
U16 Reserved2; /* 0x1A */
U32 Reserved3; /* 0x1C */
} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7,
Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t;
#define MPI2_IOCPAGE7_PAGEVERSION (0x01)
/* IOC Page 8 */
typedef struct _MPI2_CONFIG_PAGE_IOC_8
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U8 NumDevsPerEnclosure; /* 0x04 */
U8 Reserved1; /* 0x05 */
U16 Reserved2; /* 0x06 */
U16 MaxPersistentEntries; /* 0x08 */
U16 MaxNumPhysicalMappedIDs; /* 0x0A */
U16 Flags; /* 0x0C */
U16 Reserved3; /* 0x0E */
U16 IRVolumeMappingFlags; /* 0x10 */
U16 Reserved4; /* 0x12 */
U32 Reserved5; /* 0x14 */
} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8,
Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t;
#define MPI2_IOCPAGE8_PAGEVERSION (0x00)
/* defines for IOC Page 8 Flags field */
#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020)
#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010)
#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E)
#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000)
#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002)
#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001)
#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000)
/* defines for IOC Page 8 IRVolumeMappingFlags */
#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003)
#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000)
#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001)
/****************************************************************************
* BIOS Config Pages
****************************************************************************/
/* BIOS Page 1 */
typedef struct _MPI2_CONFIG_PAGE_BIOS_1
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 BiosOptions; /* 0x04 */
U32 IOCSettings; /* 0x08 */
U32 Reserved1; /* 0x0C */
U32 DeviceSettings; /* 0x10 */
U16 NumberOfDevices; /* 0x14 */
U16 Reserved2; /* 0x16 */
U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */
U16 IOTimeoutSequential; /* 0x1A */
U16 IOTimeoutOther; /* 0x1C */
U16 IOTimeoutBlockDevicesRM; /* 0x1E */
} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1,
Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t;
#define MPI2_BIOSPAGE1_PAGEVERSION (0x04)
/* values for BIOS Page 1 BiosOptions field */
#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
/* values for BIOS Page 1 IOCSettings field */
#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
/* values for BIOS Page 1 DeviceSettings field */
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
/* BIOS Page 2 */
typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER
{
U32 Reserved1; /* 0x00 */
U32 Reserved2; /* 0x04 */
U32 Reserved3; /* 0x08 */
U32 Reserved4; /* 0x0C */
U32 Reserved5; /* 0x10 */
U32 Reserved6; /* 0x14 */
} MPI2_BOOT_DEVICE_ADAPTER_ORDER,
MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t;
typedef struct _MPI2_BOOT_DEVICE_SAS_WWID
{
U64 SASAddress; /* 0x00 */
U8 LUN[8]; /* 0x08 */
U32 Reserved1; /* 0x10 */
U32 Reserved2; /* 0x14 */
} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID,
Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t;
typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT
{
U64 EnclosureLogicalID; /* 0x00 */
U32 Reserved1; /* 0x08 */
U32 Reserved2; /* 0x0C */
U16 SlotNumber; /* 0x10 */
U16 Reserved3; /* 0x12 */
U32 Reserved4; /* 0x14 */
} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t;
typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME
{
U64 DeviceName; /* 0x00 */
U8 LUN[8]; /* 0x08 */
U32 Reserved1; /* 0x10 */
U32 Reserved2; /* 0x14 */
} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t;
typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE
{
MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder;
MPI2_BOOT_DEVICE_SAS_WWID SasWwid;
MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName;
} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t;
typedef struct _MPI2_CONFIG_PAGE_BIOS_2
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x04 */
U32 Reserved2; /* 0x08 */
U32 Reserved3; /* 0x0C */
U32 Reserved4; /* 0x10 */
U32 Reserved5; /* 0x14 */
U32 Reserved6; /* 0x18 */
U8 ReqBootDeviceForm; /* 0x1C */
U8 Reserved7; /* 0x1D */
U16 Reserved8; /* 0x1E */
MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */
U8 ReqAltBootDeviceForm; /* 0x38 */
U8 Reserved9; /* 0x39 */
U16 Reserved10; /* 0x3A */
MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */
U8 CurrentBootDeviceForm; /* 0x58 */
U8 Reserved11; /* 0x59 */
U16 Reserved12; /* 0x5A */
MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */
} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2,
Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t;
#define MPI2_BIOSPAGE2_PAGEVERSION (0x04)
/* values for BIOS Page 2 BootDeviceForm fields */
#define MPI2_BIOSPAGE2_FORM_MASK (0x0F)
#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00)
#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05)
#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07)
/* BIOS Page 3 */
typedef struct _MPI2_ADAPTER_INFO
{
U8 PciBusNumber; /* 0x00 */
U8 PciDeviceAndFunctionNumber; /* 0x01 */
U16 AdapterFlags; /* 0x02 */
} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO,
Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t;
#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
typedef struct _MPI2_CONFIG_PAGE_BIOS_3
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U32 GlobalFlags; /* 0x04 */
U32 BiosVersion; /* 0x08 */
MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */
U32 Reserved1; /* 0x1C */
} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3,
Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t;
#define MPI2_BIOSPAGE3_PAGEVERSION (0x00)
/* values for BIOS Page 3 GlobalFlags */
#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004)
#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010)
#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020)
#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
/* BIOS Page 4 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
#endif
typedef struct _MPI2_BIOS4_ENTRY
{
U64 ReassignmentWWID; /* 0x00 */
U64 ReassignmentDeviceName; /* 0x08 */
} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY,
Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t;
typedef struct _MPI2_CONFIG_PAGE_BIOS_4
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U8 NumPhys; /* 0x04 */
U8 Reserved1; /* 0x05 */
U16 Reserved2; /* 0x06 */
MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */
} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4,
Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t;
#define MPI2_BIOSPAGE4_PAGEVERSION (0x01)
/****************************************************************************
* RAID Volume Config Pages
****************************************************************************/
/* RAID Volume Page 0 */
typedef struct _MPI2_RAIDVOL0_PHYS_DISK
{
U8 RAIDSetNum; /* 0x00 */
U8 PhysDiskMap; /* 0x01 */
U8 PhysDiskNum; /* 0x02 */
U8 Reserved; /* 0x03 */
} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK,
Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t;
/* defines for the PhysDiskMap field */
#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
typedef struct _MPI2_RAIDVOL0_SETTINGS
{
U16 Settings; /* 0x00 */
U8 HotSparePool; /* 0x01 */
U8 Reserved; /* 0x02 */
} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS,
Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t;
/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01)
#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02)
#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04)
#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08)
#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10)
#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20)
#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40)
#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80)
/* RAID Volume Page 0 VolumeSettings defines */
#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008)
#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003)
#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000)
#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001)
#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhysDisks at runtime.
*/
#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U16 DevHandle; /* 0x04 */
U8 VolumeState; /* 0x06 */
U8 VolumeType; /* 0x07 */
U32 VolumeStatusFlags; /* 0x08 */
MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */
U64 MaxLBA; /* 0x10 */
U32 StripeSize; /* 0x18 */
U16 BlockSize; /* 0x1C */
U16 Reserved1; /* 0x1E */
U8 SupportedPhysDisks; /* 0x20 */
U8 ResyncRate; /* 0x21 */
U16 DataScrubDuration; /* 0x22 */
U8 NumPhysDisks; /* 0x24 */
U8 Reserved2; /* 0x25 */
U8 Reserved3; /* 0x26 */
U8 InactiveStatus; /* 0x27 */
MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */
} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t;
#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A)
/* values for RAID VolumeState */
#define MPI2_RAID_VOL_STATE_MISSING (0x00)
#define MPI2_RAID_VOL_STATE_FAILED (0x01)
#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02)
#define MPI2_RAID_VOL_STATE_ONLINE (0x03)
#define MPI2_RAID_VOL_STATE_DEGRADED (0x04)
#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05)
/* values for RAID VolumeType */
#define MPI2_RAID_VOL_TYPE_RAID0 (0x00)
#define MPI2_RAID_VOL_TYPE_RAID1E (0x01)
#define MPI2_RAID_VOL_TYPE_RAID1 (0x02)
#define MPI2_RAID_VOL_TYPE_RAID10 (0x05)
#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF)
/* values for RAID Volume Page 0 VolumeStatusFlags field */
#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000)
#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000)
#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000)
#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000)
#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000)
#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000)
#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000)
#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000)
#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000)
#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000)
#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080)
#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040)
#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020)
#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000)
#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010)
#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008)
#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004)
#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002)
#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001)
/* values for RAID Volume Page 0 SupportedPhysDisks field */
#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08)
#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04)
#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02)
#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01)
/* values for RAID Volume Page 0 InactiveStatus field */
#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01)
#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02)
#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04)
#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06)
/* RAID Volume Page 1 */
typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U16 DevHandle; /* 0x04 */
U16 Reserved0; /* 0x06 */
U8 GUID[24]; /* 0x08 */
U8 Name[16]; /* 0x20 */
U64 WWID; /* 0x30 */
U32 Reserved1; /* 0x38 */
U32 Reserved2; /* 0x3C */
} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t;
#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03)
/****************************************************************************
* RAID Physical Disk Config Pages
****************************************************************************/
/* RAID Physical Disk Page 0 */
typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS
{
U16 Reserved1; /* 0x00 */
U8 HotSparePool; /* 0x02 */
U8 Reserved2; /* 0x03 */
} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t;
/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA
{
U8 VendorID[8]; /* 0x00 */
U8 ProductID[16]; /* 0x08 */
U8 ProductRevLevel[4]; /* 0x18 */
U8 SerialNum[32]; /* 0x1C */
} MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t;
typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U16 DevHandle; /* 0x04 */
U8 Reserved1; /* 0x06 */
U8 PhysDiskNum; /* 0x07 */
MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */
U32 Reserved2; /* 0x0C */
MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */
U32 Reserved3; /* 0x4C */
U8 PhysDiskState; /* 0x50 */
U8 OfflineReason; /* 0x51 */
U8 IncompatibleReason; /* 0x52 */
U8 PhysDiskAttributes; /* 0x53 */
U32 PhysDiskStatusFlags; /* 0x54 */
U64 DeviceMaxLBA; /* 0x58 */
U64 HostMaxLBA; /* 0x60 */
U64 CoercedMaxLBA; /* 0x68 */
U16 BlockSize; /* 0x70 */
U16 Reserved5; /* 0x72 */
U32 Reserved6; /* 0x74 */
} MPI2_CONFIG_PAGE_RD_PDISK_0,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t;
#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05)
/* PhysDiskState defines */
#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00)
#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01)
#define MPI2_RAID_PD_STATE_OFFLINE (0x02)
#define MPI2_RAID_PD_STATE_ONLINE (0x03)
#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04)
#define MPI2_RAID_PD_STATE_DEGRADED (0x05)
#define MPI2_RAID_PD_STATE_REBUILDING (0x06)
#define MPI2_RAID_PD_STATE_OPTIMAL (0x07)
/* OfflineReason defines */
#define MPI2_PHYSDISK0_ONLINE (0x00)
#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01)
#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03)
#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04)
#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05)
#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06)
#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF)
/* IncompatibleReason defines */
#define MPI2_PHYSDISK0_COMPATIBLE (0x00)
#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01)
#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02)
#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03)
#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04)
#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05)
#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06)
#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF)
/* PhysDiskAttributes defines */
#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C)
#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08)
#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04)
#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03)
#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02)
#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01)
/* PhysDiskStatusFlags defines */
#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040)
#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020)
#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010)
#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000)
#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004)
#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002)
#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001)
/* RAID Physical Disk Page 1 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhysDiskPaths at runtime.
*/
#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
#endif
typedef struct _MPI2_RAIDPHYSDISK1_PATH
{
U16 DevHandle; /* 0x00 */
U16 Reserved1; /* 0x02 */
U64 WWID; /* 0x04 */
U64 OwnerWWID; /* 0x0C */
U8 OwnerIdentifier; /* 0x14 */
U8 Reserved2; /* 0x15 */
U16 Flags; /* 0x16 */
} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH,
Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t;
/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004)
#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1
{
MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
U8 NumPhysDiskPaths; /* 0x04 */
U8 PhysDiskNum; /* 0x05 */
U16 Reserved1; /* 0x06 */
U32 Reserved2; /* 0x08 */
MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */
} MPI2_CONFIG_PAGE_RD_PDISK_1,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t;
#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02)
/****************************************************************************
* values for fields used by several types of SAS Config Pages
****************************************************************************/
/* values for NegotiatedLinkRates fields */
#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0)
#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4)
#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
/* link rates used for Negotiated Physical and Logical Link Rate */
#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08)
#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
/* values for AttachedPhyInfo fields */
#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F)
#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
/* values for PhyInfo fields */
#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27)
#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000)
#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000)
#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000)
#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000)
#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000)
#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00)
#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8)
#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0)
#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000)
#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010)
#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020)
/* values for SAS ProgrammedLinkRate fields */
#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0)
#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
/* values for SAS HwLinkRate fields */
#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0)
#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
/****************************************************************************
* SAS IO Unit Config Pages
****************************************************************************/
/* SAS IO Unit Page 0 */
typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA
{
U8 Port; /* 0x00 */
U8 PortFlags; /* 0x01 */
U8 PhyFlags; /* 0x02 */
U8 NegotiatedLinkRate; /* 0x03 */
U32 ControllerPhyDeviceInfo;/* 0x04 */
U16 AttachedDevHandle; /* 0x08 */
U16 ControllerDevHandle; /* 0x0A */
U32 DiscoveryStatus; /* 0x0C */
U32 Reserved; /* 0x10 */
} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t;
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
#define MPI2_SAS_IOUNIT0_PHY_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U8 NumPhys; /* 0x0C */
U8 Reserved2; /* 0x0D */
U16 Reserved3; /* 0x0E */
MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */
} MPI2_CONFIG_PAGE_SASIOUNIT_0,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t;
#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05)
/* values for SAS IO Unit Page 0 PortFlags */
#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08)
#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
/* values for SAS IO Unit Page 0 PhyFlags */
#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10)
#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
/* values for SAS IO Unit Page 0 DiscoveryStatus */
#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000)
#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000)
#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000)
#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400)
#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100)
#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080)
#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040)
#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020)
#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010)
#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004)
#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002)
#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001)
/* SAS IO Unit Page 1 */
typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA
{
U8 Port; /* 0x00 */
U8 PortFlags; /* 0x01 */
U8 PhyFlags; /* 0x02 */
U8 MaxMinLinkRate; /* 0x03 */
U32 ControllerPhyDeviceInfo; /* 0x04 */
U16 MaxTargetPortConnectTime; /* 0x08 */
U16 Reserved1; /* 0x0A */
} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t;
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
#define MPI2_SAS_IOUNIT1_PHY_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 ControlFlags; /* 0x08 */
U16 SASNarrowMaxQueueDepth; /* 0x0A */
U16 AdditionalControlFlags; /* 0x0C */
U16 SASWideMaxQueueDepth; /* 0x0E */
U8 NumPhys; /* 0x10 */
U8 SATAMaxQDepth; /* 0x11 */
U8 ReportDeviceMissingDelay; /* 0x12 */
U8 IODeviceMissingDelay; /* 0x13 */
MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */
} MPI2_CONFIG_PAGE_SASIOUNIT_1,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t;
#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09)
/* values for SAS IO Unit Page 1 ControlFlags */
#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0)
#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1)
#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2)
#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
/* values for SAS IO Unit Page 1 AdditionalControlFlags */
#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80)
/* values for SAS IO Unit Page 1 PortFlags */
#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
/* values for SAS IO Unit Page 1 PhyFlags */
#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
/* values for SAS IO Unit Page 1 MaxMinLinkRate */
#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
/* SAS IO Unit Page 4 */
typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP
{
U8 MaxTargetSpinup; /* 0x00 */
U8 SpinupDelay; /* 0x01 */
U16 Reserved1; /* 0x02 */
} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t;
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
#define MPI2_SAS_IOUNIT4_PHY_MAX (4)
#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */
U32 Reserved1; /* 0x18 */
U32 Reserved2; /* 0x1C */
U32 Reserved3; /* 0x20 */
U8 BootDeviceWaitTime; /* 0x24 */
U8 Reserved4; /* 0x25 */
U16 Reserved5; /* 0x26 */
U8 NumPhys; /* 0x28 */
U8 PEInitialSpinupDelay; /* 0x29 */
U8 PEReplyDelay; /* 0x2A */
U8 Flags; /* 0x2B */
U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */
} MPI2_CONFIG_PAGE_SASIOUNIT_4,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t;
#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02)
/* defines for Flags field */
#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01)
/* defines for PHY field */
#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
/* SAS IO Unit Page 5 */
typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS
{
U8 ControlFlags; /* 0x00 */
U8 PortWidthModGroup; /* 0x01 */
U16 InactivityTimerExponent; /* 0x02 */
U8 SATAPartialTimeout; /* 0x04 */
U8 Reserved2; /* 0x05 */
U8 SATASlumberTimeout; /* 0x06 */
U8 Reserved3; /* 0x07 */
U8 SASPartialTimeout; /* 0x08 */
U8 Reserved4; /* 0x09 */
U8 SASSlumberTimeout; /* 0x0A */
U8 Reserved5; /* 0x0B */
} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t;
/* defines for ControlFlags field */
#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
/* defines for PortWidthModeGroup field */
#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
/* defines for InactivityTimerExponent field */
#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U8 NumPhys; /* 0x08 */
U8 Reserved1; /* 0x09 */
U16 Reserved2; /* 0x0A */
U32 Reserved3; /* 0x0C */
MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */
} MPI2_CONFIG_PAGE_SASIOUNIT_5,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
/* SAS IO Unit Page 6 */
typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
{
U8 CurrentStatus; /* 0x00 */
U8 CurrentModulation; /* 0x01 */
U8 CurrentUtilization; /* 0x02 */
U8 Reserved1; /* 0x03 */
U32 Reserved2; /* 0x04 */
} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
Mpi2SasIOUnit6PortWidthModGroupStatus_t,
MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t;
/* defines for CurrentStatus field */
#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
/* defines for CurrentModulation field */
#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumGroups at runtime.
*/
#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
#define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U32 Reserved2; /* 0x0C */
U8 NumGroups; /* 0x10 */
U8 Reserved3; /* 0x11 */
U16 Reserved4; /* 0x12 */
MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */
} MPI2_CONFIG_PAGE_SASIOUNIT_6,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t;
#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
/* SAS IO Unit Page 7 */
typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
{
U8 Flags; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
U8 Threshold75Pct; /* 0x04 */
U8 Threshold50Pct; /* 0x05 */
U8 Threshold25Pct; /* 0x06 */
U8 Reserved3; /* 0x07 */
} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
Mpi2SasIOUnit7PortWidthModGroupSettings_t,
MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t;
/* defines for Flags field */
#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumGroups at runtime.
*/
#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
#define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U8 SamplingInterval; /* 0x08 */
U8 WindowLength; /* 0x09 */
U16 Reserved1; /* 0x0A */
U32 Reserved2; /* 0x0C */
U32 Reserved3; /* 0x10 */
U8 NumGroups; /* 0x14 */
U8 Reserved4; /* 0x15 */
U16 Reserved5; /* 0x16 */
MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */
} MPI2_CONFIG_PAGE_SASIOUNIT_7,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t;
#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
/* SAS IO Unit Page 8 */
typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U32 PowerManagementCapabilities; /* 0x0C */
U32 Reserved2; /* 0x10 */
} MPI2_CONFIG_PAGE_SASIOUNIT_8,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t;
#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
/* defines for PowerManagementCapabilities field */
#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000)
#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800)
#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400)
#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200)
#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100)
#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010)
#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008)
#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004)
#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002)
#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001)
/****************************************************************************
* SAS Expander Config Pages
****************************************************************************/
/* SAS Expander Page 0 */
typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U8 PhysicalPort; /* 0x08 */
U8 ReportGenLength; /* 0x09 */
U16 EnclosureHandle; /* 0x0A */
U64 SASAddress; /* 0x0C */
U32 DiscoveryStatus; /* 0x14 */
U16 DevHandle; /* 0x18 */
U16 ParentDevHandle; /* 0x1A */
U16 ExpanderChangeCount; /* 0x1C */
U16 ExpanderRouteIndexes; /* 0x1E */
U8 NumPhys; /* 0x20 */
U8 SASLevel; /* 0x21 */
U16 Flags; /* 0x22 */
U16 STPBusInactivityTimeLimit; /* 0x24 */
U16 STPMaxConnectTimeLimit; /* 0x26 */
U16 STP_SMP_NexusLossTime; /* 0x28 */
U16 MaxNumRoutedSasAddresses; /* 0x2A */
U64 ActiveZoneManagerSASAddress;/* 0x2C */
U16 ZoneLockInactivityLimit; /* 0x34 */
U16 Reserved1; /* 0x36 */
U8 TimeToReducedFunc; /* 0x38 */
U8 InitialTimeToReducedFunc; /* 0x39 */
U8 MaxReducedFuncTime; /* 0x3A */
U8 Reserved2; /* 0x3B */
} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t;
#define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
/* values for SAS Expander Page 0 DiscoveryStatus field */
#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000)
#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000)
#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000)
#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800)
#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400)
#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200)
#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100)
#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080)
#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040)
#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020)
#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010)
#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004)
#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002)
#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
/* values for SAS Expander Page 0 Flags field */
#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
/* SAS Expander Page 1 */
typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U8 PhysicalPort; /* 0x08 */
U8 Reserved1; /* 0x09 */
U16 Reserved2; /* 0x0A */
U8 NumPhys; /* 0x0C */
U8 Phy; /* 0x0D */
U16 NumTableEntriesProgrammed; /* 0x0E */
U8 ProgrammedLinkRate; /* 0x10 */
U8 HwLinkRate; /* 0x11 */
U16 AttachedDevHandle; /* 0x12 */
U32 PhyInfo; /* 0x14 */
U32 AttachedDeviceInfo; /* 0x18 */
U16 ExpanderDevHandle; /* 0x1C */
U8 ChangeCount; /* 0x1E */
U8 NegotiatedLinkRate; /* 0x1F */
U8 PhyIdentifier; /* 0x20 */
U8 AttachedPhyIdentifier; /* 0x21 */
U8 Reserved3; /* 0x22 */
U8 DiscoveryInfo; /* 0x23 */
U32 AttachedPhyInfo; /* 0x24 */
U8 ZoneGroup; /* 0x28 */
U8 SelfConfigStatus; /* 0x29 */
U16 Reserved4; /* 0x2A */
} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t;
#define MPI2_SASEXPANDER1_PAGEVERSION (0x02)
/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */
/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */
/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
/* values for SAS Expander Page 1 DiscoveryInfo field */
#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
/****************************************************************************
* SAS Device Config Pages
****************************************************************************/
/* SAS Device Page 0 */
typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 Slot; /* 0x08 */
U16 EnclosureHandle; /* 0x0A */
U64 SASAddress; /* 0x0C */
U16 ParentDevHandle; /* 0x14 */
U8 PhyNum; /* 0x16 */
U8 AccessStatus; /* 0x17 */
U16 DevHandle; /* 0x18 */
U8 AttachedPhyIdentifier; /* 0x1A */
U8 ZoneGroup; /* 0x1B */
U32 DeviceInfo; /* 0x1C */
U16 Flags; /* 0x20 */
U8 PhysicalPort; /* 0x22 */
U8 MaxPortConnections; /* 0x23 */
U64 DeviceName; /* 0x24 */
U8 PortGroups; /* 0x2C */
U8 DmaGroup; /* 0x2D */
U8 ControlGroup; /* 0x2E */
U8 Reserved1; /* 0x2F */
U32 Reserved2; /* 0x30 */
U32 Reserved3; /* 0x34 */
} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t;
#define MPI2_SASDEVICE0_PAGEVERSION (0x08)
/* values for SAS Device Page 0 AccessStatus field */
#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05)
#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06)
#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07)
/* specific values for SATA Init failures */
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
/* values for SAS Device Page 0 Flags field */
#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
/* SAS Device Page 1 */
typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U64 SASAddress; /* 0x0C */
U32 Reserved2; /* 0x14 */
U16 DevHandle; /* 0x18 */
U16 Reserved3; /* 0x1A */
U8 InitialRegDeviceFIS[20];/* 0x1C */
} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t;
#define MPI2_SASDEVICE1_PAGEVERSION (0x01)
/****************************************************************************
* SAS PHY Config Pages
****************************************************************************/
/* SAS PHY Page 0 */
typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 OwnerDevHandle; /* 0x08 */
U16 Reserved1; /* 0x0A */
U16 AttachedDevHandle; /* 0x0C */
U8 AttachedPhyIdentifier; /* 0x0E */
U8 Reserved2; /* 0x0F */
U32 AttachedPhyInfo; /* 0x10 */
U8 ProgrammedLinkRate; /* 0x14 */
U8 HwLinkRate; /* 0x15 */
U8 ChangeCount; /* 0x16 */
U8 Flags; /* 0x17 */
U32 PhyInfo; /* 0x18 */
U8 NegotiatedLinkRate; /* 0x1C */
U8 Reserved3; /* 0x1D */
U16 Reserved4; /* 0x1E */
} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t;
#define MPI2_SASPHY0_PAGEVERSION (0x03)
/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
/* values for SAS PHY Page 0 Flags field */
#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */
/* SAS PHY Page 1 */
typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U32 InvalidDwordCount; /* 0x0C */
U32 RunningDisparityErrorCount; /* 0x10 */
U32 LossDwordSynchCount; /* 0x14 */
U32 PhyResetProblemCount; /* 0x18 */
} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t;
#define MPI2_SASPHY1_PAGEVERSION (0x01)
/* SAS PHY Page 2 */
typedef struct _MPI2_SASPHY2_PHY_EVENT
{
U8 PhyEventCode; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
U32 PhyEventInfo; /* 0x04 */
} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT,
Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t;
/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhyEvents at runtime.
*/
#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U8 NumPhyEvents; /* 0x0C */
U8 Reserved2; /* 0x0D */
U16 Reserved3; /* 0x0E */
MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /* 0x10 */
} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t;
#define MPI2_SASPHY2_PAGEVERSION (0x00)
/* SAS PHY Page 3 */
typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG
{
U8 PhyEventCode; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
U8 CounterType; /* 0x04 */
U8 ThresholdWindow; /* 0x05 */
U8 TimeUnits; /* 0x06 */
U8 Reserved3; /* 0x07 */
U32 EventThreshold; /* 0x08 */
U16 ThresholdFlags; /* 0x0C */
U16 Reserved4; /* 0x0E */
} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t;
/* values for PhyEventCode field */
#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
/* values for the CounterType field */
#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
/* values for the TimeUnits field */
#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
/* values for the ThresholdFlags field */
#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumPhyEvents at runtime.
*/
#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
#endif
typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U8 NumPhyEvents; /* 0x0C */
U8 Reserved2; /* 0x0D */
U16 Reserved3; /* 0x0E */
MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */
} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t;
#define MPI2_SASPHY3_PAGEVERSION (0x00)
/* SAS PHY Page 4 */
typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U16 Reserved1; /* 0x08 */
U8 Reserved2; /* 0x0A */
U8 Flags; /* 0x0B */
U8 InitialFrame[28]; /* 0x0C */
} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t;
#define MPI2_SASPHY4_PAGEVERSION (0x00)
/* values for the Flags field */
#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02)
#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01)
/****************************************************************************
* SAS Port Config Pages
****************************************************************************/
/* SAS Port Page 0 */
typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U8 PortNumber; /* 0x08 */
U8 PhysicalPort; /* 0x09 */
U8 PortWidth; /* 0x0A */
U8 PhysicalPortWidth; /* 0x0B */
U8 ZoneGroup; /* 0x0C */
U8 Reserved1; /* 0x0D */
U16 Reserved2; /* 0x0E */
U64 SASAddress; /* 0x10 */
U32 DeviceInfo; /* 0x18 */
U32 Reserved3; /* 0x1C */
U32 Reserved4; /* 0x20 */
} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t;
#define MPI2_SASPORT0_PAGEVERSION (0x00)
/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
/****************************************************************************
* SAS Enclosure Config Pages
****************************************************************************/
/* SAS Enclosure Page 0 */
typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U64 EnclosureLogicalID; /* 0x0C */
U16 Flags; /* 0x14 */
U16 EnclosureHandle; /* 0x16 */
U16 NumSlots; /* 0x18 */
U16 StartSlot; /* 0x1A */
U16 Reserved2; /* 0x1C */
U16 SEPDevHandle; /* 0x1E */
U32 Reserved3; /* 0x20 */
U32 Reserved4; /* 0x24 */
} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t;
#define MPI2_SASENCLOSURE0_PAGEVERSION (0x03)
/* values for SAS Enclosure Page 0 Flags field */
#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
/****************************************************************************
* Log Config Page
****************************************************************************/
/* Log Page 0 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumLogEntries at runtime.
*/
#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
#define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
#endif
#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C)
typedef struct _MPI2_LOG_0_ENTRY
{
U64 TimeStamp; /* 0x00 */
U32 Reserved1; /* 0x08 */
U16 LogSequence; /* 0x0C */
U16 LogEntryQualifier; /* 0x0E */
U8 VP_ID; /* 0x10 */
U8 VF_ID; /* 0x11 */
U16 Reserved2; /* 0x12 */
U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */
} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY,
Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t;
/* values for Log Page 0 LogEntry LogEntryQualifier field */
#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000)
#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001)
#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002)
#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000)
#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF)
typedef struct _MPI2_CONFIG_PAGE_LOG_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved1; /* 0x08 */
U32 Reserved2; /* 0x0C */
U16 NumLogEntries; /* 0x10 */
U16 Reserved3; /* 0x12 */
MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */
} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0,
Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t;
#define MPI2_LOG_0_PAGEVERSION (0x02)
/****************************************************************************
* RAID Config Page
****************************************************************************/
/* RAID Page 0 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check the value returned for NumElements at runtime.
*/
#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
#endif
typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT
{
U16 ElementFlags; /* 0x00 */
U16 VolDevHandle; /* 0x02 */
U8 HotSparePool; /* 0x04 */
U8 PhysDiskNum; /* 0x05 */
U16 PhysDiskDevHandle; /* 0x06 */
} MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t;
/* values for the ElementFlags field */
#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F)
#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000)
#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001)
#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002)
#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003)
typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U8 NumHotSpares; /* 0x08 */
U8 NumPhysDisks; /* 0x09 */
U8 NumVolumes; /* 0x0A */
U8 ConfigNum; /* 0x0B */
U32 Flags; /* 0x0C */
U8 ConfigGUID[24]; /* 0x10 */
U32 Reserved1; /* 0x28 */
U8 NumElements; /* 0x2C */
U8 Reserved2; /* 0x2D */
U16 Reserved3; /* 0x2E */
MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */
} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t;
#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00)
/* values for RAID Configuration Page 0 Flags field */
#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001)
/****************************************************************************
* Driver Persistent Mapping Config Pages
****************************************************************************/
/* Driver Persistent Mapping Page 0 */
typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY
{
U64 PhysicalIdentifier; /* 0x00 */
U16 MappingInformation; /* 0x08 */
U16 DeviceIndex; /* 0x0A */
U32 PhysicalBitsMapping; /* 0x0C */
U32 Reserved1; /* 0x10 */
} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t;
typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */
} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t;
#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00)
/* values for Driver Persistent Mapping Page 0 MappingInformation field */
#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0)
#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4)
#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
/****************************************************************************
* Ethernet Config Pages
****************************************************************************/
/* Ethernet Page 0 */
/* IP address (union of IPv4 and IPv6) */
typedef union _MPI2_ETHERNET_IP_ADDR
{
U32 IPv4Addr;
U32 IPv6Addr[4];
} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR,
Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t;
#define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U8 NumInterfaces; /* 0x08 */
U8 Reserved0; /* 0x09 */
U16 Reserved1; /* 0x0A */
U32 Status; /* 0x0C */
U8 MediaState; /* 0x10 */
U8 Reserved2; /* 0x11 */
U16 Reserved3; /* 0x12 */
U8 MacAddress[6]; /* 0x14 */
U8 Reserved4; /* 0x1A */
U8 Reserved5; /* 0x1B */
MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */
MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */
MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */
MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */
MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */
MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */
U8 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t;
#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
/* values for Ethernet Page 0 Status field */
#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
/* values for Ethernet Page 0 MediaState field */
#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
#define MPI2_ETHPG0_MS_10MBIT (0x01)
#define MPI2_ETHPG0_MS_100MBIT (0x02)
#define MPI2_ETHPG0_MS_1GBIT (0x03)
/* Ethernet Page 1 */
typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 Reserved0; /* 0x08 */
U32 Flags; /* 0x0C */
U8 MediaState; /* 0x10 */
U8 Reserved1; /* 0x11 */
U16 Reserved2; /* 0x12 */
U8 MacAddress[6]; /* 0x14 */
U8 Reserved3; /* 0x1A */
U8 Reserved4; /* 0x1B */
MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */
MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */
MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */
MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */
MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */
U32 Reserved5; /* 0x6C */
U32 Reserved6; /* 0x70 */
U32 Reserved7; /* 0x74 */
U32 Reserved8; /* 0x78 */
U8 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t;
#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
/* values for Ethernet Page 1 Flags field */
#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
/* values for Ethernet Page 1 MediaState field */
#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
/****************************************************************************
* Extended Manufacturing Config Pages
****************************************************************************/
/*
* Generic structure to use for product-specific extended manufacturing pages
* (currently Extended Manufacturing Page 40 through Extended Manufacturing
* Page 60).
*/
typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
U32 ProductSpecificInfo; /* 0x08 */
} MPI2_CONFIG_PAGE_EXT_MAN_PS,
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
Mpi2ExtManufacturingPagePS_t, MPI2_POINTER pMpi2ExtManufacturingPagePS_t;
/* PageVersion should be provided by product-specific code */
#endif