| Current Path : /sys/dev/mps/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/dev/mps/mps_config.c |
/*-
* Copyright (c) 2011, 2012 LSI Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* LSI MPT-Fusion Host Adapter FreeBSD
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/mps/mps_config.c 237876 2012-07-01 05:22:45Z ken $");
/* TODO Move headers to mpsvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/sysctl.h>
#include <sys/eventhandler.h>
#include <sys/uio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/mps/mpi/mpi2_type.h>
#include <dev/mps/mpi/mpi2.h>
#include <dev/mps/mpi/mpi2_ioc.h>
#include <dev/mps/mpi/mpi2_sas.h>
#include <dev/mps/mpi/mpi2_cnfg.h>
#include <dev/mps/mpi/mpi2_init.h>
#include <dev/mps/mpi/mpi2_tool.h>
#include <dev/mps/mps_ioctl.h>
#include <dev/mps/mpsvar.h>
/**
* mps_config_get_ioc_pg8 - obtain ioc page 8
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_ioc_pg8(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2IOCPage8_t *config_page)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
MPI2_CONFIG_PAGE_IOC_8 *page = NULL;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
request->Header.PageNumber = 8;
request->Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
request->Header.PageNumber = 8;
request->Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
request->Header.PageLength = mpi_reply->Header.PageLength;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc((cm->cm_length), M_MPT2, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length, (sizeof(Mpi2IOCPage8_t))));
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}
/**
* mps_config_get_man_pg10 - obtain Manufacturing Page 10 data and set flags
* accordingly. Currently, this page does not need to return to caller.
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_man_pg10(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
pMpi2ManufacturingPagePS_t page = NULL;
uint32_t *pPS_info;
uint8_t OEM_Value = 0;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
request->Header.PageNumber = 10;
request->Header.PageVersion = MPI2_MANUFACTURING10_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
request->Header.PageNumber = 10;
request->Header.PageVersion = MPI2_MANUFACTURING10_PAGEVERSION;
request->Header.PageLength = mpi_reply->Header.PageLength;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(MPS_MAN_PAGE10_SIZE, M_MPT2, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/*
* If OEM ID is unknown, fail the request.
*/
sc->WD_hide_expose = MPS_WD_HIDE_ALWAYS;
OEM_Value = (uint8_t)(page->ProductSpecificInfo & 0x000000FF);
if (OEM_Value != MPS_WD_LSI_OEM) {
mps_dprint(sc, MPS_FAULT, "Unknown OEM value for WarpDrive "
"(0x%x)\n", OEM_Value);
error = ENXIO;
goto out;
}
/*
* Set the phys disks hide/expose value.
*/
pPS_info = &page->ProductSpecificInfo;
sc->WD_hide_expose = (uint8_t)(pPS_info[5]);
sc->WD_hide_expose &= MPS_WD_HIDE_EXPOSE_MASK;
if ((sc->WD_hide_expose != MPS_WD_HIDE_ALWAYS) &&
(sc->WD_hide_expose != MPS_WD_EXPOSE_ALWAYS) &&
(sc->WD_hide_expose != MPS_WD_HIDE_IF_VOLUME)) {
mps_dprint(sc, MPS_FAULT, "Unknown value for WarpDrive "
"hide/expose: 0x%x\n", sc->WD_hide_expose);
error = ENXIO;
goto out;
}
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}
/**
* mps_base_static_config_pages - static start of day config pages.
* @sc: per adapter object
*
* Return nothing.
*/
void
mps_base_static_config_pages(struct mps_softc *sc)
{
Mpi2ConfigReply_t mpi_reply;
int retry;
retry = 0;
while (mps_config_get_ioc_pg8(sc, &mpi_reply, &sc->ioc_pg8)) {
retry++;
if (retry > 5) {
/* We need to Handle this situation */
/*FIXME*/
break;
}
}
}
/**
* mps_wd_config_pages - get info required to support WarpDrive. This needs to
* be called after discovery is complete to guarentee that IR info is there.
* @sc: per adapter object
*
* Return nothing.
*/
void
mps_wd_config_pages(struct mps_softc *sc)
{
Mpi2ConfigReply_t mpi_reply;
pMpi2RaidVolPage0_t raid_vol_pg0 = NULL;
Mpi2RaidPhysDiskPage0_t phys_disk_pg0;
pMpi2RaidVol0PhysDisk_t pRVPD;
uint32_t stripe_size, phys_disk_page_address;
uint16_t block_size;
uint8_t index, stripe_exp = 0, block_exp = 0;
/*
* Get the WD settings from manufacturing page 10 if using a WD HBA.
* This will be used to determine if phys disks should always be
* hidden, hidden only if part of a WD volume, or never hidden. Also,
* get the WD RAID Volume info and fail if volume does not exist or if
* volume does not meet the requirements for a WD volume. No retry
* here. Just default to HIDE ALWAYS if man Page10 fails, or clear WD
* Valid flag if Volume info fails.
*/
sc->WD_valid_config = FALSE;
if (sc->mps_flags & MPS_FLAGS_WD_AVAILABLE) {
if (mps_config_get_man_pg10(sc, &mpi_reply)) {
mps_dprint(sc, MPS_FAULT,
"mps_config_get_man_pg10 failed! Using 0 (Hide "
"Always) for WarpDrive hide/expose value.\n");
sc->WD_hide_expose = MPS_WD_HIDE_ALWAYS;
}
/*
* Get first RAID Volume Page0 using GET_NEXT_HANDLE.
*/
raid_vol_pg0 = malloc(sizeof(Mpi2RaidVolPage0_t) +
(sizeof(Mpi2RaidVol0PhysDisk_t) * MPS_MAX_DISKS_IN_VOL),
M_MPT2, M_ZERO | M_NOWAIT);
if (!raid_vol_pg0) {
printf("%s: page alloc failed\n", __func__);
goto out;
}
if (mps_config_get_raid_volume_pg0(sc, &mpi_reply, raid_vol_pg0,
0x0000FFFF)) {
mps_dprint(sc, MPS_INFO,
"mps_config_get_raid_volume_pg0 failed! Assuming "
"WarpDrive IT mode.\n");
goto out;
}
/*
* Check for valid WD configuration:
* volume type is RAID0
* number of phys disks in the volume is no more than 8
*/
if ((raid_vol_pg0->VolumeType != MPI2_RAID_VOL_TYPE_RAID0) ||
(raid_vol_pg0->NumPhysDisks > 8)) {
mps_dprint(sc, MPS_FAULT,
"Invalid WarpDrive configuration. Direct Drive I/O "
"will not be used.\n");
goto out;
}
/*
* Save the WD RAID data to be used during WD I/O.
*/
sc->DD_max_lba = le64toh((uint64_t)raid_vol_pg0->MaxLBA.High <<
32 | (uint64_t)raid_vol_pg0->MaxLBA.Low);
sc->DD_num_phys_disks = raid_vol_pg0->NumPhysDisks;
sc->DD_dev_handle = raid_vol_pg0->DevHandle;
sc->DD_stripe_size = raid_vol_pg0->StripeSize;
sc->DD_block_size = raid_vol_pg0->BlockSize;
/*
* Find power of 2 of stripe size and set this as the exponent.
* Fail if stripe size is 0.
*/
stripe_size = raid_vol_pg0->StripeSize;
for (index = 0; index < 32; index++) {
if (stripe_size & 1)
break;
stripe_exp++;
stripe_size >>= 1;
}
if (index == 32) {
mps_dprint(sc, MPS_FAULT,
"RAID Volume's stripe size is 0. Direct Drive I/O "
"will not be used.\n");
goto out;
}
sc->DD_stripe_exponent = stripe_exp;
/*
* Find power of 2 of block size and set this as the exponent.
* Fail if block size is 0.
*/
block_size = raid_vol_pg0->BlockSize;
for (index = 0; index < 16; index++) {
if (block_size & 1)
break;
block_exp++;
block_size >>= 1;
}
if (index == 16) {
mps_dprint(sc, MPS_FAULT,
"RAID Volume's block size is 0. Direct Drive I/O "
"will not be used.\n");
goto out;
}
sc->DD_block_exponent = block_exp;
/*
* Loop through all of the volume's Phys Disks to map the phys
* disk number into the columm map. This is used during Direct
* Drive I/O to send the request to the correct SSD.
*/
pRVPD = (pMpi2RaidVol0PhysDisk_t)&raid_vol_pg0->PhysDisk;
for (index = 0; index < raid_vol_pg0->NumPhysDisks; index++) {
sc->DD_column_map[pRVPD->PhysDiskMap].phys_disk_num =
pRVPD->PhysDiskNum;
pRVPD++;
}
/*
* Get second RAID Volume Page0 using previous handle. This
* page should not exist. If it does, must not proceed with WD
* handling.
*/
if (mps_config_get_raid_volume_pg0(sc, &mpi_reply,
raid_vol_pg0, (u32)raid_vol_pg0->DevHandle)) {
if (mpi_reply.IOCStatus !=
MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) {
mps_dprint(sc, MPS_FAULT,
"Multiple RAID Volume Page0! Direct Drive "
"I/O will not be used.\n");
goto out;
}
} else {
mps_dprint(sc, MPS_FAULT,
"Multiple volumes! Direct Drive I/O will not be "
"used.\n");
goto out;
}
/*
* Get RAID Volume Phys Disk Page 0 for all SSDs in the volume.
*/
for (index = 0; index < raid_vol_pg0->NumPhysDisks; index++) {
phys_disk_page_address =
MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM +
sc->DD_column_map[index].phys_disk_num;
if (mps_config_get_raid_pd_pg0(sc, &mpi_reply,
&phys_disk_pg0, phys_disk_page_address)) {
mps_dprint(sc, MPS_FAULT,
"mps_config_get_raid_pd_pg0 failed! Direct "
"Drive I/O will not be used.\n");
goto out;
}
if (phys_disk_pg0.DevHandle == 0xFFFF) {
mps_dprint(sc, MPS_FAULT,
"Invalid Phys Disk DevHandle! Direct Drive "
"I/O will not be used.\n");
goto out;
}
sc->DD_column_map[index].dev_handle =
phys_disk_pg0.DevHandle;
}
sc->WD_valid_config = TRUE;
out:
if (raid_vol_pg0)
free(raid_vol_pg0, M_MPT2);
}
}
/**
* mps_config_get_dpm_pg0 - obtain driver persistent mapping page0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_dpm_pg0(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2DriverMappingPage0_t *config_page, u16 sz)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
Mpi2DriverMappingPage0_t *page = NULL;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
memset(config_page, 0, sz);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION;
request->PageAddress = sc->max_dpm_entries <<
MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_NVRAM;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION;
request->PageAddress = sc->max_dpm_entries <<
MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT;
request->ExtPageLength = mpi_reply->ExtPageLength;
cm->cm_length = le16toh(request->ExtPageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPT2, M_ZERO|M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length, sz));
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}
/**
* mps_config_set_dpm_pg0 - write an entry in driver persistent mapping page0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @entry_idx: entry index in DPM Page0 to be modified
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int mps_config_set_dpm_pg0(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2DriverMappingPage0_t *config_page, u16 entry_idx)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 *page = NULL;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION;
/* We can remove below two lines ????*/
request->PageAddress = 1 << MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT;
request->PageAddress |= htole16(entry_idx);
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION;
request->ExtPageLength = mpi_reply->ExtPageLength;
request->PageAddress = 1 << MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT;
request->PageAddress |= htole16(entry_idx);
cm->cm_length = le16toh(mpi_reply->ExtPageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAOUT;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
bcopy(config_page, page, MIN(cm->cm_length,
(sizeof(Mpi2DriverMappingPage0_t))));
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page written with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}
/**
* mps_config_get_sas_device_pg0 - obtain sas device page 0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: device handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_sas_device_pg0(struct mps_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u16 handle)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
Mpi2SasDevicePage0_t *page = NULL;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
request->ExtPageLength = mpi_reply->ExtPageLength;
request->PageAddress = htole32(form | handle);
cm->cm_length = le16toh(mpi_reply->ExtPageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length,
sizeof(Mpi2SasDevicePage0_t)));
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}
/**
* mps_config_get_bios_pg3 - obtain BIOS page 3
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_bios_pg3(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2BiosPage3_t *config_page)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
Mpi2BiosPage3_t *page = NULL;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
request->Header.PageNumber = 3;
request->Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
request->Header.PageNumber = 3;
request->Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
request->Header.PageLength = mpi_reply->Header.PageLength;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length, sizeof(Mpi2BiosPage3_t)));
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}
/**
* mps_config_get_raid_volume_pg0 - obtain raid volume page 0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @page_address: form and handle value used to get page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_raid_volume_pg0(struct mps_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 page_address)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
Mpi2RaidVolPage0_t *page = NULL;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
request->Header.PageNumber = 0;
request->Header.PageLength = mpi_reply->Header.PageLength;
request->Header.PageVersion = mpi_reply->Header.PageVersion;
request->PageAddress = page_address;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, cm->cm_length);
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}
/**
* mps_config_get_raid_volume_pg1 - obtain raid volume page 1
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: volume handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_raid_volume_pg1(struct mps_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u16 handle)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
Mpi2RaidVolPage1_t *page = NULL;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
request->Header.PageNumber = 1;
request->Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
request->Header.PageNumber = 1;
request->Header.PageLength = mpi_reply->Header.PageLength;
request->Header.PageVersion = mpi_reply->Header.PageVersion;
request->PageAddress = htole32(form | handle);
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length,
sizeof(Mpi2RaidVolPage1_t)));
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}
/**
* mps_config_get_volume_wwid - returns wwid given the volume handle
* @sc: per adapter object
* @volume_handle: volume handle
* @wwid: volume wwid
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_volume_wwid(struct mps_softc *sc, u16 volume_handle, u64 *wwid)
{
Mpi2ConfigReply_t mpi_reply;
Mpi2RaidVolPage1_t raid_vol_pg1;
*wwid = 0;
if (!(mps_config_get_raid_volume_pg1(sc, &mpi_reply, &raid_vol_pg1,
MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, volume_handle))) {
*wwid = le64toh((u64)raid_vol_pg1.WWID.High << 32 |
raid_vol_pg1.WWID.Low);
return 0;
} else
return -1;
}
/**
* mps_config_get_pd_pg0 - obtain raid phys disk page 0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @page_address: form and handle value used to get page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mps_config_get_raid_pd_pg0(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2RaidPhysDiskPage0_t *config_page, u32 page_address)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mps_command *cm;
Mpi2RaidPhysDiskPage0_t *page = NULL;
int error = 0;
u16 ioc_status;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mps_free_command(sc, cm);
if ((cm = mps_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
request->Header.PageNumber = 0;
request->Header.PageLength = mpi_reply->Header.PageLength;
request->Header.PageVersion = mpi_reply->Header.PageVersion;
request->PageAddress = page_address;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mps_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length,
sizeof(Mpi2RaidPhysDiskPage0_t)));
out:
free(page, M_MPT2);
if (cm)
mps_free_command(sc, cm);
return (error);
}