| Current Path : /sys/dev/mpt/mpilib/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/dev/mpt/mpilib/mpi_init.h |
/* $FreeBSD: release/9.1.0/sys/dev/mpt/mpilib/mpi_init.h 233740 2012-03-31 10:26:58Z marius $ */
/*-
* Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the name of the LSI Logic Corporation nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Name: mpi_init.h
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
* mpi_init.h Version: 01.05.09
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions.
* 11-02-00 01.01.01 Original release for post 1.0 work.
* 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT.
* 02-20-01 01.01.03 Started using MPI_POINTER.
* 03-27-01 01.01.04 Added structure offset comments.
* 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET.
* Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for
* MSG_SCSI_IO_REPLY.
* 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure
* Processor messages.
* 10-04-01 01.02.04 Added defines for SEP request Action field.
* 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define
* for SCSI IO requests.
* 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP.
* 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added MsgFlags defines for EEDP to SCSI IO request.
* Added new word to MSG_SCSI_IO_REPLY to add TaskTag field
* and a reserved U16.
* Added new MSG_SCSI_IO32_REQUEST structure.
* Added a TaskType of Clear Task Set to SCSI
* Task Management request.
* 12-07-04 01.05.02 Added support for Task Management Query Task.
* 01-15-05 01.05.03 Modified SCSI Enclosure Processor Request to support
* WWID addressing.
* 03-11-05 01.05.04 Removed EEDP flags from SCSI IO Request.
* Removed SCSI IO 32 Request.
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
* 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
* Added four new defines for SEP SlotStatus.
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
* 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
* 02-28-07 01.05.09 Defined two new MsgFlags bits for SCSI Task Management
* Request: Do Not Send Task IU and Soft Reset Option.
* --------------------------------------------------------------------------
*/
#ifndef MPI_INIT_H
#define MPI_INIT_H
/*****************************************************************************
*
* S C S I I n i t i a t o r M e s s a g e s
*
*****************************************************************************/
/****************************************************************************/
/* SCSI IO messages and associated structures */
/****************************************************************************/
typedef struct _MSG_SCSI_IO_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Control; /* 14h */
U8 CDB[16]; /* 18h */
U32 DataLength; /* 28h */
U32 SenseBufferLowAddr; /* 2Ch */
SGE_IO_UNION SGL; /* 30h */
} MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST,
SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t;
/* SCSI IO MsgFlags bits */
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01)
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00)
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02)
#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
/* SCSI IO LUN fields */
#define MPI_SCSIIO_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO_LUN_LEVEL_1_WORD (0xFF00)
#define MPI_SCSIIO_LUN_LEVEL_1_DWORD (0x0000FF00)
/* SCSI IO Control bits */
#define MPI_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
#define MPI_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
#define MPI_SCSIIO_CONTROL_WRITE (0x01000000)
#define MPI_SCSIIO_CONTROL_READ (0x02000000)
#define MPI_SCSIIO_CONTROL_ADDCDBLEN_MASK (0x3C000000)
#define MPI_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
#define MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
#define MPI_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
#define MPI_SCSIIO_CONTROL_HEADOFQ (0x00000100)
#define MPI_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
#define MPI_SCSIIO_CONTROL_ACAQ (0x00000400)
#define MPI_SCSIIO_CONTROL_UNTAGGED (0x00000500)
#define MPI_SCSIIO_CONTROL_NO_DISCONNECT (0x00000700)
#define MPI_SCSIIO_CONTROL_TASKMANAGE_MASK (0x00FF0000)
#define MPI_SCSIIO_CONTROL_OBSOLETE (0x00800000)
#define MPI_SCSIIO_CONTROL_CLEAR_ACA_RSV (0x00400000)
#define MPI_SCSIIO_CONTROL_TARGET_RESET (0x00200000)
#define MPI_SCSIIO_CONTROL_LUN_RESET_RSV (0x00100000)
#define MPI_SCSIIO_CONTROL_RESERVED (0x00080000)
#define MPI_SCSIIO_CONTROL_CLR_TASK_SET_RSV (0x00040000)
#define MPI_SCSIIO_CONTROL_ABORT_TASK_SET (0x00020000)
#define MPI_SCSIIO_CONTROL_RESERVED2 (0x00010000)
/* SCSI IO reply structure */
typedef struct _MSG_SCSI_IO_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 SCSIStatus; /* 0Ch */
U8 SCSIState; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TransferCount; /* 14h */
U32 SenseCount; /* 18h */
U32 ResponseInfo; /* 1Ch */
U16 TaskTag; /* 20h */
U16 Reserved1; /* 22h */
} MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY,
SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t;
/* SCSI IO Reply SCSIStatus values (SAM-2 status codes) */
#define MPI_SCSI_STATUS_SUCCESS (0x00)
#define MPI_SCSI_STATUS_CHECK_CONDITION (0x02)
#define MPI_SCSI_STATUS_CONDITION_MET (0x04)
#define MPI_SCSI_STATUS_BUSY (0x08)
#define MPI_SCSI_STATUS_INTERMEDIATE (0x10)
#define MPI_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
#define MPI_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
#define MPI_SCSI_STATUS_COMMAND_TERMINATED (0x22)
#define MPI_SCSI_STATUS_TASK_SET_FULL (0x28)
#define MPI_SCSI_STATUS_ACA_ACTIVE (0x30)
#define MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT (0x80)
#define MPI_SCSI_STATUS_FCPEXT_NO_LINK (0x81)
#define MPI_SCSI_STATUS_FCPEXT_UNASSIGNED (0x82)
/* SCSI IO Reply SCSIState values */
#define MPI_SCSI_STATE_AUTOSENSE_VALID (0x01)
#define MPI_SCSI_STATE_AUTOSENSE_FAILED (0x02)
#define MPI_SCSI_STATE_NO_SCSI_STATUS (0x04)
#define MPI_SCSI_STATE_TERMINATED (0x08)
#define MPI_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
#define MPI_SCSI_STATE_QUEUE_TAG_REJECTED (0x20)
/* SCSI IO Reply ResponseInfo values */
/* (FCP-1 RSP_CODE values and SPI-3 Packetized Failure codes) */
#define MPI_SCSI_RSP_INFO_FUNCTION_COMPLETE (0x00000000)
#define MPI_SCSI_RSP_INFO_FCP_BURST_LEN_ERROR (0x01000000)
#define MPI_SCSI_RSP_INFO_CMND_FIELDS_INVALID (0x02000000)
#define MPI_SCSI_RSP_INFO_FCP_DATA_RO_ERROR (0x03000000)
#define MPI_SCSI_RSP_INFO_TASK_MGMT_UNSUPPORTED (0x04000000)
#define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000)
#define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000)
#define MPI_SCSI_TASKTAG_UNKNOWN (0xFFFF)
/****************************************************************************/
/* SCSI IO 32 messages and associated structures */
/****************************************************************************/
typedef struct
{
U8 CDB[20]; /* 00h */
U32 PrimaryReferenceTag; /* 14h */
U16 PrimaryApplicationTag; /* 18h */
U16 PrimaryApplicationTagMask; /* 1Ah */
U32 TransferLength; /* 1Ch */
} MPI_SCSI_IO32_CDB_EEDP32, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP32,
MpiScsiIo32CdbEedp32_t, MPI_POINTER pMpiScsiIo32CdbEedp32_t;
typedef struct
{
U8 CDB[16]; /* 00h */
U32 DataLength; /* 10h */
U32 PrimaryReferenceTag; /* 14h */
U16 PrimaryApplicationTag; /* 18h */
U16 PrimaryApplicationTagMask; /* 1Ah */
U32 TransferLength; /* 1Ch */
} MPI_SCSI_IO32_CDB_EEDP16, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP16,
MpiScsiIo32CdbEedp16_t, MPI_POINTER pMpiScsiIo32CdbEedp16_t;
typedef union
{
U8 CDB32[32];
MPI_SCSI_IO32_CDB_EEDP32 EEDP32;
MPI_SCSI_IO32_CDB_EEDP16 EEDP16;
SGE_SIMPLE_UNION SGE;
} MPI_SCSI_IO32_CDB_UNION, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_UNION,
MpiScsiIo32Cdb_t, MPI_POINTER pMpiScsiIo32Cdb_t;
typedef struct
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U16 Reserved1; /* 02h */
U32 Reserved2; /* 04h */
} MPI_SCSI_IO32_BUS_TARGET_ID_FORM, MPI_POINTER PTR_MPI_SCSI_IO32_BUS_TARGET_ID_FORM,
MpiScsiIo32BusTargetIdForm_t, MPI_POINTER pMpiScsiIo32BusTargetIdForm_t;
typedef union
{
MPI_SCSI_IO32_BUS_TARGET_ID_FORM SCSIID;
U64 WWID;
} MPI_SCSI_IO32_ADDRESS, MPI_POINTER PTR_MPI_SCSI_IO32_ADDRESS,
MpiScsiIo32Address_t, MPI_POINTER pMpiScsiIo32Address_t;
typedef struct _MSG_SCSI_IO32_REQUEST
{
U8 Port; /* 00h */
U8 Reserved1; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Flags; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Control; /* 14h */
MPI_SCSI_IO32_CDB_UNION CDB; /* 18h */
U32 DataLength; /* 38h */
U32 BidirectionalDataLength; /* 3Ch */
U32 SecondaryReferenceTag; /* 40h */
U16 SecondaryApplicationTag; /* 44h */
U16 Reserved2; /* 46h */
U16 EEDPFlags; /* 48h */
U16 ApplicationTagTranslationMask; /* 4Ah */
U32 EEDPBlockSize; /* 4Ch */
MPI_SCSI_IO32_ADDRESS DeviceAddress; /* 50h */
U8 SGLOffset0; /* 58h */
U8 SGLOffset1; /* 59h */
U8 SGLOffset2; /* 5Ah */
U8 SGLOffset3; /* 5Bh */
U32 Reserved3; /* 5Ch */
U32 Reserved4; /* 60h */
U32 SenseBufferLowAddr; /* 64h */
SGE_IO_UNION SGL; /* 68h */
} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST,
SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t;
/* SCSI IO 32 MsgFlags bits */
#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH (0x01)
#define MPI_SCSIIO32_MSGFLGS_32_SENSE_WIDTH (0x00)
#define MPI_SCSIIO32_MSGFLGS_64_SENSE_WIDTH (0x01)
#define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION (0x02)
#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST (0x00)
#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_IOC (0x02)
#define MPI_SCSIIO32_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
#define MPI_SCSIIO32_MSGFLGS_SGL_OFFSETS_CHAINS (0x08)
#define MPI_SCSIIO32_MSGFLGS_MULTICAST (0x10)
#define MPI_SCSIIO32_MSGFLGS_BIDIRECTIONAL (0x20)
#define MPI_SCSIIO32_MSGFLGS_LARGE_CDB (0x40)
/* SCSI IO 32 Flags bits */
#define MPI_SCSIIO32_FLAGS_FORM_MASK (0x03)
#define MPI_SCSIIO32_FLAGS_FORM_SCSIID (0x00)
#define MPI_SCSIIO32_FLAGS_FORM_WWID (0x01)
/* SCSI IO 32 LUN fields */
#define MPI_SCSIIO32_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO32_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO32_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO32_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO32_LUN_LEVEL_1_WORD (0xFF00)
#define MPI_SCSIIO32_LUN_LEVEL_1_DWORD (0x0000FF00)
/* SCSI IO 32 Control bits */
#define MPI_SCSIIO32_CONTROL_DATADIRECTION_MASK (0x03000000)
#define MPI_SCSIIO32_CONTROL_NODATATRANSFER (0x00000000)
#define MPI_SCSIIO32_CONTROL_WRITE (0x01000000)
#define MPI_SCSIIO32_CONTROL_READ (0x02000000)
#define MPI_SCSIIO32_CONTROL_BIDIRECTIONAL (0x03000000)
#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_MASK (0xFC000000)
#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_SHIFT (26)
#define MPI_SCSIIO32_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
#define MPI_SCSIIO32_CONTROL_SIMPLEQ (0x00000000)
#define MPI_SCSIIO32_CONTROL_HEADOFQ (0x00000100)
#define MPI_SCSIIO32_CONTROL_ORDEREDQ (0x00000200)
#define MPI_SCSIIO32_CONTROL_ACAQ (0x00000400)
#define MPI_SCSIIO32_CONTROL_UNTAGGED (0x00000500)
#define MPI_SCSIIO32_CONTROL_NO_DISCONNECT (0x00000700)
#define MPI_SCSIIO32_CONTROL_TASKMANAGE_MASK (0x00FF0000)
#define MPI_SCSIIO32_CONTROL_OBSOLETE (0x00800000)
#define MPI_SCSIIO32_CONTROL_CLEAR_ACA_RSV (0x00400000)
#define MPI_SCSIIO32_CONTROL_TARGET_RESET (0x00200000)
#define MPI_SCSIIO32_CONTROL_LUN_RESET_RSV (0x00100000)
#define MPI_SCSIIO32_CONTROL_RESERVED (0x00080000)
#define MPI_SCSIIO32_CONTROL_CLR_TASK_SET_RSV (0x00040000)
#define MPI_SCSIIO32_CONTROL_ABORT_TASK_SET (0x00020000)
#define MPI_SCSIIO32_CONTROL_RESERVED2 (0x00010000)
/* SCSI IO 32 EEDPFlags */
#define MPI_SCSIIO32_EEDPFLAGS_MASK_OP (0x0007)
#define MPI_SCSIIO32_EEDPFLAGS_NOOP_OP (0x0000)
#define MPI_SCSIIO32_EEDPFLAGS_CHK_OP (0x0001)
#define MPI_SCSIIO32_EEDPFLAGS_STRIP_OP (0x0002)
#define MPI_SCSIIO32_EEDPFLAGS_CHKRM_OP (0x0003)
#define MPI_SCSIIO32_EEDPFLAGS_INSERT_OP (0x0004)
#define MPI_SCSIIO32_EEDPFLAGS_REPLACE_OP (0x0006)
#define MPI_SCSIIO32_EEDPFLAGS_CHKREGEN_OP (0x0007)
#define MPI_SCSIIO32_EEDPFLAGS_PASS_REF_TAG (0x0008)
#define MPI_SCSIIO32_EEDPFLAGS_8_9THS_MODE (0x0010)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_MASK (0x0700)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_GUARD (0x0100)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_REFTAG (0x0200)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_LBATAG (0x0400)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_SHIFT (8)
#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
/* SCSIIO32 IO reply structure */
typedef struct _MSG_SCSIIO32_IO_REPLY
{
U8 Port; /* 00h */
U8 Reserved1; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Flags; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 SCSIStatus; /* 0Ch */
U8 SCSIState; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TransferCount; /* 14h */
U32 SenseCount; /* 18h */
U32 ResponseInfo; /* 1Ch */
U16 TaskTag; /* 20h */
U16 Reserved2; /* 22h */
U32 BidirectionalTransferCount; /* 24h */
} MSG_SCSIIO32_IO_REPLY, MPI_POINTER PTR_MSG_SCSIIO32_IO_REPLY,
SCSIIO32Reply_t, MPI_POINTER pSCSIIO32Reply_t;
/****************************************************************************/
/* SCSI Task Management messages */
/****************************************************************************/
typedef struct _MSG_SCSI_TASK_MGMT
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 Reserved; /* 04h */
U8 TaskType; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Reserved2[7]; /* 14h */
U32 TaskMsgContext; /* 30h */
} MSG_SCSI_TASK_MGMT, MPI_POINTER PTR_SCSI_TASK_MGMT,
SCSITaskMgmt_t, MPI_POINTER pSCSITaskMgmt_t;
/* TaskType values */
#define MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
#define MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
#define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
#define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04)
#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
#define MPI_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
/* MsgFlags bits */
#define MPI_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
#define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION (0x02)
#define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04)
#define MPI_SCSITASKMGMT_MSGFLAGS_SOFT_RESET_OPTION (0x08)
/* SCSI Task Management Reply */
typedef struct _MSG_SCSI_TASK_MGMT_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 ResponseCode; /* 04h */
U8 TaskType; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Reserved2[2]; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TerminationCount; /* 14h */
} MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY,
SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t;
/* ResponseCode values */
#define MPI_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
#define MPI_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
#define MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
#define MPI_SCSITASKMGMT_RSP_TM_FAILED (0x05)
#define MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
#define MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
#define MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
/****************************************************************************/
/* SCSI Enclosure Processor messages */
/****************************************************************************/
typedef struct _MSG_SEP_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 Action; /* 04h */
U8 Flags; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 SlotStatus; /* 0Ch */
U32 Reserved2; /* 10h */
U32 Reserved3; /* 14h */
U32 Reserved4; /* 18h */
U16 Slot; /* 1Ch */
U16 EnclosureHandle; /* 1Eh */
} MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST,
SEPRequest_t, MPI_POINTER pSEPRequest_t;
/* Action defines */
#define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00)
#define MPI_SEP_REQ_ACTION_READ_STATUS (0x01)
/* Flags defines */
#define MPI_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
#define MPI_SEP_REQ_FLAGS_BUS_TARGETID_ADDRESS (0x00)
/* SlotStatus bits for MSG_SEP_REQUEST */
#define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
#define MPI_SEP_REQ_SLOTSTATUS_PARITY_CHECK (0x00000020)
#define MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
#define MPI_SEP_REQ_SLOTSTATUS_REQ_CONSISTENCY_CHECK (0x00001000)
#define MPI_SEP_REQ_SLOTSTATUS_DISABLE (0x00002000)
#define MPI_SEP_REQ_SLOTSTATUS_REQ_RESERVED_DEVICE (0x00004000)
#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000)
#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000)
#define MPI_SEP_REQ_SLOTSTATUS_ACTIVE (0x00800000)
#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000)
#define MPI_SEP_REQ_SLOTSTATUS_SWAP_RESET (0x80000000)
typedef struct _MSG_SEP_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 Action; /* 04h */
U8 Reserved1; /* 05h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 SlotStatus; /* 14h */
U32 Reserved4; /* 18h */
U16 Slot; /* 1Ch */
U16 EnclosureHandle; /* 1Eh */
} MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY,
SEPReply_t, MPI_POINTER pSEPReply_t;
/* SlotStatus bits for MSG_SEP_REPLY */
#define MPI_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
#define MPI_SEP_REPLY_SLOTSTATUS_PARITY_CHECK (0x00000020)
#define MPI_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
#define MPI_SEP_REPLY_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000)
#define MPI_SEP_REPLY_SLOTSTATUS_DISABLE (0x00002000)
#define MPI_SEP_REPLY_SLOTSTATUS_RESERVED_DEVICE (0x00004000)
#define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000)
#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000)
#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000)
#define MPI_SEP_REPLY_SLOTSTATUS_ACTIVE (0x00800000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000)
#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
#define MPI_SEP_REPLY_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x10000000)
#define MPI_SEP_REPLY_SLOTSTATUS_FAULT_SENSED (0x40000000)
#define MPI_SEP_REPLY_SLOTSTATUS_SWAPPED (0x80000000)
#endif