Current Path : /sys/dev/vxge/vxgehal/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/dev/vxge/vxgehal/vxgehal-fifo.h |
/*- * Copyright(c) 2002-2011 Exar Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification are permitted provided the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * 3. Neither the name of the Exar Corporation nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*$FreeBSD: release/9.1.0/sys/dev/vxge/vxgehal/vxgehal-fifo.h 221167 2011-04-28 14:33:15Z gnn $*/ #ifndef VXGE_HAL_FIFO_H #define VXGE_HAL_FIFO_H __EXTERN_BEGIN_DECLS /* * struct __hal_fifo_t - Fifo. * @channel: Channel "base" of this fifo, the common part of all HAL * channels. * @mempool: Memory pool, from which descriptors get allocated. * @config: Fifo configuration, part of device configuration * (see vxge_hal_device_config_t {}). * @interrupt_type: Interrupt type to be used * @no_snoop_bits: See vxge_hal_fifo_config_t {}. * @memblock_size: Fifo descriptors are allocated in blocks of @mem_block_size * bytes. Setting @memblock_size to page size ensures * by-page allocation of descriptors. 128K bytes is the * maximum supported block size. * @txdl_per_memblock: Number of TxDLs (TxD lists) per memblock. * on TxDL please refer to X3100 UG. * @txdl_size: Configured TxDL size (i.e., number of TxDs in a list), plus * per-TxDL HAL private space (__hal_fifo_txdl_priv_t). * @txdl_priv_size: Per-TxDL space reserved for HAL and ULD * @per_txdl_space: Per txdl private space for the ULD * @txdlblock_priv_size: Total private space per TXDL memory block * @align_size: Cache alignment size * @callback: Fifo completion callback. HAL invokes the callback when there * are new completions on that fifo. In many implementations * the @callback executes in the hw interrupt context. * @txdl_init: Fifo's descriptor-initialize callback. * See vxge_hal_fifo_txdl_init_f {}. * If not NULL, HAL invokes the callback when opening * the fifo via vxge_hal_vpath_open(). * @txdl_term: Fifo's descriptor-terminate callback. If not NULL, * HAL invokes the callback when closing the corresponding fifo. * See also vxge_hal_fifo_txdl_term_f {}. * @stats: Statistics of this fifo * * Fifo channel. * Note: The structure is cache line aligned. */ typedef struct __hal_fifo_t { __hal_channel_t channel; vxge_hal_mempool_t *mempool; vxge_hal_fifo_config_t *config; u64 interrupt_type; u32 no_snoop_bits; u32 memblock_size; u32 txdl_per_memblock; u32 txdl_size; u32 txdl_priv_size; u32 per_txdl_space; u32 txdlblock_priv_size; u32 align_size; vxge_hal_fifo_callback_f callback; vxge_hal_fifo_txdl_init_f txdl_init; vxge_hal_fifo_txdl_term_f txdl_term; vxge_hal_vpath_stats_sw_fifo_info_t *stats; } __vxge_os_attr_cacheline_aligned __hal_fifo_t; /* * struct __hal_fifo_txdl_priv_t - Transmit descriptor HAL-private data. * @dma_addr: DMA (mapped) address of _this_ descriptor. * @dma_handle: DMA handle used to map the descriptor onto device. * @dma_offset: Descriptor's offset in the memory block. HAL allocates * descriptors in memory blocks (see vxge_hal_fifo_config_t {}) * Each memblock is a contiguous block of DMA-able memory. * @frags: Total number of fragments (that is, contiguous data buffers) * carried by this TxDL. * @align_vaddr_start: Aligned virtual address start * @align_vaddr: Virtual address of the per-TxDL area in memory used for * alignement. Used to place one or more mis-aligned fragments * (the maximum defined by configration variable * @max_aligned_frags). * @align_dma_addr: DMA address translated from the @align_vaddr. * @align_dma_handle: DMA handle that corresponds to @align_dma_addr. * @align_dma_acch: DMA access handle corresponds to @align_dma_addr. * @align_dma_offset: The current offset into the @align_vaddr area. * Grows while filling the descriptor, gets reset. * @align_used_frags: Number of fragments used. * @alloc_frags: Total number of fragments allocated. * @dang_frags: Number of fragments kept from release until this TxDL is freed. * @bytes_sent: * @unused: * @dang_txdl: * @next_txdl_priv: * @first_txdp: * @dang_txdlh: Pointer to TxDL (list) kept from release until this TxDL * is freed. * @linked_txdl_priv: Pointer to any linked TxDL for creating contiguous * TxDL list. * @txdlh: Corresponding txdlh to this TxDL. * @memblock: Pointer to the TxDL memory block or memory page. * on the next send operation. * @dma_object: DMA address and handle of the memory block that contains * the descriptor. This member is used only in the "checked" * version of the HAL (to enforce certain assertions); * otherwise it gets compiled out. * @allocated: True if the descriptor is reserved, 0 otherwise. Internal usage. * * Per-transmit decsriptor HAL-private data. HAL uses the space to keep DMA * information associated with the descriptor. Note that ULD can ask HAL * to allocate additional per-descriptor space for its own (ULD-specific) * purposes. * * See also: vxge_hal_ring_rxd_priv_t {}. */ typedef struct __hal_fifo_txdl_priv_t { dma_addr_t dma_addr; pci_dma_h dma_handle; ptrdiff_t dma_offset; u32 frags; u8 *align_vaddr_start; u8 *align_vaddr; dma_addr_t align_dma_addr; pci_dma_h align_dma_handle; pci_dma_acc_h align_dma_acch; ptrdiff_t align_dma_offset; u32 align_used_frags; u32 alloc_frags; u32 dang_frags; u32 bytes_sent; u32 unused; vxge_hal_fifo_txd_t *dang_txdl; struct __hal_fifo_txdl_priv_t *next_txdl_priv; vxge_hal_fifo_txd_t *first_txdp; void *memblock; #if defined(VXGE_DEBUG_ASSERT) vxge_hal_mempool_dma_t *dma_object; #endif #if defined(VXGE_OS_MEMORY_CHECK) u32 allocated; #endif } __hal_fifo_txdl_priv_t; #define VXGE_HAL_FIFO_ULD_PRIV(fifo, txdh) \ fifo->channel.dtr_arr[ \ ((vxge_hal_fifo_txd_t *)(txdh))->host_control].uld_priv #define VXGE_HAL_FIFO_HAL_PRIV(fifo, txdh) \ ((__hal_fifo_txdl_priv_t *)(fifo->channel.dtr_arr[ \ ((vxge_hal_fifo_txd_t *)(txdh))->host_control].hal_priv)) #define VXGE_HAL_FIFO_MAX_FRAG_CNT(fifo) fifo->config->max_frags #define VXGE_HAL_FIFO_TXDL_INDEX(txdp) \ (u32)((vxge_hal_fifo_txd_t *)txdp)->host_control /* ========================= FIFO PRIVATE API ============================= */ vxge_hal_status_e __hal_fifo_create( vxge_hal_vpath_h vpath_handle, vxge_hal_fifo_attr_t *attr); void __hal_fifo_abort( vxge_hal_fifo_h fifoh, vxge_hal_reopen_e reopen); vxge_hal_status_e __hal_fifo_reset( vxge_hal_fifo_h ringh); void __hal_fifo_delete( vxge_hal_vpath_h vpath_handle); void __hal_fifo_txdl_free_many( __hal_fifo_t *fifo, vxge_hal_fifo_txd_t *txdp, u32 list_size, u32 frags); #if defined(VXGE_HAL_ALIGN_XMIT) void __hal_fifo_txdl_align_free_unmap( __hal_fifo_t *fifo, vxge_hal_fifo_txd_t *txdp); vxge_hal_status_e __hal_fifo_txdl_align_alloc_map( __hal_fifo_t *fifo, vxge_hal_fifo_txd_t *txdp); #endif __EXTERN_END_DECLS #endif /* VXGE_HAL_FIFO_H */