config root man

Current Path : /sys/i386/include/

FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64
Upload File :
Current File : //sys/i386/include/reg.h

/*-
 * Copyright (c) 1990 The Regents of the University of California.
 * All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * William Jolitz.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	from: @(#)reg.h	5.5 (Berkeley) 1/18/91
 * $FreeBSD: release/9.1.0/sys/i386/include/reg.h 218744 2011-02-16 17:50:21Z dchagin $
 */

#ifndef _MACHINE_REG_H_
#define	_MACHINE_REG_H_

/*
 * Indices for registers in `struct trapframe' and `struct regs'.
 *
 * This interface is deprecated.  In the kernel, it is only used in FPU
 * emulators to convert from register numbers encoded in instructions to
 * register values.  Everything else just accesses the relevant struct
 * members.  In userland, debuggers tend to abuse this interface since
 * they don't understand that `struct regs' is a struct.  I hope they have
 * stopped accessing the registers in the trap frame via PT_{READ,WRITE}_U
 * and we can stop supporting the user area soon.
 */
#define	tFS	(0)
#define	tES	(1)
#define	tDS	(2)
#define	tEDI	(3)
#define	tESI	(4)
#define	tEBP	(5)
#define	tISP	(6)
#define	tEBX	(7)
#define	tEDX	(8)
#define	tECX	(9)
#define	tEAX	(10)
#define	tERR	(12)
#define	tEIP	(13)
#define	tCS	(14)
#define	tEFLAGS	(15)
#define	tESP	(16)
#define	tSS	(17)

/*
 * Indices for registers in `struct regs' only.
 *
 * Some registers live in the pcb and are only in an "array" with the
 * other registers in application interfaces that copy all the registers
 * to or from a `struct regs'.
 */
#define	tGS	(18)

/*
 * Register set accessible via /proc/$pid/regs and PT_{SET,GET}REGS.
 */
struct reg {
	unsigned int	r_fs;
	unsigned int	r_es;
	unsigned int	r_ds;
	unsigned int	r_edi;
	unsigned int	r_esi;
	unsigned int	r_ebp;
	unsigned int	r_isp;
	unsigned int	r_ebx;
	unsigned int	r_edx;
	unsigned int	r_ecx;
	unsigned int	r_eax;
	unsigned int	r_trapno;
	unsigned int	r_err;
	unsigned int	r_eip;
	unsigned int	r_cs;
	unsigned int	r_eflags;
	unsigned int	r_esp;
	unsigned int	r_ss;
	unsigned int	r_gs;
};

/*
 * Register set accessible via /proc/$pid/fpregs.
 */
struct fpreg {
	/*
	 * XXX should get struct from npx.h.  Here we give a slightly
	 * simplified struct.  This may be too much detail.  Perhaps
	 * an array of unsigned longs is best.
	 */
	unsigned long	fpr_env[7];
	unsigned char	fpr_acc[8][10];
	unsigned long	fpr_ex_sw;
	unsigned char	fpr_pad[64];
};

struct xmmreg {
	/*
	 * XXX should get struct from npx.h.  Here we give a slightly
	 * simplified struct.  This may be too much detail.  Perhaps
	 * an array of unsigned longs is best.
	 */
	unsigned long	xmm_env[8];
	unsigned char	xmm_acc[8][16];
	unsigned char	xmm_reg[8][16];
	unsigned char	xmm_pad[224];
};

/*
 * Register set accessible via /proc/$pid/dbregs.
 */
struct dbreg {
	unsigned int  dr[8];	/* debug registers */
				/* Index 0-3: debug address registers */
				/* Index 4-5: reserved */
				/* Index 6: debug status */
				/* Index 7: debug control */
};

#define	DBREG_DR7_LOCAL_ENABLE	0x01
#define	DBREG_DR7_GLOBAL_ENABLE	0x02
#define	DBREG_DR7_LEN_1		0x00	/* 1 byte length          */
#define	DBREG_DR7_LEN_2		0x01
#define	DBREG_DR7_LEN_4		0x03
#define	DBREG_DR7_EXEC		0x00	/* break on execute       */
#define	DBREG_DR7_WRONLY	0x01	/* break on write         */
#define	DBREG_DR7_RDWR		0x03	/* break on read or write */
#define	DBREG_DR7_MASK(i)	(0xf << ((i) * 4 + 16) | 0x3 << (i) * 2)
#define	DBREG_DR7_SET(i, len, access, enable)				\
	(((len) << 2 | (access)) << ((i) * 4 + 16) | (enable) << (i) * 2)
#define	DBREG_DR7_GD		0x2000
#define	DBREG_DR7_ENABLED(d, i)	(((d) & 0x3 << (i) * 2) != 0)
#define	DBREG_DR7_ACCESS(d, i)	((d) >> ((i) * 4 + 16) & 0x3)
#define	DBREG_DR7_LEN(d, i)	((d) >> ((i) * 4 + 18) & 0x3)

#define	DBREG_DRX(d,x)	((d)->dr[(x)])	/* reference dr0 - dr7 by
					   register number */

#ifdef _KERNEL
/*
 * XXX these interfaces are MI, so they should be declared in a MI place.
 */
int	fill_regs(struct thread *, struct reg *);
int	fill_frame_regs(struct trapframe *, struct reg *);
int	set_regs(struct thread *, struct reg *);
int	fill_fpregs(struct thread *, struct fpreg *);
int	set_fpregs(struct thread *, struct fpreg *);
int	fill_dbregs(struct thread *, struct dbreg *);
int	set_dbregs(struct thread *, struct dbreg *);
#endif

#endif /* !_MACHINE_REG_H_ */

Man Man