config root man

#
# $FreeBSD: release/9.1.0/sys/mips/conf/SENTRY5 221753 2011-05-11 00:52:41Z gonzo $
#
# The Broadcom Sentry5 series of processors and boards is very commonly
# used in COTS hardware including the Netgear WGT634U.
#
# Some tweaks are needed for use with this platform:
#
# * CFE firmware's ELF loader expects an ELF kernel which is linked so as
#   not to contain offsets in PT_LOAD which point behind the actual offset
#   of that PT header. FreeBSD normally links the first PT_LOAD header to
#   begin at offset 0.
#
# * Broadcom's support package for the internal bus, the Sonics
#   SiliconBackplane, needs to be integrated to detect and probe hardware
#   correctly.
#
# * The clock needs to be calibrated correctly, so that DELAY() may work.
#   One problem with this is that the low-level printf() routine calls DELAY(),
#   which currently causes divide-by-zero trap
#
# * The Broadcom CPUs have no FPU. Attempting to detect one by reading CP1's
#   status register causes an unhandled boot-time exception. An FPU emulator
#   will be necessary to support multi-user boot.
#

ident		SENTRY5

# XXX only siba should be hardwired for now; we will use
# bus enumeration there
hints		"SENTRY5.hints"
include		"../sentry5/std.sentry5"

# sentry5 normally ships with cfe firmware; use the console for now
options		CFE
options		CFE_CONSOLE
options		ALT_BREAK_TO_DEBUGGER

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
makeoptions	MODULES_OVERRIDE=""

options		DDB
options		KDB

options		SCHED_4BSD		#4BSD scheduler
options		INET			#InterNETworking
options		NFSCL			#Network Filesystem Client
options		NFS_ROOT		#NFS usable as /, requires NFSCL
options		PSEUDOFS		#Pseudo-filesystem framework
options		_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions

# Debugging for use in -current
#options 	DEADLKRES
options		INVARIANTS
options		INVARIANT_SUPPORT

#options 	BUS_DEBUG
#makeoptions	BUS_DEBUG

device		siba			# Sonics SiliconBackplane
device		pci			# siba_pcib

# device 	bfe			# XXX will build both pci and siba
# device 	miibus			# attachments

# pci devices
# notyet:
#device		ath			# in pci slot
#device		ath_pci			# Atheros pci/cardbus glue
#device		ath_hal			# pci chip support
#options		AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors

options 	USB_DEBUG		# enable debug msgs
device		usb			# USB Bus (required)
device		uhci			# UHCI PCI->USB interface
device		ehci			# EHCI PCI->USB interface (USB 2.0)

# need to teach the code to ignore the bridge....


# XXX notyet; need to be auto probed children of siba_cc.
#device		uart

device		loop
device		ether
device		md