| Current Path : /usr/include/lzma/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/include/lzma/container.h |
/** * \file lzma/container.h * \brief File formats */ /* * Author: Lasse Collin * * This file has been put into the public domain. * You can do whatever you want with this file. * * See ../lzma.h for information about liblzma as a whole. */ #ifndef LZMA_H_INTERNAL # error Never include this file directly. Use <lzma.h> instead. #endif /************ * Encoding * ************/ /** * \brief Default compression preset * * It's not straightforward to recommend a default preset, because in some * cases keeping the resource usage relatively low is more important that * getting the maximum compression ratio. */ #define LZMA_PRESET_DEFAULT UINT32_C(6) /** * \brief Mask for preset level * * This is useful only if you need to extract the level from the preset * variable. That should be rare. */ #define LZMA_PRESET_LEVEL_MASK UINT32_C(0x1F) /* * Preset flags * * Currently only one flag is defined. */ /** * \brief Extreme compression preset * * This flag modifies the preset to make the encoding significantly slower * while improving the compression ratio only marginally. This is useful * when you don't mind wasting time to get as small result as possible. * * This flag doesn't affect the memory usage requirements of the decoder (at * least not significantly). The memory usage of the encoder may be increased * a little but only at the lowest preset levels (0-3). */ #define LZMA_PRESET_EXTREME (UINT32_C(1) << 31) /** * \brief Calculate approximate memory usage of easy encoder * * This function is a wrapper for lzma_raw_encoder_memusage(). * * \param preset Compression preset (level and possible flags) * * \return Number of bytes of memory required for the given * preset when encoding. If an error occurs, for example * due to unsupported preset, UINT64_MAX is returned. */ extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset) lzma_nothrow lzma_attr_pure; /** * \brief Calculate approximate decoder memory usage of a preset * * This function is a wrapper for lzma_raw_decoder_memusage(). * * \param preset Compression preset (level and possible flags) * * \return Number of bytes of memory required to decompress a file * that was compressed using the given preset. If an error * occurs, for example due to unsupported preset, UINT64_MAX * is returned. */ extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset) lzma_nothrow lzma_attr_pure; /** * \brief Initialize .xz Stream encoder using a preset number * * This function is intended for those who just want to use the basic features * if liblzma (that is, most developers out there). * * \param strm Pointer to lzma_stream that is at least initialized * with LZMA_STREAM_INIT. * \param preset Compression preset to use. A preset consist of level * number and zero or more flags. Usually flags aren't * used, so preset is simply a number [0, 9] which match * the options -0 ... -9 of the xz command line tool. * Additional flags can be be set using bitwise-or with * the preset level number, e.g. 6 | LZMA_PRESET_EXTREME. * \param check Integrity check type to use. See check.h for available * checks. The xz command line tool defaults to * LZMA_CHECK_CRC64, which is a good choice if you are * unsure. LZMA_CHECK_CRC32 is good too as long as the * uncompressed file is not many gigabytes. * * \return - LZMA_OK: Initialization succeeded. Use lzma_code() to * encode your data. * - LZMA_MEM_ERROR: Memory allocation failed. * - LZMA_OPTIONS_ERROR: The given compression preset is not * supported by this build of liblzma. * - LZMA_UNSUPPORTED_CHECK: The given check type is not * supported by this liblzma build. * - LZMA_PROG_ERROR: One or more of the parameters have values * that will never be valid. For example, strm == NULL. * * If initialization fails (return value is not LZMA_OK), all the memory * allocated for *strm by liblzma is always freed. Thus, there is no need * to call lzma_end() after failed initialization. * * If initialization succeeds, use lzma_code() to do the actual encoding. * Valid values for `action' (the second argument of lzma_code()) are * LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future, * there may be compression levels or flags that don't support LZMA_SYNC_FLUSH. */ extern LZMA_API(lzma_ret) lzma_easy_encoder( lzma_stream *strm, uint32_t preset, lzma_check check) lzma_nothrow lzma_attr_warn_unused_result; /** * \brief Single-call .xz Stream encoding using a preset number * * The maximum required output buffer size can be calculated with * lzma_stream_buffer_bound(). * * \param preset Compression preset to use. See the description * in lzma_easy_encoder(). * \param check Type of the integrity check to calculate from * uncompressed data. * \param allocator lzma_allocator for custom allocator functions. * Set to NULL to use malloc() and free(). * \param in Beginning of the input buffer * \param in_size Size of the input buffer * \param out Beginning of the output buffer * \param out_pos The next byte will be written to out[*out_pos]. * *out_pos is updated only if encoding succeeds. * \param out_size Size of the out buffer; the first byte into * which no data is written to is out[out_size]. * * \return - LZMA_OK: Encoding was successful. * - LZMA_BUF_ERROR: Not enough output buffer space. * - LZMA_UNSUPPORTED_CHECK * - LZMA_OPTIONS_ERROR * - LZMA_MEM_ERROR * - LZMA_DATA_ERROR * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_easy_buffer_encode( uint32_t preset, lzma_check check, lzma_allocator *allocator, const uint8_t *in, size_t in_size, uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow; /** * \brief Initialize .xz Stream encoder using a custom filter chain * * \param strm Pointer to properly prepared lzma_stream * \param filters Array of filters. This must be terminated with * filters[n].id = LZMA_VLI_UNKNOWN. See filter.h for * more information. * \param check Type of the integrity check to calculate from * uncompressed data. * * \return - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR * - LZMA_UNSUPPORTED_CHECK * - LZMA_OPTIONS_ERROR * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_stream_encoder(lzma_stream *strm, const lzma_filter *filters, lzma_check check) lzma_nothrow lzma_attr_warn_unused_result; /** * \brief Initialize .lzma encoder (legacy file format) * * The .lzma format is sometimes called the LZMA_Alone format, which is the * reason for the name of this function. The .lzma format supports only the * LZMA1 filter. There is no support for integrity checks like CRC32. * * Use this function if and only if you need to create files readable by * legacy LZMA tools such as LZMA Utils 4.32.x. Moving to the .xz format * is strongly recommended. * * The valid action values for lzma_code() are LZMA_RUN and LZMA_FINISH. * No kind of flushing is supported, because the file format doesn't make * it possible. * * \return - LZMA_OK * - LZMA_MEM_ERROR * - LZMA_OPTIONS_ERROR * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_alone_encoder( lzma_stream *strm, const lzma_options_lzma *options) lzma_nothrow lzma_attr_warn_unused_result; /** * \brief Calculate output buffer size for single-call Stream encoder * * When trying to compress uncompressible data, the encoded size will be * slightly bigger than the input data. This function calculates how much * output buffer space is required to be sure that lzma_stream_buffer_encode() * doesn't return LZMA_BUF_ERROR. * * The calculated value is not exact, but it is guaranteed to be big enough. * The actual maximum output space required may be slightly smaller (up to * about 100 bytes). This should not be a problem in practice. * * If the calculated maximum size doesn't fit into size_t or would make the * Stream grow past LZMA_VLI_MAX (which should never happen in practice), * zero is returned to indicate the error. * * \note The limit calculated by this function applies only to * single-call encoding. Multi-call encoding may (and probably * will) have larger maximum expansion when encoding * uncompressible data. Currently there is no function to * calculate the maximum expansion of multi-call encoding. */ extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size) lzma_nothrow; /** * \brief Single-call .xz Stream encoder * * \param filters Array of filters. This must be terminated with * filters[n].id = LZMA_VLI_UNKNOWN. See filter.h * for more information. * \param check Type of the integrity check to calculate from * uncompressed data. * \param allocator lzma_allocator for custom allocator functions. * Set to NULL to use malloc() and free(). * \param in Beginning of the input buffer * \param in_size Size of the input buffer * \param out Beginning of the output buffer * \param out_pos The next byte will be written to out[*out_pos]. * *out_pos is updated only if encoding succeeds. * \param out_size Size of the out buffer; the first byte into * which no data is written to is out[out_size]. * * \return - LZMA_OK: Encoding was successful. * - LZMA_BUF_ERROR: Not enough output buffer space. * - LZMA_UNSUPPORTED_CHECK * - LZMA_OPTIONS_ERROR * - LZMA_MEM_ERROR * - LZMA_DATA_ERROR * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_stream_buffer_encode( lzma_filter *filters, lzma_check check, lzma_allocator *allocator, const uint8_t *in, size_t in_size, uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow lzma_attr_warn_unused_result; /************ * Decoding * ************/ /** * This flag makes lzma_code() return LZMA_NO_CHECK if the input stream * being decoded has no integrity check. Note that when used with * lzma_auto_decoder(), all .lzma files will trigger LZMA_NO_CHECK * if LZMA_TELL_NO_CHECK is used. */ #define LZMA_TELL_NO_CHECK UINT32_C(0x01) /** * This flag makes lzma_code() return LZMA_UNSUPPORTED_CHECK if the input * stream has an integrity check, but the type of the integrity check is not * supported by this liblzma version or build. Such files can still be * decoded, but the integrity check cannot be verified. */ #define LZMA_TELL_UNSUPPORTED_CHECK UINT32_C(0x02) /** * This flag makes lzma_code() return LZMA_GET_CHECK as soon as the type * of the integrity check is known. The type can then be got with * lzma_get_check(). */ #define LZMA_TELL_ANY_CHECK UINT32_C(0x04) /** * This flag enables decoding of concatenated files with file formats that * allow concatenating compressed files as is. From the formats currently * supported by liblzma, only the .xz format allows concatenated files. * Concatenated files are not allowed with the legacy .lzma format. * * This flag also affects the usage of the `action' argument for lzma_code(). * When LZMA_CONCATENATED is used, lzma_code() won't return LZMA_STREAM_END * unless LZMA_FINISH is used as `action'. Thus, the application has to set * LZMA_FINISH in the same way as it does when encoding. * * If LZMA_CONCATENATED is not used, the decoders still accept LZMA_FINISH * as `action' for lzma_code(), but the usage of LZMA_FINISH isn't required. */ #define LZMA_CONCATENATED UINT32_C(0x08) /** * \brief Initialize .xz Stream decoder * * \param strm Pointer to properly prepared lzma_stream * \param memlimit Memory usage limit as bytes. Use UINT64_MAX * to effectively disable the limiter. * \param flags Bitwise-or of zero or more of the decoder flags: * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, * LZMA_TELL_ANY_CHECK, LZMA_CONCATENATED * * \return - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR: Cannot allocate memory. * - LZMA_OPTIONS_ERROR: Unsupported flags * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_stream_decoder( lzma_stream *strm, uint64_t memlimit, uint32_t flags) lzma_nothrow lzma_attr_warn_unused_result; /** * \brief Decode .xz Streams and .lzma files with autodetection * * This decoder autodetects between the .xz and .lzma file formats, and * calls lzma_stream_decoder() or lzma_alone_decoder() once the type * of the input file has been detected. * * \param strm Pointer to properly prepared lzma_stream * \param memlimit Memory usage limit as bytes. Use UINT64_MAX * to effectively disable the limiter. * \param flags Bitwise-or of flags, or zero for no flags. * * \return - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR: Cannot allocate memory. * - LZMA_OPTIONS_ERROR: Unsupported flags * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_auto_decoder( lzma_stream *strm, uint64_t memlimit, uint32_t flags) lzma_nothrow lzma_attr_warn_unused_result; /** * \brief Initialize .lzma decoder (legacy file format) * * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH. * There is no need to use LZMA_FINISH, but allowing it may simplify * certain types of applications. * * \return - LZMA_OK * - LZMA_MEM_ERROR * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_alone_decoder( lzma_stream *strm, uint64_t memlimit) lzma_nothrow lzma_attr_warn_unused_result; /** * \brief Single-call .xz Stream decoder * * \param memlimit Pointer to how much memory the decoder is allowed * to allocate. The value pointed by this pointer is * modified if and only if LZMA_MEMLIMIT_ERROR is * returned. * \param flags Bitwise-or of zero or more of the decoder flags: * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, * LZMA_CONCATENATED. Note that LZMA_TELL_ANY_CHECK * is not allowed and will return LZMA_PROG_ERROR. * \param allocator lzma_allocator for custom allocator functions. * Set to NULL to use malloc() and free(). * \param in Beginning of the input buffer * \param in_pos The next byte will be read from in[*in_pos]. * *in_pos is updated only if decoding succeeds. * \param in_size Size of the input buffer; the first byte that * won't be read is in[in_size]. * \param out Beginning of the output buffer * \param out_pos The next byte will be written to out[*out_pos]. * *out_pos is updated only if decoding succeeds. * \param out_size Size of the out buffer; the first byte into * which no data is written to is out[out_size]. * * \return - LZMA_OK: Decoding was successful. * - LZMA_FORMAT_ERROR * - LZMA_OPTIONS_ERROR * - LZMA_DATA_ERROR * - LZMA_NO_CHECK: This can be returned only if using * the LZMA_TELL_NO_CHECK flag. * - LZMA_UNSUPPORTED_CHECK: This can be returned only if using * the LZMA_TELL_UNSUPPORTED_CHECK flag. * - LZMA_MEM_ERROR * - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached. * The minimum required memlimit value was stored to *memlimit. * - LZMA_BUF_ERROR: Output buffer was too small. * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_stream_buffer_decode( uint64_t *memlimit, uint32_t flags, lzma_allocator *allocator, const uint8_t *in, size_t *in_pos, size_t in_size, uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow lzma_attr_warn_unused_result;