| Current Path : /usr/local/info/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/local/info/m4.info |
This is ./m4.info, produced by makeinfo version 4.8 from ./m4.texinfo.
This manual (26 November 2013) is for GNU M4 (version 1.4.12), a
package containing an implementation of the m4 macro language.
Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 2004, 2005, 2006,
2007, 2008 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts, and
no Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License."
INFO-DIR-SECTION Text creation and manipulation
START-INFO-DIR-ENTRY
* GM4: (m4). A powerful macro processor.
END-INFO-DIR-ENTRY
File: m4.info, Node: Top, Next: Preliminaries, Up: (dir)
GNU M4
******
This manual (26 November 2013) is for GNU M4 (version 1.4.12), a
package containing an implementation of the m4 macro language.
Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 2004, 2005, 2006,
2007, 2008 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts, and
no Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License."
GNU `m4' is an implementation of the traditional UNIX macro
processor. It is mostly SVR4 compatible, although it has some
extensions (for example, handling more than 9 positional parameters to
macros). `m4' also has builtin functions for including files, running
shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for
generating `configure' scripts, but not for running them.
GNU `m4' was originally written by Rene' Seindal, with subsequent
changes by Franc,ois Pinard and other volunteers on the Internet. All
names and email addresses can be found in the files `m4-1.4.12/AUTHORS'
and `m4-1.4.12/THANKS' from the GNU M4 distribution.
This is release 1.4.12. It is now considered stable: future
releases in the 1.4.x series are only meant to fix bugs, increase speed,
or improve documentation. However...
An experimental feature, which would improve `m4' usefulness, allows
for changing the syntax for what is a "word" in `m4'. You should use:
./configure --enable-changeword
if you want this feature compiled in. The current implementation
slows down `m4' considerably and is hardly acceptable. In the future,
`m4' 2.0 will come with a different set of new features that provide
similar capabilities, but without the inefficiencies, so changeword
will go away and _you should not count on it_.
* Menu:
* Preliminaries:: Introduction and preliminaries
* Invoking m4:: Invoking `m4'
* Syntax:: Lexical and syntactic conventions
* Macros:: How to invoke macros
* Definitions:: How to define new macros
* Conditionals:: Conditionals, loops, and recursion
* Debugging:: How to debug macros and input
* Input Control:: Input control
* File Inclusion:: File inclusion
* Diversions:: Diverting and undiverting output
* Text handling:: Macros for text handling
* Arithmetic:: Macros for doing arithmetic
* Shell commands:: Macros for running shell commands
* Miscellaneous:: Miscellaneous builtin macros
* Frozen files:: Fast loading of frozen state
* Compatibility:: Compatibility with other versions of `m4'
* Answers:: Correct version of some examples
* Copying This Package:: How to make copies of the overall M4 package
* Copying This Manual:: How to make copies of this manual
* Indices:: Indices of concepts and macros
--- The Detailed Node Listing ---
Introduction and preliminaries
* Intro:: Introduction to `m4'
* History:: Historical references
* Bugs:: Problems and bugs
* Manual:: Using this manual
Invoking `m4'
* Operation modes:: Command line options for operation modes
* Preprocessor features:: Command line options for preprocessor features
* Limits control:: Command line options for limits control
* Frozen state:: Command line options for frozen state
* Debugging options:: Command line options for debugging
* Command line files:: Specifying input files on the command line
Lexical and syntactic conventions
* Names:: Macro names
* Quoted strings:: Quoting input to `m4'
* Comments:: Comments in `m4' input
* Other tokens:: Other kinds of input tokens
* Input processing:: How `m4' copies input to output
How to invoke macros
* Invocation:: Macro invocation
* Inhibiting Invocation:: Preventing macro invocation
* Macro Arguments:: Macro arguments
* Quoting Arguments:: On Quoting Arguments to macros
* Macro expansion:: Expanding macros
How to define new macros
* Define:: Defining a new macro
* Arguments:: Arguments to macros
* Pseudo Arguments:: Special arguments to macros
* Undefine:: Deleting a macro
* Defn:: Renaming macros
* Pushdef:: Temporarily redefining macros
* Indir:: Indirect call of macros
* Builtin:: Indirect call of builtins
Conditionals, loops, and recursion
* Ifdef:: Testing if a macro is defined
* Ifelse:: If-else construct, or multibranch
* Shift:: Recursion in `m4'
* Forloop:: Iteration by counting
* Foreach:: Iteration by list contents
How to debug macros and input
* Dumpdef:: Displaying macro definitions
* Trace:: Tracing macro calls
* Debug Levels:: Controlling debugging output
* Debug Output:: Saving debugging output
Input control
* Dnl:: Deleting whitespace in input
* Changequote:: Changing the quote characters
* Changecom:: Changing the comment delimiters
* Changeword:: Changing the lexical structure of words
* M4wrap:: Saving text until end of input
File inclusion
* Include:: Including named files
* Search Path:: Searching for include files
Diverting and undiverting output
* Divert:: Diverting output
* Undivert:: Undiverting output
* Divnum:: Diversion numbers
* Cleardivert:: Discarding diverted text
Macros for text handling
* Len:: Calculating length of strings
* Index macro:: Searching for substrings
* Regexp:: Searching for regular expressions
* Substr:: Extracting substrings
* Translit:: Translating characters
* Patsubst:: Substituting text by regular expression
* Format:: Formatting strings (printf-like)
Macros for doing arithmetic
* Incr:: Decrement and increment operators
* Eval:: Evaluating integer expressions
Macros for running shell commands
* Platform macros:: Determining the platform
* Syscmd:: Executing simple commands
* Esyscmd:: Reading the output of commands
* Sysval:: Exit status
* Mkstemp:: Making temporary files
Miscellaneous builtin macros
* Errprint:: Printing error messages
* Location:: Printing current location
* M4exit:: Exiting from `m4'
Fast loading of frozen state
* Using frozen files:: Using frozen files
* Frozen file format:: Frozen file format
Compatibility with other versions of `m4'
* Extensions:: Extensions in GNU M4
* Incompatibilities:: Facilities in System V m4 not in GNU M4
* Other Incompatibilities:: Other incompatibilities
Correct version of some examples
* Improved exch:: Solution for `exch'
* Improved forloop:: Solution for `forloop'
* Improved foreach:: Solution for `foreach'
* Improved m4wrap:: Solution for `m4wrap'
* Improved cleardivert:: Solution for `cleardivert'
* Improved capitalize:: Solution for `capitalize'
* Improved fatal_error:: Solution for `fatal_error'
How to make copies of the overall M4 package
* GNU General Public License:: License for copying the M4 package
How to make copies of this manual
* GNU Free Documentation License:: License for copying this manual
Indices of concepts and macros
* Macro index:: Index for all `m4' macros
* Concept index:: Index for many concepts
File: m4.info, Node: Preliminaries, Next: Invoking m4, Prev: Top, Up: Top
1 Introduction and preliminaries
********************************
This first chapter explains what GNU `m4' is, where `m4' comes from,
how to read and use this documentation, how to call the `m4' program,
and how to report bugs about it. It concludes by giving tips for
reading the remainder of the manual.
The following chapters then detail all the features of the `m4'
language.
* Menu:
* Intro:: Introduction to `m4'
* History:: Historical references
* Bugs:: Problems and bugs
* Manual:: Using this manual
File: m4.info, Node: Intro, Next: History, Up: Preliminaries
1.1 Introduction to `m4'
========================
`m4' is a macro processor, in the sense that it copies its input to the
output, expanding macros as it goes. Macros are either builtin or
user-defined, and can take any number of arguments. Besides just doing
macro expansion, `m4' has builtin functions for including named files,
running shell commands, doing integer arithmetic, manipulating text in
various ways, performing recursion, etc.... `m4' can be used either as
a front-end to a compiler, or as a macro processor in its own right.
The `m4' macro processor is widely available on all UNIXes, and has
been standardized by POSIX. Usually, only a small percentage of users
are aware of its existence. However, those who find it often become
committed users. The popularity of GNU Autoconf, which requires GNU
`m4' for _generating_ `configure' scripts, is an incentive for many to
install it, while these people will not themselves program in `m4'.
GNU `m4' is mostly compatible with the System V, Release 3 version,
except for some minor differences. *Note Compatibility::, for more
details.
Some people find `m4' to be fairly addictive. They first use `m4'
for simple problems, then take bigger and bigger challenges, learning
how to write complex sets of `m4' macros along the way. Once really
addicted, users pursue writing of sophisticated `m4' applications even
to solve simple problems, devoting more time debugging their `m4'
scripts than doing real work. Beware that `m4' may be dangerous for
the health of compulsive programmers.
File: m4.info, Node: History, Next: Bugs, Prev: Intro, Up: Preliminaries
1.2 Historical references
=========================
`GPM' was an important ancestor of `m4'. See C. Strachey: "A General
Purpose Macro generator", Computer Journal 8,3 (1965), pp. 225 ff.
`GPM' is also succinctly described into David Gries classic "Compiler
Construction for Digital Computers".
The classic B. Kernighan and P.J. Plauger: "Software Tools",
Addison-Wesley, Inc. (1976) describes and implements a Unix
macro-processor language, which inspired Dennis Ritchie to write `m3',
a macro processor for the AP-3 minicomputer.
Kernighan and Ritchie then joined forces to develop the original
`m4', as described in "The M4 Macro Processor", Bell Laboratories
(1977). It had only 21 builtin macros.
While `GPM' was more _pure_, `m4' is meant to deal with the true
intricacies of real life: macros can be recognized without being
pre-announced, skipping whitespace or end-of-lines is easier, more
constructs are builtin instead of derived, etc.
Originally, the Kernighan and Plauger macro-processor, and then
`m3', formed the engine for the Rational FORTRAN preprocessor, that is,
the `Ratfor' equivalent of `cpp'. Later, `m4' was used as a front-end
for `Ratfor', `C' and `Cobol'.
Rene' Seindal released his implementation of `m4', GNU `m4', in
1990, with the aim of removing the artificial limitations in many of
the traditional `m4' implementations, such as maximum line length,
macro size, or number of macros.
The late Professor A. Dain Samples described and implemented a
further evolution in the form of `M5': "User's Guide to the M5 Macro
Language: 2nd edition", Electronic Announcement on comp.compilers
newsgroup (1992).
Franc,ois Pinard took over maintenance of GNU `m4' in 1992, until
1994 when he released GNU `m4' 1.4, which was the stable release for 10
years. It was at this time that GNU Autoconf decided to require GNU
`m4' as its underlying engine, since all other implementations of `m4'
had too many limitations.
More recently, in 2004, Paul Eggert released 1.4.1 and 1.4.2 which
addressed some long standing bugs in the venerable 1.4 release. Then in
2005, Gary V. Vaughan collected together the many patches to GNU `m4'
1.4 that were floating around the net and released 1.4.3 and 1.4.4.
And in 2006, Eric Blake joined the team and prepared patches for the
release of 1.4.5, 1.4.6, 1.4.7, and 1.4.8. More bug fixes were
incorporated in 2007, with releases 1.4.9 and 1.4.10, closing the
series with 1.4.11 and 1.4.12 in 2008.
Meanwhile, development has continued on new features for `m4', such
as dynamic module loading and additional builtins. When complete, GNU
`m4' 2.0 will start a new series of releases.
File: m4.info, Node: Bugs, Next: Manual, Prev: History, Up: Preliminaries
1.3 Problems and bugs
=====================
If you have problems with GNU M4 or think you've found a bug, please
report it. Before reporting a bug, make sure you've actually found a
real bug. Carefully reread the documentation and see if it really says
you can do what you're trying to do. If it's not clear whether you
should be able to do something or not, report that too; it's a bug in
the documentation!
Before reporting a bug or trying to fix it yourself, try to isolate
it to the smallest possible input file that reproduces the problem.
Then send us the input file and the exact results `m4' gave you. Also
say what you expected to occur; this will help us decide whether the
problem was really in the documentation.
Once you've got a precise problem, send e-mail to <bug-m4@gnu.org>.
Please include the version number of `m4' you are using. You can get
this information with the command `m4 --version'. Also provide details
about the platform you are executing on.
Non-bug suggestions are always welcome as well. If you have
questions about things that are unclear in the documentation or are
just obscure features, please report them too.
File: m4.info, Node: Manual, Prev: Bugs, Up: Preliminaries
1.4 Using this manual
=====================
This manual contains a number of examples of `m4' input and output, and
a simple notation is used to distinguish input, output and error
messages from `m4'. Examples are set out from the normal text, and
shown in a fixed width font, like this
This is an example of an example!
To distinguish input from output, all output from `m4' is prefixed
by the string `=>', and all error messages by the string `error-->'.
When showing how command line options affect matters, the command line
is shown with a prompt `$ like this', otherwise, you can assume that a
simple `m4' invocation will work. Thus:
$ command line to invoke m4
Example of input line
=>Output line from m4
error-->and an error message
The sequence `^D' in an example indicates the end of the input file.
The sequence `<NL>' refers to the newline character. The majority of
these examples are self-contained, and you can run them with similar
results by invoking `m4 -d'. In fact, the testsuite that is bundled in
the GNU M4 package consists of the examples in this document! Some of
the examples assume that your current directory is located where you
unpacked the installation, so if you plan on following along, you may
find it helpful to do this now:
$ cd m4-1.4.12
As each of the predefined macros in `m4' is described, a prototype
call of the macro will be shown, giving descriptive names to the
arguments, e.g.,
-- Composite: example (STRING, [COUNT = `1'], [ARGUMENT]...)
This is a sample prototype. There is not really a macro named
`example', but this documents that if there were, it would be a
Composite macro, rather than a Builtin. It requires at least one
argument, STRING. Remember that in `m4', there must not be a
space between the macro name and the opening parenthesis, unless
it was intended to call the macro without any arguments. The
brackets around COUNT and ARGUMENT show that these arguments are
optional. If COUNT is omitted, the macro behaves as if count were
`1', whereas if ARGUMENT is omitted, the macro behaves as if it
were the empty string. A blank argument is not the same as an
omitted argument. For example, `example(`a')', `example(`a',`1')',
and `example(`a',`1',)' would behave identically with COUNT set to
`1'; while `example(`a',)' and `example(`a',`')' would explicitly
pass the empty string for COUNT. The ellipses (`...') show that
the macro processes additional arguments after ARGUMENT, rather
than ignoring them.
All macro arguments in `m4' are strings, but some are given special
interpretation, e.g., as numbers, file names, regular expressions, etc.
The documentation for each macro will state how the parameters are
interpreted, and what happens if the argument cannot be parsed
according to the desired interpretation. Unless specified otherwise, a
parameter specified to be a number is parsed as a decimal, even if the
argument has leading zeros; and parsing the empty string as a number
results in 0 rather than an error, although a warning will be issued.
This document consistently writes and uses "builtin", without a
hyphen, as if it were an English word. This is how the `builtin'
primitive is spelled within `m4'.
File: m4.info, Node: Invoking m4, Next: Syntax, Prev: Preliminaries, Up: Top
2 Invoking `m4'
***************
The format of the `m4' command is:
`m4' [OPTION...] [FILE...]
All options begin with `-', or if long option names are used, with
`--'. A long option name need not be written completely, any
unambiguous prefix is sufficient. POSIX requires `m4' to recognize
arguments intermixed with files, even when `POSIXLY_CORRECT' is set in
the environment. Most options take effect at startup regardless of
their position, but some are documented below as taking effect after
any files that occurred earlier in the command line. The argument `--'
is a marker to denote the end of options.
With short options, options that do not take arguments may be
combined into a single command line argument with subsequent options,
options with mandatory arguments may be provided either as a single
command line argument or as two arguments, and options with optional
arguments must be provided as a single argument. In other words, `m4
-QPDfoo -d a -df' is equivalent to `m4 -Q -P -D foo -d -df -- ./a',
although the latter form is considered canonical.
With long options, options with mandatory arguments may be provided
with an equal sign (`=') in a single argument, or as two arguments, and
options with optional arguments must be provided as a single argument.
In other words, `m4 --def foo --debug a' is equivalent to `m4
--define=foo --debug= -- ./a', although the latter form is considered
canonical (not to mention more robust, in case a future version of `m4'
introduces an option named `--default').
`m4' understands the following options, grouped by functionality.
* Menu:
* Operation modes:: Command line options for operation modes
* Preprocessor features:: Command line options for preprocessor features
* Limits control:: Command line options for limits control
* Frozen state:: Command line options for frozen state
* Debugging options:: Command line options for debugging
* Command line files:: Specifying input files on the command line
File: m4.info, Node: Operation modes, Next: Preprocessor features, Up: Invoking m4
2.1 Command line options for operation modes
============================================
Several options control the overall operation of `m4':
`--help'
Print a help summary on standard output, then immediately exit
`m4' without reading any input files or performing any other
actions.
`--version'
Print the version number of the program on standard output, then
immediately exit `m4' without reading any input files or
performing any other actions.
`-E'
`--fatal-warnings'
Controls the effect of warnings. If unspecified, then execution
continues and exit status is unaffected when a warning is printed.
If specified exactly once, warnings become fatal; when one is
issued, execution continues, but the exit status will be non-zero.
If specified multiple times, then execution halts with non-zero
status the first time a warning is issued. The introduction of
behavior levels is new to M4 1.4.9; for behavior consistent with
earlier versions, you should specify `-E' twice.
`-i'
`--interactive'
`-e'
Makes this invocation of `m4' interactive. This means that all
output will be unbuffered, and interrupts will be ignored. The
spelling `-e' exists for compatibility with other `m4'
implementations, and issues a warning because it may be withdrawn
in a future version of GNU M4.
`-P'
`--prefix-builtins'
Internally modify _all_ builtin macro names so they all start with
the prefix `m4_'. For example, using this option, one should write
`m4_define' instead of `define', and `m4___file__' instead of
`__file__'. This option has no effect if `-R' is also specified.
`-Q'
`--quiet'
`--silent'
Suppress warnings, such as missing or superfluous arguments in
macro calls, or treating the empty string as zero.
`--warn-macro-sequence[=REGEXP]'
Issue a warning if the regular expression REGEXP has a non-empty
match in any macro definition (either by `define' or `pushdef').
Empty matches are ignored; therefore, supplying the empty string
as REGEXP disables any warning. If the optional REGEXP is not
supplied, then the default regular expression is
`\$\({[^}]*}\|[0-9][0-9]+\)' (a literal `$' followed by multiple
digits or by an open brace), since these sequences will change
semantics in the default operation of GNU M4 2.0 (due to a change
in how more than 9 arguments in a macro definition will be
handled, *note Arguments::). Providing an alternate regular
expression can provide a useful reverse lookup feature of finding
where a macro is defined to have a given definition.
`-W REGEXP'
`--word-regexp=REGEXP'
Use REGEXP as an alternative syntax for macro names. This
experimental option will not be present in all GNU `m4'
implementations (*note Changeword::).
File: m4.info, Node: Preprocessor features, Next: Limits control, Prev: Operation modes, Up: Invoking m4
2.2 Command line options for preprocessor features
==================================================
Several options allow `m4' to behave more like a preprocessor. Macro
definitions and deletions can be made on the command line, the search
path can be altered, and the output file can track where the input came
from. These features occur with the following options:
`-D NAME[=VALUE]'
`--define=NAME[=VALUE]'
This enters NAME into the symbol table. If `=VALUE' is missing,
the value is taken to be the empty string. The VALUE can be any
string, and the macro can be defined to take arguments, just as if
it was defined from within the input. This option may be given
more than once; order with respect to file names is significant,
and redefining the same NAME loses the previous value.
`-I DIRECTORY'
`--include=DIRECTORY'
Make `m4' search DIRECTORY for included files that are not found
in the current working directory. *Note Search Path::, for more
details. This option may be given more than once.
`-s'
`--synclines'
Generate synchronization lines, for use by the C preprocessor or
other similar tools. Order is significant with respect to file
names. This option is useful, for example, when `m4' is used as a
front end to a compiler. Source file name and line number
information is conveyed by directives of the form `#line LINENUM
"FILE"', which are inserted as needed into the middle of the
output. Such directives mean that the following line originated
or was expanded from the contents of input file FILE at line
LINENUM. The `"FILE"' part is often omitted when the file name
did not change from the previous directive.
Synchronization directives are always given on complete lines by
themselves. When a synchronization discrepancy occurs in the
middle of an output line, the associated synchronization directive
is delayed until the next newline that does not occur in the
middle of a quoted string or comment.
define(`twoline', `1
2')
=>#line 2 "stdin"
=>
changecom(`/*', `*/')
=>
define(`comment', `/*1
2*/')
=>#line 5
=>
dnl no line
hello
=>#line 7
=>hello
twoline
=>1
=>#line 8
=>2
comment
=>/*1
=>2*/
one comment `two
three'
=>#line 10
=>one /*1
=>2*/ two
=>three
goodbye
=>#line 12
=>goodbye
`-U NAME'
`--undefine=NAME'
This deletes any predefined meaning NAME might have. Obviously,
only predefined macros can be deleted in this way. This option
may be given more than once; undefining a NAME that does not have a
definition is silently ignored. Order is significant with respect
to file names.
File: m4.info, Node: Limits control, Next: Frozen state, Prev: Preprocessor features, Up: Invoking m4
2.3 Command line options for limits control
===========================================
There are some limits within `m4' that can be tuned. For
compatibility, `m4' also accepts some options that control limits in
other implementations, but which are automatically unbounded (limited
only by your hardware and operating system constraints) in GNU `m4'.
`-g'
`--gnu'
Enable all the extensions in this implementation. In this release
of M4, this option is always on by default; it is currently only
useful when overriding a prior use of `--traditional'. However,
having GNU behavior as default makes it impossible to write a
strictly POSIX-compliant client that avoids all incompatible GNU
M4 extensions, since such a client would have to use the non-POSIX
command-line option to force full POSIX behavior. Thus, a future
version of M4 will be changed to implicitly use the option
`--traditional' if the environment variable `POSIXLY_CORRECT' is
set. Projects that intentionally use GNU extensions should
consider using `--gnu' to state their intentions, so that the
project will not mysteriously break if the user upgrades to a
newer M4 and has `POSIXLY_CORRECT' set in their environment.
`-G'
`--traditional'
Suppress all the extensions made in this implementation, compared
to the System V version. *Note Compatibility::, for a list of
these.
`-H NUM'
`--hashsize=NUM'
Make the internal hash table for symbol lookup be NUM entries big.
For better performance, the number should be prime, but this is not
checked. The default is 509 entries. It should not be necessary
to increase this value, unless you define an excessive number of
macros.
`-L NUM'
`--nesting-limit=NUM'
Artificially limit the nesting of macro calls to NUM levels,
stopping program execution if this limit is ever exceeded. When
not specified, nesting defaults to unlimited on platforms that can
detect stack overflow, and to 1024 levels otherwise. A value of
zero means unlimited; but then heavily nested code could
potentially cause a stack overflow.
The precise effect of this option is more correctly associated
with textual nesting than dynamic recursion. It has been useful
when some complex `m4' input was generated by mechanical means, and
also in diagnosing recursive algorithms that do not scale well.
Most users never need to change this option from its default.
This option does _not_ have the ability to break endless
rescanning loops, since these do not necessarily consume much
memory or stack space. Through clever usage of rescanning loops,
one can request complex, time-consuming computations from `m4'
with useful results. Putting limitations in this area would break
`m4' power. There are many pathological cases:
`define(`a', `a')a' is only the simplest example (but *note
Compatibility::). Expecting GNU `m4' to detect these would be a
little like expecting a compiler system to detect and diagnose
endless loops: it is a quite _hard_ problem in general, if not
undecidable!
`-B NUM'
`-S NUM'
`-T NUM'
These options are present for compatibility with System V `m4', but
do nothing in this implementation. They may disappear in future
releases, and issue a warning to that effect.
`-N NUM'
`--diversions=NUM'
These options are present only for compatibility with previous
versions of GNU `m4', and were controlling the number of possible
diversions which could be used at the same time. They do nothing,
because there is no fixed limit anymore. They may disappear in
future releases, and issue a warning to that effect.
File: m4.info, Node: Frozen state, Next: Debugging options, Prev: Limits control, Up: Invoking m4
2.4 Command line options for frozen state
=========================================
GNU `m4' comes with a feature of freezing internal state (*note Frozen
files::). This can be used to speed up `m4' execution when reusing a
common initialization script.
`-F FILE'
`--freeze-state=FILE'
Once execution is finished, write out the frozen state on the
specified FILE. It is conventional, but not required, for FILE to
end in `.m4f'.
`-R FILE'
`--reload-state=FILE'
Before execution starts, recover the internal state from the
specified frozen FILE. The options `-D', `-U', and `-t' take
effect after state is reloaded, but before the input files are
read.
File: m4.info, Node: Debugging options, Next: Command line files, Prev: Frozen state, Up: Invoking m4
2.5 Command line options for debugging
======================================
Finally, there are several options for aiding in debugging `m4' scripts.
`-d[FLAGS]'
`--debug[=FLAGS]'
Set the debug-level according to the flags FLAGS. The debug-level
controls the format and amount of information presented by the
debugging functions. *Note Debug Levels::, for more details on
the format and meaning of FLAGS. If omitted, FLAGS defaults to
`aeq'.
`--debugfile=FILE'
`-o FILE'
`--error-output=FILE'
Redirect `dumpdef' output, debug messages, and trace output to the
named FILE. Warnings, error messages, and `errprint' output are
still printed to standard error. If unspecified, debug output goes
to standard error; if empty, debug output is discarded. *Note
Debug Output::, for more details. The spellings `-o' and
`--error-output' are misleading and inconsistent with other GNU
tools; for now they are silently accepted as synonyms of
`--debugfile', but in a future version of M4, using them will
cause a warning to be issued.
`-l NUM'
`--arglength=NUM'
Restrict the size of the output generated by macro tracing to NUM
characters per trace line. If unspecified or zero, output is
unlimited. *Note Debug Levels::, for more details.
`-t NAME'
`--trace=NAME'
This enables tracing for the macro NAME, at any point where it is
defined. NAME need not be defined when this option is given.
This option may be given more than once, and order is significant
with respect to file names. *Note Trace::, for more details.
File: m4.info, Node: Command line files, Prev: Debugging options, Up: Invoking m4
2.6 Specifying input files on the command line
==============================================
The remaining arguments on the command line are taken to be input file
names. If no names are present, standard input is read. A file name
of `-' is taken to mean standard input. It is conventional, but not
required, for input files to end in `.m4'.
The input files are read in the sequence given. Standard input can
be read more than once, so the file name `-' may appear multiple times
on the command line; this makes a difference when input is from a
terminal or other special file type. It is an error if an input file
ends in the middle of argument collection, a comment, or a quoted
string.
The options `--define' (`-D'), `--undefine' (`-U'), `--synclines'
(`-s'), and `--trace' (`-t') only take effect after processing input
from any file names that occur earlier on the command line. For
example, assume the file `foo' contains:
$ cat foo
bar
The text `bar' can then be redefined over multiple uses of `foo':
$ m4 -Dbar=hello foo -Dbar=world foo
=>hello
=>world
If none of the input files invoked `m4exit' (*note M4exit::), the
exit status of `m4' will be 0 for success, 1 for general failure (such
as problems with reading an input file), and 63 for version mismatch
(*note Using frozen files::).
If you need to read a file whose name starts with a `-', you can
specify it as `./-file', or use `--' to mark the end of options.
File: m4.info, Node: Syntax, Next: Macros, Prev: Invoking m4, Up: Top
3 Lexical and syntactic conventions
***********************************
As `m4' reads its input, it separates it into "tokens". A token is
either a name, a quoted string, or any single character, that is not a
part of either a name or a string. Input to `m4' can also contain
comments. GNU `m4' does not yet understand multibyte locales; all
operations are byte-oriented rather than character-oriented (although
if your locale uses a single byte encoding, such as ISO-8859-1, you
will not notice a difference). However, `m4' is eight-bit clean, so
you can use non-ASCII characters in quoted strings (*note
Changequote::), comments (*note Changecom::), and macro names (*note
Indir::), with the exception of the NUL character (the zero byte
`'\0'').
* Menu:
* Names:: Macro names
* Quoted strings:: Quoting input to `m4'
* Comments:: Comments in `m4' input
* Other tokens:: Other kinds of input tokens
* Input processing:: How `m4' copies input to output
File: m4.info, Node: Names, Next: Quoted strings, Up: Syntax
3.1 Macro names
===============
A name is any sequence of letters, digits, and the character `_'
(underscore), where the first character is not a digit. `m4' will use
the longest such sequence found in the input. If a name has a macro
definition, it will be subject to macro expansion (*note Macros::).
Names are case-sensitive.
Examples of legal names are: `foo', `_tmp', and `name01'.
File: m4.info, Node: Quoted strings, Next: Comments, Prev: Names, Up: Syntax
3.2 Quoting input to `m4'
=========================
A quoted string is a sequence of characters surrounded by quote
strings, defaulting to ``' and `'', where the nested begin and end
quotes within the string are balanced. The value of a string token is
the text, with one level of quotes stripped off. Thus
`'
=>
is the empty string, and double-quoting turns into single-quoting.
``quoted''
=>`quoted'
The quote characters can be changed at any time, using the builtin
macro `changequote'. *Note Changequote::, for more information.
File: m4.info, Node: Comments, Next: Other tokens, Prev: Quoted strings, Up: Syntax
3.3 Comments in `m4' input
==========================
Comments in `m4' are normally delimited by the characters `#' and
newline. All characters between the comment delimiters are ignored,
but the entire comment (including the delimiters) is passed through to
the output--comments are _not_ discarded by `m4'.
Comments cannot be nested, so the first newline after a `#' ends the
comment. The commenting effect of the begin-comment string can be
inhibited by quoting it.
$ m4
`quoted text' # `commented text'
=>quoted text # `commented text'
`quoting inhibits' `#' `comments'
=>quoting inhibits # comments
The comment delimiters can be changed to any string at any time,
using the builtin macro `changecom'. *Note Changecom::, for more
information.
File: m4.info, Node: Other tokens, Next: Input processing, Prev: Comments, Up: Syntax
3.4 Other kinds of input tokens
===============================
Any character, that is neither a part of a name, nor of a quoted string,
nor a comment, is a token by itself. When not in the context of macro
expansion, all of these tokens are just copied to output. However,
during macro expansion, whitespace characters (space, tab, newline,
formfeed, carriage return, vertical tab), parentheses (`(' and `)'),
comma (`,'), and dollar (`$') have additional roles, explained later.
File: m4.info, Node: Input processing, Prev: Other tokens, Up: Syntax
3.5 How `m4' copies input to output
===================================
As `m4' reads the input token by token, it will copy each token
directly to the output immediately.
The exception is when it finds a word with a macro definition. In
that case `m4' will calculate the macro's expansion, possibly reading
more input to get the arguments. It then inserts the expansion in front
of the remaining input. In other words, the resulting text from a macro
call will be read and parsed into tokens again.
`m4' expands a macro as soon as possible. If it finds a macro call
when collecting the arguments to another, it will expand the second call
first. This process continues until there are no more macro calls to
expand and all the input has been consumed.
For a running example, examine how `m4' handles this input:
format(`Result is %d', eval(`2**15'))
First, `m4' sees that the token `format' is a macro name, so it
collects the tokens `(', ``Result is %d'', `,', and ` ', before
encountering another potential macro. Sure enough, `eval' is a macro
name, so the nested argument collection picks up `(', ``2**15'', and
`)', invoking the eval macro with the lone argument of `2**15'. The
expansion of `eval(2**15)' is `32768', which is then rescanned as the
five tokens `3', `2', `7', `6', and `8'; and combined with the next
`)', the format macro now has all its arguments, as if the user had
typed:
format(`Result is %d', 32768)
The format macro expands to `Result is 32768', and we have another
round of scanning for the tokens `Result', ` ', `is', ` ', `3', `2',
`7', `6', and `8'. None of these are macros, so the final output is
=>Result is 32768
As a more complicated example, we will contrast an actual code
example from the Gnulib project(1), showing both a buggy approach and
the desired results. The user desires to output a shell assignment
statement that takes its argument and turns it into a shell variable by
converting it to uppercase and prepending a prefix. The original
attempt looks like this:
changequote([,])dnl
define([gl_STRING_MODULE_INDICATOR],
[
dnl comment
GNULIB_]translit([$1],[a-z],[A-Z])[=1
])dnl
gl_STRING_MODULE_INDICATOR([strcase])
=>
=> GNULIB_strcase=1
=>
Oops - the argument did not get capitalized. And although the manual
is not able to easily show it, both lines that appear empty actually
contain two trailing spaces. By stepping through the parse, it is easy
to see what happened. First, `m4' sees the token `changequote', which
it recognizes as a macro, followed by `(', `[', `,', `]', and `)' to
form the argument list. The macro expands to the empty string, but
changes the quoting characters to something more useful for generating
shell code (unbalanced ``' and `'' appear all the time in shell scripts,
but unbalanced `[]' tend to be rare). Also in the first line, `m4'
sees the token `dnl', which it recognizes as a builtin macro that
consumes the rest of the line, resulting in no output for that line.
The second line starts a macro definition. `m4' sees the token
`define', which it recognizes as a macro, followed by a `(',
`[gl_STRING_MODULE_INDICATOR]', and `,'. Because an unquoted comma was
encountered, the first argument is known to be the expansion of the
single-quoted string token, or `gl_STRING_MODULE_INDICATOR'. Next,
`m4' sees `<NL>', ` ', and ` ', but this whitespace is discarded as
part of argument collection. Then comes a rather lengthy single-quoted
string token, `[<NL> dnl comment<NL> GNULIB_]'. This is followed
by the token `translit', which `m4' recognizes as a macro name, so a
nested macro expansion has started.
The arguments to the `translit' are found by the tokens `(', `[$1]',
`,', `[a-z]', `,', `[A-Z]', and finally `)'. All three string
arguments are expanded (or in other words, the quotes are stripped),
and since neither `$' nor `1' need capitalization, the result of the
macro is `$1'. This expansion is rescanned, resulting in the two
literal characters `$' and `1'.
Scanning of the outer macro resumes, and picks up with `[=1<NL> ]',
and finally `)'. The collected pieces of expanded text are
concatenated, with the end result that the macro
`gl_STRING_MODULE_INDICATOR' is now defined to be the sequence `<NL>
dnl comment<NL> GNULIB_$1=1<NL> '. Once again, `dnl' is recognized
and avoids a newline in the output.
The final line is then parsed, beginning with ` ' and ` ' that are
output literally. Then `gl_STRING_MODULE_INDICATOR' is recognized as a
macro name, with an argument list of `(', `[strcase]', and `)'. Since
the definition of the macro contains the sequence `$1', that sequence
is replaced with the argument `strcase' prior to starting the rescan.
The rescan sees `<NL>' and four spaces, which are output literally, then
`dnl', which discards the text ` comment<NL>'. Next comes four more
spaces, also output literally, and the token `GNULIB_strcase', which
resulted from the earlier parameter substitution. Since that is not a
macro name, it is output literally, followed by the literal tokens `=',
`1', `<NL>', and two more spaces. Finally, the original `<NL>' seen
after the macro invocation is scanned and output literally.
Now for a corrected approach. This rearranges the use of newlines
and whitespace so that less whitespace is output (which, although
harmless to shell scripts, can be visually unappealing), and fixes the
quoting issues so that the capitalization occurs when the macro
`gl_STRING_MODULE_INDICATOR' is invoked, rather then when it is defined.
changequote([,])dnl
define([gl_STRING_MODULE_INDICATOR],
[dnl comment
GNULIB_[]translit([$1], [a-z], [A-Z])=1dnl
])dnl
gl_STRING_MODULE_INDICATOR([strcase])
=> GNULIB_STRCASE=1
The parsing of the first line is unchanged. The second line sees the
name of the macro to define, then sees the discarded `<NL>' and two
spaces, as before. But this time, the next token is `[dnl comment<NL>
GNULIB_[]translit([$1], [a-z], [A-Z])=1dnl<NL>]', which includes nested
quotes, followed by `)' to end the macro definition and `dnl' to skip
the newline. No early expansion of `translit' occurs, so the entire
string becomes the definition of the macro.
The final line is then parsed, beginning with two spaces that are
output literally, and an invocation of `gl_STRING_MODULE_INDICATOR'
with the argument `strcase'. Again, the `$1' in the macro definition
is substituted prior to rescanning. Rescanning first encounters `dnl',
and discards ` comment<NL>'. Then two spaces are output literally.
Next comes the token `GNULIB_', but that is not a macro, so it is
output literally. The token `[]' is an empty string, so it does not
affect output. Then the token `translit' is encountered.
This time, the arguments to `translit' are parsed as `(',
`[strcase]', `,', ` ', `[a-z]', `,', ` ', `[A-Z]', and `)'. The two
spaces are discarded, and the translit results in the desired result
`STRCASE'. This is rescanned, but since it is not a macro name, it is
output literally. Then the scanner sees `=' and `1', which are output
literally, followed by `dnl' which discards the rest of the definition
of `gl_STRING_MODULE_INDICATOR'. The newline at the end of output is
the literal `<NL>' that appeared after the invocation of the macro.
The order in which `m4' expands the macros can be further explored
using the trace facilities of GNU `m4' (*note Trace::).
---------- Footnotes ----------
(1) Derived from a patch in
`http://lists.gnu.org/archive/html/bug-gnulib/2007-01/msg00389.html',
and a followup patch in
`http://lists.gnu.org/archive/html/bug-gnulib/2007-02/msg00000.html'
File: m4.info, Node: Macros, Next: Definitions, Prev: Syntax, Up: Top
4 How to invoke macros
**********************
This chapter covers macro invocation, macro arguments and how macro
expansion is treated.
* Menu:
* Invocation:: Macro invocation
* Inhibiting Invocation:: Preventing macro invocation
* Macro Arguments:: Macro arguments
* Quoting Arguments:: On Quoting Arguments to macros
* Macro expansion:: Expanding macros
File: m4.info, Node: Invocation, Next: Inhibiting Invocation, Up: Macros
4.1 Macro invocation
====================
Macro invocations has one of the forms
name
which is a macro invocation without any arguments, or
name(arg1, arg2, ..., argN)
which is a macro invocation with N arguments. Macros can have any
number of arguments. All arguments are strings, but different macros
might interpret the arguments in different ways.
The opening parenthesis _must_ follow the NAME directly, with no
spaces in between. If it does not, the macro is called with no
arguments at all.
For a macro call to have no arguments, the parentheses _must_ be
left out. The macro call
name()
is a macro call with one argument, which is the empty string, not a call
with no arguments.
File: m4.info, Node: Inhibiting Invocation, Next: Macro Arguments, Prev: Invocation, Up: Macros
4.2 Preventing macro invocation
===============================
An innovation of the `m4' language, compared to some of its
predecessors (like Strachey's `GPM', for example), is the ability to
recognize macro calls without resorting to any special, prefixed
invocation character. While generally useful, this feature might
sometimes be the source of spurious, unwanted macro calls. So, GNU
`m4' offers several mechanisms or techniques for inhibiting the
recognition of names as macro calls.
First of all, many builtin macros cannot meaningfully be called
without arguments. As a GNU extension, for any of these macros,
whenever an opening parenthesis does not immediately follow their name,
the builtin macro call is not triggered. This solves the most usual
cases, like for `include' or `eval'. Later in this document, the
sentence "This macro is recognized only with parameters" refers to this
specific provision of GNU M4, also known as a blind builtin macro. For
the builtins defined by POSIX that bear this disclaimer, POSIX
specifically states that invoking those builtins without arguments is
unspecified, because many other implementations simply invoke the
builtin as though it were given one empty argument instead.
$ m4
eval
=>eval
eval(`1')
=>1
There is also a command line option (`--prefix-builtins', or `-P',
*note Invoking m4: Operation modes.) that renames all builtin macros
with a prefix of `m4_' at startup. The option has no effect whatsoever
on user defined macros. For example, with this option, one has to
write `m4_dnl' and even `m4_m4exit'. It also has no effect on whether
a macro requires parameters.
$ m4 -P
eval
=>eval
eval(`1')
=>eval(1)
m4_eval
=>m4_eval
m4_eval(`1')
=>1
Another alternative is to redefine problematic macros to a name less
likely to cause conflicts, *Note Definitions::.
If your version of GNU `m4' has the `changeword' feature compiled
in, it offers far more flexibility in specifying the syntax of macro
names, both builtin or user-defined. *Note Changeword::, for more
information on this experimental feature.
Of course, the simplest way to prevent a name from being interpreted
as a call to an existing macro is to quote it. The remainder of this
section studies a little more deeply how quoting affects macro
invocation, and how quoting can be used to inhibit macro invocation.
Even if quoting is usually done over the whole macro name, it can
also be done over only a few characters of this name (provided, of
course, that the unquoted portions are not also a macro). It is also
possible to quote the empty string, but this works only _inside_ the
name. For example:
`divert'
=>divert
`d'ivert
=>divert
di`ver't
=>divert
div`'ert
=>divert
all yield the string `divert'. While in both:
`'divert
=>
divert`'
=>
the `divert' builtin macro will be called, which expands to the empty
string.
The output of macro evaluations is always rescanned. In the
following example, the input `x`'y' yields the string `bCD', exactly as
if `m4' has been given `substr(ab`'cde, `1', `3')' as input:
define(`cde', `CDE')
=>
define(`x', `substr(ab')
=>
define(`y', `cde, `1', `3')')
=>
x`'y
=>bCD
Unquoted strings on either side of a quoted string are subject to
being recognized as macro names. In the following example, quoting the
empty string allows for the second `macro' to be recognized as such:
define(`macro', `m')
=>
macro(`m')macro
=>mmacro
macro(`m')`'macro
=>mm
Quoting may prevent recognizing as a macro name the concatenation of
a macro expansion with the surrounding characters. In this example:
define(`macro', `di$1')
=>
macro(`v')`ert'
=>divert
macro(`v')ert
=>
the input will produce the string `divert'. When the quotes were
removed, the `divert' builtin was called instead.
File: m4.info, Node: Macro Arguments, Next: Quoting Arguments, Prev: Inhibiting Invocation, Up: Macros
4.3 Macro arguments
===================
When a name is seen, and it has a macro definition, it will be expanded
as a macro.
If the name is followed by an opening parenthesis, the arguments
will be collected before the macro is called. If too few arguments are
supplied, the missing arguments are taken to be the empty string.
However, some builtins are documented to behave differently for a
missing optional argument than for an explicit empty string. If there
are too many arguments, the excess arguments are ignored. Unquoted
leading whitespace is stripped off all arguments, but whitespace
generated by a macro expansion or occurring after a macro that expanded
to an empty string remains intact. Whitespace includes space, tab,
newline, carriage return, vertical tab, and formfeed.
define(`macro', `$1')
=>
macro( unquoted leading space lost)
=>unquoted leading space lost
macro(` quoted leading space kept')
=> quoted leading space kept
macro(
divert `unquoted space kept after expansion')
=> unquoted space kept after expansion
macro(macro(`
')`whitespace from expansion kept')
=>
=>whitespace from expansion kept
macro(`unquoted trailing whitespace kept'
)
=>unquoted trailing whitespace kept
=>
Normally `m4' will issue warnings if a builtin macro is called with
an inappropriate number of arguments, but it can be suppressed with the
`--quiet' command line option (or `--silent', or `-Q', *note Invoking
m4: Operation modes.). For user defined macros, there is no check of
the number of arguments given.
$ m4
index(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `index'
=>0
index(`abc',)
=>0
index(`abc', `b', `ignored')
error-->m4:stdin:3: Warning: excess arguments to builtin `index' ignored
=>1
$ m4 -Q
index(`abc')
=>0
index(`abc',)
=>0
index(`abc', `b', `ignored')
=>1
Macros are expanded normally during argument collection, and whatever
commas, quotes and parentheses that might show up in the resulting
expanded text will serve to define the arguments as well. Thus, if FOO
expands to `, b, c', the macro call
bar(a foo, d)
is a macro call with four arguments, which are `a ', `b', `c' and `d'.
To understand why the first argument contains whitespace, remember that
unquoted leading whitespace is never part of an argument, but trailing
whitespace always is.
It is possible for a macro's definition to change during argument
collection, in which case the expansion uses the definition that was in
effect at the time the opening `(' was seen.
define(`f', `1')
=>
f(define(`f', `2'))
=>1
f
=>2
It is an error if the end of file occurs while collecting arguments.
hello world
=>hello world
define(
^D
error-->m4:stdin:2: ERROR: end of file in argument list
File: m4.info, Node: Quoting Arguments, Next: Macro expansion, Prev: Macro Arguments, Up: Macros
4.4 On Quoting Arguments to macros
==================================
Each argument has unquoted leading whitespace removed. Within each
argument, all unquoted parentheses must match. For example, if FOO is
a macro,
foo(() (`(') `(')
is a macro call, with one argument, whose value is `() (() ('. Commas
separate arguments, except when they occur inside quotes, comments, or
unquoted parentheses. *Note Pseudo Arguments::, for examples.
It is common practice to quote all arguments to macros, unless you
are sure you want the arguments expanded. Thus, in the above example
with the parentheses, the `right' way to do it is like this:
foo(`() (() (')
It is, however, in certain cases necessary (because nested expansion
must occur to create the arguments for the outer macro) or convenient
(because it uses fewer characters) to leave out quotes for some
arguments, and there is nothing wrong in doing it. It just makes life a
bit harder, if you are not careful to follow a consistent quoting style.
For consistency, this manual follows the rule of thumb that each layer
of parentheses introduces another layer of single quoting, except when
showing the consequences of quoting rules. This is done even when the
quoted string cannot be a macro, such as with integers when you have not
changed the syntax via `changeword' (*note Changeword::).
The quoting rule of thumb of one level of quoting per parentheses
has a nice property: when a macro name appears inside parentheses, you
can determine when it will be expanded. If it is not quoted, it will be
expanded prior to the outer macro, so that its expansion becomes the
argument. If it is single-quoted, it will be expanded after the outer
macro. And if it is double-quoted, it will be used as literal text
instead of a macro name.
define(`active', `ACT, IVE')
=>
define(`show', `$1 $1')
=>
show(active)
=>ACT ACT
show(`active')
=>ACT, IVE ACT, IVE
show(``active'')
=>active active
File: m4.info, Node: Macro expansion, Prev: Quoting Arguments, Up: Macros
4.5 Macro expansion
===================
When the arguments, if any, to a macro call have been collected, the
macro is expanded, and the expansion text is pushed back onto the input
(unquoted), and reread. The expansion text from one macro call might
therefore result in more macros being called, if the calls are included,
completely or partially, in the first macro calls' expansion.
Taking a very simple example, if FOO expands to `bar', and BAR
expands to `Hello', the input
$ m4 -Dbar=Hello -Dfoo=bar
foo
=>Hello
will expand first to `bar', and when this is reread and expanded, into
`Hello'.
File: m4.info, Node: Definitions, Next: Conditionals, Prev: Macros, Up: Top
5 How to define new macros
**************************
Macros can be defined, redefined and deleted in several different ways.
Also, it is possible to redefine a macro without losing a previous
value, and bring back the original value at a later time.
* Menu:
* Define:: Defining a new macro
* Arguments:: Arguments to macros
* Pseudo Arguments:: Special arguments to macros
* Undefine:: Deleting a macro
* Defn:: Renaming macros
* Pushdef:: Temporarily redefining macros
* Indir:: Indirect call of macros
* Builtin:: Indirect call of builtins
File: m4.info, Node: Define, Next: Arguments, Up: Definitions
5.1 Defining a macro
====================
The normal way to define or redefine macros is to use the builtin
`define':
-- Builtin: define (NAME, [EXPANSION])
Defines NAME to expand to EXPANSION. If EXPANSION is not given,
it is taken to be empty.
The expansion of `define' is void. The macro `define' is
recognized only with parameters.
The following example defines the macro FOO to expand to the text
`Hello World.'.
define(`foo', `Hello world.')
=>
foo
=>Hello world.
The empty line in the output is there because the newline is not a
part of the macro definition, and it is consequently copied to the
output. This can be avoided by use of the macro `dnl'. *Note Dnl::,
for details.
The first argument to `define' should be quoted; otherwise, if the
macro is already defined, you will be defining a different macro. This
example shows the problems with underquoting, since we did not want to
redefine `one':
define(foo, one)
=>
define(foo, two)
=>
one
=>two
GNU `m4' normally replaces only the _topmost_ definition of a macro
if it has several definitions from `pushdef' (*note Pushdef::). Some
other implementations of `m4' replace all definitions of a macro with
`define'. *Note Incompatibilities::, for more details.
As a GNU extension, the first argument to `define' does not have to
be a simple word. It can be any text string, even the empty string. A
macro with a non-standard name cannot be invoked in the normal way, as
the name is not recognized. It can only be referenced by the builtins
`indir' (*note Indir::) and `defn' (*note Defn::).
Arrays and associative arrays can be simulated by using non-standard
macro names.
-- Composite: array (INDEX)
-- Composite: array_set (INDEX, [VALUE])
Provide access to entries within an array. `array' reads the entry
at location INDEX, and `array_set' assigns VALUE to location INDEX.
define(`array', `defn(format(``array[%d]'', `$1'))')
=>
define(`array_set', `define(format(``array[%d]'', `$1'), `$2')')
=>
array_set(`4', `array element no. 4')
=>
array_set(`17', `array element no. 17')
=>
array(`4')
=>array element no. 4
array(eval(`10 + 7'))
=>array element no. 17
Change the `%d' to `%s' and it is an associative array.
File: m4.info, Node: Arguments, Next: Pseudo Arguments, Prev: Define, Up: Definitions
5.2 Arguments to macros
=======================
Macros can have arguments. The Nth argument is denoted by `$n' in the
expansion text, and is replaced by the Nth actual argument, when the
macro is expanded. Replacement of arguments happens before rescanning,
regardless of how many nesting levels of quoting appear in the
expansion. Here is an example of a macro with two arguments.
-- Composite: exch (ARG1, ARG2)
Expands to ARG2 followed by ARG1, effectively exchanging their
order.
define(`exch', `$2, $1')
=>
exch(`arg1', `arg2')
=>arg2, arg1
This can be used, for example, if you like the arguments to `define'
to be reversed.
define(`exch', `$2, $1')
=>
define(exch(``expansion text'', ``macro''))
=>
macro
=>expansion text
*Note Quoting Arguments::, for an explanation of the double quotes.
(You should try and improve this example so that clients of `exch' do
not have to double quote; or *note Answers: Improved exch.).
As a special case, the zeroth argument, `$0', is always the name of
the macro being expanded.
define(`test', ``Macro name: $0'')
=>
test
=>Macro name: test
If you want quoted text to appear as part of the expansion text,
remember that quotes can be nested in quoted strings. Thus, in
define(`foo', `This is macro `foo'.')
=>
foo
=>This is macro foo.
The `foo' in the expansion text is _not_ expanded, since it is a quoted
string, and not a name.
GNU `m4' allows the number following the `$' to consist of one or
more digits, allowing macros to have any number of arguments. The
extension of accepting multiple digits is incompatible with POSIX, and
is different than traditional implementations of `m4', which only
recognize one digit. Therefore, future versions of GNU M4 will phase
out this feature. To portably access beyond the ninth argument, you
can use the `argn' macro documented later (*note Shift::).
POSIX also states that `$' followed immediately by `{' in a macro
definition is implementation-defined. This version of M4 passes the
literal characters `${' through unchanged, but M4 2.0 will implement an
optional feature similar to `sh', where `${11}' expands to the eleventh
argument, to replace the current recognition of `$11'. Meanwhile, if
you want to guarantee that you will get a literal `${' in output when
expanding a macro, even when you upgrade to M4 2.0, you can use nested
quoting to your advantage:
define(`foo', `single quoted $`'{1} output')
=>
define(`bar', ``double quoted $'`{2} output'')
=>
foo(`a', `b')
=>single quoted ${1} output
bar(`a', `b')
=>double quoted ${2} output
To help you detect places in your M4 input files that might change in
behavior due to the changed behavior of M4 2.0, you can use the
`--warn-macro-sequence' command-line option (*note Invoking m4:
Operation modes.) with the default regular expression. This will add a
warning any time a macro definition includes `$' followed by multiple
digits, or by `{'. The warning is not enabled by default, because it
triggers a number of warnings in Autoconf 2.61 (and Autoconf uses `-E'
to treat warnings as errors), and because it will still be possible to
restore older behavior in M4 2.0.
$ m4 --warn-macro-sequence
define(`foo', `$001 ${1} $1')
error-->m4:stdin:1: Warning: definition of `foo' contains sequence `$001'
error-->m4:stdin:1: Warning: definition of `foo' contains sequence `${1}'
=>
foo(`bar')
=>bar ${1} bar
File: m4.info, Node: Pseudo Arguments, Next: Undefine, Prev: Arguments, Up: Definitions
5.3 Special arguments to macros
===============================
There is a special notation for the number of actual arguments supplied,
and for all the actual arguments.
The number of actual arguments in a macro call is denoted by `$#' in
the expansion text.
-- Composite: nargs (...)
Expands to a count of the number of arguments supplied.
define(`nargs', `$#')
=>
nargs
=>0
nargs()
=>1
nargs(`arg1', `arg2', `arg3')
=>3
nargs(`commas can be quoted, like this')
=>1
nargs(arg1#inside comments, commas do not separate arguments
still arg1)
=>1
nargs((unquoted parentheses, like this, group arguments))
=>1
Remember that `#' defaults to the comment character; if you forget
quotes to inhibit the comment behavior, your macro definition may not
end where you expected.
dnl Attempt to define a macro to just `$#'
define(underquoted, $#)
oops)
=>
underquoted
=>0)
=>oops
The notation `$*' can be used in the expansion text to denote all
the actual arguments, unquoted, with commas in between. For example
define(`echo', `$*')
=>
echo(arg1, arg2, arg3 , arg4)
=>arg1,arg2,arg3 ,arg4
Often each argument should be quoted, and the notation `$@' handles
that. It is just like `$*', except that it quotes each argument. A
simple example of that is:
define(`echo', `$@')
=>
echo(arg1, arg2, arg3 , arg4)
=>arg1,arg2,arg3 ,arg4
Where did the quotes go? Of course, they were eaten, when the
expanded text were reread by `m4'. To show the difference, try
define(`echo1', `$*')
=>
define(`echo2', `$@')
=>
define(`foo', `This is macro `foo'.')
=>
echo1(foo)
=>This is macro This is macro foo..
echo1(`foo')
=>This is macro foo.
echo2(foo)
=>This is macro foo.
echo2(`foo')
=>foo
*Note Trace::, if you do not understand this. As another example of the
difference, remember that comments encountered in arguments are passed
untouched to the macro, and that quoting disables comments.
define(`echo1', `$*')
=>
define(`echo2', `$@')
=>
define(`foo', `bar')
=>
echo1(#foo'foo
foo)
=>#foo'foo
=>bar
echo2(#foo'foo
foo)
=>#foobar
=>bar'
A `$' sign in the expansion text, that is not followed by anything
`m4' understands, is simply copied to the macro expansion, as any other
text is.
define(`foo', `$$$ hello $$$')
=>
foo
=>$$$ hello $$$
If you want a macro to expand to something like `$12', the judicious
use of nested quoting can put a safe character between the `$' and the
next character, relying on the rescanning to remove the nested quote.
This will prevent `m4' from interpreting the `$' sign as a reference to
an argument.
define(`foo', `no nested quote: $1')
=>
foo(`arg')
=>no nested quote: arg
define(`foo', `nested quote around $: `$'1')
=>
foo(`arg')
=>nested quote around $: $1
define(`foo', `nested empty quote after $: $`'1')
=>
foo(`arg')
=>nested empty quote after $: $1
define(`foo', `nested quote around next character: $`1'')
=>
foo(`arg')
=>nested quote around next character: $1
define(`foo', `nested quote around both: `$1'')
=>
foo(`arg')
=>nested quote around both: arg
File: m4.info, Node: Undefine, Next: Defn, Prev: Pseudo Arguments, Up: Definitions
5.4 Deleting a macro
====================
A macro definition can be removed with `undefine':
-- Builtin: undefine (NAME...)
For each argument, remove the macro NAME. The macro names must
necessarily be quoted, since they will be expanded otherwise.
The expansion of `undefine' is void. The macro `undefine' is
recognized only with parameters.
foo bar blah
=>foo bar blah
define(`foo', `some')define(`bar', `other')define(`blah', `text')
=>
foo bar blah
=>some other text
undefine(`foo')
=>
foo bar blah
=>foo other text
undefine(`bar', `blah')
=>
foo bar blah
=>foo bar blah
Undefining a macro inside that macro's expansion is safe; the macro
still expands to the definition that was in effect at the `('.
define(`f', ``$0':$1')
=>
f(f(f(undefine(`f')`hello world')))
=>f:f:f:hello world
f(`bye')
=>f(bye)
It is not an error for NAME to have no macro definition. In that
case, `undefine' does nothing.
File: m4.info, Node: Defn, Next: Pushdef, Prev: Undefine, Up: Definitions
5.5 Renaming macros
===================
It is possible to rename an already defined macro. To do this, you need
the builtin `defn':
-- Builtin: defn (NAME...)
Expands to the _quoted definition_ of each NAME. If an argument
is not a defined macro, the expansion for that argument is empty.
If NAME is a user-defined macro, the quoted definition is simply
the quoted expansion text. If, instead, there is only one NAME
and it is a builtin, the expansion is a special token, which
points to the builtin's internal definition. This token is only
meaningful as the second argument to `define' (and `pushdef'), and
is silently converted to an empty string in most other contexts.
Combining a builtin with anything else is not supported; a warning
is issued and the builtin is omitted from the final expansion.
The macro `defn' is recognized only with parameters.
Its normal use is best understood through an example, which shows
how to rename `undefine' to `zap':
define(`zap', defn(`undefine'))
=>
zap(`undefine')
=>
undefine(`zap')
=>undefine(zap)
In this way, `defn' can be used to copy macro definitions, and also
definitions of builtin macros. Even if the original macro is removed,
the other name can still be used to access the definition.
The fact that macro definitions can be transferred also explains why
you should use `$0', rather than retyping a macro's name in its
definition:
define(`foo', `This is `$0'')
=>
define(`bar', defn(`foo'))
=>
bar
=>This is bar
Macros used as string variables should be referred through `defn',
to avoid unwanted expansion of the text:
define(`string', `The macro dnl is very useful
')
=>
string
=>The macro
defn(`string')
=>The macro dnl is very useful
=>
However, it is important to remember that `m4' rescanning is purely
textual. If an unbalanced end-quote string occurs in a macro
definition, the rescan will see that embedded quote as the termination
of the quoted string, and the remainder of the macro's definition will
be rescanned unquoted. Thus it is a good idea to avoid unbalanced
end-quotes in macro definitions or arguments to macros.
define(`foo', a'a)
=>
define(`a', `A')
=>
define(`echo', `$@')
=>
foo
=>A'A
defn(`foo')
=>aA'
echo(foo)
=>AA'
On the other hand, it is possible to exploit the fact that `defn'
can concatenate multiple macros prior to the rescanning phase, in order
to join the definitions of macros that, in isolation, have unbalanced
quotes. This is particularly useful when one has used several macros to
accumulate text that M4 should rescan as a whole. In the example below,
note how the use of `defn' on `l' in isolation opens a string, which is
not closed until the next line; but used on `l' and `r' together
results in nested quoting.
define(`l', `<[>')define(`r', `<]>')
=>
changequote(`[', `]')
=>
defn([l])defn([r])
])
=><[>]defn([r])
=>)
defn([l], [r])
=><[>][<]>
Using `defn' to generate special tokens for builtin macros outside
of expected contexts can sometimes trigger warnings. But most of the
time, such tokens are silently converted to the empty string.
$ m4 -d
defn(`defn')
=>
define(defn(`divnum'), `cannot redefine a builtin token')
error-->m4:stdin:2: Warning: define: invalid macro name ignored
=>
divnum
=>0
len(defn(`divnum'))
=>0
Also note that `defn' with multiple arguments can only join text
macros, not builtins, although a future version of GNU M4 may lift this
restriction.
$ m4 -d
define(`a', `A')define(`AA', `b')
=>
traceon(`defn', `define')
=>
defn(`a', `divnum', `a')
error-->m4:stdin:3: Warning: cannot concatenate builtin `divnum'
error-->m4trace: -1- defn(`a', `divnum', `a') -> ``A'`A''
=>AA
define(`mydivnum', defn(`divnum', `divnum'))mydivnum
error-->m4:stdin:4: Warning: cannot concatenate builtin `divnum'
error-->m4:stdin:4: Warning: cannot concatenate builtin `divnum'
error-->m4trace: -2- defn(`divnum', `divnum')
error-->m4trace: -1- define(`mydivnum', `')
=>
traceoff(`defn', `define')
=>
File: m4.info, Node: Pushdef, Next: Indir, Prev: Defn, Up: Definitions
5.6 Temporarily redefining macros
=================================
It is possible to redefine a macro temporarily, reverting to the
previous definition at a later time. This is done with the builtins
`pushdef' and `popdef':
-- Builtin: pushdef (NAME, [EXPANSION])
-- Builtin: popdef (NAME...)
Analogous to `define' and `undefine'.
These macros work in a stack-like fashion. A macro is temporarily
redefined with `pushdef', which replaces an existing definition of
NAME, while saving the previous definition, before the new one is
installed. If there is no previous definition, `pushdef' behaves
exactly like `define'.
If a macro has several definitions (of which only one is
accessible), the topmost definition can be removed with `popdef'.
If there is no previous definition, `popdef' behaves like
`undefine'.
The expansion of both `pushdef' and `popdef' is void. The macros
`pushdef' and `popdef' are recognized only with parameters.
define(`foo', `Expansion one.')
=>
foo
=>Expansion one.
pushdef(`foo', `Expansion two.')
=>
foo
=>Expansion two.
pushdef(`foo', `Expansion three.')
=>
pushdef(`foo', `Expansion four.')
=>
popdef(`foo')
=>
foo
=>Expansion three.
popdef(`foo', `foo')
=>
foo
=>Expansion one.
popdef(`foo')
=>
foo
=>foo
If a macro with several definitions is redefined with `define', the
topmost definition is _replaced_ with the new definition. If it is
removed with `undefine', _all_ the definitions are removed, and not
only the topmost one. However, POSIX allows other implementations that
treat `define' as replacing an entire stack of definitions with a
single new definition, so to be portable to other implementations, it
may be worth explicitly using `popdef' and `pushdef' rather than
relying on the GNU behavior of `define'.
define(`foo', `Expansion one.')
=>
foo
=>Expansion one.
pushdef(`foo', `Expansion two.')
=>
foo
=>Expansion two.
define(`foo', `Second expansion two.')
=>
foo
=>Second expansion two.
undefine(`foo')
=>
foo
=>foo
Local variables within macros are made with `pushdef' and `popdef'.
At the start of the macro a new definition is pushed, within the macro
it is manipulated and at the end it is popped, revealing the former
definition.
It is possible to temporarily redefine a builtin with `pushdef' and
`defn'.
File: m4.info, Node: Indir, Next: Builtin, Prev: Pushdef, Up: Definitions
5.7 Indirect call of macros
===========================
Any macro can be called indirectly with `indir':
-- Builtin: indir (NAME, [ARGS...])
Results in a call to the macro NAME, which is passed the rest of
the arguments ARGS. If NAME is not defined, an error message is
printed, and the expansion is void.
The macro `indir' is recognized only with parameters.
This can be used to call macros with computed or "invalid" names
(`define' allows such names to be defined):
define(`$$internal$macro', `Internal macro (name `$0')')
=>
$$internal$macro
=>$$internal$macro
indir(`$$internal$macro')
=>Internal macro (name $$internal$macro)
The point is, here, that larger macro packages can have private
macros defined, that will not be called by accident. They can _only_ be
called through the builtin `indir'.
One other point to observe is that argument collection occurs before
`indir' invokes NAME, so if argument collection changes the value of
NAME, that will be reflected in the final expansion. This is different
than the behavior when invoking macros directly, where the definition
that was in effect before argument collection is used.
$ m4 -d
define(`f', `1')
=>
f(define(`f', `2'))
=>1
indir(`f', define(`f', `3'))
=>3
indir(`f', undefine(`f'))
error-->m4:stdin:4: undefined macro `f'
=>
When handed the result of `defn' (*note Defn::) as one of its
arguments, `indir' defers to the invoked NAME for whether a token
representing a builtin is recognized or flattened to the empty string.
$ m4 -d
indir(defn(`defn'), `divnum')
error-->m4:stdin:1: Warning: indir: invalid macro name ignored
=>
indir(`define', defn(`defn'), `divnum')
error-->m4:stdin:2: Warning: define: invalid macro name ignored
=>
indir(`define', `foo', defn(`divnum'))
=>
foo
=>0
indir(`divert', defn(`foo'))
error-->m4:stdin:5: empty string treated as 0 in builtin `divert'
=>
File: m4.info, Node: Builtin, Prev: Indir, Up: Definitions
5.8 Indirect call of builtins
=============================
Builtin macros can be called indirectly with `builtin':
-- Builtin: builtin (NAME, [ARGS...])
Results in a call to the builtin NAME, which is passed the rest of
the arguments ARGS. If NAME does not name a builtin, an error
message is printed, and the expansion is void.
The macro `builtin' is recognized only with parameters.
This can be used even if NAME has been given another definition that
has covered the original, or been undefined so that no macro maps to
the builtin.
pushdef(`define', `hidden')
=>
undefine(`undefine')
=>
define(`foo', `bar')
=>hidden
foo
=>foo
builtin(`define', `foo', defn(`divnum'))
=>
foo
=>0
builtin(`define', `foo', `BAR')
=>
foo
=>BAR
undefine(`foo')
=>undefine(foo)
foo
=>BAR
builtin(`undefine', `foo')
=>
foo
=>foo
The NAME argument only matches the original name of the builtin,
even when the `--prefix-builtins' option (or `-P', *note Invoking m4:
Operation modes.) is in effect. This is different from `indir', which
only tracks current macro names.
$ m4 -P
m4_builtin(`divnum')
=>0
m4_builtin(`m4_divnum')
error-->m4:stdin:2: undefined builtin `m4_divnum'
=>
m4_indir(`divnum')
error-->m4:stdin:3: undefined macro `divnum'
=>
m4_indir(`m4_divnum')
=>0
Note that `indir' and `builtin' can be used to invoke builtins
without arguments, even when they normally require parameters to be
recognized; but it will provoke a warning, and result in a void
expansion.
builtin
=>builtin
builtin()
error-->m4:stdin:2: undefined builtin `'
=>
builtin(`builtin')
error-->m4:stdin:3: Warning: too few arguments to builtin `builtin'
=>
builtin(`builtin',)
error-->m4:stdin:4: undefined builtin `'
=>
builtin(`builtin', ``'
')
error-->m4:stdin:5: undefined builtin ``'
error-->'
=>
indir(`index')
error-->m4:stdin:7: Warning: too few arguments to builtin `index'
=>
File: m4.info, Node: Conditionals, Next: Debugging, Prev: Definitions, Up: Top
6 Conditionals, loops, and recursion
************************************
Macros, expanding to plain text, perhaps with arguments, are not quite
enough. We would like to have macros expand to different things, based
on decisions taken at run-time. For that, we need some kind of
conditionals. Also, we would like to have some kind of loop construct,
so we could do something a number of times, or while some condition is
true.
* Menu:
* Ifdef:: Testing if a macro is defined
* Ifelse:: If-else construct, or multibranch
* Shift:: Recursion in `m4'
* Forloop:: Iteration by counting
* Foreach:: Iteration by list contents
File: m4.info, Node: Ifdef, Next: Ifelse, Up: Conditionals
6.1 Testing if a macro is defined
=================================
There are two different builtin conditionals in `m4'. The first is
`ifdef':
-- Builtin: ifdef (NAME, STRING-1, [STRING-2])
If NAME is defined as a macro, `ifdef' expands to STRING-1,
otherwise to STRING-2. If STRING-2 is omitted, it is taken to be
the empty string (according to the normal rules).
The macro `ifdef' is recognized only with parameters.
ifdef(`foo', ``foo' is defined', ``foo' is not defined')
=>foo is not defined
define(`foo', `')
=>
ifdef(`foo', ``foo' is defined', ``foo' is not defined')
=>foo is defined
ifdef(`no_such_macro', `yes', `no', `extra argument')
error-->m4:stdin:4: Warning: excess arguments to builtin `ifdef' ignored
=>no
File: m4.info, Node: Ifelse, Next: Shift, Prev: Ifdef, Up: Conditionals
6.2 If-else construct, or multibranch
=====================================
The other conditional, `ifelse', is much more powerful. It can be used
as a way to introduce a long comment, as an if-else construct, or as a
multibranch, depending on the number of arguments supplied:
-- Builtin: ifelse (COMMENT)
-- Builtin: ifelse (STRING-1, STRING-2, EQUAL, [NOT-EQUAL])
-- Builtin: ifelse (STRING-1, STRING-2, EQUAL-1, STRING-3, STRING-4,
EQUAL-2, ..., [NOT-EQUAL])
Used with only one argument, the `ifelse' simply discards it and
produces no output.
If called with three or four arguments, `ifelse' expands into
EQUAL, if STRING-1 and STRING-2 are equal (character for
character), otherwise it expands to NOT-EQUAL. A final fifth
argument is ignored, after triggering a warning.
If called with six or more arguments, and STRING-1 and STRING-2
are equal, `ifelse' expands into EQUAL-1, otherwise the first
three arguments are discarded and the processing starts again.
The macro `ifelse' is recognized only with parameters.
Using only one argument is a common `m4' idiom for introducing a
block comment, as an alternative to repeatedly using `dnl'. This
special usage is recognized by GNU `m4', so that in this case, the
warning about missing arguments is never triggered.
ifelse(`some comments')
=>
ifelse(`foo', `bar')
error-->m4:stdin:2: Warning: too few arguments to builtin `ifelse'
=>
Using three or four arguments provides decision points.
ifelse(`foo', `bar', `true')
=>
ifelse(`foo', `foo', `true')
=>true
define(`foo', `bar')
=>
ifelse(foo, `bar', `true', `false')
=>true
ifelse(foo, `foo', `true', `false')
=>false
Notice how the first argument was used unquoted; it is common to
compare the expansion of a macro with a string. With this macro, you
can now reproduce the behavior of blind builtins, where the macro is
recognized only with arguments.
define(`foo', `ifelse(`$#', `0', ``$0'', `arguments:$#')')
=>
foo
=>foo
foo()
=>arguments:1
foo(`a', `b', `c')
=>arguments:3
Since m4 is a macro language, it is even possible to write a macro
that makes defining blind macros easier:
-- Composite: define_blind (NAME, [VALUE])
Defines NAME as a blind macro, such that NAME will expand to VALUE
only when given explicit arguments. VALUE should not be the
result of `defn' (*note Defn::). This macro is only recognized
with parameters, and results in an empty string.
Defining a macro to define another macro can be a bit tricky. We
want to use a literal `$#' in the argument to the nested `define'.
However, if `$' and `#' are adjacent in the definition of
`define_blind', then it would be expanded as the number of arguments to
`define_blind' rather than the intended number of arguments to NAME.
The solution is to pass the difficult characters through extra
arguments to a helper macro `_define_blind'.
As for the limitation against using `defn', there are two reasons.
If a macro was previously defined with `define_blind', then it can
safely be renamed to a new blind macro using plain `define'; using
`define_blind' to rename it just adds another layer of `ifelse',
occupying memory and slowing down execution. And if a macro is a
builtin, then it would result in an attempt to define a macro
consisting of both text and a builtin token; this is not supported, and
the builtin token is flattened to an empty string.
With that explanation, here's the definition, and some sample usage.
Notice that `define_blind' is itself a blind macro.
$ m4 -d
define(`define_blind', `ifelse(`$#', `0', ``$0'',
`_$0(`$1', `$2', `$'`#', `$'`0')')')
=>
define(`_define_blind', `define(`$1',
`ifelse(`$3', `0', ``$4'', `$2')')')
=>
define_blind
=>define_blind
define_blind(`foo', `arguments were $*')
=>
foo
=>foo
foo(`bar')
=>arguments were bar
define(`blah', defn(`foo'))
=>
blah
=>blah
blah(`a', `b')
=>arguments were a,b
defn(`blah')
=>ifelse(`$#', `0', ``$0'', `arguments were $*')
However, `ifelse' can take more than four arguments. If given more
than four arguments, `ifelse' works like a `case' or `switch' statement
in traditional programming languages. If STRING-1 and STRING-2 are
equal, `ifelse' expands into EQUAL-1, otherwise the procedure is
repeated with the first three arguments discarded. This calls for an
example:
ifelse(`foo', `bar', `third', `gnu', `gnats')
error-->m4:stdin:1: Warning: excess arguments to builtin `ifelse' ignored
=>gnu
ifelse(`foo', `bar', `third', `gnu', `gnats', `sixth')
=>
ifelse(`foo', `bar', `third', `gnu', `gnats', `sixth', `seventh')
=>seventh
ifelse(`foo', `bar', `3', `gnu', `gnats', `6', `7', `8')
error-->m4:stdin:4: Warning: excess arguments to builtin `ifelse' ignored
=>7
Naturally, the normal case will be slightly more advanced than these
examples. A common use of `ifelse' is in macros implementing loops of
various kinds.
File: m4.info, Node: Shift, Next: Forloop, Prev: Ifelse, Up: Conditionals
6.3 Recursion in `m4'
=====================
There is no direct support for loops in `m4', but macros can be
recursive. There is no limit on the number of recursion levels, other
than those enforced by your hardware and operating system.
Loops can be programmed using recursion and the conditionals
described previously.
There is a builtin macro, `shift', which can, among other things, be
used for iterating through the actual arguments to a macro:
-- Builtin: shift (ARG1, ...)
Takes any number of arguments, and expands to all its arguments
except ARG1, separated by commas, with each argument quoted.
The macro `shift' is recognized only with parameters.
shift
=>shift
shift(`bar')
=>
shift(`foo', `bar', `baz')
=>bar,baz
An example of the use of `shift' is this macro:
-- Composite: reverse (...)
Takes any number of arguments, and reverses their order.
It is implemented as:
define(`reverse', `ifelse(`$#', `0', , `$#', `1', ``$1'',
`reverse(shift($@)), `$1'')')
=>
reverse
=>
reverse(`foo')
=>foo
reverse(`foo', `bar', `gnats', `and gnus')
=>and gnus, gnats, bar, foo
While not a very interesting macro, it does show how simple loops
can be made with `shift', `ifelse' and recursion. It also shows that
`shift' is usually used with `$@'. Another example of this is an
implementation of a short-circuiting conditional operator.
-- Composite: cond (TEST-1, STRING-1, EQUAL-1, [TEST-2], [STRING-2],
[EQUAL-2], ..., [NOT-EQUAL])
Similar to `ifelse', where an equal comparison between the first
two strings results in the third, otherwise the first three
arguments are discarded and the process repeats. The difference
is that each TEST-<N> is expanded only when it is encountered.
This means that every third argument to `cond' is normally given
one more level of quoting than the corresponding argument to
`ifelse'.
Here is the implementation of `cond', along with a demonstration of
how it can short-circuit the side effects in `side'. Notice how all
the unquoted side effects happen regardless of how many comparisons are
made with `ifelse', compared with only the relevant effects with `cond'.
define(`cond',
`ifelse(`$#', `1', `$1',
`ifelse($1, `$2', `$3',
`$0(shift(shift(shift($@))))')')')dnl
define(`side', `define(`counter', incr(counter))$1')dnl
define(`example1',
`define(`counter', `0')dnl
ifelse(side(`$1'), `yes', `one comparison: ',
side(`$1'), `no', `two comparisons: ',
side(`$1'), `maybe', `three comparisons: ',
`side(`default answer: ')')counter')dnl
define(`example2',
`define(`counter', `0')dnl
cond(`side(`$1')', `yes', `one comparison: ',
`side(`$1')', `no', `two comparisons: ',
`side(`$1')', `maybe', `three comparisons: ',
`side(`default answer: ')')counter')dnl
example1(`yes')
=>one comparison: 3
example1(`no')
=>two comparisons: 3
example1(`maybe')
=>three comparisons: 3
example1(`feeling rather indecisive today')
=>default answer: 4
example2(`yes')
=>one comparison: 1
example2(`no')
=>two comparisons: 2
example2(`maybe')
=>three comparisons: 3
example2(`feeling rather indecisive today')
=>default answer: 4
Another common task that requires iteration is joining a list of
arguments into a single string.
-- Composite: join ([SEPARATOR], [ARGS...])
-- Composite: joinall ([SEPARATOR], [ARGS...])
Generate a single-quoted string, consisting of each ARG separated
by SEPARATOR. While `joinall' always outputs a SEPARATOR between
arguments, `join' avoids the SEPARATOR for an empty ARG.
Here are some examples of its usage, based on the implementation
`m4-1.4.12/examples/join.m4' distributed in this package:
$ m4 -I examples
include(`join.m4')
=>
join,join(`-'),join(`-', `'),join(`-', `', `')
=>,,,
joinall,joinall(`-'),joinall(`-', `'),joinall(`-', `', `')
=>,,,-
join(`-', `1')
=>1
join(`-', `1', `2', `3')
=>1-2-3
join(`', `1', `2', `3')
=>123
join(`-', `', `1', `', `', `2', `')
=>1-2
joinall(`-', `', `1', `', `', `2', `')
=>-1---2-
join(`,', `1', `2', `3')
=>1,2,3
define(`nargs', `$#')dnl
nargs(join(`,', `1', `2', `3'))
=>1
Examining the implementation shows some interesting points about
several m4 programming idioms.
$ m4 -I examples
undivert(`join.m4')dnl
=>divert(`-1')
=># join(sep, args) - join each non-empty ARG into a single
=># string, with each element separated by SEP
=>define(`join',
=>`ifelse(`$#', `2', ``$2'',
=> `ifelse(`$2', `', `', ``$2'_')$0(`$1', shift(shift($@)))')')
=>define(`_join',
=>`ifelse(`$#$2', `2', `',
=> `ifelse(`$2', `', `', ``$1$2'')$0(`$1', shift(shift($@)))')')
=># joinall(sep, args) - join each ARG, including empty ones,
=># into a single string, with each element separated by SEP
=>define(`joinall', ``$2'_$0(`$1', shift($@))')
=>define(`_joinall',
=>`ifelse(`$#', `2', `', ``$1$3'$0(`$1', shift(shift($@)))')')
=>divert`'dnl
First, notice that this implementation creates helper macros `_join'
and `_joinall'. This division of labor makes it easier to output the
correct number of SEPARATOR instances: `join' and `joinall' are
responsible for the first argument, without a separator, while `_join'
and `_joinall' are responsible for all remaining arguments, always
outputting a separator when outputting an argument.
Next, observe how `join' decides to iterate to itself, because the
first ARG was empty, or to output the argument and swap over to
`_join'. If the argument is non-empty, then the nested `ifelse'
results in an unquoted `_', which is concatenated with the `$0' to form
the next macro name to invoke. The `joinall' implementation is simpler
since it does not have to suppress empty ARG; it always executes once
then defers to `_joinall'.
Another important idiom is the idea that SEPARATOR is reused for
each iteration. Each iteration has one less argument, but rather than
discarding `$1' by iterating with `$0(shift($@))', the macro discards
`$2' by using `$0(`$1', shift(shift($@)))'.
Next, notice that it is possible to compare more than one condition
in a single `ifelse' test. The test of `$#$2' against `2' allows
`_join' to iterate for two separate reasons--either there are still
more than two arguments, or there are exactly two arguments but the
last argument is not empty.
Finally, notice that these macros require exactly two arguments to
terminate recursion, but that they still correctly result in empty
output when given no ARGS (i.e., zero or one macro argument). On the
first pass when there are too few arguments, the `shift' results in no
output, but leaves an empty string to serve as the required second
argument for the second pass. Put another way, ``$1', shift($@)' is
not the same as `$@', since only the former guarantees at least two
arguments.
Sometimes, a recursive algorithm requires adding quotes to each
element, or treating multiple arguments as a single element:
-- Composite: quote (...)
-- Composite: dquote (...)
-- Composite: dquote_elt (...)
Takes any number of arguments, and adds quoting. With `quote',
only one level of quoting is added, effectively removing whitespace
after commas and turning multiple arguments into a single string.
With `dquote', two levels of quoting are added, one around each
element, and one around the list. And with `dquote_elt', two
levels of quoting are added around each element.
An actual implementation of these three macros is distributed as
`m4-1.4.12/examples/quote.m4' in this package. First, let's examine
their usage:
$ m4 -I examples
include(`quote.m4')
=>
-quote-dquote-dquote_elt-
=>----
-quote()-dquote()-dquote_elt()-
=>--`'-`'-
-quote(`1')-dquote(`1')-dquote_elt(`1')-
=>-1-`1'-`1'-
-quote(`1', `2')-dquote(`1', `2')-dquote_elt(`1', `2')-
=>-1,2-`1',`2'-`1',`2'-
define(`n', `$#')dnl
-n(quote(`1', `2'))-n(dquote(`1', `2'))-n(dquote_elt(`1', `2'))-
=>-1-1-2-
dquote(dquote_elt(`1', `2'))
=>``1'',``2''
dquote_elt(dquote(`1', `2'))
=>``1',`2''
The last two lines show that when given two arguments, `dquote'
results in one string, while `dquote_elt' results in two. Now, examine
the implementation. Note that `quote' and `dquote_elt' make decisions
based on their number of arguments, so that when called without
arguments, they result in nothing instead of a quoted empty string;
this is so that it is possible to distinguish between no arguments and
an empty first argument. `dquote', on the other hand, results in a
string no matter what, since it is still possible to tell whether it
was invoked without arguments based on the resulting string.
$ m4 -I examples
undivert(`quote.m4')dnl
=>divert(`-1')
=># quote(args) - convert args to single-quoted string
=>define(`quote', `ifelse(`$#', `0', `', ``$*'')')
=># dquote(args) - convert args to quoted list of quoted strings
=>define(`dquote', ``$@'')
=># dquote_elt(args) - convert args to list of double-quoted strings
=>define(`dquote_elt', `ifelse(`$#', `0', `', `$#', `1', ```$1''',
=> ```$1'',$0(shift($@))')')
=>divert`'dnl
It is worth pointing out that `quote(ARGS)' is more efficient than
`joinall(`,', ARGS)' for producing the same output.
One more useful macro based on `shift' allows portably selecting an
arbitrary argument (usually greater than the ninth argument), without
relying on the GNU extension of multi-digit arguments (*note
Arguments::).
-- Composite: argn (N, ...)
Expands to argument N out of the remaining arguments. N must be a
positive number. Usually invoked as `argn(`N',$@)'.
It is implemented as:
define(`argn', `ifelse(`$1', 1, ``$2'',
`argn(decr(`$1'), shift(shift($@)))')')
=>
argn(`1', `a')
=>a
define(`foo', `argn(`11', $@)')
=>
foo(`a', `b', `c', `d', `e', `f', `g', `h', `i', `j', `k', `l')
=>k
File: m4.info, Node: Forloop, Next: Foreach, Prev: Shift, Up: Conditionals
6.4 Iteration by counting
=========================
Here is an example of a loop macro that implements a simple for loop.
-- Composite: forloop (ITERATOR, START, END, TEXT)
Takes the name in ITERATOR, which must be a valid macro name, and
successively assign it each integer value from START to END,
inclusive. For each assignment to ITERATOR, append TEXT to the
expansion of the `forloop'. TEXT may refer to ITERATOR. Any
definition of ITERATOR prior to this invocation is restored.
It can, for example, be used for simple counting:
$ m4 -I examples
include(`forloop.m4')
=>
forloop(`i', `1', `8', `i ')
=>1 2 3 4 5 6 7 8
For-loops can be nested, like:
$ m4 -I examples
include(`forloop.m4')
=>
forloop(`i', `1', `4', `forloop(`j', `1', `8', ` (i, j)')
')
=> (1, 1) (1, 2) (1, 3) (1, 4) (1, 5) (1, 6) (1, 7) (1, 8)
=> (2, 1) (2, 2) (2, 3) (2, 4) (2, 5) (2, 6) (2, 7) (2, 8)
=> (3, 1) (3, 2) (3, 3) (3, 4) (3, 5) (3, 6) (3, 7) (3, 8)
=> (4, 1) (4, 2) (4, 3) (4, 4) (4, 5) (4, 6) (4, 7) (4, 8)
=>
The implementation of the `forloop' macro is fairly straightforward.
The `forloop' macro itself is simply a wrapper, which saves the
previous definition of the first argument, calls the internal macro
`_forloop', and re-establishes the saved definition of the first
argument.
The macro `_forloop' expands the fourth argument once, and tests to
see if the iterator has reached the final value. If it has not
finished, it increments the iterator (using the predefined macro
`incr', *note Incr::), and recurses.
Here is an actual implementation of `forloop', distributed as
`m4-1.4.12/examples/forloop.m4' in this package:
$ m4 -I examples
undivert(`forloop.m4')dnl
=>divert(`-1')
=># forloop(var, from, to, stmt) - simple version
=>define(`forloop', `pushdef(`$1', `$2')_forloop($@)popdef(`$1')')
=>define(`_forloop',
=> `$4`'ifelse($1, `$3', `', `define(`$1', incr($1))$0($@)')')
=>divert`'dnl
Notice the careful use of quotes. Certain macro arguments are left
unquoted, each for its own reason. Try to find out _why_ these
arguments are left unquoted, and see what happens if they are quoted.
(As presented, these two macros are useful but not very robust for
general use. They lack even basic error handling for cases like START
less than END, END not numeric, or ITERATOR not being a macro name.
See if you can improve these macros; or *note Answers: Improved
forloop.).
File: m4.info, Node: Foreach, Prev: Forloop, Up: Conditionals
6.5 Iteration by list contents
==============================
Here is an example of a loop macro that implements list iteration.
-- Composite: foreach (ITERATOR, PAREN-LIST, TEXT)
-- Composite: foreachq (ITERATOR, QUOTE-LIST, TEXT)
Takes the name in ITERATOR, which must be a valid macro name, and
successively assign it each value from PAREN-LIST or QUOTE-LIST.
In `foreach', PAREN-LIST is a comma-separated list of elements
contained in parentheses. In `foreachq', QUOTE-LIST is a
comma-separated list of elements contained in a quoted string.
For each assignment to ITERATOR, append TEXT to the overall
expansion. TEXT may refer to ITERATOR. Any definition of
ITERATOR prior to this invocation is restored.
As an example, this displays each word in a list inside of a
sentence, using an implementation of `foreach' distributed as
`m4-1.4.12/examples/foreach.m4', and `foreachq' in
`m4-1.4.12/examples/foreachq.m4'.
$ m4 -I examples
include(`foreach.m4')
=>
foreach(`x', (foo, bar, foobar), `Word was: x
')dnl
=>Word was: foo
=>Word was: bar
=>Word was: foobar
include(`foreachq.m4')
=>
foreachq(`x', `foo, bar, foobar', `Word was: x
')dnl
=>Word was: foo
=>Word was: bar
=>Word was: foobar
It is possible to be more complex; each element of the PAREN-LIST or
QUOTE-LIST can itself be a list, to pass as further arguments to a
helper macro. This example generates a shell case statement:
$ m4 -I examples
include(`foreach.m4')
=>
define(`_case', ` $1)
$2=" $1";;
')dnl
define(`_cat', `$1$2')dnl
case $`'1 in
=>case $1 in
foreach(`x', `(`(`a', `vara')', `(`b', `varb')', `(`c', `varc')')',
`_cat(`_case', x)')dnl
=> a)
=> vara=" a";;
=> b)
=> varb=" b";;
=> c)
=> varc=" c";;
esac
=>esac
The implementation of the `foreach' macro is a bit more involved; it
is a wrapper around two helper macros. First, `_arg1' is needed to
grab the first element of a list. Second, `_foreach' implements the
recursion, successively walking through the original list. Here is a
simple implementation of `foreach':
$ m4 -I examples
undivert(`foreach.m4')dnl
=>divert(`-1')
=># foreach(x, (item_1, item_2, ..., item_n), stmt)
=># parenthesized list, simple version
=>define(`foreach', `pushdef(`$1')_foreach($@)popdef(`$1')')
=>define(`_arg1', `$1')
=>define(`_foreach', `ifelse(`$2', `()', `',
=> `define(`$1', _arg1$2)$3`'$0(`$1', (shift$2), `$3')')')
=>divert`'dnl
Unfortunately, that implementation is not robust to macro names as
list elements. Each iteration of `_foreach' is stripping another layer
of quotes, leading to erratic results if list elements are not already
fully expanded. The first cut at implementing `foreachq' takes this
into account. Also, when using quoted elements in a PAREN-LIST, the
overall list must be quoted. A QUOTE-LIST has the nice property of
requiring fewer characters to create a list containing the same quoted
elements. To see the difference between the two macros, we attempt to
pass double-quoted macro names in a list, expecting the macro name on
output after one layer of quotes is removed during list iteration and
the final layer removed during the final rescan:
$ m4 -I examples
define(`a', `1')define(`b', `2')define(`c', `3')
=>
include(`foreach.m4')
=>
include(`foreachq.m4')
=>
foreach(`x', `(``a'', ``(b'', ``c)'')', `x
')
=>1
=>(2)1
=>
=>, x
=>)
foreachq(`x', ```a'', ``(b'', ``c)''', `x
')dnl
=>a
=>(b
=>c)
Obviously, `foreachq' did a better job; here is its implementation:
$ m4 -I examples
undivert(`foreachq.m4')dnl
=>include(`quote.m4')dnl
=>divert(`-1')
=># foreachq(x, `item_1, item_2, ..., item_n', stmt)
=># quoted list, simple version
=>define(`foreachq', `pushdef(`$1')_foreachq($@)popdef(`$1')')
=>define(`_arg1', `$1')
=>define(`_foreachq', `ifelse(quote($2), `', `',
=> `define(`$1', `_arg1($2)')$3`'$0(`$1', `shift($2)', `$3')')')
=>divert`'dnl
Notice that `_foreachq' had to use the helper macro `quote' defined
earlier (*note Shift::), to ensure that the embedded `ifelse' call does
not go haywire if a list element contains a comma. Unfortunately, this
implementation of `foreachq' has its own severe flaw. Whereas the
`foreach' implementation was linear, this macro is quadratic in the
number of list elements, and is much more likely to trip up the limit
set by the command line option `--nesting-limit' (or `-L', *note
Invoking m4: Limits control.). Additionally, this implementation does
not expand `defn(`ITERATOR')' very well, when compared with `foreach'.
$ m4 -I examples
include(`foreach.m4')include(`foreachq.m4')
=>
foreach(`name', `(`a', `b')', ` defn(`name')')
=> a b
foreachq(`name', ``a', `b'', ` defn(`name')')
=> _arg1(`a', `b') _arg1(shift(`a', `b'))
It is possible to have robust iteration with linear behavior and sane
ITERATOR contents for either list style. See if you can learn from the
best elements of both of these implementations to create robust macros
(or *note Answers: Improved foreach.).
File: m4.info, Node: Debugging, Next: Input Control, Prev: Conditionals, Up: Top
7 How to debug macros and input
*******************************
When writing macros for `m4', they often do not work as intended on the
first try (as is the case with most programming languages).
Fortunately, there is support for macro debugging in `m4'.
* Menu:
* Dumpdef:: Displaying macro definitions
* Trace:: Tracing macro calls
* Debug Levels:: Controlling debugging output
* Debug Output:: Saving debugging output
File: m4.info, Node: Dumpdef, Next: Trace, Up: Debugging
7.1 Displaying macro definitions
================================
If you want to see what a name expands into, you can use the builtin
`dumpdef':
-- Builtin: dumpdef ([NAMES...])
Accepts any number of arguments. If called without any arguments,
it displays the definitions of all known names, otherwise it
displays the definitions of the NAMES given. The output is
printed to the current debug file (usually standard error), and is
sorted by name. If an unknown name is encountered, a warning is
printed.
The expansion of `dumpdef' is void.
$ m4 -d
define(`foo', `Hello world.')
=>
dumpdef(`foo')
error-->foo: `Hello world.'
=>
dumpdef(`define')
error-->define: <define>
=>
The last example shows how builtin macros definitions are displayed.
The definition that is dumped corresponds to what would occur if the
macro were to be called at that point, even if other definitions are
still live due to redefining a macro during argument collection.
$ m4 -d
pushdef(`f', ``$0'1')pushdef(`f', ``$0'2')
=>
f(popdef(`f')dumpdef(`f'))
error-->f: ``$0'1'
=>f2
f(popdef(`f')dumpdef(`f'))
error-->m4:stdin:3: undefined macro `f'
=>f1
*Note Debug Levels::, for information on controlling the details of
the display.
File: m4.info, Node: Trace, Next: Debug Levels, Prev: Dumpdef, Up: Debugging
7.2 Tracing macro calls
=======================
It is possible to trace macro calls and expansions through the builtins
`traceon' and `traceoff':
-- Builtin: traceon ([NAMES...])
-- Builtin: traceoff ([NAMES...])
When called without any arguments, `traceon' and `traceoff' will
turn tracing on and off, respectively, for all currently defined
macros.
When called with arguments, only the macros listed in NAMES are
affected, whether or not they are currently defined.
The expansion of `traceon' and `traceoff' is void.
Whenever a traced macro is called and the arguments have been
collected, the call is displayed. If the expansion of the macro call
is not void, the expansion can be displayed after the call. The output
is printed to the current debug file (defaulting to standard error,
*note Debug Output::).
$ m4 -d
define(`foo', `Hello World.')
=>
define(`echo', `$@')
=>
traceon(`foo', `echo')
=>
foo
error-->m4trace: -1- foo -> `Hello World.'
=>Hello World.
echo(`gnus', `and gnats')
error-->m4trace: -1- echo(`gnus', `and gnats') -> ``gnus',`and gnats''
=>gnus,and gnats
The number between dashes is the depth of the expansion. It is one
most of the time, signifying an expansion at the outermost level, but it
increases when macro arguments contain unquoted macro calls. The
maximum number that will appear between dashes is controlled by the
option `--nesting-limit' (or `-L', *note Invoking m4: Limits control.).
Additionally, the option `--trace' (or `-t') can be used to invoke
`traceon(NAME)' before parsing input.
$ m4 -L 3 -t ifelse
ifelse(`one level')
error-->m4trace: -1- ifelse
=>
ifelse(ifelse(ifelse(`three levels')))
error-->m4trace: -3- ifelse
error-->m4trace: -2- ifelse
error-->m4trace: -1- ifelse
=>
ifelse(ifelse(ifelse(ifelse(`four levels'))))
error-->m4:stdin:3: recursion limit of 3 exceeded, use -L<N> to change it
Tracing by name is an attribute that is preserved whether the macro
is defined or not. This allows the selection of macros to trace before
those macros are defined.
$ m4 -d
traceoff(`foo')
=>
traceon(`foo')
=>
foo
=>foo
defn(`foo')
=>
define(`foo', `bar')
=>
foo
error-->m4trace: -1- foo -> `bar'
=>bar
undefine(`foo')
=>
ifdef(`foo', `yes', `no')
=>no
indir(`foo')
error-->m4:stdin:9: undefined macro `foo'
=>
define(`foo', `blah')
=>
foo
error-->m4trace: -1- foo -> `blah'
=>blah
traceoff
=>
foo
=>blah
Tracing even works on builtins. However, `defn' (*note Defn::) does
not transfer tracing status.
$ m4 -d
traceon(`traceon')
=>
traceon(`traceoff')
error-->m4trace: -1- traceon(`traceoff')
=>
traceoff(`traceoff')
error-->m4trace: -1- traceoff(`traceoff')
=>
traceoff(`traceon')
=>
traceon(`eval', `m4_divnum')
=>
define(`m4_eval', defn(`eval'))
=>
define(`m4_divnum', defn(`divnum'))
=>
eval(divnum)
error-->m4trace: -1- eval(`0') -> `0'
=>0
m4_eval(m4_divnum)
error-->m4trace: -2- m4_divnum -> `0'
=>0
*Note Debug Levels::, for information on controlling the details of
the display. The format of the trace output is not specified by POSIX,
and varies between implementations of `m4'.
File: m4.info, Node: Debug Levels, Next: Debug Output, Prev: Trace, Up: Debugging
7.3 Controlling debugging output
================================
The `-d' option to `m4' (or `--debug', *note Invoking m4: Debugging
options.) controls the amount of details presented in three categories
of output. Trace output is requested by `traceon' (*note Trace::), and
each line is prefixed by `m4trace:' in relation to a macro invocation.
Debug output tracks useful events not associated with a macro
invocation, and each line is prefixed by `m4debug:'. Finally,
`dumpdef' (*note Dumpdef::) output is affected, with no prefix added to
the output lines.
The FLAGS following the option can be one or more of the following:
`a'
In trace output, show the actual arguments that were collected
before invoking the macro. This applies to all macro calls if the
`t' flag is used, otherwise only the macros covered by calls of
`traceon'. Arguments are subject to length truncation specified by
the command line option `--arglength' (or `-l').
`c'
In trace output, show several trace lines for each macro call. A
line is shown when the macro is seen, but before the arguments are
collected; a second line when the arguments have been collected
and a third line after the call has completed.
`e'
In trace output, show the expansion of each macro call, if it is
not void. This applies to all macro calls if the `t' flag is used,
otherwise only the macros covered by calls of `traceon'. The
expansion is subject to length truncation specified by the command
line option `--arglength' (or `-l').
`f'
In debug and trace output, include the name of the current input
file in the output line.
`i'
In debug output, print a message each time the current input file
is changed.
`l'
In debug and trace output, include the current input line number
in the output line.
`p'
In debug output, print a message when a named file is found
through the path search mechanism (*note Search Path::), giving
the actual file name used.
`q'
In trace and dumpdef output, quote actual arguments and macro
expansions in the display with the current quotes. This is useful
in connection with the `a' and `e' flags above.
`t'
In trace output, trace all macro calls made in this invocation of
`m4', regardless of the settings of `traceon'.
`x'
In trace output, add a unique `macro call id' to each line of the
trace output. This is useful in connection with the `c' flag
above.
`V'
A shorthand for all of the above flags.
If no flags are specified with the `-d' option, the default is
`aeq'. The examples throughout this manual assume the default flags.
There is a builtin macro `debugmode', which allows on-the-fly
control of the debugging output format:
-- Builtin: debugmode ([FLAGS])
The argument FLAGS should be a subset of the letters listed above.
As special cases, if the argument starts with a `+', the flags are
added to the current debug flags, and if it starts with a `-', they
are removed. If no argument is present, all debugging flags are
cleared (as if no `-d' was given), and with an empty argument the
flags are reset to the default of `aeq'.
The expansion of `debugmode' is void.
$ m4
define(`foo', `FOO')
=>
traceon(`foo')
=>
debugmode()
=>
foo
error-->m4trace: -1- foo -> `FOO'
=>FOO
debugmode
=>
foo
error-->m4trace: -1- foo
=>FOO
debugmode(`+l')
=>
foo
error-->m4trace:8: -1- foo
=>FOO
The following example demonstrates the behavior of length truncation,
when specified on the command line. Note that each argument and the
final result are individually truncated. Also, the special tokens for
builtin functions are not truncated.
$ m4 -d -l 6
define(`echo', `$@')debugmode(`+t')
=>
echo(`1', `long string')
error-->m4trace: -1- echo(`1', `long s...') -> ``1',`l...'
=>1,long string
indir(`echo', defn(`changequote'))
error-->m4trace: -2- defn(`change...')
error-->m4trace: -1- indir(`echo', <changequote>) -> ``''
=>
This example shows the effects of the debug flags that are not
related to macro tracing.
$ m4 -dip -I examples
error-->m4debug: input read from stdin
include(`foo')dnl
error-->m4debug: path search for `foo' found `examples/foo'
error-->m4debug: input read from examples/foo
=>bar
error-->m4debug: input reverted to stdin, line 1
^D
error-->m4debug: input exhausted
File: m4.info, Node: Debug Output, Prev: Debug Levels, Up: Debugging
7.4 Saving debugging output
===========================
Debug and tracing output can be redirected to files using either the
`--debugfile' option to `m4' (*note Invoking m4: Debugging options.),
or with the builtin macro `debugfile':
-- Builtin: debugfile ([FILE])
Sends all further debug and trace output to FILE, opened in append
mode. If FILE is the empty string, debug and trace output are
discarded. If `debugfile' is called without any arguments, debug
and trace output are sent to standard error. This does not affect
warnings, error messages, or `errprint' output, which are always
sent to standard error. If FILE cannot be opened, the current
debug file is unchanged, and an error is issued.
The expansion of `debugfile' is void.
$ m4 -d
traceon(`divnum')
=>
divnum(`extra')
error-->m4:stdin:2: Warning: excess arguments to builtin `divnum' ignored
error-->m4trace: -1- divnum(`extra') -> `0'
=>0
debugfile()
=>
divnum(`extra')
error-->m4:stdin:4: Warning: excess arguments to builtin `divnum' ignored
=>0
debugfile
=>
divnum
error-->m4trace: -1- divnum -> `0'
=>0
File: m4.info, Node: Input Control, Next: File Inclusion, Prev: Debugging, Up: Top
8 Input control
***************
This chapter describes various builtin macros for controlling the input
to `m4'.
* Menu:
* Dnl:: Deleting whitespace in input
* Changequote:: Changing the quote characters
* Changecom:: Changing the comment delimiters
* Changeword:: Changing the lexical structure of words
* M4wrap:: Saving text until end of input
File: m4.info, Node: Dnl, Next: Changequote, Up: Input Control
8.1 Deleting whitespace in input
================================
The builtin `dnl' stands for "Discard to Next Line":
-- Builtin: dnl
All characters, up to and including the next newline, are discarded
without performing any macro expansion. A warning is issued if
the end of the file is encountered without a newline.
The expansion of `dnl' is void.
It is often used in connection with `define', to remove the newline
that follows the call to `define'. Thus
define(`foo', `Macro `foo'.')dnl A very simple macro, indeed.
foo
=>Macro foo.
The input up to and including the next newline is discarded, as
opposed to the way comments are treated (*note Comments::).
Usually, `dnl' is immediately followed by an end of line or some
other whitespace. GNU `m4' will produce a warning diagnostic if `dnl'
is followed by an open parenthesis. In this case, `dnl' will collect
and process all arguments, looking for a matching close parenthesis.
All predictable side effects resulting from this collection will take
place. `dnl' will return no output. The input following the matching
close parenthesis up to and including the next newline, on whatever
line containing it, will still be discarded.
dnl(`args are ignored, but side effects occur',
define(`foo', `like this')) while this text is ignored: undefine(`foo')
error-->m4:stdin:1: Warning: excess arguments to builtin `dnl' ignored
See how `foo' was defined, foo?
=>See how foo was defined, like this?
If the end of file is encountered without a newline character, a
warning is issued and dnl stops consuming input.
m4wrap(`m4wrap(`2 hi
')0 hi dnl 1 hi')
=>
define(`hi', `HI')
=>
^D
error-->m4:stdin:1: Warning: end of file treated as newline
=>0 HI 2 HI
File: m4.info, Node: Changequote, Next: Changecom, Prev: Dnl, Up: Input Control
8.2 Changing the quote characters
=================================
The default quote delimiters can be changed with the builtin
`changequote':
-- Builtin: changequote ([START = ``'], [END = `''])
This sets START as the new begin-quote delimiter and END as the
new end-quote delimiter. If both arguments are missing, the
default quotes (``' and `'') are used. If START is void, then
quoting is disabled. Otherwise, if END is missing or void, the
default end-quote delimiter (`'') is used. The quote delimiters
can be of any length.
The expansion of `changequote' is void.
changequote(`[', `]')
=>
define([foo], [Macro [foo].])
=>
foo
=>Macro foo.
The quotation strings can safely contain eight-bit characters. If
no single character is appropriate, START and END can be of any length.
Other implementations cap the delimiter length to five characters, but
GNU has no inherent limit.
changequote(`[[[', `]]]')
=>
define([[[foo]]], [[[Macro [[[[[foo]]]]].]]])
=>
foo
=>Macro [[foo]].
Calling `changequote' with START as the empty string will
effectively disable the quoting mechanism, leaving no way to quote text.
However, using an empty string is not portable, as some other
implementations of `m4' revert to the default quoting, while others
preserve the prior non-empty delimiter. If START is not empty, then an
empty END will use the default end-quote delimiter of `'', as
otherwise, it would be impossible to end a quoted string. Again, this
is not portable, as some other `m4' implementations reuse START as the
end-quote delimiter, while others preserve the previous non-empty
value. Omitting both arguments restores the default begin-quote and
end-quote delimiters; fortunately this behavior is portable to all
implementations of `m4'.
define(`foo', `Macro `FOO'.')
=>
changequote(`', `')
=>
foo
=>Macro `FOO'.
`foo'
=>`Macro `FOO'.'
changequote(`,)
=>
foo
=>Macro FOO.
There is no way in `m4' to quote a string containing an unmatched
begin-quote, except using `changequote' to change the current quotes.
If the quotes should be changed from, say, `[' to `[[', temporary
quote characters have to be defined. To achieve this, two calls of
`changequote' must be made, one for the temporary quotes and one for
the new quotes.
Macros are recognized in preference to the begin-quote string, so if
a prefix of START can be recognized as part of a potential macro name,
the quoting mechanism is effectively disabled. Unless you use
`changeword' (*note Changeword::), this means that START should not
begin with a letter, digit, or `_' (underscore). However, even though
quoted strings are not recognized, the quote characters can still be
discerned in macro expansion and in trace output.
define(`echo', `$@')
=>
define(`hi', `HI')
=>
changequote(`q', `Q')
=>
q hi Q hi
=>q HI Q HI
echo(hi)
=>qHIQ
changequote
=>
changequote(`-', `EOF')
=>
- hi EOF hi
=> hi HI
changequote
=>
changequote(`1', `2')
=>
hi1hi2
=>hi1hi2
hi 1hi2
=>HI hi
Quotes are recognized in preference to argument collection. In
particular, if START is a single `(', then argument collection is
effectively disabled. For portability with other implementations, it
is a good idea to avoid `(', `,', and `)' as the first character in
START.
define(`echo', `$#:$@:')
=>
define(`hi', `HI')
=>
changequote(`(',`)')
=>
echo(hi)
=>0::hi
changequote
=>
changequote(`((', `))')
=>
echo(hi)
=>1:HI:
echo((hi))
=>0::hi
changequote
=>
changequote(`,', `)')
=>
echo(hi,hi)bye)
=>1:HIhibye:
However, if you are not worried about portability, using `(' and `)'
as quoting characters has an interesting property--you can use it to
compute a quoted string containing the expansion of any quoted text, as
long as the expansion results in both balanced quotes and balanced
parentheses. The trick is realizing `expand' uses `$1' unquoted, to
trigger its expansion using the normal quoting characters, but uses
extra parentheses to group unquoted commas that occur in the expansion
without consuming whitespace following those commas. Then `_expand'
uses `changequote' to convert the extra parentheses back into quoting
characters. Note that it takes two more `changequote' invocations to
restore the original quotes. Contrast the behavior on whitespace when
using `$*', via `quote', to attempt the same task.
changequote(`[', `]')dnl
define([a], [1, (b)])dnl
define([b], [2])dnl
define([quote], [[$*]])dnl
define([expand], [_$0(($1))])dnl
define([_expand],
[changequote([(], [)])$1changequote`'changequote(`[', `]')])dnl
expand([a, a, [a, a], [[a, a]]])
=>1, (2), 1, (2), a, a, [a, a]
quote(a, a, [a, a], [[a, a]])
=>1,(2),1,(2),a, a,[a, a]
If END is a prefix of START, the end-quote will be recognized in
preference to a nested begin-quote. In particular, changing the quotes
to have the same string for START and END disables nesting of quotes.
When quote nesting is disabled, it is impossible to double-quote
strings across macro expansions, so using the same string is not done
very often.
define(`hi', `HI')
=>
changequote(`""', `"')
=>
""hi"""hi"
=>hihi
""hi" ""hi"
=>hi hi
""hi"" "hi"
=>hi" "HI"
changequote
=>
`hi`hi'hi'
=>hi`hi'hi
changequote(`"', `"')
=>
"hi"hi"hi"
=>hiHIhi
It is an error if the end of file occurs within a quoted string.
`hello world'
=>hello world
`dangling quote
^D
error-->m4:stdin:2: ERROR: end of file in string
ifelse(`dangling quote
^D
error-->m4:stdin:1: ERROR: end of file in string
File: m4.info, Node: Changecom, Next: Changeword, Prev: Changequote, Up: Input Control
8.3 Changing the comment delimiters
===================================
The default comment delimiters can be changed with the builtin macro
`changecom':
-- Builtin: changecom ([START], [END = `<NL>'])
This sets START as the new begin-comment delimiter and END as the
new end-comment delimiter. If both arguments are missing, or
START is void, then comments are disabled. Otherwise, if END is
missing or void, the default end-comment delimiter of newline is
used. The comment delimiters can be of any length.
The expansion of `changecom' is void.
define(`comment', `COMMENT')
=>
# A normal comment
=># A normal comment
changecom(`/*', `*/')
=>
# Not a comment anymore
=># Not a COMMENT anymore
But: /* this is a comment now */ while this is not a comment
=>But: /* this is a comment now */ while this is not a COMMENT
Note how comments are copied to the output, much as if they were
quoted strings. If you want the text inside a comment expanded, quote
the begin-comment delimiter.
Calling `changecom' without any arguments, or with START as the
empty string, will effectively disable the commenting mechanism. To
restore the original comment start of `#', you must explicitly ask for
it. If START is not empty, then an empty END will use the default
end-comment delimiter of newline, as otherwise, it would be impossible
to end a comment. However, this is not portable, as some other `m4'
implementations preserve the previous non-empty delimiters instead.
define(`comment', `COMMENT')
=>
changecom
=>
# Not a comment anymore
=># Not a COMMENT anymore
changecom(`#', `')
=>
# comment again
=># comment again
The comment strings can safely contain eight-bit characters. If no
single character is appropriate, START and END can be of any length.
Other implementations cap the delimiter length to five characters, but
GNU has no inherent limit.
Comments are recognized in preference to macros. However, this is
not compatible with other implementations, where macros and even quoting
takes precedence over comments, so it may change in a future release.
For portability, this means that START should not begin with a letter,
digit, or `_' (underscore), and that neither the start-quote nor the
start-comment string should be a prefix of the other.
define(`hi', `HI')
=>
define(`hi1hi2', `hello')
=>
changecom(`q', `Q')
=>
q hi Q hi
=>q hi Q HI
changecom(`1', `2')
=>
hi1hi2
=>hello
hi 1hi2
=>HI 1hi2
Comments are recognized in preference to argument collection. In
particular, if START is a single `(', then argument collection is
effectively disabled. For portability with other implementations, it
is a good idea to avoid `(', `,', and `)' as the first character in
START.
define(`echo', `$#:$*:$@:')
=>
define(`hi', `HI')
=>
changecom(`(',`)')
=>
echo(hi)
=>0:::(hi)
changecom
=>
changecom(`((', `))')
=>
echo(hi)
=>1:HI:HI:
echo((hi))
=>0:::((hi))
changecom(`,', `)')
=>
echo(hi,hi)bye)
=>1:HI,hi)bye:HI,hi)bye:
changecom
=>
echo(hi,`,`'hi',hi)
=>3:HI,,HI,HI:HI,,`'hi,HI:
echo(hi,`,`'hi',hi`'changecom(`,,', `hi'))
=>3:HI,,`'hi,HI:HI,,`'hi,HI:
It is an error if the end of file occurs within a comment.
changecom(`/*', `*/')
=>
/*dangling comment
^D
error-->m4:stdin:2: ERROR: end of file in comment
File: m4.info, Node: Changeword, Next: M4wrap, Prev: Changecom, Up: Input Control
8.4 Changing the lexical structure of words
===========================================
The macro `changeword' and all associated functionality is
experimental. It is only available if the `--enable-changeword'
option was given to `configure', at GNU `m4' installation time.
The functionality will go away in the future, to be replaced by
other new features that are more efficient at providing the same
capabilities. _Do not rely on it_. Please direct your comments
about it the same way you would do for bugs.
A file being processed by `m4' is split into quoted strings, words
(potential macro names) and simple tokens (any other single character).
Initially a word is defined by the following regular expression:
[_a-zA-Z][_a-zA-Z0-9]*
Using `changeword', you can change this regular expression:
-- Optional builtin: changeword (REGEX)
Changes the regular expression for recognizing macro names to be
REGEX. If REGEX is empty, use `[_a-zA-Z][_a-zA-Z0-9]*'. REGEX
must obey the constraint that every prefix of the desired final
pattern is also accepted by the regular expression. If REGEX
contains grouping parentheses, the macro invoked is the portion
that matched the first group, rather than the entire matching
string.
The expansion of `changeword' is void. The macro `changeword' is
recognized only with parameters.
Relaxing the lexical rules of `m4' might be useful (for example) if
you wanted to apply translations to a file of numbers:
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
changeword(`[_a-zA-Z0-9]+')
=>
define(`1', `0')1
=>0
Tightening the lexical rules is less useful, because it will
generally make some of the builtins unavailable. You could use it to
prevent accidental call of builtins, for example:
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
define(`_indir', defn(`indir'))
=>
changeword(`_[_a-zA-Z0-9]*')
=>
esyscmd(`foo')
=>esyscmd(foo)
_indir(`esyscmd', `echo hi')
=>hi
=>
Because `m4' constructs its words a character at a time, there is a
restriction on the regular expressions that may be passed to
`changeword'. This is that if your regular expression accepts `foo',
it must also accept `f' and `fo'.
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
define(`foo
', `bar
')
=>
dnl This example wants to recognize changeword, dnl, and `foo\n'.
dnl First, we check that our regexp will match.
regexp(`changeword', `[cd][a-z]*\|foo[
]')
=>0
regexp(`foo
', `[cd][a-z]*\|foo[
]')
=>0
regexp(`f', `[cd][a-z]*\|foo[
]')
=>-1
foo
=>foo
changeword(`[cd][a-z]*\|foo[
]')
=>
dnl Even though `foo\n' matches, we forgot to allow `f'.
foo
=>foo
changeword(`[cd][a-z]*\|fo*[
]?')
=>
dnl Now we can call `foo\n'.
foo
=>bar
`changeword' has another function. If the regular expression
supplied contains any grouped subexpressions, then text outside the
first of these is discarded before symbol lookup. So:
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
ifdef(`__unix__', ,
`errprint(` skipping: syscmd does not have unix semantics
')m4exit(`77')')dnl
changecom(`/*', `*/')dnl
define(`foo', `bar')dnl
changeword(`#\([_a-zA-Z0-9]*\)')
=>
#esyscmd(`echo foo \#foo')
=>foo bar
=>
`m4' now requires a `#' mark at the beginning of every macro
invocation, so one can use `m4' to preprocess plain text without losing
various words like `divert'.
In `m4', macro substitution is based on text, while in TeX, it is
based on tokens. `changeword' can throw this difference into relief.
For example, here is the same idea represented in TeX and `m4'. First,
the TeX version:
\def\a{\message{Hello}}
\catcode`\@=0
\catcode`\\=12
@a
@bye
=>Hello
Then, the `m4' version:
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
define(`a', `errprint(`Hello')')dnl
changeword(`@\([_a-zA-Z0-9]*\)')
=>
@a
=>errprint(Hello)
In the TeX example, the first line defines a macro `a' to print the
message `Hello'. The second line defines <@> to be usable instead of
<\> as an escape character. The third line defines <\> to be a normal
printing character, not an escape. The fourth line invokes the macro
`a'. So, when TeX is run on this file, it displays the message `Hello'.
When the `m4' example is passed through `m4', it outputs
`errprint(Hello)'. The reason for this is that TeX does lexical
analysis of macro definition when the macro is _defined_. `m4' just
stores the text, postponing the lexical analysis until the macro is
_used_.
You should note that using `changeword' will slow `m4' down by a
factor of about seven, once it is changed to something other than the
default regular expression. You can invoke `changeword' with the empty
string to restore the default word definition, and regain the parsing
speed.
File: m4.info, Node: M4wrap, Prev: Changeword, Up: Input Control
8.5 Saving text until end of input
==================================
It is possible to `save' some text until the end of the normal input has
been seen. Text can be saved, to be read again by `m4' when the normal
input has been exhausted. This feature is normally used to initiate
cleanup actions before normal exit, e.g., deleting temporary files.
To save input text, use the builtin `m4wrap':
-- Builtin: m4wrap (STRING, ...)
Stores STRING in a safe place, to be reread when end of input is
reached. As a GNU extension, additional arguments are
concatenated with a space to the STRING.
The expansion of `m4wrap' is void. The macro `m4wrap' is
recognized only with parameters.
define(`cleanup', `This is the `cleanup' action.
')
=>
m4wrap(`cleanup')
=>
This is the first and last normal input line.
=>This is the first and last normal input line.
^D
=>This is the cleanup action.
The saved input is only reread when the end of normal input is seen,
and not if `m4exit' is used to exit `m4'.
It is safe to call `m4wrap' from saved text, but then the order in
which the saved text is reread is undefined. If `m4wrap' is not used
recursively, the saved pieces of text are reread in the opposite order
in which they were saved (LIFO--last in, first out). However, this
behavior is likely to change in a future release, to match POSIX, so
you should not depend on this order.
It is possible to emulate POSIX behavior even with older versions of
GNU M4 by including the file `m4-1.4.12/examples/wrapfifo.m4' from the
distribution:
$ m4 -I examples
undivert(`wrapfifo.m4')dnl
=>dnl Redefine m4wrap to have FIFO semantics.
=>define(`_m4wrap_level', `0')dnl
=>define(`m4wrap',
=>`ifdef(`m4wrap'_m4wrap_level,
=> `define(`m4wrap'_m4wrap_level,
=> defn(`m4wrap'_m4wrap_level)`$1')',
=> `builtin(`m4wrap', `define(`_m4wrap_level',
=> incr(_m4wrap_level))dnl
=>m4wrap'_m4wrap_level)dnl
=>define(`m4wrap'_m4wrap_level, `$1')')')dnl
include(`wrapfifo.m4')
=>
m4wrap(`a`'m4wrap(`c
', `d')')m4wrap(`b')
=>
^D
=>abc
It is likewise possible to emulate LIFO behavior without resorting to
the GNU M4 extension of `builtin', by including the file
`m4-1.4.12/examples/wraplifo.m4' from the distribution.
(Unfortunately, both examples shown here share some subtle bugs. See
if you can find and correct them; or *note Answers: Improved m4wrap.).
$ m4 -I examples
undivert(`wraplifo.m4')dnl
=>dnl Redefine m4wrap to have LIFO semantics.
=>define(`_m4wrap_level', `0')dnl
=>define(`_m4wrap', defn(`m4wrap'))dnl
=>define(`m4wrap',
=>`ifdef(`m4wrap'_m4wrap_level,
=> `define(`m4wrap'_m4wrap_level,
=> `$1'defn(`m4wrap'_m4wrap_level))',
=> `_m4wrap(`define(`_m4wrap_level', incr(_m4wrap_level))dnl
=>m4wrap'_m4wrap_level)dnl
=>define(`m4wrap'_m4wrap_level, `$1')')')dnl
include(`wraplifo.m4')
=>
m4wrap(`a`'m4wrap(`c
', `d')')m4wrap(`b')
=>
^D
=>bac
Here is an example of implementing a factorial function using
`m4wrap':
define(`f', `ifelse(`$1', `0', `Answer: 0!=1
', eval(`$1>1'), `0', `Answer: $2$1=eval(`$2$1')
', `m4wrap(`f(decr(`$1'), `$2$1*')')')')
=>
f(`10')
=>
^D
=>Answer: 10*9*8*7*6*5*4*3*2*1=3628800
Invocations of `m4wrap' at the same recursion level are concatenated
and rescanned as usual:
define(`aa', `AA
')
=>
m4wrap(`a')m4wrap(`a')
=>
^D
=>AA
however, the transition between recursion levels behaves like an end of
file condition between two input files.
m4wrap(`m4wrap(`)')len(abc')
=>
^D
error-->m4:stdin:1: ERROR: end of file in argument list
File: m4.info, Node: File Inclusion, Next: Diversions, Prev: Input Control, Up: Top
9 File inclusion
****************
`m4' allows you to include named files at any point in the input.
* Menu:
* Include:: Including named files
* Search Path:: Searching for include files
File: m4.info, Node: Include, Next: Search Path, Up: File Inclusion
9.1 Including named files
=========================
There are two builtin macros in `m4' for including files:
-- Builtin: include (FILE)
-- Builtin: sinclude (FILE)
Both macros cause the file named FILE to be read by `m4'. When
the end of the file is reached, input is resumed from the previous
input file.
The expansion of `include' and `sinclude' is therefore the
contents of FILE.
If FILE does not exist, is a directory, or cannot otherwise be
read, the expansion is void, and `include' will fail with an error
while `sinclude' is silent. The empty string counts as a file
that does not exist.
The macros `include' and `sinclude' are recognized only with
parameters.
include(`none')
error-->m4:stdin:1: cannot open `none': No such file or directory
=>
include()
error-->m4:stdin:2: cannot open `': No such file or directory
=>
sinclude(`none')
=>
sinclude()
=>
The rest of this section assumes that `m4' is invoked with the `-I'
option (*note Invoking m4: Preprocessor features.) pointing to the
`m4-1.4.12/examples' directory shipped as part of the GNU `m4' package.
The file `m4-1.4.12/examples/incl.m4' in the distribution contains the
lines:
$ cat examples/incl.m4
=>Include file start
=>foo
=>Include file end
Normally file inclusion is used to insert the contents of a file
into the input stream. The contents of the file will be read by `m4'
and macro calls in the file will be expanded:
$ m4 -I examples
define(`foo', `FOO')
=>
include(`incl.m4')
=>Include file start
=>FOO
=>Include file end
=>
The fact that `include' and `sinclude' expand to the contents of the
file can be used to define macros that operate on entire files. Here
is an example, which defines `bar' to expand to the contents of
`incl.m4':
$ m4 -I examples
define(`bar', include(`incl.m4'))
=>
This is `bar': >>bar<<
=>This is bar: >>Include file start
=>foo
=>Include file end
=><<
This use of `include' is not trivial, though, as files can contain
quotes, commas, and parentheses, which can interfere with the way the
`m4' parser works. GNU `m4' seamlessly concatenates the file contents
with the next character, even if the included file ended in the middle
of a comment, string, or macro call. These conditions are only treated
as end of file errors if specified as input files on the command line.
In GNU `m4', an alternative method of reading files is using
`undivert' (*note Undivert::) on a named file.
File: m4.info, Node: Search Path, Prev: Include, Up: File Inclusion
9.2 Searching for include files
===============================
GNU `m4' allows included files to be found in other directories than
the current working directory.
If the `--prepend-include' or `-B' command-line option was provided
(*note Invoking m4: Preprocessor features.), those directories are
searched first, in reverse order that those options were listed on the
command line. Then `m4' looks in the current working directory. Next
comes the directories specified with the `--include' or `-I' option, in
the order found on the command line. Finally, if the `M4PATH'
environment variable is set, it is expected to contain a
colon-separated list of directories, which will be searched in order.
If the automatic search for include-files causes trouble, the `p'
debug flag (*note Debug Levels::) can help isolate the problem.
File: m4.info, Node: Diversions, Next: Text handling, Prev: File Inclusion, Up: Top
10 Diverting and undiverting output
***********************************
Diversions are a way of temporarily saving output. The output of `m4'
can at any time be diverted to a temporary file, and be reinserted into
the output stream, "undiverted", again at a later time.
Numbered diversions are counted from 0 upwards, diversion number 0
being the normal output stream. The number of simultaneous diversions
is limited mainly by the memory used to describe them, because GNU `m4'
tries to keep diversions in memory. However, there is a limit to the
overall memory usable by all diversions taken altogether (512K,
currently). When this maximum is about to be exceeded, a temporary
file is opened to receive the contents of the biggest diversion still
in memory, freeing this memory for other diversions. When creating the
temporary file, `m4' honors the value of the environment variable
`TMPDIR', and falls back to `/tmp'. So, it is theoretically possible
that the number and aggregate size of diversions is limited only by
available disk space.
Diversions make it possible to generate output in a different order
than the input was read. It is possible to implement topological
sorting dependencies. For example, GNU Autoconf makes use of
diversions under the hood to ensure that the expansion of a prerequisite
macro appears in the output prior to the expansion of a dependent macro,
regardless of which order the two macros were invoked in the user's
input file.
* Menu:
* Divert:: Diverting output
* Undivert:: Undiverting output
* Divnum:: Diversion numbers
* Cleardivert:: Discarding diverted text
File: m4.info, Node: Divert, Next: Undivert, Up: Diversions
10.1 Diverting output
=====================
Output is diverted using `divert':
-- Builtin: divert ([NUMBER = `0'])
The current diversion is changed to NUMBER. If NUMBER is left out
or empty, it is assumed to be zero. If NUMBER cannot be parsed,
the diversion is unchanged.
The expansion of `divert' is void.
When all the `m4' input will have been processed, all existing
diversions are automatically undiverted, in numerical order.
divert(`1')
This text is diverted.
divert
=>
This text is not diverted.
=>This text is not diverted.
^D
=>
=>This text is diverted.
Several calls of `divert' with the same argument do not overwrite
the previous diverted text, but append to it. Diversions are printed
after any wrapped text is expanded.
define(`text', `TEXT')
=>
divert(`1')`diverted text.'
divert
=>
m4wrap(`Wrapped text precedes ')
=>
^D
=>Wrapped TEXT precedes diverted text.
If output is diverted to a negative diversion, it is simply
discarded. This can be used to suppress unwanted output. A common
example of unwanted output is the trailing newlines after macro
definitions. Here is a common programming idiom in `m4' for avoiding
them.
divert(`-1')
define(`foo', `Macro `foo'.')
define(`bar', `Macro `bar'.')
divert
=>
Traditional implementations only supported ten diversions. But as a
GNU extension, diversion numbers can be as large as positive integers
will allow, rather than treating a multi-digit diversion number as a
request to discard text.
divert(eval(`1<<28'))world
divert(`2')hello
^D
=>hello
=>world
Note that `divert' is an English word, but also an active macro
without arguments. When processing plain text, the word might appear in
normal text and be unintentionally swallowed as a macro invocation. One
way to avoid this is to use the `-P' option to rename all builtins
(*note Invoking m4: Operation modes.). Another is to write a wrapper
that requires a parameter to be recognized.
We decided to divert the stream for irrigation.
=>We decided to the stream for irrigation.
define(`divert', `ifelse(`$#', `0', ``$0'', `builtin(`$0', $@)')')
=>
divert(`-1')
Ignored text.
divert(`0')
=>
We decided to divert the stream for irrigation.
=>We decided to divert the stream for irrigation.
File: m4.info, Node: Undivert, Next: Divnum, Prev: Divert, Up: Diversions
10.2 Undiverting output
=======================
Diverted text can be undiverted explicitly using the builtin `undivert':
-- Builtin: undivert ([DIVERSIONS...])
Undiverts the numeric DIVERSIONS given by the arguments, in the
order given. If no arguments are supplied, all diversions are
undiverted, in numerical order.
As a GNU extension, DIVERSIONS may contain non-numeric strings,
which are treated as the names of files to copy into the output
without expansion. A warning is issued if a file could not be
opened.
The expansion of `undivert' is void.
divert(`1')
This text is diverted.
divert
=>
This text is not diverted.
=>This text is not diverted.
undivert(`1')
=>
=>This text is diverted.
=>
Notice the last two blank lines. One of them comes from the newline
following `undivert', the other from the newline that followed the
`divert'! A diversion often starts with a blank line like this.
When diverted text is undiverted, it is _not_ reread by `m4', but
rather copied directly to the current output, and it is therefore not
an error to undivert into a diversion. Undiverting the empty string is
the same as specifying diversion 0; in either case nothing happens
since the output has already been flushed.
divert(`1')diverted text
divert
=>
undivert()
=>
undivert(`0')
=>
undivert
=>diverted text
=>
When a diversion has been undiverted, the diverted text is discarded,
and it is not possible to bring back diverted text more than once.
divert(`1')
This text is diverted first.
divert(`0')undivert(`1')dnl
=>
=>This text is diverted first.
undivert(`1')
=>
divert(`1')
This text is also diverted but not appended.
divert(`0')undivert(`1')dnl
=>
=>This text is also diverted but not appended.
Attempts to undivert the current diversion are silently ignored.
Thus, when the current diversion is not 0, the current diversion does
not get rearranged among the other diversions.
divert(`1')one
divert(`2')two
divert(`3')three
divert(`2')undivert`'dnl
divert`'undivert`'dnl
=>two
=>one
=>three
GNU `m4' allows named files to be undiverted. Given a non-numeric
argument, the contents of the file named will be copied, uninterpreted,
to the current output. This complements the builtin `include' (*note
Include::). To illustrate the difference, assume the file `foo'
contains:
$ cat foo
bar
then
define(`bar', `BAR')
=>
undivert(`foo')
=>bar
=>
include(`foo')
=>BAR
=>
If the file is not found (or cannot be read), an error message is
issued, and the expansion is void. It is possible to intermix files
and diversion numbers.
divert(`1')diversion one
divert(`2')undivert(`foo')dnl
divert(`3')diversion three
divert`'dnl
undivert(`1', `2', `foo', `3')dnl
=>diversion one
=>bar
=>bar
=>diversion three
File: m4.info, Node: Divnum, Next: Cleardivert, Prev: Undivert, Up: Diversions
10.3 Diversion numbers
======================
The current diversion is tracked by the builtin `divnum':
-- Builtin: divnum
Expands to the number of the current diversion.
Initial divnum
=>Initial 0
divert(`1')
Diversion one: divnum
divert(`2')
Diversion two: divnum
^D
=>
=>Diversion one: 1
=>
=>Diversion two: 2
File: m4.info, Node: Cleardivert, Prev: Divnum, Up: Diversions
10.4 Discarding diverted text
=============================
Often it is not known, when output is diverted, whether the diverted
text is actually needed. Since all non-empty diversion are brought back
on the main output stream when the end of input is seen, a method of
discarding a diversion is needed. If all diversions should be
discarded, the easiest is to end the input to `m4' with `divert(`-1')'
followed by an explicit `undivert':
divert(`1')
Diversion one: divnum
divert(`2')
Diversion two: divnum
divert(`-1')
undivert
^D
No output is produced at all.
Clearing selected diversions can be done with the following macro:
-- Composite: cleardivert ([DIVERSIONS...])
Discard the contents of each of the listed numeric DIVERSIONS.
define(`cleardivert',
`pushdef(`_n', divnum)divert(`-1')undivert($@)divert(_n)popdef(`_n')')
=>
It is called just like `undivert', but the effect is to clear the
diversions, given by the arguments. (This macro has a nasty bug! You
should try to see if you can find it and correct it; or *note Answers:
Improved cleardivert.).
File: m4.info, Node: Text handling, Next: Arithmetic, Prev: Diversions, Up: Top
11 Macros for text handling
***************************
There are a number of builtins in `m4' for manipulating text in various
ways, extracting substrings, searching, substituting, and so on.
* Menu:
* Len:: Calculating length of strings
* Index macro:: Searching for substrings
* Regexp:: Searching for regular expressions
* Substr:: Extracting substrings
* Translit:: Translating characters
* Patsubst:: Substituting text by regular expression
* Format:: Formatting strings (printf-like)
File: m4.info, Node: Len, Next: Index macro, Up: Text handling
11.1 Calculating length of strings
==================================
The length of a string can be calculated by `len':
-- Builtin: len (STRING)
Expands to the length of STRING, as a decimal number.
The macro `len' is recognized only with parameters.
len()
=>0
len(`abcdef')
=>6
File: m4.info, Node: Index macro, Next: Regexp, Prev: Len, Up: Text handling
11.2 Searching for substrings
=============================
Searching for substrings is done with `index':
-- Builtin: index (STRING, SUBSTRING)
Expands to the index of the first occurrence of SUBSTRING in
STRING. The first character in STRING has index 0. If SUBSTRING
does not occur in STRING, `index' expands to `-1'.
The macro `index' is recognized only with parameters.
index(`gnus, gnats, and armadillos', `nat')
=>7
index(`gnus, gnats, and armadillos', `dag')
=>-1
Omitting SUBSTRING evokes a warning, but still produces output;
contrast this with an empty SUBSTRING.
index(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `index'
=>0
index(`abc', `')
=>0
index(`abc', `b')
=>1
File: m4.info, Node: Regexp, Next: Substr, Prev: Index macro, Up: Text handling
11.3 Searching for regular expressions
======================================
Searching for regular expressions is done with the builtin `regexp':
-- Builtin: regexp (STRING, REGEXP, [REPLACEMENT])
Searches for REGEXP in STRING. The syntax for regular expressions
is the same as in GNU Emacs, which is similar to BRE (Basic
Regular Expressions) in POSIX. *Note Syntax of Regular
Expressions: (emacs)Regexps. Support for ERE (Extended Regular
Expressions) is not available, but will be added in GNU M4 2.0.
If REPLACEMENT is omitted, `regexp' expands to the index of the
first match of REGEXP in STRING. If REGEXP does not match
anywhere in STRING, it expands to -1.
If REPLACEMENT is supplied, and there was a match, `regexp'
changes the expansion to this argument, with `\N' substituted by
the text matched by the Nth parenthesized sub-expression of
REGEXP, up to nine sub-expressions. The escape `\&' is replaced
by the text of the entire regular expression matched. For all
other characters, `\' treats the next character literally. A
warning is issued if there were fewer sub-expressions than the
`\N' requested, or if there is a trailing `\'. If there was no
match, `regexp' expands to the empty string.
The macro `regexp' is recognized only with parameters.
regexp(`GNUs not Unix', `\<[a-z]\w+')
=>5
regexp(`GNUs not Unix', `\<Q\w*')
=>-1
regexp(`GNUs not Unix', `\w\(\w+\)$', `*** \& *** \1 ***')
=>*** Unix *** nix ***
regexp(`GNUs not Unix', `\<Q\w*', `*** \& *** \1 ***')
=>
Here are some more examples on the handling of backslash:
regexp(`abc', `\(b\)', `\\\10\a')
=>\b0a
regexp(`abc', `b', `\1\')
error-->m4:stdin:2: Warning: sub-expression 1 not present
error-->m4:stdin:2: Warning: trailing \ ignored in replacement
=>
regexp(`abc', `\(\(d\)?\)\(c\)', `\1\2\3\4\5\6')
error-->m4:stdin:3: Warning: sub-expression 4 not present
error-->m4:stdin:3: Warning: sub-expression 5 not present
error-->m4:stdin:3: Warning: sub-expression 6 not present
=>c
Omitting REGEXP evokes a warning, but still produces output;
contrast this with an empty REGEXP argument.
regexp(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `regexp'
=>0
regexp(`abc', `')
=>0
regexp(`abc', `', `\\def')
=>\def
File: m4.info, Node: Substr, Next: Translit, Prev: Regexp, Up: Text handling
11.4 Extracting substrings
==========================
Substrings are extracted with `substr':
-- Builtin: substr (STRING, FROM, [LENGTH])
Expands to the substring of STRING, which starts at index FROM,
and extends for LENGTH characters, or to the end of STRING, if
LENGTH is omitted. The starting index of a string is always 0.
The expansion is empty if there is an error parsing FROM or
LENGTH, if FROM is beyond the end of STRING, or if LENGTH is
negative.
The macro `substr' is recognized only with parameters.
substr(`gnus, gnats, and armadillos', `6')
=>gnats, and armadillos
substr(`gnus, gnats, and armadillos', `6', `5')
=>gnats
Omitting FROM evokes a warning, but still produces output.
substr(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `substr'
=>abc
substr(`abc',)
error-->m4:stdin:2: empty string treated as 0 in builtin `substr'
=>abc
File: m4.info, Node: Translit, Next: Patsubst, Prev: Substr, Up: Text handling
11.5 Translating characters
===========================
Character translation is done with `translit':
-- Builtin: translit (STRING, CHARS, [REPLACEMENT])
Expands to STRING, with each character that occurs in CHARS
translated into the character from REPLACEMENT with the same index.
If REPLACEMENT is shorter than CHARS, the excess characters of
CHARS are deleted from the expansion; if CHARS is shorter, the
excess characters in REPLACEMENT are silently ignored. If
REPLACEMENT is omitted, all characters in STRING that are present
in CHARS are deleted from the expansion. If a character appears
more than once in CHARS, only the first instance is used in making
the translation. Only a single translation pass is made, even if
characters in REPLACEMENT also appear in CHARS.
As a GNU extension, both CHARS and REPLACEMENT can contain
character-ranges, e.g., `a-z' (meaning all lowercase letters) or
`0-9' (meaning all digits). To include a dash `-' in CHARS or
REPLACEMENT, place it first or last in the entire string, or as
the last character of a range. Back-to-back ranges can share a
common endpoint. It is not an error for the last character in the
range to be `larger' than the first. In that case, the range runs
backwards, i.e., `9-0' means the string `9876543210'. The
expansion of a range is dependent on the underlying encoding of
characters, so using ranges is not always portable between
machines.
The macro `translit' is recognized only with parameters.
translit(`GNUs not Unix', `A-Z')
=>s not nix
translit(`GNUs not Unix', `a-z', `A-Z')
=>GNUS NOT UNIX
translit(`GNUs not Unix', `A-Z', `z-a')
=>tmfs not fnix
translit(`+,-12345', `+--1-5', `<;>a-c-a')
=><;>abcba
translit(`abcdef', `aabdef', `bcged')
=>bgced
In the ASCII encoding, the first example deletes all uppercase
letters, the second converts lowercase to uppercase, and the third
`mirrors' all uppercase letters, while converting them to lowercase.
The two first cases are by far the most common, even though they are not
portable to EBCDIC or other encodings. The fourth example shows a
range ending in `-', as well as back-to-back ranges. The final example
shows that `a' is mapped to `b', not `c'; the resulting `b' is not
further remapped to `g'; the `d' and `e' are swapped, and the `f' is
discarded.
Omitting CHARS evokes a warning, but still produces output.
translit(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `translit'
=>abc
File: m4.info, Node: Patsubst, Next: Format, Prev: Translit, Up: Text handling
11.6 Substituting text by regular expression
============================================
Global substitution in a string is done by `patsubst':
-- Builtin: patsubst (STRING, REGEXP, [REPLACEMENT])
Searches STRING for matches of REGEXP, and substitutes REPLACEMENT
for each match. The syntax for regular expressions is the same as
in GNU Emacs (*note Regexp::).
The parts of STRING that are not covered by any match of REGEXP
are copied to the expansion. Whenever a match is found, the
search proceeds from the end of the match, so a character from
STRING will never be substituted twice. If REGEXP matches a
string of zero length, the start position for the search is
incremented, to avoid infinite loops.
When a replacement is to be made, REPLACEMENT is inserted into the
expansion, with `\N' substituted by the text matched by the Nth
parenthesized sub-expression of PATSUBST, for up to nine
sub-expressions. The escape `\&' is replaced by the text of the
entire regular expression matched. For all other characters, `\'
treats the next character literally. A warning is issued if there
were fewer sub-expressions than the `\N' requested, or if there is
a trailing `\'.
The REPLACEMENT argument can be omitted, in which case the text
matched by REGEXP is deleted.
The macro `patsubst' is recognized only with parameters.
patsubst(`GNUs not Unix', `^', `OBS: ')
=>OBS: GNUs not Unix
patsubst(`GNUs not Unix', `\<', `OBS: ')
=>OBS: GNUs OBS: not OBS: Unix
patsubst(`GNUs not Unix', `\w*', `(\&)')
=>(GNUs)() (not)() (Unix)()
patsubst(`GNUs not Unix', `\w+', `(\&)')
=>(GNUs) (not) (Unix)
patsubst(`GNUs not Unix', `[A-Z][a-z]+')
=>GN not
patsubst(`GNUs not Unix', `not', `NOT\')
error-->m4:stdin:6: Warning: trailing \ ignored in replacement
=>GNUs NOT Unix
Here is a slightly more realistic example, which capitalizes
individual words or whole sentences, by substituting calls of the macros
`upcase' and `downcase' into the strings.
-- Composite: upcase (TEXT)
-- Composite: downcase (TEXT)
-- Composite: capitalize (TEXT)
Expand to TEXT, but with capitalization changed: `upcase' changes
all letters to upper case, `downcase' changes all letters to lower
case, and `capitalize' changes the first character of each word to
upper case and the remaining characters to lower case.
First, an example of their usage, using implementations distributed
in `m4-1.4.12/examples/capitalize.m4'.
$ m4 -I examples
include(`capitalize.m4')
=>
upcase(`GNUs not Unix')
=>GNUS NOT UNIX
downcase(`GNUs not Unix')
=>gnus not unix
capitalize(`GNUs not Unix')
=>Gnus Not Unix
Now for the implementation. There is a helper macro `_capitalize'
which puts only its first word in mixed case. Then `capitalize' merely
parses out the words, and replaces them with an invocation of
`_capitalize'. (As presented here, the `capitalize' macro has some
subtle flaws. You should try to see if you can find and correct them;
or *note Answers: Improved capitalize.).
$ m4 -I examples
undivert(`capitalize.m4')dnl
=>divert(`-1')
=># upcase(text)
=># downcase(text)
=># capitalize(text)
=># change case of text, simple version
=>define(`upcase', `translit(`$*', `a-z', `A-Z')')
=>define(`downcase', `translit(`$*', `A-Z', `a-z')')
=>define(`_capitalize',
=> `regexp(`$1', `^\(\w\)\(\w*\)',
=> `upcase(`\1')`'downcase(`\2')')')
=>define(`capitalize', `patsubst(`$1', `\w+', `_$0(`\&')')')
=>divert`'dnl
While `regexp' replaces the whole input with the replacement as soon
as there is a match, `patsubst' replaces each _occurrence_ of a match
and preserves non-matching pieces:
define(`patreg',
`patsubst($@)
regexp($@)')dnl
patreg(`bar foo baz Foo', `foo\|Foo', `FOO')
=>bar FOO baz FOO
=>FOO
patreg(`aba abb 121', `\(.\)\(.\)\1', `\2\1\2')
=>bab abb 212
=>bab
Omitting REGEXP evokes a warning, but still produces output;
contrast this with an empty REGEXP argument.
patsubst(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `patsubst'
=>abc
patsubst(`abc', `')
=>abc
patsubst(`abc', `', `\\-')
=>\-a\-b\-c\-
File: m4.info, Node: Format, Prev: Patsubst, Up: Text handling
11.7 Formatting strings (printf-like)
=====================================
Formatted output can be made with `format':
-- Builtin: format (FORMAT-STRING, ...)
Works much like the C function `printf'. The first argument
FORMAT-STRING can contain `%' specifications which are satisfied
by additional arguments, and the expansion of `format' is the
formatted string.
The macro `format' is recognized only with parameters.
Its use is best described by a few examples:
define(`foo', `The brown fox jumped over the lazy dog')
=>
format(`The string "%s" uses %d characters', foo, len(foo))
=>The string "The brown fox jumped over the lazy dog" uses 38 characters
format(`%*.*d', `-1', `-1', `1')
=>1
format(`%.0f', `56789.9876')
=>56790
len(format(`%-*X', `5000', `1'))
=>5000
ifelse(format(`%010F', `infinity'), ` INF', `success',
format(`%010F', `infinity'), ` INFINITY', `success',
format(`%010F', `infinity'))
=>success
ifelse(format(`%.1A', `1.999'), `0X1.0P+1', `success',
format(`%.1A', `1.999'), `0X2.0P+0', `success',
format(`%.1A', `1.999'))
=>success
format(`%g', `0xa.P+1')
=>20
Using the `forloop' macro defined earlier (*note Forloop::), this
example shows how `format' can be used to produce tabular output.
$ m4 -I examples
include(`forloop.m4')
=>
forloop(`i', `1', `10', `format(`%6d squared is %10d
', i, eval(i**2))')
=> 1 squared is 1
=> 2 squared is 4
=> 3 squared is 9
=> 4 squared is 16
=> 5 squared is 25
=> 6 squared is 36
=> 7 squared is 49
=> 8 squared is 64
=> 9 squared is 81
=> 10 squared is 100
=>
The builtin `format' is modeled after the ANSI C `printf' function,
and supports these `%' specifiers: `c', `s', `d', `o', `x', `X', `u',
`a', `A', `e', `E', `f', `F', `g', `G', and `%'; it supports field
widths and precisions, and the flags `+', `-', ` ', `0', `#', and `''.
For integer specifiers, the width modifiers `hh', `h', and `l' are
recognized, and for floating point specifiers, the width modifier `l'
is recognized. Items not yet supported include positional arguments,
the `n', `p', `S', and `C' specifiers, the `z', `t', `j', `L' and `ll'
modifiers, and any platform extensions available in the native
`printf'. For more details on the functioning of `printf', see the C
Library Manual, or the POSIX specification (for example, `%a' is
supported even on platforms that haven't yet implemented C99
hexadecimal floating point output natively).
Unrecognized specifiers result in a warning. It is anticipated that
a future release of GNU `m4' will support more specifiers, and give
better warnings when various problems such as overflow are encountered.
Likewise, escape sequences are not yet recognized.
format(`%p', `0')
error-->m4:stdin:1: Warning: unrecognized specifier in `%p'
=>
File: m4.info, Node: Arithmetic, Next: Shell commands, Prev: Text handling, Up: Top
12 Macros for doing arithmetic
******************************
Integer arithmetic is included in `m4', with a C-like syntax. As
convenient shorthands, there are builtins for simple increment and
decrement operations.
* Menu:
* Incr:: Decrement and increment operators
* Eval:: Evaluating integer expressions
File: m4.info, Node: Incr, Next: Eval, Up: Arithmetic
12.1 Decrement and increment operators
======================================
Increment and decrement of integers are supported using the builtins
`incr' and `decr':
-- Builtin: incr (NUMBER)
-- Builtin: decr (NUMBER)
Expand to the numerical value of NUMBER, incremented or
decremented, respectively, by one. Except for the empty string,
the expansion is empty if NUMBER could not be parsed.
The macros `incr' and `decr' are recognized only with parameters.
incr(`4')
=>5
decr(`7')
=>6
incr()
error-->m4:stdin:3: empty string treated as 0 in builtin `incr'
=>1
decr()
error-->m4:stdin:4: empty string treated as 0 in builtin `decr'
=>-1
File: m4.info, Node: Eval, Prev: Incr, Up: Arithmetic
12.2 Evaluating integer expressions
===================================
Integer expressions are evaluated with `eval':
-- Builtin: eval (EXPRESSION, [RADIX = `10'], [WIDTH])
Expands to the value of EXPRESSION. The expansion is empty if a
problem is encountered while parsing the arguments. If specified,
RADIX and WIDTH control the format of the output.
Calculations are done with 32-bit signed numbers. Overflow
silently results in wraparound. A warning is issued if division
by zero is attempted, or if EXPRESSION could not be parsed.
Expressions can contain the following operators, listed in order of
decreasing precedence.
`()'
Parentheses
`+ - ~ !'
Unary plus and minus, and bitwise and logical negation
`**'
Exponentiation
`* / %'
Multiplication, division, and modulo
`+ -'
Addition and subtraction
`<< >>'
Shift left or right
`> >= < <='
Relational operators
`== !='
Equality operators
`&'
Bitwise and
`^'
Bitwise exclusive-or
`|'
Bitwise or
`&&'
Logical and
`||'
Logical or
The macro `eval' is recognized only with parameters.
All binary operators, except exponentiation, are left associative. C
operators that perform variable assignment, such as `+=' or `--', are
not implemented, since `eval' only operates on constants, not
variables. Attempting to use them results in an error. However, since
traditional implementations treated `=' as an undocumented alias for
`==' as opposed to an assignment operator, this usage is supported as a
special case. Be aware that a future version of GNU M4 may support
assignment semantics as an extension when POSIX mode is not requested,
and that using `=' to check equality is not portable.
eval(`2 = 2')
error-->m4:stdin:1: Warning: recommend ==, not =, for equality operator
=>1
eval(`++0')
error-->m4:stdin:2: invalid operator in eval: ++0
=>
eval(`0 |= 1')
error-->m4:stdin:3: invalid operator in eval: 0 |= 1
=>
Note that some older `m4' implementations use `^' as an alternate
operator for the exponentiation, although POSIX requires the C behavior
of bitwise exclusive-or. The precedence of the negation operators, `~'
and `!', was traditionally lower than equality. The unary operators
could not be used reliably more than once on the same term without
intervening parentheses. The traditional precedence of the equality
operators `==' and `!=' was identical instead of lower than the
relational operators such as `<', even through GNU M4 1.4.8. Starting
with version 1.4.9, GNU M4 correctly follows POSIX precedence rules.
M4 scripts designed to be portable between releases must be aware that
parentheses may be required to enforce C precedence rules. Likewise,
division by zero, even in the unused branch of a short-circuiting
operator, is not always well-defined in other implementations.
Following are some examples where the current version of M4 follows C
precedence rules, but where older versions and some other
implementations of `m4' require explicit parentheses to get the correct
result:
eval(`1 == 2 > 0')
=>1
eval(`(1 == 2) > 0')
=>0
eval(`! 0 * 2')
=>2
eval(`! (0 * 2)')
=>1
eval(`1 | 1 ^ 1')
=>1
eval(`(1 | 1) ^ 1')
=>0
eval(`+ + - ~ ! ~ 0')
=>1
eval(`2 || 1 / 0')
=>1
eval(`0 || 1 / 0')
error-->m4:stdin:9: divide by zero in eval: 0 || 1 / 0
=>
eval(`0 && 1 % 0')
=>0
eval(`2 && 1 % 0')
error-->m4:stdin:11: modulo by zero in eval: 2 && 1 % 0
=>
As a GNU extension, the operator `**' performs integral
exponentiation. The operator is right-associative, and if evaluated,
the exponent must be non-negative, and at least one of the arguments
must be non-zero, or a warning is issued.
eval(`2 ** 3 ** 2')
=>512
eval(`(2 ** 3) ** 2')
=>64
eval(`0 ** 1')
=>0
eval(`2 ** 0')
=>1
eval(`0 ** 0')
=>
error-->m4:stdin:5: divide by zero in eval: 0 ** 0
eval(`4 ** -2')
error-->m4:stdin:6: negative exponent in eval: 4 ** -2
=>
Within EXPRESSION, (but not RADIX or WIDTH), numbers without a
special prefix are decimal. A simple `0' prefix introduces an octal
number. `0x' introduces a hexadecimal number. As GNU extensions, `0b'
introduces a binary number. `0r' introduces a number expressed in any
radix between 1 and 36: the prefix should be immediately followed by
the decimal expression of the radix, a colon, then the digits making
the number. For radix 1, leading zeros are ignored, and all remaining
digits must be `1'; for all other radices, the digits are `0', `1', `2',
.... Beyond `9', the digits are `a', `b' ... up to `z'. Lower and
upper case letters can be used interchangeably in numbers prefixes and
as number digits.
Parentheses may be used to group subexpressions whenever needed.
For the relational operators, a true relation returns `1', and a false
relation return `0'.
Here are a few examples of use of `eval'.
eval(`-3 * 5')
=>-15
eval(`-99 / 10')
=>-9
eval(`-99 % 10')
=>-9
eval(`99 % -10')
=>9
eval(index(`Hello world', `llo') >= 0)
=>1
eval(`0r1:0111 + 0b100 + 0r3:12')
=>12
define(`square', `eval(`($1) ** 2')')
=>
square(`9')
=>81
square(square(`5')` + 1')
=>676
define(`foo', `666')
=>
eval(`foo / 6')
error-->m4:stdin:11: bad expression in eval: foo / 6
=>
eval(foo / 6)
=>111
As the last two lines show, `eval' does not handle macro names, even
if they expand to a valid expression (or part of a valid expression).
Therefore all macros must be expanded before they are passed to `eval'.
Some calculations are not portable to other implementations, since
they have undefined semantics in C, but GNU `m4' has well-defined
behavior on overflow. When shifting, an out-of-range shift amount is
implicitly brought into the range of 32-bit signed integers using an
implicit bit-wise and with 0x1f).
define(`max_int', eval(`0x7fffffff'))
=>
define(`min_int', incr(max_int))
=>
eval(min_int` < 0')
=>1
eval(max_int` > 0')
=>1
ifelse(eval(min_int` / -1'), min_int, `overflow occurred')
=>overflow occurred
min_int
=>-2147483648
eval(`0x80000000 % -1')
=>0
eval(`-4 >> 1')
=>-2
eval(`-4 >> 33')
=>-2
If RADIX is specified, it specifies the radix to be used in the
expansion. The default radix is 10; this is also the case if RADIX is
the empty string. A warning results if the radix is outside the range
of 1 through 36, inclusive. The result of `eval' is always taken to be
signed. No radix prefix is output, and for radices greater than 10,
the digits are lower case. The WIDTH argument specifies the minimum
output width, excluding any negative sign. The result is zero-padded
to extend the expansion to the requested width. A warning results if
the width is negative. If RADIX or WIDTH is out of bounds, the
expansion of `eval' is empty.
eval(`666', `10')
=>666
eval(`666', `11')
=>556
eval(`666', `6')
=>3030
eval(`666', `6', `10')
=>0000003030
eval(`-666', `6', `10')
=>-0000003030
eval(`10', `', `0')
=>10
`0r1:'eval(`10', `1', `11')
=>0r1:01111111111
eval(`10', `16')
=>a
eval(`1', `37')
error-->m4:stdin:9: radix 37 in builtin `eval' out of range
=>
eval(`1', , `-1')
error-->m4:stdin:10: negative width to builtin `eval'
=>
eval()
error-->m4:stdin:11: empty string treated as 0 in builtin `eval'
=>0
File: m4.info, Node: Shell commands, Next: Miscellaneous, Prev: Arithmetic, Up: Top
13 Macros for running shell commands
************************************
There are a few builtin macros in `m4' that allow you to run shell
commands from within `m4'.
Note that the definition of a valid shell command is system
dependent. On UNIX systems, this is the typical `/bin/sh'. But on
other systems, such as native Windows, the shell has a different syntax
of commands that it understands. Some examples in this chapter assume
`/bin/sh', and also demonstrate how to quit early with a known exit
value if this is not the case.
* Menu:
* Platform macros:: Determining the platform
* Syscmd:: Executing simple commands
* Esyscmd:: Reading the output of commands
* Sysval:: Exit status
* Mkstemp:: Making temporary files
File: m4.info, Node: Platform macros, Next: Syscmd, Up: Shell commands
13.1 Determining the platform
=============================
Sometimes it is desirable for an input file to know which platform `m4'
is running on. GNU `m4' provides several macros that are predefined to
expand to the empty string; checking for their existence will confirm
platform details.
-- Optional builtin: __gnu__
-- Optional builtin: __os2__
-- Optional builtin: os2
-- Optional builtin: __unix__
-- Optional builtin: unix
-- Optional builtin: __windows__
-- Optional builtin: windows
Each of these macros is conditionally defined as needed to
describe the environment of `m4'. If defined, each macro expands
to the empty string. For now, these macros silently ignore all
arguments, but in a future release of M4, they might warn if
arguments are present.
When GNU extensions are in effect (that is, when you did not use the
`-G' option, *note Invoking m4: Limits control.), GNU `m4' will define
the macro `__gnu__' to expand to the empty string.
$ m4
__gnu__
=>
__gnu__(`ignored')
=>
Extensions are ifdef(`__gnu__', `active', `inactive')
=>Extensions are active
$ m4 -G
__gnu__
=>__gnu__
__gnu__(`ignored')
=>__gnu__(ignored)
Extensions are ifdef(`__gnu__', `active', `inactive')
=>Extensions are inactive
On UNIX systems, GNU `m4' will define `__unix__' by default, or
`unix' when the `-G' option is specified.
On native Windows systems, GNU `m4' will define `__windows__' by
default, or `windows' when the `-G' option is specified.
On OS/2 systems, GNU `m4' will define `__os2__' by default, or `os2'
when the `-G' option is specified.
If GNU `m4' does not provide a platform macro for your system,
please report that as a bug.
define(`provided', `0')
=>
ifdef(`__unix__', `define(`provided', incr(provided))')
=>
ifdef(`__windows__', `define(`provided', incr(provided))')
=>
ifdef(`__os2__', `define(`provided', incr(provided))')
=>
provided
=>1
File: m4.info, Node: Syscmd, Next: Esyscmd, Prev: Platform macros, Up: Shell commands
13.2 Executing simple commands
==============================
Any shell command can be executed, using `syscmd':
-- Builtin: syscmd (SHELL-COMMAND)
Executes SHELL-COMMAND as a shell command.
The expansion of `syscmd' is void, _not_ the output from
SHELL-COMMAND! Output or error messages from SHELL-COMMAND are
not read by `m4'. *Note Esyscmd::, if you need to process the
command output.
Prior to executing the command, `m4' flushes its buffers. The
default standard input, output and error of SHELL-COMMAND are the
same as those of `m4'.
The macro `syscmd' is recognized only with parameters.
define(`foo', `FOO')
=>
syscmd(`echo foo')
=>foo
=>
Note how the expansion of `syscmd' keeps the trailing newline of the
command, as well as using the newline that appeared after the macro.
The following is an example of SHELL-COMMAND using the same standard
input as `m4':
$ echo "m4wrap(\`syscmd(\`cat')')" | m4
=>
It tells `m4' to read all of its input before executing the wrapped
text, then hand a valid (albeit emptied) pipe as standard input for the
`cat' subcommand. Therefore, you should be careful when using standard
input (either by specifying no files, or by passing `-' as a file name
on the command line, *note Invoking m4: Command line files.), and also
invoking subcommands via `syscmd' or `esyscmd' that consume data from
standard input. When standard input is a seekable file, the subprocess
will pick up with the next character not yet processed by `m4'; when it
is a pipe or other non-seekable file, there is no guarantee how much
data will already be buffered by `m4' and thus unavailable to the child.
File: m4.info, Node: Esyscmd, Next: Sysval, Prev: Syscmd, Up: Shell commands
13.3 Reading the output of commands
===================================
If you want `m4' to read the output of a shell command, use `esyscmd':
-- Builtin: esyscmd (SHELL-COMMAND)
Expands to the standard output of the shell command SHELL-COMMAND.
Prior to executing the command, `m4' flushes its buffers. The
default standard input and standard error of SHELL-COMMAND are the
same as those of `m4'. The error output of SHELL-COMMAND is not a
part of the expansion: it will appear along with the error output
of `m4'.
The macro `esyscmd' is recognized only with parameters.
define(`foo', `FOO')
=>
esyscmd(`echo foo')
=>FOO
=>
Note how the expansion of `esyscmd' keeps the trailing newline of
the command, as well as using the newline that appeared after the macro.
Just as with `syscmd', care must be exercised when sharing standard
input between `m4' and the child process of `esyscmd'.
File: m4.info, Node: Sysval, Next: Mkstemp, Prev: Esyscmd, Up: Shell commands
13.4 Exit status
================
To see whether a shell command succeeded, use `sysval':
-- Builtin: sysval
Expands to the exit status of the last shell command run with
`syscmd' or `esyscmd'. Expands to 0 if no command has been run
yet.
sysval
=>0
syscmd(`false')
=>
ifelse(sysval, `0', `zero', `non-zero')
=>non-zero
syscmd(`exit 2')
=>
sysval
=>2
syscmd(`true')
=>
sysval
=>0
esyscmd(`false')
=>
ifelse(sysval, `0', `zero', `non-zero')
=>non-zero
esyscmd(`exit 2')
=>
sysval
=>2
esyscmd(`true')
=>
sysval
=>0
`sysval' results in 127 if there was a problem executing the
command, for example, if the system-imposed argument length is exceeded,
or if there were not enough resources to fork. It is not possible to
distinguish between failed execution and successful execution that had
an exit status of 127.
On UNIX platforms, where it is possible to detect when command
execution is terminated by a signal, rather than a normal exit, the
result is the signal number shifted left by eight bits.
dnl This test assumes kill is a shell builtin, and that signals are
dnl recognizable.
ifdef(`__unix__', ,
`errprint(` skipping: syscmd does not have unix semantics
')m4exit(`77')')dnl
syscmd(`kill -9 $$')
=>
sysval
=>2304
syscmd()
=>
sysval
=>0
esyscmd(`kill -9 $$')
=>
sysval
=>2304
File: m4.info, Node: Mkstemp, Prev: Sysval, Up: Shell commands
13.5 Making temporary files
===========================
Commands specified to `syscmd' or `esyscmd' might need a temporary
file, for output or for some other purpose. There is a builtin macro,
`mkstemp', for making a temporary file:
-- Builtin: mkstemp (TEMPLATE)
-- Builtin: maketemp (TEMPLATE)
Expands to the quoted name of a new, empty file, made from the
string TEMPLATE, which should end with the string `XXXXXX'. The
six `X' characters are then replaced with random characters
matching the regular expression `[a-zA-Z0-9._-]', in order to make
the file name unique. If fewer than six `X' characters are found
at the end of `template', the result will be longer than the
template. The created file will have access permissions as if by
`chmod =rw,go=', meaning that the current umask of the `m4'
process is taken into account, and at most only the current user
can read and write the file.
The traditional behavior, standardized by POSIX, is that
`maketemp' merely replaces the trailing `X' with the process id,
without creating a file or quoting the expansion, and without
ensuring that the resulting string is a unique file name. In
part, this means that using the same TEMPLATE twice in the same
input file will result in the same expansion. This behavior is a
security hole, as it is very easy for another process to guess the
name that will be generated, and thus interfere with a subsequent
use of `syscmd' trying to manipulate that file name. Hence, POSIX
has recommended that all new implementations of `m4' provide the
secure `mkstemp' builtin, and that users of `m4' check for its
existence.
The expansion is void and an error issued if a temporary file could
not be created.
The macros `mkstemp' and `maketemp' are recognized only with
parameters.
If you try this next example, you will most likely get different
output for the two file names, since the replacement characters are
randomly chosen:
$ m4
define(`tmp', `oops')
=>
maketemp(`/tmp/fooXXXXXX')
=>/tmp/fooa07346
ifdef(`mkstemp', `define(`maketemp', defn(`mkstemp'))',
`define(`mkstemp', defn(`maketemp'))dnl
errprint(`warning: potentially insecure maketemp implementation
')')
=>
mkstemp(`doc')
=>docQv83Uw
Unless you use the `--traditional' command line option (or `-G',
*note Invoking m4: Limits control.), the GNU version of `maketemp' is
secure. This means that using the same template to multiple calls will
generate multiple files. However, we recommend that you use the new
`mkstemp' macro, introduced in GNU M4 1.4.8, which is secure even in
traditional mode. Also, as of M4 1.4.11, the secure implementation
quotes the resulting file name, so that you are guaranteed to know what
file was created even if the random file name happens to match an
existing macro. Notice that this example is careful to use `defn' to
avoid unintended expansion of `foo'.
$ m4
define(`foo', `errprint(`oops')')
=>
syscmd(`rm -f foo-??????')sysval
=>0
define(`file1', maketemp(`foo-XXXXXX'))dnl
ifelse(esyscmd(`echo \` foo-?????? \''), ` foo-?????? ',
`no file', `created')
=>created
define(`file2', maketemp(`foo-XX'))dnl
define(`file3', mkstemp(`foo-XXXXXX'))dnl
ifelse(len(defn(`file1')), len(defn(`file2')),
`same length', `different')
=>same length
ifelse(defn(`file1'), defn(`file2'), `same', `different file')
=>different file
ifelse(defn(`file2'), defn(`file3'), `same', `different file')
=>different file
ifelse(defn(`file1'), defn(`file3'), `same', `different file')
=>different file
syscmd(`rm 'defn(`file1') defn(`file2') defn(`file3'))
=>
sysval
=>0
File: m4.info, Node: Miscellaneous, Next: Frozen files, Prev: Shell commands, Up: Top
14 Miscellaneous builtin macros
*******************************
This chapter describes various builtins, that do not really belong in
any of the previous chapters.
* Menu:
* Errprint:: Printing error messages
* Location:: Printing current location
* M4exit:: Exiting from `m4'
File: m4.info, Node: Errprint, Next: Location, Up: Miscellaneous
14.1 Printing error messages
============================
You can print error messages using `errprint':
-- Builtin: errprint (MESSAGE, ...)
Prints MESSAGE and the rest of the arguments to standard error,
separated by spaces. Standard error is used, regardless of the
`--debugfile' option (*note Invoking m4: Debugging options.).
The expansion of `errprint' is void. The macro `errprint' is
recognized only with parameters.
errprint(`Invalid arguments to forloop
')
error-->Invalid arguments to forloop
=>
errprint(`1')errprint(`2',`3
')
error-->12 3
=>
A trailing newline is _not_ printed automatically, so it should be
supplied as part of the argument, as in the example. Unfortunately, the
exact output of `errprint' is not very portable to other `m4'
implementations: POSIX requires that all arguments be printed, but some
implementations of `m4' only print the first. Furthermore, some BSD
implementations always append a newline for each `errprint' call,
regardless of whether the last argument already had one, and POSIX is
silent on whether this is acceptable.
File: m4.info, Node: Location, Next: M4exit, Prev: Errprint, Up: Miscellaneous
14.2 Printing current location
==============================
To make it possible to specify the location of an error, three utility
builtins exist:
-- Builtin: __file__
-- Builtin: __line__
-- Builtin: __program__
Expand to the quoted name of the current input file, the current
input line number in that file, and the quoted name of the current
invocation of `m4'.
errprint(__program__:__file__:__line__: `input error
')
error-->m4:stdin:1: input error
=>
Line numbers start at 1 for each file. If the file was found due to
the `-I' option or `M4PATH' environment variable, that is reflected in
the file name. The syncline option (`-s', *note Invoking m4:
Preprocessor features.), and the `f' and `l' flags of `debugmode'
(*note Debug Levels::), also use this notion of current file and line.
Redefining the three location macros has no effect on syncline, debug,
warning, or error message output.
This example reuses the file `incl.m4' mentioned earlier (*note
Include::):
$ m4 -I examples
define(`foo', ``$0' called at __file__:__line__')
=>
foo
=>foo called at stdin:2
include(`incl.m4')
=>Include file start
=>foo called at examples/incl.m4:2
=>Include file end
=>
The location of macros invoked during the rescanning of macro
expansion text corresponds to the location in the file where the
expansion was triggered, regardless of how many newline characters the
expansion text contains. As of GNU M4 1.4.8, the location of text
wrapped with `m4wrap' (*note M4wrap::) is the point at which the
`m4wrap' was invoked. Previous versions, however, behaved as though
wrapped text came from line 0 of the file "".
define(`echo', `$@')
=>
define(`foo', `echo(__line__
__line__)')
=>
echo(__line__
__line__)
=>4
=>5
m4wrap(`foo
')
=>
foo(errprint(__line__
__line__
))
error-->8
error-->9
=>8
=>8
__line__
=>11
m4wrap(`__line__
')
=>
^D
=>12
=>6
=>6
The `__program__' macro behaves like `$0' in shell terminology. If
you invoke `m4' through an absolute path or a link with a different
spelling, rather than by relying on a `PATH' search for plain `m4', it
will affect how `__program__' expands. The intent is that you can use
it to produce error messages with the same formatting that `m4'
produces internally. It can also be used within `syscmd' (*note
Syscmd::) to pick the same version of `m4' that is currently running,
rather than whatever version of `m4' happens to be first in `PATH'. It
was first introduced in GNU M4 1.4.6.
File: m4.info, Node: M4exit, Prev: Location, Up: Miscellaneous
14.3 Exiting from `m4'
======================
If you need to exit from `m4' before the entire input has been read,
you can use `m4exit':
-- Builtin: m4exit ([CODE = `0'])
Causes `m4' to exit, with exit status CODE. If CODE is left out,
the exit status is zero. If CODE cannot be parsed, or is outside
the range of 0 to 255, the exit status is one. No further input
is read, and all wrapped and diverted text is discarded.
m4wrap(`This text is lost due to `m4exit'.')
=>
divert(`1') So is this.
divert
=>
m4exit And this is never read.
A common use of this is to abort processing:
-- Composite: fatal_error (MESSAGE)
Abort processing with an error message and non-zero status. Prefix
MESSAGE with details about where the error occurred, and print the
resulting string to standard error.
define(`fatal_error',
`errprint(__program__:__file__:__line__`: fatal error: $*
')m4exit(`1')')
=>
fatal_error(`this is a BAD one, buster')
error-->m4:stdin:4: fatal error: this is a BAD one, buster
After this macro call, `m4' will exit with exit status 1. This macro
is only intended for error exits, since the normal exit procedures are
not followed, i.e., diverted text is not undiverted, and saved text
(*note M4wrap::) is not reread. (This macro could be made more robust
to earlier versions of `m4'. You should try to see if you can find
weaknesses and correct them; or *note Answers: Improved fatal_error.).
Note that it is still possible for the exit status to be different
than what was requested by `m4exit'. If `m4' detects some other error,
such as a write error on standard output, the exit status will be
non-zero even if `m4exit' requested zero.
If standard input is seekable, then the file will be positioned at
the next unread character. If it is a pipe or other non-seekable file,
then there are no guarantees how much data `m4' might have read into
buffers, and thus discarded.
File: m4.info, Node: Frozen files, Next: Compatibility, Prev: Miscellaneous, Up: Top
15 Fast loading of frozen state
*******************************
Some bigger `m4' applications may be built over a common base
containing hundreds of definitions and other costly initializations.
Usually, the common base is kept in one or more declarative files,
which files are listed on each `m4' invocation prior to the user's
input file, or else each input file uses `include'.
Reading the common base of a big application, over and over again,
may be time consuming. GNU `m4' offers some machinery to speed up the
start of an application using lengthy common bases.
* Menu:
* Using frozen files:: Using frozen files
* Frozen file format:: Frozen file format
File: m4.info, Node: Using frozen files, Next: Frozen file format, Up: Frozen files
15.1 Using frozen files
=======================
Suppose a user has a library of `m4' initializations in `base.m4',
which is then used with multiple input files:
$ m4 base.m4 input1.m4
$ m4 base.m4 input2.m4
$ m4 base.m4 input3.m4
Rather than spending time parsing the fixed contents of `base.m4'
every time, the user might rather execute:
$ m4 -F base.m4f base.m4
once, and further execute, as often as needed:
$ m4 -R base.m4f input1.m4
$ m4 -R base.m4f input2.m4
$ m4 -R base.m4f input3.m4
with the varying input. The first call, containing the `-F' option,
only reads and executes file `base.m4', defining various application
macros and computing other initializations. Once the input file
`base.m4' has been completely processed, GNU `m4' produces in
`base.m4f' a "frozen" file, that is, a file which contains a kind of
snapshot of the `m4' internal state.
Later calls, containing the `-R' option, are able to reload the
internal state of `m4', from `base.m4f', _prior_ to reading any other
input files. This means instead of starting with a virgin copy of
`m4', input will be read after having effectively recovered the effect
of a prior run. In our example, the effect is the same as if file
`base.m4' has been read anew. However, this effect is achieved a lot
faster.
Only one frozen file may be created or read in any one `m4'
invocation. It is not possible to recover two frozen files at once.
However, frozen files may be updated incrementally, through using `-R'
and `-F' options simultaneously. For example, if some care is taken,
the command:
$ m4 file1.m4 file2.m4 file3.m4 file4.m4
could be broken down in the following sequence, accumulating the same
output:
$ m4 -F file1.m4f file1.m4
$ m4 -R file1.m4f -F file2.m4f file2.m4
$ m4 -R file2.m4f -F file3.m4f file3.m4
$ m4 -R file3.m4f file4.m4
Some care is necessary because not every effort has been made for
this to work in all cases. In particular, the trace attribute of
macros is not handled, nor the current setting of `changeword'.
Currently, `m4wrap' and `sysval' also have problems. Also,
interactions for some options of `m4', being used in one call and not
in the next, have not been fully analyzed yet. On the other end, you
may be confident that stacks of `pushdef' definitions are handled
correctly, as well as undefined or renamed builtins, and changed
strings for quotes or comments. And future releases of GNU M4 will
improve on the utility of frozen files.
When an `m4' run is to be frozen, the automatic undiversion which
takes place at end of execution is inhibited. Instead, all positively
numbered diversions are saved into the frozen file. The active
diversion number is also transmitted.
A frozen file to be reloaded need not reside in the current
directory. It is looked up the same way as an `include' file (*note
Search Path::).
If the frozen file was generated with a newer version of `m4', and
contains directives that an older `m4' cannot parse, attempting to load
the frozen file with option `-R' will cause `m4' to exit with status 63
to indicate version mismatch.
File: m4.info, Node: Frozen file format, Prev: Using frozen files, Up: Frozen files
15.2 Frozen file format
=======================
Frozen files are sharable across architectures. It is safe to write a
frozen file on one machine and read it on another, given that the
second machine uses the same or newer version of GNU `m4'. It is
conventional, but not required, to give a frozen file the suffix of
`.m4f'.
These are simple (editable) text files, made up of directives, each
starting with a capital letter and ending with a newline (<NL>).
Wherever a directive is expected, the character `#' introduces a
comment line; empty lines are also ignored if they are not part of an
embedded string. In the following descriptions, each LEN refers to the
length of the corresponding strings STR in the next line of input.
Numbers are always expressed in decimal. There are no escape
characters. The directives are:
`C LEN1 , LEN2 <NL> STR1 STR2 <NL>'
Uses STR1 and STR2 as the begin-comment and end-comment strings.
If omitted, then `#' and <NL> are the comment delimiters.
`D NUMBER, LEN <NL> STR <NL>'
Selects diversion NUMBER, making it current, then copy STR in the
current diversion. NUMBER may be a negative number for a
non-existing diversion. To merely specify an active selection,
use this command with an empty STR. With 0 as the diversion
NUMBER, STR will be issued on standard output at reload time. GNU
`m4' will not produce the `D' directive with non-zero length for
diversion 0, but this can be done with manual edits. This
directive may appear more than once for the same diversion, in
which case the diversion is the concatenation of the various uses.
If omitted, then diversion 0 is current.
`F LEN1 , LEN2 <NL> STR1 STR2 <NL>'
Defines, through `pushdef', a definition for STR1 expanding to the
function whose builtin name is STR2. If the builtin does not
exist (for example, if the frozen file was produced by a copy of
`m4' compiled with changeword support, but the version of `m4'
reloading was compiled without it), the reload is silent, but any
subsequent use of the definition of STR1 will result in a warning.
This directive may appear more than once for the same name, and
its order, along with `T', is important. If omitted, you will
have no access to any builtins.
`Q LEN1 , LEN2 <NL> STR1 STR2 <NL>'
Uses STR1 and STR2 as the begin-quote and end-quote strings. If
omitted, then ``' and `'' are the quote delimiters.
`T LEN1 , LEN2 <NL> STR1 STR2 <NL>'
Defines, though `pushdef', a definition for STR1 expanding to the
text given by STR2. This directive may appear more than once for
the same name, and its order, along with `F', is important.
`V NUMBER <NL>'
Confirms the format of the file. `m4' 1.4.12 only creates and
understands frozen files where NUMBER is 1. This directive must
be the first non-comment in the file, and may not appear more than
once.
File: m4.info, Node: Compatibility, Next: Answers, Prev: Frozen files, Up: Top
16 Compatibility with other versions of `m4'
********************************************
This chapter describes the many of the differences between this
implementation of `m4', and of other implementations found under UNIX,
such as System V Release 3, Solaris, and BSD flavors. In particular,
it lists the known differences and extensions to POSIX. However, the
list is not necessarily comprehensive.
At the time of this writing, POSIX 2001 (also known as IEEE Std
1003.1-2001) is the latest standard, although a new version of POSIX is
under development and includes several proposals for modifying what
`m4' is required to do. The requirements for `m4' are shared between
SUSv3 and POSIX, and can be viewed at
`http://www.opengroup.org/onlinepubs/000095399/utilities/m4.html'.
* Menu:
* Extensions:: Extensions in GNU M4
* Incompatibilities:: Facilities in System V m4 not in GNU M4
* Other Incompatibilities:: Other incompatibilities
File: m4.info, Node: Extensions, Next: Incompatibilities, Up: Compatibility
16.1 Extensions in GNU M4
=========================
This version of `m4' contains a few facilities that do not exist in
System V `m4'. These extra facilities are all suppressed by using the
`-G' command line option (*note Invoking m4: Limits control.), unless
overridden by other command line options.
* In the `$N' notation for macro arguments, N can contain several
digits, while the System V `m4' only accepts one digit. This
allows macros in GNU `m4' to take any number of arguments, and not
only nine (*note Arguments::).
This means that `define(`foo', `$11')' is ambiguous between
implementations. To portably choose between grabbing the first
parameter and appending 1 to the expansion, or grabbing the
eleventh parameter, you can do the following:
define(`a1', `A1')
=>
dnl First argument, concatenated with 1
define(`_1', `$1')define(`first1', `_1($@)1')
=>
dnl Eleventh argument, portable
define(`_9', `$9')define(`eleventh', `_9(shift(shift($@)))')
=>
dnl Eleventh argument, GNU style
define(`Eleventh', `$11')
=>
first1(`a', `b', `c', `d', `e', `f', `g', `h', `i', `j', `k')
=>A1
eleventh(`a', `b', `c', `d', `e', `f', `g', `h', `i', `j', `k')
=>k
Eleventh(`a', `b', `c', `d', `e', `f', `g', `h', `i', `j', `k')
=>k
Also see the `argn' macro (*note Shift::).
* The `divert' (*note Divert::) macro can manage more than 9
diversions. GNU `m4' treats all positive numbers as valid
diversions, rather than discarding diversions greater than 9.
* Files included with `include' and `sinclude' are sought in a user
specified search path, if they are not found in the working
directory. The search path is specified by the `-I' option and the
`M4PATH' environment variable (*note Search Path::).
* Arguments to `undivert' can be non-numeric, in which case the named
file will be included uninterpreted in the output (*note
Undivert::).
* Formatted output is supported through the `format' builtin, which
is modeled after the C library function `printf' (*note Format::).
* Searches and text substitution through basic regular expressions
are supported by the `regexp' (*note Regexp::) and `patsubst'
(*note Patsubst::) builtins. Some BSD implementations use
extended regular expressions instead.
* The output of shell commands can be read into `m4' with `esyscmd'
(*note Esyscmd::).
* There is indirect access to any builtin macro with `builtin'
(*note Builtin::).
* Macros can be called indirectly through `indir' (*note Indir::).
* The name of the program, the current input file, and the current
input line number are accessible through the builtins
`__program__', `__file__', and `__line__' (*note Location::).
* The format of the output from `dumpdef' and macro tracing can be
controlled with `debugmode' (*note Debug Levels::).
* The destination of trace and debug output can be controlled with
`debugfile' (*note Debug Output::).
* The `maketemp' (*note Mkstemp::) macro behaves like `mkstemp',
creating a new file with a unique name on every invocation, rather
than following the insecure behavior of replacing the trailing `X'
characters with the `m4' process id.
* POSIX only requires support for the command line options `-s',
`-D', and `-U', so all other options accepted by GNU M4 are
extensions. *Note Invoking m4::, for a description of these
options.
The debugging and tracing facilities in GNU `m4' are much more
extensive than in most other versions of `m4'.
File: m4.info, Node: Incompatibilities, Next: Other Incompatibilities, Prev: Extensions, Up: Compatibility
16.2 Facilities in System V `m4' not in GNU `m4'
================================================
The version of `m4' from System V contains a few facilities that have
not been implemented in GNU `m4' yet. Additionally, POSIX requires
some behaviors that GNU `m4' has not implemented yet. Relying on these
behaviors is non-portable, as a future release of GNU `m4' may change.
* POSIX requires support for multiple arguments to `defn', without
any clarification on how `defn' behaves when one of the multiple
arguments names a builtin. System V `m4' and some other
implementations allow mixing builtins and text macros into a single
macro. GNU `m4' only supports joining multiple text arguments,
although a future implementation may lift this restriction to
behave more like System V. The only portable way to join text
macros with builtins is via helper macros and implicit
concatenation of macro results.
* POSIX requires an application to exit with non-zero status if it
wrote an error message to stderr. This has not yet been
consistently implemented for the various builtins that are
required to issue an error (such as `eval' (*note Eval::) when an
argument cannot be parsed).
* Some traditional implementations only allow reading standard input
once, but GNU `m4' correctly handles multiple instances of `-' on
the command line.
* POSIX requires `m4wrap' (*note M4wrap::) to act in FIFO (first-in,
first-out) order, but GNU `m4' currently uses LIFO order.
Furthermore, POSIX states that only the first argument to `m4wrap'
is saved for later evaluation, but GNU `m4' saves and processes
all arguments, with output separated by spaces.
* POSIX states that builtins that require arguments, but are called
without arguments, have undefined behavior. Traditional
implementations simply behave as though empty strings had been
passed. For example, `a`'define`'b' would expand to `ab'. But
GNU `m4' ignores certain builtins if they have missing arguments,
giving `adefineb' for the above example.
* Traditional implementations handle `define(`f',`1')' (*note
Define::) by undefining the entire stack of previous definitions,
and if doing `undefine(`f')' first. GNU `m4' replaces just the top
definition on the stack, as if doing `popdef(`f')' followed by
`pushdef(`f',`1')'. POSIX allows either behavior.
* POSIX 2001 requires `syscmd' (*note Syscmd::) to evaluate command
output for macro expansion, but this was a mistake that is
anticipated to be corrected in the next version of POSIX. GNU
`m4' follows traditional behavior in `syscmd' where output is not
rescanned, and provides the extension `esyscmd' that does scan the
output.
* At one point, POSIX required `changequote(ARG)' (*note
Changequote::) to use newline as the close quote, but this was a
bug, and the next version of POSIX is anticipated to state that
using empty strings or just one argument is unspecified.
Meanwhile, the GNU `m4' behavior of treating an empty end-quote
delimiter as `'' is not portable, as Solaris treats it as
repeating the start-quote delimiter, and BSD treats it as leaving
the previous end-quote delimiter unchanged. For predictable
results, never call changequote with just one argument, or with
empty strings for arguments.
* At one point, POSIX required `changecom(ARG,)' (*note Changecom::)
to make it impossible to end a comment, but this is a bug, and the
next version of POSIX is anticipated to state that using empty
strings is unspecified. Meanwhile, the GNU `m4' behavior of
treating an empty end-comment delimiter as newline is not
portable, as BSD treats it as leaving the previous end-comment
delimiter unchanged. It is also impossible in BSD implementations
to disable comments, even though that is required by POSIX. For
predictable results, never call changecom with empty strings for
arguments.
* Most implementations of `m4' give macros a higher precedence than
comments when parsing, meaning that if the start delimiter given to
`changecom' (*note Changecom::) starts with a macro name, comments
are effectively disabled. POSIX does not specify what the
precedence is, so this version of GNU `m4' parser recognizes
comments, then macros, then quoted strings.
* Traditional implementations allow argument collection, but not
string and comment processing, to span file boundaries. Thus, if
`a.m4' contains `len(', and `b.m4' contains `abc)', `m4 a.m4 b.m4'
outputs `3' with traditional `m4', but gives an error message that
the end of file was encountered inside a macro with GNU `m4'. On
the other hand, traditional implementations do end of file
processing for files included with `include' or `sinclude' (*note
Include::), while GNU `m4' seamlessly integrates the content of
those files. Thus `include(`a.m4')include(`b.m4')' will output
`3' instead of giving an error.
* Traditional `m4' treats `traceon' (*note Trace::) without
arguments as a global variable, independent of named macro tracing.
Also, once a macro is undefined, named tracing of that macro is
lost. On the other hand, when GNU `m4' encounters `traceon'
without arguments, it turns tracing on for all existing
definitions at the time, but does not trace future definitions;
`traceoff' without arguments turns tracing off for all definitions
regardless of whether they were also traced by name; and tracing
by name, such as with `-tfoo' at the command line or
`traceon(`foo')' in the input, is an attribute that is preserved
even if the macro is currently undefined.
Additionally, while POSIX requires trace output, it makes no
demands on the formatting of that output. Parsing trace output is
not guaranteed to be reliable, even between different releases of
GNU M4; however, the intent is that any future changes in trace
output will only occur under the direction of additional
`debugmode' flags (*note Debug Levels::).
* POSIX requires `eval' (*note Eval::) to treat all operators with
the same precedence as C. However, earlier versions of GNU `m4'
followed the traditional behavior of other `m4' implementations,
where bitwise and logical negation (`~' and `!') have lower
precedence than equality operators; and where equality operators
(`==' and `!=') had the same precedence as relational operators
(such as `<'). Use explicit parentheses to ensure proper
precedence. As extensions to POSIX, GNU `m4' gives well-defined
semantics to operations that C leaves undefined, such as when
overflow occurs, when shifting negative numbers, or when
performing division by zero. POSIX also requires `=' to cause an
error, but many traditional implementations allowed it as an alias
for `=='.
* POSIX 2001 requires `translit' (*note Translit::) to treat each
character of the second and third arguments literally. However,
it is anticipated that the next version of POSIX will allow the
GNU `m4' behavior of treating `-' as a range operator.
* POSIX requires `m4' to honor the locale environment variables of
`LANG', `LC_ALL', `LC_CTYPE', `LC_MESSAGES', and `NLSPATH', but
this has not yet been implemented in GNU `m4'.
* POSIX states that only unquoted leading newlines and blanks (that
is, space and tab) are ignored when collecting macro arguments.
However, this appears to be a bug in POSIX, since most traditional
implementations also ignore all whitespace (formfeed, carriage
return, and vertical tab). GNU `m4' follows tradition and ignores
all leading unquoted whitespace.
* A strictly-compliant POSIX client is not allowed to use
command-line arguments not specified by POSIX. However, since
this version of M4 ignores `POSIXLY_CORRECT' and enables the option
`--gnu' by default (*note Invoking m4: Limits control.), a client
desiring to be strictly compliant has no way to disable GNU
extensions that conflict with POSIX when directly invoking the
compiled `m4'. A future version of `GNU' M4 will honor the
environment variable `POSIXLY_CORRECT', implicitly enabling
`--traditional' if it is set, in order to allow a
strictly-compliant client. In the meantime, a client needing
strict POSIX compliance can use the workaround of invoking a shell
script wrapper, where the wrapper then adds `--traditional' to the
arguments passed to the compiled `m4'.
File: m4.info, Node: Other Incompatibilities, Prev: Incompatibilities, Up: Compatibility
16.3 Other incompatibilities
============================
There are a few other incompatibilities between this implementation of
`m4', and the System V version.
* GNU `m4' implements sync lines differently from System V `m4',
when text is being diverted. GNU `m4' outputs the sync lines when
the text is being diverted, and System V `m4' when the diverted
text is being brought back.
The problem is which lines and file names should be attached to
text that is being, or has been, diverted. System V `m4' regards
all the diverted text as being generated by the source line
containing the `undivert' call, whereas GNU `m4' regards the
diverted text as being generated at the time it is diverted.
The sync line option is used mostly when using `m4' as a front end
to a compiler. If a diverted line causes a compiler error, the
error messages should most probably refer to the place where the
diversion was made, and not where it was inserted again.
divert(2)2
divert(1)1
divert`'0
=>#line 3 "stdin"
=>0
^D
=>#line 2 "stdin"
=>1
=>#line 1 "stdin"
=>2
The current `m4' implementation has a limitation that the syncline
output at the start of each diversion occurs no matter what, even
if the previous diversion did not end with a newline. This goes
contrary to the claim that synclines appear on a line by
themselves, so this limitation may be corrected in a future
version of `m4'. In the meantime, when using `-s', it is wisest
to make sure all diversions end with newline.
* GNU `m4' makes no attempt at prohibiting self-referential
definitions like:
define(`x', `x')
=>
define(`x', `x ')
=>
There is nothing inherently wrong with defining `x' to return `x'.
The wrong thing is to expand `x' unquoted, because that would
cause an infinite rescan loop. In `m4', one might use macros to
hold strings, as we do for variables in other programming
languages, further checking them with:
ifelse(defn(`HOLDER'), `VALUE', ...)
In cases like this one, an interdiction for a macro to hold its
own name would be a useless limitation. Of course, this leaves
more rope for the GNU `m4' user to hang himself! Rescanning hangs
may be avoided through careful programming, a little like for
endless loops in traditional programming languages.
File: m4.info, Node: Answers, Next: Copying This Package, Prev: Compatibility, Up: Top
17 Correct version of some examples
***********************************
Some of the examples in this manuals are buggy or not very robust, for
demonstration purposes. Improved versions of these composite macros are
presented here.
* Menu:
* Improved exch:: Solution for `exch'
* Improved forloop:: Solution for `forloop'
* Improved foreach:: Solution for `foreach'
* Improved m4wrap:: Solution for `m4wrap'
* Improved cleardivert:: Solution for `cleardivert'
* Improved capitalize:: Solution for `capitalize'
* Improved fatal_error:: Solution for `fatal_error'
File: m4.info, Node: Improved exch, Next: Improved forloop, Up: Answers
17.1 Solution for `exch'
========================
The `exch' macro (*note Arguments::) as presented requires clients to
double quote their arguments. A nicer definition, which lets clients
follow the rule of thumb of one level of quoting per level of
parentheses, involves adding quotes in the definition of `exch', as
follows:
define(`exch', ``$2', `$1'')
=>
define(exch(`expansion text', `macro'))
=>
macro
=>expansion text
File: m4.info, Node: Improved forloop, Next: Improved foreach, Prev: Improved exch, Up: Answers
17.2 Solution for `forloop'
===========================
The `forloop' macro (*note Forloop::) as presented earlier can go into
an infinite loop if given an iterator that is not parsed as a macro
name. It does not do any sanity checking on its numeric bounds, and
only permits decimal numbers for bounds. Here is an improved version,
shipped as `m4-1.4.12/examples/forloop2.m4'; this version also
optimizes overhead by calling four macros instead of six per iteration
(excluding those in TEXT), by not dereferencing the ITERATOR in the
helper `_forloop'.
$ m4 -d -I examples
undivert(`forloop2.m4')dnl
=>divert(`-1')
=># forloop(var, from, to, stmt) - improved version:
=># works even if VAR is not a strict macro name
=># performs sanity check that FROM is larger than TO
=># allows complex numerical expressions in TO and FROM
=>define(`forloop', `ifelse(eval(`($2) <= ($3)'), `1',
=> `pushdef(`$1')_$0(`$1', eval(`$2'),
=> eval(`$3'), `$4')popdef(`$1')')')
=>define(`_forloop',
=> `define(`$1', `$2')$4`'ifelse(`$2', `$3', `',
=> `$0(`$1', incr(`$2'), `$3', `$4')')')
=>divert`'dnl
include(`forloop2.m4')
=>
forloop(`i', `2', `1', `no iteration occurs')
=>
forloop(`', `1', `2', ` odd iterator name')
=> odd iterator name odd iterator name
forloop(`i', `5 + 5', `0xc', ` 0x`'eval(i, `16')')
=> 0xa 0xb 0xc
forloop(`i', `a', `b', `non-numeric bounds')
error-->m4:stdin:6: bad expression in eval (bad input): (a) <= (b)
=>
One other change to notice is that the improved version used `_$0'
rather than `_foreach' to invoke the helper routine. In general, this
is a good practice to follow, because then the set of macros can be
uniformly transformed. The following example shows a transformation
that doubles the current quoting and appends a suffix `2' to each
transformed macro. If `foreach' refers to the literal `_foreach', then
`foreach2' invokes `_foreach' instead of the intended `_foreach2', and
the mixing of quoting paradigms leads to an infinite recursion loop in
this example.
$ m4 -d -L 9 -I examples
define(`arg1', `$1')include(`forloop2.m4')include(`quote.m4')
=>
define(`double', `define(`$1'`2',
arg1(patsubst(dquote(defn(`$1')), `[`']', `\&\&')))')
=>
double(`forloop')double(`_forloop')defn(`forloop2')
=>ifelse(eval(``($2) <= ($3)''), ``1'',
=> ``pushdef(``$1'')_$0(``$1'', eval(``$2''),
=> eval(``$3''), ``$4'')popdef(``$1'')'')
forloop(i, 1, 5, `ifelse(')forloop(i, 1, 5, `)')
=>
changequote(`[', `]')changequote([``], [''])
=>
forloop2(i, 1, 5, ``ifelse('')forloop2(i, 1, 5, ``)'')
=>
changequote`'include(`forloop.m4')
=>
double(`forloop')double(`_forloop')defn(`forloop2')
=>pushdef(``$1'', ``$2'')_forloop($@)popdef(``$1'')
forloop(i, 1, 5, `ifelse(')forloop(i, 1, 5, `)')
=>
changequote(`[', `]')changequote([``], [''])
=>
forloop2(i, 1, 5, ``ifelse('')forloop2(i, 1, 5, ``)'')
error-->m4:stdin:12: recursion limit of 9 exceeded, use -L<N> to change it
Of course, it is possible to make even more improvements, such as
adding an optional step argument, or allowing iteration through
descending sequences. GNU Autoconf provides some of these additional
bells and whistles in its `m4_for' macro.
File: m4.info, Node: Improved foreach, Next: Improved m4wrap, Prev: Improved forloop, Up: Answers
17.3 Solution for `foreach'
===========================
The `foreach' and `foreachq' macros (*note Foreach::) as presented
earlier each have flaws. First, we will examine and fix the quadratic
behavior of `foreachq':
$ m4 -I examples
include(`foreachq.m4')
=>
traceon(`shift')debugmode(`aq')
=>
foreachq(`x', ``1', `2', `3', `4'', `x
')dnl
=>1
error-->m4trace: -3- shift(`1', `2', `3', `4')
error-->m4trace: -2- shift(`1', `2', `3', `4')
=>2
error-->m4trace: -4- shift(`1', `2', `3', `4')
error-->m4trace: -3- shift(`2', `3', `4')
error-->m4trace: -3- shift(`1', `2', `3', `4')
error-->m4trace: -2- shift(`2', `3', `4')
=>3
error-->m4trace: -5- shift(`1', `2', `3', `4')
error-->m4trace: -4- shift(`2', `3', `4')
error-->m4trace: -3- shift(`3', `4')
error-->m4trace: -4- shift(`1', `2', `3', `4')
error-->m4trace: -3- shift(`2', `3', `4')
error-->m4trace: -2- shift(`3', `4')
=>4
error-->m4trace: -6- shift(`1', `2', `3', `4')
error-->m4trace: -5- shift(`2', `3', `4')
error-->m4trace: -4- shift(`3', `4')
error-->m4trace: -3- shift(`4')
Each successive iteration was adding more quoted `shift'
invocations, and the entire list contents were passing through every
iteration. In general, when recursing, it is a good idea to make the
recursion use fewer arguments, rather than adding additional quoted
uses of `shift'. By doing so, `m4' uses less memory, invokes fewer
macros, is less likely to run into machine limits, and most
importantly, performs faster. The fixed version of `foreachq' can be
found in `m4-1.4.12/examples/foreachq2.m4':
$ m4 -I examples
include(`foreachq2.m4')
=>
undivert(`foreachq2.m4')dnl
=>include(`quote.m4')dnl
=>divert(`-1')
=># foreachq(x, `item_1, item_2, ..., item_n', stmt)
=># quoted list, improved version
=>define(`foreachq', `pushdef(`$1')_$0($@)popdef(`$1')')
=>define(`_arg1q', ``$1'')
=>define(`_rest', `ifelse(`$#', `1', `', `dquote(shift($@))')')
=>define(`_foreachq', `ifelse(`$2', `', `',
=> `define(`$1', _arg1q($2))$3`'$0(`$1', _rest($2), `$3')')')
=>divert`'dnl
traceon(`shift')debugmode(`aq')
=>
foreachq(`x', ``1', `2', `3', `4'', `x
')dnl
=>1
error-->m4trace: -3- shift(`1', `2', `3', `4')
=>2
error-->m4trace: -3- shift(`2', `3', `4')
=>3
error-->m4trace: -3- shift(`3', `4')
=>4
Note that the fixed version calls unquoted helper macros in
`_foreachq' to trim elements immediately; those helper macros in turn
must re-supply the layer of quotes lost in the macro invocation.
Contrast the use of `_arg1q', which quotes the first list element, with
`_arg1' of the earlier implementation that returned the first list
element directly. Additionally, by calling the helper method
immediately, the `defn(`ITERATOR')' no longer contains unexpanded
macros.
The astute m4 programmer might notice that the solution above still
uses more memory and macro invocations, and thus more time, than
strictly necessary. Note that `$2', which contains an arbitrarily long
quoted list, is expanded and rescanned three times per iteration of
`_foreachq'. Furthermore, every iteration of the algorithm effectively
unboxes then reboxes the list, which costs a couple of macro
invocations. It is possible to rewrite the algorithm for a bit more
speed by swapping the order of the arguments to `_foreachq' in order to
operate on an unboxed list in the first place, and by using the
fixed-length `$#' instead of an arbitrary length list as the key to end
recursion. The result is an overhead of six macro invocations per loop
(excluding any macros in TEXT), instead of eight. This alternative
approach is available as `m4-1.4.12/examples/foreach3.m4':
$ m4 -I examples
include(`foreachq3.m4')
=>
undivert(`foreachq3.m4')dnl
=>divert(`-1')
=># foreachq(x, `item_1, item_2, ..., item_n', stmt)
=># quoted list, alternate improved version
=>define(`foreachq', `ifelse(`$2', `', `',
=> `pushdef(`$1')_$0(`$1', `$3', `', $2)popdef(`$1')')')
=>define(`_foreachq', `ifelse(`$#', `3', `',
=> `define(`$1', `$4')$2`'$0(`$1', `$2',
=> shift(shift(shift($@))))')')
=>divert`'dnl
traceon(`shift')debugmode(`aq')
=>
foreachq(`x', ``1', `2', `3', `4'', `x
')dnl
=>1
error-->m4trace: -4- shift(`x', `x
error-->', `', `1', `2', `3', `4')
error-->m4trace: -3- shift(`x
error-->', `', `1', `2', `3', `4')
error-->m4trace: -2- shift(`', `1', `2', `3', `4')
=>2
error-->m4trace: -4- shift(`x', `x
error-->', `1', `2', `3', `4')
error-->m4trace: -3- shift(`x
error-->', `1', `2', `3', `4')
error-->m4trace: -2- shift(`1', `2', `3', `4')
=>3
error-->m4trace: -4- shift(`x', `x
error-->', `2', `3', `4')
error-->m4trace: -3- shift(`x
error-->', `2', `3', `4')
error-->m4trace: -2- shift(`2', `3', `4')
=>4
error-->m4trace: -4- shift(`x', `x
error-->', `3', `4')
error-->m4trace: -3- shift(`x
error-->', `3', `4')
error-->m4trace: -2- shift(`3', `4')
In the current version of M4, every instance of `$@' is rescanned as
it is encountered. Thus, the `foreachq3.m4' alternative uses much less
memory than `foreachq2.m4', and executes as much as 10% faster, since
each iteration encounters fewer `$@'. However, the implementation of
rescanning every byte in `$@' is quadratic in the number of bytes
scanned (for example, making the broken version in `foreachq.m4' cubic,
rather than quadratic, in behavior). A future release of M4 will
improve the underlying implementation by reusing results of previous
scans, so that both styles of `foreachq' can become linear in the
number of bytes scanned. Notice how the implementation injects an
empty argument prior to expanding `$2' within `foreachq'; the helper
macro `_foreachq' then ignores the third argument altogether, and ends
recursion when there are three arguments left because there was nothing
left to pass through `shift'. Thus, each iteration only needs one
`ifelse', rather than the two conditionals used in the version from
`foreachq2.m4'.
So far, all of the implementations of `foreachq' presented have been
quadratic with M4 1.4.x. But `forloop' is linear, because each
iteration parses a constant amount of arguments. So, it is possible to
design a variant that uses `forloop' to do the iteration, then uses
`$@' only once at the end, giving a linear result even with older M4
implementations. This implementation relies on the GNU extension that
`$10' expands to the tenth argument rather than the first argument
concatenated with `0'. The trick is to define an intermediate macro
that repeats the text `m4_define(`$1', `$N')$2`'', with `n' set to
successive integers corresponding to each argument. The helper macro
`_foreachq_' is needed in order to generate the literal sequences such
as `$1' into the intermediate macro, rather than expanding them as the
arguments of `_foreachq'. With this approach, no `shift' calls are
even needed! Even though there are seven macros of overhead per
iteration instead of six in `foreachq3.m4', the linear scaling is
apparent at relatively small list sizes. However, this approach will
need adjustment when a future version of M4 follows POSIX by no longer
treating `$10' as the tenth argument; the anticipation is that `${10}'
can be used instead, although that alternative syntax is not yet
supported.
$ m4 -I examples
include(`foreachq4.m4')
=>
undivert(`foreachq4.m4')dnl
=>include(`forloop2.m4')dnl
=>divert(`-1')
=># foreachq(x, `item_1, item_2, ..., item_n', stmt)
=># quoted list, version based on forloop
=>define(`foreachq',
=>`ifelse(`$2', `', `', `_$0(`$1', `$3', $2)')')
=>define(`_foreachq',
=>`pushdef(`$1', forloop(`$1', `3', `$#',
=> `$0_(`1', `2', indir(`$1'))')`popdef(
=> `$1')')indir(`$1', $@)')
=>define(`_foreachq_',
=>``define(`$$1', `$$3')$$2`''')
=>divert`'dnl
traceon(`shift')debugmode(`aq')
=>
foreachq(`x', ``1', `2', `3', `4'', `x
')dnl
=>1
=>2
=>3
=>4
For yet another approach, the improved version of `foreach',
available in `m4-1.4.12/examples/foreach2.m4', simply overquotes the
arguments to `_foreach' to begin with, using `dquote_elt'. Then
`_foreach' can just use `_arg1' to remove the extra layer of quoting
that was added up front:
$ m4 -I examples
include(`foreach2.m4')
=>
undivert(`foreach2.m4')dnl
=>include(`quote.m4')dnl
=>divert(`-1')
=># foreach(x, (item_1, item_2, ..., item_n), stmt)
=># parenthesized list, improved version
=>define(`foreach', `pushdef(`$1')_$0(`$1',
=> (dquote(dquote_elt$2)), `$3')popdef(`$1')')
=>define(`_arg1', `$1')
=>define(`_foreach', `ifelse(`$2', `(`')', `',
=> `define(`$1', _arg1$2)$3`'$0(`$1', (dquote(shift$2)), `$3')')')
=>divert`'dnl
traceon(`shift')debugmode(`aq')
=>
foreach(`x', `(`1', `2', `3', `4')', `x
')dnl
error-->m4trace: -4- shift(`1', `2', `3', `4')
error-->m4trace: -4- shift(`2', `3', `4')
error-->m4trace: -4- shift(`3', `4')
=>1
error-->m4trace: -3- shift(``1'', ``2'', ``3'', ``4'')
=>2
error-->m4trace: -3- shift(``2'', ``3'', ``4'')
=>3
error-->m4trace: -3- shift(``3'', ``4'')
=>4
error-->m4trace: -3- shift(``4'')
It is likewise possible to write a variant of `foreach' that
performs in linear time on M4 1.4.x; the easiest method is probably
writing a version of `foreach' that unboxes its list, then invokes
`_foreachq' as previously defined in `foreachq4.m4'.
In summary, recursion over list elements is trickier than it
appeared at first glance, but provides a powerful idiom within `m4'
processing. As a final demonstration, both list styles are now able to
handle several scenarios that would wreak havoc on one or both of the
original implementations. This points out one other difference between
the list styles. `foreach' evaluates unquoted list elements only once,
in preparation for calling `_foreach', similary for `foreachq' as
provided by `foreachq3.m4' or `foreachq4.m4'. But `foreachq', as
provided by `foreachq2.m4', evaluates unquoted list elements twice
while visiting the first list element, once in `_arg1q' and once in
`_rest'. When deciding which list style to use, one must take into
account whether repeating the side effects of unquoted list elements
will have any detrimental effects.
$ m4 -I examples
include(`foreach2.m4')
=>
include(`foreachq2.m4')
=>
dnl 0-element list:
foreach(`x', `', `<x>') / foreachq(`x', `', `<x>')
=> /
dnl 1-element list of empty element
foreach(`x', `()', `<x>') / foreachq(`x', ``'', `<x>')
=><> / <>
dnl 2-element list of empty elements
foreach(`x', `(`',`')', `<x>') / foreachq(`x', ``',`'', `<x>')
=><><> / <><>
dnl 1-element list of a comma
foreach(`x', `(`,')', `<x>') / foreachq(`x', ``,'', `<x>')
=><,> / <,>
dnl 2-element list of unbalanced parentheses
foreach(`x', `(`(', `)')', `<x>') / foreachq(`x', ``(', `)'', `<x>')
=><(><)> / <(><)>
define(`ab', `oops')dnl using defn(`iterator')
foreach(`x', `(`a', `b')', `defn(`x')') /dnl
foreachq(`x', ``a', `b'', `defn(`x')')
=>ab / ab
define(`active', `ACT, IVE')
=>
traceon(`active')
=>
dnl list of unquoted macros; expansion occurs before recursion
foreach(`x', `(active, active)', `<x>
')dnl
error-->m4trace: -4- active -> `ACT, IVE'
error-->m4trace: -4- active -> `ACT, IVE'
=><ACT>
=><IVE>
=><ACT>
=><IVE>
foreachq(`x', `active, active', `<x>
')dnl
error-->m4trace: -3- active -> `ACT, IVE'
error-->m4trace: -3- active -> `ACT, IVE'
=><ACT>
error-->m4trace: -3- active -> `ACT, IVE'
error-->m4trace: -3- active -> `ACT, IVE'
=><IVE>
=><ACT>
=><IVE>
dnl list of quoted macros; expansion occurs during recursion
foreach(`x', `(`active', `active')', `<x>
')dnl
error-->m4trace: -1- active -> `ACT, IVE'
=><ACT, IVE>
error-->m4trace: -1- active -> `ACT, IVE'
=><ACT, IVE>
foreachq(`x', ``active', `active'', `<x>
')dnl
error-->m4trace: -1- active -> `ACT, IVE'
=><ACT, IVE>
error-->m4trace: -1- active -> `ACT, IVE'
=><ACT, IVE>
dnl list of double-quoted macro names; no expansion
foreach(`x', `(``active'', ``active'')', `<x>
')dnl
=><active>
=><active>
foreachq(`x', ```active'', ``active''', `<x>
')dnl
=><active>
=><active>
File: m4.info, Node: Improved m4wrap, Next: Improved cleardivert, Prev: Improved foreach, Up: Answers
17.4 Solution for `m4wrap'
==========================
The replacement `m4wrap' versions presented above, designed to
guarantee FIFO or LIFO order regardless of the underlying M4
implementation, share a bug when dealing with wrapped text that looks
like parameter expansion. Note how the invocation of `m4wrapN'
interprets these parameters, while using the builtin preserves them for
their intended use.
$ m4 -I examples
include(`wraplifo.m4')
=>
m4wrap(`define(`foo', ``$0:'-$1-$*-$#-')foo(`a', `b')
')
=>
builtin(`m4wrap', ``'define(`bar', ``$0:'-$1-$*-$#-')bar(`a', `b')
')
=>
^D
=>bar:-a-a,b-2-
=>m4wrap0:---0-
Additionally, the computation of `_m4wrap_level' and creation of
multiple `m4wrapN' placeholders in the original examples is more
expensive in time and memory than strictly necessary. Notice how the
improved version grabs the wrapped text via `defn' to avoid parameter
expansion, then undefines `_m4wrap_text', before stripping a level of
quotes with `_arg1' to expand the text. That way, each level of
wrapping reuses the single placeholder, which starts each nesting level
in an undefined state.
Finally, it is worth emulating the GNU M4 extension of saving all
arguments to `m4wrap', separated by a space, rather than saving just
the first argument. This is done with the `join' macro documented
previously (*note Shift::). The improved LIFO example is shipped as
`m4-1.4.12/examples/wraplifo2.m4', and can easily be converted to a
FIFO solution by swapping the adjacent invocations of `joinall' and
`defn'.
$ m4 -I examples
include(`wraplifo2.m4')
=>
undivert(`wraplifo2.m4')dnl
=>dnl Redefine m4wrap to have LIFO semantics, improved example.
=>include(`join.m4')dnl
=>define(`_m4wrap', defn(`m4wrap'))dnl
=>define(`_arg1', `$1')dnl
=>define(`m4wrap',
=>`ifdef(`_$0_text',
=> `define(`_$0_text', joinall(` ', $@)defn(`_$0_text'))',
=> `_$0(`_arg1(defn(`_$0_text')undefine(`_$0_text'))')dnl
=>define(`_$0_text', joinall(` ', $@))')')dnl
m4wrap(`define(`foo', ``$0:'-$1-$*-$#-')foo(`a', `b')
')
=>
m4wrap(`lifo text
m4wrap(`nested', `', `$@
')')
=>
^D
=>lifo text
=>foo:-a-a,b-2-
=>nested $@
File: m4.info, Node: Improved cleardivert, Next: Improved capitalize, Prev: Improved m4wrap, Up: Answers
17.5 Solution for `cleardivert'
===============================
The `cleardivert' macro (*note Cleardivert::) cannot, as it stands, be
called without arguments to clear all pending diversions. That is
because using undivert with an empty string for an argument is different
than using it with no arguments at all. Compare the earlier definition
with one that takes the number of arguments into account:
define(`cleardivert',
`pushdef(`_n', divnum)divert(`-1')undivert($@)divert(_n)popdef(`_n')')
=>
divert(`1')one
divert
=>
cleardivert
=>
undivert
=>one
=>
define(`cleardivert',
`pushdef(`_num', divnum)divert(`-1')ifelse(`$#', `0',
`undivert`'', `undivert($@)')divert(_num)popdef(`_num')')
=>
divert(`2')two
divert
=>
cleardivert
=>
undivert
=>
File: m4.info, Node: Improved capitalize, Next: Improved fatal_error, Prev: Improved cleardivert, Up: Answers
17.6 Solution for `capitalize'
==============================
The `capitalize' macro (*note Patsubst::) as presented earlier does not
allow clients to follow the quoting rule of thumb. Consider the three
macros `active', `Active', and `ACTIVE', and the difference between
calling `capitalize' with the expansion of a macro, expanding the
result of a case change, and changing the case of a double-quoted
string:
$ m4 -I examples
include(`capitalize.m4')dnl
define(`active', `act1, ive')dnl
define(`Active', `Act2, Ive')dnl
define(`ACTIVE', `ACT3, IVE')dnl
upcase(active)
=>ACT1,IVE
upcase(`active')
=>ACT3, IVE
upcase(``active'')
=>ACTIVE
downcase(ACTIVE)
=>act3,ive
downcase(`ACTIVE')
=>act1, ive
downcase(``ACTIVE'')
=>active
capitalize(active)
=>Act1
capitalize(`active')
=>Active
capitalize(``active'')
=>_capitalize(`active')
define(`A', `OOPS')
=>
capitalize(active)
=>OOPSct1
capitalize(`active')
=>OOPSctive
First, when `capitalize' is called with more than one argument, it
was throwing away later arguments, whereas `upcase' and `downcase' used
`$*' to collect them all. The fix is simple: use `$*' consistently.
Next, with single-quoting, `capitalize' outputs a single character,
a set of quotes, then the rest of the characters, making it impossible
to invoke `Active' after the fact, and allowing the alternate macro `A'
to interfere. Here, the solution is to use additional quoting in the
helper macros, then pass the final over-quoted output string through
`_arg1' to remove the extra quoting and finally invoke the concatenated
portions as a single string.
Finally, when passed a double-quoted string, the nested macro
`_capitalize' is never invoked because it ended up nested inside
quotes. This one is the toughest to fix. In short, we have no idea how
many levels of quotes are in effect on the substring being altered by
`patsubst'. If the replacement string cannot be expressed entirely in
terms of literal text and backslash substitutions, then we need a
mechanism to guarantee that the helper macros are invoked outside of
quotes. In other words, this sounds like a job for `changequote'
(*note Changequote::). By changing the active quoting characters, we
can guarantee that replacement text injected by `patsubst' always
occurs in the middle of a string that has exactly one level of
over-quoting using alternate quotes; so the replacement text closes the
quoted string, invokes the helper macros, then reopens the quoted
string. In turn, that means the replacement text has unbalanced quotes,
necessitating another round of `changequote'.
In the fixed version below, (also shipped as
`m4-1.4.12/examples/capitalize.m4'), `capitalize' uses the alternate
quotes of `<<[' and `]>>' (the longer strings are chosen so as to be
less likely to appear in the text being converted). The helpers
`_to_alt' and `_from_alt' merely reduce the number of characters
required to perform a `changequote', since the definition changes
twice. The outermost pair means that `patsubst' and `_capitalize_alt'
are invoked with alternate quoting; the innermost pair is used so that
the third argument to `patsubst' can contain an unbalanced `]>>'/`<<['
pair. Note that `upcase' and `downcase' must be redefined as
`_upcase_alt' and `_downcase_alt', since they contain nested quotes but
are invoked with the alternate quoting scheme in effect.
$ m4 -I examples
include(`capitalize2.m4')dnl
define(`active', `act1, ive')dnl
define(`Active', `Act2, Ive')dnl
define(`ACTIVE', `ACT3, IVE')dnl
define(`A', `OOPS')dnl
capitalize(active; `active'; ``active''; ```actIVE''')
=>Act1,Ive; Act2, Ive; Active; `Active'
undivert(`capitalize2.m4')dnl
=>divert(`-1')
=># upcase(text)
=># downcase(text)
=># capitalize(text)
=># change case of text, improved version
=>define(`upcase', `translit(`$*', `a-z', `A-Z')')
=>define(`downcase', `translit(`$*', `A-Z', `a-z')')
=>define(`_arg1', `$1')
=>define(`_to_alt', `changequote(`<<[', `]>>')')
=>define(`_from_alt', `changequote(<<[`]>>, <<[']>>)')
=>define(`_upcase_alt', `translit(<<[$*]>>, <<[a-z]>>, <<[A-Z]>>)')
=>define(`_downcase_alt', `translit(<<[$*]>>, <<[A-Z]>>, <<[a-z]>>)')
=>define(`_capitalize_alt',
=> `regexp(<<[$1]>>, <<[^\(\w\)\(\w*\)]>>,
=> <<[_upcase_alt(<<[<<[\1]>>]>>)_downcase_alt(<<[<<[\2]>>]>>)]>>)')
=>define(`capitalize',
=> `_arg1(_to_alt()patsubst(<<[<<[$*]>>]>>, <<[\w+]>>,
=> _from_alt()`]>>_$0_alt(<<[\&]>>)<<['_to_alt())_from_alt())')
=>divert`'dnl
File: m4.info, Node: Improved fatal_error, Prev: Improved capitalize, Up: Answers
17.7 Solution for `fatal_error'
===============================
The `fatal_error' macro (*note M4exit::) is not robust to versions of
GNU M4 earlier than 1.4.8, where invoking `__file__' (*note Location::)
inside `m4wrap' would result in an empty string, and `__line__'
resulted in `0' even though all files start at line 1. Furthermore,
versions earlier than 1.4.6 did not support the `__program__' macro.
If you want `fatal_error' to work across the entire 1.4.x release
series, a better implementation would be:
define(`fatal_error',
`errprint(ifdef(`__program__', `__program__', ``m4'')'dnl
`:ifelse(__line__, `0', `',
`__file__:__line__:')` fatal error: $*
')m4exit(`1')')
=>
m4wrap(`divnum(`demo of internal message')
fatal_error(`inside wrapped text')')
=>
^D
error-->m4:stdin:6: Warning: excess arguments to builtin `divnum' ignored
=>0
error-->m4:stdin:6: fatal error: inside wrapped text
File: m4.info, Node: Copying This Package, Next: Copying This Manual, Prev: Answers, Up: Top
Appendix A How to make copies of the overall M4 package
*******************************************************
This appendix covers the license for copying the source code of the
overall M4 package. This manual is under a different set of
restrictions, covered later (*note Copying This Manual::).
* Menu:
* GNU General Public License:: License for copying the M4 package
File: m4.info, Node: GNU General Public License, Up: Copying This Package
A.1 License for copying the M4 package
======================================
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. `http://fsf.org/'
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
Preamble
========
The GNU General Public License is a free, copyleft license for software
and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains
free software for all its users. We, the Free Software Foundation, use
the GNU General Public License for most of our software; it applies
also to any other work released this way by its authors. You can apply
it to your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you
have certain responsibilities if you distribute copies of the software,
or if you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the
manufacturer can do so. This is fundamentally incompatible with the
aim of protecting users' freedom to change the software. The
systematic pattern of such abuse occurs in the area of products for
individuals to use, which is precisely where it is most unacceptable.
Therefore, we have designed this version of the GPL to prohibit the
practice for those products. If such problems arise substantially in
other domains, we stand ready to extend this provision to those domains
in future versions of the GPL, as needed to protect the freedom of
users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
====================
0. Definitions.
"This License" refers to version 3 of the GNU General Public
License.
"Copyright" also means copyright-like laws that apply to other
kinds of works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the
work in a fashion requiring copyright permission, other than the
making of an exact copy. The resulting work is called a "modified
version" of the earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work
based on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it
on a computer or modifying a private copy. Propagation includes
copying, distribution (with or without modification), making
available to the public, and in some countries other activities as
well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user
through a computer network, with no transfer of a copy, is not
conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to
the extent that warranties are provided), that licensees may
convey the work under this License, and how to view a copy of this
License. If the interface presents a list of user commands or
options, such as a menu, a prominent item in the list meets this
criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any
non-source form of a work.
A "Standard Interface" means an interface that either is an
official standard defined by a recognized standards body, or, in
the case of interfaces specified for a particular programming
language, one that is widely used among developers working in that
language.
The "System Libraries" of an executable work include anything,
other than the work as a whole, that (a) is included in the normal
form of packaging a Major Component, but which is not part of that
Major Component, and (b) serves only to enable use of the work
with that Major Component, or to implement a Standard Interface
for which an implementation is available to the public in source
code form. A "Major Component", in this context, means a major
essential component (kernel, window system, and so on) of the
specific operating system (if any) on which the executable work
runs, or a compiler used to produce the work, or an object code
interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including
scripts to control those activities. However, it does not include
the work's System Libraries, or general-purpose tools or generally
available free programs which are used unmodified in performing
those activities but which are not part of the work. For example,
Corresponding Source includes interface definition files
associated with source files for the work, and the source code for
shared libraries and dynamically linked subprograms that the work
is specifically designed to require, such as by intimate data
communication or control flow between those subprograms and other
parts of the work.
The Corresponding Source need not include anything that users can
regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running
a covered work is covered by this License only if the output,
given its content, constitutes a covered work. This License
acknowledges your rights of fair use or other equivalent, as
provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise
remains in force. You may convey covered works to others for the
sole purpose of having them make modifications exclusively for
you, or provide you with facilities for running those works,
provided that you comply with the terms of this License in
conveying all material for which you do not control copyright.
Those thus making or running the covered works for you must do so
exclusively on your behalf, under your direction and control, on
terms that prohibit them from making any copies of your
copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section
10 makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under
article 11 of the WIPO copyright treaty adopted on 20 December
1996, or similar laws prohibiting or restricting circumvention of
such measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such
circumvention is effected by exercising rights under this License
with respect to the covered work, and you disclaim any intention
to limit operation or modification of the work as a means of
enforcing, against the work's users, your or third parties' legal
rights to forbid circumvention of technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the
code; keep intact all notices of the absence of any warranty; and
give all recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these
conditions:
a. The work must carry prominent notices stating that you
modified it, and giving a relevant date.
b. The work must carry prominent notices stating that it is
released under this License and any conditions added under
section 7. This requirement modifies the requirement in
section 4 to "keep intact all notices".
c. You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable
section 7 additional terms, to the whole of the work, and all
its parts, regardless of how they are packaged. This License
gives no permission to license the work in any other way, but
it does not invalidate such permission if you have separately
received it.
d. If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has
interactive interfaces that do not display Appropriate Legal
Notices, your work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered
work, and which are not combined with it such as to form a larger
program, in or on a volume of a storage or distribution medium, is
called an "aggregate" if the compilation and its resulting
copyright are not used to limit the access or legal rights of the
compilation's users beyond what the individual works permit.
Inclusion of a covered work in an aggregate does not cause this
License to apply to the other parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this
License, in one of these ways:
a. Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b. Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for
as long as you offer spare parts or customer support for that
product model, to give anyone who possesses the object code
either (1) a copy of the Corresponding Source for all the
software in the product that is covered by this License, on a
durable physical medium customarily used for software
interchange, for a price no more than your reasonable cost of
physically performing this conveying of source, or (2) access
to copy the Corresponding Source from a network server at no
charge.
c. Convey individual copies of the object code with a copy of
the written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially,
and only if you received the object code with such an offer,
in accord with subsection 6b.
d. Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access
to the Corresponding Source in the same way through the same
place at no further charge. You need not require recipients
to copy the Corresponding Source along with the object code.
If the place to copy the object code is a network server, the
Corresponding Source may be on a different server (operated
by you or a third party) that supports equivalent copying
facilities, provided you maintain clear directions next to
the object code saying where to find the Corresponding Source.
Regardless of what server hosts the Corresponding Source, you
remain obligated to ensure that it is available for as long
as needed to satisfy these requirements.
e. Convey the object code using peer-to-peer transmission,
provided you inform other peers where the object code and
Corresponding Source of the work are being offered to the
general public at no charge under subsection 6d.
A separable portion of the object code, whose source code is
excluded from the Corresponding Source as a System Library, need
not be included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means
any tangible personal property which is normally used for personal,
family, or household purposes, or (2) anything designed or sold for
incorporation into a dwelling. In determining whether a product
is a consumer product, doubtful cases shall be resolved in favor of
coverage. For a particular product received by a particular user,
"normally used" refers to a typical or common use of that class of
product, regardless of the status of the particular user or of the
way in which the particular user actually uses, or expects or is
expected to use, the product. A product is a consumer product
regardless of whether the product has substantial commercial,
industrial or non-consumer uses, unless such uses represent the
only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to
install and execute modified versions of a covered work in that
User Product from a modified version of its Corresponding Source.
The information must suffice to ensure that the continued
functioning of the modified object code is in no case prevented or
interfered with solely because modification has been made.
If you convey an object code work under this section in, or with,
or specifically for use in, a User Product, and the conveying
occurs as part of a transaction in which the right of possession
and use of the User Product is transferred to the recipient in
perpetuity or for a fixed term (regardless of how the transaction
is characterized), the Corresponding Source conveyed under this
section must be accompanied by the Installation Information. But
this requirement does not apply if neither you nor any third party
retains the ability to install modified object code on the User
Product (for example, the work has been installed in ROM).
The requirement to provide Installation Information does not
include a requirement to continue to provide support service,
warranty, or updates for a work that has been modified or
installed by the recipient, or for the User Product in which it
has been modified or installed. Access to a network may be denied
when the modification itself materially and adversely affects the
operation of the network or violates the rules and protocols for
communication across the network.
Corresponding Source conveyed, and Installation Information
provided, in accord with this section must be in a format that is
publicly documented (and with an implementation available to the
public in source code form), and must require no special password
or key for unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of
this License by making exceptions from one or more of its
conditions. Additional permissions that are applicable to the
entire Program shall be treated as though they were included in
this License, to the extent that they are valid under applicable
law. If additional permissions apply only to part of the Program,
that part may be used separately under those permissions, but the
entire Program remains governed by this License without regard to
the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part
of it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material
you add to a covered work, you may (if authorized by the copyright
holders of that material) supplement the terms of this License
with terms:
a. Disclaiming warranty or limiting liability differently from
the terms of sections 15 and 16 of this License; or
b. Requiring preservation of specified reasonable legal notices
or author attributions in that material or in the Appropriate
Legal Notices displayed by works containing it; or
c. Prohibiting misrepresentation of the origin of that material,
or requiring that modified versions of such material be
marked in reasonable ways as different from the original
version; or
d. Limiting the use for publicity purposes of names of licensors
or authors of the material; or
e. Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f. Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified
versions of it) with contractual assumptions of liability to
the recipient, for any liability that these contractual
assumptions directly impose on those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as
you received it, or any part of it, contains a notice stating that
it is governed by this License along with a term that is a further
restriction, you may remove that term. If a license document
contains a further restriction but permits relicensing or
conveying under this License, you may add to a covered work
material governed by the terms of that license document, provided
that the further restriction does not survive such relicensing or
conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in
the form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights
under this License (including any patent licenses granted under
the third paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly
and finally terminates your license, and (b) permanently, if the
copyright holder fails to notify you of the violation by some
reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from
that copyright holder, and you cure the violation prior to 30 days
after your receipt of the notice.
Termination of your rights under this section does not terminate
the licenses of parties who have received copies or rights from
you under this License. If your rights have been terminated and
not permanently reinstated, you do not qualify to receive new
licenses for the same material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer
transmission to receive a copy likewise does not require
acceptance. However, nothing other than this License grants you
permission to propagate or modify any covered work. These actions
infringe copyright if you do not accept this License. Therefore,
by modifying or propagating a covered work, you indicate your
acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not
responsible for enforcing compliance by third parties with this
License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a
covered work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or
could give under the previous paragraph, plus a right to
possession of the Corresponding Source of the work from the
predecessor in interest, if the predecessor has it or can get it
with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you
may not impose a license fee, royalty, or other charge for
exercise of rights granted under this License, and you may not
initiate litigation (including a cross-claim or counterclaim in a
lawsuit) alleging that any patent claim is infringed by making,
using, selling, offering for sale, or importing the Program or any
portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.
The work thus licensed is called the contributor's "contributor
version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner,
permitted by this License, of making, using, or selling its
contributor version, but do not include claims that would be
infringed only as a consequence of further modification of the
contributor version. For purposes of this definition, "control"
includes the right to grant patent sublicenses in a manner
consistent with the requirements of this License.
Each contributor grants you a non-exclusive, worldwide,
royalty-free patent license under the contributor's essential
patent claims, to make, use, sell, offer for sale, import and
otherwise run, modify and propagate the contents of its
contributor version.
In the following three paragraphs, a "patent license" is any
express agreement or commitment, however denominated, not to
enforce a patent (such as an express permission to practice a
patent or covenant not to sue for patent infringement). To
"grant" such a patent license to a party means to make such an
agreement or commitment not to enforce a patent against the party.
If you convey a covered work, knowingly relying on a patent
license, and the Corresponding Source of the work is not available
for anyone to copy, free of charge and under the terms of this
License, through a publicly available network server or other
readily accessible means, then you must either (1) cause the
Corresponding Source to be so available, or (2) arrange to deprive
yourself of the benefit of the patent license for this particular
work, or (3) arrange, in a manner consistent with the requirements
of this License, to extend the patent license to downstream
recipients. "Knowingly relying" means you have actual knowledge
that, but for the patent license, your conveying the covered work
in a country, or your recipient's use of the covered work in a
country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate,
modify or convey a specific copy of the covered work, then the
patent license you grant is automatically extended to all
recipients of the covered work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that
are specifically granted under this License. You may not convey a
covered work if you are a party to an arrangement with a third
party that is in the business of distributing software, under
which you make payment to the third party based on the extent of
your activity of conveying the work, and under which the third
party grants, to any of the parties who would receive the covered
work from you, a discriminatory patent license (a) in connection
with copies of the covered work conveyed by you (or copies made
from those copies), or (b) primarily for and in connection with
specific products or compilations that contain the covered work,
unless you entered into that arrangement, or that patent license
was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this
License. If you cannot convey a covered work so as to satisfy
simultaneously your obligations under this License and any other
pertinent obligations, then as a consequence you may not convey it
at all. For example, if you agree to terms that obligate you to
collect a royalty for further conveying from those to whom you
convey the Program, the only way you could satisfy both those
terms and this License would be to refrain entirely from conveying
the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a
single combined work, and to convey the resulting work. The terms
of this License will continue to apply to the part which is the
covered work, but the special requirements of the GNU Affero
General Public License, section 13, concerning interaction through
a network will apply to the combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new
versions of the GNU General Public License from time to time.
Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU
General Public License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that numbered version or of any later version published by the
Free Software Foundation. If the Program does not specify a
version number of the GNU General Public License, you may choose
any version ever published by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that
proxy's public statement of acceptance of a version permanently
authorizes you to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES
AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely
approximates an absolute waiver of all civil liability in
connection with the Program, unless a warranty or assumption of
liability accompanies a copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
===========================
How to Apply These Terms to Your New Programs
=============================================
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least the
"copyright" line and a pointer to where the full notice is found.
ONE LINE TO GIVE THE PROGRAM'S NAME AND A BRIEF IDEA OF WHAT IT DOES.
Copyright (C) YEAR NAME OF AUTHOR
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or (at
your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see `http://www.gnu.org/licenses/'.
Also add information on how to contact you by electronic and paper
mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
PROGRAM Copyright (C) YEAR NAME OF AUTHOR
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the
appropriate parts of the General Public License. Of course, your
program's commands might be different; for a GUI interface, you would
use an "about box".
You should also get your employer (if you work as a programmer) or
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. For more information on this, and how to apply and follow
the GNU GPL, see `http://www.gnu.org/licenses/'.
The GNU General Public License does not permit incorporating your
program into proprietary programs. If your program is a subroutine
library, you may consider it more useful to permit linking proprietary
applications with the library. If this is what you want to do, use the
GNU Lesser General Public License instead of this License. But first,
please read `http://www.gnu.org/philosophy/why-not-lgpl.html'.
File: m4.info, Node: Copying This Manual, Next: Indices, Prev: Copying This Package, Up: Top
Appendix B How to make copies of this manual
********************************************
This appendix covers the license for copying this manual. Note that
some of the longer examples in this manual are also distributed in the
directory `m4-1.4.12/examples/', where a more permissive license is in
effect when copying just the examples.
* Menu:
* GNU Free Documentation License:: License for copying this manual
File: m4.info, Node: GNU Free Documentation License, Up: Copying This Manual
B.1 License for copying this manual
===================================
Version 1.2, November 2002
Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other
functional and useful document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it,
with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by others.
This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
We have designed this License in order to use it for manuals for
free software, because free software needs free documentation: a
free program should come with manuals providing the same freedoms
that the software does. But this License is not limited to
software manuals; it can be used for any textual work, regardless
of subject matter or whether it is published as a printed book.
We recommend this License principally for works whose purpose is
instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium,
that contains a notice placed by the copyright holder saying it
can be distributed under the terms of this License. Such a notice
grants a world-wide, royalty-free license, unlimited in duration,
to use that work under the conditions stated herein. The
"Document", below, refers to any such manual or work. Any member
of the public is a licensee, and is addressed as "you". You
accept the license if you copy, modify or distribute the work in a
way requiring permission under copyright law.
A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section
of the Document that deals exclusively with the relationship of the
publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could
fall directly within that overall subject. (Thus, if the Document
is in part a textbook of mathematics, a Secondary Section may not
explain any mathematics.) The relationship could be a matter of
historical connection with the subject or with related matters, or
of legal, commercial, philosophical, ethical or political position
regarding them.
The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in
the notice that says that the Document is released under this
License. If a section does not fit the above definition of
Secondary then it is not allowed to be designated as Invariant.
The Document may contain zero Invariant Sections. If the Document
does not identify any Invariant Sections then there are none.
The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images
composed of pixels) generic paint programs or (for drawings) some
widely available drawing editor, and that is suitable for input to
text formatters or for automatic translation to a variety of
formats suitable for input to text formatters. A copy made in an
otherwise Transparent file format whose markup, or absence of
markup, has been arranged to thwart or discourage subsequent
modification by readers is not Transparent. An image format is
not Transparent if used for any substantial amount of text. A
copy that is not "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
SGML or XML using a publicly available DTD, and
standard-conforming simple HTML, PostScript or PDF designed for
human modification. Examples of transparent image formats include
PNG, XCF and JPG. Opaque formats include proprietary formats that
can be read and edited only by proprietary word processors, SGML or
XML for which the DTD and/or processing tools are not generally
available, and the machine-generated HTML, PostScript or PDF
produced by some word processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
works in formats which do not have any title page as such, "Title
Page" means the text near the most prominent appearance of the
work's title, preceding the beginning of the body of the text.
A section "Entitled XYZ" means a named subunit of the Document
whose title either is precisely XYZ or contains XYZ in parentheses
following text that translates XYZ in another language. (Here XYZ
stands for a specific section name mentioned below, such as
"Acknowledgements", "Dedications", "Endorsements", or "History".)
To "Preserve the Title" of such a section when you modify the
Document means that it remains a section "Entitled XYZ" according
to this definition.
The Document may include Warranty Disclaimers next to the notice
which states that this License applies to the Document. These
Warranty Disclaimers are considered to be included by reference in
this License, but only as regards disclaiming warranties: any other
implication that these Warranty Disclaimers may have is void and
has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License
applies to the Document are reproduced in all copies, and that you
add no other conditions whatsoever to those of this License. You
may not use technical measures to obstruct or control the reading
or further copying of the copies you make or distribute. However,
you may accept compensation in exchange for copies. If you
distribute a large enough number of copies you must also follow
the conditions in section 3.
You may also lend copies, under the same conditions stated above,
and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly
have printed covers) of the Document, numbering more than 100, and
the Document's license notice requires Cover Texts, you must
enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
and legibly identify you as the publisher of these copies. The
front cover must present the full title with all words of the
title equally prominent and visible. You may add other material
on the covers in addition. Copying with changes limited to the
covers, as long as they preserve the title of the Document and
satisfy these conditions, can be treated as verbatim copying in
other respects.
If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto
adjacent pages.
If you publish or distribute Opaque copies of the Document
numbering more than 100, you must either include a
machine-readable Transparent copy along with each Opaque copy, or
state in or with each Opaque copy a computer-network location from
which the general network-using public has access to download
using public-standard network protocols a complete Transparent
copy of the Document, free of added material. If you use the
latter option, you must take reasonably prudent steps, when you
begin distribution of Opaque copies in quantity, to ensure that
this Transparent copy will remain thus accessible at the stated
location until at least one year after the last time you
distribute an Opaque copy (directly or through your agents or
retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of
the Document well before redistributing any large number of
copies, to give them a chance to provide you with an updated
version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document
under the conditions of sections 2 and 3 above, provided that you
release the Modified Version under precisely this License, with
the Modified Version filling the role of the Document, thus
licensing distribution and modification of the Modified Version to
whoever possesses a copy of it. In addition, you must do these
things in the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title
distinct from that of the Document, and from those of
previous versions (which should, if there were any, be listed
in the History section of the Document). You may use the
same title as a previous version if the original publisher of
that version gives permission.
B. List on the Title Page, as authors, one or more persons or
entities responsible for authorship of the modifications in
the Modified Version, together with at least five of the
principal authors of the Document (all of its principal
authors, if it has fewer than five), unless they release you
from this requirement.
C. State on the Title page the name of the publisher of the
Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications
adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license
notice giving the public permission to use the Modified
Version under the terms of this License, in the form shown in
the Addendum below.
G. Preserve in that license notice the full lists of Invariant
Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title,
and add to it an item stating at least the title, year, new
authors, and publisher of the Modified Version as given on
the Title Page. If there is no section Entitled "History" in
the Document, create one stating the title, year, authors,
and publisher of the Document as given on its Title Page,
then add an item describing the Modified Version as stated in
the previous sentence.
J. Preserve the network location, if any, given in the Document
for public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in
the "History" section. You may omit a network location for a
work that was published at least four years before the
Document itself, or if the original publisher of the version
it refers to gives permission.
K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the
section all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document,
unaltered in their text and in their titles. Section numbers
or the equivalent are not considered part of the section
titles.
M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled
"Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option
designate some or all of these sections as invariant. To do this,
add their titles to the list of Invariant Sections in the Modified
Version's license notice. These titles must be distinct from any
other section titles.
You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties--for example, statements of peer review or that the text
has been approved by an organization as the authoritative
definition of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end
of the list of Cover Texts in the Modified Version. Only one
passage of Front-Cover Text and one of Back-Cover Text may be
added by (or through arrangements made by) any one entity. If the
Document already includes a cover text for the same cover,
previously added by you or by arrangement made by the same entity
you are acting on behalf of, you may not add another; but you may
replace the old one, on explicit permission from the previous
publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this
License give permission to use their names for publicity for or to
assert or imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under
this License, under the terms defined in section 4 above for
modified versions, provided that you include in the combination
all of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your
combined work in its license notice, and that you preserve all
their Warranty Disclaimers.
The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy. If there are multiple Invariant Sections with the same name
but different contents, make the title of each such section unique
by adding at the end of it, in parentheses, the name of the
original author or publisher of that section if known, or else a
unique number. Make the same adjustment to the section titles in
the list of Invariant Sections in the license notice of the
combined work.
In the combination, you must combine any sections Entitled
"History" in the various original documents, forming one section
Entitled "History"; likewise combine any sections Entitled
"Acknowledgements", and any sections Entitled "Dedications". You
must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other
documents released under this License, and replace the individual
copies of this License in the various documents with a single copy
that is included in the collection, provided that you follow the
rules of this License for verbatim copying of each of the
documents in all other respects.
You may extract a single document from such a collection, and
distribute it individually under this License, provided you insert
a copy of this License into the extracted document, and follow
this License in all other respects regarding verbatim copying of
that document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of
a storage or distribution medium, is called an "aggregate" if the
copyright resulting from the compilation is not used to limit the
legal rights of the compilation's users beyond what the individual
works permit. When the Document is included in an aggregate, this
License does not apply to the other works in the aggregate which
are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half
of the entire aggregate, the Document's Cover Texts may be placed
on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic
form. Otherwise they must appear on printed covers that bracket
the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may
distribute translations of the Document under the terms of section
4. Replacing Invariant Sections with translations requires special
permission from their copyright holders, but you may include
translations of some or all Invariant Sections in addition to the
original versions of these Invariant Sections. You may include a
translation of this License, and all the license notices in the
Document, and any Warranty Disclaimers, provided that you also
include the original English version of this License and the
original versions of those notices and disclaimers. In case of a
disagreement between the translation and the original version of
this License or a notice or disclaimer, the original version will
prevail.
If a section in the Document is Entitled "Acknowledgements",
"Dedications", or "History", the requirement (section 4) to
Preserve its Title (section 1) will typically require changing the
actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document
except as expressly provided for under this License. Any other
attempt to copy, modify, sublicense or distribute the Document is
void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of
the GNU Free Documentation License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns. See
`http://www.gnu.org/copyleft/'.
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If
the Document does not specify a version number of this License,
you may choose any version ever published (not as a draft) by the
Free Software Foundation.
ADDENDUM: How to use this License for your documents
====================================================
To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:
Copyright (C) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is included in the section entitled ``GNU
Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with
the Front-Cover Texts being LIST, and with the Back-Cover Texts
being LIST.
If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.
If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.
File: m4.info, Node: Indices, Prev: Copying This Manual, Up: Top
Appendix C Indices of concepts and macros
*****************************************
* Menu:
* Macro index:: Index for all `m4' macros
* Concept index:: Index for many concepts
File: m4.info, Node: Macro index, Next: Concept index, Up: Indices
C.1 Index for all `m4' macros
=============================
This index covers all `m4' builtins, as well as several useful
composite macros. References are exclusively to the places where a
macro is introduced the first time.
[index ]
* Menu:
* __file__: Location. (line 10)
* __gnu__: Platform macros. (line 12)
* __line__: Location. (line 11)
* __os2__: Platform macros. (line 13)
* __program__: Location. (line 12)
* __unix__: Platform macros. (line 15)
* __windows__: Platform macros. (line 17)
* argn: Shift. (line 258)
* array: Define. (line 56)
* array_set: Define. (line 57)
* builtin: Builtin. (line 9)
* capitalize: Patsubst. (line 55)
* changecom: Changecom. (line 10)
* changequote: Changequote. (line 10)
* changeword: Changeword. (line 23)
* cleardivert: Cleardivert. (line 26)
* cond: Shift. (line 53)
* debugfile: Debug Output. (line 11)
* debugmode: Debug Levels. (line 78)
* decr: Incr. (line 11)
* define: Define. (line 10)
* define_blind: Ifelse. (line 70)
* defn: Defn. (line 10)
* divert: Divert. (line 9)
* divnum: Divnum. (line 9)
* dnl: Dnl. (line 9)
* downcase: Patsubst. (line 54)
* dquote: Shift. (line 196)
* dquote_elt: Shift. (line 197)
* dumpdef: Dumpdef. (line 10)
* errprint: Errprint. (line 9)
* esyscmd: Esyscmd. (line 9)
* eval: Eval. (line 9)
* example: Manual. (line 40)
* exch: Arguments. (line 13)
* fatal_error: M4exit. (line 25)
* foreach: Foreach. (line 9)
* foreachq: Foreach. (line 10)
* forloop: Forloop. (line 9)
* format: Format. (line 9)
* ifdef: Ifdef. (line 10)
* ifelse: Ifelse. (line 14)
* include: Include. (line 9)
* incr: Incr. (line 10)
* index: Index macro. (line 9)
* indir: Indir. (line 9)
* join: Shift. (line 104)
* joinall: Shift. (line 105)
* len: Len. (line 9)
* m4exit: M4exit. (line 10)
* m4wrap: M4wrap. (line 14)
* maketemp: Mkstemp. (line 12)
* mkstemp: Mkstemp. (line 11)
* nargs: Pseudo Arguments. (line 13)
* os2: Platform macros. (line 14)
* patsubst: Patsubst. (line 9)
* popdef: Pushdef. (line 12)
* pushdef: Pushdef. (line 11)
* quote: Shift. (line 195)
* regexp: Regexp. (line 9)
* reverse: Shift. (line 32)
* shift: Shift. (line 17)
* sinclude: Include. (line 10)
* substr: Substr. (line 9)
* syscmd: Syscmd. (line 9)
* sysval: Sysval. (line 9)
* traceoff: Trace. (line 11)
* traceon: Trace. (line 10)
* translit: Translit. (line 9)
* undefine: Undefine. (line 9)
* undivert: Undivert. (line 9)
* unix: Platform macros. (line 16)
* upcase: Patsubst. (line 53)
* windows: Platform macros. (line 18)
File: m4.info, Node: Concept index, Prev: Macro index, Up: Indices
C.2 Index for many concepts
===========================
[index ]
* Menu:
* arguments to macros <1>: Arguments. (line 6)
* arguments to macros: Macro Arguments. (line 6)
* arguments to macros, special: Pseudo Arguments. (line 6)
* arguments, joining: Shift. (line 100)
* arguments, more than nine <1>: Arguments. (line 54)
* arguments, more than nine <2>: Shift. (line 252)
* arguments, more than nine: Improved foreach. (line 155)
* arguments, quoted macro: Quoting Arguments. (line 6)
* arguments, reversing: Shift. (line 31)
* arithmetic: Arithmetic. (line 6)
* arrays: Define. (line 52)
* avoiding quadratic behavior: Improved foreach. (line 38)
* basic regular expressions <1>: Regexp. (line 6)
* basic regular expressions: Patsubst. (line 6)
* blind macro <1>: Ifelse. (line 52)
* blind macro: Inhibiting Invocation.
(line 14)
* bug reports: Bugs. (line 6)
* builtins, indirect call of: Builtin. (line 6)
* builtins, special tokens: Defn. (line 101)
* call of builtins, indirect: Builtin. (line 6)
* call of macros, indirect: Indir. (line 6)
* case statement: Ifelse. (line 119)
* changing comment delimiters: Changecom. (line 6)
* changing quote delimiters: Changequote. (line 6)
* changing syntax: Changeword. (line 6)
* characters, translating: Translit. (line 6)
* command line: Invoking m4. (line 6)
* command line, file names on the: Command line files. (line 6)
* command line, macro definitions on the: Preprocessor features.
(line 6)
* command line, options: Invoking m4. (line 10)
* commands, exit status from shell: Sysval. (line 6)
* commands, running shell: Shell commands. (line 6)
* comment delimiters, changing: Changecom. (line 6)
* comments: Comments. (line 6)
* comments, copied to output: Changecom. (line 29)
* comparing strings: Ifelse. (line 6)
* compatibility: Compatibility. (line 6)
* concatenating arguments: Shift. (line 100)
* conditional, short-circuiting: Shift. (line 51)
* conditionals: Ifdef. (line 6)
* controlling debugging output: Debug Levels. (line 6)
* counting loops: Forloop. (line 6)
* debugging macros: Debugging. (line 6)
* debugging output, controlling: Debug Levels. (line 6)
* debugging output, saving: Debug Output. (line 6)
* decrement operator: Incr. (line 6)
* deferring expansion: M4wrap. (line 6)
* deferring output: Diversions. (line 6)
* defining new macros: Definitions. (line 6)
* definition stack: Pushdef. (line 6)
* definitions, displaying macro <1>: Defn. (line 6)
* definitions, displaying macro: Dumpdef. (line 6)
* deleting macros: Undefine. (line 6)
* deleting whitespace in input: Dnl. (line 6)
* delimiters, changing <1>: Changecom. (line 6)
* delimiters, changing: Changequote. (line 6)
* discarding diverted text: Cleardivert. (line 6)
* discarding input <1>: Divert. (line 42)
* discarding input <2>: Dnl. (line 6)
* discarding input: Ifelse. (line 6)
* displaying macro definitions: Dumpdef. (line 6)
* diversion numbers: Divnum. (line 6)
* diverted text, discarding: Cleardivert. (line 6)
* diverting output to files: Divert. (line 6)
* dumping into frozen file: Using frozen files. (line 6)
* error messages, printing: Errprint. (line 6)
* errors, fatal: Operation modes. (line 20)
* evaluation, of integer expressions: Eval. (line 6)
* examples, understanding: Manual. (line 6)
* executing shell commands: Shell commands. (line 6)
* exit status from shell commands: Sysval. (line 6)
* exiting from m4: M4exit. (line 6)
* expansion of macros: Macro expansion. (line 6)
* expansion, deferring: M4wrap. (line 6)
* expansion, tracing macro: Trace. (line 6)
* expressions, evaluation of integer: Eval. (line 6)
* expressions, regular <1>: Patsubst. (line 6)
* expressions, regular: Regexp. (line 6)
* extracting substrings: Substr. (line 6)
* fast loading of frozen files: Using frozen files. (line 6)
* fatal errors: Operation modes. (line 20)
* FDL, GNU Free Documentation License: GNU Free Documentation License.
(line 6)
* file format, frozen file: Frozen file format. (line 6)
* file inclusion <1>: File Inclusion. (line 6)
* file inclusion: Undivert. (line 13)
* file names, on the command line: Command line files. (line 6)
* files, diverting output to: Divert. (line 6)
* files, names of temporary: Mkstemp. (line 6)
* for each loops: Foreach. (line 6)
* for loops: Forloop. (line 6)
* formatted output: Format. (line 6)
* Free Documentation License (FDL), GNU: GNU Free Documentation License.
(line 6)
* frozen file format: Frozen file format. (line 6)
* frozen files for fast loading: Using frozen files. (line 6)
* General Public License (GPL), GNU: GNU General Public License.
(line 6)
* GNU extensions <1>: Arguments. (line 54)
* GNU extensions <2>: Undivert. (line 13)
* GNU extensions <3>: Esyscmd. (line 6)
* GNU extensions <4>: Search Path. (line 6)
* GNU extensions <5>: Divert. (line 54)
* GNU extensions <6>: Undivert. (line 81)
* GNU extensions <7>: Define. (line 41)
* GNU extensions <8>: Inhibiting Invocation.
(line 14)
* GNU extensions <9>: Using frozen files. (line 6)
* GNU extensions <10>: Regexp. (line 6)
* GNU extensions <11>: Debug Output. (line 6)
* GNU extensions <12>: Debug Levels. (line 74)
* GNU extensions <13>: Patsubst. (line 6)
* GNU extensions <14>: Format. (line 6)
* GNU extensions <15>: Indir. (line 6)
* GNU extensions <16>: Eval. (line 125)
* GNU extensions <17>: Mkstemp. (line 59)
* GNU extensions <18>: Builtin. (line 6)
* GNU extensions: Extensions. (line 6)
* GNU Free Documentation License: GNU Free Documentation License.
(line 6)
* GNU General Public License: GNU General Public License.
(line 6)
* GNU M4, history of: History. (line 6)
* GPL, GNU General Public License: GNU General Public License.
(line 6)
* history of m4: History. (line 6)
* included files, search path for: Search Path. (line 6)
* inclusion, of files <1>: File Inclusion. (line 6)
* inclusion, of files: Undivert. (line 81)
* increment operator: Incr. (line 6)
* indirect call of builtins: Builtin. (line 6)
* indirect call of macros: Indir. (line 6)
* initialization, frozen state: Using frozen files. (line 6)
* input location <1>: Location. (line 6)
* input location: Preprocessor features.
(line 28)
* input tokens: Syntax. (line 6)
* input, discarding <1>: Divert. (line 42)
* input, discarding <2>: Dnl. (line 6)
* input, discarding: Ifelse. (line 6)
* input, saving: M4wrap. (line 6)
* integer arithmetic: Arithmetic. (line 6)
* integer expression evaluation: Eval. (line 6)
* invoking m4: Invoking m4. (line 6)
* invoking macros: Invocation. (line 6)
* iterating over lists: Foreach. (line 6)
* joining arguments: Shift. (line 100)
* length of strings: Len. (line 6)
* lexical structure of words: Changeword. (line 6)
* License, code: Copying This Package.
(line 6)
* License, manual: Copying This Manual. (line 6)
* limit, nesting: Limits control. (line 43)
* literal output: Pseudo Arguments. (line 106)
* local variables: Pushdef. (line 79)
* location, input <1>: Location. (line 6)
* location, input: Preprocessor features.
(line 28)
* loops: Shift. (line 10)
* loops, counting: Forloop. (line 6)
* loops, list iteration: Foreach. (line 6)
* M4PATH: Search Path. (line 9)
* macro definitions, on the command line: Preprocessor features.
(line 6)
* macro expansion, tracing: Trace. (line 6)
* macro invocation: Invocation. (line 6)
* macro, blind <1>: Inhibiting Invocation.
(line 14)
* macro, blind: Ifelse. (line 52)
* macros, arguments to <1>: Arguments. (line 6)
* macros, arguments to: Macro Arguments. (line 6)
* macros, debugging: Debugging. (line 6)
* macros, displaying definitions <1>: Defn. (line 6)
* macros, displaying definitions: Dumpdef. (line 6)
* macros, expansion of: Macro expansion. (line 6)
* macros, how to define new: Definitions. (line 6)
* macros, how to delete: Undefine. (line 6)
* macros, how to rename: Defn. (line 6)
* macros, indirect call of: Indir. (line 6)
* macros, quoted arguments to: Quoting Arguments. (line 6)
* macros, recursive: Shift. (line 6)
* macros, special arguments to: Pseudo Arguments. (line 6)
* macros, temporary redefinition of: Pushdef. (line 6)
* manipulating quotes: Shift. (line 191)
* messages, printing error: Errprint. (line 6)
* more than nine arguments <1>: Improved foreach. (line 155)
* more than nine arguments <2>: Arguments. (line 54)
* more than nine arguments: Shift. (line 252)
* multibranches: Ifelse. (line 119)
* names: Names. (line 6)
* nesting limit: Limits control. (line 43)
* nine arguments, more than <1>: Improved foreach. (line 155)
* nine arguments, more than <2>: Shift. (line 252)
* nine arguments, more than: Arguments. (line 54)
* numbers: Manual. (line 57)
* options, command line: Invoking m4. (line 10)
* output, diverting to files: Divert. (line 6)
* output, formatted: Format. (line 6)
* output, literal: Pseudo Arguments. (line 106)
* output, saving debugging: Debug Output. (line 6)
* overview of m4: Intro. (line 6)
* pattern substitution: Patsubst. (line 6)
* platform macros: Platform macros. (line 6)
* positional parameters, more than nine: Arguments. (line 54)
* POSIX: Extensions. (line 6)
* POSIXLY_CORRECT <1>: Incompatibilities. (line 146)
* POSIXLY_CORRECT: Invoking m4. (line 10)
* preprocessor features: Preprocessor features.
(line 6)
* printing error messages: Errprint. (line 6)
* quadratic behavior, avoiding: Improved foreach. (line 38)
* quote delimiters, changing: Changequote. (line 6)
* quote manipulation: Shift. (line 191)
* quoted macro arguments: Quoting Arguments. (line 6)
* quoted string: Quoted strings. (line 6)
* quoting rule of thumb: Quoting Arguments. (line 22)
* recursive macros: Shift. (line 6)
* redefinition of macros, temporary: Pushdef. (line 6)
* regular expressions <1>: Changeword. (line 6)
* regular expressions <2>: Regexp. (line 6)
* regular expressions: Patsubst. (line 6)
* reloading a frozen file: Using frozen files. (line 6)
* renaming macros: Defn. (line 6)
* reporting bugs: Bugs. (line 6)
* rescanning <1>: Other Incompatibilities.
(line 52)
* rescanning <2>: Limits control. (line 56)
* rescanning <3>: Pseudo Arguments. (line 106)
* rescanning <4>: Defn. (line 61)
* rescanning: Inhibiting Invocation.
(line 87)
* reversing arguments: Shift. (line 31)
* rule of thumb, quoting: Quoting Arguments. (line 22)
* running shell commands: Shell commands. (line 6)
* saving debugging output: Debug Output. (line 6)
* saving input: M4wrap. (line 6)
* search path for included files: Search Path. (line 6)
* shell commands, exit status from: Sysval. (line 6)
* shell commands, running: Shell commands. (line 6)
* short-circuiting conditional: Shift. (line 51)
* special arguments to macros: Pseudo Arguments. (line 6)
* stack, macro definition: Pushdef. (line 6)
* standard error, output to <1>: Dumpdef. (line 6)
* standard error, output to <2>: Errprint. (line 6)
* standard error, output to: Trace. (line 6)
* status of shell commands: Sysval. (line 6)
* status, setting m4 exit: M4exit. (line 6)
* string, quoted: Quoted strings. (line 6)
* strings, length of: Len. (line 6)
* substitution by regular expression: Patsubst. (line 6)
* substrings, extracting: Substr. (line 6)
* substrings, locating: Index macro. (line 6)
* suggestions, reporting: Bugs. (line 6)
* suppressing warnings: Macro Arguments. (line 38)
* switch statement: Ifelse. (line 119)
* synchronization lines: Preprocessor features.
(line 28)
* syntax, changing: Changeword. (line 6)
* temporary file names: Mkstemp. (line 6)
* temporary redefinition of macros: Pushdef. (line 6)
* TMPDIR: Diversions. (line 10)
* tokens: Syntax. (line 6)
* tokens, builtin macro: Defn. (line 101)
* tokens, special: Other tokens. (line 6)
* tracing macro expansion: Trace. (line 6)
* translating characters: Translit. (line 6)
* undefining macros: Undefine. (line 6)
* UNIX commands, exit status from: Sysval. (line 6)
* UNIX commands, running: Shell commands. (line 6)
* variables, local: Pushdef. (line 79)
* warnings, suppressing: Macro Arguments. (line 38)
* words: Names. (line 6)
* words, lexical structure of: Changeword. (line 6)
Tag Table:
Node: Top868
Node: Preliminaries9545
Node: Intro10231
Node: History11863
Node: Bugs14622
Node: Manual15873
Node: Invoking m419271
Node: Operation modes21417
Node: Preprocessor features24389
Node: Limits control27486
Node: Frozen state31388
Node: Debugging options32187
Node: Command line files33926
Node: Syntax35499
Node: Names36618
Node: Quoted strings37080
Node: Comments37729
Node: Other tokens38606
Node: Input processing39184
Ref: Input processing-Footnote-146857
Node: Macros47052
Node: Invocation47546
Node: Inhibiting Invocation48347
Node: Macro Arguments52478
Node: Quoting Arguments55540
Node: Macro expansion57663
Node: Definitions58364
Node: Define59149
Node: Arguments61587
Node: Pseudo Arguments65259
Node: Undefine68801
Node: Defn69931
Node: Pushdef74381
Node: Indir77007
Node: Builtin79135
Node: Conditionals81361
Node: Ifdef82180
Node: Ifelse83043
Node: Shift88324
Node: Forloop98873
Node: Foreach101509
Node: Debugging106982
Node: Dumpdef107567
Node: Trace108977
Node: Debug Levels112550
Node: Debug Output117254
Node: Input Control118538
Node: Dnl119075
Node: Changequote120976
Node: Changecom127073
Node: Changeword130769
Node: M4wrap136210
Node: File Inclusion140206
Node: Include140523
Node: Search Path143234
Node: Diversions144151
Node: Divert145942
Node: Undivert148468
Node: Divnum151632
Node: Cleardivert152096
Node: Text handling153301
Node: Len154024
Node: Index macro154409
Node: Regexp155282
Node: Substr157823
Node: Translit158874
Node: Patsubst161596
Node: Format166122
Node: Arithmetic169315
Node: Incr169764
Node: Eval170539
Node: Shell commands178502
Node: Platform macros179424
Node: Syscmd181539
Node: Esyscmd183358
Node: Sysval184406
Node: Mkstemp186024
Node: Miscellaneous189979
Node: Errprint190412
Node: Location191631
Node: M4exit194405
Node: Frozen files196492
Node: Using frozen files197273
Node: Frozen file format200537
Node: Compatibility203601
Node: Extensions204667
Node: Incompatibilities208534
Node: Other Incompatibilities217460
Node: Answers220106
Node: Improved exch220836
Node: Improved forloop221374
Node: Improved foreach224891
Node: Improved m4wrap237910
Node: Improved cleardivert240337
Node: Improved capitalize241318
Node: Improved fatal_error246180
Node: Copying This Package247241
Node: GNU General Public License247720
Node: Copying This Manual285279
Node: GNU Free Documentation License285799
Node: Indices308195
Node: Macro index308475
Node: Concept index314201
End Tag Table