config root man

################################################################################
# This test verifies whether the group_replication works fine if the
# server is killed during its recovery phase.
#
# Test:
# 0. The test requires three servers: M1,M2 and M3.
# 1. Start GR on servers M1 and M2.
# 2. Execute some operations on the group through server M1
#    using procedure dml_operations.
# 3. Join M3 to the group and wait until the server is in Recovery.
# 4. start executing DML operations on the group through server1 to
#    ensure that the cached transactions are present at the recovery
#    server when it gets killed.
# 5. Kill and restart the server M3 during phase-1 of recovery.
# 6. Again Join the restarted member to the group
# 7. Wait until the recovery phase-1 of the server M3 ends.
# 8. Start executing the DML transactions on the group through server1
#    so that the cached transaction will be added on the server M3.
# 9. Kill and restart the server M3 during phase-2 of recovery.
# 10.Wait until all the servers are online.
# 11.Verify that all the members have same data.
# 12.Cleanup
################################################################################

# This test does crashes servers, thence we skip it on asan and valgrind.
--source include/not_asan.inc
--source include/not_valgrind.inc
--source include/big_test.inc
--source include/force_restart.inc

--source ../inc/have_group_replication_plugin.inc
--let $rpl_server_count= 3
--let $rpl_skip_group_replication_start= 1
--source ../inc/group_replication.inc

# START GR on Two servers M1 and M2
--let $rpl_connection_name= server1
--source include/rpl_connection.inc

SET sql_log_bin=0;
CREATE TABLE t1(a int primary key);
SET sql_log_bin=1;

--source ../inc/start_and_bootstrap_group_replication.inc

--let $rpl_connection_name= server2
--source include/rpl_connection.inc

SET sql_log_bin=0;
CREATE TABLE t1(a int primary key);
SET sql_log_bin=1;

--source include/start_group_replication.inc

# Execute the operations on the group through server1 so
# that when M3 joins it will be in recovery for some time.

--let $rpl_connection_name= server1
--source include/rpl_connection.inc

# Create the procedure to perform dml operations
delimiter $$;
CREATE PROCEDURE dml_operations(IN p INT,IN q INT)
     BEGIN
     declare x INT;
     set x=p;
     while x<q do
     insert into t1 values (x);
     update t1 set a=x+400 where a=x;
     delete from t1 where a<420;
     set x=x+1;
     end  while;
     end$$
delimiter ;$$
--echo

--echo ----call procedure----
call dml_operations(1,100);
--echo

# JOIN M3 to the group
--let $rpl_connection_name= server3
--source include/rpl_connection.inc

set sql_log_bin=0;
call mtr.add_suppression(".*Slave SQL for channel 'group_replication_applier': ... The slave coordinator and worker threads are stopped, possibly leaving data in inconsistent state*");
call mtr.add_suppression("\\[Warning\\] InnoDB: Database page corruption or a failed file read of page");
CREATE TABLE t1(a int primary key);
SET sql_log_bin=1;
LOCK TABLES t1 READ;

--let $rpl_connection_name= server_3
--source include/rpl_connection.inc
--let $group_replication_start_member_state= RECOVERING
--source include/start_group_replication.inc

--let $rpl_connection_name= server1
--source include/rpl_connection.inc

--echo ----call procedure----
send call dml_operations(100,200);
--echo

--let $rpl_connection_name= server_1
--source include/rpl_connection.inc

# Wait to ensure that some cached transactions will be present at the time
# of kill of the recovery server.
--let $wait_timeout= 200
--let $wait_condition= SELECT MAX(a) > 520 FROM t1
--source include/wait_condition.inc

--let $rpl_connection_name= server3
--source include/rpl_connection.inc
UNLOCK TABLES;

# sleep for sometime so that some transactions executes on server3.
sleep 2;

# Kill server3
--echo # killing
--let $group_replication_local_address= `SELECT @@GLOBAL.group_replication_local_address`
--let $group_replication_group_seeds= `SELECT @@GLOBAL.group_replication_group_seeds`
--let $_group_replication_group_whitelist= `SELECT @@GLOBAL.group_replication_ip_whitelist`
--let $restart_parameters=restart:--group_replication_local_address=$group_replication_local_address --group_replication_group_seeds=$group_replication_group_seeds --group_replication_group_name=$group_replication_group_name --group_replication_ip_whitelist=$_group_replication_group_whitelist
--replace_result $group_replication_local_address GROUP_REPLICATION_LOCAL_ADDRESS $group_replication_group_seeds GROUP_REPLICATION_GROUP_SEEDS $group_replication_group_name GROUP_REPLICATION_GROUP_NAME $_group_replication_group_whitelist GROUP_REPLICATION_GROUP_WHITELIST

--source ../inc/kill_and_restart_mysqld.inc
--echo # restarting

# Needed as we are not using rpl_restart_server.inc
--let $rpl_server_number= 3
--source include/rpl_reconnect.inc

--let $rpl_connection_name= server2
--source include/rpl_connection.inc

# Wait until group has only 2 members, that is, server3's death is detected by
# the group.
--echo # check that there are 2 mebers in the group
--let $group_replication_number_of_members= 2
--source ../inc/gr_wait_for_number_of_members.inc

--let $rpl_connection_name= server1
--source include/rpl_connection.inc
reap;

--echo ----call procedure----
call dml_operations(200,300);
--echo

# Start GR on server M3
--let $rpl_connection_name= server3
--source include/rpl_connection.inc
LOCK TABLES t1 READ;

--let $rpl_connection_name= server_3
--source include/rpl_connection.inc
start group_replication;

--let $group_replication_member_state= RECOVERING
--source ../inc/gr_wait_for_member_state.inc

--let $rpl_connection_name= server1
--source include/rpl_connection.inc

--echo ----call procedure----
send call dml_operations(300,400);
--echo

--let $rpl_connection_name= server3
--source include/rpl_connection.inc
UNLOCK TABLES;

# Wait until Recovery phase1 ends.(until the service_state of group_replication_recovery goes to OFF state.)
--let $rpl_connection_name= server3
--source include/rpl_connection.inc

--let $wait_timeout=300
--let $wait_condition= SELECT COUNT(*)=1 FROM performance_schema.replication_connection_status WHERE channel_name='group_replication_recovery' AND service_state='OFF'
--source include/wait_condition.inc

sleep 1;

# Kill the recovery server
# kill server M3
--echo # killing
--let $restart_parameters=restart:--group_replication_local_address=$group_replication_local_address --group_replication_group_seeds=$group_replication_group_seeds --group_replication_group_name=$group_replication_group_name --group_replication_ip_whitelist=$_group_replication_group_whitelist
--replace_result $group_replication_local_address GROUP_REPLICATION_LOCAL_ADDRESS $group_replication_group_seeds GROUP_REPLICATION_GROUP_SEEDS $group_replication_group_name GROUP_REPLICATION_GROUP_NAME $_group_replication_group_whitelist GROUP_REPLICATION_GROUP_WHITELIST
--source ../inc/kill_and_restart_mysqld.inc
--echo # restarting

# Needed as we are not using rpl_restart_server.inc
--let $rpl_server_number= 3
--source include/rpl_reconnect.inc

--let $rpl_connection_name= server2
--source include/rpl_connection.inc

# Wait until group has only 2 members, that is, recovery server's death is detected by
# the group.
--echo # check that there are 2 mebers in a group
--let $group_replication_number_of_members= 2
--source ../inc/gr_wait_for_number_of_members.inc

--let $rpl_connection_name= server1
--source include/rpl_connection.inc
reap;

# Start GR on killed and restarted recovery server.
--let $rpl_connection_name= server3
--source include/rpl_connection.inc

# Setting recovery user to avoid sporadic failures due to empty user.
--disable_warnings
RESET SLAVE FOR CHANNEL 'group_replication_recovery';
CHANGE MASTER TO MASTER_USER= 'root' FOR CHANNEL 'group_replication_recovery';
--enable_warnings
--let $wait_timeout= 300
--source include/start_group_replication.inc

--source include/rpl_sync.inc

# Verify that table t1 has same data on all the servers.
--let $diff_tables=server1:t1, server2:t1, server3:t1
--source include/diff_tables.inc

# Clean up.
drop table t1;
drop procedure dml_operations;
--let $skip_restore_connection= 0
--source ../inc/group_replication_end.inc