config root man

Current Path : /usr/share/snmp/mibs/

FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64
Upload File :
Current File : //usr/share/snmp/mibs/BEGEMOT-ATM.txt

--
-- Copyright (c) 2001-2002
--	Fraunhofer Institute for Open Communication Systems (FhG Fokus).
--	All rights reserved.
-- Copyright (c) 2004
--	Hartmut Brandt.
-- 	All rights reserved.
--
-- Author: Hartmut Brandt <harti@freebsd.org>
-- 
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
-- 1. Redistributions of source code must retain the above copyright
--    notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
--    notice, this list of conditions and the following disclaimer in the
--    documentation and/or other materials provided with the distribution.
-- 
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-- ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--  
-- $Begemot: libunimsg/snmp_atm/BEGEMOT-ATM.txt,v 1.2 2004/08/06 14:50:26 brandt Exp $
--
-- Private Begemot MIB for ATM interfaces.
--
BEGEMOT-ATM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, TimeTicks
	FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DisplayString
	FROM SNMPv2-TC
    ifIndex
	FROM IF-MIB
    begemot
	FROM BEGEMOT-MIB;

begemotAtm MODULE-IDENTITY
    LAST-UPDATED "200407190000Z"
    ORGANIZATION "German Aerospace Centre"
    CONTACT-INFO
	    "		Hartmut Brandt

             Postal:    German Aerospace Centre (DLR)
                        Institute of Communications and Navigation
                        82234 Wessling
                        Germany

	     Fax:	+49 8153 28 2844

	     E-mail:	harti@freebsd.org"
    DESCRIPTION
	    "The Begemot MIB for ATM interfaces."

    ::= { begemot 101 }

begemotAtmObjects	OBJECT IDENTIFIER ::= { begemotAtm 1 }

-- --------------------------------------------------------------------------

AtmESI ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS	current
    DESCRIPTION
	    "An ATM End System Identifier. This is basically the same as
	    an Ethernet Address and is assigned using the same rules."
    SYNTAX	OCTET STRING (SIZE(6))

-- --------------------------------------------------------------------------

--
-- Interfaces table
--
begemotAtmIfTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotAtmIfEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	    "This table contains an entry for each hardware ATM
	    interface. The table is indexed by the interface index."
    ::= { begemotAtmObjects 1 }

begemotAtmIfEntry OBJECT-TYPE
    SYNTAX	BegemotAtmIfEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	    "This is a table entry describing one ATM hardware interface."
    INDEX	{ ifIndex }
    ::= { begemotAtmIfTable 1 }

BegemotAtmIfEntry ::= SEQUENCE {
    begemotAtmIfName		DisplayString,
    begemotAtmIfPcr		Unsigned32,
    begemotAtmIfMedia		INTEGER,
    begemotAtmIfVpiBits		Unsigned32,
    begemotAtmIfVciBits		Unsigned32,
    begemotAtmIfMaxVpcs		Unsigned32,
    begemotAtmIfMaxVccs		Unsigned32,
    begemotAtmIfEsi		AtmESI,
    begemotAtmIfCarrierStatus	INTEGER,
    begemotAtmIfMode		INTEGER
}

begemotAtmIfName OBJECT-TYPE
    SYNTAX	DisplayString (SIZE(1..15))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "Name of the ATM interface."
    ::= { begemotAtmIfEntry 1 }

begemotAtmIfPcr OBJECT-TYPE
    SYNTAX	Unsigned32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The line cell rate of the interface."
    ::= { begemotAtmIfEntry 2 }

begemotAtmIfMedia OBJECT-TYPE
    SYNTAX	INTEGER {
			other(1),
			unknown(3),
			utp25(4),
			taxi100(5),
			taxi140(6),
			mm155(7),
			sm155(8),
			utp155(9),
			mm622(10),
			sm622(11),
			virtual(12)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The physical medium."
    ::= { begemotAtmIfEntry 3 }

begemotAtmIfVpiBits OBJECT-TYPE
    SYNTAX	Unsigned32 (0..12)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "Number of VPI bits that are used by the device."
    ::= { begemotAtmIfEntry 4 }

begemotAtmIfVciBits OBJECT-TYPE
    SYNTAX	Unsigned32 (0..16)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "Number of VCI bits that are used by the device."
    ::= { begemotAtmIfEntry 5 }

begemotAtmIfMaxVpcs OBJECT-TYPE
    SYNTAX	Unsigned32 (0..256)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The maximum number of VPC supported on this device. This may not
	    be larger than 2^begemotAtmIfVpiBits."
    ::= { begemotAtmIfEntry 6 }

begemotAtmIfMaxVccs OBJECT-TYPE
    SYNTAX	Unsigned32 (0..16777216)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The maximum number of VCC supported on this device. This may not
	    be larger than 2^(begemotAtmIfVpiBits + begemotAtmVciBits)."
    ::= { begemotAtmIfEntry 7 }

begemotAtmIfEsi OBJECT-TYPE
    SYNTAX	AtmESI
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The default End System Identifier as reported by the hardware.
	    If the hardware has no ESI all six bytes are reported as 0."
    ::= { begemotAtmIfEntry 8 }

begemotAtmIfCarrierStatus OBJECT-TYPE
    SYNTAX	INTEGER { carrierOn(1), carrierOff(2), unknown(3), none(4) }
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The state of the carrier. For interfaces which don't have the
	    notion of a carriere none is reported."
    ::= { begemotAtmIfEntry 9 }

begemotAtmIfMode OBJECT-TYPE
    SYNTAX	INTEGER { sonet(1), sdh(2), unknown(3) }
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	    "The mode of the SUNI interface. For interfaces without SUNI
	    unknown is reported in which case the variable is read-only.
	    Some types of interfaces may not be able to change this value."
    ::= { begemotAtmIfEntry 10 }

begemotAtmIfTableLastChange OBJECT-TYPE
    SYNTAX	TimeTicks
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The value of sysUpTime the last time that an entry in
	    begemotIfTable was created or destroyed. If the table is
	    unchanged since the last coldStart this value is zero."
    ::= { begemotAtmObjects 2 }

--
-- Interface hardware table
--
begemotAtmHWTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotAtmHWEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	    "This table augments the begemotAtmIfTable and contains an entry
	    for each hardware ATM interface. The entries describe the
	    ATM hardware interface."
    ::= { begemotAtmObjects 3 }

begemotAtmHWEntry OBJECT-TYPE
    SYNTAX	BegemotAtmHWEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	    "This is a table entry describing one ATM hardware interface."
    AUGMENTS	{ begemotAtmIfEntry }
    ::= { begemotAtmHWTable 1 }

BegemotAtmHWEntry ::= SEQUENCE {
    begemotAtmHWVendor		DisplayString,
    begemotAtmHWDevice		DisplayString,
    begemotAtmHWSerial		Unsigned32,
    begemotAtmHWVersion 	Unsigned32,
    begemotAtmHWSoftVersion	Unsigned32
}

begemotAtmHWVendor OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "A short string naming the vendor of the interface card."
    ::= { begemotAtmHWEntry 1 }

begemotAtmHWDevice OBJECT-TYPE
    SYNTAX	DisplayString
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "A short string naming the brand of the interface card."
    ::= { begemotAtmHWEntry 2 }

begemotAtmHWSerial OBJECT-TYPE
    SYNTAX	Unsigned32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The serial number of the interface card or 0 if it doesn't
	    report a serial number."
    ::= { begemotAtmHWEntry 3 }

begemotAtmHWVersion OBJECT-TYPE
    SYNTAX	Unsigned32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The hardware version of the interface card or 0 if it doesn't
	    report a hardware version number."
    ::= { begemotAtmHWEntry 4 }

begemotAtmHWSoftVersion OBJECT-TYPE
    SYNTAX	Unsigned32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	    "The firmware version of the interface card or 0 if it doesn't
	    report a firmware version number."
    ::= { begemotAtmHWEntry 5 }

-- --------------------------------------------------------------------

-- System specific parts
begemotAtmSysGroup	OBJECT IDENTIFIER ::= { begemotAtmObjects 4 }

END

Man Man