| Current Path : /usr/src/contrib/cvs/contrib/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/contrib/cvs/contrib/pvcs2rcs.in |
#! @PERL@
# ---------------------------------
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
###########################################################################
# FUNCTION:
# To recursively walk through a PVCS archive directory tree (archives
# located in VCS/ or vcs/ subdirectories) and convert them to RCS archives.
# The RCS archive name is the PVCS workfile name with ",v" appended.
#
# SYNTAX:
# pvcs_to_rcs.pl --help
#
# where -l indicates the operation is to be performed only in the current
# directory (no recursion)
#
# EXAMPLE:
# pvcs_to_rcs
# Would walk through every VCS or vcs subdir starting at the current directory,
# and produce corresponding RCS archives one level above the VCS or vcs subdir.
# (VCS/../RCS/)
#
# NOTES:
# * This script performs little error checking and logging
# (i.e. USE AT YOUR OWN RISK)
# * This script was last tested using ActiveState's port of Perl 5.005_02
# (internalcut #507) under Win95, though it does compile under Perl-5.00404
# for Solaris 2.4 run on a Solaris 2.6 system. The script crashed
# occasionally under ActiveState's port of Perl 5.003_07 but this stopped
# happening with the update so if you are having problems, try updating Perl.
# Upgrading to cut #507 also seemed to coincide with a large speed
# improvement, so try and keep up, hey? :) It was executed from MKS's
# UNIX tools version 6.1 for Win32's sh. ALWAYS redirect your output to
# a log!!!
# * PVCS archives are left intact
# * RCS archives are created in VCS/../RCS/ (or ./RCS using '-pflat')
# * Branch labels in this script will be attached to the CVS magic
# revision number. For branch a.b.c of a particular file, this means
# the label will be attached to revision a.b.0.c of the converted
# file. If you use the TrunkTip (1.*) label, be aware that it will convert
# to RCS revision 0.1, which is useless to RCS and CVS. You'll probably
# have to delete these.
# * All revisions are saved with correct "metadata" (i.e. check-in date,
# author, and log message). Any blank log message is replaced with
# "no comment". This is because RCS does not allow non-interactive
# check in of a new revision without a comment string.
# * Revision numbers are incremented by 1 during the conversion (since
# RCS does not allow revision 1.0).
# * All converted branch numbers are even (the CVS paradigm)
# * Version labels are assigned to the appropriate (incremented) revision
# numbers. PVCS allows spaces and periods in version labels while RCS
# does not. A global search and replace converts " " and "." to "_"
# There may be other cases that ought to be added.
# * Any working (checked-out) copies of PVCS archives
# within the VCS/../ or vcs/../ (or possibly ./ with '-pflat')
# will be deleted (or overwritten) depending on your mode of
# operation since the current ./ is used in the checkout of each revision.
# I suppose if development continues these files could be redirected to
# temp space rather than ./ .
# * Locks on PVCS archives should be removed (or the workfiles should be
# checked-in) prior to conversion, although the script will blaze through
# the archive nonetheless (But you would lose any checked out revision(s))
# * The -kb option is added to the RCS archive for workfiles with the following
# extensions: .bin .out .btl .rom .a07 .lib .exe .tco .obj .t8u .c8u .o .lku
# .a and a few others. The %bin_ext variable holds these values in regexp
# form.
# * the --force-binary option can be used to convert binary files which don't
# have proper extensions, but I'd *probably* edit the %bin_ext variable.
# * This script will abort occasionally with the error "invalid revision
# number". This is known to happen when a revision comment has
# /^\s*Rev/ (Perl regexp notation) in it. Fix the comment and start over.
# (The directory locks and existance checking make this a fairly quick
# process.)
# * This script writes lockfiles in the RCS/ directories. It will also not
# convert an archive if it finds the RCS Archive existant in the RCS/
# directory. This enables the conversion to quickly pick up where it left
# off after errors or interrupts occur. If you interrupt the script make
# sure you delete the last RCS Archive File which was being written.
# If you recieve the "Invalid revision number" error, then the RCS archive
# file for that particular PVCS file will not have been created yet.
# * This script will not create lockfiles when processing single
# filenames passed into the script, for hopefully obvious reasons.
# (lockfiles lock directories - DRP)
# * Log the output to a file. That makes it real easy to grep for errors
# later. (grep for "^[ \t]*(rcs|ci):" and be aware I might have missed
# a few cases (get? vcs?) !!!) *** Also note that this script will
# exibit some harmless RCS errors. Namely, it will attempt to lock
# branches which haven't been created yet. ***
# * I tried to keep the error and warning info up to date, but it seems
# to mean very little. This script almost always exits with a warning
# or an error that didn't seem to cause any harm. I didn't trace it
# and our imported source checks out and builds...
# It is probably happening when trying to convert empty directories
# or read files (possibly checked out workfiles ) which are not
# pvcs_archives.
# * You must use the -pflat option when processing single filenames
# passed as arguments to the script. This is probably a bug.
# * questions, comments, additions can be sent to info-cvs@nongnu.org
#########################################################################
#
# USER Configurables
#
# %bin_ext should be editable from the command line.
#
# NOTE: Each possible binary extension is listed as a Perl regexp
#
# The value associated with each regexp key is used to print a log
# message when a binary file is found.
my %bin_ext =
(
'\.(?i)bin$' => "Binary",
'\.(?i)out$' => "Default Compiler Output",
'\.(?i)btl$' => "",
'\.(?i)rom$' => "",
'\.(?i)a07$' => "",
'\.(?i)lib$' => "DOS/Wintel/Netware Compiler Library",
'\.(?i)lif$' => "Netware Binary File",
'\.(?i)exe$' => "DOS/Wintel Executable",
'\.(?i)tco$' => "",
'\.(?i)obj$' => "DOS/Wintel Compiler Object",
'\.(?i)res$' => "DOS/Wintel Resource File",
'\.(?i)ico$' => "DOS/Wintel Icon File",
'\.(?i)nlm$' => "Netware Loadable Module",
'\.(?i)t8u$' => "",
'\.(?i)c8u$' => "",
'\.(?i)lku$' => "",
'\.(?i)(bmp|gif|jpg|jpeg|jfif|tif|tiff|xbm)$' => "Image",
'\.(?i)dll$' => "DOS/Wintel Dynamically Linked Library",
'\.o$' => "UNIX Compiler Object",
'\.a$' => "UNIX Compiler Library",
'\.so(\.\d+\.\d+)?$' => "UNIX Shared Library"
);
# The binaries this script is dependant on:
my @bin_dependancies = ("vcs", "vlog", "rcs", "ci");
# Where we should put temporary files
my $tmpdir = $ENV{TMPDIR} ? $ENV{TMPDIR} : "/var/tmp";
# We use these...
use strict;
use Cwd;
use File::Path;
use IO::File;
use Getopt::Long;
$Getopt::Long::bundling = 1;
# $Getopt::Long::ignorecase = 0;
my $usage = "\
usage: $0 -h
$0 [-lt] [-i vcsid] [-r flat|leaf] [-p flat|leaf] [-x rcs_extension]
[-v none|locks|exists] [options] [path...]
";
my $help = "\
$usage
---------------------------- -----------------------------------
-h | --Help Print this text
General Settings
---------------------------- -----------------------------------
--Recurse Recurse through directories
(default)
-l | --NORecurse Process only .
--Errorfiles Save a count of conversion errors
in the RCS archive directory
(default) (unimplemented)
--NOErrorfiles Don't save a count of conversion
errors (unimplemented)
( -m | --Mode ) Convert Convert PVCS files to RCS files
(default)
( -m | --Mode ) Verify Perform verification ONLY (unimplemented)
( -v | --VERIfy ) None Always replace existing RCS files
( -v | --VERIfy ) LOCKS Same as exists unless a #conv.done
file exists in the RCS directory.
In that case, only the #conv.done
file's existance is verified for
that directory. (default)
( -v | --VERIfy ) Exists Don't replace existing RCS files
( -v | --VERIfy ) LOCKDates Verify that an existing RCS file's
last modification date is older
than that of the lockfile
(unimplemented)
( -v | --VERIfy ) Revs Verify that the PVCS archive files
and RCS archive file contain the
same number of corresponding
revisions. Add only new revisions
to the RCS file. (unimplemented)
( -v | --VERIfy ) Full Perform --verify=Revs and confirm
that the text of the revisions is
identical. Add only new revisions
unless an error is found. Then
erase the RCS archive and recreate
it. (unimplemented)
-t | --Test-binaries Use 'which' to check \$PATH for
the binaries required by this
script (default)
--NOTest-binaries Don't check for binaries
--VERBose Enable verbose output
--NOVerbose Disable verbose output (default)
-w | --Warnings Print warning messages (default)
--NOWarnings Don't print warning messages
RCS Settings
---------------------------- -----------------------------------
( -r | --RCS-Dirs ) leaf RCS files stored in ./RCS (default)
( -r | --RCS-Dirs ) flat RCS files stored in .
(unimplemented)
( -x | --RCS-Extension ) Set RCS file extension
(default = ',v')
--Force-binary Pass '-kb' to 'rcs -i' regardless of
the file extension
--NOForce-binary Only use '-kb' when the file has
a binary extension (default)
--Cvs-branch-labels Use CVS magic branch revision
numbers when attaching branch
labels (default)
--NOCvs-branch-labels Attach branch labels to RCS branch
revision numbers (unimplemented)
PVCS Settings
---------------------------- -----------------------------------
( -p | --Pvcs-dirs ) leaf PVCS files expected in ./VCS
(default)
( -p | --Pvcs-dirs ) flat PVCS files expected in .
( -i | --VCsid ) vcsid Use vcsid instead of \$VCSID
--------------------------------------------------------------------------
The optional path argument should contain the name of a file or directory
to convert. If not given, it will default to '.'.
--------------------------------------------------------------------------
";
#
# Initialize globals
#
my ($errors, $warnings) = (0, 0);
my ($curlevel, $maxlevel);
my ($rcs_base_command, $ci_base_command);
my ($donefile_name, $errorfile_name);
# set up the default options
my %options = (
recurse => 1,
mode => "convert",
errorfiles => 1,
'rcs-dirs' => "leaf",
'rcs-extension' => ",v",
'force-binary' => 0,
'cvs-branch-labels' => 1,
'pvcs-dirs' => "leaf",
verify => "locks",
'test-binaries' => 1,
vcsid => $ENV{VCSID} || "",
verbose => 0,
debug => 0,
warnings => 1
);
# This is untested except under Solaris 2.4 or 2.6 and
# may not be portable
#
# I think the readline lib or some such has an interface
# which may enable this now. The perl installer sure looks
# like it's testing this kind of thing, anyhow.
sub hit_any_key
{
STDOUT->autoflush;
system "stty", "-icanon", "min", "1";
print "Hit any key to continue...";
getc;
system "stty", "icanon", "min", "0";
STDOUT->autoflush (0);
print "\nI always wondered where that key was...\n";
}
# print the usage
sub print_usage
{
my $fh = shift;
unless (ref $fh)
{
my $fdn = $fh ? $fh : "STDERR";
$fh = new IO::File;
$fh->fdopen ($fdn, "w");
}
$fh->print ($usage);
}
# print the help
sub print_help
{
my $fh = shift;
unless (ref $fh)
{
my $fdn = $fh ? $fh : "STDOUT";
$fh = new IO::File;
$fh->fdopen ($fdn, "w");
}
$fh->print ($help);
}
# print the help and exit $_[0] || 0
sub exit_help
{
print_help;
exit shift || 0;
}
sub error_count
{
my $type = shift or die "$0: error - error_count usage: error_count type [, ref] [, LIST]\n";
my $error_count_ref;
my $outstring;
if (ref ($_[0]) && ref ($_[0]) == "SCALAR")
{
$error_count_ref = shift;
}
else
{
$error_count_ref = \$errors;
}
$$error_count_ref++;
push @_, "something wrong.\n" unless ( @_ > 0 );
$outstring = sprintf "$0: $type - " . join ("", @_);
$outstring .= sprintf " - $!\n" unless ($outstring =~ /\n$/);
print STDERR $outstring;
if ($options{errorfiles})
{
my $fh = new IO::File ">>$errorfile_name" or new IO::File ">$errorfile_name";
if ($fh)
{
$fh->print ($$error_count_ref . "\n");
$fh->print ($outstring);
$fh->close;
}
else
{
my $cd = cwd;
print STDERR "$0: error - failed to open errorfile $cd/$errorfile_name - $!\n"
if ($options{debug});
}
}
return $$error_count_ref;
}
# the main procedure that is run once in each directory
sub execdir
{
my $dir = shift;
my ($errors, $warnings) = (0, 0); # We return these error counters
my $old_dir = cwd;
local ($_, @_);
my $i; # Generic counter
my ($pvcsarchive, $workfile, $rcsarchive); # .??v, checked out file, and ,v files,
# respectively
my ($rev_count, $first_vl, $last_vl, $description,
$rev_index, @rev_num, %checked_in, %author,
$relative_comment_index, @comment_string,
%comment);
my ($num_version_labels, $label_index, @label_revision, $label,
@new_label, $rcs_rev);
my ($revision, %rcs_rev_num);
my ($get_output, $rcs_output, $ci_output, $mv_output);
my ($ci_command, $rcs_command, $wtr);
my @hits;
my ($num_fields);
my $skipdirlock; # if true, don't write conv.out
# used only for single file operations
# at the moment
my $cd;
my @filenames;
# We may have recieved a single file name to process...
if ( -d $dir )
{
# change into the directory to be processed
# open the current directory for listing
# initialize the list of filenames
# and set filenames equal to directory listing
unless ( ( chdir $dir ) and ( opendir CURDIR, "." ) and ( @filenames = readdir CURDIR ) )
{
$cd = cwd;
error_count 'error', \$errors, "skipping directory $dir from $cd";
chdir $old_dir or die "Failed to restore original directory ($old_dir): ", $!, ", stopped";
return ($errors, $warnings);
}
# clean up by closing the directory
closedir(CURDIR);
}
elsif ( -f $dir ) # we recieved a single file
{
push @filenames, $dir;
$skipdirlock = 1;
}
else
{
$cd = cwd;
error_count 'error', \$errors, "no such directory/file $dir from $cd\n";
# chdir $old_dir or die "Failed to restore original directory ($old_dir): ", $!, ", stopped";
return ($errors, $warnings);
}
# save the current directory
$cd = cwd;
# increment the global $curlevel variable
$curlevel = $curlevel +1;
# initialize a list for any subdirectories and any files
# we need to process
my $vcsdir = "";
my (@subdirs, $fn, $file, @files, @pvcsarchives);
# print "$cd: " . join (", ", @filenames) . "\n";
# hit_any_key;
(@files, @pvcsarchives) = ( (), () );
# begin a for loop to execute on each filename in the list @filename
foreach $fn (@filenames)
{
# if the file is a directory...
if (-d $fn)
{
# then if we are not expecting a flat arrangement of pvcs files
# and we found a vcs directory add its files to @pvcsarchives
if (!$options{'pvcs-dirs-flat'} and $fn =~ /^vcs$/i)
{
if ($options{verify} =~ /^locks$/ ) {
if ( -f $donefile_name ) {
print "Verified existence of lockfile $cd/$donefile_name."
. ( ($options{mode} =~ /^convert$/) ? " Skipping directory." : "" )
. "\n" if ($options{verbose});
next;
} elsif ( $options{mode} =~ /^verify$/ ) {
print "No lockfile found for $cd .\n";
next;
}
}
# else add the files in the vcs dir to our list of files to process
error_count 'warning', \$warnings, "Found two vcs dirs in directory $cd.\n"
if ($vcsdir and $options{warnings});
$vcsdir = $fn;
unless ( ( opendir VCSDIR, $vcsdir ) and ( @files = readdir VCSDIR ) )
{
error_count 'error', \$errors, "skipping directory &cd/$fn";
next;
}
closedir VCSDIR;
# and so we don't need to worry about where these
# files came from later...
foreach $file (@files)
{
push @pvcsarchives, "$vcsdir/$file" if (-f "$vcsdir/$file");
}
# don't want recursion here...
@pvcsarchives = grep !/^\.\.?$/, @pvcsarchives;
}
elsif ($fn !~ /^\.\.?$/)
{
next if (!$options{'rcs-dirs-flat'} and $fn =~ /^rcs$/i);
# include it in @subdir if it's not a parent directory
push(@subdirs,$fn);
}
}
# else if we are processing a flat arrangement of pvcs files...
elsif ($options{'pvcs-dirs-flat'} and -f $fn)
{
if ($options{verify} =~ /^locks$/) {
if ( -f $donefile_name) {
print "Found lockfile $cd/$donefile_name."
. ( ($options{mode} =~ /^convert$/) ? " Skipping directory." : "" )
. "\n" if ($options{verbose});
last;
} elsif ($options{mode} =~ /^verify$/) {
print "No lockfile found for $cd .\n";
last;
}
}
# else add this to the list of files to process
push (@pvcsarchives, $fn);
}
}
# print "pvcsarchives: " . join (", ", @pvcsarchives) . "\n";
# print "subdirs: " . join (", ", @subdirs) . "\n";
# hit_any_key;
# for loop of subdirs
foreach (@subdirs)
{
# run execdir on each sub dir
if ($maxlevel >= $curlevel)
{
my ($e, $w) = execdir ($_);
$errors += $e;
$warnings += $w;
}
}
# Print output header for each directory
print("Directory: $cd\n");
# the @files variable should already contain the list of files
# we should attempt to process
if ( @pvcsarchives && ( $options{mode} =~ /^convert$/ ) )
{
# create an RCS directory in parent to store RCS files in
if ( !( $options{'rcs-dirs-flat'} or (-d "RCS") or mkpath ( "RCS" ) ) )
{
error_count 'error', \$errors, "failed to make directory $cd/RCS - skipping directory $cd";
@pvcsarchives = ();
# after all, we have nowhere to put them...
}
}
# begin a for loop to execute on each filename in the list @files
foreach $pvcsarchive (@pvcsarchives)
{
my $got_workfile = 0;
my $got_version_labels = 0;
my $got_description = 0;
my $got_rev_count = 0;
my $abs_file = $cd . "/" . $pvcsarchive;
print("Verifying $abs_file...\n") if ($options{verbose});
print "vlog $pvcsarchive\n";
my $vlog_output = `vlog $pvcsarchive`;
$_ = $vlog_output;
# Split the vcs status output into individual lines
my @vlog_strings = split /\n/;
my $num_vlog_strings = @vlog_strings;
$_ = $vlog_strings[0];
if ( /^\s*$/ || /^vlog: warning/ )
{
error_count 'warning', \$warnings, "$abs_file is NOT a valid PVCS archive!!!\n";
next;
}
my $num;
# Collect all vlog output into appropriate variables
#
# This will ignore at the very least the /^\s*Archive:\s*/ field
# and maybe more. This should not be a problem.
for ( $num = 0; $num < $num_vlog_strings; $num++ )
{
# print("$vlog_strings[$num]\n");
$_ = $vlog_strings[$num];
if( ( /^Workfile:\s*/ ) && (!$got_workfile ) )
{
my $num_fields;
$got_workfile = 1;
# get the string to the right of the above search (with any path stripped)
$workfile = $';
$_ = $workfile;
$num_fields = split /[\/\\]/;
if ( $num_fields > 1 )
{
$workfile = $_[$num_fields - 1 ];
}
$rcsarchive = $options{'rcs-dirs-flat'} ? "" : "RCS/";
$rcsarchive .= $workfile;
$rcsarchive .= $options{'rcs-extension'} if ($options{'rcs-extension'});
print "Workfile is $workfile\n" if ($options{debug});
}
elsif ( ( /^Rev count:\s*/ ) && (!$got_rev_count ) )
{
$got_rev_count = 1;
# get the string to the right of the above search
$rev_count = $';
print "Revision count is $rev_count\n";
}
elsif ( ( /^Version labels:\s*/ ) && (!$got_version_labels ) )
{
$got_version_labels = 1;
$first_vl = $num+1;
print "Version labels start at $first_vl\n" if ($options{debug});
}
elsif ( ( /^Description:\s*/ ) && (!$got_description ) )
{
$got_description = 1;
$description = "\"" . $vlog_strings[$num+1] . "\"";
print "Description is $description\n" if ($options{debug});
$last_vl = $num - 1;
}
elsif ( /^Rev\s+/ ) # get all the revision information at once
{
$rev_index = 0;
@rev_num = ();
while ( $rev_index < $rev_count )
{
$_ = $vlog_strings[$num];
/^\s*Rev\s+(\d+\.(\d+\.\d+\.)*\d+)$/;
$rev_num[$rev_index] = $1;
print "Found revision: $rev_num[$rev_index]\n" if ($options{debug});
die "Not a valid revision ($rev_num[$rev_index]).\n"
if ($rev_num[$rev_index] !~ /^(\d+\.)(\d+\.\d+\.)*\d+$/);
$_ = $vlog_strings[$num+1];
/^\s*Locked\s*/ and $num++;
$_ = $vlog_strings[$num+1];
/^\s*Checked in:\s*/;
$checked_in{$rev_num[$rev_index]} = "\"" . $' . "\"";
print "Checked in: $checked_in{$rev_num[$rev_index]}\n" if ($options{debug});
$_ = $vlog_strings[$num+3];
/^\s*Author id:\s*/;
split;
$author{$rev_num[$rev_index]} = "\"" . $_[2] . "\"";
print "Author: $author{$rev_num[$rev_index]}\n" if ($options{debug});
my @branches = ();
$_ = $vlog_strings[$num+1];
if (/^\s*Branches:\s*/)
{
$num++;
@branches = split /\s+/, $';
}
$relative_comment_index = 0;
@comment_string = ();
while( ( ( $num + 4 + $relative_comment_index ) < @vlog_strings)
&& ( $vlog_strings[$num+4+$relative_comment_index]
!~ /^\s*Rev\s+(\d+\.(\d+\.\d+\.)*\d+)$/ ) )
{
# We need the \n added for multi-line comments. There is no effect for
# single-line comments since RCS inserts the \n if it doesn't exist already
# print "Found commment line: $vlog_strings[$num+4+$relative_comment_index]\n"
# if ($options{debug});
push @comment_string, $vlog_strings[$num+4+$relative_comment_index], "\n";
$relative_comment_index += 1;
}
# print "Popped from comment: " . join ("", splice (@comment_string, -2))
# . "\n"
# if ($options{debug});
# Pop the "-+" or "=+" line from the comment
while ( (pop @comment_string) !~ /^-{35}|={35}$/ )
{}
$comment{$rev_num[$rev_index]} = join "", @comment_string;
$num += ( 4 + $relative_comment_index );
print "Got comment for $rev_num[$rev_index]\n" if ($options{debug});
print "comment string: $comment{$rev_num[$rev_index]}\n" if ($options{debug});
$rev_index += 1;
} # while ( $rev_index < $rev_count )
$num -= 1; #although there should be nothing left for this to matter
} # Get Rev information
} # for ($num = 0; $num < $num_vlog_strings; $num++)
# hit_any_key if ($options{debug});
# Create RCS revision numbers corresponding to PVCS version numbers
foreach $revision (@rev_num)
{
$rcs_rev_num{ $revision } = &pvcs_to_rcs_rev_number( $revision );
print"PVCS revision is $revision; RCS revision is $rcs_rev_num{ $revision }\n"
if ($options{debug});
}
# Sort the revision numbers - PVCS and RCS store them in different orders
# Clear @_ so we don't pass anything in by accident...
@_ = ();
@rev_num = sort revisions @rev_num;
print "Sorted rev_nums:\n" . join ("\n", @rev_num) . "\n" if ($options{debug});
# hit_any_key;
# Loop through each version label, checking for need to relabel ' ' with '_'.
$num_version_labels = $last_vl - $first_vl + 1;
print "Version label count is $num_version_labels\n";
for( $i = $first_vl; $i <= $last_vl; $i += 1 )
{
# print("$vlog_strings[$i]\n");
$label_index = $i - $first_vl;
$_=$vlog_strings[$i];
print "Starting with string '$_'\n" if ($options{debug});
split /\"/;
$label = $_[1];
print "Got label '$label'\n" if ($options{debug});
split /\s+/, $_[2];
$label_revision[$label_index] = $_[2];
print "Original label is $label_revision[$label_index]\n" if ($options{debug});
# Create RCS revision numbers corresponding to PVCS version numbers by
# adding 1 to the revision number (# after last .)
$label_revision[ $label_index ] = pvcs_to_rcs_rev_number( $label_revision [ $label_index ] );
# replace ' ' with '_', if needed
$_=$label;
$new_label[$label_index] = $label;
$new_label[$label_index] =~ s/ /_/g;
$new_label[$label_index] =~ s/\./_/g;
$new_label[$label_index] = "\"" . $new_label[$label_index] . "\"";
print"Label $new_label[$label_index] is for revision $label_revision[$label_index]\n" if ($options{debug});
}
##########
#
# See if the RCS archive is up to date with the PVCS archive
#
##########
if ($options{verify} =~ /^locks|exists$/ and -f $rcsarchive)
{
print "Verified existence of $cd/$rcsarchive."
. ( ($options{mode} =~ /^convert$/) ? " Skipping." : "" )
. "\n" if ($options{verbose});
next;
}
# Create RCS archive and check in all revisions, then label.
my $first_time = 1;
foreach $revision (@rev_num)
{
# print "get -p$revision $pvcsarchive >$workfile\n";
print "get -r$revision $pvcsarchive\n";
# $vcs_output = `vcs -u -r$revision $pvcsarchive`;
# $get_output = `get -p$revision $pvcsarchive >$workfile`;
$get_output = `get -r$revision $pvcsarchive`;
# if this is the first time, delete the rcs archive if it exists
# need for $options{verify} == none
unlink $rcsarchive if ($first_time and $options{verify} =~ /^none$/ and -f $rcsarchive);
# Also check here whether this file ought to be "binary"
if ( $first_time )
{
$rcs_command = "$rcs_base_command -i";
if ( ( @hits = grep { $workfile =~ /$_/ } keys %bin_ext ) || $options{'force-binary'} )
{
$rcs_command .= " -kb";
$workfile =~ /$hits[0]/ if (@hits);
print "Binary attribute -kb added ("
. (@hits ? "file type is '$bin_ext{$hits[0]}' for extension '$&'" : "forced")
. ")\n";
}
$first_time and $ci_command .= " -t-$description";
$rcs_command .= " $workfile";
# print and execute the rcs archive initialization command
print "$rcs_command\n";
$wtr = new IO::File "|$rcs_command";
$wtr->print ($description);
$wtr->print ("\n") unless ($description =~ /\n$/s);
$wtr->print (".\n");
$wtr->close;
# $rcs_output = `$rcs_base_command -i -kb $workfile`;
}
# if this isn't the first time, we need to lock the rcs branch
#
# This is a little messy, but it works. Some extra locking is attempted.
# (This happens the first time a branch is used, at the least)
my $branch = "";
my @branch;
@branch = split /\./, $rcs_rev_num{$revision};
pop @branch;
$branch = join ".", @branch;
$rcs_output = `$rcs_base_command -l$branch $workfile` if (!$first_time);
# If an empty comment is specified, RCS will not check in the file;
# check for this case. (but an empty -t- description is fine - go figure!)
# Since RCS will pause and ask for a comment if one is not given,
# substitute a dummy comment "no comment".
$comment{$revision} =~ /^\s*$/ and $comment{$revision} = "no comment\n";
$ci_command = $ci_base_command;
$ci_command .= " -f -r$rcs_rev_num{$revision} -d$checked_in{$revision}"
. " -w$author{$revision}";
$ci_command .= " $workfile";
# print and execute the ci command
print "$ci_command\n";
$wtr = new IO::File "|$ci_command";
$wtr->print ($comment{$revision});
$wtr->print ("\n") unless ($comment{$revision} =~ /\n$/s);
$wtr->print (".\n");
$wtr->close;
# $ci_output = `$ci_command`;
# $ci_output = `cat $tmpdir/ci.out`;
$first_time = 0 if ($first_time);
} # foreach revision
# Attach version labels
for( $i = $num_version_labels - 1; $i >= 0; $i -= 1 )
{
# print "rcs -x,v -n$new_label[$i]:$label_revision[$i] $workfile\n";
$rcs_output = `$rcs_base_command -n$new_label[$i]:$label_revision[$i] $workfile`;
print "Version label $new_label[$i] added to revision $label_revision[$i]\n";
} # foreach label
# hit_any_key;
} # foreach pvcs archive file
# We processed a vcs directory, so if there were any files, lock it.
# We are guaranteed to have made the attempt at
#
# $skipdirlock gets set if a single file name was passed to this function to enable
# a '$0 *' operation...
if ( @pvcsarchives && !$skipdirlock)
{
my $fh = new IO::File ">>$donefile_name" or new IO::File ">$donefile_name";
if ($fh)
{
$fh->close;
}
else
{
error_count 'error', \$errors, "couldn't create lockfile $cd/$donefile_name";
}
}
$curlevel = $curlevel - 1;
chdir $old_dir or die "Failed to restore original directory ($old_dir): ", $!, ", stopped";
return ($errors, $warnings);
}
#
# This function effectively does a cmp between two revision numbers
# It is intended to be passed into Perl's sort routine.
#
# the pvcs_out is not implemented well. It should probably be
# returnning $b[0] <=> $a[0] rather than $a[0] <=> $b[0]
#
# The @_ argument implementation was going to be used for revision
# comparison as an aid to remove the /^\sRev/ in revision comment
# error. The effort was fruitless at the time.
sub revisions
{
my @a = split /\./, (defined $a) ? $a : shift;
my @b = split /\./, (defined $b) ? $b : shift;
my $function = @_ ? shift : 'rcs_in';
my ($i, $ret_val);
die "Not enough arguments to revisions : a = ", join (".", @a),
"; b = ", join (".", @b), ", stopped"
unless (@a and @b);
for ($i = 0; $i < scalar( @a ) && $i < scalar( @b ); $i++)
{
$a[$i] == $b[$i] or return ($a[$i] <=> $b[$i]);
}
return 0 if (scalar (@a) == scalar (@b));
if ($function eq 'rcs_in')
{
return (($i == @b) || -1);
}
elsif ($function eq 'pvcs_out')
{
return (($i == @a) || -1);
}
else
{
die "error - Invalid function type passed to revisions ($function)", ", stopped";
}
}
sub pvcs_to_rcs_rev_number
{
my($input, $num_fields, @rev_string, $return_rev_num, $i);
$input = $_[0];
$_ = $input;
$num_fields = split /\./;
@rev_string = @_;
# @rev_string[$num_fields-1] += 1;
for( $i = 1; $i < $num_fields; $i += 1 )
{
if ( $i % 2 )
{
# DRP: 10/1
# RCS does not allow revision zero
$rev_string[ $i ] += 1;
}
elsif ( $i )
{
# DRP: 10/1
# Branches must have even references for compatibility
# with CVS's magic branch numbers.
# (Indexes 2, 4, 6...)
$rev_string[ $i ] *= 2;
}
}
# If this is a branch revision # (PVCS: a.b.c.*) then we want the CVS
# revision # instead. It's okay to do this conversion here since we
# never commit to branches. We'll only get a PVCS revision # in that
# form when looking through the revision labels.
if ($input =~ /\*$/)
{
pop @rev_string;
push @rev_string, splice (@rev_string, -1, 1, "0");
}
$return_rev_num = join ".", @rev_string;
return $return_rev_num;
}
###
###
###
###
###
### MAIN program: checks to see if there are command line parameters
###
###
###
###
###
# and read the options
die $usage unless GetOptions (\%options, "h|help" => \&exit_help,
"recurse!", "mode|m=s", "errorfiles!", "l", "rcs-dirs|rcs-directories|r=s",
"pvcs-dirs|pvcs-directories|p=s", "test-binaries|t!",
"rcs-extension=s", "verify|v=s", "vcsid|i=s", "verbose!", "debug!",
"force-binary!", "cvs-branch-labels!", "warnings|w!");
#
# Special processing for -l !^#%$^@#$%#$
#
# At the moment, -l overrides --recurse, regardless of the order the
# options were passed in
#
$options{recurse} = 0 if defined $options{l};
delete $options{l};
# Make sure we got acceptable values for rcs-dirs and pvcs-dirs
my @hits = grep /^$options{'rcs-dirs'}/i, ("leaf", "flat");
@hits == 1 or die
"$0: $options{'rcs-dirs'} invalid argument to --rcs-dirs or ambiguous\n"
. " abbreviation.\n"
. " Must be one of: 'leaf' or 'flat'.\n"
. $usage;
$options{'rcs-dirs'} = $hits[0];
$options{'rcs-dirs-flat'} = ($options{'rcs-dirs'} =~ /flat/);
delete $options{'rcs-dirs'};
@hits = grep /^$options{'pvcs-dirs'}/i, ("leaf", "flat");
@hits == 1 or die
"$0: $options{'pvcs-dirs'} invalid argument to --pvcs-dirs or ambiguous\n"
. " abbreviation.\n"
. " Must be one of: 'leaf' or 'flat'.\n"
. $usage;
$options{'pvcs-dirs'} = $hits[0];
$options{'pvcs-dirs-flat'} = ($options{'pvcs-dirs'} =~ /flat/);
delete $options{'pvcs-dirs'};
# and for verify
@hits = grep /^$options{verify}/i, ("none", "locks", "exists", "lockdates", "revs", "full");
@hits == 1 or die
"$0: $options{verify} invalid argument to --verify or ambiguous\n"
. " abbreviation.\n"
. " Must be one of: 'none', 'locks', 'exists', 'lockdates', 'revs',\n"
. " or 'full'.\n"
. $usage;
$options{verify} = $hits[0];
$options{verify} =~ /^none|locks|exists$/ or die
"$0: --verify=$options{verify} unimplemented.\n"
. $usage;
# and mode
@hits = grep /^$options{mode}/i, ("convert", "verify");
@hits == 1 or die
"$0: $options{mode} invalid argument to --mode or ambiguous abbreviation.\n"
. " Must be 'convert' or 'verify'.\n"
. $usage;
$options{mode} = $hits[0];
$options{'cvs-branch-labels'} or die
"$0: RCS Branch Labels unimplemented.\n"
. $usage;
# export VCSID into th environment for ourselves and our children
$ENV{VCSID} = $options{vcsid};
#
# Verify we have all the binary executables we need to run this script
#
# Allowed this feature to be disabled in case which is missing or we are
# running on a system which does not return error codes properly (e.g. WIN95)
#
# -- i.e. I don't feel like grepping output yet. --
#
my @missing_binaries = ();
if ($options{'test-binaries'})
{
foreach (@bin_dependancies)
{
if (system "which", $_)
{
push @missing_binaries, $_;
}
}
if (scalar @missing_binaries)
{
print STDERR "The following executables were not found in your PATH: "
. join ( " ", @missing_binaries )
. "\n"
. "You must correct this before continuing.\n";
exit 1;
}
}
delete $options{'test-binaries'};
#
# set up our base archive manipulation commands
#
# set up our rcs_command mods
$rcs_base_command = "rcs";
$rcs_base_command .= " -x$options{'rcs-extension'}" if ($options{'rcs-extension'});
# set up our rcs_command mods
$ci_base_command = "ci";
$ci_base_command .= " -x$options{'rcs-extension'}" if ($options{'rcs-extension'});
#
# So our logs fill in a manner we can monitor with 'tail -f' fairly easily:
#
STDERR->autoflush (1);
STDOUT->autoflush (1);
# Initialize the globals we use to keep track of recursion
if ($options{recurse})
{
$maxlevel = 10000; # Arbitrary recursion limit
}
else
{
$maxlevel = 1;
}
delete $options{recurse};
# So we can lock the directories behind us
$donefile_name = $options{'rcs-dirs-flat'} ? "" : "RCS/";
$errorfile_name = $donefile_name . "#conv.errors";
$donefile_name .= "#conv.done";
#
# start the whole thing and drop the return code on exit
#
push (@ARGV, ".") unless (@ARGV);
while ($_ = shift)
{
# reset the recursion level (corresponds to directory depth)
# level 0 is the first directory we enter...
$curlevel = -1;
my ($e, $w) = execdir($_);
$errors += $e;
$warnings += $w;
}
print STDERR "$0: " . ($errors ? "Aborted" : "Done") . ".\n";
print STDERR "$0: ";
print STDERR ($errors ? $errors : "No") . " error" . (($errors != 1) ? "s" : "");
print STDERR ", " . ($warnings ? $warnings : "no") . " warning" . (($warnings != 1) ? "s" : "")
if ($options{warnings});
print STDERR ".\n";
#
# Woo-hoo! We made it!
#
exit $errors;