| Current Path : /usr/src/contrib/cvs/src/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/contrib/cvs/src/logmsg.c |
/*
* Copyright (C) 1986-2005 The Free Software Foundation, Inc.
*
* Portions Copyright (C) 1998-2005 Derek Price, Ximbiot <http://ximbiot.com>,
* and others.
*
* Portions Copyright (C) 1992, Brian Berliner and Jeff Polk
* Portions Copyright (C) 1989-1992, Brian Berliner
*
* You may distribute under the terms of the GNU General Public License as
* specified in the README file that comes with the CVS source distribution.
*
* $FreeBSD: release/9.1.0/contrib/cvs/src/logmsg.c 175274 2008-01-13 06:09:41Z obrien $
*/
#include <assert.h>
#include "cvs.h"
#include "getline.h"
static int find_type PROTO((Node * p, void *closure));
static int fmt_proc PROTO((Node * p, void *closure));
static int logfile_write PROTO((const char *repository, const char *filter,
const char *message, FILE * logfp,
List * changes));
static int rcsinfo_proc PROTO((const char *repository, const char *template));
static int title_proc PROTO((Node * p, void *closure));
static int update_logfile_proc PROTO((const char *repository,
const char *filter));
static void setup_tmpfile PROTO((FILE * xfp, char *xprefix, List * changes));
static int editinfo_proc PROTO((const char *repository, const char *template));
static int verifymsg_proc PROTO((const char *repository, const char *script));
static FILE *fp;
static char *str_list;
static char *str_list_format; /* The format for str_list's contents. */
static char *editinfo_editor;
static char *verifymsg_script;
static Ctype type;
/*
* Should the logmsg be re-read during the do_verify phase?
* RereadLogAfterVerify=no|stat|yes
* LOGMSG_REREAD_NEVER - never re-read the logmsg
* LOGMSG_REREAD_STAT - re-read the logmsg only if it has changed
* LOGMSG_REREAD_ALWAYS - always re-read the logmsg
*/
int RereadLogAfterVerify = LOGMSG_REREAD_ALWAYS;
/*
* Puts a standard header on the output which is either being prepared for an
* editor session, or being sent to a logfile program. The modified, added,
* and removed files are included (if any) and formatted to look pretty. */
static char *prefix;
static int col;
static char *tag;
static void
setup_tmpfile (xfp, xprefix, changes)
FILE *xfp;
char *xprefix;
List *changes;
{
/* set up statics */
fp = xfp;
prefix = xprefix;
type = T_MODIFIED;
if (walklist (changes, find_type, NULL) != 0)
{
(void) fprintf (fp, "%sModified Files:\n", prefix);
col = 0;
(void) walklist (changes, fmt_proc, NULL);
(void) fprintf (fp, "\n");
if (tag != NULL)
{
free (tag);
tag = NULL;
}
}
type = T_ADDED;
if (walklist (changes, find_type, NULL) != 0)
{
(void) fprintf (fp, "%sAdded Files:\n", prefix);
col = 0;
(void) walklist (changes, fmt_proc, NULL);
(void) fprintf (fp, "\n");
if (tag != NULL)
{
free (tag);
tag = NULL;
}
}
type = T_REMOVED;
if (walklist (changes, find_type, NULL) != 0)
{
(void) fprintf (fp, "%sRemoved Files:\n", prefix);
col = 0;
(void) walklist (changes, fmt_proc, NULL);
(void) fprintf (fp, "\n");
if (tag != NULL)
{
free (tag);
tag = NULL;
}
}
}
/*
* Looks for nodes of a specified type and returns 1 if found
*/
static int
find_type (p, closure)
Node *p;
void *closure;
{
struct logfile_info *li = p->data;
if (li->type == type)
return (1);
else
return (0);
}
/*
* Breaks the files list into reasonable sized lines to avoid line wrap...
* all in the name of pretty output. It only works on nodes whose types
* match the one we're looking for
*/
static int
fmt_proc (p, closure)
Node *p;
void *closure;
{
struct logfile_info *li;
li = p->data;
if (li->type == type)
{
if (li->tag == NULL
? tag != NULL
: tag == NULL || strcmp (tag, li->tag) != 0)
{
if (col > 0)
(void) fprintf (fp, "\n");
(void) fputs (prefix, fp);
col = strlen (prefix);
while (col < 6)
{
(void) fprintf (fp, " ");
++col;
}
if (li->tag == NULL)
(void) fprintf (fp, "No tag");
else
(void) fprintf (fp, "Tag: %s", li->tag);
if (tag != NULL)
free (tag);
tag = xstrdup (li->tag);
/* Force a new line. */
col = 70;
}
if (col == 0)
{
(void) fprintf (fp, "%s\t", prefix);
col = 8;
}
else if (col > 8 && (col + (int) strlen (p->key)) > 70)
{
(void) fprintf (fp, "\n%s\t", prefix);
col = 8;
}
(void) fprintf (fp, "%s ", p->key);
col += strlen (p->key) + 1;
}
return (0);
}
/*
* Builds a temporary file using setup_tmpfile() and invokes the user's
* editor on the file. The header garbage in the resultant file is then
* stripped and the log message is stored in the "message" argument.
*
* If REPOSITORY is non-NULL, process rcsinfo for that repository; if it
* is NULL, use the CVSADM_TEMPLATE file instead. REPOSITORY should be
* NULL when running in client mode.
*/
void
do_editor (dir, messagep, repository, changes)
const char *dir;
char **messagep;
const char *repository;
List *changes;
{
static int reuse_log_message = 0;
char *line;
int line_length;
size_t line_chars_allocated;
char *fname;
struct stat pre_stbuf, post_stbuf;
int retcode = 0;
assert (!current_parsed_root->isremote != !repository);
if (noexec || reuse_log_message)
return;
/* Abort creation of temp file if no editor is defined */
if (strcmp (Editor, "") == 0 && !editinfo_editor)
error(1, 0, "no editor defined, must use -e or -m");
/* Create a temporary file */
/* FIXME - It's possible we should be relying on cvs_temp_file to open
* the file here - we get race conditions otherwise.
*/
fname = cvs_temp_name ();
again:
if ((fp = CVS_FOPEN (fname, "w+")) == NULL)
error (1, 0, "cannot create temporary file %s", fname);
if (*messagep)
{
(void) fputs (*messagep, fp);
if ((*messagep)[0] == '\0' ||
(*messagep)[strlen (*messagep) - 1] != '\n')
(void) fprintf (fp, "\n");
}
else
(void) fprintf (fp, "\n");
if (repository != NULL)
/* tack templates on if necessary */
(void) Parse_Info (CVSROOTADM_RCSINFO, repository, rcsinfo_proc, 1);
else
{
FILE *tfp;
char buf[1024];
size_t n;
size_t nwrite;
/* Why "b"? */
tfp = CVS_FOPEN (CVSADM_TEMPLATE, "rb");
if (tfp == NULL)
{
if (!existence_error (errno))
error (1, errno, "cannot read %s", CVSADM_TEMPLATE);
}
else
{
while (!feof (tfp))
{
char *p = buf;
n = fread (buf, 1, sizeof buf, tfp);
nwrite = n;
while (nwrite > 0)
{
n = fwrite (p, 1, nwrite, fp);
nwrite -= n;
p += n;
}
if (ferror (tfp))
error (1, errno, "cannot read %s", CVSADM_TEMPLATE);
}
if (fclose (tfp) < 0)
error (0, errno, "cannot close %s", CVSADM_TEMPLATE);
}
}
(void) fprintf (fp,
"%s----------------------------------------------------------------------\n",
CVSEDITPREFIX);
(void) fprintf (fp,
"%sEnter Log. Lines beginning with `%.*s' are removed automatically\n%s\n",
CVSEDITPREFIX, CVSEDITPREFIXLEN, CVSEDITPREFIX,
CVSEDITPREFIX);
if (dir != NULL && *dir)
(void) fprintf (fp, "%sCommitting in %s\n%s\n", CVSEDITPREFIX,
dir, CVSEDITPREFIX);
if (changes != NULL)
setup_tmpfile (fp, CVSEDITPREFIX, changes);
(void) fprintf (fp,
"%s----------------------------------------------------------------------\n",
CVSEDITPREFIX);
/* finish off the temp file */
if (fclose (fp) == EOF)
error (1, errno, "%s", fname);
if ( CVS_STAT (fname, &pre_stbuf) == -1)
pre_stbuf.st_mtime = 0;
if (editinfo_editor)
free (editinfo_editor);
editinfo_editor = (char *) NULL;
if (!current_parsed_root->isremote && repository != NULL)
(void) Parse_Info (CVSROOTADM_EDITINFO, repository, editinfo_proc, 0);
/* run the editor */
run_setup (editinfo_editor ? editinfo_editor : Editor);
run_arg (fname);
if ((retcode = run_exec (RUN_TTY, RUN_TTY, RUN_TTY,
RUN_NORMAL | RUN_SIGIGNORE)) != 0)
error (editinfo_editor ? 1 : 0, retcode == -1 ? errno : 0,
editinfo_editor ? "Logfile verification failed" :
"warning: editor session failed");
/* put the entire message back into the *messagep variable */
fp = open_file (fname, "r");
if (*messagep)
free (*messagep);
if ( CVS_STAT (fname, &post_stbuf) != 0)
error (1, errno, "cannot find size of temp file %s", fname);
if (post_stbuf.st_size == 0)
*messagep = NULL;
else
{
/* On NT, we might read less than st_size bytes, but we won't
read more. So this works. */
*messagep = (char *) xmalloc (post_stbuf.st_size + 1);
(*messagep)[0] = '\0';
}
line = NULL;
line_chars_allocated = 0;
if (*messagep)
{
size_t message_len = post_stbuf.st_size + 1;
size_t offset = 0;
while (1)
{
line_length = getline (&line, &line_chars_allocated, fp);
if (line_length == -1)
{
if (ferror (fp))
error (0, errno, "warning: cannot read %s", fname);
break;
}
if (strncmp (line, CVSEDITPREFIX, CVSEDITPREFIXLEN) == 0)
continue;
if (offset + line_length >= message_len)
expand_string (messagep, &message_len,
offset + line_length + 1);
(void) strcpy (*messagep + offset, line);
offset += line_length;
}
}
if (fclose (fp) < 0)
error (0, errno, "warning: cannot close %s", fname);
/* canonicalize emply messages */
if (*messagep != NULL &&
(**messagep == '\0' || strcmp (*messagep, "\n") == 0))
{
free (*messagep);
*messagep = NULL;
}
if (pre_stbuf.st_mtime == post_stbuf.st_mtime || *messagep == NULL)
{
for (;;)
{
(void) printf ("\nLog message unchanged or not specified\n");
(void) printf ("a)bort, c)ontinue, e)dit, !)reuse this message unchanged for remaining dirs\n");
(void) printf ("Action: (continue) ");
(void) fflush (stdout);
line_length = getline (&line, &line_chars_allocated, stdin);
if (line_length < 0)
{
error (0, errno, "cannot read from stdin");
if (unlink_file (fname) < 0)
error (0, errno,
"warning: cannot remove temp file %s", fname);
error (1, 0, "aborting");
}
else if (line_length == 0
|| *line == '\n' || *line == 'c' || *line == 'C')
break;
if (*line == 'a' || *line == 'A')
{
if (unlink_file (fname) < 0)
error (0, errno, "warning: cannot remove temp file %s", fname);
error (1, 0, "aborted by user");
}
if (*line == 'e' || *line == 'E')
goto again;
if (*line == '!')
{
reuse_log_message = 1;
break;
}
(void) printf ("Unknown input\n");
}
}
if (line)
free (line);
if (unlink_file (fname) < 0)
error (0, errno, "warning: cannot remove temp file %s", fname);
free (fname);
}
/* Runs the user-defined verification script as part of the commit or import
process. This verification is meant to be run whether or not the user
included the -m atribute. unlike the do_editor function, this is
independant of the running of an editor for getting a message.
*/
void
do_verify (messagep, repository)
char **messagep;
const char *repository;
{
FILE *fp;
char *fname;
int retcode = 0;
struct stat pre_stbuf, post_stbuf;
if (current_parsed_root->isremote)
/* The verification will happen on the server. */
return;
/* FIXME? Do we really want to skip this on noexec? What do we do
for the other administrative files? */
if (noexec || repository == NULL)
return;
/* Get the name of the verification script to run */
if (Parse_Info (CVSROOTADM_VERIFYMSG, repository, verifymsg_proc, 0) > 0)
error (1, 0, "Message verification failed");
if (!verifymsg_script)
return;
/* open a temporary file, write the message to the
temp file, and close the file. */
if ((fp = cvs_temp_file (&fname)) == NULL)
error (1, errno, "cannot create temporary file %s",
fname ? fname : "(null)");
if (*messagep != NULL)
fputs (*messagep, fp);
if (*messagep == NULL ||
(*messagep)[0] == '\0' ||
(*messagep)[strlen (*messagep) - 1] != '\n')
putc ('\n', fp);
if (fclose (fp) == EOF)
error (1, errno, "%s", fname);
if (RereadLogAfterVerify == LOGMSG_REREAD_STAT)
{
/* Remember the status of the temp file for later */
if ( CVS_STAT (fname, &pre_stbuf) != 0 )
error (1, errno, "cannot stat temp file %s", fname);
/*
* See if we need to sleep before running the verification
* script to avoid time-stamp races.
*/
sleep_past (pre_stbuf.st_mtime);
}
run_setup (verifymsg_script);
run_arg (fname);
if ((retcode = run_exec (RUN_TTY, RUN_TTY, RUN_TTY,
RUN_NORMAL | RUN_SIGIGNORE)) != 0)
{
/* Since following error() exits, delete the temp file now. */
if (unlink_file (fname) < 0)
error (0, errno, "cannot remove %s", fname);
error (1, retcode == -1 ? errno : 0,
"Message verification failed");
}
/* Get the mod time and size of the possibly new log message
* in always and stat modes.
*/
if (RereadLogAfterVerify == LOGMSG_REREAD_ALWAYS ||
RereadLogAfterVerify == LOGMSG_REREAD_STAT)
{
if ( CVS_STAT (fname, &post_stbuf) != 0 )
error (1, errno, "cannot find size of temp file %s", fname);
}
/* And reread the log message in `always' mode or in `stat' mode when it's
* changed
*/
if (RereadLogAfterVerify == LOGMSG_REREAD_ALWAYS ||
(RereadLogAfterVerify == LOGMSG_REREAD_STAT &&
(pre_stbuf.st_mtime != post_stbuf.st_mtime ||
pre_stbuf.st_size != post_stbuf.st_size)))
{
/* put the entire message back into the *messagep variable */
if (*messagep) free (*messagep);
if (post_stbuf.st_size == 0)
*messagep = NULL;
else
{
char *line = NULL;
int line_length;
size_t line_chars_allocated = 0;
char *p;
if ( (fp = open_file (fname, "r")) == NULL )
error (1, errno, "cannot open temporary file %s", fname);
/* On NT, we might read less than st_size bytes,
but we won't read more. So this works. */
p = *messagep = (char *) xmalloc (post_stbuf.st_size + 1);
*messagep[0] = '\0';
while (1)
{
line_length = getline (&line,
&line_chars_allocated,
fp);
if (line_length == -1)
{
if (ferror (fp))
/* Fail in this case because otherwise we will have no
* log message
*/
error (1, errno, "cannot read %s", fname);
break;
}
if (strncmp (line, CVSEDITPREFIX, CVSEDITPREFIXLEN) == 0)
continue;
(void) strcpy (p, line);
p += line_length;
}
if (line) free (line);
if (fclose (fp) < 0)
error (0, errno, "warning: cannot close %s", fname);
}
}
/* Delete the temp file */
if (unlink_file (fname) < 0)
error (0, errno, "cannot remove %s", fname);
free (fname);
free (verifymsg_script);
verifymsg_script = NULL;
}
/*
* callback proc for Parse_Info for rcsinfo templates this routine basically
* copies the matching template onto the end of the tempfile we are setting
* up
*/
/* ARGSUSED */
static int
rcsinfo_proc (repository, template)
const char *repository;
const char *template;
{
static char *last_template;
FILE *tfp;
/* nothing to do if the last one included is the same as this one */
if (last_template && strcmp (last_template, template) == 0)
return (0);
if (last_template)
free (last_template);
last_template = xstrdup (template);
if ((tfp = CVS_FOPEN (template, "r")) != NULL)
{
char *line = NULL;
size_t line_chars_allocated = 0;
while (getline (&line, &line_chars_allocated, tfp) >= 0)
(void) fputs (line, fp);
if (ferror (tfp))
error (0, errno, "warning: cannot read %s", template);
if (fclose (tfp) < 0)
error (0, errno, "warning: cannot close %s", template);
if (line)
free (line);
return (0);
}
else
{
error (0, errno, "Couldn't open rcsinfo template file %s", template);
return (1);
}
}
/*
* Uses setup_tmpfile() to pass the updated message on directly to any
* logfile programs that have a regular expression match for the checked in
* directory in the source repository. The log information is fed into the
* specified program as standard input.
*/
static FILE *logfp;
static const char *message;
static List *changes;
void
Update_Logfile (repository, xmessage, xlogfp, xchanges)
const char *repository;
const char *xmessage;
FILE *xlogfp;
List *xchanges;
{
/* nothing to do if the list is empty */
if (xchanges == NULL || xchanges->list->next == xchanges->list)
return;
/* set up static vars for update_logfile_proc */
message = xmessage;
logfp = xlogfp;
changes = xchanges;
/* call Parse_Info to do the actual logfile updates */
(void) Parse_Info (CVSROOTADM_LOGINFO, repository, update_logfile_proc, 1);
}
/*
* callback proc to actually do the logfile write from Update_Logfile
*/
static int
update_logfile_proc (repository, filter)
const char *repository;
const char *filter;
{
return logfile_write (repository, filter, message, logfp, changes);
}
/*
* concatenate each filename/version onto str_list
*/
static int
title_proc (p, closure)
Node *p;
void *closure;
{
char *c;
struct logfile_info *li = p->data;
if (li->type == type)
{
/* Until we decide on the correct logging solution when we add
directories or perform imports, T_TITLE nodes will only
tack on the name provided, regardless of the format string.
You can verify that this assumption is safe by checking the
code in add.c (add_directory) and import.c (import). */
str_list = xrealloc (str_list, strlen (str_list) + 5);
(void) strcat (str_list, " ");
if (li->type == T_TITLE)
{
str_list = xrealloc (str_list,
strlen (str_list) + strlen (p->key) + 5);
(void) strcat (str_list, p->key);
}
else
{
/* All other nodes use the format string. */
for (c = str_list_format; *c != '\0'; c++)
{
switch (*c)
{
case 's':
str_list =
xrealloc (str_list,
strlen (str_list) + strlen (p->key) + 5);
(void) strcat (str_list, p->key);
break;
case 'V':
str_list =
xrealloc (str_list,
(strlen (str_list)
+ (li->rev_old ? strlen (li->rev_old) : 0)
+ 10)
);
(void) strcat (str_list, (li->rev_old
? li->rev_old : "NONE"));
break;
case 'v':
str_list =
xrealloc (str_list,
(strlen (str_list)
+ (li->rev_new ? strlen (li->rev_new) : 0)
+ 10)
);
(void) strcat (str_list, (li->rev_new
? li->rev_new : "NONE"));
break;
/* All other characters, we insert an empty field (but
we do put in the comma separating it from other
fields). This way if future CVS versions add formatting
characters, one can write a loginfo file which at least
won't blow up on an old CVS. */
/* Note that people who have to deal with spaces in file
and directory names are using space to get a known
delimiter for the directory name, so it's probably
not a good idea to ever define that as a formatting
character. */
}
if (*(c + 1) != '\0')
{
str_list = xrealloc (str_list, strlen (str_list) + 5);
(void) strcat (str_list, ",");
}
}
}
}
return (0);
}
/*
* Writes some stuff to the logfile "filter" and returns the status of the
* filter program.
*/
static int
logfile_write (repository, filter, message, logfp, changes)
const char *repository;
const char *filter;
const char *message;
FILE *logfp;
List *changes;
{
FILE *pipefp;
char *prog;
char *cp;
int c;
int pipestatus;
char *fmt_percent; /* the location of the percent sign
that starts the format string. */
assert (repository);
/* The user may specify a format string as part of the filter.
Originally, `%s' was the only valid string. The string that
was substituted for it was:
<repository-name> <file1> <file2> <file3> ...
Each file was either a new directory/import (T_TITLE), or a
added (T_ADDED), modified (T_MODIFIED), or removed (T_REMOVED)
file.
It is desirable to preserve that behavior so lots of commitlog
scripts won't die when they get this new code. At the same
time, we'd like to pass other information about the files (like
version numbers, statuses, or checkin times).
The solution is to allow a format string that allows us to
specify those other pieces of information. The format string
will be composed of `%' followed by a single format character,
or followed by a set of format characters surrounded by `{' and
`}' as separators. The format characters are:
s = file name
V = old version number (pre-checkin)
v = new version number (post-checkin)
For example, valid format strings are:
%{}
%s
%{s}
%{sVv}
There's no reason that more items couldn't be added (like
modification date or file status [added, modified, updated,
etc.]) -- the code modifications would be minimal (logmsg.c
(title_proc) and commit.c (check_fileproc)).
The output will be a string of tokens separated by spaces. For
backwards compatibility, the the first token will be the
repository name. The rest of the tokens will be
comma-delimited lists of the information requested in the
format string. For example, if `/u/src/master' is the
repository, `%{sVv}' is the format string, and three files
(ChangeLog, Makefile, foo.c) were modified, the output might
be:
/u/src/master ChangeLog,1.1,1.2 Makefile,1.3,1.4 foo.c,1.12,1.13
Why this duplicates the old behavior when the format string is
`%s' is left as an exercise for the reader. */
fmt_percent = strchr (filter, '%');
if (fmt_percent)
{
int len;
const char *srepos;
char *fmt_begin, *fmt_end; /* beginning and end of the
format string specified in
filter. */
char *fmt_continue; /* where the string continues
after the format string (we
might skip a '}') somewhere
in there... */
/* Grab the format string. */
if ((*(fmt_percent + 1) == ' ') || (*(fmt_percent + 1) == '\0'))
{
/* The percent stands alone. This is an error. We could
be treating ' ' like any other formatting character, but
using it as a formatting character seems like it would be
a mistake. */
/* Would be nice to also be giving the line number. */
error (0, 0, "loginfo: '%%' not followed by formatting character");
fmt_begin = fmt_percent + 1;
fmt_end = fmt_begin;
fmt_continue = fmt_begin;
}
else if (*(fmt_percent + 1) == '{')
{
/* The percent has a set of characters following it. */
fmt_begin = fmt_percent + 2;
fmt_end = strchr (fmt_begin, '}');
if (fmt_end)
{
/* Skip over the '}' character. */
fmt_continue = fmt_end + 1;
}
else
{
/* There was no close brace -- assume that format
string continues to the end of the line. */
/* Would be nice to also be giving the line number. */
error (0, 0, "loginfo: '}' missing");
fmt_end = fmt_begin + strlen (fmt_begin);
fmt_continue = fmt_end;
}
}
else
{
/* The percent has a single character following it. FIXME:
%% should expand to a regular percent sign. */
fmt_begin = fmt_percent + 1;
fmt_end = fmt_begin + 1;
fmt_continue = fmt_end;
}
len = fmt_end - fmt_begin;
str_list_format = xmalloc (len + 1);
strncpy (str_list_format, fmt_begin, len);
str_list_format[len] = '\0';
/* Allocate an initial chunk of memory. As we build up the string
we will realloc it. */
if (!str_list)
str_list = xmalloc (1);
str_list[0] = '\0';
/* Add entries to the string. Don't bother looking for
entries if the format string is empty. */
if (str_list_format[0] != '\0')
{
type = T_TITLE;
(void) walklist (changes, title_proc, NULL);
type = T_ADDED;
(void) walklist (changes, title_proc, NULL);
type = T_MODIFIED;
(void) walklist (changes, title_proc, NULL);
type = T_REMOVED;
(void) walklist (changes, title_proc, NULL);
}
free (str_list_format);
/* Construct the final string. */
srepos = Short_Repository (repository);
prog = cp = xmalloc ((fmt_percent - filter) + 2 * strlen (srepos)
+ 2 * strlen (str_list) + strlen (fmt_continue)
+ 10);
(void) memcpy (cp, filter, fmt_percent - filter);
cp += fmt_percent - filter;
*cp++ = '"';
cp = shell_escape (cp, srepos);
cp = shell_escape (cp, str_list);
*cp++ = '"';
(void) strcpy (cp, fmt_continue);
/* To be nice, free up some memory. */
free (str_list);
str_list = (char *) NULL;
}
else
{
/* There's no format string. */
prog = xstrdup (filter);
}
if ((pipefp = run_popen (prog, "w")) == NULL)
{
if (!noexec)
error (0, 0, "cannot write entry to log filter: %s", prog);
free (prog);
return (1);
}
(void) fprintf (pipefp, "Update of %s\n", repository);
(void) fprintf (pipefp, "In directory %s:", hostname);
cp = xgetwd ();
if (cp == NULL)
fprintf (pipefp, "<cannot get working directory: %s>\n\n",
strerror (errno));
else
{
fprintf (pipefp, "%s\n\n", cp);
free (cp);
}
setup_tmpfile (pipefp, "", changes);
(void) fprintf (pipefp, "Log Message:\n%s\n", (message) ? message : "");
if (logfp != (FILE *) 0)
{
(void) fprintf (pipefp, "Status:\n");
rewind (logfp);
while ((c = getc (logfp)) != EOF)
(void) putc ((char) c, pipefp);
}
free (prog);
pipestatus = pclose (pipefp);
return ((pipestatus == -1) || (pipestatus == 127)) ? 1 : 0;
}
/*
* We choose to use the *last* match within the editinfo file for this
* repository. This allows us to have a global editinfo program for the
* root of some hierarchy, for example, and different ones within different
* sub-directories of the root (like a special checker for changes made to
* the "src" directory versus changes made to the "doc" or "test"
* directories.
*/
/* ARGSUSED */
static int
editinfo_proc(repository, editor)
const char *repository;
const char *editor;
{
/* nothing to do if the last match is the same as this one */
if (editinfo_editor && strcmp (editinfo_editor, editor) == 0)
return (0);
if (editinfo_editor)
free (editinfo_editor);
editinfo_editor = xstrdup (editor);
return (0);
}
/* This routine is calld by Parse_Info. it asigns the name of the
* message verification script to the global variable verify_script
*/
static int
verifymsg_proc (repository, script)
const char *repository;
const char *script;
{
if (verifymsg_script && strcmp (verifymsg_script, script) == 0)
return (0);
if (verifymsg_script)
free (verifymsg_script);
verifymsg_script = xstrdup (script);
return (0);
}