config root man

Current Path : /usr/src/contrib/libarchive/libarchive/

FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64
Upload File :
Current File : //usr/src/contrib/libarchive/libarchive/archive_write_set_format_ar.c

/*-
 * Copyright (c) 2007 Kai Wang
 * Copyright (c) 2007 Tim Kientzle
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer
 *    in this position and unchanged.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "archive_platform.h"
__FBSDID("$FreeBSD: release/9.1.0/contrib/libarchive/libarchive/archive_write_set_format_ar.c 229592 2012-01-05 12:06:54Z mm $");

#ifdef HAVE_ERRNO_H
#include <errno.h>
#endif
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_STRING_H
#include <string.h>
#endif

#include "archive.h"
#include "archive_entry.h"
#include "archive_private.h"
#include "archive_write_private.h"

struct ar_w {
	uint64_t	 entry_bytes_remaining;
	uint64_t	 entry_padding;
	int		 is_strtab;
	int		 has_strtab;
	char		*strtab;
};

/*
 * Define structure of the "ar" header.
 */
#define AR_name_offset 0
#define AR_name_size 16
#define AR_date_offset 16
#define AR_date_size 12
#define AR_uid_offset 28
#define AR_uid_size 6
#define AR_gid_offset 34
#define AR_gid_size 6
#define AR_mode_offset 40
#define AR_mode_size 8
#define AR_size_offset 48
#define AR_size_size 10
#define AR_fmag_offset 58
#define AR_fmag_size 2

static int		 archive_write_set_format_ar(struct archive_write *);
static int		 archive_write_ar_header(struct archive_write *,
			     struct archive_entry *);
static ssize_t		 archive_write_ar_data(struct archive_write *,
			     const void *buff, size_t s);
static int		 archive_write_ar_destroy(struct archive_write *);
static int		 archive_write_ar_finish(struct archive_write *);
static int		 archive_write_ar_finish_entry(struct archive_write *);
static const char	*ar_basename(const char *path);
static int		 format_octal(int64_t v, char *p, int s);
static int		 format_decimal(int64_t v, char *p, int s);

int
archive_write_set_format_ar_bsd(struct archive *_a)
{
	struct archive_write *a = (struct archive_write *)_a;
	int r = archive_write_set_format_ar(a);
	if (r == ARCHIVE_OK) {
		a->archive.archive_format = ARCHIVE_FORMAT_AR_BSD;
		a->archive.archive_format_name = "ar (BSD)";
	}
	return (r);
}

int
archive_write_set_format_ar_svr4(struct archive *_a)
{
	struct archive_write *a = (struct archive_write *)_a;
	int r = archive_write_set_format_ar(a);
	if (r == ARCHIVE_OK) {
		a->archive.archive_format = ARCHIVE_FORMAT_AR_GNU;
		a->archive.archive_format_name = "ar (GNU/SVR4)";
	}
	return (r);
}

/*
 * Generic initialization.
 */
static int
archive_write_set_format_ar(struct archive_write *a)
{
	struct ar_w *ar;

	/* If someone else was already registered, unregister them. */
	if (a->format_destroy != NULL)
		(a->format_destroy)(a);

	ar = (struct ar_w *)malloc(sizeof(*ar));
	if (ar == NULL) {
		archive_set_error(&a->archive, ENOMEM, "Can't allocate ar data");
		return (ARCHIVE_FATAL);
	}
	memset(ar, 0, sizeof(*ar));
	a->format_data = ar;

	a->format_name = "ar";
	a->format_write_header = archive_write_ar_header;
	a->format_write_data = archive_write_ar_data;
	a->format_finish = archive_write_ar_finish;
	a->format_destroy = archive_write_ar_destroy;
	a->format_finish_entry = archive_write_ar_finish_entry;
	return (ARCHIVE_OK);
}

static int
archive_write_ar_header(struct archive_write *a, struct archive_entry *entry)
{
	int ret, append_fn;
	char buff[60];
	char *ss, *se;
	struct ar_w *ar;
	const char *pathname;
	const char *filename;
	int64_t size;

	append_fn = 0;
	ar = (struct ar_w *)a->format_data;
	ar->is_strtab = 0;
	filename = NULL;
	size = archive_entry_size(entry);


	/*
	 * Reject files with empty name.
	 */
	pathname = archive_entry_pathname(entry);
	if (*pathname == '\0') {
		archive_set_error(&a->archive, EINVAL,
		    "Invalid filename");
		return (ARCHIVE_WARN);
	}

	/*
	 * If we are now at the beginning of the archive,
	 * we need first write the ar global header.
	 */
	if (a->archive.file_position == 0)
		(a->compressor.write)(a, "!<arch>\n", 8);

	memset(buff, ' ', 60);
	strncpy(&buff[AR_fmag_offset], "`\n", 2);

	if (strcmp(pathname, "/") == 0 ) {
		/* Entry is archive symbol table in GNU format */
		buff[AR_name_offset] = '/';
		goto stat;
	}
	if (strcmp(pathname, "__.SYMDEF") == 0) {
		/* Entry is archive symbol table in BSD format */
		strncpy(buff + AR_name_offset, "__.SYMDEF", 9);
		goto stat;
	}
	if (strcmp(pathname, "//") == 0) {
		/*
		 * Entry is archive filename table, inform that we should
		 * collect strtab in next _data call.
		 */
		ar->is_strtab = 1;
		buff[AR_name_offset] = buff[AR_name_offset + 1] = '/';
		/*
		 * For archive string table, only ar_size filed should
		 * be set.
		 */
		goto size;
	}

	/*
	 * Otherwise, entry is a normal archive member.
	 * Strip leading paths from filenames, if any.
	 */
	if ((filename = ar_basename(pathname)) == NULL) {
		/* Reject filenames with trailing "/" */
		archive_set_error(&a->archive, EINVAL,
		    "Invalid filename");
		return (ARCHIVE_WARN);
	}

	if (a->archive.archive_format == ARCHIVE_FORMAT_AR_GNU) {
		/*
		 * SVR4/GNU variant use a "/" to mark then end of the filename,
		 * make it possible to have embedded spaces in the filename.
		 * So, the longest filename here (without extension) is
		 * actually 15 bytes.
		 */
		if (strlen(filename) <= 15) {
			strncpy(&buff[AR_name_offset], 
			    filename, strlen(filename));
			buff[AR_name_offset + strlen(filename)] = '/';
		} else {
			/*
			 * For filename longer than 15 bytes, GNU variant
			 * makes use of a string table and instead stores the
			 * offset of the real filename to in the ar_name field.
			 * The string table should have been written before.
			 */
			if (ar->has_strtab <= 0) {
				archive_set_error(&a->archive, EINVAL,
				    "Can't find string table");
				return (ARCHIVE_WARN);
			}

			se = (char *)malloc(strlen(filename) + 3);
			if (se == NULL) {
				archive_set_error(&a->archive, ENOMEM,
				    "Can't allocate filename buffer");
				return (ARCHIVE_FATAL);
			}

			strncpy(se, filename, strlen(filename));
			strcpy(se + strlen(filename), "/\n");

			ss = strstr(ar->strtab, se);
			free(se);

			if (ss == NULL) {
				archive_set_error(&a->archive, EINVAL,
				    "Invalid string table");
				return (ARCHIVE_WARN);
			}

			/*
			 * GNU variant puts "/" followed by digits into
			 * ar_name field. These digits indicates the real
			 * filename string's offset to the string table.
			 */
			buff[AR_name_offset] = '/';
			if (format_decimal(ss - ar->strtab,
			    buff + AR_name_offset + 1,
			    AR_name_size - 1)) {
				archive_set_error(&a->archive, ERANGE,
				    "string table offset too large");
				return (ARCHIVE_WARN);
			}
		}
	} else if (a->archive.archive_format == ARCHIVE_FORMAT_AR_BSD) {
		/*
		 * BSD variant: for any file name which is more than
		 * 16 chars or contains one or more embedded space(s), the
		 * string "#1/" followed by the ASCII length of the name is
		 * put into the ar_name field. The file size (stored in the
		 * ar_size field) is incremented by the length of the name.
		 * The name is then written immediately following the
		 * archive header.
		 */
		if (strlen(filename) <= 16 && strchr(filename, ' ') == NULL) {
			strncpy(&buff[AR_name_offset], filename, strlen(filename));
			buff[AR_name_offset + strlen(filename)] = ' ';
		}
		else {
			strncpy(buff + AR_name_offset, "#1/", 3);
			if (format_decimal(strlen(filename),
			    buff + AR_name_offset + 3,
			    AR_name_size - 3)) {
				archive_set_error(&a->archive, ERANGE,
				    "File name too long");
				return (ARCHIVE_WARN);
			}
			append_fn = 1;
			size += strlen(filename);
		}
	}

stat:
	if (format_decimal(archive_entry_mtime(entry), buff + AR_date_offset, AR_date_size)) {
		archive_set_error(&a->archive, ERANGE,
		    "File modification time too large");
		return (ARCHIVE_WARN);
	}
	if (format_decimal(archive_entry_uid(entry), buff + AR_uid_offset, AR_uid_size)) {
		archive_set_error(&a->archive, ERANGE,
		    "Numeric user ID too large");
		return (ARCHIVE_WARN);
	}
	if (format_decimal(archive_entry_gid(entry), buff + AR_gid_offset, AR_gid_size)) {
		archive_set_error(&a->archive, ERANGE,
		    "Numeric group ID too large");
		return (ARCHIVE_WARN);
	}
	if (format_octal(archive_entry_mode(entry), buff + AR_mode_offset, AR_mode_size)) {
		archive_set_error(&a->archive, ERANGE,
		    "Numeric mode too large");
		return (ARCHIVE_WARN);
	}
	/*
	 * Sanity Check: A non-pseudo archive member should always be
	 * a regular file.
	 */
	if (filename != NULL && archive_entry_filetype(entry) != AE_IFREG) {
		archive_set_error(&a->archive, EINVAL,
		    "Regular file required for non-pseudo member");
		return (ARCHIVE_WARN);
	}

size:
	if (format_decimal(size, buff + AR_size_offset, AR_size_size)) {
		archive_set_error(&a->archive, ERANGE,
		    "File size out of range");
		return (ARCHIVE_WARN);
	}

	ret = (a->compressor.write)(a, buff, 60);
	if (ret != ARCHIVE_OK)
		return (ret);

	ar->entry_bytes_remaining = size;
	ar->entry_padding = ar->entry_bytes_remaining % 2;

	if (append_fn > 0) {
		ret = (a->compressor.write)(a, filename, strlen(filename));
		if (ret != ARCHIVE_OK)
			return (ret);
		ar->entry_bytes_remaining -= strlen(filename);
	}

	return (ARCHIVE_OK);
}

static ssize_t
archive_write_ar_data(struct archive_write *a, const void *buff, size_t s)
{
	struct ar_w *ar;
	int ret;

	ar = (struct ar_w *)a->format_data;
	if (s > ar->entry_bytes_remaining)
		s = ar->entry_bytes_remaining;

	if (ar->is_strtab > 0) {
		if (ar->has_strtab > 0) {
			archive_set_error(&a->archive, EINVAL,
			    "More than one string tables exist");
			return (ARCHIVE_WARN);
		}

		ar->strtab = (char *)malloc(s);
		if (ar->strtab == NULL) {
			archive_set_error(&a->archive, ENOMEM,
			    "Can't allocate strtab buffer");
			return (ARCHIVE_FATAL);
		}
		strncpy(ar->strtab, buff, s);
		ar->has_strtab = 1;
	}

	ret = (a->compressor.write)(a, buff, s);
	if (ret != ARCHIVE_OK)
		return (ret);

	ar->entry_bytes_remaining -= s;
	return (s);
}

static int
archive_write_ar_destroy(struct archive_write *a)
{
	struct ar_w *ar;

	ar = (struct ar_w *)a->format_data;

	if (ar == NULL)
		return (ARCHIVE_OK);

	if (ar->has_strtab > 0) {
		free(ar->strtab);
		ar->strtab = NULL;
	}

	free(ar);
	a->format_data = NULL;
	return (ARCHIVE_OK);
}

static int
archive_write_ar_finish(struct archive_write *a)
{
	int ret;

	/*
	 * If we haven't written anything yet, we need to write
	 * the ar global header now to make it a valid ar archive.
	 */
	if (a->archive.file_position == 0) {
		ret = (a->compressor.write)(a, "!<arch>\n", 8);
		return (ret);
	}

	return (ARCHIVE_OK);
}

static int
archive_write_ar_finish_entry(struct archive_write *a)
{
	struct ar_w *ar;
	int ret;

	ar = (struct ar_w *)a->format_data;

	if (ar->entry_bytes_remaining != 0) {
		archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
		    "Entry remaining bytes larger than 0");
		return (ARCHIVE_WARN);
	}

	if (ar->entry_padding == 0) {
		return (ARCHIVE_OK);
	}

	if (ar->entry_padding != 1) {
		archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
		    "Padding wrong size: %d should be 1 or 0",
		    (int)ar->entry_padding);
		return (ARCHIVE_WARN);
	}

	ret = (a->compressor.write)(a, "\n", 1);
	return (ret);
}

/*
 * Format a number into the specified field using base-8.
 * NB: This version is slightly different from the one in
 * _ustar.c
 */
static int
format_octal(int64_t v, char *p, int s)
{
	int len;
	char *h;

	len = s;
	h = p;

	/* Octal values can't be negative, so use 0. */
	if (v < 0) {
		while (len-- > 0)
			*p++ = '0';
		return (-1);
	}

	p += s;		/* Start at the end and work backwards. */
	do {
		*--p = (char)('0' + (v & 7));
		v >>= 3;
	} while (--s > 0 && v > 0);

	if (v == 0) {
		memmove(h, p, len - s);
		p = h + len - s;
		while (s-- > 0)
			*p++ = ' ';
		return (0);
	}
	/* If it overflowed, fill field with max value. */
	while (len-- > 0)
		*p++ = '7';

	return (-1);
}

/*
 * Format a number into the specified field using base-10.
 */
static int
format_decimal(int64_t v, char *p, int s)
{
	int len;
	char *h;

	len = s;
	h = p;

	/* Negative values in ar header are meaningless , so use 0. */
	if (v < 0) {
		while (len-- > 0)
			*p++ = '0';
		return (-1);
	}

	p += s;
	do {
		*--p = (char)('0' + (v % 10));
		v /= 10;
	} while (--s > 0 && v > 0);

	if (v == 0) {
		memmove(h, p, len - s);
		p = h + len - s;
		while (s-- > 0)
			*p++ = ' ';
		return (0);
	}
	/* If it overflowed, fill field with max value. */
	while (len-- > 0)
		*p++ = '9';

	return (-1);
}

static const char *
ar_basename(const char *path)
{
	const char *endp, *startp;

	endp = path + strlen(path) - 1;
	/*
	 * For filename with trailing slash(es), we return
	 * NULL indicating an error.
	 */
	if (*endp == '/')
		return (NULL);

	/* Find the start of the base */
	startp = endp;
	while (startp > path && *(startp - 1) != '/')
		startp--;
	
	return (startp);
}

Man Man