| Current Path : /usr/src/contrib/llvm/lib/Transforms/Utils/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/contrib/llvm/lib/Transforms/Utils/BasicBlockUtils.cpp |
//===-- BasicBlockUtils.cpp - BasicBlock Utilities -------------------------==//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This family of functions perform manipulations on basic blocks, and
// instructions contained within basic blocks.
//
//===----------------------------------------------------------------------===//
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
#include "llvm/Function.h"
#include "llvm/Instructions.h"
#include "llvm/IntrinsicInst.h"
#include "llvm/Constant.h"
#include "llvm/Type.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Analysis/Dominators.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/MemoryDependenceAnalysis.h"
#include "llvm/Target/TargetData.h"
#include "llvm/Transforms/Utils/Local.h"
#include "llvm/Transforms/Scalar.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/ValueHandle.h"
#include <algorithm>
using namespace llvm;
/// DeleteDeadBlock - Delete the specified block, which must have no
/// predecessors.
void llvm::DeleteDeadBlock(BasicBlock *BB) {
assert((pred_begin(BB) == pred_end(BB) ||
// Can delete self loop.
BB->getSinglePredecessor() == BB) && "Block is not dead!");
TerminatorInst *BBTerm = BB->getTerminator();
// Loop through all of our successors and make sure they know that one
// of their predecessors is going away.
for (unsigned i = 0, e = BBTerm->getNumSuccessors(); i != e; ++i)
BBTerm->getSuccessor(i)->removePredecessor(BB);
// Zap all the instructions in the block.
while (!BB->empty()) {
Instruction &I = BB->back();
// If this instruction is used, replace uses with an arbitrary value.
// Because control flow can't get here, we don't care what we replace the
// value with. Note that since this block is unreachable, and all values
// contained within it must dominate their uses, that all uses will
// eventually be removed (they are themselves dead).
if (!I.use_empty())
I.replaceAllUsesWith(UndefValue::get(I.getType()));
BB->getInstList().pop_back();
}
// Zap the block!
BB->eraseFromParent();
}
/// FoldSingleEntryPHINodes - We know that BB has one predecessor. If there are
/// any single-entry PHI nodes in it, fold them away. This handles the case
/// when all entries to the PHI nodes in a block are guaranteed equal, such as
/// when the block has exactly one predecessor.
void llvm::FoldSingleEntryPHINodes(BasicBlock *BB, Pass *P) {
if (!isa<PHINode>(BB->begin())) return;
AliasAnalysis *AA = 0;
MemoryDependenceAnalysis *MemDep = 0;
if (P) {
AA = P->getAnalysisIfAvailable<AliasAnalysis>();
MemDep = P->getAnalysisIfAvailable<MemoryDependenceAnalysis>();
}
while (PHINode *PN = dyn_cast<PHINode>(BB->begin())) {
if (PN->getIncomingValue(0) != PN)
PN->replaceAllUsesWith(PN->getIncomingValue(0));
else
PN->replaceAllUsesWith(UndefValue::get(PN->getType()));
if (MemDep)
MemDep->removeInstruction(PN); // Memdep updates AA itself.
else if (AA && isa<PointerType>(PN->getType()))
AA->deleteValue(PN);
PN->eraseFromParent();
}
}
/// DeleteDeadPHIs - Examine each PHI in the given block and delete it if it
/// is dead. Also recursively delete any operands that become dead as
/// a result. This includes tracing the def-use list from the PHI to see if
/// it is ultimately unused or if it reaches an unused cycle.
bool llvm::DeleteDeadPHIs(BasicBlock *BB) {
// Recursively deleting a PHI may cause multiple PHIs to be deleted
// or RAUW'd undef, so use an array of WeakVH for the PHIs to delete.
SmallVector<WeakVH, 8> PHIs;
for (BasicBlock::iterator I = BB->begin();
PHINode *PN = dyn_cast<PHINode>(I); ++I)
PHIs.push_back(PN);
bool Changed = false;
for (unsigned i = 0, e = PHIs.size(); i != e; ++i)
if (PHINode *PN = dyn_cast_or_null<PHINode>(PHIs[i].operator Value*()))
Changed |= RecursivelyDeleteDeadPHINode(PN);
return Changed;
}
/// MergeBlockIntoPredecessor - Attempts to merge a block into its predecessor,
/// if possible. The return value indicates success or failure.
bool llvm::MergeBlockIntoPredecessor(BasicBlock *BB, Pass *P) {
// Don't merge away blocks who have their address taken.
if (BB->hasAddressTaken()) return false;
// Can't merge if there are multiple predecessors, or no predecessors.
BasicBlock *PredBB = BB->getUniquePredecessor();
if (!PredBB) return false;
// Don't break self-loops.
if (PredBB == BB) return false;
// Don't break invokes.
if (isa<InvokeInst>(PredBB->getTerminator())) return false;
succ_iterator SI(succ_begin(PredBB)), SE(succ_end(PredBB));
BasicBlock *OnlySucc = BB;
for (; SI != SE; ++SI)
if (*SI != OnlySucc) {
OnlySucc = 0; // There are multiple distinct successors!
break;
}
// Can't merge if there are multiple successors.
if (!OnlySucc) return false;
// Can't merge if there is PHI loop.
for (BasicBlock::iterator BI = BB->begin(), BE = BB->end(); BI != BE; ++BI) {
if (PHINode *PN = dyn_cast<PHINode>(BI)) {
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
if (PN->getIncomingValue(i) == PN)
return false;
} else
break;
}
// Begin by getting rid of unneeded PHIs.
if (isa<PHINode>(BB->front()))
FoldSingleEntryPHINodes(BB, P);
// Delete the unconditional branch from the predecessor...
PredBB->getInstList().pop_back();
// Make all PHI nodes that referred to BB now refer to Pred as their
// source...
BB->replaceAllUsesWith(PredBB);
// Move all definitions in the successor to the predecessor...
PredBB->getInstList().splice(PredBB->end(), BB->getInstList());
// Inherit predecessors name if it exists.
if (!PredBB->hasName())
PredBB->takeName(BB);
// Finally, erase the old block and update dominator info.
if (P) {
if (DominatorTree *DT = P->getAnalysisIfAvailable<DominatorTree>()) {
if (DomTreeNode *DTN = DT->getNode(BB)) {
DomTreeNode *PredDTN = DT->getNode(PredBB);
SmallVector<DomTreeNode*, 8> Children(DTN->begin(), DTN->end());
for (SmallVector<DomTreeNode*, 8>::iterator DI = Children.begin(),
DE = Children.end(); DI != DE; ++DI)
DT->changeImmediateDominator(*DI, PredDTN);
DT->eraseNode(BB);
}
if (LoopInfo *LI = P->getAnalysisIfAvailable<LoopInfo>())
LI->removeBlock(BB);
if (MemoryDependenceAnalysis *MD =
P->getAnalysisIfAvailable<MemoryDependenceAnalysis>())
MD->invalidateCachedPredecessors();
}
}
BB->eraseFromParent();
return true;
}
/// ReplaceInstWithValue - Replace all uses of an instruction (specified by BI)
/// with a value, then remove and delete the original instruction.
///
void llvm::ReplaceInstWithValue(BasicBlock::InstListType &BIL,
BasicBlock::iterator &BI, Value *V) {
Instruction &I = *BI;
// Replaces all of the uses of the instruction with uses of the value
I.replaceAllUsesWith(V);
// Make sure to propagate a name if there is one already.
if (I.hasName() && !V->hasName())
V->takeName(&I);
// Delete the unnecessary instruction now...
BI = BIL.erase(BI);
}
/// ReplaceInstWithInst - Replace the instruction specified by BI with the
/// instruction specified by I. The original instruction is deleted and BI is
/// updated to point to the new instruction.
///
void llvm::ReplaceInstWithInst(BasicBlock::InstListType &BIL,
BasicBlock::iterator &BI, Instruction *I) {
assert(I->getParent() == 0 &&
"ReplaceInstWithInst: Instruction already inserted into basic block!");
// Insert the new instruction into the basic block...
BasicBlock::iterator New = BIL.insert(BI, I);
// Replace all uses of the old instruction, and delete it.
ReplaceInstWithValue(BIL, BI, I);
// Move BI back to point to the newly inserted instruction
BI = New;
}
/// ReplaceInstWithInst - Replace the instruction specified by From with the
/// instruction specified by To.
///
void llvm::ReplaceInstWithInst(Instruction *From, Instruction *To) {
BasicBlock::iterator BI(From);
ReplaceInstWithInst(From->getParent()->getInstList(), BI, To);
}
/// GetSuccessorNumber - Search for the specified successor of basic block BB
/// and return its position in the terminator instruction's list of
/// successors. It is an error to call this with a block that is not a
/// successor.
unsigned llvm::GetSuccessorNumber(BasicBlock *BB, BasicBlock *Succ) {
TerminatorInst *Term = BB->getTerminator();
#ifndef NDEBUG
unsigned e = Term->getNumSuccessors();
#endif
for (unsigned i = 0; ; ++i) {
assert(i != e && "Didn't find edge?");
if (Term->getSuccessor(i) == Succ)
return i;
}
}
/// SplitEdge - Split the edge connecting specified block. Pass P must
/// not be NULL.
BasicBlock *llvm::SplitEdge(BasicBlock *BB, BasicBlock *Succ, Pass *P) {
unsigned SuccNum = GetSuccessorNumber(BB, Succ);
// If this is a critical edge, let SplitCriticalEdge do it.
TerminatorInst *LatchTerm = BB->getTerminator();
if (SplitCriticalEdge(LatchTerm, SuccNum, P))
return LatchTerm->getSuccessor(SuccNum);
// If the edge isn't critical, then BB has a single successor or Succ has a
// single pred. Split the block.
BasicBlock::iterator SplitPoint;
if (BasicBlock *SP = Succ->getSinglePredecessor()) {
// If the successor only has a single pred, split the top of the successor
// block.
assert(SP == BB && "CFG broken");
SP = NULL;
return SplitBlock(Succ, Succ->begin(), P);
}
// Otherwise, if BB has a single successor, split it at the bottom of the
// block.
assert(BB->getTerminator()->getNumSuccessors() == 1 &&
"Should have a single succ!");
return SplitBlock(BB, BB->getTerminator(), P);
}
/// SplitBlock - Split the specified block at the specified instruction - every
/// thing before SplitPt stays in Old and everything starting with SplitPt moves
/// to a new block. The two blocks are joined by an unconditional branch and
/// the loop info is updated.
///
BasicBlock *llvm::SplitBlock(BasicBlock *Old, Instruction *SplitPt, Pass *P) {
BasicBlock::iterator SplitIt = SplitPt;
while (isa<PHINode>(SplitIt) || isa<LandingPadInst>(SplitIt))
++SplitIt;
BasicBlock *New = Old->splitBasicBlock(SplitIt, Old->getName()+".split");
// The new block lives in whichever loop the old one did. This preserves
// LCSSA as well, because we force the split point to be after any PHI nodes.
if (LoopInfo *LI = P->getAnalysisIfAvailable<LoopInfo>())
if (Loop *L = LI->getLoopFor(Old))
L->addBasicBlockToLoop(New, LI->getBase());
if (DominatorTree *DT = P->getAnalysisIfAvailable<DominatorTree>()) {
// Old dominates New. New node dominates all other nodes dominated by Old.
if (DomTreeNode *OldNode = DT->getNode(Old)) {
std::vector<DomTreeNode *> Children;
for (DomTreeNode::iterator I = OldNode->begin(), E = OldNode->end();
I != E; ++I)
Children.push_back(*I);
DomTreeNode *NewNode = DT->addNewBlock(New,Old);
for (std::vector<DomTreeNode *>::iterator I = Children.begin(),
E = Children.end(); I != E; ++I)
DT->changeImmediateDominator(*I, NewNode);
}
}
return New;
}
/// UpdateAnalysisInformation - Update DominatorTree, LoopInfo, and LCCSA
/// analysis information.
static void UpdateAnalysisInformation(BasicBlock *OldBB, BasicBlock *NewBB,
ArrayRef<BasicBlock *> Preds,
Pass *P, bool &HasLoopExit) {
if (!P) return;
LoopInfo *LI = P->getAnalysisIfAvailable<LoopInfo>();
Loop *L = LI ? LI->getLoopFor(OldBB) : 0;
// If we need to preserve loop analyses, collect some information about how
// this split will affect loops.
bool IsLoopEntry = !!L;
bool SplitMakesNewLoopHeader = false;
if (LI) {
bool PreserveLCSSA = P->mustPreserveAnalysisID(LCSSAID);
for (ArrayRef<BasicBlock*>::iterator
i = Preds.begin(), e = Preds.end(); i != e; ++i) {
BasicBlock *Pred = *i;
// If we need to preserve LCSSA, determine if any of the preds is a loop
// exit.
if (PreserveLCSSA)
if (Loop *PL = LI->getLoopFor(Pred))
if (!PL->contains(OldBB))
HasLoopExit = true;
// If we need to preserve LoopInfo, note whether any of the preds crosses
// an interesting loop boundary.
if (!L) continue;
if (L->contains(Pred))
IsLoopEntry = false;
else
SplitMakesNewLoopHeader = true;
}
}
// Update dominator tree if available.
DominatorTree *DT = P->getAnalysisIfAvailable<DominatorTree>();
if (DT)
DT->splitBlock(NewBB);
if (!L) return;
if (IsLoopEntry) {
// Add the new block to the nearest enclosing loop (and not an adjacent
// loop). To find this, examine each of the predecessors and determine which
// loops enclose them, and select the most-nested loop which contains the
// loop containing the block being split.
Loop *InnermostPredLoop = 0;
for (ArrayRef<BasicBlock*>::iterator
i = Preds.begin(), e = Preds.end(); i != e; ++i) {
BasicBlock *Pred = *i;
if (Loop *PredLoop = LI->getLoopFor(Pred)) {
// Seek a loop which actually contains the block being split (to avoid
// adjacent loops).
while (PredLoop && !PredLoop->contains(OldBB))
PredLoop = PredLoop->getParentLoop();
// Select the most-nested of these loops which contains the block.
if (PredLoop && PredLoop->contains(OldBB) &&
(!InnermostPredLoop ||
InnermostPredLoop->getLoopDepth() < PredLoop->getLoopDepth()))
InnermostPredLoop = PredLoop;
}
}
if (InnermostPredLoop)
InnermostPredLoop->addBasicBlockToLoop(NewBB, LI->getBase());
} else {
L->addBasicBlockToLoop(NewBB, LI->getBase());
if (SplitMakesNewLoopHeader)
L->moveToHeader(NewBB);
}
}
/// UpdatePHINodes - Update the PHI nodes in OrigBB to include the values coming
/// from NewBB. This also updates AliasAnalysis, if available.
static void UpdatePHINodes(BasicBlock *OrigBB, BasicBlock *NewBB,
ArrayRef<BasicBlock*> Preds, BranchInst *BI,
Pass *P, bool HasLoopExit) {
// Otherwise, create a new PHI node in NewBB for each PHI node in OrigBB.
AliasAnalysis *AA = P ? P->getAnalysisIfAvailable<AliasAnalysis>() : 0;
for (BasicBlock::iterator I = OrigBB->begin(); isa<PHINode>(I); ) {
PHINode *PN = cast<PHINode>(I++);
// Check to see if all of the values coming in are the same. If so, we
// don't need to create a new PHI node, unless it's needed for LCSSA.
Value *InVal = 0;
if (!HasLoopExit) {
InVal = PN->getIncomingValueForBlock(Preds[0]);
for (unsigned i = 1, e = Preds.size(); i != e; ++i)
if (InVal != PN->getIncomingValueForBlock(Preds[i])) {
InVal = 0;
break;
}
}
if (InVal) {
// If all incoming values for the new PHI would be the same, just don't
// make a new PHI. Instead, just remove the incoming values from the old
// PHI.
for (unsigned i = 0, e = Preds.size(); i != e; ++i)
PN->removeIncomingValue(Preds[i], false);
} else {
// If the values coming into the block are not the same, we need a PHI.
// Create the new PHI node, insert it into NewBB at the end of the block
PHINode *NewPHI =
PHINode::Create(PN->getType(), Preds.size(), PN->getName() + ".ph", BI);
if (AA) AA->copyValue(PN, NewPHI);
// Move all of the PHI values for 'Preds' to the new PHI.
for (unsigned i = 0, e = Preds.size(); i != e; ++i) {
Value *V = PN->removeIncomingValue(Preds[i], false);
NewPHI->addIncoming(V, Preds[i]);
}
InVal = NewPHI;
}
// Add an incoming value to the PHI node in the loop for the preheader
// edge.
PN->addIncoming(InVal, NewBB);
}
}
/// SplitBlockPredecessors - This method transforms BB by introducing a new
/// basic block into the function, and moving some of the predecessors of BB to
/// be predecessors of the new block. The new predecessors are indicated by the
/// Preds array, which has NumPreds elements in it. The new block is given a
/// suffix of 'Suffix'.
///
/// This currently updates the LLVM IR, AliasAnalysis, DominatorTree,
/// LoopInfo, and LCCSA but no other analyses. In particular, it does not
/// preserve LoopSimplify (because it's complicated to handle the case where one
/// of the edges being split is an exit of a loop with other exits).
///
BasicBlock *llvm::SplitBlockPredecessors(BasicBlock *BB,
ArrayRef<BasicBlock*> Preds,
const char *Suffix, Pass *P) {
// Create new basic block, insert right before the original block.
BasicBlock *NewBB = BasicBlock::Create(BB->getContext(), BB->getName()+Suffix,
BB->getParent(), BB);
// The new block unconditionally branches to the old block.
BranchInst *BI = BranchInst::Create(BB, NewBB);
// Move the edges from Preds to point to NewBB instead of BB.
for (unsigned i = 0, e = Preds.size(); i != e; ++i) {
// This is slightly more strict than necessary; the minimum requirement
// is that there be no more than one indirectbr branching to BB. And
// all BlockAddress uses would need to be updated.
assert(!isa<IndirectBrInst>(Preds[i]->getTerminator()) &&
"Cannot split an edge from an IndirectBrInst");
Preds[i]->getTerminator()->replaceUsesOfWith(BB, NewBB);
}
// Insert a new PHI node into NewBB for every PHI node in BB and that new PHI
// node becomes an incoming value for BB's phi node. However, if the Preds
// list is empty, we need to insert dummy entries into the PHI nodes in BB to
// account for the newly created predecessor.
if (Preds.size() == 0) {
// Insert dummy values as the incoming value.
for (BasicBlock::iterator I = BB->begin(); isa<PHINode>(I); ++I)
cast<PHINode>(I)->addIncoming(UndefValue::get(I->getType()), NewBB);
return NewBB;
}
// Update DominatorTree, LoopInfo, and LCCSA analysis information.
bool HasLoopExit = false;
UpdateAnalysisInformation(BB, NewBB, Preds, P, HasLoopExit);
// Update the PHI nodes in BB with the values coming from NewBB.
UpdatePHINodes(BB, NewBB, Preds, BI, P, HasLoopExit);
return NewBB;
}
/// SplitLandingPadPredecessors - This method transforms the landing pad,
/// OrigBB, by introducing two new basic blocks into the function. One of those
/// new basic blocks gets the predecessors listed in Preds. The other basic
/// block gets the remaining predecessors of OrigBB. The landingpad instruction
/// OrigBB is clone into both of the new basic blocks. The new blocks are given
/// the suffixes 'Suffix1' and 'Suffix2', and are returned in the NewBBs vector.
///
/// This currently updates the LLVM IR, AliasAnalysis, DominatorTree,
/// DominanceFrontier, LoopInfo, and LCCSA but no other analyses. In particular,
/// it does not preserve LoopSimplify (because it's complicated to handle the
/// case where one of the edges being split is an exit of a loop with other
/// exits).
///
void llvm::SplitLandingPadPredecessors(BasicBlock *OrigBB,
ArrayRef<BasicBlock*> Preds,
const char *Suffix1, const char *Suffix2,
Pass *P,
SmallVectorImpl<BasicBlock*> &NewBBs) {
assert(OrigBB->isLandingPad() && "Trying to split a non-landing pad!");
// Create a new basic block for OrigBB's predecessors listed in Preds. Insert
// it right before the original block.
BasicBlock *NewBB1 = BasicBlock::Create(OrigBB->getContext(),
OrigBB->getName() + Suffix1,
OrigBB->getParent(), OrigBB);
NewBBs.push_back(NewBB1);
// The new block unconditionally branches to the old block.
BranchInst *BI1 = BranchInst::Create(OrigBB, NewBB1);
// Move the edges from Preds to point to NewBB1 instead of OrigBB.
for (unsigned i = 0, e = Preds.size(); i != e; ++i) {
// This is slightly more strict than necessary; the minimum requirement
// is that there be no more than one indirectbr branching to BB. And
// all BlockAddress uses would need to be updated.
assert(!isa<IndirectBrInst>(Preds[i]->getTerminator()) &&
"Cannot split an edge from an IndirectBrInst");
Preds[i]->getTerminator()->replaceUsesOfWith(OrigBB, NewBB1);
}
// Update DominatorTree, LoopInfo, and LCCSA analysis information.
bool HasLoopExit = false;
UpdateAnalysisInformation(OrigBB, NewBB1, Preds, P, HasLoopExit);
// Update the PHI nodes in OrigBB with the values coming from NewBB1.
UpdatePHINodes(OrigBB, NewBB1, Preds, BI1, P, HasLoopExit);
// Move the remaining edges from OrigBB to point to NewBB2.
SmallVector<BasicBlock*, 8> NewBB2Preds;
for (pred_iterator i = pred_begin(OrigBB), e = pred_end(OrigBB);
i != e; ) {
BasicBlock *Pred = *i++;
if (Pred == NewBB1) continue;
assert(!isa<IndirectBrInst>(Pred->getTerminator()) &&
"Cannot split an edge from an IndirectBrInst");
NewBB2Preds.push_back(Pred);
e = pred_end(OrigBB);
}
BasicBlock *NewBB2 = 0;
if (!NewBB2Preds.empty()) {
// Create another basic block for the rest of OrigBB's predecessors.
NewBB2 = BasicBlock::Create(OrigBB->getContext(),
OrigBB->getName() + Suffix2,
OrigBB->getParent(), OrigBB);
NewBBs.push_back(NewBB2);
// The new block unconditionally branches to the old block.
BranchInst *BI2 = BranchInst::Create(OrigBB, NewBB2);
// Move the remaining edges from OrigBB to point to NewBB2.
for (SmallVectorImpl<BasicBlock*>::iterator
i = NewBB2Preds.begin(), e = NewBB2Preds.end(); i != e; ++i)
(*i)->getTerminator()->replaceUsesOfWith(OrigBB, NewBB2);
// Update DominatorTree, LoopInfo, and LCCSA analysis information.
HasLoopExit = false;
UpdateAnalysisInformation(OrigBB, NewBB2, NewBB2Preds, P, HasLoopExit);
// Update the PHI nodes in OrigBB with the values coming from NewBB2.
UpdatePHINodes(OrigBB, NewBB2, NewBB2Preds, BI2, P, HasLoopExit);
}
LandingPadInst *LPad = OrigBB->getLandingPadInst();
Instruction *Clone1 = LPad->clone();
Clone1->setName(Twine("lpad") + Suffix1);
NewBB1->getInstList().insert(NewBB1->getFirstInsertionPt(), Clone1);
if (NewBB2) {
Instruction *Clone2 = LPad->clone();
Clone2->setName(Twine("lpad") + Suffix2);
NewBB2->getInstList().insert(NewBB2->getFirstInsertionPt(), Clone2);
// Create a PHI node for the two cloned landingpad instructions.
PHINode *PN = PHINode::Create(LPad->getType(), 2, "lpad.phi", LPad);
PN->addIncoming(Clone1, NewBB1);
PN->addIncoming(Clone2, NewBB2);
LPad->replaceAllUsesWith(PN);
LPad->eraseFromParent();
} else {
// There is no second clone. Just replace the landing pad with the first
// clone.
LPad->replaceAllUsesWith(Clone1);
LPad->eraseFromParent();
}
}
/// FindFunctionBackedges - Analyze the specified function to find all of the
/// loop backedges in the function and return them. This is a relatively cheap
/// (compared to computing dominators and loop info) analysis.
///
/// The output is added to Result, as pairs of <from,to> edge info.
void llvm::FindFunctionBackedges(const Function &F,
SmallVectorImpl<std::pair<const BasicBlock*,const BasicBlock*> > &Result) {
const BasicBlock *BB = &F.getEntryBlock();
if (succ_begin(BB) == succ_end(BB))
return;
SmallPtrSet<const BasicBlock*, 8> Visited;
SmallVector<std::pair<const BasicBlock*, succ_const_iterator>, 8> VisitStack;
SmallPtrSet<const BasicBlock*, 8> InStack;
Visited.insert(BB);
VisitStack.push_back(std::make_pair(BB, succ_begin(BB)));
InStack.insert(BB);
do {
std::pair<const BasicBlock*, succ_const_iterator> &Top = VisitStack.back();
const BasicBlock *ParentBB = Top.first;
succ_const_iterator &I = Top.second;
bool FoundNew = false;
while (I != succ_end(ParentBB)) {
BB = *I++;
if (Visited.insert(BB)) {
FoundNew = true;
break;
}
// Successor is in VisitStack, it's a back edge.
if (InStack.count(BB))
Result.push_back(std::make_pair(ParentBB, BB));
}
if (FoundNew) {
// Go down one level if there is a unvisited successor.
InStack.insert(BB);
VisitStack.push_back(std::make_pair(BB, succ_begin(BB)));
} else {
// Go up one level.
InStack.erase(VisitStack.pop_back_val().first);
}
} while (!VisitStack.empty());
}
/// FoldReturnIntoUncondBranch - This method duplicates the specified return
/// instruction into a predecessor which ends in an unconditional branch. If
/// the return instruction returns a value defined by a PHI, propagate the
/// right value into the return. It returns the new return instruction in the
/// predecessor.
ReturnInst *llvm::FoldReturnIntoUncondBranch(ReturnInst *RI, BasicBlock *BB,
BasicBlock *Pred) {
Instruction *UncondBranch = Pred->getTerminator();
// Clone the return and add it to the end of the predecessor.
Instruction *NewRet = RI->clone();
Pred->getInstList().push_back(NewRet);
// If the return instruction returns a value, and if the value was a
// PHI node in "BB", propagate the right value into the return.
for (User::op_iterator i = NewRet->op_begin(), e = NewRet->op_end();
i != e; ++i)
if (PHINode *PN = dyn_cast<PHINode>(*i))
if (PN->getParent() == BB)
*i = PN->getIncomingValueForBlock(Pred);
// Update any PHI nodes in the returning block to realize that we no
// longer branch to them.
BB->removePredecessor(Pred);
UncondBranch->eraseFromParent();
return cast<ReturnInst>(NewRet);
}
/// GetFirstDebugLocInBasicBlock - Return first valid DebugLoc entry in a
/// given basic block.
DebugLoc llvm::GetFirstDebugLocInBasicBlock(const BasicBlock *BB) {
if (const Instruction *I = BB->getFirstNonPHI())
return I->getDebugLoc();
// Scanning entire block may be too expensive, if the first instruction
// does not have valid location info.
return DebugLoc();
}