| Current Path : /usr/src/contrib/ntp/include/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/contrib/ntp/include/ntp.h |
/*
* ntp.h - NTP definitions for the masses
*/
#ifndef NTP_H
#define NTP_H
#include "ntp_types.h"
#include <math.h>
#ifdef OPENSSL
#include "ntp_crypto.h"
#endif /* OPENSSL */
#include <ntp_random.h>
#include <isc/boolean.h>
#include <isc/list.h>
/*
* Calendar arithmetic - contributed by G. Healton
*/
#define YEAR_BREAK 500 /* years < this are tm_year values:
* Break < AnyFourDigitYear && Break >
* Anytm_yearYear */
#define YEAR_PIVOT 98 /* 97/98: years < this are year 2000+
* FYI: official UNIX pivot year is
* 68/69 */
/*
* Number of Days since 1 BC Gregorian to 1 January of given year
*/
#define julian0(year) (((year) * 365 ) + ((year) > 0 ? (((year) + 3) \
/ 4 - ((year - 1) / 100) + ((year - 1) / \
400)) : 0))
/*
* Number of days since start of NTP time to 1 January of given year
*/
#define ntp0(year) (julian0(year) - julian0(1900))
/*
* Number of days since start of UNIX time to 1 January of given year
*/
#define unix0(year) (julian0(year) - julian0(1970))
/*
* LEAP YEAR test for full 4-digit years (e.g, 1999, 2010)
*/
#define isleap_4(y) ((y) % 4 == 0 && !((y) % 100 == 0 && !(y % \
400 == 0)))
/*
* LEAP YEAR test for tm_year (struct tm) years (e.g, 99, 110)
*/
#define isleap_tm(y) ((y) % 4 == 0 && !((y) % 100 == 0 && !(((y) \
+ 1900) % 400 == 0)))
/*
* to convert simple two-digit years to tm_year style years:
*
* if (year < YEAR_PIVOT)
* year += 100;
*
* to convert either two-digit OR tm_year years to four-digit years:
*
* if (year < YEAR_PIVOT)
* year += 100;
*
* if (year < YEAR_BREAK)
* year += 1900;
*/
/*
* How to get signed characters. On machines where signed char works,
* use it. On machines where signed char doesn't work, char had better
* be signed.
*/
#ifdef NEED_S_CHAR_TYPEDEF
# if SIZEOF_SIGNED_CHAR
typedef signed char s_char;
# else
typedef char s_char;
# endif
/* XXX: Why is this sequent bit INSIDE this test? */
# ifdef sequent
# undef SO_RCVBUF
# undef SO_SNDBUF
# endif
#endif
#ifndef TRUE
# define TRUE 1
#endif /* TRUE */
#ifndef FALSE
# define FALSE 0
#endif /* FALSE */
/*
* NTP protocol parameters. See section 3.2.6 of the specification.
*/
#define NTP_VERSION ((u_char)4) /* current version number */
#define NTP_OLDVERSION ((u_char)1) /* oldest credible version */
#define NTP_PORT 123 /* included for non-unix machines */
/*
* Poll interval parameters
*/
#define NTP_UNREACH 24 /* poll unreach threshold */
#define NTP_MINPOLL 4 /* log2 min poll interval (16 s) */
#define NTP_MINDPOLL 6 /* log2 default min poll (64 s) */
#define NTP_MAXDPOLL 10 /* log2 default max poll (~17 m) */
#define NTP_MAXPOLL 17 /* log2 max poll interval (~36 h) */
#define NTP_BURST 8 /* packets in burst */
#define BURST_DELAY 2 /* interburst delay (s) */
#define RESP_DELAY 1 /* crypto response delay (s) */
/*
* Clock filter algorithm tuning parameters
*/
#define MAXDISPERSE 16. /* max dispersion */
#define NTP_SHIFT 8 /* clock filter stages */
#define NTP_FWEIGHT .5 /* clock filter weight */
/*
* Selection algorithm tuning parameters
*/
#define NTP_MINCLOCK 3 /* min survivors */
#define NTP_MAXCLOCK 10 /* max candidates */
#define NTP_MAXASSOC 50 /* max associations */
#define MINDISPERSE .005 /* min dispersion increment */
#define MAXDISTANCE 1. /* max root distance (select threshold) */
#define CLOCK_SGATE 3. /* popcorn spike gate */
#define HUFFPUFF 900 /* huff-n'-puff sample interval (s) */
#define MAXHOP 2 /* anti-clockhop threshold */
#define MAX_TTL 8 /* max ttl mapping vector size */
#define BEACON 7200 /* manycast beacon interval */
#define NTP_MAXEXTEN 1024 /* max extension field size */
/*
* Miscellaneous stuff
*/
#define NTP_MAXKEY 65535 /* max authentication key number */
/*
* Limits of things
*/
#define MAXFILENAME 128 /* max length of file name */
#define MAXHOSTNAME 512 /* max length of host/node name */
#define NTP_MAXSTRLEN 256 /* max string length */
/*
* Operations for jitter calculations (these use doubles).
*
* Note that we carefully separate the jitter component from the
* dispersion component (frequency error plus precision). The frequency
* error component is computed as CLOCK_PHI times the difference between
* the epoch of the time measurement and the reference time. The
* precision componen is computed as the square root of the mean of the
* squares of a zero-mean, uniform distribution of unit maximum
* amplitude. Whether this makes statistical sense may be arguable.
*/
#define SQUARE(x) ((x) * (x))
#define SQRT(x) (sqrt(x))
#define DIFF(x, y) (SQUARE((x) - (y)))
#define LOGTOD(a) ((a) < 0 ? 1. / (1L << -(a)) : \
1L << (int)(a)) /* log2 to double */
#define UNIVAR(x) (SQUARE(.28867513 * LOGTOD(x))) /* std uniform distr */
#define ULOGTOD(a) (1L << (int)(a)) /* ulog2 to double */
#define EVENT_TIMEOUT 0 /* one second, that is */
/*
* The interface structure is used to hold the addresses and socket
* numbers of each of the interfaces we are using.
*/
struct interface {
SOCKET fd; /* socket this is opened on */
SOCKET bfd; /* socket for receiving broadcasts */
struct sockaddr_storage sin; /* interface address */
struct sockaddr_storage bcast; /* broadcast address */
struct sockaddr_storage mask; /* interface mask */
char name[32]; /* name of interface */
short family; /* Address family */
int flags; /* interface flags */
int last_ttl; /* last TTL specified */
u_int32 addr_refid; /* IPv4 addr or IPv6 hash */
int num_mcast; /* No. of IP addresses in multicast socket */
u_long starttime; /* current_time as of creation of interface structure */
volatile long received; /* number of incoming packets */
long sent; /* number of outgoing packets */
long notsent; /* number of send failures */
u_int scopeid; /* Scope used for Multicasting */
u_int ifindex; /* interface index */
u_int ifnum; /* sequential interface instance count */
u_char phase; /* phase in update cycle */
isc_boolean_t ignore_packets; /* Specify whether the packet should be ignored */
ISC_LIST(struct peer) peers; /* list of peers for the interface */
u_int peercnt; /* number of peers referencinf this interface - informational only */
ISC_LINK(struct interface) link; /* interface list */
};
/*
* Flags for interfaces
*/
#define INT_UP 0x001 /* Interface is up */
#define INT_PPP 0x002 /* Point-to-point interface */
#define INT_LOOPBACK 0x004 /* the loopback interface */
#define INT_BROADCAST 0x008 /* can broadcast out this interface */
#define INT_MULTICAST 0x010 /* can multicast out this interface */
#define INT_BCASTOPEN 0x020 /* broadcast socket is open */
#define INT_MCASTOPEN 0x040 /* multicasting enabled */
#define INT_WILDCARD 0x080 /* wildcard interface - usually skipped */
#define INT_MCASTIF 0x100 /* bound directly to MCAST address */
/*
* Define flasher bits (tests 1 through 11 in packet procedure)
* These reveal the state at the last grumble from the peer and are
* most handy for diagnosing problems, even if not strictly a state
* variable in the spec. These are recorded in the peer structure.
*
* Packet errors
*/
#define TEST1 0X0001 /* duplicate packet */
#define TEST2 0x0002 /* bogus packet */
#define TEST3 0x0004 /* protocol unsynchronized */
#define TEST4 0x0008 /* access denied */
#define TEST5 0x0010 /* authentication error */
#define TEST6 0x0020 /* bad synch or stratum */
#define TEST7 0x0040 /* bad header data */
#define TEST8 0x0080 /* autokey error */
#define TEST9 0x0100 /* crypto error */
#define PKT_TEST_MASK (TEST1 | TEST2 | TEST3 | TEST4 | TEST5 |\
TEST6 | TEST7 | TEST8 | TEST9)
/*
* Peer errors
*/
#define TEST10 0x0200 /* peer bad synch or stratum */
#define TEST11 0x0400 /* peer distance exceeded */
#define TEST12 0x0800 /* peer synchronization loop */
#define TEST13 0x1000 /* peer unreacable */
#define PEER_TEST_MASK (TEST10 | TEST11 | TEST12 | TEST13)
/*
* Authentication codes
*/
#define AUTH_NONE 0 /* no authentication */
#define AUTH_OK 1 /* authentication OK */
#define AUTH_ERROR 2 /* authentication error */
#define AUTH_CRYPTO 3 /* crypto-NAK */
/*
* The peer structure. Holds state information relating to the guys
* we are peering with. Most of this stuff is from section 3.2 of the
* spec.
*/
struct peer {
struct peer *next; /* pointer to next association */
struct peer *ass_next; /* link pointer in associd hash */
struct sockaddr_storage srcadr; /* address of remote host */
struct interface *dstadr; /* pointer to address on local host */
ISC_LINK(struct peer) ilink; /* interface link list */
associd_t associd; /* association ID */
u_char version; /* version number */
u_char hmode; /* local association mode */
u_char hpoll; /* local poll interval */
u_char minpoll; /* min poll interval */
u_char maxpoll; /* max poll interval */
u_int flags; /* association flags */
u_char cast_flags; /* additional flags */
u_int flash; /* protocol error test tally bits */
u_char last_event; /* last peer error code */
u_char num_events; /* number of error events */
u_char ttl; /* ttl/refclock mode */
/*
* Variables used by reference clock support
*/
#ifdef REFCLOCK
struct refclockproc *procptr; /* refclock structure pointer */
u_char refclktype; /* reference clock type */
u_char refclkunit; /* reference clock unit number */
u_char sstclktype; /* clock type for system status word */
#endif /* REFCLOCK */
/*
* Variables set by received packet
*/
u_char leap; /* local leap indicator */
u_char pmode; /* remote association mode */
u_char stratum; /* remote stratum */
u_char ppoll; /* remote poll interval */
s_char precision; /* remote clock precision */
double rootdelay; /* roundtrip delay to primary clock */
double rootdispersion; /* dispersion to primary clock */
u_int32 refid; /* remote reference ID */
l_fp reftime; /* update epoch */
/*
* Variables used by authenticated client
*/
keyid_t keyid; /* current key ID */
#ifdef OPENSSL
#define clear_to_zero assoc
associd_t assoc; /* peer association ID */
u_int32 crypto; /* peer status word */
EVP_PKEY *pkey; /* public key */
const EVP_MD *digest; /* message digest algorithm */
char *subject; /* certificate subject name */
char *issuer; /* certificate issuer name */
keyid_t pkeyid; /* previous key ID */
keyid_t pcookie; /* peer cookie */
EVP_PKEY *ident_pkey; /* identity key */
tstamp_t fstamp; /* identity filestamp */
BIGNUM *iffval; /* IFF/GQ challenge */
BIGNUM *grpkey; /* GQ group key */
struct value cookval; /* cookie values */
struct value recval; /* receive autokey values */
struct exten *cmmd; /* extension pointer */
/*
* Variables used by authenticated server
*/
keyid_t *keylist; /* session key ID list */
int keynumber; /* current key number */
struct value encrypt; /* send encrypt values */
struct value sndval; /* send autokey values */
struct value tai_leap; /* send leapsecond table */
#else /* OPENSSL */
#define clear_to_zero status
#endif /* OPENSSL */
/*
* Ephemeral state variables
*/
u_char status; /* peer status */
u_char reach; /* reachability register */
u_long epoch; /* reference epoch */
u_int burst; /* packets remaining in burst */
u_int filter_nextpt; /* index into filter shift register */
double filter_delay[NTP_SHIFT]; /* delay shift register */
double filter_offset[NTP_SHIFT]; /* offset shift register */
double filter_disp[NTP_SHIFT]; /* dispersion shift register */
u_long filter_epoch[NTP_SHIFT]; /* epoch shift register */
u_char filter_order[NTP_SHIFT]; /* filter sort index */
l_fp org; /* originate time stamp */
l_fp rec; /* receive time stamp */
l_fp xmt; /* transmit time stamp */
double offset; /* peer clock offset */
double delay; /* peer roundtrip delay */
double jitter; /* peer jitter (squares) */
double disp; /* peer dispersion */
double estbdelay; /* clock offset to broadcast server */
/*
* End of clear-to-zero area
*/
u_long update; /* receive epoch */
u_int unreach; /* unreachable count */
#define end_clear_to_zero unreach
u_long outdate; /* send time last packet */
u_long nextdate; /* send time next packet */
u_long nextaction; /* peer local activity timeout (refclocks) */
void (*action) P((struct peer *)); /* action timeout function */
/*
* Statistic counters
*/
u_long timereset; /* time stat counters were reset */
u_long timereceived; /* last packet received time */
u_long timereachable; /* last reachable/unreachable time */
u_long sent; /* packets sent */
u_long received; /* packets received */
u_long processed; /* packets processed by the protocol */
u_long badauth; /* packets cryptosum failed */
u_long bogusorg; /* packets bogus origin */
u_long oldpkt; /* packets duplicate packet */
u_long seldisptoolarge; /* packets dispersion too large */
u_long selbroken; /* not used */
};
/*
* Values for peer.leap, sys_leap
*/
#define LEAP_NOWARNING 0x0 /* normal, no leap second warning */
#define LEAP_ADDSECOND 0x1 /* last minute of day has 61 seconds */
#define LEAP_DELSECOND 0x2 /* last minute of day has 59 seconds */
#define LEAP_NOTINSYNC 0x3 /* overload, clock is free running */
/*
* Values for peer mode and packet mode. Only the modes through
* MODE_BROADCAST and MODE_BCLIENT appear in the transition
* function. MODE_CONTROL and MODE_PRIVATE can appear in packets,
* but those never survive to the transition function.
* is a
*/
#define MODE_UNSPEC 0 /* unspecified (old version) */
#define MODE_ACTIVE 1 /* symmetric active mode */
#define MODE_PASSIVE 2 /* symmetric passive mode */
#define MODE_CLIENT 3 /* client mode */
#define MODE_SERVER 4 /* server mode */
#define MODE_BROADCAST 5 /* broadcast mode */
/*
* These can appear in packets
*/
#define MODE_CONTROL 6 /* control mode */
#define MODE_PRIVATE 7 /* private mode */
/*
* This is a madeup mode for broadcast client.
*/
#define MODE_BCLIENT 6 /* broadcast client mode */
/*
* Values for peer.stratum, sys_stratum
*/
#define STRATUM_REFCLOCK ((u_char)0) /* default stratum */
/* A stratum of 0 in the packet is mapped to 16 internally */
#define STRATUM_PKT_UNSPEC ((u_char)0) /* unspecified in packet */
#define STRATUM_UNSPEC ((u_char)16) /* unspecified */
/*
* Values for peer.flags
*/
#define FLAG_CONFIG 0x0001 /* association was configured */
#define FLAG_AUTHENABLE 0x0002 /* authentication required */
#define FLAG_AUTHENTIC 0x0004 /* last message was authentic */
#define FLAG_SKEY 0x0008 /* autokey authentication */
#define FLAG_MCAST 0x0010 /* multicast client mode */
#define FLAG_REFCLOCK 0x0020 /* this is actually a reference clock */
#define FLAG_SYSPEER 0x0040 /* this is one of the selected peers */
#define FLAG_PREFER 0x0080 /* this is the preferred peer */
#define FLAG_BURST 0x0100 /* burst mode */
#define FLAG_IBURST 0x0200 /* initial burst mode */
#define FLAG_NOSELECT 0x0400 /* never select */
#define FLAG_ASSOC 0x0800 /* autokey request */
#define FLAG_FIXPOLL 0x1000 /* stick at minpoll */
#define FLAG_TRUE 0x2000 /* select truechimer */
#define FLAG_PREEMPT 0x4000 /* preemptable association */
/*
* Definitions for the clear() routine. We use memset() to clear
* the parts of the peer structure which go to zero. These are
* used to calculate the start address and length of the area.
*/
#define CLEAR_TO_ZERO(p) ((char *)&((p)->clear_to_zero))
#define END_CLEAR_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero))
#define LEN_CLEAR_TO_ZERO (END_CLEAR_TO_ZERO((struct peer *)0) \
- CLEAR_TO_ZERO((struct peer *)0))
#define CRYPTO_TO_ZERO(p) ((char *)&((p)->clear_to_zero))
#define END_CRYPTO_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero))
#define LEN_CRYPTO_TO_ZERO (END_CRYPTO_TO_ZERO((struct peer *)0) \
- CRYPTO_TO_ZERO((struct peer *)0))
/*
* Reference clock identifiers (for pps signal)
*/
#define PPSREFID (u_int32)"PPS " /* used when pps controls stratum>1 */
/*
* Reference clock types. Added as necessary.
*/
#define REFCLK_NONE 0 /* unknown or missing */
#define REFCLK_LOCALCLOCK 1 /* external (e.g., lockclock) */
#define REFCLK_GPS_TRAK 2 /* TRAK 8810 GPS Receiver */
#define REFCLK_WWV_PST 3 /* PST/Traconex 1020 WWV/H */
#define REFCLK_SPECTRACOM 4 /* Spectracom (generic) Receivers */
#define REFCLK_TRUETIME 5 /* TrueTime (generic) Receivers */
#define REFCLK_IRIG_AUDIO 6 /* IRIG-B/W audio decoder */
#define REFCLK_CHU_AUDIO 7 /* CHU audio demodulator/decoder */
#define REFCLK_PARSE 8 /* generic driver (usually DCF77,GPS,MSF) */
#define REFCLK_GPS_MX4200 9 /* Magnavox MX4200 GPS */
#define REFCLK_GPS_AS2201 10 /* Austron 2201A GPS */
#define REFCLK_GPS_ARBITER 11 /* Arbiter 1088A/B/ GPS */
#define REFCLK_IRIG_TPRO 12 /* KSI/Odetics TPRO-S IRIG */
#define REFCLK_ATOM_LEITCH 13 /* Leitch CSD 5300 Master Clock */
#define REFCLK_MSF_EES 14 /* EES M201 MSF Receiver */
#define REFCLK_GPSTM_TRUE 15 /* OLD TrueTime GPS/TM-TMD Receiver */
#define REFCLK_IRIG_BANCOMM 16 /* Bancomm GPS/IRIG Interface */
#define REFCLK_GPS_DATUM 17 /* Datum Programmable Time System */
#define REFCLK_ACTS 18 /* Generic Auto Computer Time Service */
#define REFCLK_WWV_HEATH 19 /* Heath GC1000 WWV/WWVH Receiver */
#define REFCLK_GPS_NMEA 20 /* NMEA based GPS clock */
#define REFCLK_GPS_VME 21 /* TrueTime GPS-VME Interface */
#define REFCLK_ATOM_PPS 22 /* 1-PPS Clock Discipline */
#define REFCLK_PTB_ACTS 23 /* replaced by REFCLK_ACTS */
#define REFCLK_USNO 24 /* replaced by REFCLK_ACTS */
#define REFCLK_GPS_HP 26 /* HP 58503A Time/Frequency Receiver */
#define REFCLK_ARCRON_MSF 27 /* ARCRON MSF radio clock. */
#define REFCLK_SHM 28 /* clock attached thru shared memory */
#define REFCLK_PALISADE 29 /* Trimble Navigation Palisade GPS */
#define REFCLK_ONCORE 30 /* Motorola UT Oncore GPS */
#define REFCLK_GPS_JUPITER 31 /* Rockwell Jupiter GPS receiver */
#define REFCLK_CHRONOLOG 32 /* Chrono-log K WWVB receiver */
#define REFCLK_DUMBCLOCK 33 /* Dumb localtime clock */
#define REFCLK_ULINK 34 /* Ultralink M320 WWVB receiver */
#define REFCLK_PCF 35 /* Conrad parallel port radio clock */
#define REFCLK_WWV_AUDIO 36 /* WWV/H audio demodulator/decoder */
#define REFCLK_FG 37 /* Forum Graphic GPS */
#define REFCLK_HOPF_SERIAL 38 /* hopf DCF77/GPS serial receiver */
#define REFCLK_HOPF_PCI 39 /* hopf DCF77/GPS PCI receiver */
#define REFCLK_JJY 40 /* JJY receiver */
#define REFCLK_TT560 41 /* TrueTime 560 IRIG-B decoder */
#define REFCLK_ZYFER 42 /* Zyfer GPStarplus receiver */
#define REFCLK_RIPENCC 43 /* RIPE NCC Trimble driver */
#define REFCLK_NEOCLOCK4X 44 /* NeoClock4X DCF77 or TDF receiver */
#define REFCLK_MAX 44 /* NeoClock4X DCF77 or TDF receiver */
/*
* Macro for sockaddr_storage structures operations
*/
#define SOCKCMP(sock1, sock2) \
(((struct sockaddr_storage *)sock1)->ss_family \
== ((struct sockaddr_storage *)sock2)->ss_family ? \
((struct sockaddr_storage *)sock1)->ss_family == AF_INET ? \
memcmp(&((struct sockaddr_in *)sock1)->sin_addr, \
&((struct sockaddr_in *)sock2)->sin_addr, \
sizeof(struct in_addr)) == 0 : \
memcmp(&((struct sockaddr_in6 *)sock1)->sin6_addr, \
&((struct sockaddr_in6 *)sock2)->sin6_addr, \
sizeof(struct in6_addr)) == 0 : \
0)
#define SOCKNUL(sock1) \
(((struct sockaddr_storage *)sock1)->ss_family == AF_INET ? \
(((struct sockaddr_in *)sock1)->sin_addr.s_addr == 0) : \
(IN6_IS_ADDR_UNSPECIFIED(&((struct sockaddr_in6 *)sock1)->sin6_addr)))
#define SOCKLEN(sock) \
(((struct sockaddr_storage *)sock)->ss_family == AF_INET ? \
(sizeof(struct sockaddr_in)) : (sizeof(struct sockaddr_in6)))
#define ANYSOCK(sock) \
memset(((struct sockaddr_storage *)sock), 0, \
sizeof(struct sockaddr_storage))
#define ANY_INTERFACE_CHOOSE(sock) \
(((struct sockaddr_storage *)sock)->ss_family == AF_INET ? \
any_interface : any6_interface)
/*
* We tell reference clocks from real peers by giving the reference
* clocks an address of the form 127.127.t.u, where t is the type and
* u is the unit number. We define some of this here since we will need
* some sanity checks to make sure this address isn't interpretted as
* that of a normal peer.
*/
#define REFCLOCK_ADDR 0x7f7f0000 /* 127.127.0.0 */
#define REFCLOCK_MASK 0xffff0000 /* 255.255.0.0 */
#define ISREFCLOCKADR(srcadr) ((SRCADR(srcadr) & REFCLOCK_MASK) \
== REFCLOCK_ADDR)
/*
* Macro for checking for invalid addresses. This is really, really
* gross, but is needed so no one configures a host on net 127 now that
* we're encouraging it the the configuration file.
*/
#define LOOPBACKADR 0x7f000001
#define LOOPNETMASK 0xff000000
#define ISBADADR(srcadr) (((SRCADR(srcadr) & LOOPNETMASK) \
== (LOOPBACKADR & LOOPNETMASK)) \
&& (SRCADR(srcadr) != LOOPBACKADR))
/*
* Utilities for manipulating addresses and port numbers
*/
#define NSRCADR(src) (((struct sockaddr_in *)src)->sin_addr.s_addr) /* address in net byte order */
#define NSRCPORT(src) (((struct sockaddr_in *)src)->sin_port) /* port in net byte order */
#define SRCADR(src) (ntohl(NSRCADR((src)))) /* address in host byte order */
#define SRCPORT(src) (ntohs(NSRCPORT((src)))) /* host port */
#define CAST_V4(src) ((struct sockaddr_in *)&(src))
#define CAST_V6(src) ((struct sockaddr_in6 *)&(src))
#define GET_INADDR(src) (CAST_V4(src)->sin_addr.s_addr)
#define GET_INADDR6(src) (CAST_V6(src)->sin6_addr)
#define SET_HOSTMASK(addr, family) \
do { \
memset((char *)(addr), 0, sizeof(struct sockaddr_storage)); \
(addr)->ss_family = (family); \
if ((family) == AF_INET) \
GET_INADDR(*(addr)) = 0xffffffff; \
else \
memset(&GET_INADDR6(*(addr)), 0xff, \
sizeof(struct in6_addr)); \
} while(0)
/*
* NTP packet format. The mac field is optional. It isn't really
* an l_fp either, but for now declaring it that way is convenient.
* See Appendix A in the specification.
*
* Note that all u_fp and l_fp values arrive in network byte order
* and must be converted (except the mac, which isn't, really).
*/
struct pkt {
u_char li_vn_mode; /* leap indicator, version and mode */
u_char stratum; /* peer stratum */
u_char ppoll; /* peer poll interval */
s_char precision; /* peer clock precision */
u_fp rootdelay; /* distance to primary clock */
u_fp rootdispersion; /* clock dispersion */
u_int32 refid; /* reference clock ID */
l_fp reftime; /* time peer clock was last updated */
l_fp org; /* originate time stamp */
l_fp rec; /* receive time stamp */
l_fp xmt; /* transmit time stamp */
#define LEN_PKT_NOMAC 12 * sizeof(u_int32) /* min header length */
#define LEN_PKT_MAC LEN_PKT_NOMAC + sizeof(u_int32)
#define MIN_MAC_LEN 3 * sizeof(u_int32) /* DES */
#define MAX_MAC_LEN 5 * sizeof(u_int32) /* MD5 */
/*
* The length of the packet less MAC must be a multiple of 64
* with an RSA modulus and Diffie-Hellman prime of 64 octets
* and maximum host name of 128 octets, the maximum autokey
* command is 152 octets and maximum autokey response is 460
* octets. A packet can contain no more than one command and one
* response, so the maximum total extension field length is 672
* octets. But, to handle humungus certificates, the bank must
* be broke.
*/
#ifdef OPENSSL
u_int32 exten[NTP_MAXEXTEN / 4]; /* max extension field */
#else /* OPENSSL */
u_int32 exten[1]; /* misused */
#endif /* OPENSSL */
u_char mac[MAX_MAC_LEN]; /* mac */
};
/*
* Stuff for extracting things from li_vn_mode
*/
#define PKT_MODE(li_vn_mode) ((u_char)((li_vn_mode) & 0x7))
#define PKT_VERSION(li_vn_mode) ((u_char)(((li_vn_mode) >> 3) & 0x7))
#define PKT_LEAP(li_vn_mode) ((u_char)(((li_vn_mode) >> 6) & 0x3))
/*
* Stuff for putting things back into li_vn_mode
*/
#define PKT_LI_VN_MODE(li, vn, md) \
((u_char)((((li) << 6) & 0xc0) | (((vn) << 3) & 0x38) | ((md) & 0x7)))
/*
* Dealing with stratum. 0 gets mapped to 16 incoming, and back to 0
* on output.
*/
#define PKT_TO_STRATUM(s) ((u_char)(((s) == (STRATUM_PKT_UNSPEC)) ?\
(STRATUM_UNSPEC) : (s)))
#define STRATUM_TO_PKT(s) ((u_char)(((s) == (STRATUM_UNSPEC)) ?\
(STRATUM_PKT_UNSPEC) : (s)))
/*
* Event codes. Used for reporting errors/events to the control module
*/
#define PEER_EVENT 0x080 /* this is a peer event */
#define CRPT_EVENT 0x100 /* this is a crypto event */
/*
* System event codes
*/
#define EVNT_UNSPEC 0 /* unspecified */
#define EVNT_SYSRESTART 1 /* system restart */
#define EVNT_SYSFAULT 2 /* wsystem or hardware fault */
#define EVNT_SYNCCHG 3 /* new leap or synch change */
#define EVNT_PEERSTCHG 4 /* new source or stratum */
#define EVNT_CLOCKRESET 5 /* clock reset */
#define EVNT_BADDATETIM 6 /* invalid time or date */
#define EVNT_CLOCKEXCPT 7 /* reference clock exception */
/*
* Peer event codes
*/
#define EVNT_PEERIPERR (1 | PEER_EVENT) /* IP error */
#define EVNT_PEERAUTH (2 | PEER_EVENT) /* authentication failure */
#define EVNT_UNREACH (3 | PEER_EVENT) /* change to unreachable */
#define EVNT_REACH (4 | PEER_EVENT) /* change to reachable */
#define EVNT_PEERCLOCK (5 | PEER_EVENT) /* clock exception */
/*
* Clock event codes
*/
#define CEVNT_NOMINAL 0 /* unspecified */
#define CEVNT_TIMEOUT 1 /* poll timeout */
#define CEVNT_BADREPLY 2 /* bad reply format */
#define CEVNT_FAULT 3 /* hardware or software fault */
#define CEVNT_PROP 4 /* propagation failure */
#define CEVNT_BADDATE 5 /* bad date format or value */
#define CEVNT_BADTIME 6 /* bad time format or value */
#define CEVNT_MAX CEVNT_BADTIME
/*
* Very misplaced value. Default port through which we send traps.
*/
#define TRAPPORT 18447
/*
* To speed lookups, peers are hashed by the low order bits of the
* remote IP address. These definitions relate to that.
*/
#define NTP_HASH_SIZE 128
#define NTP_HASH_MASK (NTP_HASH_SIZE-1)
#define NTP_HASH_ADDR(src) sock_hash(src)
/*
* How we randomize polls. The poll interval is a power of two. We chose
* a random interval which is this value plus-minus one second.
*/
#define RANDPOLL(x) ((1 << (x)) - 1 + (ntp_random() & 0x3))
/*
* min, min3 and max. Makes it easier to transliterate the spec without
* thinking about it.
*/
#define min(a,b) (((a) < (b)) ? (a) : (b))
#define max(a,b) (((a) > (b)) ? (a) : (b))
#define min3(a,b,c) min(min((a),(b)), (c))
/*
* Configuration items. These are for the protocol module (proto_config())
*/
#define PROTO_BROADCLIENT 1
#define PROTO_PRECISION 2 /* (not used) */
#define PROTO_AUTHENTICATE 3
#define PROTO_BROADDELAY 4
#define PROTO_AUTHDELAY 5 /* (not used) */
#define PROTO_MULTICAST_ADD 6
#define PROTO_MULTICAST_DEL 7
#define PROTO_NTP 8
#define PROTO_KERNEL 9
#define PROTO_MONITOR 10
#define PROTO_FILEGEN 11
#define PROTO_PPS 12
#define PROTO_CAL 13
#define PROTO_MINCLOCK 14
#define PROTO_MAXCLOCK 15
#define PROTO_MINSANE 16
#define PROTO_FLOOR 17
#define PROTO_CEILING 18
#define PROTO_COHORT 19
#define PROTO_CALLDELAY 20
#define PROTO_MINDISP 21
#define PROTO_MAXDIST 22
#define PROTO_ADJ 23
#define PROTO_MAXHOP 24
#define PROTO_BEACON 25
#define PROTO_ORPHAN 26
/*
* Configuration items for the loop filter
*/
#define LOOP_DRIFTINIT 1 /* set initial frequency offset */
#define LOOP_DRIFTCOMP 2 /* set frequency offset */
#define LOOP_MAX 3 /* set step offset */
#define LOOP_PANIC 4 /* set panic offseet */
#define LOOP_PHI 5 /* set dispersion rate */
#define LOOP_MINSTEP 6 /* set step timeout */
#define LOOP_MINPOLL 7 /* set min poll interval (log2 s) */
#define LOOP_ALLAN 8 /* set minimum Allan intercept */
#define LOOP_HUFFPUFF 9 /* set huff-n'-puff filter length */
#define LOOP_FREQ 10 /* set initial frequency */
#define LOOP_KERN_CLEAR 11 /* reset kernel pll parameters */
/*
* Configuration items for the stats printer
*/
#define STATS_FREQ_FILE 1 /* configure drift file */
#define STATS_STATSDIR 2 /* directory prefix for stats files */
#define STATS_PID_FILE 3 /* configure ntpd PID file */
#define MJD_1900 15020 /* MJD for 1 Jan 1900 */
/*
* Default parameters. We use these in the absence of something better.
*/
#define DEFBROADDELAY 4e-3 /* default broadcast offset */
#define INADDR_NTP 0xe0000101 /* NTP multicast address 224.0.1.1 */
/*
* Structure used optionally for monitoring when this is turned on.
*/
struct mon_data {
struct mon_data *hash_next; /* next structure in hash list */
struct mon_data *mru_next; /* next structure in MRU list */
struct mon_data *mru_prev; /* previous structure in MRU list */
u_long drop_count; /* dropped due RESLIMIT*/
double avg_interval; /* average interpacket interval */
u_long lasttime; /* interval since last packet */
u_long count; /* total packet count */
struct sockaddr_storage rmtadr; /* address of remote host */
struct interface *interface; /* interface on which this arrived */
u_short rmtport; /* remote port last came from */
u_char mode; /* mode of incoming packet */
u_char version; /* version of incoming packet */
u_char cast_flags; /* flags MDF_?CAST */
};
/*
* Values for cast_flags
*/
#define MDF_UCAST 0x01 /* unicast */
#define MDF_MCAST 0x02 /* multicast */
#define MDF_BCAST 0x04 /* broadcast */
#define MDF_LCAST 0x08 /* localcast */
#define MDF_ACAST 0x10 /* manycast */
#define MDF_BCLNT 0x20 /* broadcast client */
#define MDF_ACLNT 0x40 /* manycast client */
/*
* Values used with mon_enabled to indicate reason for enabling monitoring
*/
#define MON_OFF 0x00 /* no monitoring */
#define MON_ON 0x01 /* monitoring explicitly enabled */
#define MON_RES 0x02 /* implicit monitoring for RES_LIMITED */
/*
* Structure used for restrictlist entries
*/
struct restrictlist {
struct restrictlist *next; /* link to next entry */
u_int32 addr; /* Ipv4 host address (host byte order) */
u_int32 mask; /* Ipv4 mask for address (host byte order) */
u_long count; /* number of packets matched */
u_short flags; /* accesslist flags */
u_short mflags; /* match flags */
};
struct restrictlist6 {
struct restrictlist6 *next; /* link to next entry */
struct in6_addr addr6; /* Ipv6 host address */
struct in6_addr mask6; /* Ipv6 mask address */
u_long count; /* number of packets matched */
u_short flags; /* accesslist flags */
u_short mflags; /* match flags */
};
/*
* Access flags
*/
#define RES_IGNORE 0x001 /* ignore packet */
#define RES_DONTSERVE 0x002 /* access denied */
#define RES_DONTTRUST 0x004 /* authentication required */
#define RES_VERSION 0x008 /* version mismatch */
#define RES_NOPEER 0x010 /* new association denied */
#define RES_LIMITED 0x020 /* packet rate exceeded */
#define RES_FLAGS (RES_IGNORE | RES_DONTSERVE |\
RES_DONTTRUST | RES_VERSION |\
RES_NOPEER | RES_LIMITED)
#define RES_NOQUERY 0x040 /* mode 6/7 packet denied */
#define RES_NOMODIFY 0x080 /* mode 6/7 modify denied */
#define RES_NOTRAP 0x100 /* mode 6/7 set trap denied */
#define RES_LPTRAP 0x200 /* mode 6/7 low priority trap */
#define RES_DEMOBILIZE 0x400 /* send kiss of death packet */
#define RES_TIMEOUT 0x800 /* timeout this entry */
#define RES_ALLFLAGS (RES_FLAGS | RES_NOQUERY |\
RES_NOMODIFY | RES_NOTRAP |\
RES_LPTRAP | RES_DEMOBILIZE |\
RES_TIMEOUT)
/*
* Match flags
*/
#define RESM_INTERFACE 0x1 /* this is an interface */
#define RESM_NTPONLY 0x2 /* match ntp port only */
/*
* Restriction configuration ops
*/
#define RESTRICT_FLAGS 1 /* add flags to restrict entry */
#define RESTRICT_UNFLAG 2 /* remove flags from restrict entry */
#define RESTRICT_REMOVE 3 /* remove a restrict entry */
#define RESTRICT_REMOVEIF 4 /* remove an interface restrict entry */
/*
* Endpoint structure for the select algorithm
*/
struct endpoint {
double val; /* offset of endpoint */
int type; /* interval entry/exit */
};
/*
* Association matching AM[] return codes
*/
#define AM_ERR -1 /* error */
#define AM_NOMATCH 0 /* no match */
#define AM_PROCPKT 1 /* server/symmetric packet */
#define AM_BCST 2 /* broadcast packet */
#define AM_FXMIT 3 /* client packet */
#define AM_MANYCAST 4 /* manycast packet */
#define AM_NEWPASS 5 /* new passive */
#define AM_NEWBCL 6 /* new broadcast */
#define AM_POSSBCL 7 /* discard broadcast */
/* NetInfo configuration locations */
#ifdef HAVE_NETINFO
#define NETINFO_CONFIG_DIR "/config/ntp"
#endif
#endif /* NTP_H */