config root man

.TH SNTP 1 2009-12-08 "( 4.2.4p8)" "Programmer's Manual"
.\"  EDIT THIS FILE WITH CAUTION  (sntp.1)
.\"  
.\"  It has been AutoGen-ed  Tuesday December  8, 2009 at 08:14:50 AM EST
.\"  From the definitions    sntp-opts.def
.\"  and the template file   agman1.tpl
.\"
.SH NAME
sntp \- standard SNTP program
.SH SYNOPSIS
.B sntp
.\" Mixture of short (flag) options and long options
.RB [ \-\fIflag\fP " [\fIvalue\fP]]... [" \--\fIopt-name\fP " [[=| ]\fIvalue\fP]]..."
.PP
All arguments must be options.
.SH "DESCRIPTION"
This manual page documents, briefly, the \fBsntp\fP command.
.I sntp
can be used as a SNTP client to query a NTP or SNTP server and either display
the time or set the local system's time (given suitable privilege).  It can be
run as an interactive command or in a
.I cron
job.
NTP is the Network Time Protocol (RFC 1305) and SNTP is the
Simple Network Time Protocol (RFC 2030, which supersedes RFC 1769).
.SS Options
.PP
.I sntp
recognizes the following options:
.TP
.B \-v
indicates that diagnostic messages for non-fatal errors and a limited amount of
tracing should be written to standard error.  Fatal ones always produce a
diagnostic.  This option should be set when there is a suspected problem with
the server, network or the source.
.TP
.B \-V
requests more and less comprehensible output, mainly for investigating problems
with apparently inconsistent timestamps.  This option should be set when the
program fails with a message indicating that is the trouble.
.TP
.B \-W
requests very verbose debugging output, and will interfere with the timing
when writing to the terminal (because of line buffered output from C).  Note
that the times produced by this are the corrections needed, and not the error
in the local clock.  This option should be set only when debugging the source.
.TP
.B \-q
indicates that it should query a daemon save file being maintained by it.
This needs no privilege and will change neither the save file nor the clock.
.PP
The default is that it should behave as a client, and the following options
are then relevant:
.TP
.B \-r
indicates that the system clock should be reset by
.IR settimeofday .
Naturally, this will work only if the user has enough privilege.
.TP
.B \-a
indicates that the system clock should be reset by
.IR adjtime .
Naturally, this will work only if the user has enough privilege.
.PP
The default is to write the estimated correct local date and time (i.e. not
UTC) to the standard output in a format like
.BR "'1996 Oct 15 20:17:25.123 + 4.567 +/- 0.089 secs'" ,
where the
.B "'+ 4.567 +/- 0.089 secs'"
indicates the estimated error in the time on the local system.
.TP
.BI \-l " lockfile"
sets the name of the lock file to ensure that there is only
one copy of
.I sntp
running at once.  The default is installation-dependent, but will usually be
.IR /etc/sntp.pid .
.TP
.BI \-e " minerr"
sets the maximum ignorable variation between the clocks to
.IR minerr .
Acceptable values are from 0.001 to 1, and the default is 0.1 if a NTP host is
is specified and 0.5 otherwise.
.TP
.BI \-E " maxerr"
sets the maximum value of various delays that are deemed acceptable to
.IR maxerr .
Acceptable values are from 1 to 60, and the default is 5.  It should sometimes
be increased if there are problems with the network, NTP server or system
clock, but take care.
.TP
.BI \-P  " prompt"
sets the maximum clock change that will be made automatically to
.IR maxerr .
Acceptable values are from 1 to 3600 or
.IR no ,
and the default is 30.  If the program is being run interactively in ordinary
client mode, and the system clock is to be changed, larger corrections will
prompt the user for confirmation.  Specifying
.I no
will disable this and the correction will be made regardless.
.TP
.BI \-c " count"
sets the maximum number of NTP packets required to
.IR count .
Acceptable values are from 1 to 25 if a NTP host is specified and from 5 to 25
otherwise, and the default is 5.  If the maximum isn't enough, the system needs
a better consistency algorithm than this program uses.
.TP
.BI \-d " delay"
sets a rough limit on the total running time to
.I delay
seconds.  Acceptable values are from 1 to 3600, and the default is 15 if a NTP
host is specified and 300 otherwise.
.TP
.B \-4
force IPv4 DNS resolution.
.TP
.B \-6
force IPv6 DNS resolution.
.PP
.B address(es)
are the DNS names or IP numbers of hosts to use for the challenge and response
protocol; if no names are given, the program waits for broadcasts.  Polling a
server is vastly more reliable than listening to broadcasts.  Note that a
single component numeric address is not allowed, to avoid ambiguities.  If
more than one name is give, they will be used in a round-robin fashion.
.PP
Constraints:
.IP
.B minerr
must be less than
.B maxerr
which must be less than
.B delay
(or, if a NTP host is not specified
.BR delay / count "),"
and
.B count
must be less than half of
.BR delay .
.IP
In update mode,
.B maxerr
must be less than
.BR prompt.
.PP
Note that none of the above values are closely linked to the limits described
in the NTP protocol (RFC 1305).
.SH USAGE
The simplest use of this program is as an unprivileged command to check the
current time and error in the local clock.  For example:
.IP
.B sntp ntpserver.somewhere
.PP
With suitable privilege, it can be run as a command or in a
.I cron
job to reset the local clock from a reliable server, like the
.I ntpdate
and
.I rdate
commands.  For example:
.IP
.B sntp \-a ntpserver.somewhere
.PP
More information on how to use this utility is given in the
.I README
file in the distribution.  In particular, this
.I man
page does not describe how to set it up as a server, which needs special care
to avoid propagating misinformation.
.SH RETURN VALUE
When used as a client in non-daemon mode, the program returns a zero exit
status for success, and a non-zero one otherwise. When used as a daemon
(either client or server), it does not return except after a serious error.
.SH BUGS
The program implements the SNTP protocol, and does not provide all NTP 
facilities.  In particular, it contains no checks against any form of spoofing.
If this is a serious concern, some network security mechanism (like a firewall
or even just
.IR tcpwrappers )
should be installed.
.PP
There are some errors, ambiguities and inconsistencies in the RFCs, and this
code may not interwork with all other NTP implementations.  Any unreasonable
restrictions should be reported as bugs to whoever is responsible.  It may
be difficult to find out who that is.
.PP
The program will stop as soon as it feels that things have got out of control.
In client daemon mode, it will usually fail during an extended period of
network or server inaccessibility or excessively slow performance, or when the
local clock is reset by another process.  It will then need restarting
manually.  Experienced system administrators can write a shell script, a
.I cron
job or put it in
.IR inittab ,
to do this automatically.
.PP
The error cannot be estimated reliably with broadcast packets or for the drift
in daemon mode (even with client-server packets), and the guess made by the
program may be wrong (possibly even very wrong).  If this is a problem, then
setting the
.B \-c
option to a larger value may help.  Or it may not.
.SH AUTHOR
.I sntp
was developed by N.M. Maclaren of the University of Cambridge Computing
Service.
.SH OPTIONS
.TP
.BR \-4 ", " \--ipv4
Force IPv4 DNS name resolution.
This option is a member of the ipv4 class of options.
.sp
Force DNS resolution of following host names on the command line
to the IPv4 namespace.
.TP
.BR \-6 ", " \--ipv6
Force IPv6 DNS name resolution.
This option is a member of the ipv4 class of options.
.sp
Force DNS resolution of following host names on the command line
to the IPv6 namespace.
.TP
.BR \-u ", " \--unprivport
Use an unprivileged port.
.sp
Use an unprivilegded UDP port for our queries.
.TP
.BR \-v ", " \--normalverbose
Slightly verbose.
This option must not appear in combination with any of the following options:
extraverbose, megaverbose.
.sp
Diagnostic messages for non-fatal errors and a limited amount of
tracing should be written to standard error.  Fatal ones always
produce a diagnostic.  This option should be set when there is a
suspected problem with the server, network or the source.
.TP
.BR \-V ", " \--extraverbose
Extra verbose.
This option must not appear in combination with any of the following options:
normalverbose, megaverbose.
.sp
Produce more and less comprehensible output, mainly for investigating
problems with apparently inconsistent timestamps.  This option should
be set when the program fails with a message indicating that is the
trouble.
.TP
.BR \-W ", " \--megaverbose
Mega verbose.
This option must not appear in combination with any of the following options:
normalverbose, extraverbose.
.sp
Very verbose debugging output that will interfere with the timing
when writing to the terminal (because of line buffered output from C).
Note that the times produced by this are the corrections needed, and
not the error in the local clock.  This option should be set only when
debugging the source.
.TP
.BR \-r ", " \--settimeofday
Set (step) the time with settimeofday().
This option must not appear in combination with any of the following options:
adjtime.
.sp

.TP
.BR \-a ", " \--adjtime
Set (slew) the time with adjtime().
This option must not appear in combination with any of the following options:
settimeofday.
.sp

.TP
.BR \-? , " \--help"
Display usage information and exit.
.TP
.BR \-! , " \--more-help"
Extended usage information passed thru pager.
.TP
.BR \-> " [\fIrcfile\fP]," " \--save-opts" "[=\fIrcfile\fP]"
Save the option state to \fIrcfile\fP.  The default is the \fIlast\fP
configuration file listed in the \fBOPTION PRESETS\fP section, below.
.TP
.BR \-< " \fIrcfile\fP," " \--load-opts" "=\fIrcfile\fP," " \--no-load-opts"
Load options from \fIrcfile\fP.
The \fIno-load-opts\fP form will disable the loading
of earlier RC/INI files.  \fI--no-load-opts\fP is handled early,
out of order.
.TP
.BR \-v " [{\fIv|c|n\fP}]," " \--version" "[=\fI{v|c|n}\fP]"
Output version of program and exit.  The default mode is `v', a simple
version.  The `c' mode will print copyright information and `n' will
print the full copyright notice.
.SH OPTION PRESETS
Any option that is not marked as \fInot presettable\fP may be preset
by loading values from configuration ("RC" or ".INI") file(s) and values from
environment variables named:
.nf
  \fBSNTP_<option-name>\fP or \fBSNTP\fP
.fi
.aj
The environmental presets take precedence (are processed later than)
the configuration files.
The \fIhomerc\fP files are "\fI$HOME\fP", and "\fI.\fP".
If any of these are directories, then the file \fI.ntprc\fP
is searched for within those directories.
.SH AUTHOR
ntp.org
.br
Please send bug reports to:  http://bugs.ntp.org, bugs@ntp.org

.PP
.nf
.na
        General Public Licence for the software known as MSNTP
        \------------------------------------------------------

	  (c) Copyright, N.M. Maclaren, 1996, 1997, 2000
	  (c) Copyright, University of Cambridge, 1996, 1997, 2000



Free use of MSNTP in source and binary forms is permitted, provided that this
entire licence is duplicated in all copies, and that any documentation,
announcements, and other materials related to use acknowledge that the software
was developed by N.M. Maclaren (hereafter refered to as the Author) at the
University of Cambridge.  Neither the name of the Author nor the University of
Cambridge may be used to endorse or promote products derived from this material
without specific prior written permission.

The Author and the University of Cambridge retain the copyright and all other
legal rights to the software and make it available non-exclusively.  All users
must ensure that the software in all its derivations carries a copyright notice
in the form:
	  (c) Copyright N.M. Maclaren,
	  (c) Copyright University of Cambridge.



                           NO WARRANTY

Because the MSNTP software is licensed free of charge, the Author and the
University of Cambridge provide absolutely no warranty, either expressed or
implied, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.  The entire risk as to
the quality and performance of the MSNTP software is with you.  Should MSNTP
prove defective, you assume the cost of all necessary servicing or repair.

In no event, unless required by law, will the Author or the University of
Cambridge, or any other party who may modify and redistribute this software as
permitted in accordance with the provisions below, be liable for damages for
any losses whatsoever, including but not limited to lost profits, lost monies,
lost or corrupted data, or other special, incidental or consequential losses
that may arise out of the use or inability to use the MSNTP software.



                         COPYING POLICY

Permission is hereby granted for copying and distribution of copies of the
MSNTP source and binary files, and of any part thereof, subject to the
following licence conditions:

1. You may distribute MSNTP or components of MSNTP, with or without additions
developed by you or by others.  No charge, other than an "at-cost" distribution
fee, may be charged for copies, derivations, or distributions of this material
without the express written consent of the copyright holders.

2. You may also distribute MSNTP along with any other product for sale,
provided that the cost of the bundled package is the same regardless of whether
MSNTP is included or not, and provided that those interested only in MSNTP must
be notified that it is a product freely available from the University of
Cambridge.

3. If you distribute MSNTP software or parts of MSNTP, with or without
additions developed by you or others, then you must either make available the
source to all portions of the MSNTP system (exclusive of any additions made by
you or by others) upon request, or instead you may notify anyone requesting
source that it is freely available from the University of Cambridge.

4. You may not omit any of the copyright notices on either the source files,
the executable files, or the documentation.

5. You may not omit transmission of this License agreement with whatever
portions of MSNTP that are distributed.

6. Any users of this software must be notified that it is without warranty or
guarantee of any nature, express or implied, nor is there any fitness for use
represented.


October 1996
April 1997
October 2000
.fi
.ad
.PP
This manual page was \fIAutoGen\fP-erated from the \fBsntp\fP
option definitions.